|  | /* | 
|  | * CIPSO - Commercial IP Security Option | 
|  | * | 
|  | * This is an implementation of the CIPSO 2.2 protocol as specified in | 
|  | * draft-ietf-cipso-ipsecurity-01.txt with additional tag types as found in | 
|  | * FIPS-188, copies of both documents can be found in the Documentation | 
|  | * directory.  While CIPSO never became a full IETF RFC standard many vendors | 
|  | * have chosen to adopt the protocol and over the years it has become a | 
|  | * de-facto standard for labeled networking. | 
|  | * | 
|  | * Author: Paul Moore <paul.moore@hp.com> | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * (c) Copyright Hewlett-Packard Development Company, L.P., 2006 | 
|  | * | 
|  | * This program is free software;  you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY;  without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See | 
|  | * the GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program;  if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/jhash.h> | 
|  | #include <net/ip.h> | 
|  | #include <net/icmp.h> | 
|  | #include <net/tcp.h> | 
|  | #include <net/netlabel.h> | 
|  | #include <net/cipso_ipv4.h> | 
|  | #include <asm/bug.h> | 
|  |  | 
|  | struct cipso_v4_domhsh_entry { | 
|  | char *domain; | 
|  | u32 valid; | 
|  | struct list_head list; | 
|  | struct rcu_head rcu; | 
|  | }; | 
|  |  | 
|  | /* List of available DOI definitions */ | 
|  | /* XXX - Updates should be minimal so having a single lock for the | 
|  | * cipso_v4_doi_list and the cipso_v4_doi_list->dom_list should be | 
|  | * okay. */ | 
|  | /* XXX - This currently assumes a minimal number of different DOIs in use, | 
|  | * if in practice there are a lot of different DOIs this list should | 
|  | * probably be turned into a hash table or something similar so we | 
|  | * can do quick lookups. */ | 
|  | static DEFINE_SPINLOCK(cipso_v4_doi_list_lock); | 
|  | static struct list_head cipso_v4_doi_list = LIST_HEAD_INIT(cipso_v4_doi_list); | 
|  |  | 
|  | /* Label mapping cache */ | 
|  | int cipso_v4_cache_enabled = 1; | 
|  | int cipso_v4_cache_bucketsize = 10; | 
|  | #define CIPSO_V4_CACHE_BUCKETBITS     7 | 
|  | #define CIPSO_V4_CACHE_BUCKETS        (1 << CIPSO_V4_CACHE_BUCKETBITS) | 
|  | #define CIPSO_V4_CACHE_REORDERLIMIT   10 | 
|  | struct cipso_v4_map_cache_bkt { | 
|  | spinlock_t lock; | 
|  | u32 size; | 
|  | struct list_head list; | 
|  | }; | 
|  | struct cipso_v4_map_cache_entry { | 
|  | u32 hash; | 
|  | unsigned char *key; | 
|  | size_t key_len; | 
|  |  | 
|  | struct netlbl_lsm_cache lsm_data; | 
|  |  | 
|  | u32 activity; | 
|  | struct list_head list; | 
|  | }; | 
|  | static struct cipso_v4_map_cache_bkt *cipso_v4_cache = NULL; | 
|  |  | 
|  | /* Restricted bitmap (tag #1) flags */ | 
|  | int cipso_v4_rbm_optfmt = 0; | 
|  | int cipso_v4_rbm_strictvalid = 1; | 
|  |  | 
|  | /* | 
|  | * Helper Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_bitmap_walk - Walk a bitmap looking for a bit | 
|  | * @bitmap: the bitmap | 
|  | * @bitmap_len: length in bits | 
|  | * @offset: starting offset | 
|  | * @state: if non-zero, look for a set (1) bit else look for a cleared (0) bit | 
|  | * | 
|  | * Description: | 
|  | * Starting at @offset, walk the bitmap from left to right until either the | 
|  | * desired bit is found or we reach the end.  Return the bit offset, -1 if | 
|  | * not found, or -2 if error. | 
|  | */ | 
|  | static int cipso_v4_bitmap_walk(const unsigned char *bitmap, | 
|  | u32 bitmap_len, | 
|  | u32 offset, | 
|  | u8 state) | 
|  | { | 
|  | u32 bit_spot; | 
|  | u32 byte_offset; | 
|  | unsigned char bitmask; | 
|  | unsigned char byte; | 
|  |  | 
|  | /* gcc always rounds to zero when doing integer division */ | 
|  | byte_offset = offset / 8; | 
|  | byte = bitmap[byte_offset]; | 
|  | bit_spot = offset; | 
|  | bitmask = 0x80 >> (offset % 8); | 
|  |  | 
|  | while (bit_spot < bitmap_len) { | 
|  | if ((state && (byte & bitmask) == bitmask) || | 
|  | (state == 0 && (byte & bitmask) == 0)) | 
|  | return bit_spot; | 
|  |  | 
|  | bit_spot++; | 
|  | bitmask >>= 1; | 
|  | if (bitmask == 0) { | 
|  | byte = bitmap[++byte_offset]; | 
|  | bitmask = 0x80; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_bitmap_setbit - Sets a single bit in a bitmap | 
|  | * @bitmap: the bitmap | 
|  | * @bit: the bit | 
|  | * @state: if non-zero, set the bit (1) else clear the bit (0) | 
|  | * | 
|  | * Description: | 
|  | * Set a single bit in the bitmask.  Returns zero on success, negative values | 
|  | * on error. | 
|  | */ | 
|  | static void cipso_v4_bitmap_setbit(unsigned char *bitmap, | 
|  | u32 bit, | 
|  | u8 state) | 
|  | { | 
|  | u32 byte_spot; | 
|  | u8 bitmask; | 
|  |  | 
|  | /* gcc always rounds to zero when doing integer division */ | 
|  | byte_spot = bit / 8; | 
|  | bitmask = 0x80 >> (bit % 8); | 
|  | if (state) | 
|  | bitmap[byte_spot] |= bitmask; | 
|  | else | 
|  | bitmap[byte_spot] &= ~bitmask; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_domhsh_free - Frees a domain list entry | 
|  | * @entry: the entry's RCU field | 
|  | * | 
|  | * Description: | 
|  | * This function is designed to be used as a callback to the call_rcu() | 
|  | * function so that the memory allocated to a domain list entry can be released | 
|  | * safely. | 
|  | * | 
|  | */ | 
|  | static void cipso_v4_doi_domhsh_free(struct rcu_head *entry) | 
|  | { | 
|  | struct cipso_v4_domhsh_entry *ptr; | 
|  |  | 
|  | ptr = container_of(entry, struct cipso_v4_domhsh_entry, rcu); | 
|  | kfree(ptr->domain); | 
|  | kfree(ptr); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_entry_free - Frees a cache entry | 
