Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6
* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 88ad615..77ba0af 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -186,6 +186,17 @@
Locking: port_sem taken.
Interrupts: caller dependent.
+ flush_buffer(port)
+ Flush any write buffers, reset any DMA state and stop any
+ ongoing DMA transfers.
+
+ This will be called whenever the port->info->xmit circular
+ buffer is cleared.
+
+ Locking: port->lock taken.
+ Interrupts: locally disabled.
+ This call must not sleep
+
set_termios(port,termios,oldtermios)
Change the port parameters, including word length, parity, stop
bits. Update read_status_mask and ignore_status_mask to indicate
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc8..24b1ad5 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@
* -------------------------------------------------------------------
*/
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
- run_task_queue(&tq_serial);
- printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
static void do_softint(struct work_struct *private_)
{
printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@
info->xmit.head = info->xmit.tail = 0;
local_irq_restore(flags);
- wake_up_interruptible(&tty->write_wait);
-
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
+ tty_wakeup(tty);
}
/*
@@ -404,12 +388,6 @@
printk(KERN_INFO "simrs_unthrottle called\n");
}
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@
}
switch (cmd) {
- case TIOCMGET:
- printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
- return -EINVAL;
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
- return -EINVAL;
case TIOCGSERIAL:
printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
return 0;
@@ -488,14 +458,6 @@
static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- unsigned int cflag = tty->termios->c_cflag;
-
- if ( (cflag == old_termios->c_cflag)
- && ( RELEVANT_IFLAG(tty->termios->c_iflag)
- == RELEVANT_IFLAG(old_termios->c_iflag)))
- return;
-
-
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@
* the line discipline to only process XON/XOFF characters.
*/
shutdown(info);
- if (tty->ops->flush_buffer)
- tty->ops->flush_buffer(tty);
- if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+ rs_flush_buffer(tty);
+ tty_ldisc_flush(tty);
info->event = 0;
info->tty = NULL;
if (info->blocked_open) {
@@ -955,7 +916,6 @@
.stop = rs_stop,
.start = rs_start,
.hangup = rs_hangup,
- .break_ctl = rs_break,
.wait_until_sent = rs_wait_until_sent,
.read_proc = rs_read_proc,
};
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c..8b054e7 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -392,7 +392,7 @@
static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
{
struct uart_icount *icount = &port->uart.icount;
- struct tty_struct *tty = port->uart.info->tty;
+ struct tty_struct *tty = port->uart.info->port.tty;
unsigned ix;
int count;
u8 st, ch, push, status, overrun;
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index e6caf5d..61b6c5b 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -380,9 +380,6 @@
if (acpi_disabled)
return -ENODEV;
- if (acpi_disabled)
- return -ENODEV;
-
/* look for dockable drive bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_bay, &bays, NULL);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 1e872e7..bb7c51f 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -920,9 +920,6 @@
if (acpi_disabled)
return 0;
- if (acpi_disabled)
- return 0;
-
/* look for a dock station */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock, &num, NULL);
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 0f2dd81..2f173e8 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -338,9 +338,6 @@
if (acpi_disabled)
return 0;
- if (acpi_disabled)
- return 0;
-
if (dev) {
rtc_wake_setup();
rtc_info.wake_on = rtc_wake_on;
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index e5cd856..69df187 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -282,8 +282,8 @@
/* FIXME: why is this needed. Note don't use ldisc_ref here as the
open path is before the ldisc is referencable */
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ if (tty->ldisc.ops->flush_buffer)
+ tty->ldisc.ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
return 0;
@@ -514,7 +514,7 @@
static int __init hci_uart_init(void)
{
- static struct tty_ldisc hci_uart_ldisc;
+ static struct tty_ldisc_ops hci_uart_ldisc;
int err;
BT_INFO("HCI UART driver ver %s", VERSION);
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 6bff9d8..e991dc8 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -762,7 +762,7 @@
/*
* This is used to look up the divisor speeds and the timeouts
* We're normally limited to 15 distinct baud rates. The extra
- * are accessed via settings in info->flags.
+ * are accessed via settings in info->port.flags.
* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
* 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
* HI VHI
@@ -1003,7 +1003,7 @@
cy_writeb(base_addr + (CyCAR << index), save_xir);
/* if there is nowhere to put the data, discard it */
- if (info->tty == NULL) {
+ if (info->port.tty == NULL) {
if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
CyIVRRxEx) { /* exception */
data = readb(base_addr + (CyRDSR << index));
@@ -1015,7 +1015,7 @@
goto end;
}
/* there is an open port for this data */
- tty = info->tty;
+ tty = info->port.tty;
if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
CyIVRRxEx) { /* exception */
data = readb(base_addr + (CyRDSR << index));
@@ -1041,7 +1041,7 @@
readb(base_addr + (CyRDSR <<
index)), TTY_BREAK);
info->icount.rx++;
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (data & CyFRAME) {
tty_insert_flip_char(tty,
@@ -1145,7 +1145,7 @@
goto end;
}
info = &cinfo->ports[channel + chip * 4];
- if (info->tty == NULL) {
+ if (info->port.tty == NULL) {
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) & ~CyTxRdy);
goto end;
@@ -1190,13 +1190,13 @@
}
goto done;
}
- if (info->xmit_buf == NULL) {
+ if (info->port.xmit_buf == NULL) {
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) &
~CyTxRdy);
goto done;
}
- if (info->tty->stopped || info->tty->hw_stopped) {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) &
~CyTxRdy);
@@ -1211,7 +1211,7 @@
* character. This is necessary because there may not be room
* for the two chars needed to send a NULL.)
