| /* | 
 |  * Copyright (c) 2005 Ammasso, Inc. All rights reserved. | 
 |  * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. | 
 |  * | 
 |  * This software is available to you under a choice of one of two | 
 |  * licenses.  You may choose to be licensed under the terms of the GNU | 
 |  * General Public License (GPL) Version 2, available from the file | 
 |  * COPYING in the main directory of this source tree, or the | 
 |  * OpenIB.org BSD license below: | 
 |  * | 
 |  *     Redistribution and use in source and binary forms, with or | 
 |  *     without modification, are permitted provided that the following | 
 |  *     conditions are met: | 
 |  * | 
 |  *      - Redistributions of source code must retain the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer. | 
 |  * | 
 |  *      - Redistributions in binary form must reproduce the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer in the documentation and/or other materials | 
 |  *        provided with the distribution. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
 |  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
 |  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
 |  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | 
 |  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | 
 |  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | 
 |  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | 
 |  * SOFTWARE. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/inetdevice.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/if_vlan.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/in.h> | 
 | #include <linux/ip.h> | 
 | #include <linux/tcp.h> | 
 | #include <linux/init.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/byteorder.h> | 
 |  | 
 | #include <rdma/ib_smi.h> | 
 | #include "c2.h" | 
 | #include "c2_provider.h" | 
 |  | 
 | MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>"); | 
 | MODULE_DESCRIPTION("Ammasso AMSO1100 Low-level iWARP Driver"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); | 
 | MODULE_VERSION(DRV_VERSION); | 
 |  | 
 | static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | 
 |     | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; | 
 |  | 
 | static int debug = -1;		/* defaults above */ | 
 | module_param(debug, int, 0); | 
 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | 
 |  | 
 | static int c2_up(struct net_device *netdev); | 
 | static int c2_down(struct net_device *netdev); | 
 | static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev); | 
 | static void c2_tx_interrupt(struct net_device *netdev); | 
 | static void c2_rx_interrupt(struct net_device *netdev); | 
 | static irqreturn_t c2_interrupt(int irq, void *dev_id); | 
 | static void c2_tx_timeout(struct net_device *netdev); | 
 | static int c2_change_mtu(struct net_device *netdev, int new_mtu); | 
 | static void c2_reset(struct c2_port *c2_port); | 
 |  | 
 | static struct pci_device_id c2_pci_table[] = { | 
 | 	{ PCI_DEVICE(0x18b8, 0xb001) }, | 
 | 	{ 0 } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, c2_pci_table); | 
 |  | 
 | static void c2_print_macaddr(struct net_device *netdev) | 
 | { | 
 | 	pr_debug("%s: MAC %pM, IRQ %u\n", netdev->name, netdev->dev_addr, netdev->irq); | 
 | } | 
 |  | 
 | static void c2_set_rxbufsize(struct c2_port *c2_port) | 
 | { | 
 | 	struct net_device *netdev = c2_port->netdev; | 
 |  | 
 | 	if (netdev->mtu > RX_BUF_SIZE) | 
 | 		c2_port->rx_buf_size = | 
 | 		    netdev->mtu + ETH_HLEN + sizeof(struct c2_rxp_hdr) + | 
 | 		    NET_IP_ALIGN; | 
 | 	else | 
 | 		c2_port->rx_buf_size = sizeof(struct c2_rxp_hdr) + RX_BUF_SIZE; | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate TX ring elements and chain them together. | 
 |  * One-to-one association of adapter descriptors with ring elements. | 
 |  */ | 
 | static int c2_tx_ring_alloc(struct c2_ring *tx_ring, void *vaddr, | 
 | 			    dma_addr_t base, void __iomem * mmio_txp_ring) | 
 | { | 
 | 	struct c2_tx_desc *tx_desc; | 
 | 	struct c2_txp_desc __iomem *txp_desc; | 
 | 	struct c2_element *elem; | 
 | 	int i; | 
 |  | 
 | 	tx_ring->start = kmalloc(sizeof(*elem) * tx_ring->count, GFP_KERNEL); | 
 | 	if (!tx_ring->start) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	elem = tx_ring->start; | 
 | 	tx_desc = vaddr; | 
 | 	txp_desc = mmio_txp_ring; | 
 | 	for (i = 0; i < tx_ring->count; i++, elem++, tx_desc++, txp_desc++) { | 
 | 		tx_desc->len = 0; | 
 | 		tx_desc->status = 0; | 
 |  | 
 | 		/* Set TXP_HTXD_UNINIT */ | 
 | 		__raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL), | 
 | 			     (void __iomem *) txp_desc + C2_TXP_ADDR); | 
 | 		__raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN); | 
 | 		__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT), | 
 | 			     (void __iomem *) txp_desc + C2_TXP_FLAGS); | 
 |  | 
 | 		elem->skb = NULL; | 
 | 		elem->ht_desc = tx_desc; | 
 | 		elem->hw_desc = txp_desc; | 
 |  | 
 | 		if (i == tx_ring->count - 1) { | 
 | 			elem->next = tx_ring->start; | 
