|  | /* | 
|  | *  arch/arm/common/dmabounce.c | 
|  | * | 
|  | *  Special dma_{map/unmap/dma_sync}_* routines for systems that have | 
|  | *  limited DMA windows. These functions utilize bounce buffers to | 
|  | *  copy data to/from buffers located outside the DMA region. This | 
|  | *  only works for systems in which DMA memory is at the bottom of | 
|  | *  RAM, the remainder of memory is at the top and the DMA memory | 
|  | *  can be marked as ZONE_DMA. Anything beyond that such as discontigous | 
|  | *  DMA windows will require custom implementations that reserve memory | 
|  | *  areas at early bootup. | 
|  | * | 
|  | *  Original version by Brad Parker (brad@heeltoe.com) | 
|  | *  Re-written by Christopher Hoover <ch@murgatroid.com> | 
|  | *  Made generic by Deepak Saxena <dsaxena@plexity.net> | 
|  | * | 
|  | *  Copyright (C) 2002 Hewlett Packard Company. | 
|  | *  Copyright (C) 2004 MontaVista Software, Inc. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or | 
|  | *  modify it under the terms of the GNU General Public License | 
|  | *  version 2 as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/dmapool.h> | 
|  | #include <linux/list.h> | 
|  |  | 
|  | #include <asm/cacheflush.h> | 
|  |  | 
|  | #undef DEBUG | 
|  | #undef STATS | 
|  |  | 
|  | #ifdef STATS | 
|  | #define DO_STATS(X) do { X ; } while (0) | 
|  | #else | 
|  | #define DO_STATS(X) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | struct safe_buffer { | 
|  | struct list_head node; | 
|  |  | 
|  | /* original request */ | 
|  | void		*ptr; | 
|  | size_t		size; | 
|  | int		direction; | 
|  |  | 
|  | /* safe buffer info */ | 
|  | struct dmabounce_pool *pool; | 
|  | void		*safe; | 
|  | dma_addr_t	safe_dma_addr; | 
|  | }; | 
|  |  | 
|  | struct dmabounce_pool { | 
|  | unsigned long	size; | 
|  | struct dma_pool	*pool; | 
|  | #ifdef STATS | 
|  | unsigned long	allocs; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | struct dmabounce_device_info { | 
|  | struct list_head node; | 
|  |  | 
|  | struct device *dev; | 
|  | struct list_head safe_buffers; | 
|  | #ifdef STATS | 
|  | unsigned long total_allocs; | 
|  | unsigned long map_op_count; | 
|  | unsigned long bounce_count; | 
|  | #endif | 
|  | struct dmabounce_pool	small; | 
|  | struct dmabounce_pool	large; | 
|  |  | 
|  | rwlock_t lock; | 
|  | }; | 
|  |  | 
|  | static LIST_HEAD(dmabounce_devs); | 
|  |  | 
|  | #ifdef STATS | 
|  | static void print_alloc_stats(struct dmabounce_device_info *device_info) | 
|  | { | 
|  | printk(KERN_INFO | 
|  | "%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n", | 
|  | device_info->dev->bus_id, | 
|  | device_info->small.allocs, device_info->large.allocs, | 
|  | device_info->total_allocs - device_info->small.allocs - | 
|  | device_info->large.allocs, | 
|  | device_info->total_allocs); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* find the given device in the dmabounce device list */ | 
|  | static inline struct dmabounce_device_info * | 
|  | find_dmabounce_dev(struct device *dev) | 
|  | { | 
|  | struct dmabounce_device_info *d; | 
|  |  | 
|  | list_for_each_entry(d, &dmabounce_devs, node) | 
|  | if (d->dev == dev) | 
|  | return d; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* allocate a 'safe' buffer and keep track of it */ | 
|  | static inline struct safe_buffer * | 
|  | alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, | 
|  | size_t size, enum dma_data_direction dir) | 
|  | { | 
|  | struct safe_buffer *buf; | 
|  | struct dmabounce_pool *pool; | 
|  | struct device *dev = device_info->dev; | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n", | 
|  | __func__, ptr, size, dir); | 
|  |  | 
|  | if (size <= device_info->small.size) { | 
