|  | /* | 
|  | * LP5521 LED chip driver. | 
|  | * | 
|  | * Copyright (C) 2010 Nokia Corporation | 
|  | * | 
|  | * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/leds-lp5521.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #define LP5521_PROGRAM_LENGTH		32	/* in bytes */ | 
|  |  | 
|  | #define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */ | 
|  | #define LP5521_MAX_ENGINES		3	/* Maximum number of engines */ | 
|  |  | 
|  | #define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */ | 
|  | #define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */ | 
|  |  | 
|  | #define LP5521_CMD_LOAD			0x15	/* 00010101 */ | 
|  | #define LP5521_CMD_RUN			0x2a	/* 00101010 */ | 
|  | #define LP5521_CMD_DIRECT		0x3f	/* 00111111 */ | 
|  | #define LP5521_CMD_DISABLED		0x00	/* 00000000 */ | 
|  |  | 
|  | /* Registers */ | 
|  | #define LP5521_REG_ENABLE		0x00 | 
|  | #define LP5521_REG_OP_MODE		0x01 | 
|  | #define LP5521_REG_R_PWM		0x02 | 
|  | #define LP5521_REG_G_PWM		0x03 | 
|  | #define LP5521_REG_B_PWM		0x04 | 
|  | #define LP5521_REG_R_CURRENT		0x05 | 
|  | #define LP5521_REG_G_CURRENT		0x06 | 
|  | #define LP5521_REG_B_CURRENT		0x07 | 
|  | #define LP5521_REG_CONFIG		0x08 | 
|  | #define LP5521_REG_R_CHANNEL_PC		0x09 | 
|  | #define LP5521_REG_G_CHANNEL_PC		0x0A | 
|  | #define LP5521_REG_B_CHANNEL_PC		0x0B | 
|  | #define LP5521_REG_STATUS		0x0C | 
|  | #define LP5521_REG_RESET		0x0D | 
|  | #define LP5521_REG_GPO			0x0E | 
|  | #define LP5521_REG_R_PROG_MEM		0x10 | 
|  | #define LP5521_REG_G_PROG_MEM		0x30 | 
|  | #define LP5521_REG_B_PROG_MEM		0x50 | 
|  |  | 
|  | #define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM | 
|  | #define LP5521_PROG_MEM_SIZE		0x20 | 
|  |  | 
|  | /* Base register to set LED current */ | 
|  | #define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT | 
|  |  | 
|  | /* Base register to set the brightness */ | 
|  | #define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM | 
|  |  | 
|  | /* Bits in ENABLE register */ | 
|  | #define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */ | 
|  | #define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */ | 
|  | #define LP5521_EXEC_RUN			0x2A | 
|  |  | 
|  | /* Bits in CONFIG register */ | 
|  | #define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */ | 
|  | #define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */ | 
|  | #define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */ | 
|  | #define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */ | 
|  | #define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */ | 
|  | #define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */ | 
|  | #define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */ | 
|  | #define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */ | 
|  | #define LP5521_CLK_INT			1	/* Internal clock */ | 
|  | #define LP5521_CLK_AUTO			2	/* Automatic clock selection */ | 
|  |  | 
|  | /* Status */ | 
|  | #define LP5521_EXT_CLK_USED		0x08 | 
|  |  | 
|  | struct lp5521_engine { | 
|  | const struct attribute_group *attributes; | 
|  | int		id; | 
|  | u8		mode; | 
|  | u8		prog_page; | 
|  | u8		engine_mask; | 
|  | }; | 
|  |  | 
|  | struct lp5521_led { | 
|  | int			id; | 
|  | u8			chan_nr; | 
|  | u8			led_current; | 
|  | u8			max_current; | 
|  | struct led_classdev	cdev; | 
|  | struct work_struct	brightness_work; | 
|  | u8			brightness; | 
|  | }; | 
|  |  | 
|  | struct lp5521_chip { | 
|  | struct lp5521_platform_data *pdata; | 
|  | struct mutex		lock; /* Serialize control */ | 
|  | struct i2c_client	*client; | 
|  | struct lp5521_engine	engines[LP5521_MAX_ENGINES]; | 
|  | struct lp5521_led	leds[LP5521_MAX_LEDS]; | 
|  | u8			num_channels; | 
|  | u8			num_leds; | 
|  | }; | 
|  |  | 
|  | static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) | 
|  | { | 
|  | return container_of(cdev, struct lp5521_led, cdev); | 
|  | } | 
|  |  | 
|  | static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) | 
|  | { | 
|  | return container_of(engine, struct lp5521_chip, | 