 | 			tx_desc->next_offset = base; | 
 | 		} else { | 
 | 			elem->next = elem + 1; | 
 | 			tx_desc->next_offset = | 
 | 			    base + (i + 1) * sizeof(*tx_desc); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	tx_ring->to_use = tx_ring->to_clean = tx_ring->start; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate RX ring elements and chain them together. | 
 |  * One-to-one association of adapter descriptors with ring elements. | 
 |  */ | 
 | static int c2_rx_ring_alloc(struct c2_ring *rx_ring, void *vaddr, | 
 | 			    dma_addr_t base, void __iomem * mmio_rxp_ring) | 
 | { | 
 | 	struct c2_rx_desc *rx_desc; | 
 | 	struct c2_rxp_desc __iomem *rxp_desc; | 
 | 	struct c2_element *elem; | 
 | 	int i; | 
 |  | 
 | 	rx_ring->start = kmalloc(sizeof(*elem) * rx_ring->count, GFP_KERNEL); | 
 | 	if (!rx_ring->start) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	elem = rx_ring->start; | 
 | 	rx_desc = vaddr; | 
 | 	rxp_desc = mmio_rxp_ring; | 
 | 	for (i = 0; i < rx_ring->count; i++, elem++, rx_desc++, rxp_desc++) { | 
 | 		rx_desc->len = 0; | 
 | 		rx_desc->status = 0; | 
 |  | 
 | 		/* Set RXP_HRXD_UNINIT */ | 
 | 		__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_OK), | 
 | 		       (void __iomem *) rxp_desc + C2_RXP_STATUS); | 
 | 		__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT); | 
 | 		__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN); | 
 | 		__raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL), | 
 | 			     (void __iomem *) rxp_desc + C2_RXP_ADDR); | 
 | 		__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT), | 
 | 			     (void __iomem *) rxp_desc + C2_RXP_FLAGS); | 
 |  | 
 | 		elem->skb = NULL; | 
 | 		elem->ht_desc = rx_desc; | 
 | 		elem->hw_desc = rxp_desc; | 
 |  | 
 | 		if (i == rx_ring->count - 1) { | 
 | 			elem->next = rx_ring->start; | 
 | 			rx_desc->next_offset = base; | 
 | 		} else { | 
 | 			elem->next = elem + 1; | 
 | 			rx_desc->next_offset = | 
 | 			    base + (i + 1) * sizeof(*rx_desc); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rx_ring->to_use = rx_ring->to_clean = rx_ring->start; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Setup buffer for receiving */ | 
 | static inline int c2_rx_alloc(struct c2_port *c2_port, struct c2_element *elem) | 
 | { | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_rx_desc *rx_desc = elem->ht_desc; | 
 | 	struct sk_buff *skb; | 
 | 	dma_addr_t mapaddr; | 
 | 	u32 maplen; | 
 | 	struct c2_rxp_hdr *rxp_hdr; | 
 |  | 
 | 	skb = dev_alloc_skb(c2_port->rx_buf_size); | 
 | 	if (unlikely(!skb)) { | 
 | 		pr_debug("%s: out of memory for receive\n", | 
 | 			c2_port->netdev->name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* Zero out the rxp hdr in the sk_buff */ | 
 | 	memset(skb->data, 0, sizeof(*rxp_hdr)); | 
 |  | 
 | 	skb->dev = c2_port->netdev; | 
 |  | 
 | 	maplen = c2_port->rx_buf_size; | 
 | 	mapaddr = | 
 | 	    pci_map_single(c2dev->pcidev, skb->data, maplen, | 
 | 			   PCI_DMA_FROMDEVICE); | 
 |  | 
 | 	/* Set the sk_buff RXP_header to RXP_HRXD_READY */ | 
 | 	rxp_hdr = (struct c2_rxp_hdr *) skb->data; | 
 | 	rxp_hdr->flags = RXP_HRXD_READY; | 
 |  | 
 | 	__raw_writew(0, elem->hw_desc + C2_RXP_STATUS); | 
 | 	__raw_writew((__force u16) cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)), | 
 | 		     elem->hw_desc + C2_RXP_LEN); | 
 | 	__raw_writeq((__force u64) cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR); | 
 | 	__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), | 
 | 		     elem->hw_desc + C2_RXP_FLAGS); | 
 |  | 
 | 	elem->skb = skb; | 
 | 	elem->mapaddr = mapaddr; | 
 | 	elem->maplen = maplen; | 
 | 	rx_desc->len = maplen; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate buffers for the Rx ring | 
 |  * For receive:  rx_ring.to_clean is next received frame | 
 |  */ | 
 | static int c2_rx_fill(struct c2_port *c2_port) | 
 | { | 
 | 	struct c2_ring *rx_ring = &c2_port->rx_ring; | 
 | 	struct c2_element *elem; | 
 | 	int ret = 0; | 
 |  | 
 | 	elem = rx_ring->start; | 
 | 	do { | 
 | 		if (c2_rx_alloc(c2_port, elem)) { | 
 | 			ret = 1; | 
 | 			break; | 
 | 		} | 
 | 	} while ((elem = elem->next) != rx_ring->start); | 
 |  | 
 | 	rx_ring->to_clean = rx_ring->start; | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Free all buffers in RX ring, assumes receiver stopped */ | 
 | static void c2_rx_clean(struct c2_port *c2_port) | 
 | { | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_ring *rx_ring = &c2_port->rx_ring; | 
 | 	struct c2_element *elem; | 
 | 	struct c2_rx_desc *rx_desc; | 
 |  | 
 | 	elem = rx_ring->start; | 
 | 	do { | 
 | 		rx_desc = elem->ht_desc; | 
 | 		rx_desc->len = 0; | 
 |  | 
 | 		__raw_writew(0, elem->hw_desc + C2_RXP_STATUS); | 
 | 		__raw_writew(0, elem->hw_desc + C2_RXP_COUNT); | 
 | 		__raw_writew(0, elem->hw_desc + C2_RXP_LEN); | 
 | 		__raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL), | 
 | 			     elem->hw_desc + C2_RXP_ADDR); | 
 | 		__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT), | 