*/
- outch = info->xmit_buf[info->xmit_tail];
+ outch = info->port.xmit_buf[info->xmit_tail];
if (outch) {
info->xmit_cnt--;
info->xmit_tail = (info->xmit_tail + 1) &
@@ -1232,7 +1232,7 @@
}
done:
- tty_wakeup(info->tty);
+ tty_wakeup(info->port.tty);
end:
/* end of service */
cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
@@ -1256,7 +1256,7 @@
mdm_change = readb(base_addr + (CyMISR << index));
mdm_status = readb(base_addr + (CyMSVR1 << index));
- if (!info->tty)
+ if (!info->port.tty)
goto end;
if (mdm_change & CyANY_DELTA) {
@@ -1273,29 +1273,29 @@
wake_up_interruptible(&info->delta_msr_wait);
}
- if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) {
+ if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
if (!(mdm_status & CyDCD)) {
- tty_hangup(info->tty);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ tty_hangup(info->port.tty);
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) {
- if (info->tty->hw_stopped) {
+ if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+ if (info->port.tty->hw_stopped) {
if (mdm_status & CyCTS) {
/* cy_start isn't used
because... !!! */
- info->tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) |
CyTxRdy);
- tty_wakeup(info->tty);
+ tty_wakeup(info->port.tty);
}
} else {
if (!(mdm_status & CyCTS)) {
/* cy_stop isn't used
because ... !!! */
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) &
~CyTxRdy);
@@ -1449,7 +1449,7 @@
struct BUF_CTRL __iomem *buf_ctrl)
{
struct cyclades_card *cinfo = info->card;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned int char_count;
int len;
#ifdef BLOCKMOVE
@@ -1542,7 +1542,7 @@
struct BUF_CTRL __iomem *buf_ctrl)
{
struct cyclades_card *cinfo = info->card;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
u8 data;
unsigned int char_count;
#ifdef BLOCKMOVE
@@ -1585,7 +1585,7 @@
memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
tx_put),
- &info->xmit_buf[info->xmit_tail],
+ &info->port.xmit_buf[info->xmit_tail],
small_count);
tx_put = (tx_put + small_count) & (tx_bufsize - 1);
@@ -1597,7 +1597,7 @@
}
#else
while (info->xmit_cnt && char_count) {
- data = info->xmit_buf[info->xmit_tail];
+ data = info->port.xmit_buf[info->xmit_tail];
info->xmit_cnt--;
info->xmit_tail = (info->xmit_tail + 1) &
(SERIAL_XMIT_SIZE - 1);
@@ -1642,7 +1642,7 @@
special_count = 0;
delta_count = 0;
info = &cinfo->ports[channel];
- tty = info->tty;
+ tty = info->port.tty;
if (tty == NULL)
continue;
@@ -1668,15 +1668,15 @@
case C_CM_MDCD:
info->icount.dcd++;
delta_count++;
- if (info->flags & ASYNC_CHECK_CD) {
+ if (info->port.flags & ASYNC_CHECK_CD) {
if ((fw_ver > 241 ? ((u_long) param) :
readl(&ch_ctrl->rs_status)) &
C_RS_DCD) {
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
} else {
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ tty_hangup(info->port.tty);
+ wake_up_interruptible(&info->port.open_wait);
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
}
}
break;
@@ -1814,7 +1814,7 @@
for (port = 0; port < cinfo->nports; port++) {
info = &cinfo->ports[port];
- tty = info->tty;
+ tty = info->port.tty;
buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
if (!info->throttle)
@@ -1853,22 +1853,22 @@
spin_lock_irqsave(&card->card_lock, flags);
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
free_page(page);
goto errout;
}
if (!info->type) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
free_page(page);
goto errout;
}
- if (info->xmit_buf)
+ if (info->port.xmit_buf)
free_page(page);
else
- info->xmit_buf = (unsigned char *)page;
+ info->port.xmit_buf = (unsigned char *)page;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -1909,10 +1909,10 @@
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) | CyRxData);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->breakon = info->breakoff = 0;
memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -1994,9 +1994,9 @@
/* enable send, recv, modem !!! */
- info->flags |= ASYNC_INITIALIZED;
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->port.flags |= ASYNC_INITIALIZED;
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
info->breakon = info->breakoff = 0;
memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -2065,7 +2065,7 @@
void __iomem *base_addr;
int chip, channel, index;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
card = info->card;
@@ -2087,14 +2087,14 @@
/* Clear delta_msr_wait queue to avoid mem leaks. */
wake_up_interruptible(&info->delta_msr_wait);
- if (info->xmit_buf) {
+ if (info->port.xmit_buf) {
unsigned char *temp;
- temp = info->xmit_buf;
- info->xmit_buf = NULL;
+ temp = info->port.xmit_buf;
+ info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
