|  | /* | 
|  | * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) | 
|  | * Radio Control command/event transport to the UWB stack | 
|  | * | 
|  | * Copyright (C) 2005-2006 Intel Corporation | 
|  | * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License version | 
|  | * 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
|  | * 02110-1301, USA. | 
|  | * | 
|  | * | 
|  | * Initialize and hook up the Radio Control interface. | 
|  | * | 
|  | * For each device probed, creates an 'struct whcrc' which contains | 
|  | * just the representation of the UWB Radio Controller, and the logic | 
|  | * for reading notifications and passing them to the UWB Core. | 
|  | * | 
|  | * So we initialize all of those, register the UWB Radio Controller | 
|  | * and setup the notification/event handle to pipe the notifications | 
|  | * to the UWB management Daemon. | 
|  | * | 
|  | * Once uwb_rc_add() is called, the UWB stack takes control, resets | 
|  | * the radio and readies the device to take commands the UWB | 
|  | * API/user-space. | 
|  | * | 
|  | * Note this driver is just a transport driver; the commands are | 
|  | * formed at the UWB stack and given to this driver who will deliver | 
|  | * them to the hw and transfer the replies/notifications back to the | 
|  | * UWB stack through the UWB daemon (UWBD). | 
|  | */ | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/uwb.h> | 
|  | #include <linux/uwb/whci.h> | 
|  | #include <linux/uwb/umc.h> | 
|  |  | 
|  | #include "uwb-internal.h" | 
|  |  | 
|  | /** | 
|  | * Descriptor for an instance of the UWB Radio Control Driver that | 
|  | * attaches to the URC interface of the WHCI PCI card. | 
|  | * | 
|  | * Unless there is a lock specific to the 'data members', all access | 
|  | * is protected by uwb_rc->mutex. | 
|  | */ | 
|  | struct whcrc { | 
|  | struct umc_dev *umc_dev; | 
|  | struct uwb_rc *uwb_rc;		/* UWB host controller */ | 
|  |  | 
|  | unsigned long area; | 
|  | void __iomem *rc_base; | 
|  | size_t rc_len; | 
|  | spinlock_t irq_lock; | 
|  |  | 
|  | void *evt_buf, *cmd_buf; | 
|  | dma_addr_t evt_dma_buf, cmd_dma_buf; | 
|  | wait_queue_head_t cmd_wq; | 
|  | struct work_struct event_work; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * Execute an UWB RC command on WHCI/RC | 
|  | * | 
|  | * @rc:       Instance of a Radio Controller that is a whcrc | 
|  | * @cmd:      Buffer containing the RCCB and payload to execute | 
|  | * @cmd_size: Size of the command buffer. | 
|  | * | 
|  | * We copy the command into whcrc->cmd_buf (as it is pretty and | 
|  | * aligned`and physically contiguous) and then press the right keys in | 
|  | * the controller's URCCMD register to get it to read it. We might | 
|  | * have to wait for the cmd_sem to be open to us. | 
|  | * | 
|  | * NOTE: rc's mutex has to be locked | 
|  | */ | 
|  | static int whcrc_cmd(struct uwb_rc *uwb_rc, | 
|  | const struct uwb_rccb *cmd, size_t cmd_size) | 
|  | { | 
|  | int result = 0; | 
|  | struct whcrc *whcrc = uwb_rc->priv; | 
|  | struct device *dev = &whcrc->umc_dev->dev; | 
|  | u32 urccmd; | 
|  |  | 
|  | if (cmd_size >= 4096) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * If the URC is halted, then the hardware has reset itself. | 
|  | * Attempt to recover by restarting the device and then return | 
|  | * an error as it's likely that the current command isn't | 
|  | * valid for a newly started RC. | 
|  | */ | 
|  | if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { | 
|  | dev_err(dev, "requesting reset of halted radio controller\n"); | 
|  | uwb_rc_reset_all(uwb_rc); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | result = wait_event_timeout(whcrc->cmd_wq, | 
|  | !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); | 
|  | if (result == 0) { | 
|  | dev_err(dev, "device is not ready to execute commands\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | memmove(whcrc->cmd_buf, cmd, cmd_size); | 
