|  | /* $Id: pci_common.c,v 1.29 2002/02/01 00:56:03 davem Exp $ | 
|  | * pci_common.c: PCI controller common support. | 
|  | * | 
|  | * Copyright (C) 1999 David S. Miller (davem@redhat.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <asm/pbm.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/of_device.h> | 
|  |  | 
|  | #include "pci_impl.h" | 
|  |  | 
|  | /* Fix self device of BUS and hook it into BUS->self. | 
|  | * The pci_scan_bus does not do this for the host bridge. | 
|  | */ | 
|  | void __init pci_fixup_host_bridge_self(struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *pdev; | 
|  |  | 
|  | list_for_each_entry(pdev, &pbus->devices, bus_list) { | 
|  | if (pdev->class >> 8 == PCI_CLASS_BRIDGE_HOST) { | 
|  | pbus->self = pdev; | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | prom_printf("PCI: Critical error, cannot find host bridge PDEV.\n"); | 
|  | prom_halt(); | 
|  | } | 
|  |  | 
|  | /* Find the OBP PROM device tree node for a PCI device.  */ | 
|  | static struct device_node * __init | 
|  | find_device_prom_node(struct pci_pbm_info *pbm, struct pci_dev *pdev, | 
|  | struct device_node *bus_node, | 
|  | struct linux_prom_pci_registers **pregs, | 
|  | int *nregs) | 
|  | { | 
|  | struct device_node *dp; | 
|  |  | 
|  | *nregs = 0; | 
|  |  | 
|  | /* | 
|  | * Return the PBM's PROM node in case we are it's PCI device, | 
|  | * as the PBM's reg property is different to standard PCI reg | 
|  | * properties. We would delete this device entry otherwise, | 
|  | * which confuses XFree86's device probing... | 
|  | */ | 
|  | if ((pdev->bus->number == pbm->pci_bus->number) && (pdev->devfn == 0) && | 
|  | (pdev->vendor == PCI_VENDOR_ID_SUN) && | 
|  | (pdev->device == PCI_DEVICE_ID_SUN_PBM || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_SCHIZO || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_TOMATILLO || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_SABRE || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD)) | 
|  | return bus_node; | 
|  |  | 
|  | dp = bus_node->child; | 
|  | while (dp) { | 
|  | struct linux_prom_pci_registers *regs; | 
|  | struct property *prop; | 
|  | int len; | 
|  |  | 
|  | prop = of_find_property(dp, "reg", &len); | 
|  | if (!prop) | 
|  | goto do_next_sibling; | 
|  |  | 
|  | regs = prop->value; | 
|  | if (((regs[0].phys_hi >> 8) & 0xff) == pdev->devfn) { | 
|  | *pregs = regs; | 
|  | *nregs = len / sizeof(struct linux_prom_pci_registers); | 
|  | return dp; | 
|  | } | 
|  |  | 
|  | do_next_sibling: | 
|  | dp = dp->sibling; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Older versions of OBP on PCI systems encode 64-bit MEM | 
|  | * space assignments incorrectly, this fixes them up.  We also | 
|  | * take the opportunity here to hide other kinds of bogus | 
|  | * assignments. | 
|  | */ | 
|  | static void __init fixup_obp_assignments(struct pci_dev *pdev, | 
|  | struct pcidev_cookie *pcp) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (pdev->vendor == PCI_VENDOR_ID_AL && | 
|  | (pdev->device == PCI_DEVICE_ID_AL_M7101 || | 
|  | pdev->device == PCI_DEVICE_ID_AL_M1533)) { | 
|  | int i; | 
|  |  | 
|  | /* Zap all of the normal resources, they are | 
|  | * meaningless and generate bogus resource collision | 