#ifdef CY_DEBUG_DTR
@@ -2108,9 +2108,9 @@
/* it may be appropriate to clear _XMIT at
some later date (after testing)!!! */
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
struct FIRM_ID __iomem *firm_id;
@@ -2136,14 +2136,14 @@
spin_lock_irqsave(&card->card_lock, flags);
- if (info->xmit_buf) {
+ if (info->port.xmit_buf) {
unsigned char *temp;
- temp = info->xmit_buf;
- info->xmit_buf = NULL;
+ temp = info->port.xmit_buf;
+ info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
cy_writel(&ch_ctrl[channel].rs_control,
(__u32)(readl(&ch_ctrl[channel].rs_control) &
~(C_RS_RTS | C_RS_DTR)));
@@ -2158,9 +2158,9 @@
#endif
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
}
@@ -2194,10 +2194,10 @@
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
- !(info->flags & ASYNC_CLOSING));
- return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
+ wait_event_interruptible(info->port.close_wait,
+ !(info->port.flags & ASYNC_CLOSING));
+ return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
@@ -2206,32 +2206,32 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* cy_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
- "count = %d\n", info->line, info->count);
+ "count = %d\n", info->line, info->port.count);
#endif
spin_lock_irqsave(&cinfo->card_lock, flags);
if (!tty_hung_up_p(filp))
- info->count--;
+ info->port.count--;
spin_unlock_irqrestore(&cinfo->card_lock, flags);
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
- "%d\n", current->pid, info->count);
+ "%d\n", current->pid, info->port.count);
#endif
- info->blocked_open++;
+ info->port.blocked_open++;
if (!IS_CYC_Z(*cinfo)) {
chip = channel >> 2;
@@ -2260,8 +2260,8 @@
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ !(info->port.flags & ASYNC_INITIALIZED)) {
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
break;
}
@@ -2269,7 +2269,7 @@
spin_lock_irqsave(&cinfo->card_lock, flags);
cy_writeb(base_addr + (CyCAR << index),
(u_char) channel);
- if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+ if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
(readb(base_addr +
(CyMSVR1 << index)) & CyDCD))) {
spin_unlock_irqrestore(&cinfo->card_lock, flags);
@@ -2284,7 +2284,7 @@
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc block_til_ready blocking: "
"ttyC%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
schedule();
}
@@ -2298,7 +2298,7 @@
firm_id = base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
return -EINVAL;
}
@@ -2327,12 +2327,12 @@
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ !(info->port.flags & ASYNC_INITIALIZED)) {
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
break;
}
- if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+ if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
(readl(&ch_ctrl[channel].rs_status) &
C_RS_DCD))) {
break;
@@ -2344,28 +2344,28 @@
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc block_til_ready blocking: "
"ttyC%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
schedule();
}
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (!tty_hung_up_p(filp)) {
- info->count++;
+ info->port.count++;
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
- "count to %d\n", current->pid, info->count);
+ "count to %d\n", current->pid, info->port.count);
#endif
}
- info->blocked_open--;
+ info->port.blocked_open--;
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
- "count = %d\n", info->line, info->count);
+ "count = %d\n", info->line, info->port.count);
#endif
if (retval)
return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
} /* block_til_ready */
@@ -2456,27 +2456,27 @@
printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
#endif
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
if (serial_paranoia_check(info, tty->name, "cy_open"))
return -ENODEV;
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
- info->count);
+ info->port.count);
#endif
- info->count++;
+ info->port.count++;
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
- current->pid, info->count);
+ current->pid, info->port.count);
#endif
/*
* If the port is the middle of closing, bail out now
*/
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
- !(info->flags & ASYNC_CLOSING));
- return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
+ wait_event_interruptible(info->port.close_wait,
+ !(info->port.flags & ASYNC_CLOSING));
+ return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
@@ -2641,9 +2641,9 @@
}
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
- info->count);
+ info->port.count);
#endif
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -2652,24 +2652,24 @@
* serial port won't be shutdown.