 | 			     elem->hw_desc + C2_RXP_FLAGS); | 
 |  | 
 | 		if (elem->skb) { | 
 | 			pci_unmap_single(c2dev->pcidev, elem->mapaddr, | 
 | 					 elem->maplen, PCI_DMA_FROMDEVICE); | 
 | 			dev_kfree_skb(elem->skb); | 
 | 			elem->skb = NULL; | 
 | 		} | 
 | 	} while ((elem = elem->next) != rx_ring->start); | 
 | } | 
 |  | 
 | static inline int c2_tx_free(struct c2_dev *c2dev, struct c2_element *elem) | 
 | { | 
 | 	struct c2_tx_desc *tx_desc = elem->ht_desc; | 
 |  | 
 | 	tx_desc->len = 0; | 
 |  | 
 | 	pci_unmap_single(c2dev->pcidev, elem->mapaddr, elem->maplen, | 
 | 			 PCI_DMA_TODEVICE); | 
 |  | 
 | 	if (elem->skb) { | 
 | 		dev_kfree_skb_any(elem->skb); | 
 | 		elem->skb = NULL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Free all buffers in TX ring, assumes transmitter stopped */ | 
 | static void c2_tx_clean(struct c2_port *c2_port) | 
 | { | 
 | 	struct c2_ring *tx_ring = &c2_port->tx_ring; | 
 | 	struct c2_element *elem; | 
 | 	struct c2_txp_desc txp_htxd; | 
 | 	int retry; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&c2_port->tx_lock, flags); | 
 |  | 
 | 	elem = tx_ring->start; | 
 |  | 
 | 	do { | 
 | 		retry = 0; | 
 | 		do { | 
 | 			txp_htxd.flags = | 
 | 			    readw(elem->hw_desc + C2_TXP_FLAGS); | 
 |  | 
 | 			if (txp_htxd.flags == TXP_HTXD_READY) { | 
 | 				retry = 1; | 
 | 				__raw_writew(0, | 
 | 					     elem->hw_desc + C2_TXP_LEN); | 
 | 				__raw_writeq(0, | 
 | 					     elem->hw_desc + C2_TXP_ADDR); | 
 | 				__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_DONE), | 
 | 					     elem->hw_desc + C2_TXP_FLAGS); | 
 | 				c2_port->netdev->stats.tx_dropped++; | 
 | 				break; | 
 | 			} else { | 
 | 				__raw_writew(0, | 
 | 					     elem->hw_desc + C2_TXP_LEN); | 
 | 				__raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL), | 
 | 					     elem->hw_desc + C2_TXP_ADDR); | 
 | 				__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT), | 
 | 					     elem->hw_desc + C2_TXP_FLAGS); | 
 | 			} | 
 |  | 
 | 			c2_tx_free(c2_port->c2dev, elem); | 
 |  | 
 | 		} while ((elem = elem->next) != tx_ring->start); | 
 | 	} while (retry); | 
 |  | 
 | 	c2_port->tx_avail = c2_port->tx_ring.count - 1; | 
 | 	c2_port->c2dev->cur_tx = tx_ring->to_use - tx_ring->start; | 
 |  | 
 | 	if (c2_port->tx_avail > MAX_SKB_FRAGS + 1) | 
 | 		netif_wake_queue(c2_port->netdev); | 
 |  | 
 | 	spin_unlock_irqrestore(&c2_port->tx_lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Process transmit descriptors marked 'DONE' by the firmware, | 
 |  * freeing up their unneeded sk_buffs. | 
 |  */ | 
 | static void c2_tx_interrupt(struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_ring *tx_ring = &c2_port->tx_ring; | 
 | 	struct c2_element *elem; | 
 | 	struct c2_txp_desc txp_htxd; | 
 |  | 
 | 	spin_lock(&c2_port->tx_lock); | 
 |  | 
 | 	for (elem = tx_ring->to_clean; elem != tx_ring->to_use; | 
 | 	     elem = elem->next) { | 
 | 		txp_htxd.flags = | 
 | 		    be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_FLAGS)); | 
 |  | 
 | 		if (txp_htxd.flags != TXP_HTXD_DONE) | 
 | 			break; | 
 |  | 
 | 		if (netif_msg_tx_done(c2_port)) { | 
 | 			/* PCI reads are expensive in fast path */ | 
 | 			txp_htxd.len = | 
 | 			    be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_LEN)); | 
 | 			pr_debug("%s: tx done slot %3Zu status 0x%x len " | 
 | 				"%5u bytes\n", | 
 | 				netdev->name, elem - tx_ring->start, | 
 | 				txp_htxd.flags, txp_htxd.len); | 
 | 		} | 
 |  | 
 | 		c2_tx_free(c2dev, elem); | 
 | 		++(c2_port->tx_avail); | 
 | 	} | 
 |  | 
 | 	tx_ring->to_clean = elem; | 
 |  | 
 | 	if (netif_queue_stopped(netdev) | 
 | 	    && c2_port->tx_avail > MAX_SKB_FRAGS + 1) | 
 | 		netif_wake_queue(netdev); | 
 |  | 
 | 	spin_unlock(&c2_port->tx_lock); | 
 | } | 
 |  | 
 | static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem) | 
 | { | 
 | 	struct c2_rx_desc *rx_desc = elem->ht_desc; | 
 | 	struct c2_rxp_hdr *rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; | 
 |  | 
 | 	if (rxp_hdr->status != RXP_HRXD_OK || | 
 | 	    rxp_hdr->len > (rx_desc->len - sizeof(*rxp_hdr))) { | 
 | 		pr_debug("BAD RXP_HRXD\n"); | 
 | 		pr_debug("  rx_desc : %p\n", rx_desc); | 
 | 		pr_debug("    index : %Zu\n", | 
 | 			elem - c2_port->rx_ring.start); | 
 | 		pr_debug("    len   : %u\n", rx_desc->len); | 
 | 		pr_debug("  rxp_hdr : %p [PA %p]\n", rxp_hdr, | 
 | 			(void *) __pa((unsigned long) rxp_hdr)); | 
 | 		pr_debug("    flags : 0x%x\n", rxp_hdr->flags); | 
 | 		pr_debug("    status: 0x%x\n", rxp_hdr->status); | 
 | 		pr_debug("    len   : %u\n", rxp_hdr->len); | 
 | 		pr_debug("    rsvd  : 0x%x\n", rxp_hdr->rsvd); | 
 | 	} | 
 |  | 
 | 	/* Setup the skb for reuse since we're dropping this pkt */ | 
 | 	elem->skb->data = elem->skb->head; | 
 | 	skb_reset_tail_pointer(elem->skb); | 
 |  | 
 | 	/* Zero out the rxp hdr in the sk_buff */ | 
 | 	memset(elem->skb->data, 0, sizeof(*rxp_hdr)); | 
 |  | 
 | 	/* Write the descriptor to the adapter's rx ring */ | 
