drivers/ssb/driver_chipcommon.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * Sonics Silicon Backplane
  * Broadcom ChipCommon core driver
  *
  * Copyright 2005, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */

 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/pci.h>

 #include "ssb_private.h"


 /* Clock sources */
 enum ssb_clksrc {
 	/* PCI clock */
 	SSB_CHIPCO_CLKSRC_PCI,
 	/* Crystal slow clock oscillator */
 	SSB_CHIPCO_CLKSRC_XTALOS,
 	/* Low power oscillator */
 	SSB_CHIPCO_CLKSRC_LOPWROS,
 };


 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
 					u32 mask, u32 value)
 {
 	value &= mask;
 	value |= chipco_read32(cc, offset) & ~mask;
 	chipco_write32(cc, offset, value);

 	return value;
 }

 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 			      enum ssb_clkmode mode)
 {
 	struct ssb_device *ccdev = cc->dev;
 	struct ssb_bus *bus;
 	u32 tmp;

 	if (!ccdev)
 		return;
 	bus = ccdev->bus;
 	/* chipcommon cores prior to rev6 don't support dynamic clock control */
 	if (ccdev->id.revision < 6)
 		return;
 	/* chipcommon cores rev10 are a whole new ball game */
 	if (ccdev->id.revision >= 10)
 		return;
 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 		return;

 	switch (mode) {
 	case SSB_CLKMODE_SLOW:
 		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 		tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
 		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
 		break;
 	case SSB_CLKMODE_FAST:
 		ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
 		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
 		tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
 		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
 		break;
 	case SSB_CLKMODE_DYNAMIC:
 		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
 		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
 		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
 		if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
 			tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
 		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);

 		/* for dynamic control, we have to release our xtal_pu "force on" */
 		if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
 			ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
 		break;
 	default:
 		SSB_WARN_ON(1);
 	}
 }

 /* Get the Slow Clock Source */
 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;
 	u32 uninitialized_var(tmp);

 	if (cc->dev->id.revision < 6) {
 		if (bus->bustype == SSB_BUSTYPE_SSB ||
 		    bus->bustype == SSB_BUSTYPE_PCMCIA)
 			return SSB_CHIPCO_CLKSRC_XTALOS;
 		if (bus->bustype == SSB_BUSTYPE_PCI) {
 			pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
 			if (tmp & 0x10)
 				return SSB_CHIPCO_CLKSRC_PCI;
 			return SSB_CHIPCO_CLKSRC_XTALOS;
 		}
 	}
 	if (cc->dev->id.revision < 10) {
 		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 		tmp &= 0x7;
 		if (tmp == 0)
 			return SSB_CHIPCO_CLKSRC_LOPWROS;
 		if (tmp == 1)
 			return SSB_CHIPCO_CLKSRC_XTALOS;
 		if (tmp == 2)
 			return SSB_CHIPCO_CLKSRC_PCI;
 	}

 	return SSB_CHIPCO_CLKSRC_XTALOS;
 }

 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 {
 	int uninitialized_var(limit);
 	enum ssb_clksrc clocksrc;
 	int divisor = 1;
 	u32 tmp;

 	clocksrc = chipco_pctl_get_slowclksrc(cc);
 	if (cc->dev->id.revision < 6) {
 		switch (clocksrc) {
 		case SSB_CHIPCO_CLKSRC_PCI:
 			divisor = 64;
 			break;
 		case SSB_CHIPCO_CLKSRC_XTALOS:
 			divisor = 32;
 			break;
 		default:
 			SSB_WARN_ON(1);
 		}
 	} else if (cc->dev->id.revision < 10) {
 		switch (clocksrc) {
 		case SSB_CHIPCO_CLKSRC_LOPWROS:
 			break;
 		case SSB_CHIPCO_CLKSRC_XTALOS:
 		case SSB_CHIPCO_CLKSRC_PCI:
 			tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 			divisor = (tmp >> 16) + 1;
 			divisor *= 4;
 			break;
 		}
 	} else {
 		tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
 		divisor = (tmp >> 16) + 1;
 		divisor *= 4;
 	}