*/
printk(KERN_ERR "cyc:cy_close: bad serial port count; "
- "tty->count is 1, info->count is %d\n", info->count);
- info->count = 1;
+ "tty->count is 1, info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n",
- current->pid, info->count - 1);
+ current->pid, info->port.count - 1);
#endif
- if (--info->count < 0) {
+ if (--info->port.count < 0) {
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
#endif
- info->count = 0;
+ info->port.count = 0;
}
- if (info->count) {
+ if (info->port.count) {
spin_unlock_irqrestore(&card->card_lock, flags);
return;
}
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
@@ -2677,8 +2677,8 @@
*/
tty->closing = 1;
spin_unlock_irqrestore(&card->card_lock, flags);
- if (info->closing_wait != CY_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
+ if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->port.closing_wait);
spin_lock_irqsave(&card->card_lock, flags);
@@ -2692,7 +2692,7 @@
cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) & ~CyRxData);
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
/* Waiting for on-board buffers to be empty before
closing the port */
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2731,18 +2731,18 @@
spin_lock_irqsave(&card->card_lock, flags);
tty->closing = 0;
- info->tty = NULL;
- if (info->blocked_open) {
+ info->port.tty = NULL;
+ if (info->port.blocked_open) {
spin_unlock_irqrestore(&card->card_lock, flags);
- if (info->close_delay) {
+ if (info->port.close_delay) {
msleep_interruptible(jiffies_to_msecs
- (info->close_delay));
+ (info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
spin_lock_irqsave(&card->card_lock, flags);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&info->port.close_wait);
#ifdef CY_DEBUG_OTHER
printk(KERN_DEBUG "cyc:cy_close done\n");
@@ -2777,7 +2777,7 @@
if (serial_paranoia_check(info, tty->name, "cy_write"))
return 0;
- if (!info->xmit_buf)
+ if (!info->port.xmit_buf)
return 0;
spin_lock_irqsave(&info->card->card_lock, flags);
@@ -2788,7 +2788,7 @@
if (c <= 0)
break;
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) &
(SERIAL_XMIT_SIZE - 1);
info->xmit_cnt += c;
@@ -2826,7 +2826,7 @@
if (serial_paranoia_check(info, tty->name, "cy_put_char"))
return 0;
- if (!info->xmit_buf)
+ if (!info->port.xmit_buf)
return 0;
spin_lock_irqsave(&info->card->card_lock, flags);
@@ -2835,7 +2835,7 @@
return 0;
}
- info->xmit_buf[info->xmit_head++] = ch;
+ info->port.xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE - 1;
info->xmit_cnt++;
info->idle_stats.xmit_bytes++;
@@ -2860,7 +2860,7 @@
return;
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
+ !info->port.xmit_buf)
return;
start_xmit(info);
@@ -2988,27 +2988,27 @@
int baud, baud_rate = 0;
int i;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
if (info->line == -1)
return;
- cflag = info->tty->termios->c_cflag;
- iflag = info->tty->termios->c_iflag;
+ cflag = info->port.tty->termios->c_cflag;
+ iflag = info->port.tty->termios->c_iflag;
/*
* Set up the tty->alt_speed kludge
*/
- if (info->tty) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
+ if (info->port.tty) {
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->port.tty->alt_speed = 57600;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->port.tty->alt_speed = 115200;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->port.tty->alt_speed = 230400;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->port.tty->alt_speed = 460800;
}
card = info->card;
@@ -3020,8 +3020,8 @@
index = card->bus_index;
/* baud rate */
- baud = tty_get_baud_rate(info->tty);
- if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ baud = tty_get_baud_rate(info->port.tty);
+ if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
if (info->custom_divisor)
baud_rate = info->baud / info->custom_divisor;
@@ -3038,7 +3038,7 @@
if (i == 20)
i = 19; /* CD1400_MAX_SPEED */
- if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
cyy_baud_calc(info, baud_rate);
} else {
@@ -3059,7 +3059,7 @@
/* get it right for 134.5 baud */
info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2;
- } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
info->timeout = (info->xmit_fifo_size * HZ * 15 /
baud_rate) + 2;
@@ -3108,16 +3108,16 @@
/* CTS flow control flag */
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
info->cor2 |= CyCtsAE;
} else {
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
info->cor2 &= ~CyCtsAE;
}
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/***********************************************
The hardware option, CyRtsAO, presents RTS when
@@ -3146,8 +3146,8 @@
/* set line characteristics according configuration */
cy_writeb(base_addr + (CySCHR1 << index),
- START_CHAR(info->tty));
- cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty));
+ START_CHAR(info->port.tty));
+ cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
@@ -3163,7 +3163,7 @@
(info->default_timeout ? info->default_timeout : 0x02));
/* 10ms rx timeout */
- if (C_CLOCAL(info->tty)) {
+ if (C_CLOCAL(info->port.tty)) {
/* without modem intr */
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) | CyMdmCh);
@@ -3226,8 +3226,8 @@
#endif
}
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
@@ -3250,8 +3250,8 @@
buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
/* baud rate */
- baud = tty_get_baud_rate(info->tty);
- if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ baud = tty_get_baud_rate(info->port.tty);
+ if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
if (info->custom_divisor)
baud_rate = info->baud / info->custom_divisor;
@@ -3266,7 +3266,7 @@
/* get it right for 134.5 baud */
info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2;
- } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
info->timeout = (info->xmit_fifo_size * HZ * 15 /
baud_rate) + 2;
@@ -3318,7 +3318,7 @@
}
/* As the HW flow control is done in firmware, the driver
doesn't need to care about it */
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
/* XON/XOFF/XANY flow control flags */
sw_flow = 0;
