|  | /****************************************************************************** | 
|  |  | 
|  | Copyright(c) 2004-2005 Intel Corporation. All rights reserved. | 
|  |  | 
|  | Portions of this file are based on the WEP enablement code provided by the | 
|  | Host AP project hostap-drivers v0.1.3 | 
|  | Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen | 
|  | <j@w1.fi> | 
|  | Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify it | 
|  | under the terms of version 2 of the GNU General Public License as | 
|  | published by the Free Software Foundation. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License along with | 
|  | this program; if not, write to the Free Software Foundation, Inc., 59 | 
|  | Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
|  |  | 
|  | The full GNU General Public License is included in this distribution in the | 
|  | file called LICENSE. | 
|  |  | 
|  | Contact Information: | 
|  | James P. Ketrenos <ipw2100-admin@linux.intel.com> | 
|  | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  |  | 
|  | ******************************************************************************/ | 
|  |  | 
|  | #include <linux/kmod.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/jiffies.h> | 
|  |  | 
|  | #include <net/ieee80211.h> | 
|  | #include <linux/wireless.h> | 
|  |  | 
|  | static const char *ieee80211_modes[] = { | 
|  | "?", "a", "b", "ab", "g", "ag", "bg", "abg" | 
|  | }; | 
|  |  | 
|  | #define MAX_CUSTOM_LEN 64 | 
|  | static char *ieee80211_translate_scan(struct ieee80211_device *ieee, | 
|  | char *start, char *stop, | 
|  | struct ieee80211_network *network) | 
|  | { | 
|  | char custom[MAX_CUSTOM_LEN]; | 
|  | char *p; | 
|  | struct iw_event iwe; | 
|  | int i, j; | 
|  | char *current_val;	/* For rates */ | 
|  | u8 rate; | 
|  |  | 
|  | /* First entry *MUST* be the AP MAC address */ | 
|  | iwe.cmd = SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN); | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); | 
|  |  | 
|  | /* Remaining entries will be displayed in the order we provide them */ | 
|  |  | 
|  | /* Add the ESSID */ | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.flags = 1; | 
|  | if (network->flags & NETWORK_EMPTY_ESSID) { | 
|  | iwe.u.data.length = sizeof("<hidden>"); | 
|  | start = iwe_stream_add_point(start, stop, &iwe, "<hidden>"); | 
|  | } else { | 
|  | iwe.u.data.length = min(network->ssid_len, (u8) 32); | 
|  | start = iwe_stream_add_point(start, stop, &iwe, network->ssid); | 
|  | } | 
|  |  | 
|  | /* Add the protocol name */ | 
|  | iwe.cmd = SIOCGIWNAME; | 
|  | snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", | 
|  | ieee80211_modes[network->mode]); | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN); | 
|  |  | 
|  | /* Add mode */ | 
|  | iwe.cmd = SIOCGIWMODE; | 
|  | if (network->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { | 
|  | if (network->capability & WLAN_CAPABILITY_ESS) | 
|  | iwe.u.mode = IW_MODE_MASTER; | 
|  | else | 
|  | iwe.u.mode = IW_MODE_ADHOC; | 
|  |  | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); | 
|  | } | 
|  |  | 
|  | /* Add channel and frequency */ | 
|  | /* Note : userspace automatically computes channel using iwrange */ | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel); | 
|  | iwe.u.freq.e = 6; | 