|  | pool = &device_info->small; | 
|  | } else if (size <= device_info->large.size) { | 
|  | pool = &device_info->large; | 
|  | } else { | 
|  | pool = NULL; | 
|  | } | 
|  |  | 
|  | buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); | 
|  | if (buf == NULL) { | 
|  | dev_warn(dev, "%s: kmalloc failed\n", __func__); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | buf->ptr = ptr; | 
|  | buf->size = size; | 
|  | buf->direction = dir; | 
|  | buf->pool = pool; | 
|  |  | 
|  | if (pool) { | 
|  | buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC, | 
|  | &buf->safe_dma_addr); | 
|  | } else { | 
|  | buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr, | 
|  | GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | if (buf->safe == NULL) { | 
|  | dev_warn(dev, | 
|  | "%s: could not alloc dma memory (size=%d)\n", | 
|  | __func__, size); | 
|  | kfree(buf); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #ifdef STATS | 
|  | if (pool) | 
|  | pool->allocs++; | 
|  | device_info->total_allocs++; | 
|  | if (device_info->total_allocs % 1000 == 0) | 
|  | print_alloc_stats(device_info); | 
|  | #endif | 
|  |  | 
|  | write_lock_irqsave(&device_info->lock, flags); | 
|  |  | 
|  | list_add(&buf->node, &device_info->safe_buffers); | 
|  |  | 
|  | write_unlock_irqrestore(&device_info->lock, flags); | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | /* determine if a buffer is from our "safe" pool */ | 
|  | static inline struct safe_buffer * | 
|  | find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) | 
|  | { | 
|  | struct safe_buffer *b, *rb = NULL; | 
|  | unsigned long flags; | 
|  |  | 
|  | read_lock_irqsave(&device_info->lock, flags); | 
|  |  | 
|  | list_for_each_entry(b, &device_info->safe_buffers, node) | 
|  | if (b->safe_dma_addr == safe_dma_addr) { | 
|  | rb = b; | 
|  | break; | 
|  | } | 
|  |  | 
|  | read_unlock_irqrestore(&device_info->lock, flags); | 
|  | return rb; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf); | 
|  |  | 
|  | write_lock_irqsave(&device_info->lock, flags); | 
|  |  | 
|  | list_del(&buf->node); | 
|  |  | 
|  | write_unlock_irqrestore(&device_info->lock, flags); | 
|  |  | 
|  | if (buf->pool) | 
|  | dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr); | 
|  | else | 
|  | dma_free_coherent(device_info->dev, buf->size, buf->safe, | 
|  | buf->safe_dma_addr); | 
|  |  | 
|  | kfree(buf); | 
|  | } | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | #ifdef STATS | 
|  | static void print_map_stats(struct dmabounce_device_info *device_info) | 
|  | { | 
|  | dev_info(device_info->dev, | 
|  | "dmabounce: map_op_count=%lu, bounce_count=%lu\n", | 
|  | device_info->map_op_count, device_info->bounce_count); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static inline dma_addr_t | 
|  | map_single(struct device *dev, void *ptr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); | 
|  | dma_addr_t dma_addr; | 
|  | int needs_bounce = 0; | 
|  |  | 
|  | if (device_info) | 
|  | DO_STATS ( device_info->map_op_count++ ); | 
|  |  | 
|  | dma_addr = virt_to_dma(dev, ptr); | 
|  |  | 
|  | if (dev->dma_mask) { | 
|  | unsigned long mask = *dev->dma_mask; | 
|  | unsigned long limit; | 
|  |  | 
|  | limit = (mask + 1) & ~mask; | 
|  | if (limit && size > limit) { | 
|  | dev_err(dev, "DMA mapping too big (requested %#x " | 
|  | "mask %#Lx)\n", size, *dev->dma_mask); | 
|  | return ~0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Figure out if we need to bounce from the DMA mask. | 
|  | */ | 
|  | needs_bounce = (dma_addr | (dma_addr + size - 1)) & ~mask; | 
|  | } | 
|  |  | 
|  | if (device_info && (needs_bounce || dma_needs_bounce(dev, dma_addr, size))) { | 
|  | struct safe_buffer *buf; | 