|  | * @entry: the entry to free | 
|  | * | 
|  | * Description: | 
|  | * This function frees the memory associated with a cache entry. | 
|  | * | 
|  | */ | 
|  | static void cipso_v4_cache_entry_free(struct cipso_v4_map_cache_entry *entry) | 
|  | { | 
|  | if (entry->lsm_data.free) | 
|  | entry->lsm_data.free(entry->lsm_data.data); | 
|  | kfree(entry->key); | 
|  | kfree(entry); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cache_hash - Hashing function for the CIPSO cache | 
|  | * @key: the hash key | 
|  | * @key_len: the length of the key in bytes | 
|  | * | 
|  | * Description: | 
|  | * The CIPSO tag hashing function.  Returns a 32-bit hash value. | 
|  | * | 
|  | */ | 
|  | static u32 cipso_v4_map_cache_hash(const unsigned char *key, u32 key_len) | 
|  | { | 
|  | return jhash(key, key_len, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Label Mapping Cache Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_init - Initialize the CIPSO cache | 
|  | * | 
|  | * Description: | 
|  | * Initializes the CIPSO label mapping cache, this function should be called | 
|  | * before any of the other functions defined in this file.  Returns zero on | 
|  | * success, negative values on error. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_cache_init(void) | 
|  | { | 
|  | u32 iter; | 
|  |  | 
|  | cipso_v4_cache = kcalloc(CIPSO_V4_CACHE_BUCKETS, | 
|  | sizeof(struct cipso_v4_map_cache_bkt), | 
|  | GFP_KERNEL); | 
|  | if (cipso_v4_cache == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (iter = 0; iter < CIPSO_V4_CACHE_BUCKETS; iter++) { | 
|  | spin_lock_init(&cipso_v4_cache[iter].lock); | 
|  | cipso_v4_cache[iter].size = 0; | 
|  | INIT_LIST_HEAD(&cipso_v4_cache[iter].list); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_invalidate - Invalidates the current CIPSO cache | 
|  | * | 
|  | * Description: | 
|  | * Invalidates and frees any entries in the CIPSO cache.  Returns zero on | 
|  | * success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | void cipso_v4_cache_invalidate(void) | 
|  | { | 
|  | struct cipso_v4_map_cache_entry *entry, *tmp_entry; | 
|  | u32 iter; | 
|  |  | 
|  | for (iter = 0; iter < CIPSO_V4_CACHE_BUCKETS; iter++) { | 
|  | spin_lock_bh(&cipso_v4_cache[iter].lock); | 
|  | list_for_each_entry_safe(entry, | 
|  | tmp_entry, | 
|  | &cipso_v4_cache[iter].list, list) { | 
|  | list_del(&entry->list); | 
|  | cipso_v4_cache_entry_free(entry); | 
|  | } | 
|  | cipso_v4_cache[iter].size = 0; | 
|  | spin_unlock_bh(&cipso_v4_cache[iter].lock); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_check - Check the CIPSO cache for a label mapping | 
|  | * @key: the buffer to check | 
|  | * @key_len: buffer length in bytes | 
|  | * @secattr: the security attribute struct to use | 
|  | * | 
|  | * Description: | 
|  | * This function checks the cache to see if a label mapping already exists for | 
|  | * the given key.  If there is a match then the cache is adjusted and the | 
|  | * @secattr struct is populated with the correct LSM security attributes.  The | 
|  | * cache is adjusted in the following manner if the entry is not already the | 
|  | * first in the cache bucket: | 
|  | * | 
|  | *  1. The cache entry's activity counter is incremented | 
|  | *  2. The previous (higher ranking) entry's activity counter is decremented | 
|  | *  3. If the difference between the two activity counters is geater than | 
|  | *     CIPSO_V4_CACHE_REORDERLIMIT the two entries are swapped | 
|  | * | 
|  | * Returns zero on success, -ENOENT for a cache miss, and other negative values | 
|  | * on error. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_cache_check(const unsigned char *key, | 
|  | u32 key_len, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | u32 bkt; | 
|  | struct cipso_v4_map_cache_entry *entry; | 
|  | struct cipso_v4_map_cache_entry *prev_entry = NULL; | 
|  | u32 hash; | 
|  |  | 
|  | if (!cipso_v4_cache_enabled) | 
|  | return -ENOENT; | 
|  |  | 
|  | hash = cipso_v4_map_cache_hash(key, key_len); | 
|  | bkt = hash & (CIPSO_V4_CACHE_BUCKETBITS - 1); | 
|  | spin_lock_bh(&cipso_v4_cache[bkt].lock); | 
|  | list_for_each_entry(entry, &cipso_v4_cache[bkt].list, list) { | 
|  | if (entry->hash == hash && | 
|  | entry->key_len == key_len && | 
|  | memcmp(entry->key, key, key_len) == 0) { | 
|  | entry->activity += 1; | 
|  | secattr->cache.free = entry->lsm_data.free; | 
|  | secattr->cache.data = entry->lsm_data.data; | 
|  | if (prev_entry == NULL) { | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (prev_entry->activity > 0) | 
|  | prev_entry->activity -= 1; | 
|  | if (entry->activity > prev_entry->activity && | 
|  | entry->activity - prev_entry->activity > | 
|  | CIPSO_V4_CACHE_REORDERLIMIT) { | 
|  | __list_del(entry->list.prev, entry->list.next); | 
|  | __list_add(&entry->list, | 
|  | prev_entry->list.prev, | 
|  | &prev_entry->list); | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  | return 0; | 
|  | } | 
|  | prev_entry = entry; | 
|  | } | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_add - Add an entry to the CIPSO cache | 
|  | * @skb: the packet | 
|  | * @secattr: the packet's security attributes | 
|  | * | 
|  | * Description: | 
|  | * Add a new entry into the CIPSO label mapping cache.  Add the new entry to | 
|  | * head of the cache bucket's list, if the cache bucket is out of room remove | 
|  | * the last entry in the list first.  It is important to note that there is | 
|  | * currently no checking for duplicate keys.  Returns zero on success, | 
|  | * negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_cache_add(const struct sk_buff *skb, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -EPERM; | 