|  | iwe.u.freq.i = 0; | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); | 
|  |  | 
|  | /* Add encryption capability */ | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if (network->capability & WLAN_CAPABILITY_PRIVACY) | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | else | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | iwe.u.data.length = 0; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, network->ssid); | 
|  |  | 
|  | /* Add basic and extended rates */ | 
|  | /* Rate : stuffing multiple values in a single event require a bit | 
|  | * more of magic - Jean II */ | 
|  | current_val = start + IW_EV_LCP_LEN; | 
|  | iwe.cmd = SIOCGIWRATE; | 
|  | /* Those two flags are ignored... */ | 
|  | iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
|  |  | 
|  | for (i = 0, j = 0; i < network->rates_len;) { | 
|  | if (j < network->rates_ex_len && | 
|  | ((network->rates_ex[j] & 0x7F) < | 
|  | (network->rates[i] & 0x7F))) | 
|  | rate = network->rates_ex[j++] & 0x7F; | 
|  | else | 
|  | rate = network->rates[i++] & 0x7F; | 
|  | /* Bit rate given in 500 kb/s units (+ 0x80) */ | 
|  | iwe.u.bitrate.value = ((rate & 0x7f) * 500000); | 
|  | /* Add new value to event */ | 
|  | current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); | 
|  | } | 
|  | for (; j < network->rates_ex_len; j++) { | 
|  | rate = network->rates_ex[j] & 0x7F; | 
|  | /* Bit rate given in 500 kb/s units (+ 0x80) */ | 
|  | iwe.u.bitrate.value = ((rate & 0x7f) * 500000); | 
|  | /* Add new value to event */ | 
|  | current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); | 
|  | } | 
|  | /* Check if we added any rate */ | 
|  | if((current_val - start) > IW_EV_LCP_LEN) | 
|  | start = current_val; | 
|  |  | 
|  | /* Add quality statistics */ | 
|  | iwe.cmd = IWEVQUAL; | 
|  | iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | | 
|  | IW_QUAL_NOISE_UPDATED; | 
|  |  | 
|  | if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) { | 
|  | iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID | | 
|  | IW_QUAL_LEVEL_INVALID; | 
|  | iwe.u.qual.qual = 0; | 
|  | } else { | 
|  | if (ieee->perfect_rssi == ieee->worst_rssi) | 
|  | iwe.u.qual.qual = 100; | 
|  | else | 
|  | iwe.u.qual.qual = | 
|  | (100 * | 
|  | (ieee->perfect_rssi - ieee->worst_rssi) * | 
|  | (ieee->perfect_rssi - ieee->worst_rssi) - | 
|  | (ieee->perfect_rssi - network->stats.rssi) * | 
|  | (15 * (ieee->perfect_rssi - ieee->worst_rssi) + | 
|  | 62 * (ieee->perfect_rssi - | 
|  | network->stats.rssi))) / | 
|  | ((ieee->perfect_rssi - | 
|  | ieee->worst_rssi) * (ieee->perfect_rssi - | 
|  | ieee->worst_rssi)); | 
|  | if (iwe.u.qual.qual > 100) | 
|  | iwe.u.qual.qual = 100; | 
|  | else if (iwe.u.qual.qual < 1) | 
|  | iwe.u.qual.qual = 0; | 
|  | } | 
|  |  | 
|  | if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) { | 
|  | iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID; | 
|  | iwe.u.qual.noise = 0; | 
|  | } else { | 
|  | iwe.u.qual.noise = network->stats.noise; | 
|  | } | 
|  |  | 
|  | if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) { | 
|  | iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID; | 
|  | iwe.u.qual.level = 0; | 
|  | } else { | 
|  | iwe.u.qual.level = network->stats.signal; | 
|  | } | 
|  |  | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); | 
|  |  | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | p = custom; | 