|  | * messages.  This is OpenBoot's ill-fated attempt to | 
|  | * represent the implicit resources that these devices | 
|  | * have. | 
|  | */ | 
|  | pcp->num_prom_assignments = 0; | 
|  | for (i = 0; i < 6; i++) { | 
|  | pdev->resource[i].start = | 
|  | pdev->resource[i].end = | 
|  | pdev->resource[i].flags = 0; | 
|  | } | 
|  | pdev->resource[PCI_ROM_RESOURCE].start = | 
|  | pdev->resource[PCI_ROM_RESOURCE].end = | 
|  | pdev->resource[PCI_ROM_RESOURCE].flags = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pcp->num_prom_assignments; i++) { | 
|  | struct linux_prom_pci_registers *ap; | 
|  | int space; | 
|  |  | 
|  | ap = &pcp->prom_assignments[i]; | 
|  | space = ap->phys_hi >> 24; | 
|  | if ((space & 0x3) == 2 && | 
|  | (space & 0x4) != 0) { | 
|  | ap->phys_hi &= ~(0x7 << 24); | 
|  | ap->phys_hi |= 0x3 << 24; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Fill in the PCI device cookie sysdata for the given | 
|  | * PCI device.  This cookie is the means by which one | 
|  | * can get to OBP and PCI controller specific information | 
|  | * for a PCI device. | 
|  | */ | 
|  | static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm, | 
|  | struct pci_dev *pdev, | 
|  | struct device_node *bus_node) | 
|  | { | 
|  | struct linux_prom_pci_registers *pregs = NULL; | 
|  | struct pcidev_cookie *pcp; | 
|  | struct device_node *dp; | 
|  | struct property *prop; | 
|  | int nregs, len; | 
|  |  | 
|  | dp = find_device_prom_node(pbm, pdev, bus_node, | 
|  | &pregs, &nregs); | 
|  | if (!dp) { | 
|  | /* If it is not in the OBP device tree then | 
|  | * there must be a damn good reason for it. | 
|  | * | 
|  | * So what we do is delete the device from the | 
|  | * PCI device tree completely.  This scenario | 
|  | * is seen, for example, on CP1500 for the | 
|  | * second EBUS/HappyMeal pair if the external | 
|  | * connector for it is not present. | 
|  | */ | 
|  | pci_remove_bus_device(pdev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | pcp = kzalloc(sizeof(*pcp), GFP_ATOMIC); | 
|  | if (pcp == NULL) { | 
|  | prom_printf("PCI_COOKIE: Fatal malloc error, aborting...\n"); | 
|  | prom_halt(); | 
|  | } | 
|  | pcp->pbm = pbm; | 
|  | pcp->prom_node = dp; | 
|  | pcp->op = of_find_device_by_node(dp); | 
|  | memcpy(pcp->prom_regs, pregs, | 
|  | nregs * sizeof(struct linux_prom_pci_registers)); | 
|  | pcp->num_prom_regs = nregs; | 
|  |  | 
|  | /* We can't have the pcidev_cookie assignments be just | 
|  | * direct pointers into the property value, since they | 
|  | * are potentially modified by the probing process. | 
|  | */ | 
|  | prop = of_find_property(dp, "assigned-addresses", &len); | 
|  | if (!prop) { | 
|  | pcp->num_prom_assignments = 0; | 
|  | } else { | 
|  | memcpy(pcp->prom_assignments, prop->value, len); | 
|  | pcp->num_prom_assignments = | 
|  | (len / sizeof(pcp->prom_assignments[0])); | 
|  | } | 
|  |  | 
|  | if (strcmp(dp->name, "ebus") == 0) { | 
|  | struct linux_prom_ebus_ranges *erng; | 
|  | int iter; | 
|  |  | 
|  | /* EBUS is special... */ | 
|  | prop = of_find_property(dp, "ranges", &len); | 
|  | if (!prop) { | 
|  | prom_printf("EBUS: Fatal error, no range property\n"); | 
|  | prom_halt(); | 