 | 	__raw_writew(0, elem->hw_desc + C2_RXP_STATUS); | 
 | 	__raw_writew(0, elem->hw_desc + C2_RXP_COUNT); | 
 | 	__raw_writew((__force u16) cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)), | 
 | 		     elem->hw_desc + C2_RXP_LEN); | 
 | 	__raw_writeq((__force u64) cpu_to_be64(elem->mapaddr), | 
 | 		     elem->hw_desc + C2_RXP_ADDR); | 
 | 	__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), | 
 | 		     elem->hw_desc + C2_RXP_FLAGS); | 
 |  | 
 | 	pr_debug("packet dropped\n"); | 
 | 	c2_port->netdev->stats.rx_dropped++; | 
 | } | 
 |  | 
 | static void c2_rx_interrupt(struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_ring *rx_ring = &c2_port->rx_ring; | 
 | 	struct c2_element *elem; | 
 | 	struct c2_rx_desc *rx_desc; | 
 | 	struct c2_rxp_hdr *rxp_hdr; | 
 | 	struct sk_buff *skb; | 
 | 	dma_addr_t mapaddr; | 
 | 	u32 maplen, buflen; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&c2dev->lock, flags); | 
 |  | 
 | 	/* Begin where we left off */ | 
 | 	rx_ring->to_clean = rx_ring->start + c2dev->cur_rx; | 
 |  | 
 | 	for (elem = rx_ring->to_clean; elem->next != rx_ring->to_clean; | 
 | 	     elem = elem->next) { | 
 | 		rx_desc = elem->ht_desc; | 
 | 		mapaddr = elem->mapaddr; | 
 | 		maplen = elem->maplen; | 
 | 		skb = elem->skb; | 
 | 		rxp_hdr = (struct c2_rxp_hdr *) skb->data; | 
 |  | 
 | 		if (rxp_hdr->flags != RXP_HRXD_DONE) | 
 | 			break; | 
 | 		buflen = rxp_hdr->len; | 
 |  | 
 | 		/* Sanity check the RXP header */ | 
 | 		if (rxp_hdr->status != RXP_HRXD_OK || | 
 | 		    buflen > (rx_desc->len - sizeof(*rxp_hdr))) { | 
 | 			c2_rx_error(c2_port, elem); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Allocate and map a new skb for replenishing the host | 
 | 		 * RX desc | 
 | 		 */ | 
 | 		if (c2_rx_alloc(c2_port, elem)) { | 
 | 			c2_rx_error(c2_port, elem); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Unmap the old skb */ | 
 | 		pci_unmap_single(c2dev->pcidev, mapaddr, maplen, | 
 | 				 PCI_DMA_FROMDEVICE); | 
 |  | 
 | 		prefetch(skb->data); | 
 |  | 
 | 		/* | 
 | 		 * Skip past the leading 8 bytes comprising of the | 
 | 		 * "struct c2_rxp_hdr", prepended by the adapter | 
 | 		 * to the usual Ethernet header ("struct ethhdr"), | 
 | 		 * to the start of the raw Ethernet packet. | 
 | 		 * | 
 | 		 * Fix up the various fields in the sk_buff before | 
 | 		 * passing it up to netif_rx(). The transfer size | 
 | 		 * (in bytes) specified by the adapter len field of | 
 | 		 * the "struct rxp_hdr_t" does NOT include the | 
 | 		 * "sizeof(struct c2_rxp_hdr)". | 
 | 		 */ | 
 | 		skb->data += sizeof(*rxp_hdr); | 
 | 		skb_set_tail_pointer(skb, buflen); | 
 | 		skb->len = buflen; | 
 | 		skb->protocol = eth_type_trans(skb, netdev); | 
 |  | 
 | 		netif_rx(skb); | 
 |  | 
 | 		netdev->stats.rx_packets++; | 
 | 		netdev->stats.rx_bytes += buflen; | 
 | 	} | 
 |  | 
 | 	/* Save where we left off */ | 
 | 	rx_ring->to_clean = elem; | 
 | 	c2dev->cur_rx = elem - rx_ring->start; | 
 | 	C2_SET_CUR_RX(c2dev, c2dev->cur_rx); | 
 |  | 
 | 	spin_unlock_irqrestore(&c2dev->lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle netisr0 TX & RX interrupts. | 
 |  */ | 
 | static irqreturn_t c2_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	unsigned int netisr0, dmaisr; | 
 | 	int handled = 0; | 
 | 	struct c2_dev *c2dev = (struct c2_dev *) dev_id; | 
 |  | 
 | 	/* Process CCILNET interrupts */ | 
 | 	netisr0 = readl(c2dev->regs + C2_NISR0); | 
 | 	if (netisr0) { | 
 |  | 
 | 		/* | 
 | 		 * There is an issue with the firmware that always | 
 | 		 * provides the status of RX for both TX & RX | 
 | 		 * interrupts.  So process both queues here. | 
 | 		 */ | 
 | 		c2_rx_interrupt(c2dev->netdev); | 
 | 		c2_tx_interrupt(c2dev->netdev); | 
 |  | 
 | 		/* Clear the interrupt */ | 
 | 		writel(netisr0, c2dev->regs + C2_NISR0); | 
 | 		handled++; | 
 | 	} | 
 |  | 
 | 	/* Process RNIC interrupts */ | 
 | 	dmaisr = readl(c2dev->regs + C2_DISR); | 
 | 	if (dmaisr) { | 
 | 		writel(dmaisr, c2dev->regs + C2_DISR); | 
 | 		c2_rnic_interrupt(c2dev); | 
 | 		handled++; | 
 | 	} | 
 |  | 
 | 	if (handled) { | 
 | 		return IRQ_HANDLED; | 
 | 	} else { | 
 | 		return IRQ_NONE; | 
 | 	} | 
 | } | 
 |  | 
 | static int c2_up(struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_element *elem; | 
 | 	struct c2_rxp_hdr *rxp_hdr; | 
 | 	struct in_device *in_dev; | 
 | 	size_t rx_size, tx_size; | 
 | 	int ret, i; | 
 | 	unsigned int netimr0; | 
 |  | 
 | 	if (netif_msg_ifup(c2_port)) | 
 | 		pr_debug("%s: enabling interface\n", netdev->name); | 
 |  | 
 | 	/* Set the Rx buffer size based on MTU */ | 
 | 	c2_set_rxbufsize(c2_port); | 
 |  | 
 | 	/* Allocate DMA'able memory for Tx/Rx host descriptor rings */ | 
 | 	rx_size = c2_port->rx_ring.count * sizeof(struct c2_rx_desc); | 
 | 	tx_size = c2_port->tx_ring.count * sizeof(struct c2_tx_desc); | 
 |  | 
 | 	c2_port->mem_size = tx_size + rx_size; | 
 | 	c2_port->mem = pci_alloc_consistent(c2dev->pcidev, c2_port->mem_size, | 
 | 					    &c2_port->dma); | 
 | 	if (c2_port->mem == NULL) { | 
