msm: board-8960: Create a separate board file for PMIC devices
Move the MSM8960 PMIC devices, associated devices, and
initialization code into a dedicated board file.
Change-Id: I74f29ae6f4eaed0a83b3622276f79477120748b4
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index cb4f436..6a87abd 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -223,14 +223,14 @@
obj-$(CONFIG_ARCH_MSM8960) += acpuclock-8960.o
obj-$(CONFIG_ARCH_MSM8960) += memory_topology.o
obj-$(CONFIG_ARCH_MSM8960) += saw-regulator.o rpm-regulator.o rpm-regulator-8960.o
-obj-$(CONFIG_MACH_MSM8960_SIM) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8960_RUMI3) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8960_CDP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8960_MTP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8960_FLUID) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8930_CDP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8930_MTP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
-obj-$(CONFIG_MACH_MSM8930_FLUID) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8960_SIM) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8960_RUMI3) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8960_CDP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8960_MTP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8960_FLUID) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8930_CDP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8930_MTP) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
+obj-$(CONFIG_MACH_MSM8930_FLUID) += board-msm8960.o board-msm8960-camera.o board-msm8960-display.o board-msm8960-pmic.o devices-8960.o board-msm8960-regulator.o
obj-$(CONFIG_ARCH_MSM8960) += bms-batterydata.o
obj-$(CONFIG_ARCH_APQ8064) += board-apq8064.o devices-8064.o board-apq8064-regulator.o
obj-$(CONFIG_ARCH_MSM9615) += board-9615.o devices-9615.o board-9615-regulator.o
diff --git a/arch/arm/mach-msm/board-msm8960-pmic.c b/arch/arm/mach-msm/board-msm8960-pmic.c
new file mode 100644
index 0000000..99682c3
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8960-pmic.c
@@ -0,0 +1,542 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/pm8xxx/pm8921.h>
+#include <linux/mfd/pm8xxx/pm8xxx-adc.h>
+#include <linux/leds.h>
+#include <linux/leds-pm8xxx.h>
+#include <linux/msm_ssbi.h>
+#include <asm/mach-types.h>
+#include <mach/msm_bus_board.h>
+#include <mach/restart.h>
+#include "devices.h"
+#include "board-msm8960.h"
+
+struct pm8xxx_gpio_init {
+ unsigned gpio;
+ struct pm_gpio config;
+};
+
+struct pm8xxx_mpp_init {
+ unsigned mpp;
+ struct pm8xxx_mpp_config_data config;
+};
+
+#define PM8XXX_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \
+ _func, _inv, _disable) \
+{ \
+ .gpio = PM8921_GPIO_PM_TO_SYS(_gpio), \
+ .config = { \
+ .direction = _dir, \
+ .output_buffer = _buf, \
+ .output_value = _val, \
+ .pull = _pull, \
+ .vin_sel = _vin, \
+ .out_strength = _out_strength, \
+ .function = _func, \
+ .inv_int_pol = _inv, \
+ .disable_pin = _disable, \
+ } \
+}
+
+#define PM8XXX_MPP_INIT(_mpp, _type, _level, _control) \
+{ \
+ .mpp = PM8921_MPP_PM_TO_SYS(_mpp), \
+ .config = { \
+ .type = PM8XXX_MPP_TYPE_##_type, \
+ .level = _level, \
+ .control = PM8XXX_MPP_##_control, \
+ } \
+}
+
+#define PM8XXX_GPIO_DISABLE(_gpio) \
+ PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM_GPIO_VIN_S4, \
+ 0, 0, 0, 1)
+
+#define PM8XXX_GPIO_OUTPUT(_gpio, _val) \
+ PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_HIGH, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+#define PM8XXX_GPIO_INPUT(_gpio, _pull) \
+ PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \
+ _pull, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_NO, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+#define PM8XXX_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \
+ PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_HIGH, \
+ _func, 0, 0)
+
+#define PM8XXX_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \
+ PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, _vin, \
+ PM_GPIO_STRENGTH_HIGH, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+/* Initial PM8921 GPIO configurations */
+static struct pm8xxx_gpio_init pm8921_gpios[] __initdata = {
+ PM8XXX_GPIO_DISABLE(6), /* Disable unused */
+ PM8XXX_GPIO_DISABLE(7), /* Disable NFC */
+ PM8XXX_GPIO_INPUT(16, PM_GPIO_PULL_UP_30), /* SD_CARD_WP */
+ /* External regulator shared by display and touchscreen on LiQUID */
+ PM8XXX_GPIO_OUTPUT(17, 0), /* DISP 3.3 V Boost */
+ PM8XXX_GPIO_OUTPUT_VIN(21, 1, PM_GPIO_VIN_VPH), /* Backlight Enable */
+ PM8XXX_GPIO_DISABLE(22), /* Disable NFC */
