|  | /* | 
|  | * linux/arch/arm/mach-omap1/irq.c | 
|  | * | 
|  | * Interrupt handler for all OMAP boards | 
|  | * | 
|  | * Copyright (C) 2004 Nokia Corporation | 
|  | * Written by Tony Lindgren <tony@atomide.com> | 
|  | * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> | 
|  | * | 
|  | * Completely re-written to support various OMAP chips with bank specific | 
|  | * interrupt handlers. | 
|  | * | 
|  | * Some snippets of the code taken from the older OMAP interrupt handler | 
|  | * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> | 
|  | * | 
|  | * GPIO interrupt handler moved to gpio.c by Juha Yrjola | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the | 
|  | * Free Software Foundation; either version 2 of the License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
|  | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | 
|  | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | 
|  | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | 
|  | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
|  | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | * You should have received a copy of the  GNU General Public License along | 
|  | * with this program; if not, write  to the Free Software Foundation, Inc., | 
|  | * 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/mach/irq.h> | 
|  | #include <mach/gpio.h> | 
|  | #include <plat/cpu.h> | 
|  |  | 
|  | #define IRQ_BANK(irq) ((irq) >> 5) | 
|  | #define IRQ_BIT(irq)  ((irq) & 0x1f) | 
|  |  | 
|  | struct omap_irq_bank { | 
|  | unsigned long base_reg; | 
|  | unsigned long trigger_map; | 
|  | unsigned long wake_enable; | 
|  | }; | 
|  |  | 
|  | static unsigned int irq_bank_count; | 
|  | static struct omap_irq_bank *irq_banks; | 
|  |  | 
|  | static inline unsigned int irq_bank_readl(int bank, int offset) | 
|  | { | 
|  | return omap_readl(irq_banks[bank].base_reg + offset); | 
|  | } | 
|  |  | 
|  | static inline void irq_bank_writel(unsigned long value, int bank, int offset) | 
|  | { | 
|  | omap_writel(value, irq_banks[bank].base_reg + offset); | 
|  | } | 
|  |  | 
|  | static void omap_ack_irq(unsigned int irq) | 
|  | { | 
|  | if (irq > 31) | 
|  | omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); | 
|  |  | 
|  | omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | static void omap_mask_irq(unsigned int irq) | 
|  | { | 
|  | int bank = IRQ_BANK(irq); | 
|  | u32 l; | 
|  |  | 
|  | l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); | 
|  | l |= 1 << IRQ_BIT(irq); | 
|  | omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | static void omap_unmask_irq(unsigned int irq) | 
|  | { | 
|  | int bank = IRQ_BANK(irq); | 
|  | u32 l; | 
|  |  | 
|  | l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); | 
|  | l &= ~(1 << IRQ_BIT(irq)); | 
|  | omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | static void omap_mask_ack_irq(unsigned int irq) | 
|  | { | 
|  | omap_mask_irq(irq); | 
|  | omap_ack_irq(irq); | 
|  | } | 
|  |  | 
|  | static int omap_wake_irq(unsigned int irq, unsigned int enable) | 
|  | { | 
|  | int bank = IRQ_BANK(irq); | 
|  |  | 
|  | if (enable) | 
|  | irq_banks[bank].wake_enable |= IRQ_BIT(irq); | 
|  | else | 
|  | irq_banks[bank].wake_enable &= ~IRQ_BIT(irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Allows tuning the IRQ type and priority | 
|  | * | 
|  | * NOTE: There is currently no OMAP fiq handler for Linux. Read the | 
|  | *	 mailing list threads on FIQ handlers if you are planning to | 
|  | *	 add a FIQ handler for OMAP. | 
|  | */ | 
|  | static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) | 
|  | { | 
|  | signed int bank; | 
|  | unsigned long val, offset; | 
|  |  | 
|  | bank = IRQ_BANK(irq); | 
|  | /* FIQ is only available on bank 0 interrupts */ | 
|  | fiq = bank ? 0 : (fiq & 0x1); | 
|  | val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); | 
