Merge commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126' into msm-3.4
AU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.
First parent is from google/android-3.4.
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126': (8712 commits)
PRNG: Device tree entry for qrng device.
vidc:1080p: Set video core timeout value for Thumbnail mode
msm: sps: improve the debugging support in SPS driver
board-8064 msm: Overlap secure and non secure video firmware heaps.
msm: clock: Add handoff ops for 7x30 and copper XO clocks
msm_fb: display: Wait for external vsync before DTV IOMMU unmap
msm: Fix ciruclar dependency in debug UART settings
msm: gdsc: Add GDSC regulator driver for msm-copper
defconfig: Enable Mobicore Driver.
mobicore: Add mobicore driver.
mobicore: rename variable to lower case.
mobicore: rename folder.
mobicore: add makefiles
mobicore: initial import of kernel driver
ASoC: msm: Add SLIMBUS_2_RX CPU DAI
board-8064-gpio: Update FUNC for EPM SPI CS
msm_fb: display: Remove chicken bit config during video playback
mmc: msm_sdcc: enable the sanitize capability
msm-fb: display: lm2 writeback support on mpq platfroms
msm_fb: display: Disable LVDS phy & pll during panel off
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 36ca507..4c59eab 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1155,6 +1155,111 @@
}
/*-------------------------------------------------------------------------*/
+/* This function creates the qtds and submits them for the
+ * SINGLE_STEP_SET_FEATURE Test.
+ * This is done in two parts: first SETUP req for GetDesc is sent then
+ * 15 seconds later, the IN stage for GetDesc starts to req data from dev
+ *
+ * is_setup : i/p arguement decides which of the two stage needs to be
+ * performed; TRUE - SETUP and FALSE - IN+STATUS
+ * Returns 0 if success
+ */
+#ifdef CONFIG_USB_EHCI_EHSET
+static int
+submit_single_step_set_feature(
+ struct usb_hcd *hcd,
+ struct urb *urb,
+ int is_setup
+) {
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct list_head qtd_list;
+ struct list_head *head ;
+
+ struct ehci_qtd *qtd, *qtd_prev;
+ dma_addr_t buf;
+ int len, maxpacket;
+ u32 token;
+
+ INIT_LIST_HEAD(&qtd_list);
+ head = &qtd_list;
+
+ /*
+ * URBs map to sequences of QTDs: one logical transaction
+ */
+ qtd = ehci_qtd_alloc(ehci, GFP_KERNEL);
+ if (unlikely(!qtd))
+ return -1;
+ list_add_tail(&qtd->qtd_list, head);
+ qtd->urb = urb;
+
+ token = QTD_STS_ACTIVE;
+ token |= (EHCI_TUNE_CERR << 10);
+
+ len = urb->transfer_buffer_length;
+ /* Check if the request is to perform just the SETUP stage (getDesc)
+ * as in SINGLE_STEP_SET_FEATURE test, DATA stage (IN) happens
+ * 15 secs after the setup
+ */
+ if (is_setup) {
+ /* SETUP pid */
+ qtd_fill(ehci, qtd, urb->setup_dma,
+ sizeof(struct usb_ctrlrequest),
+ token | (2 /* "setup" */ << 8), 8);
+
+ submit_async(ehci, urb, &qtd_list, GFP_ATOMIC);
+ return 0; /*Return now; we shall come back after 15 seconds*/
+ }
+
+ /*---------------------------------------------------------------------
+ * IN: data transfer stage: buffer setup : start the IN txn phase for
+ * the get_Desc SETUP which was sent 15seconds back
+ */
+ token ^= QTD_TOGGLE; /*We need to start IN with DATA-1 Pid-sequence*/
+ buf = urb->transfer_dma;
+
+ token |= (1 /* "in" */ << 8); /*This is IN stage*/
+
+ maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, 0));
+
+ qtd_fill(ehci, qtd, buf, len, token, maxpacket);
+
+ /* Our IN phase shall always be a short read; so keep the queue running
+ * and let it advance to the next qtd which zero length OUT status */
+
+ qtd->hw_alt_next = EHCI_LIST_END(ehci);
+
+ /*----------------------------------------------------------------------
+ * STATUS stage for GetDesc control request
+ */
+ token ^= 0x0100; /* "in" <--> "out" */
+ token |= QTD_TOGGLE; /* force DATA1 */
+
+ qtd_prev = qtd;
+ qtd = ehci_qtd_alloc(ehci, GFP_ATOMIC);
+ if (unlikely(!qtd))
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* dont fill any data in such packets */
+ qtd_fill(ehci, qtd, 0, 0, token, 0);
+
+ /* by default, enable interrupt on urb completion */
+ if (likely(!(urb->transfer_flags & URB_NO_INTERRUPT)))
+ qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC);
+
+ submit_async(ehci, urb, &qtd_list, GFP_KERNEL);
+
+ return 0;
+
+cleanup:
+ qtd_list_free(ehci, urb, head);
+ return -1;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
/* the async qh for the qtds being reclaimed are now unlinked from the HC */