|  |  | 
|  | iwe.u.data.length = p - custom; | 
|  | if (iwe.u.data.length) | 
|  | start = iwe_stream_add_point(start, stop, &iwe, custom); | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | if (network->wpa_ie_len) { | 
|  | char buf[MAX_WPA_IE_LEN]; | 
|  | memcpy(buf, network->wpa_ie, network->wpa_ie_len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = network->wpa_ie_len; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, buf); | 
|  | } | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | if (network->rsn_ie_len) { | 
|  | char buf[MAX_WPA_IE_LEN]; | 
|  | memcpy(buf, network->rsn_ie, network->rsn_ie_len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = network->rsn_ie_len; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, buf); | 
|  | } | 
|  |  | 
|  | /* Add EXTRA: Age to display seconds since last beacon/probe response | 
|  | * for given network. */ | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | p = custom; | 
|  | p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), | 
|  | " Last beacon: %dms ago", | 
|  | jiffies_to_msecs(jiffies - network->last_scanned)); | 
|  | iwe.u.data.length = p - custom; | 
|  | if (iwe.u.data.length) | 
|  | start = iwe_stream_add_point(start, stop, &iwe, custom); | 
|  |  | 
|  | /* Add spectrum management information */ | 
|  | iwe.cmd = -1; | 
|  | p = custom; | 
|  | p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Channel flags: "); | 
|  |  | 
|  | if (ieee80211_get_channel_flags(ieee, network->channel) & | 
|  | IEEE80211_CH_INVALID) { | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "INVALID "); | 
|  | } | 
|  |  | 
|  | if (ieee80211_get_channel_flags(ieee, network->channel) & | 
|  | IEEE80211_CH_RADAR_DETECT) { | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "DFS "); | 
|  | } | 
|  |  | 
|  | if (iwe.cmd == IWEVCUSTOM) { | 
|  | iwe.u.data.length = p - custom; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, custom); | 
|  | } | 
|  |  | 
|  | return start; | 
|  | } | 
|  |  | 
|  | #define SCAN_ITEM_SIZE 128 | 
|  |  | 
|  | int ieee80211_wx_get_scan(struct ieee80211_device *ieee, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct ieee80211_network *network; | 
|  | unsigned long flags; | 
|  | int err = 0; | 
|  |  | 
|  | char *ev = extra; | 
|  | char *stop = ev + wrqu->data.length; | 
|  | int i = 0; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | IEEE80211_DEBUG_WX("Getting scan\n"); | 
|  |  | 
|  | spin_lock_irqsave(&ieee->lock, flags); | 
|  |  | 
|  | list_for_each_entry(network, &ieee->network_list, list) { | 
|  | i++; | 
|  | if (stop - ev < SCAN_ITEM_SIZE) { | 
|  | err = -E2BIG; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ieee->scan_age == 0 || | 
|  | time_after(network->last_scanned + ieee->scan_age, jiffies)) | 
|  | ev = ieee80211_translate_scan(ieee, ev, stop, network); | 
|  | else | 
|  | IEEE80211_DEBUG_SCAN("Not showing network '%s (" | 
|  | "%s)' due to age (%dms).\n", | 
|  | escape_essid(network->ssid, | 
|  | network->ssid_len), | 
|  | print_mac(mac, network->bssid), | 
|  | jiffies_to_msecs(jiffies - | 
|  | network-> | 
|  | last_scanned)); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&ieee->lock, flags); | 
|  |  | 
|  | wrqu->data.length = ev - extra; | 
|  | wrqu->data.flags = 0; | 
|  |  | 
