)]}'
{
  "commit": "f3fed682f78dfab384d3dc3f9ca7a7338a93c142",
  "tree": "86fb6bd8b175fc321d8db33aeef643e230fa98b9",
  "parents": [
    "c02a02ee4db5cd8b95ee3cc705b535f443612583"
  ],
  "author": {
    "name": "Timur Tabi",
    "email": "timur@freescale.com",
    "time": "Wed Jun 08 14:03:05 2011 -0500"
  },
  "committer": {
    "name": "Kumar Gala",
    "email": "galak@kernel.crashing.org",
    "time": "Wed Jun 22 06:14:54 2011 -0500"
  },
  "message": "powerpc/p1022ds: fix audio-related properties in the device tree\n\nOn the Freescale P1022DS reference board, the SSI audio controller is\nconnected in \"asynchronous\" mode to the codec\u0027s clocks, so the device tree\nneeds an \"fsl,ssi-asynchronous\" property.\n\nAlso remove the clock-frequency property from the wm8776 node, because\nthe clock is enabled only if U-Boot enables it, and U-Boot will set the\nproperty if the clock is enabled.  A future version of the P1022DS audio\ndriver will configure the clock itself, but for now, the driver should\nnot be told that the clock is running when it isn\u0027t.\n\nAlso fix the FIFO depth to 15, instead of 16.\n\nSigned-off-by: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "4f685a779f4cd591ee3f941f1bea0b6dc3b6e717",
      "old_mode": 33188,
      "old_path": "arch/powerpc/boot/dts/p1022ds.dts",
      "new_id": "98d9426d4b85429d511192aba3b7a4bb5b2dd3dd",
      "new_mode": 33188,
      "new_path": "arch/powerpc/boot/dts/p1022ds.dts"
    }
  ]
}