+ PM8XXX_GPIO_OUTPUT_FUNC(24, 0, PM_GPIO_FUNC_2), /* Bl: Off, PWM mode */
+ PM8XXX_GPIO_INPUT(26, PM_GPIO_PULL_UP_30), /* SD_CARD_DET_N */
+ PM8XXX_GPIO_OUTPUT(43, PM_GPIO_PULL_UP_30), /* DISP_RESET_N */
+ PM8XXX_GPIO_OUTPUT(42, 0), /* USB 5V reg enable */
+};
+
+/* Initial PM8921 MPP configurations */
+static struct pm8xxx_mpp_init pm8921_mpps[] __initdata = {
+ /* External 5V regulator enable; shared by HDMI and USB_OTG switches. */
+ PM8XXX_MPP_INIT(7, D_INPUT, PM8921_MPP_DIG_LEVEL_VPH, DIN_TO_INT),
+ PM8XXX_MPP_INIT(PM8XXX_AMUX_MPP_8, A_INPUT, PM8XXX_MPP_AIN_AMUX_CH8,
+ DOUT_CTRL_LOW),
+};
+
+void __init msm8960_pm8921_gpio_mpp_init(void)
+{
+ int i, rc;
+
+ for (i = 0; i < ARRAY_SIZE(pm8921_gpios); i++) {
+ rc = pm8xxx_gpio_config(pm8921_gpios[i].gpio,
+ &pm8921_gpios[i].config);
+ if (rc) {
+ pr_err("%s: pm8xxx_gpio_config: rc=%d\n", __func__, rc);
+ break;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pm8921_mpps); i++) {
+ rc = pm8xxx_mpp_config(pm8921_mpps[i].mpp,
+ &pm8921_mpps[i].config);
+ if (rc) {
+ pr_err("%s: pm8xxx_mpp_config: rc=%d\n", __func__, rc);
+ break;
+ }
+ }
+}
+
+static struct pm8xxx_adc_amux pm8xxx_adc_channels_data[] = {
+ {"vcoin", CHANNEL_VCOIN, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"vbat", CHANNEL_VBAT, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"dcin", CHANNEL_DCIN, CHAN_PATH_SCALING4, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"ichg", CHANNEL_ICHG, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"vph_pwr", CHANNEL_VPH_PWR, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"ibat", CHANNEL_IBAT, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"batt_therm", CHANNEL_BATT_THERM, CHAN_PATH_SCALING1, AMUX_RSV2,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_BATT_THERM},
+ {"batt_id", CHANNEL_BATT_ID, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"usbin", CHANNEL_USBIN, CHAN_PATH_SCALING3, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"pmic_therm", CHANNEL_DIE_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_PMIC_THERM},
+ {"625mv", CHANNEL_625MV, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"125v", CHANNEL_125V, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"chg_temp", CHANNEL_CHG_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"pa_therm1", ADC_MPP_1_AMUX8, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
+ {"xo_therm", CHANNEL_MUXOFF, CHAN_PATH_SCALING1, AMUX_RSV0,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_XOTHERM},
+ {"pa_therm0", ADC_MPP_1_AMUX3, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
+};
+
+static struct pm8xxx_adc_properties pm8xxx_adc_data = {
+ .adc_vdd_reference = 1800, /* milli-voltage for this adc */
+ .bitresolution = 15,
+ .bipolar = 0,
+};
+
+static struct pm8xxx_adc_platform_data pm8xxx_adc_pdata = {
+ .adc_channel = pm8xxx_adc_channels_data,
+ .adc_num_board_channel = ARRAY_SIZE(pm8xxx_adc_channels_data),
+ .adc_prop = &pm8xxx_adc_data,
+ .adc_mpp_base = PM8921_MPP_PM_TO_SYS(1),
+};
+
+static struct pm8xxx_irq_platform_data pm8xxx_irq_pdata __devinitdata = {
+ .irq_base = PM8921_IRQ_BASE,
+ .devirq = MSM_GPIO_TO_INT(104),
+ .irq_trigger_flag = IRQF_TRIGGER_LOW,
+};
+
+static struct pm8xxx_gpio_platform_data pm8xxx_gpio_pdata __devinitdata = {
+ .gpio_base = PM8921_GPIO_PM_TO_SYS(1),
+};
+
+static struct pm8xxx_mpp_platform_data pm8xxx_mpp_pdata __devinitdata = {
+ .mpp_base = PM8921_MPP_PM_TO_SYS(1),
+};
+
+static struct pm8xxx_rtc_platform_data pm8xxx_rtc_pdata __devinitdata = {
+ .rtc_write_enable = false,
+ .rtc_alarm_powerup = false,
+};
+
+static struct pm8xxx_pwrkey_platform_data pm8xxx_pwrkey_pdata = {
+ .pull_up = 1,
+ .kpd_trigger_delay_us = 970,
+ .wakeup = 1,
+};
+
+/* Rotate lock key is not available so use F1 */
+#define KEY_ROTATE_LOCK KEY_F1
+
+static const unsigned int keymap_liquid[] = {
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_VOLUMEDOWN),
+ KEY(1, 3, KEY_ROTATE_LOCK),
+ KEY(1, 4, KEY_HOME),
+};
+
+static struct matrix_keymap_data keymap_data_liquid = {
+ .keymap_size = ARRAY_SIZE(keymap_liquid),
+ .keymap = keymap_liquid,
+};
+
+static struct pm8xxx_keypad_platform_data keypad_data_liquid = {
+ .input_name = "keypad_8960_liquid",
+ .input_phys_device = "keypad_8960/input0",
+ .num_rows = 2,
+ .num_cols = 5,
+ .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
+ .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
+ .debounce_ms = 15,
+ .scan_delay_ms = 32,
+ .row_hold_ns = 91500,
+ .wakeup = 1,
+ .keymap_data = &keymap_data_liquid,
+};
+
+
+static const unsigned int keymap[] = {
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_VOLUMEDOWN),