|  | } | 
|  | erng = prop->value; | 
|  | len = (len / sizeof(erng[0])); | 
|  | for (iter = 0; iter < len; iter++) { | 
|  | struct linux_prom_ebus_ranges *ep = &erng[iter]; | 
|  | struct linux_prom_pci_registers *ap; | 
|  |  | 
|  | ap = &pcp->prom_assignments[iter]; | 
|  |  | 
|  | ap->phys_hi = ep->parent_phys_hi; | 
|  | ap->phys_mid = ep->parent_phys_mid; | 
|  | ap->phys_lo = ep->parent_phys_lo; | 
|  | ap->size_hi = 0; | 
|  | ap->size_lo = ep->size; | 
|  | } | 
|  | pcp->num_prom_assignments = len; | 
|  | } | 
|  |  | 
|  | fixup_obp_assignments(pdev, pcp); | 
|  |  | 
|  | pdev->sysdata = pcp; | 
|  | } | 
|  |  | 
|  | void __init pci_fill_in_pbm_cookies(struct pci_bus *pbus, | 
|  | struct pci_pbm_info *pbm, | 
|  | struct device_node *dp) | 
|  | { | 
|  | struct pci_dev *pdev, *pdev_next; | 
|  | struct pci_bus *this_pbus, *pbus_next; | 
|  |  | 
|  | /* This must be _safe because the cookie fillin | 
|  | routine can delete devices from the tree.  */ | 
|  | list_for_each_entry_safe(pdev, pdev_next, &pbus->devices, bus_list) | 
|  | pdev_cookie_fillin(pbm, pdev, dp); | 
|  |  | 
|  | list_for_each_entry_safe(this_pbus, pbus_next, &pbus->children, node) { | 
|  | struct pcidev_cookie *pcp = this_pbus->self->sysdata; | 
|  |  | 
|  | pci_fill_in_pbm_cookies(this_pbus, pbm, pcp->prom_node); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init bad_assignment(struct pci_dev *pdev, | 
|  | struct linux_prom_pci_registers *ap, | 
|  | struct resource *res, | 
|  | int do_prom_halt) | 
|  | { | 
|  | prom_printf("PCI: Bogus PROM assignment. BUS[%02x] DEVFN[%x]\n", | 
|  | pdev->bus->number, pdev->devfn); | 
|  | if (ap) | 
|  | prom_printf("PCI: phys[%08x:%08x:%08x] size[%08x:%08x]\n", | 
|  | ap->phys_hi, ap->phys_mid, ap->phys_lo, | 
|  | ap->size_hi, ap->size_lo); | 
|  | if (res) | 
|  | prom_printf("PCI: RES[%016lx-->%016lx:(%lx)]\n", | 
|  | res->start, res->end, res->flags); | 
|  | if (do_prom_halt) | 
|  | prom_halt(); | 
|  | } | 
|  |  | 
|  | static struct resource * | 
|  | __init get_root_resource(struct linux_prom_pci_registers *ap, | 
|  | struct pci_pbm_info *pbm) | 
|  | { | 
|  | int space = (ap->phys_hi >> 24) & 3; | 
|  |  | 
|  | switch (space) { | 
|  | case 0: | 
|  | /* Configuration space, silently ignore it. */ | 
|  | return NULL; | 
|  |  | 
|  | case 1: | 
|  | /* 16-bit IO space */ | 
|  | return &pbm->io_space; | 
|  |  | 
|  | case 2: | 
|  | /* 32-bit MEM space */ | 
|  | return &pbm->mem_space; | 
|  |  | 
|  | case 3: | 
|  | /* 64-bit MEM space, these are allocated out of | 
|  | * the 32-bit mem_space range for the PBM, ie. | 
|  | * we just zero out the upper 32-bits. | 
|  | */ | 
|  | return &pbm->mem_space; | 
|  |  | 
|  | default: | 
|  | printk("PCI: What is resource space %x?\n", space); | 
|  | return NULL; | 
|  | }; | 
|  | } | 
|  |  | 
|  | static struct resource * | 
|  | __init get_device_resource(struct linux_prom_pci_registers *ap, | 
|  | struct pci_dev *pdev) | 
|  | { | 
|  | struct resource *res; | 
|  | int breg = (ap->phys_hi & 0xff); | 
|  |  | 
|  | switch (breg) { | 
|  | case  PCI_ROM_ADDRESS: | 
|  | /* Unfortunately I have seen several cases where | 
|  | * buggy FCODE uses a space value of '1' (I/O space) | 
