|  | #include <linux/types.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/zorro.h> | 
|  |  | 
|  | #include <asm/page.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/amigaints.h> | 
|  | #include <asm/amigahw.h> | 
|  |  | 
|  | #include "scsi.h" | 
|  | #include "wd33c93.h" | 
|  | #include "a2091.h" | 
|  |  | 
|  |  | 
|  | struct a2091_hostdata { | 
|  | struct WD33C93_hostdata wh; | 
|  | struct a2091_scsiregs *regs; | 
|  | }; | 
|  |  | 
|  | static irqreturn_t a2091_intr(int irq, void *data) | 
|  | { | 
|  | struct Scsi_Host *instance = data; | 
|  | struct a2091_hostdata *hdata = shost_priv(instance); | 
|  | unsigned int status = hdata->regs->ISTR; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | spin_lock_irqsave(instance->host_lock, flags); | 
|  | wd33c93_intr(instance); | 
|  | spin_unlock_irqrestore(instance->host_lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int dma_setup(struct scsi_cmnd *cmd, int dir_in) | 
|  | { | 
|  | struct Scsi_Host *instance = cmd->device->host; | 
|  | struct a2091_hostdata *hdata = shost_priv(instance); | 
|  | struct WD33C93_hostdata *wh = &hdata->wh; | 
|  | struct a2091_scsiregs *regs = hdata->regs; | 
|  | unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | 
|  | unsigned long addr = virt_to_bus(cmd->SCp.ptr); | 
|  |  | 
|  | /* don't allow DMA if the physical address is bad */ | 
|  | if (addr & A2091_XFER_MASK) { | 
|  | wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; | 
|  | wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | /* can't allocate memory; use PIO */ | 
|  | if (!wh->dma_bounce_buffer) { | 
|  | wh->dma_bounce_len = 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* get the physical address of the bounce buffer */ | 
|  | addr = virt_to_bus(wh->dma_bounce_buffer); | 
|  |  | 
|  | /* the bounce buffer may not be in the first 16M of physmem */ | 
|  | if (addr & A2091_XFER_MASK) { | 
|  | /* we could use chipmem... maybe later */ | 
|  | kfree(wh->dma_bounce_buffer); | 
|  | wh->dma_bounce_buffer = NULL; | 
|  | wh->dma_bounce_len = 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (!dir_in) { | 
|  | /* copy to bounce buffer for a write */ | 
|  | memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr, | 
|  | cmd->SCp.this_residual); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* setup dma direction */ | 
|  | if (!dir_in) | 
|  | cntr |= CNTR_DDIR; | 
|  |  | 
|  | /* remember direction */ | 
|  | wh->dma_dir = dir_in; | 
|  |  | 
|  | regs->CNTR = cntr; | 
|  |  | 
|  | /* setup DMA *physical* address */ | 
|  | regs->ACR = addr; | 
|  |  | 
|  | if (dir_in) { | 
|  | /* invalidate any cache */ | 
|  | cache_clear(addr, cmd->SCp.this_residual); | 
|  | } else { | 
|  | /* push any dirty cache */ | 
|  | cache_push(addr, cmd->SCp.this_residual); | 
|  | } | 
|  | /* start DMA */ | 
|  | regs->ST_DMA = 1; | 
|  |  | 
|  | /* return success */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, | 
|  | int status) | 
|  | { | 
|  | struct a2091_hostdata *hdata = shost_priv(instance); | 
|  | struct WD33C93_hostdata *wh = &hdata->wh; | 
|  | struct a2091_scsiregs *regs = hdata->regs; | 
|  |  | 
|  | /* disable SCSI interrupts */ | 
|  | unsigned short cntr = CNTR_PDMD; | 
|  |  | 
|  | if (!wh->dma_dir) | 
|  | cntr |= CNTR_DDIR; | 
|  |  | 
|  | /* disable SCSI interrupts */ | 
|  | regs->CNTR = cntr; | 
|  |  | 
|  | /* flush if we were reading */ | 
|  | if (wh->dma_dir) { | 
|  | regs->FLUSH = 1; | 
|  | while (!(regs->ISTR & ISTR_FE_FLG)) | 
|  | ; | 
|  | } | 
|  |  | 
|  | /* clear a possible interrupt */ | 
|  | regs->CINT = 1; | 
|  |  | 
|  | /* stop DMA */ | 
|  | regs->SP_DMA = 1; | 
|  |  | 
|  | /* restore the CONTROL bits (minus the direction flag) */ | 
|  | regs->CNTR = CNTR_PDMD | CNTR_INTEN; | 
|  |  | 
|  | /* copy from a bounce buffer, if necessary */ | 
|  | if (status && wh->dma_bounce_buffer) { | 
|  | if (wh->dma_dir) | 
|  | memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer, | 
|  | SCpnt->SCp.this_residual); | 
|  | kfree(wh->dma_bounce_buffer); | 
|  | wh->dma_bounce_buffer = NULL; | 