 | 		pr_debug("Unable to allocate memory for " | 
 | 			"host descriptor rings\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	memset(c2_port->mem, 0, c2_port->mem_size); | 
 |  | 
 | 	/* Create the Rx host descriptor ring */ | 
 | 	if ((ret = | 
 | 	     c2_rx_ring_alloc(&c2_port->rx_ring, c2_port->mem, c2_port->dma, | 
 | 			      c2dev->mmio_rxp_ring))) { | 
 | 		pr_debug("Unable to create RX ring\n"); | 
 | 		goto bail0; | 
 | 	} | 
 |  | 
 | 	/* Allocate Rx buffers for the host descriptor ring */ | 
 | 	if (c2_rx_fill(c2_port)) { | 
 | 		pr_debug("Unable to fill RX ring\n"); | 
 | 		goto bail1; | 
 | 	} | 
 |  | 
 | 	/* Create the Tx host descriptor ring */ | 
 | 	if ((ret = c2_tx_ring_alloc(&c2_port->tx_ring, c2_port->mem + rx_size, | 
 | 				    c2_port->dma + rx_size, | 
 | 				    c2dev->mmio_txp_ring))) { | 
 | 		pr_debug("Unable to create TX ring\n"); | 
 | 		goto bail1; | 
 | 	} | 
 |  | 
 | 	/* Set the TX pointer to where we left off */ | 
 | 	c2_port->tx_avail = c2_port->tx_ring.count - 1; | 
 | 	c2_port->tx_ring.to_use = c2_port->tx_ring.to_clean = | 
 | 	    c2_port->tx_ring.start + c2dev->cur_tx; | 
 |  | 
 | 	/* missing: Initialize MAC */ | 
 |  | 
 | 	BUG_ON(c2_port->tx_ring.to_use != c2_port->tx_ring.to_clean); | 
 |  | 
 | 	/* Reset the adapter, ensures the driver is in sync with the RXP */ | 
 | 	c2_reset(c2_port); | 
 |  | 
 | 	/* Reset the READY bit in the sk_buff RXP headers & adapter HRXDQ */ | 
 | 	for (i = 0, elem = c2_port->rx_ring.start; i < c2_port->rx_ring.count; | 
 | 	     i++, elem++) { | 
 | 		rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; | 
 | 		rxp_hdr->flags = 0; | 
 | 		__raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), | 
 | 			     elem->hw_desc + C2_RXP_FLAGS); | 
 | 	} | 
 |  | 
 | 	/* Enable network packets */ | 
 | 	netif_start_queue(netdev); | 
 |  | 
 | 	/* Enable IRQ */ | 
 | 	writel(0, c2dev->regs + C2_IDIS); | 
 | 	netimr0 = readl(c2dev->regs + C2_NIMR0); | 
 | 	netimr0 &= ~(C2_PCI_HTX_INT | C2_PCI_HRX_INT); | 
 | 	writel(netimr0, c2dev->regs + C2_NIMR0); | 
 |  | 
 | 	/* Tell the stack to ignore arp requests for ipaddrs bound to | 
 | 	 * other interfaces.  This is needed to prevent the host stack | 
 | 	 * from responding to arp requests to the ipaddr bound on the | 
 | 	 * rdma interface. | 
 | 	 */ | 
 | 	in_dev = in_dev_get(netdev); | 
 | 	IN_DEV_CONF_SET(in_dev, ARP_IGNORE, 1); | 
 | 	in_dev_put(in_dev); | 
 |  | 
 | 	return 0; | 
 |  | 
 |       bail1: | 
 | 	c2_rx_clean(c2_port); | 
 | 	kfree(c2_port->rx_ring.start); | 
 |  | 
 |       bail0: | 
 | 	pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, | 
 | 			    c2_port->dma); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int c2_down(struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 |  | 
 | 	if (netif_msg_ifdown(c2_port)) | 
 | 		pr_debug("%s: disabling interface\n", | 
 | 			netdev->name); | 
 |  | 
 | 	/* Wait for all the queued packets to get sent */ | 
 | 	c2_tx_interrupt(netdev); | 
 |  | 
 | 	/* Disable network packets */ | 
 | 	netif_stop_queue(netdev); | 
 |  | 
 | 	/* Disable IRQs by clearing the interrupt mask */ | 
 | 	writel(1, c2dev->regs + C2_IDIS); | 
 | 	writel(0, c2dev->regs + C2_NIMR0); | 
 |  | 
 | 	/* missing: Stop transmitter */ | 
 |  | 
 | 	/* missing: Stop receiver */ | 
 |  | 
 | 	/* Reset the adapter, ensures the driver is in sync with the RXP */ | 
 | 	c2_reset(c2_port); | 
 |  | 
 | 	/* missing: Turn off LEDs here */ | 
 |  | 
 | 	/* Free all buffers in the host descriptor rings */ | 
 | 	c2_tx_clean(c2_port); | 
 | 	c2_rx_clean(c2_port); | 
 |  | 
 | 	/* Free the host descriptor rings */ | 
 | 	kfree(c2_port->rx_ring.start); | 
 | 	kfree(c2_port->tx_ring.start); | 
 | 	pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, | 
 | 			    c2_port->dma); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void c2_reset(struct c2_port *c2_port) | 
 | { | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	unsigned int cur_rx = c2dev->cur_rx; | 
 |  | 
 | 	/* Tell the hardware to quiesce */ | 
 | 	C2_SET_CUR_RX(c2dev, cur_rx | C2_PCI_HRX_QUI); | 
 |  | 
 | 	/* | 
 | 	 * The hardware will reset the C2_PCI_HRX_QUI bit once | 
 | 	 * the RXP is quiesced.  Wait 2 seconds for this. | 
 | 	 */ | 
 | 	ssleep(2); | 
 |  | 
 | 	cur_rx = C2_GET_CUR_RX(c2dev); | 
 |  | 
 | 	if (cur_rx & C2_PCI_HRX_QUI) | 
 | 		pr_debug("c2_reset: failed to quiesce the hardware!\n"); | 
 |  | 
 | 	cur_rx &= ~C2_PCI_HRX_QUI; | 
 |  | 
 | 	c2dev->cur_rx = cur_rx; | 
 |  | 
 | 	pr_debug("Current RX: %u\n", c2dev->cur_rx); | 
 | } | 
 |  | 
 | static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 | 	struct c2_dev *c2dev = c2_port->c2dev; | 
 | 	struct c2_ring *tx_ring = &c2_port->tx_ring; | 
 | 	struct c2_element *elem; | 
 | 	dma_addr_t mapaddr; | 
 | 	u32 maplen; | 
 | 	unsigned long flags; | 
 | 	unsigned int i; | 
 |  | 
 | 	spin_lock_irqsave(&c2_port->tx_lock, flags); | 
 |  | 
 | 	if (unlikely(c2_port->tx_avail < (skb_shinfo(skb)->nr_frags + 1))) { | 