|  | IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_set_encode(struct ieee80211_device *ieee, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *keybuf) | 
|  | { | 
|  | struct iw_point *erq = &(wrqu->encoding); | 
|  | struct net_device *dev = ieee->dev; | 
|  | struct ieee80211_security sec = { | 
|  | .flags = 0 | 
|  | }; | 
|  | int i, key, key_provided, len; | 
|  | struct ieee80211_crypt_data **crypt; | 
|  | int host_crypto = ieee->host_encrypt || ieee->host_decrypt || ieee->host_build_iv; | 
|  |  | 
|  | IEEE80211_DEBUG_WX("SET_ENCODE\n"); | 
|  |  | 
|  | key = erq->flags & IW_ENCODE_INDEX; | 
|  | if (key) { | 
|  | if (key > WEP_KEYS) | 
|  | return -EINVAL; | 
|  | key--; | 
|  | key_provided = 1; | 
|  | } else { | 
|  | key_provided = 0; | 
|  | key = ieee->tx_keyidx; | 
|  | } | 
|  |  | 
|  | IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ? | 
|  | "provided" : "default"); | 
|  |  | 
|  | crypt = &ieee->crypt[key]; | 
|  |  | 
|  | if (erq->flags & IW_ENCODE_DISABLED) { | 
|  | if (key_provided && *crypt) { | 
|  | IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n", | 
|  | key); | 
|  | ieee80211_crypt_delayed_deinit(ieee, crypt); | 
|  | } else | 
|  | IEEE80211_DEBUG_WX("Disabling encryption.\n"); | 
|  |  | 
|  | /* Check all the keys to see if any are still configured, | 
|  | * and if no key index was provided, de-init them all */ | 
|  | for (i = 0; i < WEP_KEYS; i++) { | 
|  | if (ieee->crypt[i] != NULL) { | 
|  | if (key_provided) | 
|  | break; | 
|  | ieee80211_crypt_delayed_deinit(ieee, | 
|  | &ieee->crypt[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i == WEP_KEYS) { | 
|  | sec.enabled = 0; | 
|  | sec.encrypt = 0; | 
|  | sec.level = SEC_LEVEL_0; | 
|  | sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT; | 
|  | } | 
|  |  | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | sec.enabled = 1; | 
|  | sec.encrypt = 1; | 
|  | sec.flags |= SEC_ENABLED | SEC_ENCRYPT; | 
|  |  | 
|  | if (*crypt != NULL && (*crypt)->ops != NULL && | 
|  | strcmp((*crypt)->ops->name, "WEP") != 0) { | 
|  | /* changing to use WEP; deinit previously used algorithm | 
|  | * on this key */ | 
|  | ieee80211_crypt_delayed_deinit(ieee, crypt); | 
|  | } | 
|  |  | 
|  | if (*crypt == NULL && host_crypto) { | 
|  | struct ieee80211_crypt_data *new_crypt; | 
|  |  | 
|  | /* take WEP into use */ | 
|  | new_crypt = kzalloc(sizeof(struct ieee80211_crypt_data), | 
|  | GFP_KERNEL); | 
|  | if (new_crypt == NULL) | 
|  | return -ENOMEM; | 
|  | new_crypt->ops = ieee80211_get_crypto_ops("WEP"); | 
|  | if (!new_crypt->ops) { | 
|  | request_module("ieee80211_crypt_wep"); | 
|  | new_crypt->ops = ieee80211_get_crypto_ops("WEP"); | 
|  | } | 
|  |  | 
|  | if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) | 
|  | new_crypt->priv = new_crypt->ops->init(key); | 
|  |  | 
|  | if (!new_crypt->ops || !new_crypt->priv) { | 
|  | kfree(new_crypt); | 
|  | new_crypt = NULL; | 
|  |  | 
|  | printk(KERN_WARNING "%s: could not initialize WEP: " | 
|  | "load module ieee80211_crypt_wep\n", dev->name); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | *crypt = new_crypt; | 
|  | } | 
|  |  | 
|  | /* If a new key was provided, set it up */ | 
|  | if (erq->length > 0) { | 
|  | len = erq->length <= 5 ? 5 : 13; | 
|  | memcpy(sec.keys[key], keybuf, erq->length); | 
|  | if (len > erq->length) | 
|  | memset(sec.keys[key] + erq->length, 0, | 