+ KEY(0, 2, KEY_CAMERA_SNAPSHOT),
+ KEY(0, 3, KEY_CAMERA_FOCUS),
+};
+
+static struct matrix_keymap_data keymap_data = {
+ .keymap_size = ARRAY_SIZE(keymap),
+ .keymap = keymap,
+};
+
+static struct pm8xxx_keypad_platform_data keypad_data = {
+ .input_name = "keypad_8960",
+ .input_phys_device = "keypad_8960/input0",
+ .num_rows = 1,
+ .num_cols = 5,
+ .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
+ .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
+ .debounce_ms = 15,
+ .scan_delay_ms = 32,
+ .row_hold_ns = 91500,
+ .wakeup = 1,
+ .keymap_data = &keymap_data,
+};
+
+static const unsigned int keymap_sim[] = {
+ KEY(0, 0, KEY_7),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_UP),
+ KEY(0, 3, KEY_RIGHT),
+ KEY(0, 4, KEY_ENTER),
+ KEY(0, 5, KEY_L),
+ KEY(0, 6, KEY_BACK),
+ KEY(0, 7, KEY_M),
+
+ KEY(1, 0, KEY_LEFT),
+ KEY(1, 1, KEY_SEND),
+ KEY(1, 2, KEY_1),
+ KEY(1, 3, KEY_4),
+ KEY(1, 4, KEY_CLEAR),
+ KEY(1, 5, KEY_MSDOS),
+ KEY(1, 6, KEY_SPACE),
+ KEY(1, 7, KEY_COMMA),
+
+ KEY(2, 0, KEY_6),
+ KEY(2, 1, KEY_5),
+ KEY(2, 2, KEY_8),
+ KEY(2, 3, KEY_3),
+ KEY(2, 4, KEY_NUMERIC_STAR),
+ KEY(2, 5, KEY_UP),
+ KEY(2, 6, KEY_DOWN),
+ KEY(2, 7, KEY_LEFTSHIFT),
+
+ KEY(3, 0, KEY_9),
+ KEY(3, 1, KEY_NUMERIC_POUND),
+ KEY(3, 2, KEY_0),
+ KEY(3, 3, KEY_2),
+ KEY(3, 4, KEY_SLEEP),
+ KEY(3, 5, KEY_F1),
+ KEY(3, 6, KEY_F2),
+ KEY(3, 7, KEY_F3),
+
+ KEY(4, 0, KEY_BACK),
+ KEY(4, 1, KEY_HOME),
+ KEY(4, 2, KEY_MENU),
+ KEY(4, 3, KEY_VOLUMEUP),
+ KEY(4, 4, KEY_VOLUMEDOWN),
+ KEY(4, 5, KEY_F4),
+ KEY(4, 6, KEY_F5),
+ KEY(4, 7, KEY_F6),
+
+ KEY(5, 0, KEY_R),
+ KEY(5, 1, KEY_T),
+ KEY(5, 2, KEY_Y),
+ KEY(5, 3, KEY_LEFTALT),
+ KEY(5, 4, KEY_KPENTER),
+ KEY(5, 5, KEY_Q),
+ KEY(5, 6, KEY_W),
+ KEY(5, 7, KEY_E),
+
+ KEY(6, 0, KEY_F),
+ KEY(6, 1, KEY_G),
+ KEY(6, 2, KEY_H),
+ KEY(6, 3, KEY_CAPSLOCK),
+ KEY(6, 4, KEY_PAGEUP),
+ KEY(6, 5, KEY_A),
+ KEY(6, 6, KEY_S),
+ KEY(6, 7, KEY_D),
+
+ KEY(7, 0, KEY_V),
+ KEY(7, 1, KEY_B),
+ KEY(7, 2, KEY_N),
+ KEY(7, 3, KEY_MENU),
+ KEY(7, 4, KEY_PAGEDOWN),
+ KEY(7, 5, KEY_Z),
+ KEY(7, 6, KEY_X),
+ KEY(7, 7, KEY_C),
+
+ KEY(8, 0, KEY_P),
+ KEY(8, 1, KEY_J),
+ KEY(8, 2, KEY_K),
+ KEY(8, 3, KEY_INSERT),
+ KEY(8, 4, KEY_LINEFEED),
+ KEY(8, 5, KEY_U),
+ KEY(8, 6, KEY_I),
+ KEY(8, 7, KEY_O),
+
+ KEY(9, 0, KEY_4),
+ KEY(9, 1, KEY_5),
+ KEY(9, 2, KEY_6),
+ KEY(9, 3, KEY_7),
+ KEY(9, 4, KEY_8),
+ KEY(9, 5, KEY_1),
+ KEY(9, 6, KEY_2),
+ KEY(9, 7, KEY_3),
+
+ KEY(10, 0, KEY_F7),
+ KEY(10, 1, KEY_F8),
+ KEY(10, 2, KEY_F9),
+ KEY(10, 3, KEY_F10),
+ KEY(10, 4, KEY_FN),
+ KEY(10, 5, KEY_9),
+ KEY(10, 6, KEY_0),
+ KEY(10, 7, KEY_DOT),
+
+ KEY(11, 0, KEY_LEFTCTRL),
+ KEY(11, 1, KEY_F11),
+ KEY(11, 2, KEY_ENTER),
+ KEY(11, 3, KEY_SEARCH),
+ KEY(11, 4, KEY_DELETE),
+ KEY(11, 5, KEY_RIGHT),
+ KEY(11, 6, KEY_LEFT),
+ KEY(11, 7, KEY_RIGHTSHIFT),
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_VOLUMEDOWN),
+ KEY(0, 2, KEY_CAMERA_SNAPSHOT),
+ KEY(0, 3, KEY_CAMERA_FOCUS),
+};
+
+static struct matrix_keymap_data keymap_data_sim = {
+ .keymap_size = ARRAY_SIZE(keymap_sim),
+ .keymap = keymap_sim,
+};
+
+static struct pm8xxx_keypad_platform_data keypad_data_sim = {
+ .input_name = "keypad_8960",
+ .input_phys_device = "keypad_8960/input0",
+ .num_rows = 12,
+ .num_cols = 8,
+ .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
+ .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
+ .debounce_ms = 15,
+ .scan_delay_ms = 32,
+ .row_hold_ns = 91500,
+ .wakeup = 1,
+ .keymap_data = &keymap_data_sim,
+};
+
+static int pm8921_therm_mitigation[] = {
+ 1100,
+ 700,
+ 600,
+ 325,
+};
+
+static struct pm8921_charger_platform_data pm8921_chg_pdata __devinitdata = {
+ .safety_time = 180,
+ .update_time = 60000,
+ .max_voltage = 4200,
+ .min_voltage = 3200,
+ .resume_voltage_delta = 100,
+ .term_current = 100,
+ .cool_temp = 10,
+ .warm_temp = 40,
+ .temp_check_period = 1,
+ .max_bat_chg_current = 1100,
+ .cool_bat_chg_current = 350,
+ .warm_bat_chg_current = 350,
+ .cool_bat_voltage = 4100,
+ .warm_bat_voltage = 4100,
+ .thermal_mitigation = pm8921_therm_mitigation,
+ .thermal_levels = ARRAY_SIZE(pm8921_therm_mitigation),
+};
+
+static struct pm8xxx_misc_platform_data pm8xxx_misc_pdata = {
+ .priority = 0,
+};
+
+static struct pm8921_bms_platform_data pm8921_bms_pdata __devinitdata = {
+ .r_sense = 10,
+ .i_test = 2500,
+ .v_failure = 3000,
+ .calib_delay_ms = 600000,
+};
+
+#define PM8921_LC_LED_MAX_CURRENT 4 /* I = 4mA */
+#define PM8XXX_LED_PWM_PERIOD 1000
+#define PM8XXX_LED_PWM_DUTY_MS 20
+/**
+ * PM8XXX_PWM_CHANNEL_NONE shall be used when LED shall not be
+ * driven using PWM feature.