 | 		netif_stop_queue(netdev); | 
 | 		spin_unlock_irqrestore(&c2_port->tx_lock, flags); | 
 |  | 
 | 		pr_debug("%s: Tx ring full when queue awake!\n", | 
 | 			netdev->name); | 
 | 		return NETDEV_TX_BUSY; | 
 | 	} | 
 |  | 
 | 	maplen = skb_headlen(skb); | 
 | 	mapaddr = | 
 | 	    pci_map_single(c2dev->pcidev, skb->data, maplen, PCI_DMA_TODEVICE); | 
 |  | 
 | 	elem = tx_ring->to_use; | 
 | 	elem->skb = skb; | 
 | 	elem->mapaddr = mapaddr; | 
 | 	elem->maplen = maplen; | 
 |  | 
 | 	/* Tell HW to xmit */ | 
 | 	__raw_writeq((__force u64) cpu_to_be64(mapaddr), | 
 | 		     elem->hw_desc + C2_TXP_ADDR); | 
 | 	__raw_writew((__force u16) cpu_to_be16(maplen), | 
 | 		     elem->hw_desc + C2_TXP_LEN); | 
 | 	__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY), | 
 | 		     elem->hw_desc + C2_TXP_FLAGS); | 
 |  | 
 | 	netdev->stats.tx_packets++; | 
 | 	netdev->stats.tx_bytes += maplen; | 
 |  | 
 | 	/* Loop thru additional data fragments and queue them */ | 
 | 	if (skb_shinfo(skb)->nr_frags) { | 
 | 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | 
 | 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | 
 | 			maplen = frag->size; | 
 | 			mapaddr = | 
 | 			    pci_map_page(c2dev->pcidev, frag->page, | 
 | 					 frag->page_offset, maplen, | 
 | 					 PCI_DMA_TODEVICE); | 
 |  | 
 | 			elem = elem->next; | 
 | 			elem->skb = NULL; | 
 | 			elem->mapaddr = mapaddr; | 
 | 			elem->maplen = maplen; | 
 |  | 
 | 			/* Tell HW to xmit */ | 
 | 			__raw_writeq((__force u64) cpu_to_be64(mapaddr), | 
 | 				     elem->hw_desc + C2_TXP_ADDR); | 
 | 			__raw_writew((__force u16) cpu_to_be16(maplen), | 
 | 				     elem->hw_desc + C2_TXP_LEN); | 
 | 			__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY), | 
 | 				     elem->hw_desc + C2_TXP_FLAGS); | 
 |  | 
 | 			netdev->stats.tx_packets++; | 
 | 			netdev->stats.tx_bytes += maplen; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	tx_ring->to_use = elem->next; | 
 | 	c2_port->tx_avail -= (skb_shinfo(skb)->nr_frags + 1); | 
 |  | 
 | 	if (c2_port->tx_avail <= MAX_SKB_FRAGS + 1) { | 
 | 		netif_stop_queue(netdev); | 
 | 		if (netif_msg_tx_queued(c2_port)) | 
 | 			pr_debug("%s: transmit queue full\n", | 
 | 				netdev->name); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&c2_port->tx_lock, flags); | 
 |  | 
 | 	netdev->trans_start = jiffies; | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 | static void c2_tx_timeout(struct net_device *netdev) | 
 | { | 
 | 	struct c2_port *c2_port = netdev_priv(netdev); | 
 |  | 
 | 	if (netif_msg_timer(c2_port)) | 
 | 		pr_debug("%s: tx timeout\n", netdev->name); | 
 |  | 
 | 	c2_tx_clean(c2_port); | 
 | } | 
 |  | 
 | static int c2_change_mtu(struct net_device *netdev, int new_mtu) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) | 
 | 		return -EINVAL; | 
 |  | 
 | 	netdev->mtu = new_mtu; | 
 |  | 
 | 	if (netif_running(netdev)) { | 
 | 		c2_down(netdev); | 
 |  | 
 | 		c2_up(netdev); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct net_device_ops c2_netdev = { | 
 | 	.ndo_open 		= c2_up, | 
 | 	.ndo_stop 		= c2_down, | 
 | 	.ndo_start_xmit		= c2_xmit_frame, | 
 | 	.ndo_tx_timeout		= c2_tx_timeout, | 
 | 	.ndo_change_mtu		= c2_change_mtu, | 
 | 	.ndo_set_mac_address 	= eth_mac_addr, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | }; | 
 |  | 
 | /* Initialize network device */ | 
 | static struct net_device *c2_devinit(struct c2_dev *c2dev, | 
 | 				     void __iomem * mmio_addr) | 
 | { | 
 | 	struct c2_port *c2_port = NULL; | 
 | 	struct net_device *netdev = alloc_etherdev(sizeof(*c2_port)); | 
 |  | 
 | 	if (!netdev) { | 
 | 		pr_debug("c2_port etherdev alloc failed"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev); | 
 |  | 
 | 	netdev->netdev_ops = &c2_netdev; | 
 | 	netdev->watchdog_timeo = C2_TX_TIMEOUT; | 
 | 	netdev->irq = c2dev->pcidev->irq; | 
 |  | 
 | 	c2_port = netdev_priv(netdev); | 
 | 	c2_port->netdev = netdev; | 
 | 	c2_port->c2dev = c2dev; | 
 | 	c2_port->msg_enable = netif_msg_init(debug, default_msg); | 
 | 	c2_port->tx_ring.count = C2_NUM_TX_DESC; | 
 | 	c2_port->rx_ring.count = C2_NUM_RX_DESC; | 
 |  | 
 | 	spin_lock_init(&c2_port->tx_lock); | 
 |  | 
 | 	/* Copy our 48-bit ethernet hardware address */ | 
 | 	memcpy_fromio(netdev->dev_addr, mmio_addr + C2_REGS_ENADDR, 6); | 
 |  | 
 | 	/* Validate the MAC address */ | 
 | 	if (!is_valid_ether_addr(netdev->dev_addr)) { | 
 | 		pr_debug("Invalid MAC Address\n"); | 
 | 		c2_print_macaddr(netdev); | 
 | 		free_netdev(netdev); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	c2dev->netdev = netdev; | 
 |  | 
 | 	return netdev; | 
 | } | 
 |  | 
 | static int __devinit c2_probe(struct pci_dev *pcidev, | 
 | 			      const struct pci_device_id *ent) | 
 | { | 
 | 	int ret = 0, i; | 
 | 	unsigned long reg0_start, reg0_flags, reg0_len; | 
 | 	unsigned long reg2_start, reg2_flags, reg2_len; | 
 | 	unsigned long reg4_start, reg4_flags, reg4_len; | 
 | 	unsigned kva_map_size; | 
 | 	struct net_device *netdev = NULL; | 
