V4L/DVB (11216): Add driver for Intel CE6230 DVB-T USB2.0
Add driver for Intel CE6230 DVB-T USB 2.0 COFDM demodulator
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/ce6230.h b/drivers/media/dvb/dvb-usb/ce6230.h
new file mode 100644
index 0000000..97c4248
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ce6230.h
@@ -0,0 +1,69 @@
+/*
+ * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _DVB_USB_CE6230_H_
+#define _DVB_USB_CE6230_H_
+
+#define DVB_USB_LOG_PREFIX "ce6230"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_ce6230_debug, 0x01, args)
+#define deb_rc(args...) dprintk(dvb_usb_ce6230_debug, 0x02, args)
+#define deb_xfer(args...) dprintk(dvb_usb_ce6230_debug, 0x04, args)
+#define deb_reg(args...) dprintk(dvb_usb_ce6230_debug, 0x08, args)
+#define deb_i2c(args...) dprintk(dvb_usb_ce6230_debug, 0x10, args)
+#define deb_fw(args...) dprintk(dvb_usb_ce6230_debug, 0x20, args)
+
+#define ce6230_debug_dump(r, t, v, i, b, l, func) { \
+ int loop_; \
+ func("%02x %02x %02x %02x %02x %02x %02x %02x", \
+ t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
+ if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+ func(" >>> "); \
+ else \
+ func(" <<< "); \
+ for (loop_ = 0; loop_ < l; loop_++) \
+ func("%02x ", b[loop_]); \
+ func("\n");\
+}
+
+#define CE6230_USB_TIMEOUT 1000
+
+struct req_t {
+ u8 cmd; /* [1] */
+ u16 value; /* [2|3] */
+ u16 index; /* [4|5] */
+ u16 data_len; /* [6|7] */
+ u8 *data;
+};
+
+enum ce6230_cmd {
+ CONFIG_READ = 0xd0, /* rd 0 (unclear) */
+ UNKNOWN_WRITE = 0xc7, /* wr 7 (unclear) */
+ I2C_READ = 0xd9, /* rd 9 (unclear) */
+ I2C_WRITE = 0xca, /* wr a */
+ DEMOD_READ = 0xdb, /* rd b */
+ DEMOD_WRITE = 0xcc, /* wr c */
+ REG_READ = 0xde, /* rd e */
+ REG_WRITE = 0xcf, /* wr f */
+};
+
+#endif