+ */
+#define PM8XXX_PWM_CHANNEL_NONE -1
+
+static struct led_info pm8921_led_info[] = {
+ [0] = {
+ .name = "led:battery_charging",
+ .default_trigger = "battery-charging",
+ },
+ [1] = {
+ .name = "led:battery_full",
+ .default_trigger = "battery-full",
+ },
+};
+
+static struct led_platform_data pm8921_led_core_pdata = {
+ .num_leds = ARRAY_SIZE(pm8921_led_info),
+ .leds = pm8921_led_info,
+};
+
+static int pm8921_led0_pwm_duty_pcts[56] = {
+ 1, 4, 8, 12, 16, 20, 24, 28, 32, 36,
+ 40, 44, 46, 52, 56, 60, 64, 68, 72, 76,
+ 80, 84, 88, 92, 96, 100, 100, 100, 98, 95,
+ 92, 88, 84, 82, 78, 74, 70, 66, 62, 58,
+ 58, 54, 50, 48, 42, 38, 34, 30, 26, 22,
+ 14, 10, 6, 4, 1
+};
+
+static struct pm8xxx_pwm_duty_cycles pm8921_led0_pwm_duty_cycles = {
+ .duty_pcts = (int *)&pm8921_led0_pwm_duty_pcts,
+ .num_duty_pcts = ARRAY_SIZE(pm8921_led0_pwm_duty_pcts),
+ .duty_ms = PM8XXX_LED_PWM_DUTY_MS,
+ .start_idx = 0,
+};
+
+static struct pm8xxx_led_config pm8921_led_configs[] = {
+ [0] = {
+ .id = PM8XXX_ID_LED_0,
+ .mode = PM8XXX_LED_MODE_PWM2,
+ .max_current = PM8921_LC_LED_MAX_CURRENT,
+ .pwm_channel = 5,
+ .pwm_period_us = PM8XXX_LED_PWM_PERIOD,
+ .pwm_duty_cycles = &pm8921_led0_pwm_duty_cycles,
+ },
+ [1] = {
+ .id = PM8XXX_ID_LED_1,
+ .mode = PM8XXX_LED_MODE_PWM1,
+ .max_current = PM8921_LC_LED_MAX_CURRENT,
+ .pwm_channel = 4,
+ .pwm_period_us = PM8XXX_LED_PWM_PERIOD,
+ },
+};
+
+static struct pm8xxx_led_platform_data pm8xxx_leds_pdata = {
+ .led_core = &pm8921_led_core_pdata,
+ .configs = pm8921_led_configs,
+ .num_configs = ARRAY_SIZE(pm8921_led_configs),
+};
+
+static struct pm8xxx_ccadc_platform_data pm8xxx_ccadc_pdata = {
+ .r_sense = 10,
+};
+
+static struct pm8921_platform_data pm8921_platform_data __devinitdata = {
+ .irq_pdata = &pm8xxx_irq_pdata,
+ .gpio_pdata = &pm8xxx_gpio_pdata,
+ .mpp_pdata = &pm8xxx_mpp_pdata,
+ .rtc_pdata = &pm8xxx_rtc_pdata,
+ .pwrkey_pdata = &pm8xxx_pwrkey_pdata,
+ .keypad_pdata = &keypad_data,
+ .misc_pdata = &pm8xxx_misc_pdata,
+ .regulator_pdatas = msm_pm8921_regulator_pdata,
+ .charger_pdata = &pm8921_chg_pdata,
+ .bms_pdata = &pm8921_bms_pdata,
+ .adc_pdata = &pm8xxx_adc_pdata,
+ .leds_pdata = &pm8xxx_leds_pdata,
+ .ccadc_pdata = &pm8xxx_ccadc_pdata,
+};
+
+static struct msm_ssbi_platform_data msm8960_ssbi_pm8921_pdata __devinitdata = {
+ .controller_type = MSM_SBI_CTRL_PMIC_ARBITER,
+ .slave = {
+ .name = "pm8921-core",
+ .platform_data = &pm8921_platform_data,
+ },
+};
+
+void __init msm8960_init_pmic(void)
+{
+ pmic_reset_irq = PM8921_IRQ_BASE + PM8921_RESOUT_IRQ;
+ msm8960_device_ssbi_pm8921.dev.platform_data =
+ &msm8960_ssbi_pm8921_pdata;
+ pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+
+ /* Simulator supports a QWERTY keypad */
+ if (machine_is_msm8960_sim())
+ pm8921_platform_data.keypad_pdata = &keypad_data_sim;
+
+ if (machine_is_msm8960_liquid())
+ pm8921_platform_data.keypad_pdata = &keypad_data_liquid;
+}
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index fcee0de..a366541 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -104,117 +104,6 @@
.id = -1,
};
-struct pm8xxx_gpio_init {
- unsigned gpio;
- struct pm_gpio config;
-};
-
-struct pm8xxx_mpp_init {
- unsigned mpp;
- struct pm8xxx_mpp_config_data config;
-};
-
-#define PM8XXX_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \
- _func, _inv, _disable) \
-{ \
- .gpio = PM8921_GPIO_PM_TO_SYS(_gpio), \
- .config = { \
- .direction = _dir, \
- .output_buffer = _buf, \
- .output_value = _val, \
- .pull = _pull, \
- .vin_sel = _vin, \
- .out_strength = _out_strength, \
- .function = _func, \
- .inv_int_pol = _inv, \
- .disable_pin = _disable, \
- } \
-}
-
-#define PM8XXX_MPP_INIT(_mpp, _type, _level, _control) \
-{ \