|  | * in the register property for the ROM address | 
|  | * so disable this sanity check for now. | 
|  | */ | 
|  | #if 0 | 
|  | { | 
|  | int space = (ap->phys_hi >> 24) & 3; | 
|  |  | 
|  | /* It had better be MEM space. */ | 
|  | if (space != 2) | 
|  | bad_assignment(pdev, ap, NULL, 0); | 
|  | } | 
|  | #endif | 
|  | res = &pdev->resource[PCI_ROM_RESOURCE]; | 
|  | break; | 
|  |  | 
|  | case PCI_BASE_ADDRESS_0: | 
|  | case PCI_BASE_ADDRESS_1: | 
|  | case PCI_BASE_ADDRESS_2: | 
|  | case PCI_BASE_ADDRESS_3: | 
|  | case PCI_BASE_ADDRESS_4: | 
|  | case PCI_BASE_ADDRESS_5: | 
|  | res = &pdev->resource[(breg - PCI_BASE_ADDRESS_0) / 4]; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | bad_assignment(pdev, ap, NULL, 0); | 
|  | res = NULL; | 
|  | break; | 
|  | }; | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int __init pdev_resource_collisions_expected(struct pci_dev *pdev) | 
|  | { | 
|  | if (pdev->vendor != PCI_VENDOR_ID_SUN) | 
|  | return 0; | 
|  |  | 
|  | if (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_RIO_1394 || | 
|  | pdev->device == PCI_DEVICE_ID_SUN_RIO_USB) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __init pdev_record_assignments(struct pci_pbm_info *pbm, | 
|  | struct pci_dev *pdev) | 
|  | { | 
|  | struct pcidev_cookie *pcp = pdev->sysdata; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < pcp->num_prom_assignments; i++) { | 
|  | struct linux_prom_pci_registers *ap; | 
|  | struct resource *root, *res; | 
|  |  | 
|  | /* The format of this property is specified in | 
|  | * the PCI Bus Binding to IEEE1275-1994. | 
|  | */ | 
|  | ap = &pcp->prom_assignments[i]; | 
|  | root = get_root_resource(ap, pbm); | 
|  | res = get_device_resource(ap, pdev); | 
|  | if (root == NULL || res == NULL || | 
|  | res->flags == 0) | 
|  | continue; | 
|  |  | 
|  | /* Ok we know which resource this PROM assignment is | 
|  | * for, sanity check it. | 
|  | */ | 
|  | if ((res->start & 0xffffffffUL) != ap->phys_lo) | 
|  | bad_assignment(pdev, ap, res, 1); | 
|  |  | 
|  | /* If it is a 64-bit MEM space assignment, verify that | 
|  | * the resource is too and that the upper 32-bits match. | 
|  | */ | 
|  | if (((ap->phys_hi >> 24) & 3) == 3) { | 
|  | if (((res->flags & IORESOURCE_MEM) == 0) || | 
|  | ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) | 
|  | != PCI_BASE_ADDRESS_MEM_TYPE_64)) | 
|  | bad_assignment(pdev, ap, res, 1); | 
|  | if ((res->start >> 32) != ap->phys_mid) | 
|  | bad_assignment(pdev, ap, res, 1); | 
|  |  | 
|  | /* PBM cannot generate cpu initiated PIOs | 
|  | * to the full 64-bit space.  Therefore the | 
|  | * upper 32-bits better be zero.  If it is | 
|  | * not, just skip it and we will assign it | 
|  | * properly ourselves. | 
|  | */ | 
|  | if ((res->start >> 32) != 0UL) { | 
|  | printk(KERN_ERR "PCI: OBP assigns out of range MEM address " | 
|  | "%016lx for region %ld on device %s\n", | 
|  | res->start, (res - &pdev->resource[0]), pci_name(pdev)); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Adjust the resource into the physical address space | 
|  | * of this PBM. | 
|  | */ | 
|  | pbm->parent->resource_adjust(pdev, res, root); | 
|  |  | 
|  | if (request_resource(root, res) < 0) { | 