|  | len - erq->length); | 
|  | IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n", | 
|  | key, escape_essid(sec.keys[key], len), | 
|  | erq->length, len); | 
|  | sec.key_sizes[key] = len; | 
|  | if (*crypt) | 
|  | (*crypt)->ops->set_key(sec.keys[key], len, NULL, | 
|  | (*crypt)->priv); | 
|  | sec.flags |= (1 << key); | 
|  | /* This ensures a key will be activated if no key is | 
|  | * explicitly set */ | 
|  | if (key == sec.active_key) | 
|  | sec.flags |= SEC_ACTIVE_KEY; | 
|  |  | 
|  | } else { | 
|  | if (host_crypto) { | 
|  | len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN, | 
|  | NULL, (*crypt)->priv); | 
|  | if (len == 0) { | 
|  | /* Set a default key of all 0 */ | 
|  | IEEE80211_DEBUG_WX("Setting key %d to all " | 
|  | "zero.\n", key); | 
|  | memset(sec.keys[key], 0, 13); | 
|  | (*crypt)->ops->set_key(sec.keys[key], 13, NULL, | 
|  | (*crypt)->priv); | 
|  | sec.key_sizes[key] = 13; | 
|  | sec.flags |= (1 << key); | 
|  | } | 
|  | } | 
|  | /* No key data - just set the default TX key index */ | 
|  | if (key_provided) { | 
|  | IEEE80211_DEBUG_WX("Setting key %d to default Tx " | 
|  | "key.\n", key); | 
|  | ieee->tx_keyidx = key; | 
|  | sec.active_key = key; | 
|  | sec.flags |= SEC_ACTIVE_KEY; | 
|  | } | 
|  | } | 
|  | if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) { | 
|  | ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); | 
|  | sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : | 
|  | WLAN_AUTH_SHARED_KEY; | 
|  | sec.flags |= SEC_AUTH_MODE; | 
|  | IEEE80211_DEBUG_WX("Auth: %s\n", | 
|  | sec.auth_mode == WLAN_AUTH_OPEN ? | 
|  | "OPEN" : "SHARED KEY"); | 
|  | } | 
|  |  | 
|  | /* For now we just support WEP, so only set that security level... | 
|  | * TODO: When WPA is added this is one place that needs to change */ | 
|  | sec.flags |= SEC_LEVEL; | 
|  | sec.level = SEC_LEVEL_1;	/* 40 and 104 bit WEP */ | 
|  | sec.encode_alg[key] = SEC_ALG_WEP; | 
|  |  | 
|  | done: | 
|  | if (ieee->set_security) | 
|  | ieee->set_security(dev, &sec); | 
|  |  | 
|  | /* Do not reset port if card is in Managed mode since resetting will | 
|  | * generate new IEEE 802.11 authentication which may end up in looping | 
|  | * with IEEE 802.1X.  If your hardware requires a reset after WEP | 
|  | * configuration (for example... Prism2), implement the reset_port in | 
|  | * the callbacks structures used to initialize the 802.11 stack. */ | 
|  | if (ieee->reset_on_keychange && | 
|  | ieee->iw_mode != IW_MODE_INFRA && | 
|  | ieee->reset_port && ieee->reset_port(dev)) { | 
|  | printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_get_encode(struct ieee80211_device *ieee, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *keybuf) | 
|  | { | 
|  | struct iw_point *erq = &(wrqu->encoding); | 
|  | int len, key; | 
|  | struct ieee80211_crypt_data *crypt; | 
|  | struct ieee80211_security *sec = &ieee->sec; | 
|  |  | 
|  | IEEE80211_DEBUG_WX("GET_ENCODE\n"); | 
|  |  | 
|  | key = erq->flags & IW_ENCODE_INDEX; | 
|  | if (key) { | 
|  | if (key > WEP_KEYS) | 
|  | return -EINVAL; | 
|  | key--; | 
|  | } else | 
|  | key = ieee->tx_keyidx; | 
|  |  | 
|  | crypt = ieee->crypt[key]; | 
|  | erq->flags = key + 1; | 
|  |  | 
|  | if (!sec->enabled) { | 
|  | erq->length = 0; | 
|  | erq->flags |= IW_ENCODE_DISABLED; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | len = sec->key_sizes[key]; | 