- .mpp = PM8921_MPP_PM_TO_SYS(_mpp), \
- .config = { \
- .type = PM8XXX_MPP_TYPE_##_type, \
- .level = _level, \
- .control = PM8XXX_MPP_##_control, \
- } \
-}
-
-#define PM8XXX_GPIO_DISABLE(_gpio) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM_GPIO_VIN_S4, \
- 0, 0, 0, 1)
-
-#define PM8XXX_GPIO_OUTPUT(_gpio, _val) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
- PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
- PM_GPIO_STRENGTH_HIGH, \
- PM_GPIO_FUNC_NORMAL, 0, 0)
-
-#define PM8XXX_GPIO_INPUT(_gpio, _pull) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \
- _pull, PM_GPIO_VIN_S4, \
- PM_GPIO_STRENGTH_NO, \
- PM_GPIO_FUNC_NORMAL, 0, 0)
-
-#define PM8XXX_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
- PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
- PM_GPIO_STRENGTH_HIGH, \
- _func, 0, 0)
-
-#define PM8XXX_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
- PM_GPIO_PULL_NO, _vin, \
- PM_GPIO_STRENGTH_HIGH, \
- PM_GPIO_FUNC_NORMAL, 0, 0)
-
-/* Initial PM8921 GPIO configurations */
-static struct pm8xxx_gpio_init pm8921_gpios[] __initdata = {
- PM8XXX_GPIO_DISABLE(6), /* Disable unused */
- PM8XXX_GPIO_DISABLE(7), /* Disable NFC */
- PM8XXX_GPIO_INPUT(16, PM_GPIO_PULL_UP_30), /* SD_CARD_WP */
- /* External regulator shared by display and touchscreen on LiQUID */
- PM8XXX_GPIO_OUTPUT(17, 0), /* DISP 3.3 V Boost */
- PM8XXX_GPIO_OUTPUT_VIN(21, 1, PM_GPIO_VIN_VPH), /* Backlight Enable */
- PM8XXX_GPIO_DISABLE(22), /* Disable NFC */
- PM8XXX_GPIO_OUTPUT_FUNC(24, 0, PM_GPIO_FUNC_2), /* Bl: Off, PWM mode */
- PM8XXX_GPIO_INPUT(26, PM_GPIO_PULL_UP_30), /* SD_CARD_DET_N */
- PM8XXX_GPIO_OUTPUT(43, PM_GPIO_PULL_UP_30), /* DISP_RESET_N */
- PM8XXX_GPIO_OUTPUT(42, 0), /* USB 5V reg enable */
-};
-
-/* Initial PM8921 MPP configurations */
-static struct pm8xxx_mpp_init pm8921_mpps[] __initdata = {
- /* External 5V regulator enable; shared by HDMI and USB_OTG switches. */
- PM8XXX_MPP_INIT(7, D_INPUT, PM8921_MPP_DIG_LEVEL_VPH, DIN_TO_INT),
- PM8XXX_MPP_INIT(PM8XXX_AMUX_MPP_8, A_INPUT, PM8XXX_MPP_AIN_AMUX_CH8,
- DOUT_CTRL_LOW),
-};
-
-static void __init pm8921_gpio_mpp_init(void)
-{
- int i, rc;
-
- for (i = 0; i < ARRAY_SIZE(pm8921_gpios); i++) {
- rc = pm8xxx_gpio_config(pm8921_gpios[i].gpio,
- &pm8921_gpios[i].config);
- if (rc) {
- pr_err("%s: pm8xxx_gpio_config: rc=%d\n", __func__, rc);
- break;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(pm8921_mpps); i++) {
- rc = pm8xxx_mpp_config(pm8921_mpps[i].mpp,
- &pm8921_mpps[i].config);
- if (rc) {
- pr_err("%s: pm8xxx_mpp_config: rc=%d\n", __func__, rc);
- break;
- }
- }
-}
-
#define KS8851_RST_GPIO 89
#define KS8851_IRQ_GPIO 90
@@ -1382,54 +1271,6 @@
#define MSM_SHARED_RAM_PHYS 0x80000000
-static struct pm8xxx_adc_amux pm8xxx_adc_channels_data[] = {
- {"vcoin", CHANNEL_VCOIN, CHAN_PATH_SCALING2, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"vbat", CHANNEL_VBAT, CHAN_PATH_SCALING2, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"dcin", CHANNEL_DCIN, CHAN_PATH_SCALING4, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"ichg", CHANNEL_ICHG, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"vph_pwr", CHANNEL_VPH_PWR, CHAN_PATH_SCALING2, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"ibat", CHANNEL_IBAT, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"batt_therm", CHANNEL_BATT_THERM, CHAN_PATH_SCALING1, AMUX_RSV2,
- ADC_DECIMATION_TYPE2, ADC_SCALE_BATT_THERM},
- {"batt_id", CHANNEL_BATT_ID, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"usbin", CHANNEL_USBIN, CHAN_PATH_SCALING3, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"pmic_therm", CHANNEL_DIE_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_PMIC_THERM},
