| /* | 
 |  * ACPI PCI HotPlug glue functions to ACPI CA subsystem | 
 |  * | 
 |  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com) | 
 |  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com) | 
 |  * Copyright (C) 2002,2003 NEC Corporation | 
 |  * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com) | 
 |  * Copyright (C) 2003-2005 Hewlett Packard | 
 |  * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com) | 
 |  * Copyright (C) 2005 Intel Corporation | 
 |  * | 
 |  * All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or (at | 
 |  * your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | 
 |  * NON INFRINGEMENT.  See the GNU General Public License for more | 
 |  * details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  * Send feedback to <kristen.c.accardi@intel.com> | 
 |  * | 
 |  */ | 
 |  | 
 | /* | 
 |  * Lifetime rules for pci_dev: | 
 |  *  - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() | 
 |  *    when the bridge is scanned and it loses a refcount when the bridge | 
 |  *    is removed. | 
 |  *  - When a P2P bridge is present, we elevate the refcount on the subordinate | 
 |  *    bus. It loses the refcount when the the driver unloads. | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/pci_hotplug.h> | 
 | #include <linux/pci-acpi.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include "../pci.h" | 
 | #include "acpiphp.h" | 
 |  | 
 | static LIST_HEAD(bridge_list); | 
 |  | 
 | #define MY_NAME "acpiphp_glue" | 
 |  | 
 | static void handle_hotplug_event_bridge (acpi_handle, u32, void *); | 
 | static void acpiphp_sanitize_bus(struct pci_bus *bus); | 
 | static void acpiphp_set_hpp_values(struct pci_bus *bus); | 
 | static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context); | 
 |  | 
 | /* callback routine to check for the existence of a pci dock device */ | 
 | static acpi_status | 
 | is_pci_dock_device(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	int *count = (int *)context; | 
 |  | 
 | 	if (is_dock_device(handle)) { | 
 | 		(*count)++; | 
 | 		return AE_CTRL_TERMINATE; | 
 | 	} else { | 
 | 		return AE_OK; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * the _DCK method can do funny things... and sometimes not | 
 |  * hah-hah funny. | 
 |  * | 
 |  * TBD - figure out a way to only call fixups for | 
 |  * systems that require them. | 
 |  */ | 
 | static int post_dock_fixups(struct notifier_block *nb, unsigned long val, | 
 | 	void *v) | 
 | { | 
 | 	struct acpiphp_func *func = container_of(nb, struct acpiphp_func, nb); | 
 | 	struct pci_bus *bus = func->slot->bridge->pci_bus; | 
 | 	u32 buses; | 
 |  | 
 | 	if (!bus->self) | 
 | 		return  NOTIFY_OK; | 
 |  | 
 | 	/* fixup bad _DCK function that rewrites | 
 | 	 * secondary bridge on slot | 
 | 	 */ | 
 | 	pci_read_config_dword(bus->self, | 
 | 			PCI_PRIMARY_BUS, | 
 | 			&buses); | 
 |  | 
 | 	if (((buses >> 8) & 0xff) != bus->secondary) { | 
 | 		buses = (buses & 0xff000000) | 
 | 			| ((unsigned int)(bus->primary)     <<  0) | 
 | 			| ((unsigned int)(bus->secondary)   <<  8) | 
 | 			| ((unsigned int)(bus->subordinate) << 16); | 
 | 		pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses); | 
 | 	} | 
 | 	return NOTIFY_OK; | 
 | } | 
 |  | 
 |  | 
 | static struct acpi_dock_ops acpiphp_dock_ops = { | 
 | 	.handler = handle_hotplug_event_func, | 
 | }; | 
 |  | 
 | /* callback routine to register each ACPI PCI slot object */ | 
 | static acpi_status | 
 | register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context; | 
 | 	struct acpiphp_slot *slot; | 
 | 	struct acpiphp_func *newfunc; | 
 | 	acpi_handle tmp; | 
 | 	acpi_status status = AE_OK; | 
 | 	unsigned long long adr, sun; | 
 | 	int device, function, retval; | 
 | 	struct pci_bus *pbus = bridge->pci_bus; | 
 | 	struct pci_dev *pdev; | 
 |  | 
 | 	if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) | 
 | 		return AE_OK; | 
 |  | 
 | 	acpi_evaluate_integer(handle, "_ADR", NULL, &adr); | 
 | 	device = (adr >> 16) & 0xffff; | 
 | 	function = adr & 0xffff; | 
 |  | 
 | 	newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL); | 
 | 	if (!newfunc) | 
 | 		return AE_NO_MEMORY; | 
 |  | 
 | 	INIT_LIST_HEAD(&newfunc->sibling); | 
 | 	newfunc->handle = handle; | 
 | 	newfunc->function = function; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) | 
 | 		newfunc->flags = FUNC_HAS_EJ0; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp))) | 
 | 		newfunc->flags |= FUNC_HAS_STA; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp))) | 
 | 		newfunc->flags |= FUNC_HAS_PS0; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp))) | 
 | 		newfunc->flags |= FUNC_HAS_PS3; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp))) | 
 | 		newfunc->flags |= FUNC_HAS_DCK; | 
 |  | 
 | 	status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		/* | 
 | 		 * use the count of the number of slots we've found | 
 | 		 * for the number of the slot | 
 | 		 */ | 
 | 		sun = bridge->nr_slots+1; | 
 | 	} | 
 |  | 
 | 	/* search for objects that share the same slot */ | 
 | 	for (slot = bridge->slots; slot; slot = slot->next) | 
 | 		if (slot->device == device) { | 
 | 			if (slot->sun != sun) | 
 | 				warn("sibling found, but _SUN doesn't match!\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 	if (!slot) { | 