@@ -3337,9 +3337,9 @@
/* CD sensitivity */
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
if (baud == 0) { /* baud rate is zero, turn off line */
cy_writel(&ch_ctrl->rs_control,
@@ -3361,8 +3361,8 @@
"was %x\n", info->line, retval);
}
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
}
} /* set_line_char */
@@ -3381,9 +3381,9 @@
tmp.port = (info->card - cy_card) * 0x100 + info->line -
cinfo->first_line;
tmp.irq = cinfo->irq;
- tmp.flags = info->flags;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
+ tmp.flags = info->port.flags;
+ tmp.close_delay = info->port.close_delay;
+ tmp.closing_wait = info->port.closing_wait;
tmp.baud_base = info->baud;
tmp.custom_divisor = info->custom_divisor;
tmp.hub6 = 0; /*!!! */
@@ -3402,13 +3402,13 @@
old_info = *info;
if (!capable(CAP_SYS_ADMIN)) {
- if (new_serial.close_delay != info->close_delay ||
+ if (new_serial.close_delay != info->port.close_delay ||
new_serial.baud_base != info->baud ||
(new_serial.flags & ASYNC_FLAGS &
~ASYNC_USR_MASK) !=
- (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+ (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
return -EPERM;
- info->flags = (info->flags & ~ASYNC_USR_MASK) |
+ info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK);
info->baud = new_serial.baud_base;
info->custom_divisor = new_serial.custom_divisor;
@@ -3422,13 +3422,13 @@
info->baud = new_serial.baud_base;
info->custom_divisor = new_serial.custom_divisor;
- info->flags = (info->flags & ~ASYNC_FLAGS) |
+ info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS);
- info->close_delay = new_serial.close_delay * HZ / 100;
- info->closing_wait = new_serial.closing_wait * HZ / 100;
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
+ info->port.closing_wait = new_serial.closing_wait * HZ / 100;
check_and_exit:
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
set_line_char(info);
return 0;
} else {
@@ -3971,11 +3971,11 @@
break;
#endif /* CONFIG_CYZ_INTR */
case CYSETWAIT:
- info->closing_wait = (unsigned short)arg * HZ / 100;
+ info->port.closing_wait = (unsigned short)arg * HZ / 100;
ret_val = 0;
break;
case CYGETWAIT:
- ret_val = info->closing_wait / (HZ / 100);
+ ret_val = info->port.closing_wait / (HZ / 100);
break;
case TIOCGSERIAL:
ret_val = get_serial_info(info, argp);
@@ -4097,7 +4097,7 @@
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
#endif
} /* cy_set_termios */
@@ -4326,14 +4326,14 @@
cy_flush_buffer(tty);
shutdown(info);
- info->count = 0;
+ info->port.count = 0;
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
current->pid);
#endif
- info->tty = NULL;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- wake_up_interruptible(&info->open_wait);
+ info->port.tty = NULL;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ wake_up_interruptible(&info->port.open_wait);
} /* cy_hangup */
/*
@@ -4376,15 +4376,14 @@
for (port = cinfo->first_line; port < cinfo->first_line + nports;
port++) {
info = &cinfo->ports[port - cinfo->first_line];
+ tty_port_init(&info->port);
info->magic = CYCLADES_MAGIC;
info->card = cinfo;
info->line = port;
- info->flags = STD_COM_FLAGS;
- info->closing_wait = CLOSING_WAIT_DELAY;
- info->close_delay = 5 * HZ / 10;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ info->port.closing_wait = CLOSING_WAIT_DELAY;
+ info->port.close_delay = 5 * HZ / 10;
+ info->port.flags = STD_COM_FLAGS;
init_completion(&info->shutdown_wait);
init_waitqueue_head(&info->delta_msr_wait);
@@ -5237,7 +5236,7 @@
for (j = 0; j < cy_card[i].nports; j++) {
info = &cy_card[i].ports[j];
- if (info->count)
+ if (info->port.count)
size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n", info->line,
(cur_jifs - info->idle_stats.in_use) /
@@ -5246,7 +5245,8 @@
HZ, info->idle_stats.recv_bytes,
(cur_jifs - info->idle_stats.recv_idle)/
HZ, info->idle_stats.overruns,
- (long)info->tty->ldisc.num);
+ /* FIXME: double check locking */
+ (long)info->port.tty->ldisc.ops->num);
else
size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n",
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 60a4df7..ac9995f 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -432,7 +432,7 @@
spin_unlock_irqrestore(&epca_lock, flags);
return;
}
- if (ch->count-- > 1) {
+ if (ch->port.count-- > 1) {
/* Begin channel is open more than once */
/*
* Return without doing anything. Someone might still
@@ -442,19 +442,19 @@
return;
}
/* Port open only once go ahead with shutdown & reset */
- BUG_ON(ch->count < 0);
+ BUG_ON(ch->port.count < 0);
/*
* Let the rest of the driver know the channel is being closed.
* This becomes important if an open is attempted before close
* is finished.
*/
- ch->asyncflags |= ASYNC_CLOSING;
+ ch->port.flags |= ASYNC_CLOSING;
tty->closing = 1;
spin_unlock_irqrestore(&epca_lock, flags);
- if (ch->asyncflags & ASYNC_INITIALIZED) {
+ if (ch->port.flags & ASYNC_INITIALIZED) {
/* Setup an event to indicate when the
transmit buffer empties */
setup_empty_event(tty, ch);
@@ -469,17 +469,17 @@
spin_lock_irqsave(&epca_lock, flags);
tty->closing = 0;
ch->event = 0;
- ch->tty = NULL;
+ ch->port.tty = NULL;
spin_unlock_irqrestore(&epca_lock, flags);
- if (ch->blocked_open) {
+ if (ch->port.blocked_open) {
if (ch->close_delay)
msleep_interruptible(jiffies_to_msecs(ch->close_delay));
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
}
- ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
+ ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
ASYNC_CLOSING);
- wake_up_interruptible(&ch->close_wait);
+ wake_up_interruptible(&ch->port.close_wait);
}
}
@@ -489,7 +489,7 @@
struct tty_struct *tty;
struct board_chan __iomem *bc;
- if (!(ch->asyncflags & ASYNC_INITIALIZED))
+ if (!(ch->port.flags & ASYNC_INITIALIZED))
return;
spin_lock_irqsave(&epca_lock, flags);
@@ -504,7 +504,7 @@
*/
if (bc)
writeb(0, &bc->idata);
- tty = ch->tty;
+ tty = ch->port.tty;
/* If we're a modem control device and HUPCL is on, drop RTS & DTR. */
if (tty->termios->c_cflag & HUPCL) {
@@ -518,7 +518,7 @@
* will have to reinitialized. Set a flag to indicate this.