- {"625mv", CHANNEL_625MV, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"125v", CHANNEL_125V, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"chg_temp", CHANNEL_CHG_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
- {"pa_therm1", ADC_MPP_1_AMUX8, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
- {"xo_therm", CHANNEL_MUXOFF, CHAN_PATH_SCALING1, AMUX_RSV0,
- ADC_DECIMATION_TYPE2, ADC_SCALE_XOTHERM},
- {"pa_therm0", ADC_MPP_1_AMUX3, CHAN_PATH_SCALING1, AMUX_RSV1,
- ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
-};
-
-static struct pm8xxx_adc_properties pm8xxx_adc_data = {
- .adc_vdd_reference = 1800, /* milli-voltage for this adc */
- .bitresolution = 15,
- .bipolar = 0,
-};
-
-static struct pm8xxx_adc_platform_data pm8xxx_adc_pdata = {
- .adc_channel = pm8xxx_adc_channels_data,
- .adc_num_board_channel = ARRAY_SIZE(pm8xxx_adc_channels_data),
- .adc_prop = &pm8xxx_adc_data,
- .adc_mpp_base = PM8921_MPP_PM_TO_SYS(1),
-};
-
static void __init msm8960_map_io(void)
{
msm_shared_ram_phys = MSM_SHARED_RAM_PHYS;
@@ -1984,7 +1825,6 @@
},
};
-
static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = {
[0] = {
.reg_base_addr = MSM_SAW_L2_BASE,
@@ -2723,350 +2563,6 @@
}
}
-static struct pm8xxx_irq_platform_data pm8xxx_irq_pdata __devinitdata = {
- .irq_base = PM8921_IRQ_BASE,
- .devirq = MSM_GPIO_TO_INT(104),
- .irq_trigger_flag = IRQF_TRIGGER_LOW,
-};
-
-static struct pm8xxx_gpio_platform_data pm8xxx_gpio_pdata __devinitdata = {
- .gpio_base = PM8921_GPIO_PM_TO_SYS(1),
-};
-
-static struct pm8xxx_mpp_platform_data pm8xxx_mpp_pdata __devinitdata = {
- .mpp_base = PM8921_MPP_PM_TO_SYS(1),
-};
-
-static struct pm8xxx_rtc_platform_data pm8xxx_rtc_pdata __devinitdata = {
- .rtc_write_enable = false,
- .rtc_alarm_powerup = false,
-};
-
-static struct pm8xxx_pwrkey_platform_data pm8xxx_pwrkey_pdata = {
- .pull_up = 1,
- .kpd_trigger_delay_us = 970,
- .wakeup = 1,
-};
-
-/* Rotate lock key is not available so use F1 */
-#define KEY_ROTATE_LOCK KEY_F1
-
-static const unsigned int keymap_liquid[] = {
- KEY(0, 0, KEY_VOLUMEUP),
- KEY(0, 1, KEY_VOLUMEDOWN),
- KEY(1, 3, KEY_ROTATE_LOCK),
- KEY(1, 4, KEY_HOME),
-};
-
-static struct matrix_keymap_data keymap_data_liquid = {
- .keymap_size = ARRAY_SIZE(keymap_liquid),
- .keymap = keymap_liquid,
-};
-
-static struct pm8xxx_keypad_platform_data keypad_data_liquid = {
- .input_name = "keypad_8960_liquid",
- .input_phys_device = "keypad_8960/input0",
- .num_rows = 2,
- .num_cols = 5,
- .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
- .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
- .debounce_ms = 15,
- .scan_delay_ms = 32,
- .row_hold_ns = 91500,
- .wakeup = 1,
- .keymap_data = &keymap_data_liquid,
-};
-
-
-static const unsigned int keymap[] = {
- KEY(0, 0, KEY_VOLUMEUP),
- KEY(0, 1, KEY_VOLUMEDOWN),
- KEY(0, 2, KEY_CAMERA_SNAPSHOT),
- KEY(0, 3, KEY_CAMERA_FOCUS),
-};
-
-static struct matrix_keymap_data keymap_data = {
- .keymap_size = ARRAY_SIZE(keymap),
- .keymap = keymap,
-};
-
-static struct pm8xxx_keypad_platform_data keypad_data = {
- .input_name = "keypad_8960",
- .input_phys_device = "keypad_8960/input0",
- .num_rows = 1,
- .num_cols = 5,
- .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
- .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
- .debounce_ms = 15,
- .scan_delay_ms = 32,
- .row_hold_ns = 91500,
- .wakeup = 1,
- .keymap_data = &keymap_data,
-};
-
-static const unsigned int keymap_sim[] = {
- KEY(0, 0, KEY_7),
- KEY(0, 1, KEY_DOWN),
- KEY(0, 2, KEY_UP),
- KEY(0, 3, KEY_RIGHT),
- KEY(0, 4, KEY_ENTER),
- KEY(0, 5, KEY_L),
- KEY(0, 6, KEY_BACK),
- KEY(0, 7, KEY_M),
-
- KEY(1, 0, KEY_LEFT),
- KEY(1, 1, KEY_SEND),