 	switch (clocksrc) {
 	case SSB_CHIPCO_CLKSRC_LOPWROS:
 		if (get_max)
 			limit = 43000;
 		else
 			limit = 25000;
 		break;
 	case SSB_CHIPCO_CLKSRC_XTALOS:
 		if (get_max)
 			limit = 20200000;
 		else
 			limit = 19800000;
 		break;
 	case SSB_CHIPCO_CLKSRC_PCI:
 		if (get_max)
 			limit = 34000000;
 		else
 			limit = 25000000;
 		break;
 	}
 	limit /= divisor;

 	return limit;
 }

 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;

 	if (bus->chip_id == 0x4321) {
 		if (bus->chip_rev == 0)
 			chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
 		else if (bus->chip_rev == 1)
 			chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
 	}

 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 		return;

 	if (cc->dev->id.revision >= 10) {
 		/* Set Idle Power clock rate to 1Mhz */
 		chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
 			       (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
 				0x0000FFFF) | 0x00040000);
 	} else {
 		int maxfreq;

 		maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
 		chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
 			       (maxfreq * 150 + 999999) / 1000000);
 		chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
 			       (maxfreq * 15 + 999999) / 1000000);
 	}
 }

 /* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
 static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;

 	switch (bus->chip_id) {
 	case 0x4312:
 	case 0x4322:
 	case 0x4328:
 		return 7000;
 	case 0x4325:
 		/* TODO: */
 	default:
 		return 15000;
 	}
 }

 /* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;
 	int minfreq;
 	unsigned int tmp;
 	u32 pll_on_delay;

 	if (bus->bustype != SSB_BUSTYPE_PCI)
 		return;

 	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
 		cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
 		return;
 	}

 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 		return;

 	minfreq = chipco_pctl_clockfreqlimit(cc, 0);
 	pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
 	tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
 	SSB_WARN_ON(tmp & ~0xFFFF);

 	cc->fast_pwrup_delay = tmp;
 }

 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 {
 	if (!cc->dev)
 		return; /* We don't have a ChipCommon */
 	if (cc->dev->id.revision >= 11)
 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
 	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
 	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	calc_fast_powerup_delay(cc);
 }

 void ssb_chipco_suspend(struct ssb_chipcommon *cc)
 {
 	if (!cc->dev)
 		return;
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
 }

 void ssb_chipco_resume(struct ssb_chipcommon *cc)
 {
 	if (!cc->dev)
 		return;
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 }

 /* Get the processor clock */
 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
                              u32 *plltype, u32 *n, u32 *m)
 {
 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 	switch (*plltype) {
 	case SSB_PLLTYPE_2:
 	case SSB_PLLTYPE_4:
 	case SSB_PLLTYPE_6:
 	case SSB_PLLTYPE_7:
 		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 		break;
 	case SSB_PLLTYPE_3:
 		/* 5350 uses m2 to control mips */
 		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 		break;
 	default:
 		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 		break;
 	}
 }

 /* Get the bus clock */
 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
 				 u32 *plltype, u32 *n, u32 *m)
 {
 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 	switch (*plltype) {
 	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 		break;
 	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 		if (cc->dev->bus->chip_id != 0x5365) {
 			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 			break;
 		}
 		/* Fallthough */
 	default:
 		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 	}
 }

 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 			    unsigned long ns)
 {
 	struct ssb_device *dev = cc->dev;
 	struct ssb_bus *bus = dev->bus;
 	u32 tmp;

 	/* set register for external IO to control LED. */
 	chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
 	tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;		/* Waitcount-3 = 10ns */
 	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;	/* Waitcount-1 = 40ns */
 	tmp |= DIV_ROUND_UP(240, ns);				/* Waitcount-0 = 240ns */
 	chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);	/* 0x01020a0c for a 100Mhz clock */