|  | le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); | 
|  |  | 
|  | spin_lock(&whcrc->irq_lock); | 
|  | urccmd = le_readl(whcrc->rc_base + URCCMD); | 
|  | urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); | 
|  | le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, | 
|  | whcrc->rc_base + URCCMD); | 
|  | spin_unlock(&whcrc->irq_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int whcrc_reset(struct uwb_rc *rc) | 
|  | { | 
|  | struct whcrc *whcrc = rc->priv; | 
|  |  | 
|  | return umc_controller_reset(whcrc->umc_dev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Reset event reception mechanism and tell hw we are ready to get more | 
|  | * | 
|  | * We have read all the events in the event buffer, so we are ready to | 
|  | * reset it to the beginning. | 
|  | * | 
|  | * This is only called during initialization or after an event buffer | 
|  | * has been retired.  This means we can be sure that event processing | 
|  | * is disabled and it's safe to update the URCEVTADDR register. | 
|  | * | 
|  | * There's no need to wait for the event processing to start as the | 
|  | * URC will not clear URCCMD_ACTIVE until (internal) event buffer | 
|  | * space is available. | 
|  | */ | 
|  | static | 
|  | void whcrc_enable_events(struct whcrc *whcrc) | 
|  | { | 
|  | u32 urccmd; | 
|  |  | 
|  | le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); | 
|  |  | 
|  | spin_lock(&whcrc->irq_lock); | 
|  | urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; | 
|  | le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); | 
|  | spin_unlock(&whcrc->irq_lock); | 
|  | } | 
|  |  | 
|  | static void whcrc_event_work(struct work_struct *work) | 
|  | { | 
|  | struct whcrc *whcrc = container_of(work, struct whcrc, event_work); | 
|  | size_t size; | 
|  | u64 urcevtaddr; | 
|  |  | 
|  | urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); | 
|  | size = urcevtaddr & URCEVTADDR_OFFSET_MASK; | 
|  |  | 
|  | uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); | 
|  | whcrc_enable_events(whcrc); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Catch interrupts? | 
|  | * | 
|  | * We ack inmediately (and expect the hw to do the right thing and | 
|  | * raise another IRQ if things have changed :) | 
|  | */ | 
|  | static | 
|  | irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) | 
|  | { | 
|  | struct whcrc *whcrc = _whcrc; | 
|  | struct device *dev = &whcrc->umc_dev->dev; | 
|  | u32 urcsts; | 
|  |  | 
|  | urcsts = le_readl(whcrc->rc_base + URCSTS); | 
|  | if (!(urcsts & URCSTS_INT_MASK)) | 
|  | return IRQ_NONE; | 
|  | le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); | 
|  |  | 
|  | if (urcsts & URCSTS_HSE) { | 
|  | dev_err(dev, "host system error -- hardware halted\n"); | 
|  | /* FIXME: do something sensible here */ | 
|  | goto out; | 
|  | } | 
|  | if (urcsts & URCSTS_ER) | 
|  | schedule_work(&whcrc->event_work); | 
|  | if (urcsts & URCSTS_RCI) | 
|  | wake_up_all(&whcrc->cmd_wq); | 
|  | out: | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Initialize a UMC RC interface: map regions, get (shared) IRQ | 
|  | */ | 
|  | static | 
|  | int whcrc_setup_rc_umc(struct whcrc *whcrc) | 
|  | { | 
|  | int result = 0; | 
|  | struct device *dev = &whcrc->umc_dev->dev; | 
|  | struct umc_dev *umc_dev = whcrc->umc_dev; | 
|  |  | 
|  | whcrc->area = umc_dev->resource.start; | 
|  | whcrc->rc_len = umc_dev->resource.end - umc_dev->resource.start + 1; | 
|  | result = -EBUSY; | 
|  | if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) { | 
|  | dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", | 
|  | whcrc->rc_len, whcrc->area, result); | 
|  | goto error_request_region; | 
|  | } | 
|  |  | 
|  | whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len); | 
|  | if (whcrc->rc_base == NULL) { | 
|  | dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", | 
|  | whcrc->rc_len, whcrc->area, result); | 
