|  | /* | 
|  | * drivers/usb/input/wacom_sys.c | 
|  | * | 
|  | *  USB Wacom Graphire and Wacom Intuos tablet support - system specific code | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include "wacom.h" | 
|  | #include "wacom_wac.h" | 
|  |  | 
|  | #define USB_REQ_GET_REPORT	0x01 | 
|  | #define USB_REQ_SET_REPORT	0x09 | 
|  |  | 
|  | static int usb_get_report(struct usb_interface *intf, unsigned char type, | 
|  | unsigned char id, void *buf, int size) | 
|  | { | 
|  | return usb_control_msg(interface_to_usbdev(intf), | 
|  | usb_rcvctrlpipe(interface_to_usbdev(intf), 0), | 
|  | USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, | 
|  | buf, size, 100); | 
|  | } | 
|  |  | 
|  | static int usb_set_report(struct usb_interface *intf, unsigned char type, | 
|  | unsigned char id, void *buf, int size) | 
|  | { | 
|  | return usb_control_msg(interface_to_usbdev(intf), | 
|  | usb_sndctrlpipe(interface_to_usbdev(intf), 0), | 
|  | USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, | 
|  | buf, size, 1000); | 
|  | } | 
|  |  | 
|  | static struct input_dev * get_input_dev(struct wacom_combo *wcombo) | 
|  | { | 
|  | return wcombo->wacom->dev; | 
|  | } | 
|  |  | 
|  | void wacom_sys_irq(struct urb *urb) | 
|  | { | 
|  | struct wacom *wacom = urb->context; | 
|  | struct wacom_combo wcombo; | 
|  | int retval; | 
|  |  | 
|  | switch (urb->status) { | 
|  | case 0: | 
|  | /* success */ | 
|  | break; | 
|  | case -ECONNRESET: | 
|  | case -ENOENT: | 
|  | case -ESHUTDOWN: | 
|  | /* this urb is terminated, clean up */ | 
|  | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | 
|  | return; | 
|  | default: | 
|  | dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | wcombo.wacom = wacom; | 
|  | wcombo.urb = urb; | 
|  |  | 
|  | if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo)) | 
|  | input_sync(get_input_dev(&wcombo)); | 
|  |  | 
|  | exit: | 
|  | retval = usb_submit_urb (urb, GFP_ATOMIC); | 
|  | if (retval) | 
|  | err ("%s - usb_submit_urb failed with result %d", | 
|  | __FUNCTION__, retval); | 
|  | } | 
|  |  | 
|  | void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) | 
|  | { | 
|  | input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) | 
|  | { | 
|  | input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) | 
|  | { | 
|  | input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) | 
|  | { | 
|  | input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); | 
|  | return; | 
|  | } | 
|  |  | 
|  | __u16 wacom_be16_to_cpu(unsigned char *data) | 
|  | { | 
|  | __u16 value; | 
|  | value = be16_to_cpu(*(__be16 *) data); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | __u16 wacom_le16_to_cpu(unsigned char *data) | 
|  | { | 
|  | __u16 value; | 
|  | value = le16_to_cpu(*(__le16 *) data); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | void wacom_input_sync(void *wcombo) | 
|  | { | 
|  | input_sync(get_input_dev((struct wacom_combo *)wcombo)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int wacom_open(struct input_dev *dev) | 
|  | { | 
|  | struct wacom *wacom = dev->private; | 
|  |  | 
|  | wacom->irq->dev = wacom->usbdev; | 
|  | if (usb_submit_urb(wacom->irq, GFP_KERNEL)) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wacom_close(struct input_dev *dev) | 
|  | { | 
|  | struct wacom *wacom = dev->private; | 
|  |  | 
|  | usb_kill_urb(wacom->irq); | 
|  | } | 
|  |  | 
|  | void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->evbit[0] |= BIT(EV_MSC); | 
|  | input_dev->mscbit[0] |= BIT(MSC_SERIAL); | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); | 
|  | input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4); | 
|  | } | 
|  |  | 
|  | void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->evbit[0] |= BIT(EV_REL); | 
|  | input_dev->relbit[0] |= BIT(REL_WHEEL); | 
|  | input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); | 
|  | input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); | 
|  | } | 
|  |  | 
|  | void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); | 
|  | input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3); | 
|  | input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); | 
|  | } | 
|  |  | 
|  | void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); | 
|  | input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); | 
|  | } | 
|  |  | 
|  | void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); | 
|  | input_dev->mscbit[0] |= BIT(MSC_SERIAL); | 