 | 		slot = kzalloc(sizeof(struct acpiphp_slot), GFP_KERNEL); | 
 | 		if (!slot) { | 
 | 			kfree(newfunc); | 
 | 			return AE_NO_MEMORY; | 
 | 		} | 
 |  | 
 | 		slot->bridge = bridge; | 
 | 		slot->device = device; | 
 | 		slot->sun = sun; | 
 | 		INIT_LIST_HEAD(&slot->funcs); | 
 | 		mutex_init(&slot->crit_sect); | 
 |  | 
 | 		slot->next = bridge->slots; | 
 | 		bridge->slots = slot; | 
 |  | 
 | 		bridge->nr_slots++; | 
 |  | 
 | 		dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n", | 
 | 		    slot->sun, pci_domain_nr(pbus), pbus->number, device); | 
 | 		retval = acpiphp_register_hotplug_slot(slot); | 
 | 		if (retval) { | 
 | 			if (retval == -EBUSY) | 
 | 				warn("Slot %llu already registered by another " | 
 | 					"hotplug driver\n", slot->sun); | 
 | 			else | 
 | 				warn("acpiphp_register_hotplug_slot failed " | 
 | 					"(err code = 0x%x)\n", retval); | 
 | 			goto err_exit; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	newfunc->slot = slot; | 
 | 	list_add_tail(&newfunc->sibling, &slot->funcs); | 
 |  | 
 | 	pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); | 
 | 	if (pdev) { | 
 | 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); | 
 | 		pci_dev_put(pdev); | 
 | 	} | 
 |  | 
 | 	if (is_dock_device(handle)) { | 
 | 		/* we don't want to call this device's _EJ0 | 
 | 		 * because we want the dock notify handler | 
 | 		 * to call it after it calls _DCK | 
 | 		 */ | 
 | 		newfunc->flags &= ~FUNC_HAS_EJ0; | 
 | 		if (register_hotplug_dock_device(handle, | 
 | 			&acpiphp_dock_ops, newfunc)) | 
 | 			dbg("failed to register dock device\n"); | 
 |  | 
 | 		/* we need to be notified when dock events happen | 
 | 		 * outside of the hotplug operation, since we may | 
 | 		 * need to do fixups before we can hotplug. | 
 | 		 */ | 
 | 		newfunc->nb.notifier_call = post_dock_fixups; | 
 | 		if (register_dock_notifier(&newfunc->nb)) | 
 | 			dbg("failed to register a dock notifier"); | 
 | 	} | 
 |  | 
 | 	/* install notify handler */ | 
 | 	if (!(newfunc->flags & FUNC_HAS_DCK)) { | 
 | 		status = acpi_install_notify_handler(handle, | 
 | 					     ACPI_SYSTEM_NOTIFY, | 
 | 					     handle_hotplug_event_func, | 
 | 					     newfunc); | 
 |  | 
 | 		if (ACPI_FAILURE(status)) | 
 | 			err("failed to register interrupt notify handler\n"); | 
 | 	} else | 
 | 		status = AE_OK; | 
 |  | 
 | 	return status; | 
 |  | 
 |  err_exit: | 
 | 	bridge->nr_slots--; | 
 | 	bridge->slots = slot->next; | 
 | 	kfree(slot); | 
 | 	kfree(newfunc); | 
 |  | 
 | 	return AE_OK; | 
 | } | 
 |  | 
 |  | 
 | /* see if it's worth looking at this bridge */ | 
 | static int detect_ejectable_slots(acpi_handle handle) | 
 | { | 
 | 	int found = acpi_pci_detect_ejectable(handle); | 
 | 	if (!found) { | 
 | 		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | 
 | 				    is_pci_dock_device, NULL, (void *)&found, NULL); | 
 | 	} | 
 | 	return found; | 
 | } | 
 |  | 
 | /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */ | 
 | static void init_bridge_misc(struct acpiphp_bridge *bridge) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	/* must be added to the list prior to calling register_slot */ | 
 | 	list_add(&bridge->list, &bridge_list); | 
 |  | 
 | 	/* register all slot objects under this bridge */ | 
 | 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1, | 
 | 				     register_slot, NULL, bridge, NULL); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		list_del(&bridge->list); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* install notify handler */ | 
 | 	if (bridge->type != BRIDGE_TYPE_HOST) { | 
 | 		if ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func) { | 
 | 			status = acpi_remove_notify_handler(bridge->func->handle, | 
 | 						ACPI_SYSTEM_NOTIFY, | 
 | 						handle_hotplug_event_func); | 
 | 			if (ACPI_FAILURE(status)) | 
 | 				err("failed to remove notify handler\n"); | 
 | 		} | 
 | 		status = acpi_install_notify_handler(bridge->handle, | 
 | 					     ACPI_SYSTEM_NOTIFY, | 
 | 					     handle_hotplug_event_bridge, | 
 | 					     bridge); | 
 |  | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			err("failed to register interrupt notify handler\n"); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* find acpiphp_func from acpiphp_bridge */ | 
 | static struct acpiphp_func *acpiphp_bridge_handle_to_function(acpi_handle handle) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	struct acpiphp_slot *slot; | 
 | 	struct acpiphp_func *func; | 
 |  | 
 | 	list_for_each_entry(bridge, &bridge_list, list) { | 
 | 		for (slot = bridge->slots; slot; slot = slot->next) { | 
 | 			list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 				if (func->handle == handle) | 
 | 					return func; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 |  | 
 | static inline void config_p2p_bridge_flags(struct acpiphp_bridge *bridge) | 
 | { | 
 | 	acpi_handle dummy_handle; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | 
 | 					"_STA", &dummy_handle))) | 
 | 		bridge->flags |= BRIDGE_HAS_STA; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | 
 | 					"_EJ0", &dummy_handle))) | 
 | 		bridge->flags |= BRIDGE_HAS_EJ0; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | 
 | 					"_PS0", &dummy_handle))) | 
 | 		bridge->flags |= BRIDGE_HAS_PS0; | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | 