|  | goto error_ioremap_nocache; | 
|  | } | 
|  |  | 
|  | result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, | 
|  | KBUILD_MODNAME, whcrc); | 
|  | if (result < 0) { | 
|  | dev_err(dev, "can't allocate IRQ %d: %d\n", | 
|  | umc_dev->irq, result); | 
|  | goto error_request_irq; | 
|  | } | 
|  |  | 
|  | result = -ENOMEM; | 
|  | whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | 
|  | &whcrc->cmd_dma_buf, GFP_KERNEL); | 
|  | if (whcrc->cmd_buf == NULL) { | 
|  | dev_err(dev, "Can't allocate cmd transfer buffer\n"); | 
|  | goto error_cmd_buffer; | 
|  | } | 
|  |  | 
|  | whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | 
|  | &whcrc->evt_dma_buf, GFP_KERNEL); | 
|  | if (whcrc->evt_buf == NULL) { | 
|  | dev_err(dev, "Can't allocate evt transfer buffer\n"); | 
|  | goto error_evt_buffer; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | error_evt_buffer: | 
|  | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | 
|  | whcrc->cmd_dma_buf); | 
|  | error_cmd_buffer: | 
|  | free_irq(umc_dev->irq, whcrc); | 
|  | error_request_irq: | 
|  | iounmap(whcrc->rc_base); | 
|  | error_ioremap_nocache: | 
|  | release_mem_region(whcrc->area, whcrc->rc_len); | 
|  | error_request_region: | 
|  | return result; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Release RC's UMC resources | 
|  | */ | 
|  | static | 
|  | void whcrc_release_rc_umc(struct whcrc *whcrc) | 
|  | { | 
|  | struct umc_dev *umc_dev = whcrc->umc_dev; | 
|  |  | 
|  | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, | 
|  | whcrc->evt_dma_buf); | 
|  | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | 
|  | whcrc->cmd_dma_buf); | 
|  | free_irq(umc_dev->irq, whcrc); | 
|  | iounmap(whcrc->rc_base); | 
|  | release_mem_region(whcrc->area, whcrc->rc_len); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * whcrc_start_rc - start a WHCI radio controller | 
|  | * @whcrc: the radio controller to start | 
|  | * | 
|  | * Reset the UMC device, start the radio controller, enable events and | 
|  | * finally enable interrupts. | 
|  | */ | 
|  | static int whcrc_start_rc(struct uwb_rc *rc) | 
|  | { | 
|  | struct whcrc *whcrc = rc->priv; | 
|  | struct device *dev = &whcrc->umc_dev->dev; | 
|  |  | 
|  | /* Reset the thing */ | 
|  | le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); | 
|  | if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, | 
|  | 5000, "hardware reset") < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* Set the event buffer, start the controller (enable IRQs later) */ | 
|  | le_writel(0, whcrc->rc_base + URCINTR); | 
|  | le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); | 
|  | if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, | 
|  | 5000, "radio controller start") < 0) | 
|  | return -ETIMEDOUT; | 
|  | whcrc_enable_events(whcrc); | 
|  | le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * whcrc_stop_rc - stop a WHCI radio controller | 
|  | * @whcrc: the radio controller to stop | 
|  | * | 
|  | * Disable interrupts and cancel any pending event processing work | 
|  | * before clearing the Run/Stop bit. | 
|  | */ | 
|  | static | 
|  | void whcrc_stop_rc(struct uwb_rc *rc) | 
|  | { | 
|  | struct whcrc *whcrc = rc->priv; | 
|  | struct umc_dev *umc_dev = whcrc->umc_dev; | 
|  |  | 
|  | le_writel(0, whcrc->rc_base + URCINTR); | 
|  | cancel_work_sync(&whcrc->event_work); | 
|  |  | 
|  | le_writel(0, whcrc->rc_base + URCCMD); | 
|  | whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, | 
|  | URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop"); | 
|  | } | 
|  |  | 
|  | static void whcrc_init(struct whcrc *whcrc) | 
|  | { | 
|  | spin_lock_init(&whcrc->irq_lock); | 
|  | init_waitqueue_head(&whcrc->cmd_wq); | 
|  | INIT_WORK(&whcrc->event_work, whcrc_event_work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Initialize the radio controller. | 
|  | * | 
|  | * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the | 