|  |  | 
|  | buf = alloc_safe_buffer(device_info, ptr, size, dir); | 
|  | if (buf == 0) { | 
|  | dev_err(dev, "%s: unable to map unsafe buffer %p!\n", | 
|  | __func__, ptr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, | 
|  | "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", | 
|  | __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, (void *) buf->safe_dma_addr); | 
|  |  | 
|  | if ((dir == DMA_TO_DEVICE) || | 
|  | (dir == DMA_BIDIRECTIONAL)) { | 
|  | dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", | 
|  | __func__, ptr, buf->safe, size); | 
|  | memcpy(buf->safe, ptr, size); | 
|  | } | 
|  | ptr = buf->safe; | 
|  |  | 
|  | dma_addr = buf->safe_dma_addr; | 
|  | } | 
|  |  | 
|  | consistent_sync(ptr, size, dir); | 
|  |  | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); | 
|  | struct safe_buffer *buf = NULL; | 
|  |  | 
|  | /* | 
|  | * Trying to unmap an invalid mapping | 
|  | */ | 
|  | if (dma_mapping_error(dma_addr)) { | 
|  | dev_err(dev, "Trying to unmap invalid mapping\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (device_info) | 
|  | buf = find_safe_buffer(device_info, dma_addr); | 
|  |  | 
|  | if (buf) { | 
|  | BUG_ON(buf->size != size); | 
|  |  | 
|  | dev_dbg(dev, | 
|  | "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", | 
|  | __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, (void *) buf->safe_dma_addr); | 
|  |  | 
|  | DO_STATS ( device_info->bounce_count++ ); | 
|  |  | 
|  | if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { | 
|  | unsigned long ptr; | 
|  |  | 
|  | dev_dbg(dev, | 
|  | "%s: copy back safe %p to unsafe %p size %d\n", | 
|  | __func__, buf->safe, buf->ptr, size); | 
|  | memcpy(buf->ptr, buf->safe, size); | 
|  |  | 
|  | /* | 
|  | * DMA buffers must have the same cache properties | 
|  | * as if they were really used for DMA - which means | 
|  | * data must be written back to RAM.  Note that | 
|  | * we don't use dmac_flush_range() here for the | 
|  | * bidirectional case because we know the cache | 
|  | * lines will be coherent with the data written. | 
|  | */ | 
|  | ptr = (unsigned long)buf->ptr; | 
|  | dmac_clean_range(ptr, ptr + size); | 
|  | } | 
|  | free_safe_buffer(device_info, buf); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); | 
|  | struct safe_buffer *buf = NULL; | 
|  |  | 
|  | if (device_info) | 
|  | buf = find_safe_buffer(device_info, dma_addr); | 
|  |  | 
|  | if (buf) { | 
|  | /* | 
|  | * Both of these checks from original code need to be | 
|  | * commented out b/c some drivers rely on the following: | 
|  | * | 
|  | * 1) Drivers may map a large chunk of memory into DMA space | 
|  | *    but only sync a small portion of it. Good example is | 
|  | *    allocating a large buffer, mapping it, and then | 
|  | *    breaking it up into small descriptors. No point | 
|  | *    in syncing the whole buffer if you only have to | 
|  | *    touch one descriptor. | 
|  | * | 
|  | * 2) Buffers that are mapped as DMA_BIDIRECTIONAL are | 
|  | *    usually only synced in one dir at a time. | 
|  | * | 
|  | * See drivers/net/eepro100.c for examples of both cases. | 
|  | * | 
|  | * -ds | 
|  | * | 
|  | * BUG_ON(buf->size != size); | 
|  | * BUG_ON(buf->direction != dir); | 
|  | */ | 
|  |  | 
|  | dev_dbg(dev, | 
|  | "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", | 
|  | __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), | 
|  | buf->safe, (void *) buf->safe_dma_addr); | 
|  |  | 
|  | DO_STATS ( device_info->bounce_count++ ); | 
|  |  | 
|  | switch (dir) { | 
|  | case DMA_FROM_DEVICE: | 
|  | dev_dbg(dev, | 
|  | "%s: copy back safe %p to unsafe %p size %d\n", | 
|  | __func__, buf->safe, buf->ptr, size); | 