|  | u32 bkt; | 
|  | struct cipso_v4_map_cache_entry *entry = NULL; | 
|  | struct cipso_v4_map_cache_entry *old_entry = NULL; | 
|  | unsigned char *cipso_ptr; | 
|  | u32 cipso_ptr_len; | 
|  |  | 
|  | if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0) | 
|  | return 0; | 
|  |  | 
|  | cipso_ptr = CIPSO_V4_OPTPTR(skb); | 
|  | cipso_ptr_len = cipso_ptr[1]; | 
|  |  | 
|  | entry = kzalloc(sizeof(*entry), GFP_ATOMIC); | 
|  | if (entry == NULL) | 
|  | return -ENOMEM; | 
|  | entry->key = kmalloc(cipso_ptr_len, GFP_ATOMIC); | 
|  | if (entry->key == NULL) { | 
|  | ret_val = -ENOMEM; | 
|  | goto cache_add_failure; | 
|  | } | 
|  | memcpy(entry->key, cipso_ptr, cipso_ptr_len); | 
|  | entry->key_len = cipso_ptr_len; | 
|  | entry->hash = cipso_v4_map_cache_hash(cipso_ptr, cipso_ptr_len); | 
|  | entry->lsm_data.free = secattr->cache.free; | 
|  | entry->lsm_data.data = secattr->cache.data; | 
|  |  | 
|  | bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETBITS - 1); | 
|  | spin_lock_bh(&cipso_v4_cache[bkt].lock); | 
|  | if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) { | 
|  | list_add(&entry->list, &cipso_v4_cache[bkt].list); | 
|  | cipso_v4_cache[bkt].size += 1; | 
|  | } else { | 
|  | old_entry = list_entry(cipso_v4_cache[bkt].list.prev, | 
|  | struct cipso_v4_map_cache_entry, list); | 
|  | list_del(&old_entry->list); | 
|  | list_add(&entry->list, &cipso_v4_cache[bkt].list); | 
|  | cipso_v4_cache_entry_free(old_entry); | 
|  | } | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | cache_add_failure: | 
|  | if (entry) | 
|  | cipso_v4_cache_entry_free(entry); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * DOI List Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_search - Searches for a DOI definition | 
|  | * @doi: the DOI to search for | 
|  | * | 
|  | * Description: | 
|  | * Search the DOI definition list for a DOI definition with a DOI value that | 
|  | * matches @doi.  The caller is responsibile for calling rcu_read_[un]lock(). | 
|  | * Returns a pointer to the DOI definition on success and NULL on failure. | 
|  | */ | 
|  | static struct cipso_v4_doi *cipso_v4_doi_search(u32 doi) | 
|  | { | 
|  | struct cipso_v4_doi *iter; | 
|  |  | 
|  | list_for_each_entry_rcu(iter, &cipso_v4_doi_list, list) | 
|  | if (iter->doi == doi && iter->valid) | 
|  | return iter; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_add - Add a new DOI to the CIPSO protocol engine | 
|  | * @doi_def: the DOI structure | 
|  | * | 
|  | * Description: | 
|  | * The caller defines a new DOI for use by the CIPSO engine and calls this | 
|  | * function to add it to the list of acceptable domains.  The caller must | 
|  | * ensure that the mapping table specified in @doi_def->map meets all of the | 
|  | * requirements of the mapping type (see cipso_ipv4.h for details).  Returns | 
|  | * zero on success and non-zero on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_add(struct cipso_v4_doi *doi_def) | 
|  | { | 
|  | if (doi_def == NULL || doi_def->doi == CIPSO_V4_DOI_UNKNOWN) | 
|  | return -EINVAL; | 
|  |  | 
|  | doi_def->valid = 1; | 
|  | INIT_RCU_HEAD(&doi_def->rcu); | 
|  | INIT_LIST_HEAD(&doi_def->dom_list); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (cipso_v4_doi_search(doi_def->doi) != NULL) | 
|  | goto doi_add_failure_rlock; | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | if (cipso_v4_doi_search(doi_def->doi) != NULL) | 
|  | goto doi_add_failure_slock; | 
|  | list_add_tail_rcu(&doi_def->list, &cipso_v4_doi_list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | doi_add_failure_slock: | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | doi_add_failure_rlock: | 
|  | rcu_read_unlock(); | 
|  | return -EEXIST; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_remove - Remove an existing DOI from the CIPSO protocol engine | 
|  | * @doi: the DOI value | 
|  | * @callback: the DOI cleanup/free callback | 
|  | * | 
|  | * Description: | 
|  | * Removes a DOI definition from the CIPSO engine, @callback is called to | 
|  | * free any memory.  The NetLabel routines will be called to release their own | 
|  | * LSM domain mappings as well as our own domain list.  Returns zero on | 
|  | * success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_remove(u32 doi, void (*callback) (struct rcu_head * head)) | 
|  | { | 
|  | struct cipso_v4_doi *doi_def; | 
|  | struct cipso_v4_domhsh_entry *dom_iter; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (cipso_v4_doi_search(doi) != NULL) { | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | doi_def = cipso_v4_doi_search(doi); | 
|  | if (doi_def == NULL) { | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  | doi_def->valid = 0; | 
|  | list_del_rcu(&doi_def->list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | list_for_each_entry_rcu(dom_iter, &doi_def->dom_list, list) | 
|  | if (dom_iter->valid) | 
|  | netlbl_domhsh_remove(dom_iter->domain); | 
|  | cipso_v4_cache_invalidate(); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | call_rcu(&doi_def->rcu, callback); | 
|  | return 0; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_getdef - Returns a pointer to a valid DOI definition | 
|  | * @doi: the DOI value | 
|  | * | 
|  | * Description: | 
|  | * Searches for a valid DOI definition and if one is found it is returned to | 
|  | * the caller.  Otherwise NULL is returned.  The caller must ensure that | 
|  | * rcu_read_lock() is held while accessing the returned definition. | 
|  | * | 
|  | */ | 
|  | struct cipso_v4_doi *cipso_v4_doi_getdef(u32 doi) | 
|  | { | 
|  | return cipso_v4_doi_search(doi); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_walk - Iterate through the DOI definitions | 
