|  | /* | 
|  | * Manroland mucmc52 board Device Tree Source | 
|  | * | 
|  | * Copyright (C) 2009 DENX Software Engineering GmbH | 
|  | * Heiko Schocher <hs@denx.de> | 
|  | * Copyright 2006-2007 Secret Lab Technologies Ltd. | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  |  | 
|  | /include/ "mpc5200b.dtsi" | 
|  |  | 
|  | / { | 
|  | model = "manroland,mucmc52"; | 
|  | compatible = "manroland,mucmc52"; | 
|  |  | 
|  | soc5200@f0000000 { | 
|  | gpt0: timer@600 {	// GPT 0 in GPIO mode | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  |  | 
|  | gpt1: timer@610 {	// General Purpose Timer in GPIO mode | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  |  | 
|  | gpt2: timer@620 {	// General Purpose Timer in GPIO mode | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  |  | 
|  | gpt3: timer@630 {	// General Purpose Timer in GPIO mode | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  |  | 
|  | timer@640 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | timer@650 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | timer@660 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | timer@670 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | rtc@800 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | can@900 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | can@980 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | spi@f00 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | usb@1000 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2000 {		// PSC1 | 
|  | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
|  | }; | 
|  |  | 
|  | psc@2200 {		// PSC2 | 
|  | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
|  | }; | 
|  |  | 
|  | psc@2400 {		// PSC3 | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2600 {		// PSC4 | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2800 {		// PSC5 | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2c00 {		// PSC6 | 
|  | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
|  | }; | 
|  |  | 
|  | ethernet@3000 { | 
|  | phy-handle = <&phy0>; | 
|  | }; | 
|  |  | 
|  | mdio@3000 { | 
|  | phy0: ethernet-phy@0 { | 
|  | compatible = "intel,lxt971"; | 
|  | reg = <0>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | i2c@3d00 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | i2c@3d40 { | 
|  | hwmon@2c { | 
|  | compatible = "ad,adm9240"; | 
|  | reg = <0x2c>; | 
|  | }; | 
|  | rtc@51 { | 
|  | compatible = "nxp,pcf8563"; | 
|  | reg = <0x51>; | 
|  | }; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | pci@f0000d00 { | 
|  | interrupt-map-mask = <0xf800 0 0 7>; | 
|  | interrupt-map = < | 
|  | /* IDSEL 0x10 */ | 
|  | 0x8000 0 0 1 &mpc5200_pic 0 3 3 | 
|  | 0x8000 0 0 2 &mpc5200_pic 0 3 3 | 
|  | 0x8000 0 0 3 &mpc5200_pic 0 2 3 | 
|  | 0x8000 0 0 4 &mpc5200_pic 0 1 3 | 
|  | >; | 
|  | ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 | 
|  | 0x02000000 0 0x90000000 0x90000000 0 0x10000000 | 
|  | 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; | 
|  | }; | 
|  |  | 
|  | localbus { | 
|  | ranges = <0 0 0xff800000 0x00800000 | 
|  | 1 0 0x80000000 0x00800000 | 
|  | 3 0 0x80000000 0x00800000>; | 
|  |  | 
|  | flash@0,0 { | 
|  | compatible = "cfi-flash"; | 
|  | reg = <0 0 0x00800000>; | 
|  | bank-width = <4>; | 
|  | device-width = <2>; | 
|  | #size-cells = <1>; | 
|  | #address-cells = <1>; | 
|  | partition@0 { | 
|  | label = "DTS"; | 
|  | reg = <0x0 0x00100000>; | 
|  | }; | 
|  | partition@100000 { | 
|  | label = "Kernel"; | 
|  | reg = <0x100000 0x00200000>; | 
|  | }; | 
|  | partition@300000 { | 
|  | label = "RootFS"; | 
|  | reg = <0x00300000 0x00200000>; | 
|  | }; | 
|  | partition@500000 { | 
|  | label = "user"; | 
|  | reg = <0x00500000 0x00200000>; | 
|  | }; | 
|  | partition@700000 { | 
|  | label = "U-Boot"; | 
|  | reg = <0x00700000 0x00040000>; | 
|  | }; | 
|  | partition@740000 { | 
|  | label = "Env"; | 
|  | reg = <0x00740000 0x00020000>; | 
|  | }; | 
|  | partition@760000 { | 
|  | label = "red. Env"; | 
|  | reg = <0x00760000 0x00020000>; | 
|  | }; | 
|  | partition@780000 { | 
|  | label = "reserve"; | 
|  | reg = <0x00780000 0x00080000>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | simple100: gpio-controller-100@3,600100 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600100 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple104: gpio-controller-104@3,600104 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600104 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple200: gpio-controller-200@3,600200 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600200 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple201: gpio-controller-201@3,600201 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600201 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple202: gpio-controller-202@3,600202 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600202 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple203: gpio-controller-203@3,600203 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600203 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple204: gpio-controller-204@3,600204 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600204 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple206: gpio-controller-206@3,600206 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600206 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple207: gpio-controller-207@3,600207 { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x00600207 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  | simple20f: gpio-controller-20f@3,60020f { | 
|  | compatible = "manroland,mucmc52-aux-gpio"; | 
|  | reg = <3 0x0060020f 0x1>; | 
|  | gpio-controller; | 
|  | #gpio-cells = <2>; | 
|  | }; | 
|  |  | 
|  | }; | 
|  | }; |