 | 					"_PS3", &dummy_handle))) | 
 | 		bridge->flags |= BRIDGE_HAS_PS3; | 
 |  | 
 | 	/* is this ejectable p2p bridge? */ | 
 | 	if (bridge->flags & BRIDGE_HAS_EJ0) { | 
 | 		struct acpiphp_func *func; | 
 |  | 
 | 		dbg("found ejectable p2p bridge\n"); | 
 |  | 
 | 		/* make link between PCI bridge and PCI function */ | 
 | 		func = acpiphp_bridge_handle_to_function(bridge->handle); | 
 | 		if (!func) | 
 | 			return; | 
 | 		bridge->func = func; | 
 | 		func->bridge = bridge; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* allocate and initialize host bridge data structure */ | 
 | static void add_host_bridge(acpi_handle *handle) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	struct acpi_pci_root *root = acpi_pci_find_root(handle); | 
 |  | 
 | 	bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); | 
 | 	if (bridge == NULL) | 
 | 		return; | 
 |  | 
 | 	bridge->type = BRIDGE_TYPE_HOST; | 
 | 	bridge->handle = handle; | 
 |  | 
 | 	bridge->pci_bus = root->bus; | 
 |  | 
 | 	spin_lock_init(&bridge->res_lock); | 
 |  | 
 | 	init_bridge_misc(bridge); | 
 | } | 
 |  | 
 |  | 
 | /* allocate and initialize PCI-to-PCI bridge data structure */ | 
 | static void add_p2p_bridge(acpi_handle *handle) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 |  | 
 | 	bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); | 
 | 	if (bridge == NULL) { | 
 | 		err("out of memory\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bridge->type = BRIDGE_TYPE_P2P; | 
 | 	bridge->handle = handle; | 
 | 	config_p2p_bridge_flags(bridge); | 
 |  | 
 | 	bridge->pci_dev = acpi_get_pci_dev(handle); | 
 | 	bridge->pci_bus = bridge->pci_dev->subordinate; | 
 | 	if (!bridge->pci_bus) { | 
 | 		err("This is not a PCI-to-PCI bridge!\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Grab a ref to the subordinate PCI bus in case the bus is | 
 | 	 * removed via PCI core logical hotplug. The ref pins the bus | 
 | 	 * (which we access during module unload). | 
 | 	 */ | 
 | 	get_device(&bridge->pci_bus->dev); | 
 | 	spin_lock_init(&bridge->res_lock); | 
 |  | 
 | 	init_bridge_misc(bridge); | 
 | 	return; | 
 |  err: | 
 | 	pci_dev_put(bridge->pci_dev); | 
 | 	kfree(bridge); | 
 | 	return; | 
 | } | 
 |  | 
 |  | 
 | /* callback routine to find P2P bridges */ | 
 | static acpi_status | 
 | find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct pci_dev *dev; | 
 |  | 
 | 	dev = acpi_get_pci_dev(handle); | 
 | 	if (!dev || !dev->subordinate) | 
 | 		goto out; | 
 |  | 
 | 	/* check if this bridge has ejectable slots */ | 
 | 	if ((detect_ejectable_slots(handle) > 0)) { | 
 | 		dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev)); | 
 | 		add_p2p_bridge(handle); | 
 | 	} | 
 |  | 
 | 	/* search P2P bridges under this p2p bridge */ | 
 | 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | 
 | 				     find_p2p_bridge, NULL, NULL, NULL); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status); | 
 |  | 
 |  out: | 
 | 	pci_dev_put(dev); | 
 | 	return AE_OK; | 
 | } | 
 |  | 
 |  | 
 | /* find hot-pluggable slots, and then find P2P bridge */ | 
 | static int add_bridge(acpi_handle handle) | 
 | { | 
 | 	acpi_status status; | 
 | 	unsigned long long tmp; | 
 | 	acpi_handle dummy_handle; | 
 |  | 
 | 	/* if the bridge doesn't have _STA, we assume it is always there */ | 
 | 	status = acpi_get_handle(handle, "_STA", &dummy_handle); | 
 | 	if (ACPI_SUCCESS(status)) { | 
 | 		status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			dbg("%s: _STA evaluation failure\n", __func__); | 
 | 			return 0; | 
 | 		} | 
 | 		if ((tmp & ACPI_STA_FUNCTIONING) == 0) | 
 | 			/* don't register this object */ | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	/* check if this bridge has ejectable slots */ | 
 | 	if (detect_ejectable_slots(handle) > 0) { | 
 | 		dbg("found PCI host-bus bridge with hot-pluggable slots\n"); | 
 | 		add_host_bridge(handle); | 
 | 	} | 
 |  | 
 | 	/* search P2P bridges under this host bridge */ | 
 | 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | 
 | 				     find_p2p_bridge, NULL, NULL, NULL); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		warn("find_p2p_bridge failed (error code = 0x%x)\n", status); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 |  | 
 | 	list_for_each_entry(bridge, &bridge_list, list) | 
 | 		if (bridge->handle == handle) | 
 | 			return bridge; | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void cleanup_bridge(struct acpiphp_bridge *bridge) | 
 | { | 
 | 	struct acpiphp_slot *slot, *next; | 
 | 	struct acpiphp_func *func, *tmp; | 
 | 	acpi_status status; | 
 | 	acpi_handle handle = bridge->handle; | 
 |  | 
 | 	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | 
 | 					    handle_hotplug_event_bridge); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		err("failed to remove notify handler\n"); | 
 |  | 
 | 	if ((bridge->type != BRIDGE_TYPE_HOST) && | 
 | 	    ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func)) { | 
 | 		status = acpi_install_notify_handler(bridge->func->handle, | 
 | 						ACPI_SYSTEM_NOTIFY, | 
 | 						handle_hotplug_event_func, | 
 | 						bridge->func); | 
 | 		if (ACPI_FAILURE(status)) | 
 | 			err("failed to install interrupt notify handler\n"); | 
 | 	} | 
 |  | 
 | 	slot = bridge->slots; | 
 | 	while (slot) { | 