|  | * @skip_cnt: skip past this number of DOI definitions, updated | 
|  | * @callback: callback for each DOI definition | 
|  | * @cb_arg: argument for the callback function | 
|  | * | 
|  | * Description: | 
|  | * Iterate over the DOI definition list, skipping the first @skip_cnt entries. | 
|  | * For each entry call @callback, if @callback returns a negative value stop | 
|  | * 'walking' through the list and return.  Updates the value in @skip_cnt upon | 
|  | * return.  Returns zero on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_walk(u32 *skip_cnt, | 
|  | int (*callback) (struct cipso_v4_doi *doi_def, void *arg), | 
|  | void *cb_arg) | 
|  | { | 
|  | int ret_val = -ENOENT; | 
|  | u32 doi_cnt = 0; | 
|  | struct cipso_v4_doi *iter_doi; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(iter_doi, &cipso_v4_doi_list, list) | 
|  | if (iter_doi->valid) { | 
|  | if (doi_cnt++ < *skip_cnt) | 
|  | continue; | 
|  | ret_val = callback(iter_doi, cb_arg); | 
|  | if (ret_val < 0) { | 
|  | doi_cnt--; | 
|  | goto doi_walk_return; | 
|  | } | 
|  | } | 
|  |  | 
|  | doi_walk_return: | 
|  | rcu_read_unlock(); | 
|  | *skip_cnt = doi_cnt; | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_domhsh_add - Adds a domain entry to a DOI definition | 
|  | * @doi_def: the DOI definition | 
|  | * @domain: the domain to add | 
|  | * | 
|  | * Description: | 
|  | * Adds the @domain to the the DOI specified by @doi_def, this function | 
|  | * should only be called by external functions (i.e. NetLabel).  This function | 
|  | * does allocate memory.  Returns zero on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_domhsh_add(struct cipso_v4_doi *doi_def, const char *domain) | 
|  | { | 
|  | struct cipso_v4_domhsh_entry *iter; | 
|  | struct cipso_v4_domhsh_entry *new_dom; | 
|  |  | 
|  | new_dom = kzalloc(sizeof(*new_dom), GFP_KERNEL); | 
|  | if (new_dom == NULL) | 
|  | return -ENOMEM; | 
|  | if (domain) { | 
|  | new_dom->domain = kstrdup(domain, GFP_KERNEL); | 
|  | if (new_dom->domain == NULL) { | 
|  | kfree(new_dom); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  | new_dom->valid = 1; | 
|  | INIT_RCU_HEAD(&new_dom->rcu); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | list_for_each_entry_rcu(iter, &doi_def->dom_list, list) | 
|  | if (iter->valid && | 
|  | ((domain != NULL && iter->domain != NULL && | 
|  | strcmp(iter->domain, domain) == 0) || | 
|  | (domain == NULL && iter->domain == NULL))) { | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  | kfree(new_dom->domain); | 
|  | kfree(new_dom); | 
|  | return -EEXIST; | 
|  | } | 
|  | list_add_tail_rcu(&new_dom->list, &doi_def->dom_list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_domhsh_remove - Removes a domain entry from a DOI definition | 
|  | * @doi_def: the DOI definition | 
|  | * @domain: the domain to remove | 
|  | * | 
|  | * Description: | 
|  | * Removes the @domain from the DOI specified by @doi_def, this function | 
|  | * should only be called by external functions (i.e. NetLabel).   Returns zero | 
|  | * on success and negative values on error. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_domhsh_remove(struct cipso_v4_doi *doi_def, | 
|  | const char *domain) | 
|  | { | 
|  | struct cipso_v4_domhsh_entry *iter; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | list_for_each_entry_rcu(iter, &doi_def->dom_list, list) | 
|  | if (iter->valid && | 
|  | ((domain != NULL && iter->domain != NULL && | 
|  | strcmp(iter->domain, domain) == 0) || | 
|  | (domain == NULL && iter->domain == NULL))) { | 
|  | iter->valid = 0; | 
|  | list_del_rcu(&iter->list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  | call_rcu(&iter->rcu, cipso_v4_doi_domhsh_free); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Label Mapping Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_valid - Checks to see if the given level is understood | 
|  | * @doi_def: the DOI definition | 
|  | * @level: the level to check | 
|  | * | 
|  | * Description: | 
|  | * Checks the given level against the given DOI definition and returns a | 
|  | * negative value if the level does not have a valid mapping and a zero value | 
|  | * if the level is defined by the DOI. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_valid(const struct cipso_v4_doi *doi_def, u8 level) | 
|  | { | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | if (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL) | 
|  | return 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_hton - Perform a level mapping from the host to the network | 
|  | * @doi_def: the DOI definition | 
|  | * @host_lvl: the host MLS level | 
|  | * @net_lvl: the network/CIPSO MLS level | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS level to the correct | 
|  | * CIPSO level using the given DOI definition.  Returns zero on success, | 
|  | * negative values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_hton(const struct cipso_v4_doi *doi_def, | 
|  | u32 host_lvl, | 
|  | u32 *net_lvl) | 
|  | { | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | *net_lvl = host_lvl; | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | if (host_lvl < doi_def->map.std->lvl.local_size) { | 
|  | *net_lvl = doi_def->map.std->lvl.local[host_lvl]; | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_ntoh - Perform a level mapping from the network to the host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_lvl: the network/CIPSO MLS level | 
|  | * @host_lvl: the host MLS level | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO level to the correct local MLS | 