*/
/* Prevent future Digi programmed interrupts from coming active */
- ch->asyncflags &= ~ASYNC_INITIALIZED;
+ ch->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&epca_lock, flags);
}
@@ -538,12 +538,12 @@
shutdown(ch);
spin_lock_irqsave(&epca_lock, flags);
- ch->tty = NULL;
+ ch->port.tty = NULL;
ch->event = 0;
- ch->count = 0;
- ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED);
+ ch->port.count = 0;
+ ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED);
spin_unlock_irqrestore(&epca_lock, flags);
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
}
}
@@ -795,7 +795,7 @@
unsigned long flags;
if (tty_hung_up_p(filp)) {
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
+ if (ch->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -806,10 +806,10 @@
* If the device is in the middle of being closed, then block until
* it's done, and then try again.
*/
- if (ch->asyncflags & ASYNC_CLOSING) {
- interruptible_sleep_on(&ch->close_wait);
+ if (ch->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&ch->port.close_wait);
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
+ if (ch->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -820,7 +820,7 @@
* If non-blocking mode is set, then make the check up front
* and then exit.
*/
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+ ch->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
if (tty->termios->c_cflag & CLOCAL)
@@ -828,24 +828,24 @@
/* Block waiting for the carrier detect and the line to become free */
retval = 0;
- add_wait_queue(&ch->open_wait, &wait);
+ add_wait_queue(&ch->port.open_wait, &wait);
spin_lock_irqsave(&epca_lock, flags);
/* We dec count so that pc_close will know when to free things */
if (!tty_hung_up_p(filp))
- ch->count--;
- ch->blocked_open++;
+ ch->port.count--;
+ ch->port.blocked_open++;
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(ch->asyncflags & ASYNC_INITIALIZED)) {
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
+ !(ch->port.flags & ASYNC_INITIALIZED)) {
+ if (ch->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(ch->asyncflags & ASYNC_CLOSING) &&
+ if (!(ch->port.flags & ASYNC_CLOSING) &&
(do_clocal || (ch->imodem & ch->dcd)))
break;
if (signal_pending(current)) {
@@ -864,17 +864,17 @@
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&ch->open_wait, &wait);
+ remove_wait_queue(&ch->port.open_wait, &wait);
if (!tty_hung_up_p(filp))
- ch->count++;
- ch->blocked_open--;
+ ch->port.count++;
+ ch->port.blocked_open--;
spin_unlock_irqrestore(&epca_lock, flags);
if (retval)
return retval;
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+ ch->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -933,7 +933,7 @@
* necessary because we do not wish to flush and shutdown the channel
* until the last app holding the channel open, closes it.
*/
- ch->count++;
+ ch->port.count++;
/*
* Set a kernel structures pointer to our local channel structure. This
* way we can get to it when passed only a tty struct.
@@ -957,14 +957,14 @@
writew(head, &bc->rout);
/* Set the channels associated tty structure */
- ch->tty = tty;
+ ch->port.tty = tty;
/*
* The below routine generally sets up parity, baud, flow control
* issues, etc.... It effect both control flags and input flags.
*/
epcaparam(tty, ch);
- ch->asyncflags |= ASYNC_INITIALIZED;
+ ch->port.flags |= ASYNC_INITIALIZED;
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
@@ -976,7 +976,7 @@
* waiting for the line...
*/
spin_lock_irqsave(&epca_lock, flags);
- ch->tty = tty;
+ ch->port.tty = tty;
globalwinon(ch);
/* Enable Digi Data events */
writeb(1, &bc->idata);
@@ -1017,8 +1017,8 @@
}
ch = card_ptr[crd];
for (count = 0; count < bd->numports; count++, ch++) {
- if (ch && ch->tty)
- tty_hangup(ch->tty);
+ if (ch && ch->port.tty)
+ tty_hangup(ch->port.tty);
}
}
pci_unregister_driver(&epca_driver);
@@ -1427,7 +1427,7 @@
ch->boardnum = crd;
ch->channelnum = i;
ch->magic = EPCA_MAGIC;
- ch->tty = NULL;
+ ch->port.tty = NULL;
if (shrinkmem) {
fepcmd(ch, SETBUFFER, 32, 0, 0, 0);
@@ -1510,10 +1510,10 @@
ch->fepstopca = 0;
ch->close_delay = 50;
- ch->count = 0;
- ch->blocked_open = 0;
- init_waitqueue_head(&ch->open_wait);
- init_waitqueue_head(&ch->close_wait);
+ ch->port.count = 0;
+ ch->port.blocked_open = 0;
+ init_waitqueue_head(&ch->port.open_wait);
+ init_waitqueue_head(&ch->port.close_wait);
spin_unlock_irqrestore(&epca_lock, flags);
}
@@ -1633,15 +1633,15 @@
if (event & MODEMCHG_IND) {
/* A modem signal change has been indicated */
ch->imodem = mstat;
- if (ch->asyncflags & ASYNC_CHECK_CD) {
+ if (ch->port.flags & ASYNC_CHECK_CD) {
/* We are now receiving dcd */
if (mstat & ch->dcd)
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
else /* No dcd; hangup */
pc_sched_event(ch, EPCA_EVENT_HANGUP);
}
}
- tty = ch->tty;
+ tty = ch->port.tty;
if (tty) {
if (event & BREAK_IND) {
/* A break has been indicated */
@@ -1880,9 +1880,9 @@
* that the driver will wait on carrier detect.