|  | memcpy(buf->ptr, buf->safe, size); | 
|  | break; | 
|  | case DMA_TO_DEVICE: | 
|  | dev_dbg(dev, | 
|  | "%s: copy out unsafe %p to safe %p, size %d\n", | 
|  | __func__,buf->ptr, buf->safe, size); | 
|  | memcpy(buf->safe, buf->ptr, size); | 
|  | break; | 
|  | case DMA_BIDIRECTIONAL: | 
|  | BUG();	/* is this allowed?  what does it mean? */ | 
|  | default: | 
|  | BUG(); | 
|  | } | 
|  | consistent_sync(buf->safe, size, dir); | 
|  | } else { | 
|  | consistent_sync(dma_to_virt(dev, dma_addr), size, dir); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ************************************************** */ | 
|  |  | 
|  | /* | 
|  | * see if a buffer address is in an 'unsafe' range.  if it is | 
|  | * allocate a 'safe' buffer and copy the unsafe buffer into it. | 
|  | * substitute the safe buffer for the unsafe one. | 
|  | * (basically move the buffer from an unsafe area to a safe one) | 
|  | */ | 
|  | dma_addr_t | 
|  | dma_map_single(struct device *dev, void *ptr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | dma_addr_t dma_addr; | 
|  |  | 
|  | dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", | 
|  | __func__, ptr, size, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | dma_addr = map_single(dev, ptr, size, dir); | 
|  |  | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * see if a mapped address was really a "safe" buffer and if so, copy | 
|  | * the data from the safe buffer back to the unsafe buffer and free up | 
|  | * the safe buffer.  (basically return things back to the way they | 
|  | * should be) | 
|  | */ | 
|  |  | 
|  | void | 
|  | dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", | 
|  | __func__, (void *) dma_addr, size, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | unmap_single(dev, dma_addr, size, dir); | 
|  | } | 
|  |  | 
|  | int | 
|  | dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", | 
|  | __func__, sg, nents, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | for (i = 0; i < nents; i++, sg++) { | 
|  | struct page *page = sg->page; | 
|  | unsigned int offset = sg->offset; | 
|  | unsigned int length = sg->length; | 
|  | void *ptr = page_address(page) + offset; | 
|  |  | 
|  | sg->dma_address = | 
|  | map_single(dev, ptr, length, dir); | 
|  | } | 
|  |  | 
|  | return nents; | 
|  | } | 
|  |  | 
|  | void | 
|  | dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", | 
|  | __func__, sg, nents, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | for (i = 0; i < nents; i++, sg++) { | 
|  | dma_addr_t dma_addr = sg->dma_address; | 
|  | unsigned int length = sg->length; | 
|  |  | 
|  | unmap_single(dev, dma_addr, length, dir); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", | 
|  | __func__, (void *) dma_addr, size, dir); | 
|  |  | 
|  | sync_single(dev, dma_addr, size, dir); | 
|  | } | 
|  |  | 
|  | void | 
|  | dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", | 
|  | __func__, (void *) dma_addr, size, dir); | 
|  |  | 
|  | sync_single(dev, dma_addr, size, dir); | 
|  | } | 
|  |  | 
|  | void | 
|  | dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", | 
|  | __func__, sg, nents, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | for (i = 0; i < nents; i++, sg++) { | 
|  | dma_addr_t dma_addr = sg->dma_address; | 
|  | unsigned int length = sg->length; | 
|  |  | 
|  | sync_single(dev, dma_addr, length, dir); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, | 
|  | enum dma_data_direction dir) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", | 
|  | __func__, sg, nents, dir); | 
|  |  | 
|  | BUG_ON(dir == DMA_NONE); | 
|  |  | 
|  | for (i = 0; i < nents; i++, sg++) { | 
|  | dma_addr_t dma_addr = sg->dma_address; | 
|  | unsigned int length = sg->length; | 