|  | /* OK, there is some conflict.  But this is fine | 
|  | * since we'll reassign it in the fixup pass. | 
|  | * | 
|  | * We notify the user that OBP made an error if it | 
|  | * is a case we don't expect. | 
|  | */ | 
|  | if (!pdev_resource_collisions_expected(pdev)) { | 
|  | printk(KERN_ERR "PCI: Address space collision on region %ld " | 
|  | "[%016lx:%016lx] of device %s\n", | 
|  | (res - &pdev->resource[0]), | 
|  | res->start, res->end, | 
|  | pci_name(pdev)); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init pci_record_assignments(struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(dev, &pbus->devices, bus_list) | 
|  | pdev_record_assignments(pbm, dev); | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_record_assignments(pbm, bus); | 
|  | } | 
|  |  | 
|  | /* Return non-zero if PDEV has implicit I/O resources even | 
|  | * though it may not have an I/O base address register | 
|  | * active. | 
|  | */ | 
|  | static int __init has_implicit_io(struct pci_dev *pdev) | 
|  | { | 
|  | int class = pdev->class >> 8; | 
|  |  | 
|  | if (class == PCI_CLASS_NOT_DEFINED || | 
|  | class == PCI_CLASS_NOT_DEFINED_VGA || | 
|  | class == PCI_CLASS_STORAGE_IDE || | 
|  | (pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __init pdev_assign_unassigned(struct pci_pbm_info *pbm, | 
|  | struct pci_dev *pdev) | 
|  | { | 
|  | u32 reg; | 
|  | u16 cmd; | 
|  | int i, io_seen, mem_seen; | 
|  |  | 
|  | io_seen = mem_seen = 0; | 
|  | for (i = 0; i < PCI_NUM_RESOURCES; i++) { | 
|  | struct resource *root, *res; | 
|  | unsigned long size, min, max, align; | 
|  |  | 
|  | res = &pdev->resource[i]; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) | 
|  | io_seen++; | 
|  | else if (res->flags & IORESOURCE_MEM) | 
|  | mem_seen++; | 
|  |  | 
|  | /* If it is already assigned or the resource does | 
|  | * not exist, there is nothing to do. | 
|  | */ | 
|  | if (res->parent != NULL || res->flags == 0UL) | 
|  | continue; | 
|  |  | 
|  | /* Determine the root we allocate from. */ | 
|  | if (res->flags & IORESOURCE_IO) { | 
|  | root = &pbm->io_space; | 
|  | min = root->start + 0x400UL; | 
|  | max = root->end; | 
|  | } else { | 
|  | root = &pbm->mem_space; | 
|  | min = root->start; | 
|  | max = min + 0x80000000UL; | 
|  | } | 
|  |  | 
|  | size = res->end - res->start; | 
|  | align = size + 1; | 
|  | if (allocate_resource(root, res, size + 1, min, max, align, NULL, NULL) < 0) { | 
|  | /* uh oh */ | 
|  | prom_printf("PCI: Failed to allocate resource %d for %s\n", | 
|  | i, pci_name(pdev)); | 
|  | prom_halt(); | 
|  | } | 
|  |  | 
|  | /* Update PCI config space. */ | 
|  | pbm->parent->base_address_update(pdev, i); | 
|  | } | 
|  |  | 
|  | /* Special case, disable the ROM.  Several devices | 
|  | * act funny (ie. do not respond to memory space writes) | 
|  | * when it is left enabled.  A good example are Qlogic,ISP | 
|  | * adapters. | 
|  | */ | 
|  | pci_read_config_dword(pdev, PCI_ROM_ADDRESS, ®); | 
|  | reg &= ~PCI_ROM_ADDRESS_ENABLE; | 
|  | pci_write_config_dword(pdev, PCI_ROM_ADDRESS, reg); | 
|  |  | 
|  | /* If we saw I/O or MEM resources, enable appropriate | 
|  | * bits in PCI command register. | 
|  | */ | 
|  | if (io_seen || mem_seen) { | 