 | 		next = slot->next; | 
 | 		list_for_each_entry_safe(func, tmp, &slot->funcs, sibling) { | 
 | 			if (is_dock_device(func->handle)) { | 
 | 				unregister_hotplug_dock_device(func->handle); | 
 | 				unregister_dock_notifier(&func->nb); | 
 | 			} | 
 | 			if (!(func->flags & FUNC_HAS_DCK)) { | 
 | 				status = acpi_remove_notify_handler(func->handle, | 
 | 						ACPI_SYSTEM_NOTIFY, | 
 | 						handle_hotplug_event_func); | 
 | 				if (ACPI_FAILURE(status)) | 
 | 					err("failed to remove notify handler\n"); | 
 | 			} | 
 | 			list_del(&func->sibling); | 
 | 			kfree(func); | 
 | 		} | 
 | 		acpiphp_unregister_hotplug_slot(slot); | 
 | 		list_del(&slot->funcs); | 
 | 		kfree(slot); | 
 | 		slot = next; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Only P2P bridges have a pci_dev | 
 | 	 */ | 
 | 	if (bridge->pci_dev) | 
 | 		put_device(&bridge->pci_bus->dev); | 
 |  | 
 | 	pci_dev_put(bridge->pci_dev); | 
 | 	list_del(&bridge->list); | 
 | 	kfree(bridge); | 
 | } | 
 |  | 
 | static acpi_status | 
 | cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 |  | 
 | 	/* cleanup p2p bridges under this P2P bridge | 
 | 	   in a depth-first manner */ | 
 | 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | 
 | 				cleanup_p2p_bridge, NULL, NULL, NULL); | 
 |  | 
 | 	bridge = acpiphp_handle_to_bridge(handle); | 
 | 	if (bridge) | 
 | 		cleanup_bridge(bridge); | 
 |  | 
 | 	return AE_OK; | 
 | } | 
 |  | 
 | static void remove_bridge(acpi_handle handle) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 |  | 
 | 	/* cleanup p2p bridges under this host bridge | 
 | 	   in a depth-first manner */ | 
 | 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, | 
 | 				(u32)1, cleanup_p2p_bridge, NULL, NULL, NULL); | 
 |  | 
 | 	/* | 
 | 	 * On root bridges with hotplug slots directly underneath (ie, | 
 | 	 * no p2p bridge inbetween), we call cleanup_bridge().  | 
 | 	 * | 
 | 	 * The else clause cleans up root bridges that either had no | 
 | 	 * hotplug slots at all, or had a p2p bridge underneath. | 
 | 	 */ | 
 | 	bridge = acpiphp_handle_to_bridge(handle); | 
 | 	if (bridge) | 
 | 		cleanup_bridge(bridge); | 
 | 	else | 
 | 		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | 
 | 					   handle_hotplug_event_bridge); | 
 | } | 
 |  | 
 | static int power_on_slot(struct acpiphp_slot *slot) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct acpiphp_func *func; | 
 | 	int retval = 0; | 
 |  | 
 | 	/* if already enabled, just skip */ | 
 | 	if (slot->flags & SLOT_POWEREDON) | 
 | 		goto err_exit; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		if (func->flags & FUNC_HAS_PS0) { | 
 | 			dbg("%s: executing _PS0\n", __func__); | 
 | 			status = acpi_evaluate_object(func->handle, "_PS0", NULL, NULL); | 
 | 			if (ACPI_FAILURE(status)) { | 
 | 				warn("%s: _PS0 failed\n", __func__); | 
 | 				retval = -1; | 
 | 				goto err_exit; | 
 | 			} else | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* TBD: evaluate _STA to check if the slot is enabled */ | 
 |  | 
 | 	slot->flags |= SLOT_POWEREDON; | 
 |  | 
 |  err_exit: | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 | static int power_off_slot(struct acpiphp_slot *slot) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct acpiphp_func *func; | 
 |  | 
 | 	int retval = 0; | 
 |  | 
 | 	/* if already disabled, just skip */ | 
 | 	if ((slot->flags & SLOT_POWEREDON) == 0) | 
 | 		goto err_exit; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		if (func->flags & FUNC_HAS_PS3) { | 
 | 			status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL); | 
 | 			if (ACPI_FAILURE(status)) { | 
 | 				warn("%s: _PS3 failed\n", __func__); | 
 | 				retval = -1; | 
 | 				goto err_exit; | 
 | 			} else | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* TBD: evaluate _STA to check if the slot is disabled */ | 
 |  | 
 | 	slot->flags &= (~SLOT_POWEREDON); | 
 |  | 
 |  err_exit: | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_max_busnr - return the highest reserved bus number under the given bus. | 
 |  * @bus: bus to start search with | 
 |  */ | 
 | static unsigned char acpiphp_max_busnr(struct pci_bus *bus) | 
 | { | 
 | 	struct list_head *tmp; | 
 | 	unsigned char max, n; | 
 |  | 
 | 	/* | 
 | 	 * pci_bus_max_busnr will return the highest | 
 | 	 * reserved busnr for all these children. | 
 | 	 * that is equivalent to the bus->subordinate | 
 | 	 * value.  We don't want to use the parent's | 
 | 	 * bus->subordinate value because it could have | 
 | 	 * padding in it. | 
 | 	 */ | 
 | 	max = bus->secondary; | 
 |  | 
 | 	list_for_each(tmp, &bus->children) { | 
 | 		n = pci_bus_max_busnr(pci_bus_b(tmp)); | 
 | 		if (n > max) | 
 | 			max = n; | 
 | 	} | 
 | 	return max; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_bus_add - add a new bus to acpi subsystem | 
 |  * @func: acpiphp_func of the bridge | 
 |  */ | 
 | static int acpiphp_bus_add(struct acpiphp_func *func) | 
 | { | 
 | 	acpi_handle phandle; | 
 | 	struct acpi_device *device, *pdevice; | 
 | 	int ret_val; | 
 |  | 
 | 	acpi_get_parent(func->handle, &phandle); | 
 | 	if (acpi_bus_get_device(phandle, &pdevice)) { | 
 | 		dbg("no parent device, assuming NULL\n"); | 
 | 		pdevice = NULL; | 
 | 	} | 
 | 	if (!acpi_bus_get_device(func->handle, &device)) { | 
 | 		dbg("bus exists... trim\n"); | 