|  |  | 
|  | sync_single(dev, dma_addr, length, dir); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name, | 
|  | unsigned long size) | 
|  | { | 
|  | pool->size = size; | 
|  | DO_STATS(pool->allocs = 0); | 
|  | pool->pool = dma_pool_create(name, dev, size, | 
|  | 0 /* byte alignment */, | 
|  | 0 /* no page-crossing issues */); | 
|  |  | 
|  | return pool->pool ? 0 : -ENOMEM; | 
|  | } | 
|  |  | 
|  | int | 
|  | dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, | 
|  | unsigned long large_buffer_size) | 
|  | { | 
|  | struct dmabounce_device_info *device_info; | 
|  | int ret; | 
|  |  | 
|  | device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); | 
|  | if (!device_info) { | 
|  | printk(KERN_ERR | 
|  | "Could not allocated dmabounce_device_info for %s", | 
|  | dev->bus_id); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = dmabounce_init_pool(&device_info->small, dev, | 
|  | "small_dmabounce_pool", small_buffer_size); | 
|  | if (ret) { | 
|  | dev_err(dev, | 
|  | "dmabounce: could not allocate DMA pool for %ld byte objects\n", | 
|  | small_buffer_size); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (large_buffer_size) { | 
|  | ret = dmabounce_init_pool(&device_info->large, dev, | 
|  | "large_dmabounce_pool", | 
|  | large_buffer_size); | 
|  | if (ret) { | 
|  | dev_err(dev, | 
|  | "dmabounce: could not allocate DMA pool for %ld byte objects\n", | 
|  | large_buffer_size); | 
|  | goto err_destroy; | 
|  | } | 
|  | } | 
|  |  | 
|  | device_info->dev = dev; | 
|  | INIT_LIST_HEAD(&device_info->safe_buffers); | 
|  | rwlock_init(&device_info->lock); | 
|  |  | 
|  | #ifdef STATS | 
|  | device_info->total_allocs = 0; | 
|  | device_info->map_op_count = 0; | 
|  | device_info->bounce_count = 0; | 
|  | #endif | 
|  |  | 
|  | list_add(&device_info->node, &dmabounce_devs); | 
|  |  | 
|  | printk(KERN_INFO "dmabounce: registered device %s on %s bus\n", | 
|  | dev->bus_id, dev->bus->name); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_destroy: | 
|  | dma_pool_destroy(device_info->small.pool); | 
|  | err_free: | 
|  | kfree(device_info); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void | 
|  | dmabounce_unregister_dev(struct device *dev) | 
|  | { | 
|  | struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); | 
|  |  | 
|  | if (!device_info) { | 
|  | printk(KERN_WARNING | 
|  | "%s: Never registered with dmabounce but attempting" \ | 
|  | "to unregister!\n", dev->bus_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!list_empty(&device_info->safe_buffers)) { | 
|  | printk(KERN_ERR | 
|  | "%s: Removing from dmabounce with pending buffers!\n", | 
|  | dev->bus_id); | 
|  | BUG(); | 
|  | } | 
|  |  | 
|  | if (device_info->small.pool) | 
|  | dma_pool_destroy(device_info->small.pool); | 
|  | if (device_info->large.pool) | 
|  | dma_pool_destroy(device_info->large.pool); | 
|  |  | 
|  | #ifdef STATS | 
|  | print_alloc_stats(device_info); | 
|  | print_map_stats(device_info); | 
|  | #endif | 
|  |  | 
|  | list_del(&device_info->node); | 
|  |  | 
|  | kfree(device_info); | 
|  |  | 
|  | printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n", | 
|  | dev->bus_id, dev->bus->name); | 
|  | } | 
|  |  | 
|  |  | 
|  | EXPORT_SYMBOL(dma_map_single); | 
|  | EXPORT_SYMBOL(dma_unmap_single); | 
|  | EXPORT_SYMBOL(dma_map_sg); | 
|  | EXPORT_SYMBOL(dma_unmap_sg); | 
|  | EXPORT_SYMBOL(dma_sync_single); | 
|  | EXPORT_SYMBOL(dma_sync_sg); | 
|  | EXPORT_SYMBOL(dmabounce_register_dev); | 
|  | EXPORT_SYMBOL(dmabounce_unregister_dev); | 
|  |  | 
|  | MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>"); | 
|  | MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows"); | 
|  | MODULE_LICENSE("GPL"); |