 	/* Set timing for the flash */
 	tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;	/* Waitcount-3 = 10nS */
 	tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;	/* Waitcount-1 = 10nS */
 	tmp |= DIV_ROUND_UP(120, ns);				/* Waitcount-0 = 120nS */
 	if ((bus->chip_id == 0x5365) ||
 	    (dev->id.revision < 9))
 		chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
 	if ((bus->chip_id == 0x5365) ||
 	    (dev->id.revision < 9) ||
 	    ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
 		chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);

 	if (bus->chip_id == 0x5350) {
 		/* Enable EXTIF */
 		tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;	  /* Waitcount-3 = 10ns */
 		tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
 		tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
 		tmp |= DIV_ROUND_UP(120, ns);			  /* Waitcount-0 = 120ns */
 		chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
 	}
 }

 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
 void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
 {
 	/* instant NMI */
 	chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
 }

 void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
 }

 u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
 {
 	return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
 }

 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
 {
 	return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
 }

 u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
 }

 u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
 }

 u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
 }
 EXPORT_SYMBOL(ssb_chipco_gpio_control);

 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
 }

 u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
 }

 #ifdef CONFIG_SSB_SERIAL
 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 			   struct ssb_serial_port *ports)
 {
 	struct ssb_bus *bus = cc->dev->bus;
 	int nr_ports = 0;
 	u32 plltype;
 	unsigned int irq;
 	u32 baud_base, div;
 	u32 i, n;
 	unsigned int ccrev = cc->dev->id.revision;

 	plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 	irq = ssb_mips_irq(cc->dev);

 	if (plltype == SSB_PLLTYPE_1) {
 		/* PLL clock */
 		baud_base = ssb_calc_clock_rate(plltype,
 						chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
 						chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
 		div = 1;
 	} else {
 		if (ccrev == 20) {
 			/* BCM5354 uses constant 25MHz clock */
 			baud_base = 25000000;
 			div = 48;
 			/* Set the override bit so we don't divide it */
 			chipco_write32(cc, SSB_CHIPCO_CORECTL,
 				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
 				       | SSB_CHIPCO_CORECTL_UARTCLK0);
 		} else if ((ccrev >= 11) && (ccrev != 15)) {
 			/* Fixed ALP clock */
 			baud_base = 20000000;
 			if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
 				/* FIXME: baud_base is different for devices with a PMU */
 				SSB_WARN_ON(1);
 			}
 			div = 1;
 			if (ccrev >= 21) {
 				/* Turn off UART clock before switching clocksource. */
 				chipco_write32(cc, SSB_CHIPCO_CORECTL,
 					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
 					       & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
 			}
 			/* Set the override bit so we don't divide it */
 			chipco_write32(cc, SSB_CHIPCO_CORECTL,
 				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
 				       | SSB_CHIPCO_CORECTL_UARTCLK0);
 			if (ccrev >= 21) {
 				/* Re-enable the UART clock. */
 				chipco_write32(cc, SSB_CHIPCO_CORECTL,
 					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
 					       | SSB_CHIPCO_CORECTL_UARTCLKEN);
 			}
 		} else if (ccrev >= 3) {
 			/* Internal backplane clock */
 			baud_base = ssb_clockspeed(bus);
 			div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
 			      & SSB_CHIPCO_CLKDIV_UART;
 		} else {
 			/* Fixed internal backplane clock */
 			baud_base = 88000000;
 			div = 48;
 		}

 		/* Clock source depends on strapping if UartClkOverride is unset */
 		if ((ccrev > 0) &&
 		    !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
 			if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
 			    SSB_CHIPCO_CAP_UARTCLK_INT) {
 				/* Internal divided backplane clock */
 				baud_base /= div;
 			} else {
 				/* Assume external clock of 1.8432 MHz */
 				baud_base = 1843200;
 			}
 		}
 	}

 	/* Determine the registers of the UARTs */
 	n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
 	for (i = 0; i < n; i++) {
 		void __iomem *cc_mmio;
 		void __iomem *uart_regs;

 		cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
 		uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
 		/* Offset changed at after rev 0 */
 		if (ccrev == 0)
 			uart_regs += (i * 8);
 		else
 			uart_regs += (i * 256);

 		nr_ports++;
 		ports[i].regs = uart_regs;
 		ports[i].irq = irq;
 		ports[i].baud_base = baud_base;
 		ports[i].reg_shift = 0;
 	}

 	return nr_ports;
 }
 #endif /* CONFIG_SSB_SERIAL */
	/*
	* Sonics Silicon Backplane
	* Broadcom ChipCommon core driver
	*
	* Copyright 2005, Broadcom Corporation
	* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/