 | 		/* this shouldn't be in here, so remove | 
 | 		 * the bus then re-add it... | 
 | 		 */ | 
 | 		ret_val = acpi_bus_trim(device, 1); | 
 | 		dbg("acpi_bus_trim return %x\n", ret_val); | 
 | 	} | 
 |  | 
 | 	ret_val = acpi_bus_add(&device, pdevice, func->handle, | 
 | 		ACPI_BUS_TYPE_DEVICE); | 
 | 	if (ret_val) { | 
 | 		dbg("error adding bus, %x\n", | 
 | 			-ret_val); | 
 | 		goto acpiphp_bus_add_out; | 
 | 	} | 
 | 	ret_val = acpi_bus_start(device); | 
 |  | 
 | acpiphp_bus_add_out: | 
 | 	return ret_val; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_bus_trim - trim a bus from acpi subsystem | 
 |  * @handle: handle to acpi namespace | 
 |  */ | 
 | static int acpiphp_bus_trim(acpi_handle handle) | 
 | { | 
 | 	struct acpi_device *device; | 
 | 	int retval; | 
 |  | 
 | 	retval = acpi_bus_get_device(handle, &device); | 
 | 	if (retval) { | 
 | 		dbg("acpi_device not found\n"); | 
 | 		return retval; | 
 | 	} | 
 |  | 
 | 	retval = acpi_bus_trim(device, 1); | 
 | 	if (retval) | 
 | 		err("cannot remove from acpi list\n"); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void acpiphp_set_acpi_region(struct acpiphp_slot *slot) | 
 | { | 
 | 	struct acpiphp_func *func; | 
 | 	union acpi_object params[2]; | 
 | 	struct acpi_object_list arg_list; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		arg_list.count = 2; | 
 | 		arg_list.pointer = params; | 
 | 		params[0].type = ACPI_TYPE_INTEGER; | 
 | 		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG; | 
 | 		params[1].type = ACPI_TYPE_INTEGER; | 
 | 		params[1].integer.value = 1; | 
 | 		/* _REG is optional, we don't care about if there is failure */ | 
 | 		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * enable_device - enable, configure a slot | 
 |  * @slot: slot to be enabled | 
 |  * | 
 |  * This function should be called per *physical slot*, | 
 |  * not per each slot object in ACPI namespace. | 
 |  */ | 
 | static int __ref enable_device(struct acpiphp_slot *slot) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	struct pci_bus *bus = slot->bridge->pci_bus; | 
 | 	struct acpiphp_func *func; | 
 | 	int retval = 0; | 
 | 	int num, max, pass; | 
 | 	acpi_status status; | 
 |  | 
 | 	if (slot->flags & SLOT_ENABLED) | 
 | 		goto err_exit; | 
 |  | 
 | 	/* sanity check: dev should be NULL when hot-plugged in */ | 
 | 	dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0)); | 
 | 	if (dev) { | 
 | 		/* This case shouldn't happen */ | 
 | 		err("pci_dev structure already exists.\n"); | 
 | 		pci_dev_put(dev); | 
 | 		retval = -1; | 
 | 		goto err_exit; | 
 | 	} | 
 |  | 
 | 	num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); | 
 | 	if (num == 0) { | 
 | 		err("No new device found\n"); | 
 | 		retval = -1; | 
 | 		goto err_exit; | 
 | 	} | 
 |  | 
 | 	max = acpiphp_max_busnr(bus); | 
 | 	for (pass = 0; pass < 2; pass++) { | 
 | 		list_for_each_entry(dev, &bus->devices, bus_list) { | 
 | 			if (PCI_SLOT(dev->devfn) != slot->device) | 
 | 				continue; | 
 | 			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || | 
 | 			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { | 
 | 				max = pci_scan_bridge(bus, dev, max, pass); | 
 | 				if (pass && dev->subordinate) | 
 | 					pci_bus_size_bridges(dev->subordinate); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) | 
 | 		acpiphp_bus_add(func); | 
 |  | 
 | 	pci_bus_assign_resources(bus); | 
 | 	acpiphp_sanitize_bus(bus); | 
 | 	acpiphp_set_hpp_values(bus); | 
 | 	acpiphp_set_acpi_region(slot); | 
 | 	pci_enable_bridges(bus); | 
 | 	pci_bus_add_devices(bus); | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		dev = pci_get_slot(bus, PCI_DEVFN(slot->device, | 
 | 						  func->function)); | 
 | 		if (!dev) | 
 | 			continue; | 
 |  | 
 | 		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && | 
 | 		    dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { | 
 | 			pci_dev_put(dev); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); | 
 | 		if (ACPI_FAILURE(status)) | 
 | 			warn("find_p2p_bridge failed (error code = 0x%x)\n", | 
 | 				status); | 
 | 		pci_dev_put(dev); | 
 | 	} | 
 |  | 
 | 	slot->flags |= SLOT_ENABLED; | 
 |  | 
 |  err_exit: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void disable_bridges(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	list_for_each_entry(dev, &bus->devices, bus_list) { | 
 | 		if (dev->subordinate) { | 
 | 			disable_bridges(dev->subordinate); | 
 | 			pci_disable_device(dev); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * disable_device - disable a slot | 
 |  * @slot: ACPI PHP slot | 
 |  */ | 
 | static int disable_device(struct acpiphp_slot *slot) | 
 | { | 
 | 	struct acpiphp_func *func; | 
 | 	struct pci_dev *pdev; | 
 |  | 
 | 	/* is this slot already disabled? */ | 
 | 	if (!(slot->flags & SLOT_ENABLED)) | 
 | 		goto err_exit; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		if (func->bridge) { | 
 | 			/* cleanup p2p bridges under this P2P bridge */ | 
 | 			cleanup_p2p_bridge(func->bridge->handle, | 
 | 						(u32)1, NULL, NULL); | 
 | 			func->bridge = NULL; | 
 | 		} | 
 |  | 
 | 		pdev = pci_get_slot(slot->bridge->pci_bus, | 
 | 				    PCI_DEVFN(slot->device, func->function)); | 
 | 		if (pdev) { | 
 | 			pci_stop_bus_device(pdev); | 
 | 			if (pdev->subordinate) { | 
 | 				disable_bridges(pdev->subordinate); | 