|  | engines[engine->id - 1]); | 
|  | } | 
|  |  | 
|  | static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) | 
|  | { | 
|  | return container_of(led, struct lp5521_chip, | 
|  | leds[led->id]); | 
|  | } | 
|  |  | 
|  | static void lp5521_led_brightness_work(struct work_struct *work); | 
|  |  | 
|  | static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) | 
|  | { | 
|  | return i2c_smbus_write_byte_data(client, reg, value); | 
|  | } | 
|  |  | 
|  | static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) | 
|  | { | 
|  | s32 ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, reg); | 
|  | if (ret < 0) | 
|  | return -EIO; | 
|  |  | 
|  | *buf = ret; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) | 
|  | { | 
|  | struct lp5521_chip *chip = engine_to_lp5521(engine); | 
|  | struct i2c_client *client = chip->client; | 
|  | int ret; | 
|  | u8 engine_state; | 
|  |  | 
|  | /* Only transition between RUN and DIRECT mode are handled here */ | 
|  | if (mode == LP5521_CMD_LOAD) | 
|  | return 0; | 
|  |  | 
|  | if (mode == LP5521_CMD_DISABLED) | 
|  | mode = LP5521_CMD_DIRECT; | 
|  |  | 
|  | ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); | 
|  |  | 
|  | /* set mode only for this engine */ | 
|  | engine_state &= ~(engine->engine_mask); | 
|  | mode &= engine->engine_mask; | 
|  | engine_state |= mode; | 
|  | ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) | 
|  | { | 
|  | struct lp5521_chip *chip = engine_to_lp5521(eng); | 
|  | struct i2c_client *client = chip->client; | 
|  | int ret; | 
|  | int addr; | 
|  | u8 mode; | 
|  |  | 
|  | /* move current engine to direct mode and remember the state */ | 
|  | ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); | 
|  | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | usleep_range(1000, 2000); | 
|  | ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); | 
|  |  | 
|  | /* For loading, all the engines to load mode */ | 
|  | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | 
|  | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | usleep_range(1000, 2000); | 
|  | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | 
|  | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; | 
|  | i2c_smbus_write_i2c_block_data(client, | 
|  | addr, | 
|  | LP5521_PROG_MEM_SIZE, | 
|  | pattern); | 
|  |  | 
|  | ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) | 
|  | { | 
|  | return lp5521_write(chip->client, | 
|  | LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, | 
|  | curr); | 
|  | } | 
|  |  | 
|  | static void lp5521_init_engine(struct lp5521_chip *chip, | 
|  | const struct attribute_group *attr_group) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | 
|  | chip->engines[i].id = i + 1; | 
|  | chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); | 
|  | chip->engines[i].prog_page = i; | 
|  | chip->engines[i].attributes = &attr_group[i]; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int lp5521_configure(struct i2c_client *client, | 
|  | const struct attribute_group *attr_group) | 
|  | { | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | int ret; | 
|  |  | 
|  | lp5521_init_engine(chip, attr_group); | 
|  |  | 
|  | /* Set all PWMs to direct control mode */ | 
|  | ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); | 
|  |  | 
|  | /* Enable auto-powersave, set charge pump to auto, red to battery */ | 
|  | ret |= lp5521_write(client, LP5521_REG_CONFIG, | 
|  | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); | 
|  |  | 
|  | /* Initialize all channels PWM to zero -> leds off */ | 
|  | ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); | 
|  | ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); | 
|  | ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); | 
|  |  | 
|  | /* Set engines are set to run state when OP_MODE enables engines */ | 
|  | ret |= lp5521_write(client, LP5521_REG_ENABLE, | 
|  | LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | | 
|  | LP5521_EXEC_RUN); | 