	#include <linux/ssb/ssb.h>
	#include <linux/ssb/ssb_regs.h>
	#include <linux/pci.h>

	#include "ssb_private.h"


	/* Clock sources */
	enum ssb_clksrc {
	/* PCI clock */
	SSB_CHIPCO_CLKSRC_PCI,
	/* Crystal slow clock oscillator */
	SSB_CHIPCO_CLKSRC_XTALOS,
	/* Low power oscillator */
	SSB_CHIPCO_CLKSRC_LOPWROS,
	};


	static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
	u32 mask, u32 value)
	{
	value &= mask;
	value \|= chipco_read32(cc, offset) & ~mask;
	chipco_write32(cc, offset, value);

	return value;
	}

	void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
	enum ssb_clkmode mode)
	{
	struct ssb_device *ccdev = cc->dev;
	struct ssb_bus *bus;
	u32 tmp;

	if (!ccdev)
	return;
	bus = ccdev->bus;
	/* chipcommon cores prior to rev6 don't support dynamic clock control */
	if (ccdev->id.revision < 6)
	return;
	/* chipcommon cores rev10 are a whole new ball game */
	if (ccdev->id.revision >= 10)
	return;
	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
	return;

	switch (mode) {
	case SSB_CLKMODE_SLOW:
	tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
	tmp \|= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
	chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
	break;
	case SSB_CLKMODE_FAST:
	ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
	tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
	tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
	tmp \|= SSB_CHIPCO_SLOWCLKCTL_IPLL;
	chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
	break;
	case SSB_CLKMODE_DYNAMIC:
	tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
	tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
	tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
	tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
	if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
	tmp \|= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
	chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);

	/* for dynamic control, we have to release our xtal_pu "force on" */
	if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
	ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
	break;
	default:
	SSB_WARN_ON(1);
	}
	}

	/* Get the Slow Clock Source */
	static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
	{
	struct ssb_bus *bus = cc->dev->bus;
	u32 uninitialized_var(tmp);

	if (cc->dev->id.revision < 6) {
	if (bus->bustype == SSB_BUSTYPE_SSB \|\|
	bus->bustype == SSB_BUSTYPE_PCMCIA)
	return SSB_CHIPCO_CLKSRC_XTALOS;
	if (bus->bustype == SSB_BUSTYPE_PCI) {
	pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
	if (tmp & 0x10)
	return SSB_CHIPCO_CLKSRC_PCI;
	return SSB_CHIPCO_CLKSRC_XTALOS;
	}
	}
	if (cc->dev->id.revision < 10) {
	tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
	tmp &= 0x7;
	if (tmp == 0)
	return SSB_CHIPCO_CLKSRC_LOPWROS;
	if (tmp == 1)
	return SSB_CHIPCO_CLKSRC_XTALOS;
	if (tmp == 2)
	return SSB_CHIPCO_CLKSRC_PCI;
	}

	return SSB_CHIPCO_CLKSRC_XTALOS;
	}

	/* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
	static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
	{
	int uninitialized_var(limit);
	enum ssb_clksrc clocksrc;
	int divisor = 1;
	u32 tmp;

	clocksrc = chipco_pctl_get_slowclksrc(cc);
	if (cc->dev->id.revision < 6) {
	switch (clocksrc) {
	case SSB_CHIPCO_CLKSRC_PCI:
	divisor = 64;
	break;
	case SSB_CHIPCO_CLKSRC_XTALOS:
	divisor = 32;
	break;
	default:
	SSB_WARN_ON(1);
	}
	} else if (cc->dev->id.revision < 10) {
	switch (clocksrc) {
	case SSB_CHIPCO_CLKSRC_LOPWROS:
	break;
	case SSB_CHIPCO_CLKSRC_XTALOS:
	case SSB_CHIPCO_CLKSRC_PCI:
	tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
	divisor = (tmp >> 16) + 1;
	divisor *= 4;
	break;
	}
	} else {
	tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
	divisor = (tmp >> 16) + 1;
	divisor *= 4;
	}