|  | pci_read_config_word(pdev, PCI_COMMAND, &cmd); | 
|  | if (io_seen || has_implicit_io(pdev)) | 
|  | cmd |= PCI_COMMAND_IO; | 
|  | if (mem_seen) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | pci_write_config_word(pdev, PCI_COMMAND, cmd); | 
|  | } | 
|  |  | 
|  | /* If this is a PCI bridge or an IDE controller, | 
|  | * enable bus mastering.  In the former case also | 
|  | * set the cache line size correctly. | 
|  | */ | 
|  | if (((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) || | 
|  | (((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) && | 
|  | ((pdev->class & 0x80) != 0))) { | 
|  | pci_read_config_word(pdev, PCI_COMMAND, &cmd); | 
|  | cmd |= PCI_COMMAND_MASTER; | 
|  | pci_write_config_word(pdev, PCI_COMMAND, cmd); | 
|  |  | 
|  | if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) | 
|  | pci_write_config_byte(pdev, | 
|  | PCI_CACHE_LINE_SIZE, | 
|  | (64 / sizeof(u32))); | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init pci_assign_unassigned(struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(dev, &pbus->devices, bus_list) | 
|  | pdev_assign_unassigned(pbm, dev); | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_assign_unassigned(pbm, bus); | 
|  | } | 
|  |  | 
|  | static void __init pdev_fixup_irq(struct pci_dev *pdev) | 
|  | { | 
|  | struct pcidev_cookie *pcp = pdev->sysdata; | 
|  | struct of_device *op = pcp->op; | 
|  |  | 
|  | if (op->irqs[0] == 0xffffffff) { | 
|  | pdev->irq = PCI_IRQ_NONE; | 
|  | return; | 
|  | } | 
|  |  | 
|  | pdev->irq = op->irqs[0]; | 
|  |  | 
|  | pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, | 
|  | pdev->irq & PCI_IRQ_INO); | 
|  | } | 
|  |  | 
|  | void __init pci_fixup_irq(struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(dev, &pbus->devices, bus_list) | 
|  | pdev_fixup_irq(dev); | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_fixup_irq(pbm, bus); | 
|  | } | 
|  |  | 
|  | static void pdev_setup_busmastering(struct pci_dev *pdev, int is_66mhz) | 
|  | { | 
|  | u16 cmd; | 
|  | u8 hdr_type, min_gnt, ltimer; | 
|  |  | 
|  | pci_read_config_word(pdev, PCI_COMMAND, &cmd); | 
|  | cmd |= PCI_COMMAND_MASTER; | 
|  | pci_write_config_word(pdev, PCI_COMMAND, cmd); | 
|  |  | 
|  | /* Read it back, if the mastering bit did not | 
|  | * get set, the device does not support bus | 
|  | * mastering so we have nothing to do here. | 
|  | */ | 
|  | pci_read_config_word(pdev, PCI_COMMAND, &cmd); | 
|  | if ((cmd & PCI_COMMAND_MASTER) == 0) | 
|  | return; | 
|  |  | 
|  | /* Set correct cache line size, 64-byte on all | 
|  | * Sparc64 PCI systems.  Note that the value is | 
|  | * measured in 32-bit words. | 
|  | */ | 
|  | pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, | 
|  | 64 / sizeof(u32)); | 
|  |  | 
|  | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr_type); | 
|  | hdr_type &= ~0x80; | 
|  | if (hdr_type != PCI_HEADER_TYPE_NORMAL) | 
|  | return; | 
|  |  | 
|  | /* If the latency timer is already programmed with a non-zero | 
|  | * value, assume whoever set it (OBP or whoever) knows what | 
|  | * they are doing. | 
|  | */ | 
|  | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, <imer); | 
|  | if (ltimer != 0) | 
|  | return; | 
|  |  | 
