[SCSI] megaraid_sas: add the IEEE SGE support to SAS2 controller
To increase the performance, megaraid sas driver added the IEEE SGE
support to support SAS2 controller.
Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 5afd651..4c04a68 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -696,6 +696,35 @@
return sge_count;
}
+/**
+ * megasas_make_sgl_skinny - Prepares IEEE SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl_skinny(struct megasas_instance *instance,
+ struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge_skinny[i].phys_addr =
+ sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
/**
* megasas_get_frame_count - Computes the number of frames
* @frame_type : type of frame- io or pthru frame
@@ -704,7 +733,8 @@
* Returns the number of frames required for numnber of sge's (sge_count)
*/
-static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
+static u32 megasas_get_frame_count(struct megasas_instance *instance,
+ u8 sge_count, u8 frame_type)
{
int num_cnt;
int sge_bytes;
@@ -714,6 +744,10 @@
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Main frame can contain 2 SGEs for 64-bit SGLs and
* 3 SGEs for 32-bit SGLs for ldio &
@@ -721,12 +755,16 @@
* 2 SGEs for 32-bit SGLs for pthru frame
*/
if (unlikely(frame_type == PTHRU_FRAME)) {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 1;
else
num_cnt = sge_count - 2;
} else {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 2;
else
num_cnt = sge_count - 3;
@@ -775,6 +813,10 @@
else if (scp->sc_data_direction == PCI_DMA_NONE)
flags = MFI_FRAME_DIR_NONE;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the DCDB frame
*/
@@ -804,7 +846,11 @@
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee == 1) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &pthru->sgl);
+ } else if (IS_DMA64) {
pthru->flags |= MFI_FRAME_SGL64;
pthru->sge_count = megasas_make_sgl64(instance, scp,
&pthru->sgl);
@@ -823,7 +869,7 @@
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(pthru->sge_count,
+ cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
PTHRU_FRAME);
return cmd->frame_count;
@@ -854,6 +900,10 @@
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
@@ -924,7 +974,11 @@
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &ldio->sgl);
+ } else if (IS_DMA64) {
ldio->flags |= MFI_FRAME_SGL64;
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
} else
@@ -941,7 +995,8 @@
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(ldio->sge_count, IO_FRAME);
+ cmd->frame_count = megasas_get_frame_count(instance,
+ ldio->sge_count, IO_FRAME);
return cmd->frame_count;
}
@@ -1929,6 +1984,10 @@
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Calculated the number of 64byte frames required for SGL
*/
@@ -2725,6 +2784,11 @@
dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+ if (instance->aen_cmd != NULL) {
+ megasas_return_cmd(instance, cmd);
+ return 0;
+ }
+
/*
* Store reference to the cmd used to register for AEN. When an
* application wants us to register for AEN, we have to abort this
@@ -2895,6 +2959,7 @@
*instance->producer = 0;
*instance->consumer = 0;
megasas_poll_wait_aen = 0;
+ instance->flag_ieee = 0;
instance->evt_detail = pci_alloc_consistent(pdev,
sizeof(struct
@@ -2933,6 +2998,7 @@
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->flag_ieee = 1;
sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
} else
sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);