- KEY(1, 2, KEY_1),
- KEY(1, 3, KEY_4),
- KEY(1, 4, KEY_CLEAR),
- KEY(1, 5, KEY_MSDOS),
- KEY(1, 6, KEY_SPACE),
- KEY(1, 7, KEY_COMMA),
-
- KEY(2, 0, KEY_6),
- KEY(2, 1, KEY_5),
- KEY(2, 2, KEY_8),
- KEY(2, 3, KEY_3),
- KEY(2, 4, KEY_NUMERIC_STAR),
- KEY(2, 5, KEY_UP),
- KEY(2, 6, KEY_DOWN),
- KEY(2, 7, KEY_LEFTSHIFT),
-
- KEY(3, 0, KEY_9),
- KEY(3, 1, KEY_NUMERIC_POUND),
- KEY(3, 2, KEY_0),
- KEY(3, 3, KEY_2),
- KEY(3, 4, KEY_SLEEP),
- KEY(3, 5, KEY_F1),
- KEY(3, 6, KEY_F2),
- KEY(3, 7, KEY_F3),
-
- KEY(4, 0, KEY_BACK),
- KEY(4, 1, KEY_HOME),
- KEY(4, 2, KEY_MENU),
- KEY(4, 3, KEY_VOLUMEUP),
- KEY(4, 4, KEY_VOLUMEDOWN),
- KEY(4, 5, KEY_F4),
- KEY(4, 6, KEY_F5),
- KEY(4, 7, KEY_F6),
-
- KEY(5, 0, KEY_R),
- KEY(5, 1, KEY_T),
- KEY(5, 2, KEY_Y),
- KEY(5, 3, KEY_LEFTALT),
- KEY(5, 4, KEY_KPENTER),
- KEY(5, 5, KEY_Q),
- KEY(5, 6, KEY_W),
- KEY(5, 7, KEY_E),
-
- KEY(6, 0, KEY_F),
- KEY(6, 1, KEY_G),
- KEY(6, 2, KEY_H),
- KEY(6, 3, KEY_CAPSLOCK),
- KEY(6, 4, KEY_PAGEUP),
- KEY(6, 5, KEY_A),
- KEY(6, 6, KEY_S),
- KEY(6, 7, KEY_D),
-
- KEY(7, 0, KEY_V),
- KEY(7, 1, KEY_B),
- KEY(7, 2, KEY_N),
- KEY(7, 3, KEY_MENU),
- KEY(7, 4, KEY_PAGEDOWN),
- KEY(7, 5, KEY_Z),
- KEY(7, 6, KEY_X),
- KEY(7, 7, KEY_C),
-
- KEY(8, 0, KEY_P),
- KEY(8, 1, KEY_J),
- KEY(8, 2, KEY_K),
- KEY(8, 3, KEY_INSERT),
- KEY(8, 4, KEY_LINEFEED),
- KEY(8, 5, KEY_U),
- KEY(8, 6, KEY_I),
- KEY(8, 7, KEY_O),
-
- KEY(9, 0, KEY_4),
- KEY(9, 1, KEY_5),
- KEY(9, 2, KEY_6),
- KEY(9, 3, KEY_7),
- KEY(9, 4, KEY_8),
- KEY(9, 5, KEY_1),
- KEY(9, 6, KEY_2),
- KEY(9, 7, KEY_3),
-
- KEY(10, 0, KEY_F7),
- KEY(10, 1, KEY_F8),
- KEY(10, 2, KEY_F9),
- KEY(10, 3, KEY_F10),
- KEY(10, 4, KEY_FN),
- KEY(10, 5, KEY_9),
- KEY(10, 6, KEY_0),
- KEY(10, 7, KEY_DOT),
-
- KEY(11, 0, KEY_LEFTCTRL),
- KEY(11, 1, KEY_F11),
- KEY(11, 2, KEY_ENTER),
- KEY(11, 3, KEY_SEARCH),
- KEY(11, 4, KEY_DELETE),
- KEY(11, 5, KEY_RIGHT),
- KEY(11, 6, KEY_LEFT),
- KEY(11, 7, KEY_RIGHTSHIFT),
- KEY(0, 0, KEY_VOLUMEUP),
- KEY(0, 1, KEY_VOLUMEDOWN),
- KEY(0, 2, KEY_CAMERA_SNAPSHOT),
- KEY(0, 3, KEY_CAMERA_FOCUS),
-};
-
-static struct matrix_keymap_data keymap_data_sim = {
- .keymap_size = ARRAY_SIZE(keymap_sim),
- .keymap = keymap_sim,
-};
-
-static struct pm8xxx_keypad_platform_data keypad_data_sim = {
- .input_name = "keypad_8960",
- .input_phys_device = "keypad_8960/input0",
- .num_rows = 12,
- .num_cols = 8,
- .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9),
- .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1),
- .debounce_ms = 15,
- .scan_delay_ms = 32,
- .row_hold_ns = 91500,
- .wakeup = 1,
- .keymap_data = &keymap_data_sim,
-};
-
-static int pm8921_therm_mitigation[] = {
- 1100,
- 700,
- 600,
- 325,
-};
-
-static struct pm8921_charger_platform_data pm8921_chg_pdata __devinitdata = {
- .safety_time = 180,
- .update_time = 60000,
- .max_voltage = 4200,
- .min_voltage = 3200,
- .resume_voltage_delta = 100,
- .term_current = 100,
- .cool_temp = 10,
- .warm_temp = 40,
- .temp_check_period = 1,
- .max_bat_chg_current = 1100,
- .cool_bat_chg_current = 350,
- .warm_bat_chg_current = 350,
- .cool_bat_voltage = 4100,
- .warm_bat_voltage = 4100,
- .thermal_mitigation = pm8921_therm_mitigation,
- .thermal_levels = ARRAY_SIZE(pm8921_therm_mitigation),
-};
-
-static struct pm8xxx_misc_platform_data pm8xxx_misc_pdata = {
- .priority = 0,
-};
-
-static struct pm8921_bms_platform_data pm8921_bms_pdata __devinitdata = {
- .r_sense = 10,
- .i_test = 2500,
- .v_failure = 3000,
- .calib_delay_ms = 600000,
-};
-
-#define PM8921_LC_LED_MAX_CURRENT 4 /* I = 4mA */
-#define PM8XXX_LED_PWM_PERIOD 1000
-#define PM8XXX_LED_PWM_DUTY_MS 20
-/**
- * PM8XXX_PWM_CHANNEL_NONE shall be used when LED shall not be
- * driven using PWM feature.