|  | memcpy(keybuf, sec->keys[key], len); | 
|  |  | 
|  | erq->length = len; | 
|  | erq->flags |= IW_ENCODE_ENABLED; | 
|  |  | 
|  | if (ieee->open_wep) | 
|  | erq->flags |= IW_ENCODE_OPEN; | 
|  | else | 
|  | erq->flags |= IW_ENCODE_RESTRICTED; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct net_device *dev = ieee->dev; | 
|  | struct iw_point *encoding = &wrqu->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | int i, idx, ret = 0; | 
|  | int group_key = 0; | 
|  | const char *alg, *module; | 
|  | struct ieee80211_crypto_ops *ops; | 
|  | struct ieee80211_crypt_data **crypt; | 
|  |  | 
|  | struct ieee80211_security sec = { | 
|  | .flags = 0, | 
|  | }; | 
|  |  | 
|  | idx = encoding->flags & IW_ENCODE_INDEX; | 
|  | if (idx) { | 
|  | if (idx < 1 || idx > WEP_KEYS) | 
|  | return -EINVAL; | 
|  | idx--; | 
|  | } else | 
|  | idx = ieee->tx_keyidx; | 
|  |  | 
|  | if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { | 
|  | crypt = &ieee->crypt[idx]; | 
|  | group_key = 1; | 
|  | } else { | 
|  | /* some Cisco APs use idx>0 for unicast in dynamic WEP */ | 
|  | if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP) | 
|  | return -EINVAL; | 
|  | if (ieee->iw_mode == IW_MODE_INFRA) | 
|  | crypt = &ieee->crypt[idx]; | 
|  | else | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | sec.flags |= SEC_ENABLED | SEC_ENCRYPT; | 
|  | if ((encoding->flags & IW_ENCODE_DISABLED) || | 
|  | ext->alg == IW_ENCODE_ALG_NONE) { | 
|  | if (*crypt) | 
|  | ieee80211_crypt_delayed_deinit(ieee, crypt); | 
|  |  | 
|  | for (i = 0; i < WEP_KEYS; i++) | 
|  | if (ieee->crypt[i] != NULL) | 
|  | break; | 
|  |  | 
|  | if (i == WEP_KEYS) { | 
|  | sec.enabled = 0; | 
|  | sec.encrypt = 0; | 
|  | sec.level = SEC_LEVEL_0; | 
|  | sec.flags |= SEC_LEVEL; | 
|  | } | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | sec.enabled = 1; | 
|  | sec.encrypt = 1; | 
|  |  | 
|  | if (group_key ? !ieee->host_mc_decrypt : | 
|  | !(ieee->host_encrypt || ieee->host_decrypt || | 
|  | ieee->host_encrypt_msdu)) | 
|  | goto skip_host_crypt; | 
|  |  | 
|  | switch (ext->alg) { | 
|  | case IW_ENCODE_ALG_WEP: | 
|  | alg = "WEP"; | 
|  | module = "ieee80211_crypt_wep"; | 
|  | break; | 
|  | case IW_ENCODE_ALG_TKIP: | 
|  | alg = "TKIP"; | 
|  | module = "ieee80211_crypt_tkip"; | 
|  | break; | 
|  | case IW_ENCODE_ALG_CCMP: | 
|  | alg = "CCMP"; | 
|  | module = "ieee80211_crypt_ccmp"; | 
|  | break; | 
|  | default: | 
|  | IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", | 
|  | dev->name, ext->alg); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | ops = ieee80211_get_crypto_ops(alg); | 
|  | if (ops == NULL) { | 
|  | request_module(module); | 
|  | ops = ieee80211_get_crypto_ops(alg); | 
|  | } | 
|  | if (ops == NULL) { | 
|  | IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", | 
|  | dev->name, ext->alg); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (*crypt == NULL || (*crypt)->ops != ops) { | 
|  | struct ieee80211_crypt_data *new_crypt; | 
|  |  | 
|  | ieee80211_crypt_delayed_deinit(ieee, crypt); | 
|  |  | 
|  | new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL); | 
|  | if (new_crypt == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto done; | 
|  | } | 
|  | new_crypt->ops = ops; | 
|  | if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) | 