|  | input_dev->relbit[0] |= BIT(REL_WHEEL); | 
|  | input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH) | 
|  | | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); | 
|  | input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); | 
|  | input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); | 
|  | } | 
|  |  | 
|  | void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); | 
|  | } | 
|  |  | 
|  | void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) | 
|  | { | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER); | 
|  | } | 
|  |  | 
|  | static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct usb_endpoint_descriptor *endpoint; | 
|  | struct wacom *wacom; | 
|  | struct wacom_wac *wacom_wac; | 
|  | struct input_dev *input_dev; | 
|  | char rep_data[2], limit = 0; | 
|  |  | 
|  | wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); | 
|  | wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); | 
|  | input_dev = input_allocate_device(); | 
|  | if (!wacom || !input_dev || !wacom_wac) | 
|  | goto fail1; | 
|  |  | 
|  | wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); | 
|  | if (!wacom_wac->data) | 
|  | goto fail1; | 
|  |  | 
|  | wacom->irq = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!wacom->irq) | 
|  | goto fail2; | 
|  |  | 
|  | wacom->usbdev = dev; | 
|  | wacom->dev = input_dev; | 
|  | usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); | 
|  | strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); | 
|  |  | 
|  | wacom_wac->features = get_wacom_feature(id); | 
|  | BUG_ON(wacom_wac->features->pktlen > 10); | 
|  |  | 
|  | input_dev->name = wacom_wac->features->name; | 
|  | wacom->wacom_wac = wacom_wac; | 
|  | usb_to_input_id(dev, &input_dev->id); | 
|  |  | 
|  | input_dev->cdev.dev = &intf->dev; | 
|  | input_dev->private = wacom; | 
|  | input_dev->open = wacom_open; | 
|  | input_dev->close = wacom_close; | 
|  |  | 
|  | input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); | 
|  | input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); | 
|  | input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); | 
|  | input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); | 
|  | input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); | 
|  | input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC); | 
|  |  | 
|  | wacom_init_input_dev(input_dev, wacom_wac); | 
|  |  | 
|  | endpoint = &intf->cur_altsetting->endpoint[0].desc; | 
|  |  | 
|  | usb_fill_int_urb(wacom->irq, dev, | 
|  | usb_rcvintpipe(dev, endpoint->bEndpointAddress), | 
|  | wacom_wac->data, wacom_wac->features->pktlen, | 
|  | wacom_sys_irq, wacom, endpoint->bInterval); | 
|  | wacom->irq->transfer_dma = wacom->data_dma; | 
|  | wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  |  | 
|  | input_register_device(wacom->dev); | 
|  |  | 
|  | /* Ask the tablet to report tablet data. Repeat until it succeeds */ | 
|  | do { | 
|  | rep_data[0] = 2; | 
|  | rep_data[1] = 2; | 
|  | usb_set_report(intf, 3, 2, rep_data, 2); | 
|  | usb_get_report(intf, 3, 2, rep_data, 2); | 
|  | } while (rep_data[1] != 2 && limit++ < 5); | 
|  |  | 
|  | usb_set_intfdata(intf, wacom); | 
|  | return 0; | 
|  |  | 
|  | fail2:	usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma); | 
|  | fail1:	input_free_device(input_dev); | 
|  | kfree(wacom); | 
|  | kfree(wacom_wac); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static void wacom_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct wacom *wacom = usb_get_intfdata (intf); | 
|  |  | 
|  | usb_set_intfdata(intf, NULL); | 
|  | if (wacom) { | 
|  | usb_kill_urb(wacom->irq); | 
|  | input_unregister_device(wacom->dev); | 
|  | usb_free_urb(wacom->irq); | 
|  | usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); | 
|  | kfree(wacom->wacom_wac); | 
|  | kfree(wacom); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct usb_driver wacom_driver = { | 
|  | .name =		"wacom", | 
|  | .probe =	wacom_probe, | 
|  | .disconnect =	wacom_disconnect, | 
|  | }; | 
|  |  | 
|  | static int __init wacom_init(void) | 
|  | { | 
|  | int result; | 
|  | wacom_driver.id_table = get_device_table(); | 
|  | result = usb_register(&wacom_driver); | 
|  | if (result == 0) | 
|  | info(DRIVER_VERSION ":" DRIVER_DESC); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void __exit wacom_exit(void) | 
|  | { | 
|  | usb_deregister(&wacom_driver); | 
|  | } | 
|  |  | 
|  | module_init(wacom_init); | 
|  | module_exit(wacom_exit); |