|  | offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4; | 
|  | irq_bank_writel(val, bank, offset); | 
|  | } | 
|  |  | 
|  | #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) | 
|  | static struct omap_irq_bank omap7xx_irq_banks[] = { | 
|  | { .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f }, | 
|  | { .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 }, | 
|  | { .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 }, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ARCH_OMAP15XX | 
|  | static struct omap_irq_bank omap1510_irq_banks[] = { | 
|  | { .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff }, | 
|  | { .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xffbfffed }, | 
|  | }; | 
|  | static struct omap_irq_bank omap310_irq_banks[] = { | 
|  | { .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3faefc3 }, | 
|  | { .base_reg = OMAP_IH2_BASE,		.trigger_map = 0x65b3c061 }, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_ARCH_OMAP16XX) | 
|  |  | 
|  | static struct omap_irq_bank omap1610_irq_banks[] = { | 
|  | { .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3fefe8f }, | 
|  | { .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb7c1fd }, | 
|  | { .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xffffb7ff }, | 
|  | { .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff }, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct irq_chip omap_irq_chip = { | 
|  | .name		= "MPU", | 
|  | .ack		= omap_mask_ack_irq, | 
|  | .mask		= omap_mask_irq, | 
|  | .unmask		= omap_unmask_irq, | 
|  | .set_wake	= omap_wake_irq, | 
|  | }; | 
|  |  | 
|  | void __init omap_init_irq(void) | 
|  | { | 
|  | int i, j; | 
|  |  | 
|  | #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) | 
|  | if (cpu_is_omap7xx()) { | 
|  | irq_banks = omap7xx_irq_banks; | 
|  | irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); | 
|  | } | 
|  | #endif | 
|  | #ifdef CONFIG_ARCH_OMAP15XX | 
|  | if (cpu_is_omap1510()) { | 
|  | irq_banks = omap1510_irq_banks; | 
|  | irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); | 
|  | } | 
|  | if (cpu_is_omap310()) { | 
|  | irq_banks = omap310_irq_banks; | 
|  | irq_bank_count = ARRAY_SIZE(omap310_irq_banks); | 
|  | } | 
|  | #endif | 
|  | #if defined(CONFIG_ARCH_OMAP16XX) | 
|  | if (cpu_is_omap16xx()) { | 
|  | irq_banks = omap1610_irq_banks; | 
|  | irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); | 
|  | } | 
|  | #endif | 
|  | printk("Total of %i interrupts in %i interrupt banks\n", | 
|  | irq_bank_count * 32, irq_bank_count); | 
|  |  | 
|  | /* Mask and clear all interrupts */ | 
|  | for (i = 0; i < irq_bank_count; i++) { | 
|  | irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET); | 
|  | irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | /* Clear any pending interrupts */ | 
|  | irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); | 
|  | irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); | 
|  |  | 
|  | /* Enable interrupts in global mask */ | 
|  | if (cpu_is_omap7xx()) | 
|  | irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); | 
|  |  | 
|  | /* Install the interrupt handlers for each bank */ | 
|  | for (i = 0; i < irq_bank_count; i++) { | 
|  | for (j = i * 32; j < (i + 1) * 32; j++) { | 
|  | int irq_trigger; | 
|  |  | 
|  | irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); | 
|  | omap_irq_set_cfg(j, 0, 0, irq_trigger); | 
|  |  | 
|  | set_irq_chip(j, &omap_irq_chip); | 
|  | set_irq_handler(j, handle_level_irq); | 
|  | set_irq_flags(j, IRQF_VALID); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Unmask level 2 handler */ | 
|  |  | 
|  | if (cpu_is_omap7xx()) | 
|  | omap_unmask_irq(INT_7XX_IH2_IRQ); | 
|  | else if (cpu_is_omap15xx()) | 
|  | omap_unmask_irq(INT_1510_IH2_IRQ); | 
|  | else if (cpu_is_omap16xx()) | 
|  | omap_unmask_irq(INT_1610_IH2_IRQ); | 
|  | } |