 | 				pci_disable_device(pdev); | 
 | 			} | 
 | 			pci_remove_bus_device(pdev); | 
 | 			pci_dev_put(pdev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		acpiphp_bus_trim(func->handle); | 
 | 	} | 
 |  | 
 | 	slot->flags &= (~SLOT_ENABLED); | 
 |  | 
 | err_exit: | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * get_slot_status - get ACPI slot status | 
 |  * @slot: ACPI PHP slot | 
 |  * | 
 |  * If a slot has _STA for each function and if any one of them | 
 |  * returned non-zero status, return it. | 
 |  * | 
 |  * If a slot doesn't have _STA and if any one of its functions' | 
 |  * configuration space is configured, return 0x0f as a _STA. | 
 |  * | 
 |  * Otherwise return 0. | 
 |  */ | 
 | static unsigned int get_slot_status(struct acpiphp_slot *slot) | 
 | { | 
 | 	acpi_status status; | 
 | 	unsigned long long sta = 0; | 
 | 	u32 dvid; | 
 | 	struct acpiphp_func *func; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		if (func->flags & FUNC_HAS_STA) { | 
 | 			status = acpi_evaluate_integer(func->handle, "_STA", NULL, &sta); | 
 | 			if (ACPI_SUCCESS(status) && sta) | 
 | 				break; | 
 | 		} else { | 
 | 			pci_bus_read_config_dword(slot->bridge->pci_bus, | 
 | 						  PCI_DEVFN(slot->device, | 
 | 							    func->function), | 
 | 						  PCI_VENDOR_ID, &dvid); | 
 | 			if (dvid != 0xffffffff) { | 
 | 				sta = ACPI_STA_ALL; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return (unsigned int)sta; | 
 | } | 
 |  | 
 | /** | 
 |  * acpiphp_eject_slot - physically eject the slot | 
 |  * @slot: ACPI PHP slot | 
 |  */ | 
 | int acpiphp_eject_slot(struct acpiphp_slot *slot) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct acpiphp_func *func; | 
 | 	struct acpi_object_list arg_list; | 
 | 	union acpi_object arg; | 
 |  | 
 | 	list_for_each_entry(func, &slot->funcs, sibling) { | 
 | 		/* We don't want to call _EJ0 on non-existing functions. */ | 
 | 		if ((func->flags & FUNC_HAS_EJ0)) { | 
 | 			/* _EJ0 method take one argument */ | 
 | 			arg_list.count = 1; | 
 | 			arg_list.pointer = &arg; | 
 | 			arg.type = ACPI_TYPE_INTEGER; | 
 | 			arg.integer.value = 1; | 
 |  | 
 | 			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL); | 
 | 			if (ACPI_FAILURE(status)) { | 
 | 				warn("%s: _EJ0 failed\n", __func__); | 
 | 				return -1; | 
 | 			} else | 
 | 				break; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * acpiphp_check_bridge - re-enumerate devices | 
 |  * @bridge: where to begin re-enumeration | 
 |  * | 
 |  * Iterate over all slots under this bridge and make sure that if a | 
 |  * card is present they are enabled, and if not they are disabled. | 
 |  */ | 
 | static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) | 
 | { | 
 | 	struct acpiphp_slot *slot; | 
 | 	int retval = 0; | 
 | 	int enabled, disabled; | 
 |  | 
 | 	enabled = disabled = 0; | 
 |  | 
 | 	for (slot = bridge->slots; slot; slot = slot->next) { | 
 | 		unsigned int status = get_slot_status(slot); | 
 | 		if (slot->flags & SLOT_ENABLED) { | 
 | 			if (status == ACPI_STA_ALL) | 
 | 				continue; | 
 | 			retval = acpiphp_disable_slot(slot); | 
 | 			if (retval) { | 
 | 				err("Error occurred in disabling\n"); | 
 | 				goto err_exit; | 
 | 			} else { | 
 | 				acpiphp_eject_slot(slot); | 
 | 			} | 
 | 			disabled++; | 
 | 		} else { | 
 | 			if (status != ACPI_STA_ALL) | 
 | 				continue; | 
 | 			retval = acpiphp_enable_slot(slot); | 
 | 			if (retval) { | 
 | 				err("Error occurred in enabling\n"); | 
 | 				goto err_exit; | 
 | 			} | 
 | 			enabled++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dbg("%s: %d enabled, %d disabled\n", __func__, enabled, disabled); | 
 |  | 
 |  err_exit: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void acpiphp_set_hpp_values(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_dev *dev; | 
 |  | 
 | 	list_for_each_entry(dev, &bus->devices, bus_list) | 
 | 		pci_configure_slot(dev); | 
 | } | 
 |  | 
 | /* | 
 |  * Remove devices for which we could not assign resources, call | 
 |  * arch specific code to fix-up the bus | 
 |  */ | 
 | static void acpiphp_sanitize_bus(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	int i; | 
 | 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM; | 
 |  | 
 | 	list_for_each_entry(dev, &bus->devices, bus_list) { | 
 | 		for (i=0; i<PCI_BRIDGE_RESOURCES; i++) { | 
 | 			struct resource *res = &dev->resource[i]; | 
 | 			if ((res->flags & type_mask) && !res->start && | 
 | 					res->end) { | 
 | 				/* Could not assign a required resources | 
 | 				 * for this device, remove it */ | 
 | 				pci_remove_bus_device(dev); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Program resources in newly inserted bridge */ | 
 | static int acpiphp_configure_bridge (acpi_handle handle) | 
 | { | 
 | 	struct pci_bus *bus; | 
 |  | 
 | 	if (acpi_is_root_bridge(handle)) { | 
 | 		struct acpi_pci_root *root = acpi_pci_find_root(handle); | 
 | 		bus = root->bus; | 
 | 	} else { | 
 | 		struct pci_dev *pdev = acpi_get_pci_dev(handle); | 
 | 		bus = pdev->subordinate; | 
 | 		pci_dev_put(pdev); | 
 | 	} | 
 |  | 
 | 	pci_bus_size_bridges(bus); | 
 | 	pci_bus_assign_resources(bus); | 
 | 	acpiphp_sanitize_bus(bus); | 
 | 	acpiphp_set_hpp_values(bus); | 