|  | /* XXX Since I'm tipping off the min grant value to | 
|  | * XXX choose a suitable latency timer value, I also | 
|  | * XXX considered making use of the max latency value | 
|  | * XXX as well.  Unfortunately I've seen too many bogusly | 
|  | * XXX low settings for it to the point where it lacks | 
|  | * XXX any usefulness.  In one case, an ethernet card | 
|  | * XXX claimed a min grant of 10 and a max latency of 5. | 
|  | * XXX Now, if I had two such cards on the same bus I | 
|  | * XXX could not set the desired burst period (calculated | 
|  | * XXX from min grant) without violating the max latency | 
|  | * XXX bound.  Duh... | 
|  | * XXX | 
|  | * XXX I blame dumb PC bios implementors for stuff like | 
|  | * XXX this, most of them don't even try to do something | 
|  | * XXX sensible with latency timer values and just set some | 
|  | * XXX default value (usually 32) into every device. | 
|  | */ | 
|  |  | 
|  | pci_read_config_byte(pdev, PCI_MIN_GNT, &min_gnt); | 
|  |  | 
|  | if (min_gnt == 0) { | 
|  | /* If no min_gnt setting then use a default | 
|  | * value. | 
|  | */ | 
|  | if (is_66mhz) | 
|  | ltimer = 16; | 
|  | else | 
|  | ltimer = 32; | 
|  | } else { | 
|  | int shift_factor; | 
|  |  | 
|  | if (is_66mhz) | 
|  | shift_factor = 2; | 
|  | else | 
|  | shift_factor = 3; | 
|  |  | 
|  | /* Use a default value when the min_gnt value | 
|  | * is erroneously high. | 
|  | */ | 
|  | if (((unsigned int) min_gnt << shift_factor) > 512 || | 
|  | ((min_gnt << shift_factor) & 0xff) == 0) { | 
|  | ltimer = 8 << shift_factor; | 
|  | } else { | 
|  | ltimer = min_gnt << shift_factor; | 
|  | } | 
|  | } | 
|  |  | 
|  | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ltimer); | 
|  | } | 
|  |  | 
|  | void pci_determine_66mhz_disposition(struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *pdev; | 
|  | int all_are_66mhz; | 
|  | u16 status; | 
|  |  | 
|  | if (pbm->is_66mhz_capable == 0) { | 
|  | all_are_66mhz = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | all_are_66mhz = 1; | 
|  | list_for_each_entry(pdev, &pbus->devices, bus_list) { | 
|  | pci_read_config_word(pdev, PCI_STATUS, &status); | 
|  | if (!(status & PCI_STATUS_66MHZ)) { | 
|  | all_are_66mhz = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | out: | 
|  | pbm->all_devs_66mhz = all_are_66mhz; | 
|  |  | 
|  | printk("PCI%d(PBM%c): Bus running at %dMHz\n", | 
|  | pbm->parent->index, | 
|  | (pbm == &pbm->parent->pbm_A) ? 'A' : 'B', | 
|  | (all_are_66mhz ? 66 : 33)); | 
|  | } | 
|  |  | 
|  | void pci_setup_busmastering(struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  | struct pci_bus *bus; | 
|  | int is_66mhz; | 
|  |  | 
|  | is_66mhz = pbm->is_66mhz_capable && pbm->all_devs_66mhz; | 
|  |  | 
|  | list_for_each_entry(dev, &pbus->devices, bus_list) | 
|  | pdev_setup_busmastering(dev, is_66mhz); | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_setup_busmastering(pbm, bus); | 
|  | } | 
|  |  | 
|  | void pci_register_legacy_regions(struct resource *io_res, | 
|  | struct resource *mem_res) | 
|  | { | 
|  | struct resource *p; | 
|  |  | 
|  | /* VGA Video RAM. */ | 
|  | p = kzalloc(sizeof(*p), GFP_KERNEL); | 
|  | if (!p) | 
|  | return; | 
|  |  | 
|  | p->name = "Video RAM area"; | 