|  | new_crypt->priv = new_crypt->ops->init(idx); | 
|  | if (new_crypt->priv == NULL) { | 
|  | kfree(new_crypt); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  | *crypt = new_crypt; | 
|  | } | 
|  |  | 
|  | if (ext->key_len > 0 && (*crypt)->ops->set_key && | 
|  | (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, | 
|  | (*crypt)->priv) < 0) { | 
|  | IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | skip_host_crypt: | 
|  | if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { | 
|  | ieee->tx_keyidx = idx; | 
|  | sec.active_key = idx; | 
|  | sec.flags |= SEC_ACTIVE_KEY; | 
|  | } | 
|  |  | 
|  | if (ext->alg != IW_ENCODE_ALG_NONE) { | 
|  | memcpy(sec.keys[idx], ext->key, ext->key_len); | 
|  | sec.key_sizes[idx] = ext->key_len; | 
|  | sec.flags |= (1 << idx); | 
|  | if (ext->alg == IW_ENCODE_ALG_WEP) { | 
|  | sec.encode_alg[idx] = SEC_ALG_WEP; | 
|  | sec.flags |= SEC_LEVEL; | 
|  | sec.level = SEC_LEVEL_1; | 
|  | } else if (ext->alg == IW_ENCODE_ALG_TKIP) { | 
|  | sec.encode_alg[idx] = SEC_ALG_TKIP; | 
|  | sec.flags |= SEC_LEVEL; | 
|  | sec.level = SEC_LEVEL_2; | 
|  | } else if (ext->alg == IW_ENCODE_ALG_CCMP) { | 
|  | sec.encode_alg[idx] = SEC_ALG_CCMP; | 
|  | sec.flags |= SEC_LEVEL; | 
|  | sec.level = SEC_LEVEL_3; | 
|  | } | 
|  | /* Don't set sec level for group keys. */ | 
|  | if (group_key) | 
|  | sec.flags &= ~SEC_LEVEL; | 
|  | } | 
|  | done: | 
|  | if (ieee->set_security) | 
|  | ieee->set_security(ieee->dev, &sec); | 
|  |  | 
|  | /* | 
|  | * Do not reset port if card is in Managed mode since resetting will | 
|  | * generate new IEEE 802.11 authentication which may end up in looping | 
|  | * with IEEE 802.1X. If your hardware requires a reset after WEP | 
|  | * configuration (for example... Prism2), implement the reset_port in | 
|  | * the callbacks structures used to initialize the 802.11 stack. | 
|  | */ | 
|  | if (ieee->reset_on_keychange && | 
|  | ieee->iw_mode != IW_MODE_INFRA && | 
|  | ieee->reset_port && ieee->reset_port(dev)) { | 
|  | IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct iw_point *encoding = &wrqu->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | struct ieee80211_security *sec = &ieee->sec; | 
|  | int idx, max_key_len; | 
|  |  | 
|  | max_key_len = encoding->length - sizeof(*ext); | 
|  | if (max_key_len < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | idx = encoding->flags & IW_ENCODE_INDEX; | 
|  | if (idx) { | 
|  | if (idx < 1 || idx > WEP_KEYS) | 
|  | return -EINVAL; | 
|  | idx--; | 
|  | } else | 
|  | idx = ieee->tx_keyidx; | 
|  |  | 
|  | if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) && | 
|  | ext->alg != IW_ENCODE_ALG_WEP) | 
|  | if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA) | 
|  | return -EINVAL; | 
|  |  | 
|  | encoding->flags = idx + 1; | 
|  | memset(ext, 0, sizeof(*ext)); | 
|  |  | 
|  | if (!sec->enabled) { | 
|  | ext->alg = IW_ENCODE_ALG_NONE; | 
|  | ext->key_len = 0; | 
|  | encoding->flags |= IW_ENCODE_DISABLED; | 
|  | } else { | 
|  | if (sec->encode_alg[idx] == SEC_ALG_WEP) | 
|  | ext->alg = IW_ENCODE_ALG_WEP; | 
|  | else if (sec->encode_alg[idx] == SEC_ALG_TKIP) | 
|  | ext->alg = IW_ENCODE_ALG_TKIP; | 
|  | else if (sec->encode_alg[idx] == SEC_ALG_CCMP) | 
|  | ext->alg = IW_ENCODE_ALG_CCMP; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | ext->key_len = sec->key_sizes[idx]; | 