*/
if (ts->c_cflag & CLOCAL)
- ch->asyncflags &= ~ASYNC_CHECK_CD;
+ ch->port.flags &= ~ASYNC_CHECK_CD;
else
- ch->asyncflags |= ASYNC_CHECK_CD;
+ ch->port.flags |= ASYNC_CHECK_CD;
mval = ch->m_dtr | ch->m_rts;
} /* End CBAUD not detected */
iflag = termios2digi_i(ch, ts->c_iflag);
@@ -1972,7 +1972,7 @@
globalwinon(ch);
if (ch->statusflags & RXSTOPPED)
return;
- tty = ch->tty;
+ tty = ch->port.tty;
if (tty)
ts = tty->termios;
bc = ch->brdchan;
@@ -2032,7 +2032,7 @@
globalwinon(ch);
writew(tail, &bc->rout);
/* Must be called with global data */
- tty_schedule_flip(ch->tty);
+ tty_schedule_flip(ch->port.tty);
}
static int info_ioctl(struct tty_struct *tty, struct file *file,
@@ -2262,8 +2262,8 @@
tty_wait_until_sent(tty, 0);
} else {
/* ldisc lock already held in ioctl */
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ if (tty->ldisc.ops->flush_buffer)
+ tty->ldisc.ops->flush_buffer(tty);
}
unlock_kernel();
/* Fall Thru */
@@ -2376,7 +2376,7 @@
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
} /* End if channel valid */
}
@@ -2386,13 +2386,13 @@
struct channel *ch = container_of(work, struct channel, tqueue);
/* Called in response to a modem change event */
if (ch && ch->magic == EPCA_MAGIC) {
- struct tty_struct *tty = ch->tty;
+ struct tty_struct *tty = ch->port.tty;
if (tty && tty->driver_data) {
if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
tty_hangup(tty);
- wake_up_interruptible(&ch->open_wait);
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
+ wake_up_interruptible(&ch->port.open_wait);
+ ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
}
}
}
diff --git a/drivers/char/epca.h b/drivers/char/epca.h
index 3c77c02..d414bf2 100644
--- a/drivers/char/epca.h
+++ b/drivers/char/epca.h
@@ -84,6 +84,7 @@
struct channel
{
long magic;
+ struct tty_port port;
unsigned char boardnum;
unsigned char channelnum;
unsigned char omodem; /* FEP output modem status */
@@ -117,10 +118,7 @@
unsigned short rxbufhead;
unsigned short rxbufsize;
int close_delay;
- int count;
- int blocked_open;
unsigned long event;
- int asyncflags;
uint dev;
unsigned long statusflags;
unsigned long c_iflag;
@@ -132,9 +130,6 @@
struct board_info *board;
struct board_chan __iomem *brdchan;
struct digi_struct digiext;
- struct tty_struct *tty;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
struct work_struct tqueue;
struct global_data __iomem *mailbox;
};
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 84840ba..2eaf09f 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -128,9 +128,9 @@
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, info->flags, \
+ tty->name, info->port.flags, \
serial_driver.refcount, \
- info->count, tty->count, s)
+ info->port.count, tty->count, s)
#else
#define DBG_CNT(s)
#endif
@@ -172,13 +172,13 @@
static inline unsigned int serial_in(struct esp_struct *info, int offset)
{
- return inb(info->port + offset);
+ return inb(info->io_port + offset);
}
static inline void serial_out(struct esp_struct *info, int offset,
unsigned char value)
{
- outb(value, info->port+offset);
+ outb(value, info->io_port+offset);
}
/*
@@ -273,7 +273,7 @@
static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
int i;
struct esp_pio_buffer *pio_buf;
struct esp_pio_buffer *err_buf;
@@ -295,7 +295,7 @@
for (i = 0; i < num_bytes - 1; i += 2) {
*((unsigned short *)(pio_buf->data + i)) =
- inw(info->port + UART_ESI_RX);
+ inw(info->io_port + UART_ESI_RX);
err_buf->data[i] = serial_in(info, UART_ESI_RWS);
err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask;
err_buf->data[i] &= status_mask;
@@ -308,7 +308,7 @@
}
/* make sure everything is still ok since interrupts were enabled */
- tty = info->tty;
+ tty = info->port.tty;
if (!tty) {
release_pio_buffer(pio_buf);
@@ -325,7 +325,7 @@
if (err_buf->data[i] & 0x04) {
flag = TTY_BREAK;
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (err_buf->data[i] & 0x02)
flag = TTY_FRAME;
@@ -370,7 +370,7 @@
static inline void receive_chars_dma_done(struct esp_struct *info,
int status)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
int num_bytes;
unsigned long flags;
@@ -396,7 +396,7 @@
if (status & 0x10) {
statflag = TTY_BREAK;
(info->icount.brk)++;
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & 0x08) {
statflag = TTY_FRAME;
@@ -451,7 +451,7 @@
for (i = 0; i < space_avail - 1; i += 2) {
outw(*((unsigned short *)(pio_buf->data + i)),