|  | p->start = mem_res->start + 0xa0000UL; | 
|  | p->end = p->start + 0x1ffffUL; | 
|  | p->flags = IORESOURCE_BUSY; | 
|  | request_resource(mem_res, p); | 
|  |  | 
|  | p = kzalloc(sizeof(*p), GFP_KERNEL); | 
|  | if (!p) | 
|  | return; | 
|  |  | 
|  | p->name = "System ROM"; | 
|  | p->start = mem_res->start + 0xf0000UL; | 
|  | p->end = p->start + 0xffffUL; | 
|  | p->flags = IORESOURCE_BUSY; | 
|  | request_resource(mem_res, p); | 
|  |  | 
|  | p = kzalloc(sizeof(*p), GFP_KERNEL); | 
|  | if (!p) | 
|  | return; | 
|  |  | 
|  | p->name = "Video ROM"; | 
|  | p->start = mem_res->start + 0xc0000UL; | 
|  | p->end = p->start + 0x7fffUL; | 
|  | p->flags = IORESOURCE_BUSY; | 
|  | request_resource(mem_res, p); | 
|  | } | 
|  |  | 
|  | /* Generic helper routines for PCI error reporting. */ | 
|  | void pci_scan_for_target_abort(struct pci_controller_info *p, | 
|  | struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *pdev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(pdev, &pbus->devices, bus_list) { | 
|  | u16 status, error_bits; | 
|  |  | 
|  | pci_read_config_word(pdev, PCI_STATUS, &status); | 
|  | error_bits = | 
|  | (status & (PCI_STATUS_SIG_TARGET_ABORT | | 
|  | PCI_STATUS_REC_TARGET_ABORT)); | 
|  | if (error_bits) { | 
|  | pci_write_config_word(pdev, PCI_STATUS, error_bits); | 
|  | printk("PCI%d(PBM%c): Device [%s] saw Target Abort [%016x]\n", | 
|  | p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'), | 
|  | pci_name(pdev), status); | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_scan_for_target_abort(p, pbm, bus); | 
|  | } | 
|  |  | 
|  | void pci_scan_for_master_abort(struct pci_controller_info *p, | 
|  | struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *pdev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(pdev, &pbus->devices, bus_list) { | 
|  | u16 status, error_bits; | 
|  |  | 
|  | pci_read_config_word(pdev, PCI_STATUS, &status); | 
|  | error_bits = | 
|  | (status & (PCI_STATUS_REC_MASTER_ABORT)); | 
|  | if (error_bits) { | 
|  | pci_write_config_word(pdev, PCI_STATUS, error_bits); | 
|  | printk("PCI%d(PBM%c): Device [%s] received Master Abort [%016x]\n", | 
|  | p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'), | 
|  | pci_name(pdev), status); | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_scan_for_master_abort(p, pbm, bus); | 
|  | } | 
|  |  | 
|  | void pci_scan_for_parity_error(struct pci_controller_info *p, | 
|  | struct pci_pbm_info *pbm, | 
|  | struct pci_bus *pbus) | 
|  | { | 
|  | struct pci_dev *pdev; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | list_for_each_entry(pdev, &pbus->devices, bus_list) { | 
|  | u16 status, error_bits; | 
|  |  | 
|  | pci_read_config_word(pdev, PCI_STATUS, &status); | 
|  | error_bits = | 
|  | (status & (PCI_STATUS_PARITY | | 
|  | PCI_STATUS_DETECTED_PARITY)); | 
|  | if (error_bits) { | 
|  | pci_write_config_word(pdev, PCI_STATUS, error_bits); | 
|  | printk("PCI%d(PBM%c): Device [%s] saw Parity Error [%016x]\n", | 
|  | p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'), | 
|  | pci_name(pdev), status); | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry(bus, &pbus->children, node) | 
|  | pci_scan_for_parity_error(p, pbm, bus); | 
|  | } |