 | 	struct c2_dev *c2dev = NULL; | 
 | 	void __iomem *mmio_regs = NULL; | 
 |  | 
 | 	printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n", | 
 | 		DRV_VERSION); | 
 |  | 
 | 	/* Enable PCI device */ | 
 | 	ret = pci_enable_device(pcidev); | 
 | 	if (ret) { | 
 | 		printk(KERN_ERR PFX "%s: Unable to enable PCI device\n", | 
 | 			pci_name(pcidev)); | 
 | 		goto bail0; | 
 | 	} | 
 |  | 
 | 	reg0_start = pci_resource_start(pcidev, BAR_0); | 
 | 	reg0_len = pci_resource_len(pcidev, BAR_0); | 
 | 	reg0_flags = pci_resource_flags(pcidev, BAR_0); | 
 |  | 
 | 	reg2_start = pci_resource_start(pcidev, BAR_2); | 
 | 	reg2_len = pci_resource_len(pcidev, BAR_2); | 
 | 	reg2_flags = pci_resource_flags(pcidev, BAR_2); | 
 |  | 
 | 	reg4_start = pci_resource_start(pcidev, BAR_4); | 
 | 	reg4_len = pci_resource_len(pcidev, BAR_4); | 
 | 	reg4_flags = pci_resource_flags(pcidev, BAR_4); | 
 |  | 
 | 	pr_debug("BAR0 size = 0x%lX bytes\n", reg0_len); | 
 | 	pr_debug("BAR2 size = 0x%lX bytes\n", reg2_len); | 
 | 	pr_debug("BAR4 size = 0x%lX bytes\n", reg4_len); | 
 |  | 
 | 	/* Make sure PCI base addr are MMIO */ | 
 | 	if (!(reg0_flags & IORESOURCE_MEM) || | 
 | 	    !(reg2_flags & IORESOURCE_MEM) || !(reg4_flags & IORESOURCE_MEM)) { | 
 | 		printk(KERN_ERR PFX "PCI regions not an MMIO resource\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto bail1; | 
 | 	} | 
 |  | 
 | 	/* Check for weird/broken PCI region reporting */ | 
 | 	if ((reg0_len < C2_REG0_SIZE) || | 
 | 	    (reg2_len < C2_REG2_SIZE) || (reg4_len < C2_REG4_SIZE)) { | 
 | 		printk(KERN_ERR PFX "Invalid PCI region sizes\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto bail1; | 
 | 	} | 
 |  | 
 | 	/* Reserve PCI I/O and memory resources */ | 
 | 	ret = pci_request_regions(pcidev, DRV_NAME); | 
 | 	if (ret) { | 
 | 		printk(KERN_ERR PFX "%s: Unable to request regions\n", | 
 | 			pci_name(pcidev)); | 
 | 		goto bail1; | 
 | 	} | 
 |  | 
 | 	if ((sizeof(dma_addr_t) > 4)) { | 
 | 		ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(64)); | 
 | 		if (ret < 0) { | 
 | 			printk(KERN_ERR PFX "64b DMA configuration failed\n"); | 
 | 			goto bail2; | 
 | 		} | 
 | 	} else { | 
 | 		ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32)); | 
 | 		if (ret < 0) { | 
 | 			printk(KERN_ERR PFX "32b DMA configuration failed\n"); | 
 | 			goto bail2; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Enables bus-mastering on the device */ | 
 | 	pci_set_master(pcidev); | 
 |  | 
 | 	/* Remap the adapter PCI registers in BAR4 */ | 
 | 	mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, | 
 | 				    sizeof(struct c2_adapter_pci_regs)); | 
 | 	if (!mmio_regs) { | 
 | 		printk(KERN_ERR PFX | 
 | 			"Unable to remap adapter PCI registers in BAR4\n"); | 
 | 		ret = -EIO; | 
 | 		goto bail2; | 
 | 	} | 
 |  | 
 | 	/* Validate PCI regs magic */ | 
 | 	for (i = 0; i < sizeof(c2_magic); i++) { | 
 | 		if (c2_magic[i] != readb(mmio_regs + C2_REGS_MAGIC + i)) { | 
 | 			printk(KERN_ERR PFX "Downlevel Firmware boot loader " | 
 | 				"[%d/%Zd: got 0x%x, exp 0x%x]. Use the cc_flash " | 
 | 			       "utility to update your boot loader\n", | 
 | 				i + 1, sizeof(c2_magic), | 
 | 				readb(mmio_regs + C2_REGS_MAGIC + i), | 
 | 				c2_magic[i]); | 
 | 			printk(KERN_ERR PFX "Adapter not claimed\n"); | 
 | 			iounmap(mmio_regs); | 
 | 			ret = -EIO; | 
 | 			goto bail2; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Validate the adapter version */ | 
 | 	if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) { | 
 | 		printk(KERN_ERR PFX "Version mismatch " | 
 | 			"[fw=%u, c2=%u], Adapter not claimed\n", | 
 | 			be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)), | 
 | 			C2_VERSION); | 
 | 		ret = -EINVAL; | 
 | 		iounmap(mmio_regs); | 
 | 		goto bail2; | 
 | 	} | 
 |  | 
 | 	/* Validate the adapter IVN */ | 
 | 	if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) { | 
 | 		printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using " | 
 | 		       "the OpenIB device support kit. " | 
 | 		       "[fw=0x%x, c2=0x%x], Adapter not claimed\n", | 
 | 		       be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)), | 
 | 		       C2_IVN); | 
 | 		ret = -EINVAL; | 
 | 		iounmap(mmio_regs); | 
 | 		goto bail2; | 
 | 	} | 
 |  | 
 | 	/* Allocate hardware structure */ | 
 | 	c2dev = (struct c2_dev *) ib_alloc_device(sizeof(*c2dev)); | 
 | 	if (!c2dev) { | 
 | 		printk(KERN_ERR PFX "%s: Unable to alloc hardware struct\n", | 
 | 			pci_name(pcidev)); | 
 | 		ret = -ENOMEM; | 
 | 		iounmap(mmio_regs); | 
 | 		goto bail2; | 
 | 	} | 
 |  | 
 | 	memset(c2dev, 0, sizeof(*c2dev)); | 
 | 	spin_lock_init(&c2dev->lock); | 
 | 	c2dev->pcidev = pcidev; | 
 | 	c2dev->cur_tx = 0; | 
 |  | 
 | 	/* Get the last RX index */ | 
 | 	c2dev->cur_rx = | 
 | 	    (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_HRX_CUR)) - | 
 | 	     0xffffc000) / sizeof(struct c2_rxp_desc); | 
 |  | 
 | 	/* Request an interrupt line for the driver */ | 
 | 	ret = request_irq(pcidev->irq, c2_interrupt, IRQF_SHARED, DRV_NAME, c2dev); | 