 | 	pci_enable_bridges(bus); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void handle_bridge_insertion(acpi_handle handle, u32 type) | 
 | { | 
 | 	struct acpi_device *device, *pdevice; | 
 | 	acpi_handle phandle; | 
 |  | 
 | 	if ((type != ACPI_NOTIFY_BUS_CHECK) && | 
 | 			(type != ACPI_NOTIFY_DEVICE_CHECK)) { | 
 | 		err("unexpected notification type %d\n", type); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	acpi_get_parent(handle, &phandle); | 
 | 	if (acpi_bus_get_device(phandle, &pdevice)) { | 
 | 		dbg("no parent device, assuming NULL\n"); | 
 | 		pdevice = NULL; | 
 | 	} | 
 | 	if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) { | 
 | 		err("cannot add bridge to acpi list\n"); | 
 | 		return; | 
 | 	} | 
 | 	if (!acpiphp_configure_bridge(handle) && | 
 | 		!acpi_bus_start(device)) | 
 | 		add_bridge(handle); | 
 | 	else | 
 | 		err("cannot configure and start bridge\n"); | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * ACPI event handlers | 
 |  */ | 
 |  | 
 | static acpi_status | 
 | count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	int *count = (int *)context; | 
 | 	struct acpiphp_bridge *bridge; | 
 |  | 
 | 	bridge = acpiphp_handle_to_bridge(handle); | 
 | 	if (bridge) | 
 | 		(*count)++; | 
 | 	return AE_OK ; | 
 | } | 
 |  | 
 | static acpi_status | 
 | check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	char objname[64]; | 
 | 	struct acpi_buffer buffer = { .length = sizeof(objname), | 
 | 				      .pointer = objname }; | 
 |  | 
 | 	bridge = acpiphp_handle_to_bridge(handle); | 
 | 	if (bridge) { | 
 | 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); | 
 | 		dbg("%s: re-enumerating slots under %s\n", | 
 | 			__func__, objname); | 
 | 		acpiphp_check_bridge(bridge); | 
 | 	} | 
 | 	return AE_OK ; | 
 | } | 
 |  | 
 | /** | 
 |  * handle_hotplug_event_bridge - handle ACPI event on bridges | 
 |  * @handle: Notify()'ed acpi_handle | 
 |  * @type: Notify code | 
 |  * @context: pointer to acpiphp_bridge structure | 
 |  * | 
 |  * Handles ACPI event notification on {host,p2p} bridges. | 
 |  */ | 
 | static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	char objname[64]; | 
 | 	struct acpi_buffer buffer = { .length = sizeof(objname), | 
 | 				      .pointer = objname }; | 
 | 	struct acpi_device *device; | 
 | 	int num_sub_bridges = 0; | 
 |  | 
 | 	if (acpi_bus_get_device(handle, &device)) { | 
 | 		/* This bridge must have just been physically inserted */ | 
 | 		handle_bridge_insertion(handle, type); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bridge = acpiphp_handle_to_bridge(handle); | 
 | 	if (type == ACPI_NOTIFY_BUS_CHECK) { | 
 | 		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX, | 
 | 			count_sub_bridges, NULL, &num_sub_bridges, NULL); | 
 | 	} | 
 |  | 
 | 	if (!bridge && !num_sub_bridges) { | 
 | 		err("cannot get bridge info\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); | 
 |  | 
 | 	switch (type) { | 
 | 	case ACPI_NOTIFY_BUS_CHECK: | 
 | 		/* bus re-enumerate */ | 
 | 		dbg("%s: Bus check notify on %s\n", __func__, objname); | 
 | 		if (bridge) { | 
 | 			dbg("%s: re-enumerating slots under %s\n", | 
 | 				__func__, objname); | 
 | 			acpiphp_check_bridge(bridge); | 
 | 		} | 
 | 		if (num_sub_bridges) | 
 | 			acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, | 
 | 				ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_CHECK: | 
 | 		/* device check */ | 
 | 		dbg("%s: Device check notify on %s\n", __func__, objname); | 
 | 		acpiphp_check_bridge(bridge); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_WAKE: | 
 | 		/* wake event */ | 
 | 		dbg("%s: Device wake notify on %s\n", __func__, objname); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_EJECT_REQUEST: | 
 | 		/* request device eject */ | 
 | 		dbg("%s: Device eject notify on %s\n", __func__, objname); | 
 | 		if ((bridge->type != BRIDGE_TYPE_HOST) && | 
 | 		    (bridge->flags & BRIDGE_HAS_EJ0)) { | 
 | 			struct acpiphp_slot *slot; | 
 | 			slot = bridge->func->slot; | 
 | 			if (!acpiphp_disable_slot(slot)) | 
 | 				acpiphp_eject_slot(slot); | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_FREQUENCY_MISMATCH: | 
 | 		printk(KERN_ERR "Device %s cannot be configured due" | 
 | 				" to a frequency mismatch\n", objname); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_BUS_MODE_MISMATCH: | 
 | 		printk(KERN_ERR "Device %s cannot be configured due" | 
 | 				" to a bus mode mismatch\n", objname); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_POWER_FAULT: | 
 | 		printk(KERN_ERR "Device %s has suffered a power fault\n", | 
 | 				objname); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots) | 
 |  * @handle: Notify()'ed acpi_handle | 
 |  * @type: Notify code | 
 |  * @context: pointer to acpiphp_func structure | 
 |  * | 
 |  * Handles ACPI event notification on slots. | 
 |  */ | 
 | static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context) | 
 | { | 
 | 	struct acpiphp_func *func; | 
 | 	char objname[64]; | 
 | 	struct acpi_buffer buffer = { .length = sizeof(objname), | 
 | 				      .pointer = objname }; | 
 |  | 
 | 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); | 
 |  | 
 | 	func = (struct acpiphp_func *)context; | 
 |  | 
 | 	switch (type) { | 
 | 	case ACPI_NOTIFY_BUS_CHECK: | 
 | 		/* bus re-enumerate */ | 
 | 		dbg("%s: Bus check notify on %s\n", __func__, objname); | 