|  | /* enable takes 500us. 1 - 2 ms leaves some margin */ | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) | 
|  | { | 
|  | int ret; | 
|  | u8 status; | 
|  |  | 
|  | ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Check that ext clock is really in use if requested */ | 
|  | if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) | 
|  | if  ((status & LP5521_EXT_CLK_USED) == 0) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void lp5521_set_brightness(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct lp5521_led *led = cdev_to_led(cdev); | 
|  | led->brightness = (u8)brightness; | 
|  | schedule_work(&led->brightness_work); | 
|  | } | 
|  |  | 
|  | static void lp5521_led_brightness_work(struct work_struct *work) | 
|  | { | 
|  | struct lp5521_led *led = container_of(work, | 
|  | struct lp5521_led, | 
|  | brightness_work); | 
|  | struct lp5521_chip *chip = led_to_lp5521(led); | 
|  | struct i2c_client *client = chip->client; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, | 
|  | led->brightness); | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  |  | 
|  | /* Detect the chip by setting its ENABLE register and reading it back. */ | 
|  | static int lp5521_detect(struct i2c_client *client) | 
|  | { | 
|  | int ret; | 
|  | u8 buf; | 
|  |  | 
|  | ret = lp5521_write(client, LP5521_REG_ENABLE, | 
|  | LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); | 
|  | if (ret) | 
|  | return ret; | 
|  | /* enable takes 500us. 1 - 2 ms leaves some margin */ | 
|  | usleep_range(1000, 2000); | 
|  | ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); | 
|  | if (ret) | 
|  | return ret; | 
|  | if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Set engine mode and create appropriate sysfs attributes, if required. */ | 
|  | static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) | 
|  | { | 
|  | struct lp5521_chip *chip = engine_to_lp5521(engine); | 
|  | struct i2c_client *client = chip->client; | 
|  | struct device *dev = &client->dev; | 
|  | int ret = 0; | 
|  |  | 
|  | /* if in that mode already do nothing, except for run */ | 
|  | if (mode == engine->mode && mode != LP5521_CMD_RUN) | 
|  | return 0; | 
|  |  | 
|  | if (mode == LP5521_CMD_RUN) { | 
|  | ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); | 
|  | } else if (mode == LP5521_CMD_LOAD) { | 
|  | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
|  | lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); | 
|  |  | 
|  | ret = sysfs_create_group(&dev->kobj, engine->attributes); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else if (mode == LP5521_CMD_DISABLED) { | 
|  | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
|  | } | 
|  |  | 
|  | /* remove load attribute from sysfs if not in load mode */ | 
|  | if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD) | 
|  | sysfs_remove_group(&dev->kobj, engine->attributes); | 
|  |  | 
|  | engine->mode = mode; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5521_do_store_load(struct lp5521_engine *engine, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp5521_chip *chip = engine_to_lp5521(engine); | 
|  | struct i2c_client *client = chip->client; | 
|  | int  ret, nrchars, offset = 0, i = 0; | 
|  | char c[3]; | 
|  | unsigned cmd; | 
|  | u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | 
|  |  | 
|  | while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { | 
|  | /* separate sscanfs because length is working only for %s */ | 
|  | ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); | 
|  | ret = sscanf(c, "%2x", &cmd); | 
|  | if (ret != 1) | 
|  | goto fail; | 
|  | pattern[i] = (u8)cmd; | 
|  |  | 
|  | offset += nrchars; | 
|  | i++; | 
|  | } | 
|  |  | 
|  | /* Each instruction is 16bit long. Check that length is even */ | 
|  | if (i % 2) | 
|  | goto fail; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | ret = lp5521_load_program(engine, pattern); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "failed loading pattern\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | fail: | 