|  | * level using the given DOI definition.  Returns zero on success, negative | 
|  | * values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | u32 net_lvl, | 
|  | u32 *host_lvl) | 
|  | { | 
|  | struct cipso_v4_std_map_tbl *map_tbl; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | *host_lvl = net_lvl; | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | map_tbl = doi_def->map.std; | 
|  | if (net_lvl < map_tbl->lvl.cipso_size && | 
|  | map_tbl->lvl.cipso[net_lvl] < CIPSO_V4_INV_LVL) { | 
|  | *host_lvl = doi_def->map.std->lvl.cipso[net_lvl]; | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_valid - Checks to see if the category bitmap is valid | 
|  | * @doi_def: the DOI definition | 
|  | * @bitmap: category bitmap | 
|  | * @bitmap_len: bitmap length in bytes | 
|  | * | 
|  | * Description: | 
|  | * Checks the given category bitmap against the given DOI definition and | 
|  | * returns a negative value if any of the categories in the bitmap do not have | 
|  | * a valid mapping and a zero value if all of the categories are valid. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_valid(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *bitmap, | 
|  | u32 bitmap_len) | 
|  | { | 
|  | int cat = -1; | 
|  | u32 bitmap_len_bits = bitmap_len * 8; | 
|  | u32 cipso_cat_size = doi_def->map.std->cat.cipso_size; | 
|  | u32 *cipso_array = doi_def->map.std->cat.cipso; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | for (;;) { | 
|  | cat = cipso_v4_bitmap_walk(bitmap, | 
|  | bitmap_len_bits, | 
|  | cat + 1, | 
|  | 1); | 
|  | if (cat < 0) | 
|  | break; | 
|  | if (cat >= cipso_cat_size || | 
|  | cipso_array[cat] >= CIPSO_V4_INV_CAT) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | if (cat == -1) | 
|  | return 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_hton - Perform a category mapping from host to network | 
|  | * @doi_def: the DOI definition | 
|  | * @host_cat: the category bitmap in host format | 
|  | * @host_cat_len: the length of the host's category bitmap in bytes | 
|  | * @net_cat: the zero'd out category bitmap in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS category bitmap to the | 
|  | * correct CIPSO bitmap using the given DOI definition.  Returns the minimum | 
|  | * size in bytes of the network bitmap on success, negative values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_hton(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *host_cat, | 
|  | u32 host_cat_len, | 
|  | unsigned char *net_cat, | 
|  | u32 net_cat_len) | 
|  | { | 
|  | int host_spot = -1; | 
|  | u32 net_spot; | 
|  | u32 net_spot_max = 0; | 
|  | u32 host_clen_bits = host_cat_len * 8; | 
|  | u32 net_clen_bits = net_cat_len * 8; | 
|  | u32 host_cat_size = doi_def->map.std->cat.local_size; | 
|  | u32 *host_cat_array = doi_def->map.std->cat.local; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | net_spot_max = host_cat_len - 1; | 
|  | while (net_spot_max > 0 && host_cat[net_spot_max] == 0) | 
|  | net_spot_max--; | 
|  | if (net_spot_max > net_cat_len) | 
|  | return -EINVAL; | 
|  | memcpy(net_cat, host_cat, net_spot_max); | 
|  | return net_spot_max; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | for (;;) { | 
|  | host_spot = cipso_v4_bitmap_walk(host_cat, | 
|  | host_clen_bits, | 
|  | host_spot + 1, | 
|  | 1); | 
|  | if (host_spot < 0) | 
|  | break; | 
|  | if (host_spot >= host_cat_size) | 
|  | return -EPERM; | 
|  |  | 
|  | net_spot = host_cat_array[host_spot]; | 
|  | if (net_spot >= net_clen_bits) | 
|  | return -ENOSPC; | 
|  | cipso_v4_bitmap_setbit(net_cat, net_spot, 1); | 
|  |  | 
|  | if (net_spot > net_spot_max) | 
|  | net_spot_max = net_spot; | 
|  | } | 
|  |  | 
|  | if (host_spot == -2) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (++net_spot_max % 8) | 
|  | return net_spot_max / 8 + 1; | 
|  | return net_spot_max / 8; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_ntoh - Perform a category mapping from network to host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_cat: the category bitmap in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * @host_cat: the zero'd out category bitmap in host format | 
|  | * @host_cat_len: the length of the host's category bitmap in bytes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO bitmap to the correct local | 
|  | * MLS category bitmap using the given DOI definition.  Returns the minimum | 
|  | * size in bytes of the host bitmap on success, negative values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *net_cat, | 
|  | u32 net_cat_len, | 
|  | unsigned char *host_cat, | 
|  | u32 host_cat_len) | 
|  | { | 
|  | u32 host_spot; | 
|  | u32 host_spot_max = 0; | 
|  | int net_spot = -1; | 
|  | u32 net_clen_bits = net_cat_len * 8; | 
|  | u32 host_clen_bits = host_cat_len * 8; | 
|  | u32 net_cat_size = doi_def->map.std->cat.cipso_size; | 
|  | u32 *net_cat_array = doi_def->map.std->cat.cipso; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | if (net_cat_len > host_cat_len) | 
|  | return -EINVAL; | 
|  | memcpy(host_cat, net_cat, net_cat_len); | 
|  | return net_cat_len; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | for (;;) { | 
|  | net_spot = cipso_v4_bitmap_walk(net_cat, | 
|  | net_clen_bits, | 
|  | net_spot + 1, | 
|  | 1); | 
|  | if (net_spot < 0) | 
|  | break; | 
|  | if (net_spot >= net_cat_size || | 
|  | net_cat_array[net_spot] >= CIPSO_V4_INV_CAT) | 
|  | return -EPERM; | 
|  |  | 
|  | host_spot = net_cat_array[net_spot]; | 
|  | if (host_spot >= host_clen_bits) | 
|  | return -ENOSPC; | 
|  | cipso_v4_bitmap_setbit(host_cat, host_spot, 1); | 
|  |  | 
|  | if (host_spot > host_spot_max) | 
|  | host_spot_max = host_spot; | 
|  | } | 
|  |  | 