- */
-#define PM8XXX_PWM_CHANNEL_NONE -1
-
-static struct led_info pm8921_led_info[] = {
- [0] = {
- .name = "led:battery_charging",
- .default_trigger = "battery-charging",
- },
- [1] = {
- .name = "led:battery_full",
- .default_trigger = "battery-full",
- },
-};
-
-static struct led_platform_data pm8921_led_core_pdata = {
- .num_leds = ARRAY_SIZE(pm8921_led_info),
- .leds = pm8921_led_info,
-};
-
-static int pm8921_led0_pwm_duty_pcts[56] = {
- 1, 4, 8, 12, 16, 20, 24, 28, 32, 36,
- 40, 44, 46, 52, 56, 60, 64, 68, 72, 76,
- 80, 84, 88, 92, 96, 100, 100, 100, 98, 95,
- 92, 88, 84, 82, 78, 74, 70, 66, 62, 58,
- 58, 54, 50, 48, 42, 38, 34, 30, 26, 22,
- 14, 10, 6, 4, 1
-};
-
-static struct pm8xxx_pwm_duty_cycles pm8921_led0_pwm_duty_cycles = {
- .duty_pcts = (int *)&pm8921_led0_pwm_duty_pcts,
- .num_duty_pcts = ARRAY_SIZE(pm8921_led0_pwm_duty_pcts),
- .duty_ms = PM8XXX_LED_PWM_DUTY_MS,
- .start_idx = 0,
-};
-
-static struct pm8xxx_led_config pm8921_led_configs[] = {
- [0] = {
- .id = PM8XXX_ID_LED_0,
- .mode = PM8XXX_LED_MODE_PWM2,
- .max_current = PM8921_LC_LED_MAX_CURRENT,
- .pwm_channel = 5,
- .pwm_period_us = PM8XXX_LED_PWM_PERIOD,
- .pwm_duty_cycles = &pm8921_led0_pwm_duty_cycles,
- },
- [1] = {
- .id = PM8XXX_ID_LED_1,
- .mode = PM8XXX_LED_MODE_PWM1,
- .max_current = PM8921_LC_LED_MAX_CURRENT,
- .pwm_channel = 4,
- .pwm_period_us = PM8XXX_LED_PWM_PERIOD,
- },
-};
-
-static struct pm8xxx_led_platform_data pm8xxx_leds_pdata = {
- .led_core = &pm8921_led_core_pdata,
- .configs = pm8921_led_configs,
- .num_configs = ARRAY_SIZE(pm8921_led_configs),
-};
-
-static struct pm8xxx_ccadc_platform_data pm8xxx_ccadc_pdata = {
- .r_sense = 10,
-};
-
-static struct pm8921_platform_data pm8921_platform_data __devinitdata = {
- .irq_pdata = &pm8xxx_irq_pdata,
- .gpio_pdata = &pm8xxx_gpio_pdata,
- .mpp_pdata = &pm8xxx_mpp_pdata,
- .rtc_pdata = &pm8xxx_rtc_pdata,
- .pwrkey_pdata = &pm8xxx_pwrkey_pdata,
- .keypad_pdata = &keypad_data,
- .misc_pdata = &pm8xxx_misc_pdata,
- .regulator_pdatas = msm_pm8921_regulator_pdata,
- .charger_pdata = &pm8921_chg_pdata,
- .bms_pdata = &pm8921_bms_pdata,
- .adc_pdata = &pm8xxx_adc_pdata,
- .leds_pdata = &pm8xxx_leds_pdata,
- .ccadc_pdata = &pm8xxx_ccadc_pdata,
-};
-
-static struct msm_ssbi_platform_data msm8960_ssbi_pm8921_pdata __devinitdata = {
- .controller_type = MSM_SBI_CTRL_PMIC_ARBITER,
- .slave = {
- .name = "pm8921-core",
- .platform_data = &pm8921_platform_data,
- },
-};
-
static struct msm_cpuidle_state msm_cstates[] __initdata = {
{0, 0, "C0", "WFI",
MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT},
@@ -3369,12 +2865,7 @@
regulator_suppress_info_printing();
platform_device_register(&msm8960_device_rpm_regulator);
msm_clock_init(&msm8960_clock_init_data);
- msm8960_device_ssbi_pm8921.dev.platform_data =
- &msm8960_ssbi_pm8921_pdata;
- pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
-
- /* Simulator supports a QWERTY keypad */
- pm8921_platform_data.keypad_pdata = &keypad_data_sim;
+ msm8960_init_pmic();
msm8960_device_otg.dev.platform_data = &msm_otg_pdata;
gpiomux_init();
@@ -3383,7 +2874,7 @@
msm_spm_l2_init(msm_spm_l2_data);
msm8960_init_buses();
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
- pm8921_gpio_mpp_init();
+ msm8960_pm8921_gpio_mpp_init();
platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
acpuclk_init(&acpuclk_8960_soc_data);
@@ -3411,9 +2902,7 @@
platform_device_register(&msm8960_device_rpm_regulator);
msm_clock_init(&msm8960_dummy_clock_init_data);
gpiomux_init();
- msm8960_device_ssbi_pm8921.dev.platform_data =
- &msm8960_ssbi_pm8921_pdata;
- pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+ msm8960_init_pmic();
msm8960_device_qup_spi_gsbi1.dev.platform_data =
&msm8960_qup_spi_gsbi1_pdata;
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
@@ -3421,7 +2910,7 @@
msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data));
msm_spm_l2_init(msm_spm_l2_data);
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
- pm8921_gpio_mpp_init();
+ msm8960_pm8921_gpio_mpp_init();
platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
msm8960_init_mmc();
register_i2c_devices();
@@ -3444,7 +2933,6 @@
BUG_ON(msm_rpmrs_levels_init(msm_rpmrs_levels,
ARRAY_SIZE(msm_rpmrs_levels)));
- pmic_reset_irq = PM8921_IRQ_BASE + PM8921_RESOUT_IRQ;
regulator_suppress_info_printing();
if (msm_xo_init())
pr_err("Failed to initialize XO votes\n");
@@ -3461,14 +2949,11 @@
#endif
msm_device_hsic_host.dev.platform_data = &msm_hsic_pdata;
gpiomux_init();
- if (machine_is_msm8960_liquid())
- pm8921_platform_data.keypad_pdata = &keypad_data_liquid;
msm8960_device_qup_spi_gsbi1.dev.platform_data =
&msm8960_qup_spi_gsbi1_pdata;
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- msm8960_device_ssbi_pm8921.dev.platform_data =
- &msm8960_ssbi_pm8921_pdata;
- pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len;
+
+ msm8960_init_pmic();
msm8960_i2c_init();
msm8960_gfx_init();
msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data));
@@ -3479,7 +2964,7 @@
if (machine_is_msm8960_liquid())
platform_device_register(&msm8960_device_ext_3p3v_vreg);
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
- pm8921_gpio_mpp_init();
+ msm8960_pm8921_gpio_mpp_init();
platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices));
msm8960_init_hsic();
msm8960_init_cam();
diff --git a/arch/arm/mach-msm/board-msm8960.h b/arch/arm/mach-msm/board-msm8960.h
index 63d13dc..110b3a4 100644
--- a/arch/arm/mach-msm/board-msm8960.h
+++ b/arch/arm/mach-msm/board-msm8960.h
@@ -70,7 +70,9 @@
extern struct sx150x_platform_data msm8960_sx150x_data[];
void msm8960_init_cam(void);
void msm8960_init_fb(void);
+void msm8960_init_pmic(void);
void msm8960_allocate_fb_region(void);
+void msm8960_pm8921_gpio_mpp_init(void);
#define MSM_8960_GSBI4_QUP_I2C_BUS_ID 4
#define MSM_8960_GSBI3_QUP_I2C_BUS_ID 3