|  | dev_err(&client->dev, "wrong pattern format\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static ssize_t store_engine_load(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len, int nr) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); | 
|  | } | 
|  |  | 
|  | #define store_load(nr)							\ | 
|  | static ssize_t store_engine##nr##_load(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | const char *buf, size_t len)	\ | 
|  | {									\ | 
|  | return store_engine_load(dev, attr, buf, len, nr);		\ | 
|  | } | 
|  | store_load(1) | 
|  | store_load(2) | 
|  | store_load(3) | 
|  |  | 
|  | static ssize_t show_engine_mode(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf, int nr) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | switch (chip->engines[nr - 1].mode) { | 
|  | case LP5521_CMD_RUN: | 
|  | return sprintf(buf, "run\n"); | 
|  | case LP5521_CMD_LOAD: | 
|  | return sprintf(buf, "load\n"); | 
|  | case LP5521_CMD_DISABLED: | 
|  | return sprintf(buf, "disabled\n"); | 
|  | default: | 
|  | return sprintf(buf, "disabled\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | #define show_mode(nr)							\ | 
|  | static ssize_t show_engine##nr##_mode(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | char *buf)				\ | 
|  | {									\ | 
|  | return show_engine_mode(dev, attr, buf, nr);			\ | 
|  | } | 
|  | show_mode(1) | 
|  | show_mode(2) | 
|  | show_mode(3) | 
|  |  | 
|  | static ssize_t store_engine_mode(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len, int nr) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | struct lp5521_engine *engine = &chip->engines[nr - 1]; | 
|  | mutex_lock(&chip->lock); | 
|  |  | 
|  | if (!strncmp(buf, "run", 3)) | 
|  | lp5521_set_mode(engine, LP5521_CMD_RUN); | 
|  | else if (!strncmp(buf, "load", 4)) | 
|  | lp5521_set_mode(engine, LP5521_CMD_LOAD); | 
|  | else if (!strncmp(buf, "disabled", 8)) | 
|  | lp5521_set_mode(engine, LP5521_CMD_DISABLED); | 
|  |  | 
|  | mutex_unlock(&chip->lock); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | #define store_mode(nr)							\ | 
|  | static ssize_t store_engine##nr##_mode(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | const char *buf, size_t len)	\ | 
|  | {									\ | 
|  | return store_engine_mode(dev, attr, buf, len, nr);		\ | 
|  | } | 
|  | store_mode(1) | 
|  | store_mode(2) | 
|  | store_mode(3) | 
|  |  | 
|  | static ssize_t show_max_current(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", led->max_current); | 
|  | } | 
|  |  | 
|  | static ssize_t show_current(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", led->led_current); | 
|  | } | 
|  |  | 
|  | static ssize_t store_current(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  | struct lp5521_chip *chip = led_to_lp5521(led); | 
|  | ssize_t ret; | 
|  | unsigned long curr; | 
|  |  | 
|  | if (strict_strtoul(buf, 0, &curr)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (curr > led->max_current) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | ret = lp5521_set_led_current(chip, led->id, curr); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | led->led_current = (u8)curr; | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t lp5521_selftest(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | ret = lp5521_run_selftest(chip, buf); | 
|  | mutex_unlock(&chip->lock); | 
|  | return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); | 
|  | } | 
|  |  | 
|  | /* led class device attributes */ | 
|  | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); | 
|  | static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); | 
|  |  | 
|  | static struct attribute *lp5521_led_attributes[] = { | 
|  | &dev_attr_led_current.attr, | 
|  | &dev_attr_max_current.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group lp5521_led_attribute_group = { | 
|  | .attrs = lp5521_led_attributes | 
|  | }; | 
|  |  | 
|  | /* device attributes */ | 
|  | static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, | 
|  | show_engine1_mode, store_engine1_mode); | 
|  | static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, | 