 | 		acpiphp_enable_slot(func->slot); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_CHECK: | 
 | 		/* device check : re-enumerate from parent bus */ | 
 | 		dbg("%s: Device check notify on %s\n", __func__, objname); | 
 | 		acpiphp_check_bridge(func->slot->bridge); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_WAKE: | 
 | 		/* wake event */ | 
 | 		dbg("%s: Device wake notify on %s\n", __func__, objname); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_EJECT_REQUEST: | 
 | 		/* request device eject */ | 
 | 		dbg("%s: Device eject notify on %s\n", __func__, objname); | 
 | 		if (!(acpiphp_disable_slot(func->slot))) | 
 | 			acpiphp_eject_slot(func->slot); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | static acpi_status | 
 | find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) | 
 | { | 
 | 	int *count = (int *)context; | 
 |  | 
 | 	if (acpi_is_root_bridge(handle)) { | 
 | 		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | 
 | 				handle_hotplug_event_bridge, NULL); | 
 | 			(*count)++; | 
 | 	} | 
 | 	return AE_OK ; | 
 | } | 
 |  | 
 | static struct acpi_pci_driver acpi_pci_hp_driver = { | 
 | 	.add =		add_bridge, | 
 | 	.remove =	remove_bridge, | 
 | }; | 
 |  | 
 | /** | 
 |  * acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures | 
 |  */ | 
 | int __init acpiphp_glue_init(void) | 
 | { | 
 | 	int num = 0; | 
 |  | 
 | 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, | 
 | 			ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL); | 
 |  | 
 | 	if (num <= 0) | 
 | 		return -1; | 
 | 	else | 
 | 		acpi_pci_register_driver(&acpi_pci_hp_driver); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures | 
 |  * | 
 |  * This function frees all data allocated in acpiphp_glue_init(). | 
 |  */ | 
 | void  acpiphp_glue_exit(void) | 
 | { | 
 | 	acpi_pci_unregister_driver(&acpi_pci_hp_driver); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_get_num_slots - count number of slots in a system | 
 |  */ | 
 | int __init acpiphp_get_num_slots(void) | 
 | { | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	int num_slots = 0; | 
 |  | 
 | 	list_for_each_entry(bridge, &bridge_list, list) { | 
 | 		dbg("Bus %04x:%02x has %d slot%s\n", | 
 | 				pci_domain_nr(bridge->pci_bus), | 
 | 				bridge->pci_bus->number, bridge->nr_slots, | 
 | 				bridge->nr_slots == 1 ? "" : "s"); | 
 | 		num_slots += bridge->nr_slots; | 
 | 	} | 
 |  | 
 | 	dbg("Total %d slots\n", num_slots); | 
 | 	return num_slots; | 
 | } | 
 |  | 
 |  | 
 | #if 0 | 
 | /** | 
 |  * acpiphp_for_each_slot - call function for each slot | 
 |  * @fn: callback function | 
 |  * @data: context to be passed to callback function | 
 |  */ | 
 | static int acpiphp_for_each_slot(acpiphp_callback fn, void *data) | 
 | { | 
 | 	struct list_head *node; | 
 | 	struct acpiphp_bridge *bridge; | 
 | 	struct acpiphp_slot *slot; | 
 | 	int retval = 0; | 
 |  | 
 | 	list_for_each (node, &bridge_list) { | 
 | 		bridge = (struct acpiphp_bridge *)node; | 
 | 		for (slot = bridge->slots; slot; slot = slot->next) { | 
 | 			retval = fn(slot, data); | 
 | 			if (!retval) | 
 | 				goto err_exit; | 
 | 		} | 
 | 	} | 
 |  | 
 |  err_exit: | 
 | 	return retval; | 
 | } | 
 | #endif | 
 |  | 
 |  | 
 | /** | 
 |  * acpiphp_enable_slot - power on slot | 
 |  * @slot: ACPI PHP slot | 
 |  */ | 
 | int acpiphp_enable_slot(struct acpiphp_slot *slot) | 
 | { | 
 | 	int retval; | 
 |  | 
 | 	mutex_lock(&slot->crit_sect); | 
 |  | 
 | 	/* wake up all functions */ | 
 | 	retval = power_on_slot(slot); | 
 | 	if (retval) | 
 | 		goto err_exit; | 
 |  | 
 | 	if (get_slot_status(slot) == ACPI_STA_ALL) { | 
 | 		/* configure all functions */ | 
 | 		retval = enable_device(slot); | 
 | 		if (retval) | 
 | 			power_off_slot(slot); | 
 | 	} else { | 
 | 		dbg("%s: Slot status is not ACPI_STA_ALL\n", __func__); | 
 | 		power_off_slot(slot); | 
 | 	} | 
 |  | 
 |  err_exit: | 
 | 	mutex_unlock(&slot->crit_sect); | 
 | 	return retval; | 
 | } | 
 |  | 
 | /** | 
 |  * acpiphp_disable_slot - power off slot | 
 |  * @slot: ACPI PHP slot | 
 |  */ | 
 | int acpiphp_disable_slot(struct acpiphp_slot *slot) | 
 | { | 
 | 	int retval = 0; | 
 |  | 
 | 	mutex_lock(&slot->crit_sect); | 
 |  | 
 | 	/* unconfigure all functions */ | 
 | 	retval = disable_device(slot); | 
 | 	if (retval) | 
 | 		goto err_exit; | 
 |  | 
 | 	/* power off all functions */ | 
 | 	retval = power_off_slot(slot); | 
 | 	if (retval) | 
 | 		goto err_exit; | 
 |  | 
 |  err_exit: | 
 | 	mutex_unlock(&slot->crit_sect); | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * slot enabled:  1 | 
 |  * slot disabled: 0 | 
 |  */ | 
 | u8 acpiphp_get_power_status(struct acpiphp_slot *slot) | 
 | { | 
 | 	return (slot->flags & SLOT_POWEREDON); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * latch   open:  1 | 
 |  * latch closed:  0 | 
 |  */ | 
 | u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) | 
 | { | 
 | 	unsigned int sta; | 
 |  | 
 | 	sta = get_slot_status(slot); | 
 |  | 
 | 	return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * adapter presence : 1 | 
 |  *          absence : 0 | 
 |  */ | 
 | u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot) | 
 | { | 
 | 	unsigned int sta; | 
 |  | 
 | 	sta = get_slot_status(slot); | 
 |  | 
 | 	return (sta == 0) ? 0 : 1; | 
 | } |