	switch (clocksrc) {
	case SSB_CHIPCO_CLKSRC_LOPWROS:
	if (get_max)
	limit = 43000;
	else
	limit = 25000;
	break;
	case SSB_CHIPCO_CLKSRC_XTALOS:
	if (get_max)
	limit = 20200000;
	else
	limit = 19800000;
	break;
	case SSB_CHIPCO_CLKSRC_PCI:
	if (get_max)
	limit = 34000000;
	else
	limit = 25000000;
	break;
	}
	limit /= divisor;

	return limit;
	}

	static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
	{
	struct ssb_bus *bus = cc->dev->bus;

	if (bus->chip_id == 0x4321) {
	if (bus->chip_rev == 0)
	chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
	else if (bus->chip_rev == 1)
	chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
	}

	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
	return;

	if (cc->dev->id.revision >= 10) {
	/* Set Idle Power clock rate to 1Mhz */
	chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
	(chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
	0x0000FFFF) \| 0x00040000);
	} else {
	int maxfreq;

	maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
	chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
	(maxfreq * 150 + 999999) / 1000000);
	chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
	(maxfreq * 15 + 999999) / 1000000);
	}
	}

	/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
	static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
	{
	struct ssb_bus *bus = cc->dev->bus;

	switch (bus->chip_id) {
	case 0x4312:
	case 0x4322:
	case 0x4328:
	return 7000;
	case 0x4325:
	/* TODO: */
	default:
	return 15000;
	}
	}

	/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
	static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
	{
	struct ssb_bus *bus = cc->dev->bus;
	int minfreq;
	unsigned int tmp;
	u32 pll_on_delay;

	if (bus->bustype != SSB_BUSTYPE_PCI)
	return;

	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
	cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
	return;
	}

	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
	return;

	minfreq = chipco_pctl_clockfreqlimit(cc, 0);
	pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
	tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
	SSB_WARN_ON(tmp & ~0xFFFF);

	cc->fast_pwrup_delay = tmp;
	}

	void ssb_chipcommon_init(struct ssb_chipcommon *cc)
	{
	if (!cc->dev)
	return; /* We don't have a ChipCommon */
	if (cc->dev->id.revision >= 11)
	cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
	ssb_pmu_init(cc);
	chipco_powercontrol_init(cc);
	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
	calc_fast_powerup_delay(cc);
	}

	void ssb_chipco_suspend(struct ssb_chipcommon *cc)
	{
	if (!cc->dev)
	return;
	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
	}

	void ssb_chipco_resume(struct ssb_chipcommon *cc)
	{
	if (!cc->dev)
	return;
	chipco_powercontrol_init(cc);
	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
	}

	/* Get the processor clock */
	void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
	u32 plltype, u32 n, u32 *m)
	{
	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
	switch (*plltype) {
	case SSB_PLLTYPE_2:
	case SSB_PLLTYPE_4:
	case SSB_PLLTYPE_6:
	case SSB_PLLTYPE_7:
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
	break;
	case SSB_PLLTYPE_3:
	/* 5350 uses m2 to control mips */
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
	break;
	default:
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
	break;
	}
	}

	/* Get the bus clock */
	void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
	u32 plltype, u32 n, u32 *m)
	{
	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
	switch (*plltype) {
	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
	break;
	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
	if (cc->dev->bus->chip_id != 0x5365) {
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
	break;
	}
	/* Fallthough */
	default:
	*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
	}
	}

	void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
	unsigned long ns)
	{
	struct ssb_device *dev = cc->dev;
	struct ssb_bus *bus = dev->bus;
	u32 tmp;

	/* set register for external IO to control LED. */
	chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
	tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
	tmp \|= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
	tmp \|= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */
	chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */

	/* Set timing for the flash */
	tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
	tmp \|= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
	tmp \|= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */
	if ((bus->chip_id == 0x5365) \|\|
	(dev->id.revision < 9))
	chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
	if ((bus->chip_id == 0x5365) \|\|
	(dev->id.revision < 9) \|\|
	((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
	chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);

	if (bus->chip_id == 0x5350) {
	/* Enable EXTIF */
	tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
	tmp \|= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
	tmp \|= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
	tmp \|= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */
	chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
	}
	}

	/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
	void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
	{
	/* instant NMI */
	chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
	}

	void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
	}

	u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
	{
	return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
	}

	u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
	{
	return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
	}

	u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
	}

	u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
	}

	u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
	}
	EXPORT_SYMBOL(ssb_chipco_gpio_control);

	u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
	}

	u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
	{
	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
	}

	#ifdef CONFIG_SSB_SERIAL
	int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
	struct ssb_serial_port *ports)
	{
	struct ssb_bus *bus = cc->dev->bus;
	int nr_ports = 0;
	u32 plltype;
	unsigned int irq;
	u32 baud_base, div;
	u32 i, n;
	unsigned int ccrev = cc->dev->id.revision;

	plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
	irq = ssb_mips_irq(cc->dev);

	if (plltype == SSB_PLLTYPE_1) {
	/* PLL clock */
	baud_base = ssb_calc_clock_rate(plltype,
	chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
	chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
	div = 1;
	} else {
	if (ccrev == 20) {
	/* BCM5354 uses constant 25MHz clock */
	baud_base = 25000000;
	div = 48;
	/* Set the override bit so we don't divide it */
	chipco_write32(cc, SSB_CHIPCO_CORECTL,
	chipco_read32(cc, SSB_CHIPCO_CORECTL)
	\| SSB_CHIPCO_CORECTL_UARTCLK0);
	} else if ((ccrev >= 11) && (ccrev != 15)) {
	/* Fixed ALP clock */
	baud_base = 20000000;
	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
	/* FIXME: baud_base is different for devices with a PMU */
	SSB_WARN_ON(1);
	}
	div = 1;
	if (ccrev >= 21) {
	/* Turn off UART clock before switching clocksource. */
	chipco_write32(cc, SSB_CHIPCO_CORECTL,
	chipco_read32(cc, SSB_CHIPCO_CORECTL)
	& ~SSB_CHIPCO_CORECTL_UARTCLKEN);
	}
	/* Set the override bit so we don't divide it */
	chipco_write32(cc, SSB_CHIPCO_CORECTL,
	chipco_read32(cc, SSB_CHIPCO_CORECTL)
	\| SSB_CHIPCO_CORECTL_UARTCLK0);
	if (ccrev >= 21) {
	/* Re-enable the UART clock. */
	chipco_write32(cc, SSB_CHIPCO_CORECTL,
	chipco_read32(cc, SSB_CHIPCO_CORECTL)
	\| SSB_CHIPCO_CORECTL_UARTCLKEN);
	}
	} else if (ccrev >= 3) {
	/* Internal backplane clock */
	baud_base = ssb_clockspeed(bus);
	div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
	& SSB_CHIPCO_CLKDIV_UART;
	} else {
	/* Fixed internal backplane clock */
	baud_base = 88000000;
	div = 48;
	}

	/* Clock source depends on strapping if UartClkOverride is unset */
	if ((ccrev > 0) &&
	!(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
	if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
	SSB_CHIPCO_CAP_UARTCLK_INT) {
	/* Internal divided backplane clock */
	baud_base /= div;
	} else {
	/* Assume external clock of 1.8432 MHz */
	baud_base = 1843200;
	}
	}
	}

	/* Determine the registers of the UARTs */
	n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
	for (i = 0; i < n; i++) {
	void __iomem *cc_mmio;
	void __iomem *uart_regs;

	cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
	uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
	/* Offset changed at after rev 0 */
	if (ccrev == 0)
	uart_regs += (i * 8);
	else
	uart_regs += (i * 256);

	nr_ports++;
	ports[i].regs = uart_regs;
	ports[i].irq = irq;
	ports[i].baud_base = baud_base;
	ports[i].reg_shift = 0;
	}

	return nr_ports;
	}
	#endif /* CONFIG_SSB_SERIAL */