|  | show_engine2_mode, store_engine2_mode); | 
|  | static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, | 
|  | show_engine3_mode, store_engine3_mode); | 
|  | static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); | 
|  | static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); | 
|  | static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); | 
|  | static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); | 
|  |  | 
|  | static struct attribute *lp5521_attributes[] = { | 
|  | &dev_attr_engine1_mode.attr, | 
|  | &dev_attr_engine2_mode.attr, | 
|  | &dev_attr_engine3_mode.attr, | 
|  | &dev_attr_selftest.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute *lp5521_engine1_attributes[] = { | 
|  | &dev_attr_engine1_load.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute *lp5521_engine2_attributes[] = { | 
|  | &dev_attr_engine2_load.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute *lp5521_engine3_attributes[] = { | 
|  | &dev_attr_engine3_load.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lp5521_group = { | 
|  | .attrs = lp5521_attributes, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lp5521_engine_group[] = { | 
|  | {.attrs = lp5521_engine1_attributes }, | 
|  | {.attrs = lp5521_engine2_attributes }, | 
|  | {.attrs = lp5521_engine3_attributes }, | 
|  | }; | 
|  |  | 
|  | static int lp5521_register_sysfs(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | return sysfs_create_group(&dev->kobj, &lp5521_group); | 
|  | } | 
|  |  | 
|  | static void lp5521_unregister_sysfs(struct i2c_client *client) | 
|  | { | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | struct device *dev = &client->dev; | 
|  | int i; | 
|  |  | 
|  | sysfs_remove_group(&dev->kobj, &lp5521_group); | 
|  |  | 
|  | for (i = 0; i <  ARRAY_SIZE(chip->engines); i++) { | 
|  | if (chip->engines[i].mode == LP5521_CMD_LOAD) | 
|  | sysfs_remove_group(&dev->kobj, | 
|  | chip->engines[i].attributes); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < chip->num_leds; i++) | 
|  | sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, | 
|  | &lp5521_led_attribute_group); | 
|  | } | 
|  |  | 
|  | static int __init lp5521_init_led(struct lp5521_led *led, | 
|  | struct i2c_client *client, | 
|  | int chan, struct lp5521_platform_data *pdata) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | char name[32]; | 
|  | int res; | 
|  |  | 
|  | if (chan >= LP5521_MAX_LEDS) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pdata->led_config[chan].led_current == 0) | 
|  | return 0; | 
|  |  | 
|  | led->led_current = pdata->led_config[chan].led_current; | 
|  | led->max_current = pdata->led_config[chan].max_current; | 
|  | led->chan_nr = pdata->led_config[chan].chan_nr; | 
|  |  | 
|  | if (led->chan_nr >= LP5521_MAX_LEDS) { | 
|  | dev_err(dev, "Use channel numbers between 0 and %d\n", | 
|  | LP5521_MAX_LEDS - 1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | snprintf(name, sizeof(name), "%s:channel%d", client->name, chan); | 
|  | led->cdev.brightness_set = lp5521_set_brightness; | 
|  | led->cdev.name = name; | 
|  | res = led_classdev_register(dev, &led->cdev); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "couldn't register led on channel %d\n", chan); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | res = sysfs_create_group(&led->cdev.dev->kobj, | 
|  | &lp5521_led_attribute_group); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "couldn't register current attribute\n"); | 
|  | led_classdev_unregister(&led->cdev); | 
|  | return res; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp5521_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct lp5521_chip		*chip; | 
|  | struct lp5521_platform_data	*pdata; | 
|  | int ret, i, led; | 
|  |  | 
|  | chip = kzalloc(sizeof(*chip), GFP_KERNEL); | 
|  | if (!chip) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(client, chip); | 
|  | chip->client = client; | 
|  |  | 
|  | pdata = client->dev.platform_data; | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&client->dev, "no platform data\n"); | 