|  | if (net_spot == -2) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (++host_spot_max % 8) | 
|  | return host_spot_max / 8 + 1; | 
|  | return host_spot_max / 8; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Protocol Handling Functions | 
|  | */ | 
|  |  | 
|  | #define CIPSO_V4_HDR_LEN              6 | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_hdr - Generate a CIPSO option header | 
|  | * @doi_def: the DOI definition | 
|  | * @len: the total tag length in bytes | 
|  | * @buf: the CIPSO option buffer | 
|  | * | 
|  | * Description: | 
|  | * Write a CIPSO header into the beginning of @buffer.  Return zero on success, | 
|  | * negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_hdr(const struct cipso_v4_doi *doi_def, | 
|  | u32 len, | 
|  | unsigned char *buf) | 
|  | { | 
|  | if (CIPSO_V4_HDR_LEN + len > 40) | 
|  | return -ENOSPC; | 
|  |  | 
|  | buf[0] = IPOPT_CIPSO; | 
|  | buf[1] = CIPSO_V4_HDR_LEN + len; | 
|  | *(u32 *)&buf[2] = htonl(doi_def->doi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define CIPSO_V4_TAG1_CAT_LEN         30 | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_rbm - Generate a CIPSO restricted bitmap tag (type #1) | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @buffer: the option buffer | 
|  | * @buffer_len: length of buffer in bytes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the restricted bitmap tag, tag type #1.  The | 
|  | * actual buffer length may be larger than the indicated size due to | 
|  | * translation between host and network category bitmaps.  Returns zero on | 
|  | * success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char **buffer, | 
|  | u32 *buffer_len) | 
|  | { | 
|  | int ret_val = -EPERM; | 
|  | unsigned char *buf = NULL; | 
|  | u32 buf_len; | 
|  | u32 level; | 
|  |  | 
|  | if (secattr->mls_cat) { | 
|  | buf = kzalloc(CIPSO_V4_HDR_LEN + 4 + CIPSO_V4_TAG1_CAT_LEN, | 
|  | GFP_ATOMIC); | 
|  | if (buf == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret_val = cipso_v4_map_cat_rbm_hton(doi_def, | 
|  | secattr->mls_cat, | 
|  | secattr->mls_cat_len, | 
|  | &buf[CIPSO_V4_HDR_LEN + 4], | 
|  | CIPSO_V4_TAG1_CAT_LEN); | 
|  | if (ret_val < 0) | 
|  | goto gentag_failure; | 
|  |  | 
|  | /* This will send packets using the "optimized" format when | 
|  | * possibile as specified in  section 3.4.2.6 of the | 
|  | * CIPSO draft. */ | 
|  | if (cipso_v4_rbm_optfmt && (ret_val > 0 && ret_val < 10)) | 
|  | ret_val = 10; | 
|  |  | 
|  | buf_len = 4 + ret_val; | 
|  | } else { | 
|  | buf = kzalloc(CIPSO_V4_HDR_LEN + 4, GFP_ATOMIC); | 
|  | if (buf == NULL) | 
|  | return -ENOMEM; | 
|  | buf_len = 4; | 
|  | } | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_hton(doi_def, secattr->mls_lvl, &level); | 
|  | if (ret_val != 0) | 
|  | goto gentag_failure; | 
|  |  | 
|  | ret_val = cipso_v4_gentag_hdr(doi_def, buf_len, buf); | 
|  | if (ret_val != 0) | 
|  | goto gentag_failure; | 
|  |  | 
|  | buf[CIPSO_V4_HDR_LEN] = 0x01; | 
|  | buf[CIPSO_V4_HDR_LEN + 1] = buf_len; | 
|  | buf[CIPSO_V4_HDR_LEN + 3] = level; | 
|  |  | 
|  | *buffer = buf; | 
|  | *buffer_len = CIPSO_V4_HDR_LEN + buf_len; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | gentag_failure: | 
|  | kfree(buf); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_parsetag_rbm - Parse a CIPSO restricted bitmap tag | 
|  | * @doi_def: the DOI definition | 
|  | * @tag: the CIPSO tag | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse a CIPSO restricted bitmap tag (tag type #1) and return the security | 
|  | * attributes in @secattr.  Return zero on success, negatives values on | 
|  | * failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_parsetag_rbm(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *tag, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u8 tag_len = tag[1]; | 
|  | u32 level; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_ntoh(doi_def, tag[3], &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | secattr->mls_lvl = level; | 
|  | secattr->mls_lvl_vld = 1; | 
|  |  | 
|  | if (tag_len > 4) { | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | secattr->mls_cat_len = tag_len - 4; | 
|  | break; | 
|  | case CIPSO_V4_MAP_STD: | 
|  | secattr->mls_cat_len = | 
|  | doi_def->map.std->cat.local_size; | 
|  | break; | 
|  | } | 
|  | secattr->mls_cat = kzalloc(secattr->mls_cat_len, GFP_ATOMIC); | 
|  | if (secattr->mls_cat == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret_val = cipso_v4_map_cat_rbm_ntoh(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4, | 
|  | secattr->mls_cat, | 
|  | secattr->mls_cat_len); | 
|  | if (ret_val < 0) { | 
|  | kfree(secattr->mls_cat); | 
|  | return ret_val; | 
|  | } | 
|  | secattr->mls_cat_len = ret_val; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_validate - Validate a CIPSO option | 
|  | * @option: the start of the option, on error it is set to point to the error | 
|  | * | 
|  | * Description: | 
|  | * This routine is called to validate a CIPSO option, it checks all of the | 
|  | * fields to ensure that they are at least valid, see the draft snippet below | 
|  | * for details.  If the option is valid then a zero value is returned and | 
|  | * the value of @option is unchanged.  If the option is invalid then a | 
|  | * non-zero value is returned and @option is adjusted to point to the | 
|  | * offending portion of the option.  From the IETF draft ... | 
|  | * | 
|  | *  "If any field within the CIPSO options, such as the DOI identifier, is not | 
|  | *   recognized the IP datagram is discarded and an ICMP 'parameter problem' | 
|  | *   (type 12) is generated and returned.  The ICMP code field is set to 'bad | 