|  | *       IRQ handler we use that to determine if the hw is ready to | 
|  | *       handle events. Looks like a race condition, but it really is | 
|  | *       not. | 
|  | */ | 
|  | static | 
|  | int whcrc_probe(struct umc_dev *umc_dev) | 
|  | { | 
|  | int result; | 
|  | struct uwb_rc *uwb_rc; | 
|  | struct whcrc *whcrc; | 
|  | struct device *dev = &umc_dev->dev; | 
|  |  | 
|  | result = -ENOMEM; | 
|  | uwb_rc = uwb_rc_alloc(); | 
|  | if (uwb_rc == NULL) { | 
|  | dev_err(dev, "unable to allocate RC instance\n"); | 
|  | goto error_rc_alloc; | 
|  | } | 
|  | whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); | 
|  | if (whcrc == NULL) { | 
|  | dev_err(dev, "unable to allocate WHC-RC instance\n"); | 
|  | goto error_alloc; | 
|  | } | 
|  | whcrc_init(whcrc); | 
|  | whcrc->umc_dev = umc_dev; | 
|  |  | 
|  | result = whcrc_setup_rc_umc(whcrc); | 
|  | if (result < 0) { | 
|  | dev_err(dev, "Can't setup RC UMC interface: %d\n", result); | 
|  | goto error_setup_rc_umc; | 
|  | } | 
|  | whcrc->uwb_rc = uwb_rc; | 
|  |  | 
|  | uwb_rc->owner = THIS_MODULE; | 
|  | uwb_rc->cmd   = whcrc_cmd; | 
|  | uwb_rc->reset = whcrc_reset; | 
|  | uwb_rc->start = whcrc_start_rc; | 
|  | uwb_rc->stop  = whcrc_stop_rc; | 
|  |  | 
|  | result = uwb_rc_add(uwb_rc, dev, whcrc); | 
|  | if (result < 0) | 
|  | goto error_rc_add; | 
|  | umc_set_drvdata(umc_dev, whcrc); | 
|  | return 0; | 
|  |  | 
|  | error_rc_add: | 
|  | whcrc_release_rc_umc(whcrc); | 
|  | error_setup_rc_umc: | 
|  | kfree(whcrc); | 
|  | error_alloc: | 
|  | uwb_rc_put(uwb_rc); | 
|  | error_rc_alloc: | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Clean up the radio control resources | 
|  | * | 
|  | * When we up the command semaphore, everybody possibly held trying to | 
|  | * execute a command should be granted entry and then they'll see the | 
|  | * host is quiescing and up it (so it will chain to the next waiter). | 
|  | * This should not happen (in any case), as we can only remove when | 
|  | * there are no handles open... | 
|  | */ | 
|  | static void whcrc_remove(struct umc_dev *umc_dev) | 
|  | { | 
|  | struct whcrc *whcrc = umc_get_drvdata(umc_dev); | 
|  | struct uwb_rc *uwb_rc = whcrc->uwb_rc; | 
|  |  | 
|  | umc_set_drvdata(umc_dev, NULL); | 
|  | uwb_rc_rm(uwb_rc); | 
|  | whcrc_release_rc_umc(whcrc); | 
|  | kfree(whcrc); | 
|  | uwb_rc_put(uwb_rc); | 
|  | } | 
|  |  | 
|  | static int whcrc_pre_reset(struct umc_dev *umc) | 
|  | { | 
|  | struct whcrc *whcrc = umc_get_drvdata(umc); | 
|  | struct uwb_rc *uwb_rc = whcrc->uwb_rc; | 
|  |  | 
|  | uwb_rc_pre_reset(uwb_rc); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int whcrc_post_reset(struct umc_dev *umc) | 
|  | { | 
|  | struct whcrc *whcrc = umc_get_drvdata(umc); | 
|  | struct uwb_rc *uwb_rc = whcrc->uwb_rc; | 
|  |  | 
|  | return uwb_rc_post_reset(uwb_rc); | 
|  | } | 
|  |  | 
|  | /* PCI device ID's that we handle [so it gets loaded] */ | 
|  | static struct pci_device_id whcrc_id_table[] = { | 
|  | { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, | 
|  | { /* empty last entry */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, whcrc_id_table); | 
|  |  | 
|  | static struct umc_driver whcrc_driver = { | 
|  | .name       = "whc-rc", | 
|  | .cap_id     = UMC_CAP_ID_WHCI_RC, | 
|  | .probe      = whcrc_probe, | 
|  | .remove     = whcrc_remove, | 
|  | .pre_reset  = whcrc_pre_reset, | 
|  | .post_reset = whcrc_post_reset, | 
|  | }; | 
|  |  | 
|  | static int __init whcrc_driver_init(void) | 
|  | { | 
|  | return umc_driver_register(&whcrc_driver); | 
|  | } | 
|  | module_init(whcrc_driver_init); | 
|  |  | 
|  | static void __exit whcrc_driver_exit(void) | 
|  | { | 
|  | umc_driver_unregister(&whcrc_driver); | 
|  | } | 
|  | module_exit(whcrc_driver_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); | 
|  | MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); | 
|  | MODULE_LICENSE("GPL"); |