|  | ret = -EINVAL; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | mutex_init(&chip->lock); | 
|  |  | 
|  | chip->pdata   = pdata; | 
|  |  | 
|  | if (pdata->setup_resources) { | 
|  | ret = pdata->setup_resources(); | 
|  | if (ret < 0) | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | if (pdata->enable) { | 
|  | pdata->enable(0); | 
|  | usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | 
|  | pdata->enable(1); | 
|  | usleep_range(1000, 2000); /* 500us abs min. */ | 
|  | } | 
|  |  | 
|  | lp5521_write(client, LP5521_REG_RESET, 0xff); | 
|  | usleep_range(10000, 20000); /* | 
|  | * Exact value is not available. 10 - 20ms | 
|  | * appears to be enough for reset. | 
|  | */ | 
|  | ret = lp5521_detect(client); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "Chip not found\n"); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | dev_info(&client->dev, "%s programmable led chip found\n", id->name); | 
|  |  | 
|  | ret = lp5521_configure(client, lp5521_engine_group); | 
|  | if (ret < 0) { | 
|  | dev_err(&client->dev, "error configuring chip\n"); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | /* Initialize leds */ | 
|  | chip->num_channels = pdata->num_channels; | 
|  | chip->num_leds = 0; | 
|  | led = 0; | 
|  | for (i = 0; i < pdata->num_channels; i++) { | 
|  | /* Do not initialize channels that are not connected */ | 
|  | if (pdata->led_config[i].led_current == 0) | 
|  | continue; | 
|  |  | 
|  | ret = lp5521_init_led(&chip->leds[led], client, i, pdata); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "error initializing leds\n"); | 
|  | goto fail3; | 
|  | } | 
|  | chip->num_leds++; | 
|  |  | 
|  | chip->leds[led].id = led; | 
|  | /* Set initial LED current */ | 
|  | lp5521_set_led_current(chip, led, | 
|  | chip->leds[led].led_current); | 
|  |  | 
|  | INIT_WORK(&(chip->leds[led].brightness_work), | 
|  | lp5521_led_brightness_work); | 
|  |  | 
|  | led++; | 
|  | } | 
|  |  | 
|  | ret = lp5521_register_sysfs(client); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "registering sysfs failed\n"); | 
|  | goto fail3; | 
|  | } | 
|  | return ret; | 
|  | fail3: | 
|  | for (i = 0; i < chip->num_leds; i++) { | 
|  | led_classdev_unregister(&chip->leds[i].cdev); | 
|  | cancel_work_sync(&chip->leds[i].brightness_work); | 
|  | } | 
|  | fail2: | 
|  | if (pdata->enable) | 
|  | pdata->enable(0); | 
|  | if (pdata->release_resources) | 
|  | pdata->release_resources(); | 
|  | fail1: | 
|  | kfree(chip); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5521_remove(struct i2c_client *client) | 
|  | { | 
|  | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | int i; | 
|  |  | 
|  | lp5521_unregister_sysfs(client); | 
|  |  | 
|  | for (i = 0; i < chip->num_leds; i++) { | 
|  | led_classdev_unregister(&chip->leds[i].cdev); | 
|  | cancel_work_sync(&chip->leds[i].brightness_work); | 
|  | } | 
|  |  | 
|  | if (chip->pdata->enable) | 
|  | chip->pdata->enable(0); | 
|  | if (chip->pdata->release_resources) | 
|  | chip->pdata->release_resources(); | 
|  | kfree(chip); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id lp5521_id[] = { | 
|  | { "lp5521", 0 }, /* Three channel chip */ | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, lp5521_id); | 
|  |  | 
|  | static struct i2c_driver lp5521_driver = { | 
|  | .driver = { | 
|  | .name	= "lp5521", | 
|  | }, | 
|  | .probe		= lp5521_probe, | 
|  | .remove		= lp5521_remove, | 
|  | .id_table	= lp5521_id, | 
|  | }; | 
|  |  | 
|  | static int __init lp5521_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_add_driver(&lp5521_driver); | 
|  |  | 
|  | if (ret < 0) | 
|  | printk(KERN_ALERT "Adding lp5521 driver failed\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit lp5521_exit(void) | 
|  | { | 
|  | i2c_del_driver(&lp5521_driver); | 
|  | } | 
|  |  | 
|  | module_init(lp5521_init); | 
|  | module_exit(lp5521_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | 
|  | MODULE_DESCRIPTION("LP5521 LED engine"); | 
|  | MODULE_LICENSE("GPL v2"); |