|  | *   parameter' (code 0) and the pointer is set to the start of the CIPSO field | 
|  | *   that is unrecognized." | 
|  | * | 
|  | */ | 
|  | int cipso_v4_validate(unsigned char **option) | 
|  | { | 
|  | unsigned char *opt = *option; | 
|  | unsigned char *tag; | 
|  | unsigned char opt_iter; | 
|  | unsigned char err_offset = 0; | 
|  | u8 opt_len; | 
|  | u8 tag_len; | 
|  | struct cipso_v4_doi *doi_def = NULL; | 
|  | u32 tag_iter; | 
|  |  | 
|  | /* caller already checks for length values that are too large */ | 
|  | opt_len = opt[1]; | 
|  | if (opt_len < 8) { | 
|  | err_offset = 1; | 
|  | goto validate_return; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_getdef(ntohl(*((u32 *)&opt[2]))); | 
|  | if (doi_def == NULL) { | 
|  | err_offset = 2; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | opt_iter = 6; | 
|  | tag = opt + opt_iter; | 
|  | while (opt_iter < opt_len) { | 
|  | for (tag_iter = 0; doi_def->tags[tag_iter] != tag[0];) | 
|  | if (doi_def->tags[tag_iter] == CIPSO_V4_TAG_INVALID || | 
|  | ++tag_iter == CIPSO_V4_TAG_MAXCNT) { | 
|  | err_offset = opt_iter; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | tag_len = tag[1]; | 
|  | if (tag_len > (opt_len - opt_iter)) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | switch (tag[0]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | if (tag_len < 4) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | /* We are already going to do all the verification | 
|  | * necessary at the socket layer so from our point of | 
|  | * view it is safe to turn these checks off (and less | 
|  | * work), however, the CIPSO draft says we should do | 
|  | * all the CIPSO validations here but it doesn't | 
|  | * really specify _exactly_ what we need to validate | 
|  | * ... so, just make it a sysctl tunable. */ | 
|  | if (cipso_v4_rbm_strictvalid) { | 
|  | if (cipso_v4_map_lvl_valid(doi_def, | 
|  | tag[3]) < 0) { | 
|  | err_offset = opt_iter + 3; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | if (tag_len > 4 && | 
|  | cipso_v4_map_cat_rbm_valid(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4) < 0) { | 
|  | err_offset = opt_iter + 4; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | } | 
|  | break; | 
|  | default: | 
|  | err_offset = opt_iter; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | tag += tag_len; | 
|  | opt_iter += tag_len; | 
|  | } | 
|  |  | 
|  | validate_return_locked: | 
|  | rcu_read_unlock(); | 
|  | validate_return: | 
|  | *option = opt + err_offset; | 
|  | return err_offset; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_error - Send the correct reponse for a bad packet | 
|  | * @skb: the packet | 
|  | * @error: the error code | 
|  | * @gateway: CIPSO gateway flag | 
|  | * | 
|  | * Description: | 
|  | * Based on the error code given in @error, send an ICMP error message back to | 
|  | * the originating host.  From the IETF draft ... | 
|  | * | 
|  | *  "If the contents of the CIPSO [option] are valid but the security label is | 
|  | *   outside of the configured host or port label range, the datagram is | 
|  | *   discarded and an ICMP 'destination unreachable' (type 3) is generated and | 
|  | *   returned.  The code field of the ICMP is set to 'communication with | 
|  | *   destination network administratively prohibited' (code 9) or to | 
|  | *   'communication with destination host administratively prohibited' | 
|  | *   (code 10).  The value of the code is dependent on whether the originator | 
|  | *   of the ICMP message is acting as a CIPSO host or a CIPSO gateway.  The | 
|  | *   recipient of the ICMP message MUST be able to handle either value.  The | 
|  | *   same procedure is performed if a CIPSO [option] can not be added to an | 
|  | *   IP packet because it is too large to fit in the IP options area." | 
|  | * | 
|  | *  "If the error is triggered by receipt of an ICMP message, the message is | 
|  | *   discarded and no response is permitted (consistent with general ICMP | 
|  | *   processing rules)." | 
|  | * | 
|  | */ | 
|  | void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway) | 
|  | { | 
|  | if (skb->nh.iph->protocol == IPPROTO_ICMP || error != -EACCES) | 
|  | return; | 
|  |  | 
|  | if (gateway) | 
|  | icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0); | 
|  | else | 
|  | icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_socket_setattr - Add a CIPSO option to a socket | 
|  | * @sock: the socket | 
|  | * @doi_def: the CIPSO DOI to use | 
|  | * @secattr: the specific security attributes of the socket | 
|  | * | 
|  | * Description: | 
|  | * Set the CIPSO option on the given socket using the DOI definition and | 
|  | * security attributes passed to the function.  This function requires | 
|  | * exclusive access to @sock->sk, which means it either needs to be in the | 
|  | * process of being created or locked via lock_sock(sock->sk).  Returns zero on | 
|  | * success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_socket_setattr(const struct socket *sock, | 
|  | const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -EPERM; | 
|  | u32 iter; | 
|  | unsigned char *buf = NULL; | 
|  | u32 buf_len = 0; | 
|  | u32 opt_len; | 
|  | struct ip_options *opt = NULL; | 
|  | struct sock *sk; | 
|  | struct inet_sock *sk_inet; | 
|  | struct inet_connection_sock *sk_conn; | 
|  |  | 
|  | /* In the case of sock_create_lite(), the sock->sk field is not | 
|  | * defined yet but it is not a problem as the only users of these | 
|  | * "lite" PF_INET sockets are functions which do an accept() call | 
|  | * afterwards so we will label the socket as part of the accept(). */ | 
|  | sk = sock->sk; | 