|  | wh->dma_bounce_len = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int a2091_bus_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct Scsi_Host *instance = cmd->device->host; | 
|  |  | 
|  | /* FIXME perform bus-specific reset */ | 
|  |  | 
|  | /* FIXME 2: kill this function, and let midlayer fall back | 
|  | to the same action, calling wd33c93_host_reset() */ | 
|  |  | 
|  | spin_lock_irq(instance->host_lock); | 
|  | wd33c93_host_reset(cmd); | 
|  | spin_unlock_irq(instance->host_lock); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template a2091_scsi_template = { | 
|  | .module			= THIS_MODULE, | 
|  | .name			= "Commodore A2091/A590 SCSI", | 
|  | .proc_info		= wd33c93_proc_info, | 
|  | .proc_name		= "A2901", | 
|  | .queuecommand		= wd33c93_queuecommand, | 
|  | .eh_abort_handler	= wd33c93_abort, | 
|  | .eh_bus_reset_handler	= a2091_bus_reset, | 
|  | .eh_host_reset_handler	= wd33c93_host_reset, | 
|  | .can_queue		= CAN_QUEUE, | 
|  | .this_id		= 7, | 
|  | .sg_tablesize		= SG_ALL, | 
|  | .cmd_per_lun		= CMD_PER_LUN, | 
|  | .use_clustering		= DISABLE_CLUSTERING | 
|  | }; | 
|  |  | 
|  | static int __devinit a2091_probe(struct zorro_dev *z, | 
|  | const struct zorro_device_id *ent) | 
|  | { | 
|  | struct Scsi_Host *instance; | 
|  | int error; | 
|  | struct a2091_scsiregs *regs; | 
|  | wd33c93_regs wdregs; | 
|  | struct a2091_hostdata *hdata; | 
|  |  | 
|  | if (!request_mem_region(z->resource.start, 256, "wd33c93")) | 
|  | return -EBUSY; | 
|  |  | 
|  | instance = scsi_host_alloc(&a2091_scsi_template, | 
|  | sizeof(struct a2091_hostdata)); | 
|  | if (!instance) { | 
|  | error = -ENOMEM; | 
|  | goto fail_alloc; | 
|  | } | 
|  |  | 
|  | instance->irq = IRQ_AMIGA_PORTS; | 
|  | instance->unique_id = z->slotaddr; | 
|  |  | 
|  | regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start); | 
|  | regs->DAWR = DAWR_A2091; | 
|  |  | 
|  | wdregs.SASR = ®s->SASR; | 
|  | wdregs.SCMD = ®s->SCMD; | 
|  |  | 
|  | hdata = shost_priv(instance); | 
|  | hdata->wh.no_sync = 0xff; | 
|  | hdata->wh.fast = 0; | 
|  | hdata->wh.dma_mode = CTRL_DMA; | 
|  | hdata->regs = regs; | 
|  |  | 
|  | wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10); | 
|  | error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, | 
|  | "A2091 SCSI", instance); | 
|  | if (error) | 
|  | goto fail_irq; | 
|  |  | 
|  | regs->CNTR = CNTR_PDMD | CNTR_INTEN; | 
|  |  | 
|  | error = scsi_add_host(instance, NULL); | 
|  | if (error) | 
|  | goto fail_host; | 
|  |  | 
|  | zorro_set_drvdata(z, instance); | 
|  |  | 
|  | scsi_scan_host(instance); | 
|  | return 0; | 
|  |  | 
|  | fail_host: | 
|  | free_irq(IRQ_AMIGA_PORTS, instance); | 
|  | fail_irq: | 
|  | scsi_host_put(instance); | 
|  | fail_alloc: | 
|  | release_mem_region(z->resource.start, 256); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void __devexit a2091_remove(struct zorro_dev *z) | 
|  | { | 
|  | struct Scsi_Host *instance = zorro_get_drvdata(z); | 
|  | struct a2091_hostdata *hdata = shost_priv(instance); | 
|  |  | 
|  | hdata->regs->CNTR = 0; | 
|  | scsi_remove_host(instance); | 
|  | free_irq(IRQ_AMIGA_PORTS, instance); | 
|  | scsi_host_put(instance); | 
|  | release_mem_region(z->resource.start, 256); | 
|  | } | 
|  |  | 
|  | static struct zorro_device_id a2091_zorro_tbl[] __devinitdata = { | 
|  | { ZORRO_PROD_CBM_A590_A2091_1 }, | 
|  | { ZORRO_PROD_CBM_A590_A2091_2 }, | 
|  | { 0 } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl); | 
|  |  | 
|  | static struct zorro_driver a2091_driver = { | 
|  | .name		= "a2091", | 
|  | .id_table	= a2091_zorro_tbl, | 
|  | .probe		= a2091_probe, | 
|  | .remove		= __devexit_p(a2091_remove), | 
|  | }; | 
|  |  | 
|  | static int __init a2091_init(void) | 
|  | { | 
|  | return zorro_register_driver(&a2091_driver); | 
|  | } | 
|  | module_init(a2091_init); | 
|  |  | 
|  | static void __exit a2091_exit(void) | 
|  | { | 
|  | zorro_unregister_driver(&a2091_driver); | 
|  | } | 
|  | module_exit(a2091_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("Commodore A2091/A590 SCSI"); | 
|  | MODULE_LICENSE("GPL"); |