 | 	if (ret) { | 
 | 		printk(KERN_ERR PFX "%s: requested IRQ %u is busy\n", | 
 | 			pci_name(pcidev), pcidev->irq); | 
 | 		iounmap(mmio_regs); | 
 | 		goto bail3; | 
 | 	} | 
 |  | 
 | 	/* Set driver specific data */ | 
 | 	pci_set_drvdata(pcidev, c2dev); | 
 |  | 
 | 	/* Initialize network device */ | 
 | 	if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) { | 
 | 		iounmap(mmio_regs); | 
 | 		goto bail4; | 
 | 	} | 
 |  | 
 | 	/* Save off the actual size prior to unmapping mmio_regs */ | 
 | 	kva_map_size = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_PCI_WINSIZE)); | 
 |  | 
 | 	/* Unmap the adapter PCI registers in BAR4 */ | 
 | 	iounmap(mmio_regs); | 
 |  | 
 | 	/* Register network device */ | 
 | 	ret = register_netdev(netdev); | 
 | 	if (ret) { | 
 | 		printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n", | 
 | 			ret); | 
 | 		goto bail5; | 
 | 	} | 
 |  | 
 | 	/* Disable network packets */ | 
 | 	netif_stop_queue(netdev); | 
 |  | 
 | 	/* Remap the adapter HRXDQ PA space to kernel VA space */ | 
 | 	c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET, | 
 | 					       C2_RXP_HRXDQ_SIZE); | 
 | 	if (!c2dev->mmio_rxp_ring) { | 
 | 		printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n"); | 
 | 		ret = -EIO; | 
 | 		goto bail6; | 
 | 	} | 
 |  | 
 | 	/* Remap the adapter HTXDQ PA space to kernel VA space */ | 
 | 	c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET, | 
 | 					       C2_TXP_HTXDQ_SIZE); | 
 | 	if (!c2dev->mmio_txp_ring) { | 
 | 		printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n"); | 
 | 		ret = -EIO; | 
 | 		goto bail7; | 
 | 	} | 
 |  | 
 | 	/* Save off the current RX index in the last 4 bytes of the TXP Ring */ | 
 | 	C2_SET_CUR_RX(c2dev, c2dev->cur_rx); | 
 |  | 
 | 	/* Remap the PCI registers in adapter BAR0 to kernel VA space */ | 
 | 	c2dev->regs = ioremap_nocache(reg0_start, reg0_len); | 
 | 	if (!c2dev->regs) { | 
 | 		printk(KERN_ERR PFX "Unable to remap BAR0\n"); | 
 | 		ret = -EIO; | 
 | 		goto bail8; | 
 | 	} | 
 |  | 
 | 	/* Remap the PCI registers in adapter BAR4 to kernel VA space */ | 
 | 	c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET; | 
 | 	c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, | 
 | 				     kva_map_size); | 
 | 	if (!c2dev->kva) { | 
 | 		printk(KERN_ERR PFX "Unable to remap BAR4\n"); | 
 | 		ret = -EIO; | 
 | 		goto bail9; | 
 | 	} | 
 |  | 
 | 	/* Print out the MAC address */ | 
 | 	c2_print_macaddr(netdev); | 
 |  | 
 | 	ret = c2_rnic_init(c2dev); | 
 | 	if (ret) { | 
 | 		printk(KERN_ERR PFX "c2_rnic_init failed: %d\n", ret); | 
 | 		goto bail10; | 
 | 	} | 
 |  | 
 | 	if (c2_register_device(c2dev)) | 
 | 		goto bail10; | 
 |  | 
 | 	return 0; | 
 |  | 
 |  bail10: | 
 | 	iounmap(c2dev->kva); | 
 |  | 
 |  bail9: | 
 | 	iounmap(c2dev->regs); | 
 |  | 
 |  bail8: | 
 | 	iounmap(c2dev->mmio_txp_ring); | 
 |  | 
 |  bail7: | 
 | 	iounmap(c2dev->mmio_rxp_ring); | 
 |  | 
 |  bail6: | 
 | 	unregister_netdev(netdev); | 
 |  | 
 |  bail5: | 
 | 	free_netdev(netdev); | 
 |  | 
 |  bail4: | 
 | 	free_irq(pcidev->irq, c2dev); | 
 |  | 
 |  bail3: | 
 | 	ib_dealloc_device(&c2dev->ibdev); | 
 |  | 
 |  bail2: | 
 | 	pci_release_regions(pcidev); | 
 |  | 
 |  bail1: | 
 | 	pci_disable_device(pcidev); | 
 |  | 
 |  bail0: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __devexit c2_remove(struct pci_dev *pcidev) | 
 | { | 
 | 	struct c2_dev *c2dev = pci_get_drvdata(pcidev); | 
 | 	struct net_device *netdev = c2dev->netdev; | 
 |  | 
 | 	/* Unregister with OpenIB */ | 
 | 	c2_unregister_device(c2dev); | 
 |  | 
 | 	/* Clean up the RNIC resources */ | 
 | 	c2_rnic_term(c2dev); | 
 |  | 
 | 	/* Remove network device from the kernel */ | 
 | 	unregister_netdev(netdev); | 
 |  | 
 | 	/* Free network device */ | 
 | 	free_netdev(netdev); | 
 |  | 
 | 	/* Free the interrupt line */ | 
 | 	free_irq(pcidev->irq, c2dev); | 
 |  | 
 | 	/* missing: Turn LEDs off here */ | 
 |  | 
 | 	/* Unmap adapter PA space */ | 
 | 	iounmap(c2dev->kva); | 
 | 	iounmap(c2dev->regs); | 
 | 	iounmap(c2dev->mmio_txp_ring); | 
 | 	iounmap(c2dev->mmio_rxp_ring); | 
 |  | 
 | 	/* Free the hardware structure */ | 
 | 	ib_dealloc_device(&c2dev->ibdev); | 
 |  | 
 | 	/* Release reserved PCI I/O and memory resources */ | 
 | 	pci_release_regions(pcidev); | 
 |  | 
 | 	/* Disable PCI device */ | 
 | 	pci_disable_device(pcidev); | 
 |  | 
 | 	/* Clear driver specific data */ | 
 | 	pci_set_drvdata(pcidev, NULL); | 
 | } | 
 |  | 
 | static struct pci_driver c2_pci_driver = { | 
 | 	.name = DRV_NAME, | 
 | 	.id_table = c2_pci_table, | 
 | 	.probe = c2_probe, | 
 | 	.remove = __devexit_p(c2_remove), | 
 | }; | 
 |  | 
 | static int __init c2_init_module(void) | 
 | { | 
 | 	return pci_register_driver(&c2_pci_driver); | 
 | } | 
 |  | 
 | static void __exit c2_exit_module(void) | 
 | { | 
 | 	pci_unregister_driver(&c2_pci_driver); | 
 | } | 
 |  | 
 | module_init(c2_init_module); | 
 | module_exit(c2_exit_module); |