|  | if (sk == NULL) | 
|  | return 0; | 
|  |  | 
|  | /* XXX - This code assumes only one tag per CIPSO option which isn't | 
|  | * really a good assumption to make but since we only support the MAC | 
|  | * tags right now it is a safe assumption. */ | 
|  | iter = 0; | 
|  | do { | 
|  | switch (doi_def->tags[iter]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | ret_val = cipso_v4_gentag_rbm(doi_def, | 
|  | secattr, | 
|  | &buf, | 
|  | &buf_len); | 
|  | break; | 
|  | default: | 
|  | ret_val = -EPERM; | 
|  | goto socket_setattr_failure; | 
|  | } | 
|  |  | 
|  | iter++; | 
|  | } while (ret_val != 0 && | 
|  | iter < CIPSO_V4_TAG_MAXCNT && | 
|  | doi_def->tags[iter] != CIPSO_V4_TAG_INVALID); | 
|  | if (ret_val != 0) | 
|  | goto socket_setattr_failure; | 
|  |  | 
|  | /* We can't use ip_options_get() directly because it makes a call to | 
|  | * ip_options_get_alloc() which allocates memory with GFP_KERNEL and | 
|  | * we can't block here. */ | 
|  | opt_len = (buf_len + 3) & ~3; | 
|  | opt = kzalloc(sizeof(*opt) + opt_len, GFP_ATOMIC); | 
|  | if (opt == NULL) { | 
|  | ret_val = -ENOMEM; | 
|  | goto socket_setattr_failure; | 
|  | } | 
|  | memcpy(opt->__data, buf, buf_len); | 
|  | opt->optlen = opt_len; | 
|  | opt->is_data = 1; | 
|  | kfree(buf); | 
|  | buf = NULL; | 
|  | ret_val = ip_options_compile(opt, NULL); | 
|  | if (ret_val != 0) | 
|  | goto socket_setattr_failure; | 
|  |  | 
|  | sk_inet = inet_sk(sk); | 
|  | if (sk_inet->is_icsk) { | 
|  | sk_conn = inet_csk(sk); | 
|  | if (sk_inet->opt) | 
|  | sk_conn->icsk_ext_hdr_len -= sk_inet->opt->optlen; | 
|  | sk_conn->icsk_ext_hdr_len += opt->optlen; | 
|  | sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie); | 
|  | } | 
|  | opt = xchg(&sk_inet->opt, opt); | 
|  | kfree(opt); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | socket_setattr_failure: | 
|  | kfree(buf); | 
|  | kfree(opt); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_sock_getattr - Get the security attributes from a sock | 
|  | * @sk: the sock | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Query @sk to see if there is a CIPSO option attached to the sock and if | 
|  | * there is return the CIPSO security attributes in @secattr.  This function | 
|  | * requires that @sk be locked, or privately held, but it does not do any | 
|  | * locking itself.  Returns zero on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -ENOMSG; | 
|  | struct inet_sock *sk_inet; | 
|  | unsigned char *cipso_ptr; | 
|  | u32 doi; | 
|  | struct cipso_v4_doi *doi_def; | 
|  |  | 
|  | sk_inet = inet_sk(sk); | 
|  | if (sk_inet->opt == NULL || sk_inet->opt->cipso == 0) | 
|  | return -ENOMSG; | 
|  | cipso_ptr = sk_inet->opt->__data + sk_inet->opt->cipso - | 
|  | sizeof(struct iphdr); | 
|  | ret_val = cipso_v4_cache_check(cipso_ptr, cipso_ptr[1], secattr); | 
|  | if (ret_val == 0) | 
|  | return ret_val; | 
|  |  | 
|  | doi = ntohl(*(u32 *)&cipso_ptr[2]); | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_getdef(doi); | 
|  | if (doi_def == NULL) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOMSG; | 
|  | } | 
|  | switch (cipso_ptr[6]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | ret_val = cipso_v4_parsetag_rbm(doi_def, | 
|  | &cipso_ptr[6], | 
|  | secattr); | 
|  | break; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_socket_getattr - Get the security attributes from a socket | 
|  | * @sock: the socket | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Query @sock to see if there is a CIPSO option attached to the socket and if | 
|  | * there is return the CIPSO security attributes in @secattr.  Returns zero on | 
|  | * success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_socket_getattr(const struct socket *sock, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  |  | 
|  | lock_sock(sock->sk); | 
|  | ret_val = cipso_v4_sock_getattr(sock->sk, secattr); | 
|  | release_sock(sock->sk); | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_skbuff_getattr - Get the security attributes from the CIPSO option | 
|  | * @skb: the packet | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse the given packet's CIPSO option and return the security attributes. | 
|  | * Returns zero on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_skbuff_getattr(const struct sk_buff *skb, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -ENOMSG; | 
|  | unsigned char *cipso_ptr; | 
|  | u32 doi; | 
|  | struct cipso_v4_doi *doi_def; | 
|  |  | 
|  | if (!CIPSO_V4_OPTEXIST(skb)) | 
|  | return -ENOMSG; | 
|  | cipso_ptr = CIPSO_V4_OPTPTR(skb); | 
|  | if (cipso_v4_cache_check(cipso_ptr, cipso_ptr[1], secattr) == 0) | 
|  | return 0; | 
|  |  | 
|  | doi = ntohl(*(u32 *)&cipso_ptr[2]); | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_getdef(doi); | 
|  | if (doi_def == NULL) | 
|  | goto skbuff_getattr_return; | 
|  | switch (cipso_ptr[6]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | ret_val = cipso_v4_parsetag_rbm(doi_def, | 
|  | &cipso_ptr[6], | 
|  | secattr); | 
|  | break; | 
|  | } | 
|  |  | 
|  | skbuff_getattr_return: | 
|  | rcu_read_unlock(); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_init - Initialize the CIPSO module | 
|  | * | 
|  | * Description: | 
|  | * Initialize the CIPSO module and prepare it for use.  Returns zero on success | 
|  | * and negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int __init cipso_v4_init(void) | 
|  | { | 
|  | int ret_val; | 
|  |  | 
|  | ret_val = cipso_v4_cache_init(); | 
|  | if (ret_val != 0) | 
|  | panic("Failed to initialize the CIPSO/IPv4 cache (%d)\n", | 
|  | ret_val); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(cipso_v4_init); |