|  | memcpy(ext->key, sec->keys[idx], ext->key_len); | 
|  | encoding->flags |= IW_ENCODE_ENABLED; | 
|  | if (ext->key_len && | 
|  | (ext->alg == IW_ENCODE_ALG_TKIP || | 
|  | ext->alg == IW_ENCODE_ALG_CCMP)) | 
|  | ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; | 
|  |  | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_set_auth(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, | 
|  | char *extra) | 
|  | { | 
|  | struct ieee80211_device *ieee = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  | int err = 0; | 
|  |  | 
|  | spin_lock_irqsave(&ieee->lock, flags); | 
|  |  | 
|  | switch (wrqu->param.flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_WPA_VERSION: | 
|  | case IW_AUTH_CIPHER_PAIRWISE: | 
|  | case IW_AUTH_CIPHER_GROUP: | 
|  | case IW_AUTH_KEY_MGMT: | 
|  | /* | 
|  | * Host AP driver does not use these parameters and allows | 
|  | * wpa_supplicant to control them internally. | 
|  | */ | 
|  | break; | 
|  | case IW_AUTH_TKIP_COUNTERMEASURES: | 
|  | break;		/* FIXME */ | 
|  | case IW_AUTH_DROP_UNENCRYPTED: | 
|  | ieee->drop_unencrypted = !!wrqu->param.value; | 
|  | break; | 
|  | case IW_AUTH_80211_AUTH_ALG: | 
|  | break;		/* FIXME */ | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | ieee->privacy_invoked = ieee->wpa_enabled = !!wrqu->param.value; | 
|  | break; | 
|  | case IW_AUTH_RX_UNENCRYPTED_EAPOL: | 
|  | ieee->ieee802_1x = !!wrqu->param.value; | 
|  | break; | 
|  | case IW_AUTH_PRIVACY_INVOKED: | 
|  | ieee->privacy_invoked = !!wrqu->param.value; | 
|  | break; | 
|  | default: | 
|  | err = -EOPNOTSUPP; | 
|  | break; | 
|  | } | 
|  | spin_unlock_irqrestore(&ieee->lock, flags); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ieee80211_wx_get_auth(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, | 
|  | char *extra) | 
|  | { | 
|  | struct ieee80211_device *ieee = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  | int err = 0; | 
|  |  | 
|  | spin_lock_irqsave(&ieee->lock, flags); | 
|  |  | 
|  | switch (wrqu->param.flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_WPA_VERSION: | 
|  | case IW_AUTH_CIPHER_PAIRWISE: | 
|  | case IW_AUTH_CIPHER_GROUP: | 
|  | case IW_AUTH_KEY_MGMT: | 
|  | case IW_AUTH_TKIP_COUNTERMEASURES:		/* FIXME */ | 
|  | case IW_AUTH_80211_AUTH_ALG:			/* FIXME */ | 
|  | /* | 
|  | * Host AP driver does not use these parameters and allows | 
|  | * wpa_supplicant to control them internally. | 
|  | */ | 
|  | err = -EOPNOTSUPP; | 
|  | break; | 
|  | case IW_AUTH_DROP_UNENCRYPTED: | 
|  | wrqu->param.value = ieee->drop_unencrypted; | 
|  | break; | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | wrqu->param.value = ieee->wpa_enabled; | 
|  | break; | 
|  | case IW_AUTH_RX_UNENCRYPTED_EAPOL: | 
|  | wrqu->param.value = ieee->ieee802_1x; | 
|  | break; | 
|  | default: | 
|  | err = -EOPNOTSUPP; | 
|  | break; | 
|  | } | 
|  | spin_unlock_irqrestore(&ieee->lock, flags); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(ieee80211_wx_set_encodeext); | 
|  | EXPORT_SYMBOL(ieee80211_wx_get_encodeext); | 
|  |  | 
|  | EXPORT_SYMBOL(ieee80211_wx_get_scan); | 
|  | EXPORT_SYMBOL(ieee80211_wx_set_encode); | 
|  | EXPORT_SYMBOL(ieee80211_wx_get_encode); | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(ieee80211_wx_set_auth); | 
|  | EXPORT_SYMBOL_GPL(ieee80211_wx_get_auth); |