- info->port + UART_ESI_TX);
+ info->io_port + UART_ESI_TX);
}
if (space_avail & 0x0001)
@@ -470,8 +470,8 @@
}
if (info->xmit_cnt < WAKEUP_CHARS) {
- if (info->tty)
- tty_wakeup(info->tty);
+ if (info->port.tty)
+ tty_wakeup(info->port.tty);
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
@@ -507,8 +507,8 @@
info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1);
if (info->xmit_cnt < WAKEUP_CHARS) {
- if (info->tty)
- tty_wakeup(info->tty);
+ if (info->port.tty)
+ tty_wakeup(info->port.tty);
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
@@ -575,18 +575,18 @@
wake_up_interruptible(&info->delta_msr_wait);
}
- if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+ if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttys%d CD now %s...", info->line,
(status & UART_MSR_DCD) ? "on" : "off");
#endif
if (status & UART_MSR_DCD)
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
else {
#ifdef SERIAL_DEBUG_OPEN
printk("scheduling hangup...");
#endif
- tty_hangup(info->tty);
+ tty_hangup(info->port.tty);
}
}
}
@@ -609,7 +609,7 @@
spin_lock(&info->lock);
- if (!info->tty) {
+ if (!info->port.tty) {
spin_unlock(&info->lock);
return IRQ_NONE;
}
@@ -647,7 +647,7 @@
num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
num_bytes |= serial_in(info, UART_ESI_STAT2);
- num_bytes = tty_buffer_request_room(info->tty, num_bytes);
+ num_bytes = tty_buffer_request_room(info->port.tty, num_bytes);
if (num_bytes) {
if (dma_bytes ||
@@ -661,7 +661,7 @@
if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
(scratch & 0x02) && (info->IER & UART_IER_THRI)) {
- if ((info->xmit_cnt <= 0) || info->tty->stopped) {
+ if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
info->IER &= ~UART_IER_THRI;
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
serial_out(info, UART_ESI_CMD2, info->IER);
@@ -782,7 +782,7 @@
spin_lock_irqsave(&info->lock, flags);
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
goto out;
if (!info->xmit_buf) {
@@ -806,7 +806,7 @@
num_chars |= serial_in(info, UART_ESI_STAT2);
while (num_chars > 1) {
- inw(info->port + UART_ESI_RX);
+ inw(info->io_port + UART_ESI_RX);
num_chars -= 2;
}
@@ -834,9 +834,9 @@
if (retval) {
if (capable(CAP_SYS_ADMIN)) {
- if (info->tty)
+ if (info->port.tty)
set_bit(TTY_IO_ERROR,
- &info->tty->flags);
+ &info->port.tty->flags);
retval = 0;
}
goto out_unlocked;
@@ -874,30 +874,30 @@
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
serial_out(info, UART_ESI_CMD2, info->IER);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
spin_unlock_irqrestore(&info->lock, flags);
/*
* Set up the tty->alt_speed kludge
*/
- if (info->tty) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
+ if (info->port.tty) {
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->port.tty->alt_speed = 57600;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->port.tty->alt_speed = 115200;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->port.tty->alt_speed = 230400;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->port.tty->alt_speed = 460800;
}
/*
* set the speed of the serial port
*/
change_speed(info);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
return 0;
out:
@@ -914,7 +914,7 @@
{
unsigned long flags, f;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
#ifdef SERIAL_DEBUG_OPEN
@@ -951,7 +951,7 @@
while (current_port) {
if ((current_port != info) &&
- (current_port->flags & ASYNC_INITIALIZED))
+ (current_port->port.flags & ASYNC_INITIALIZED))
break;
current_port = current_port->next_port;
@@ -974,7 +974,7 @@
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
serial_out(info, UART_ESI_CMD2, 0x00);
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
info->MCR &= ~UART_MCR_OUT2;
@@ -982,10 +982,10 @@
serial_out(info, UART_ESI_CMD2, UART_MCR);
serial_out(info, UART_ESI_CMD2, info->MCR);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->lock, flags);
}
@@ -1002,10 +1002,10 @@
unsigned char flow1 = 0, flow2 = 0;
unsigned long flags;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
- port = info->port;
+ cflag = info->port.tty->termios->c_cflag;
+ port = info->io_port;
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -1029,9 +1029,9 @@
if (cflag & CMSPAR)
cval |= UART_LCR_SPAR;
#endif
- baud = tty_get_baud_rate(info->tty);
+ baud = tty_get_baud_rate(info->port.tty);
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
quot = info->custom_divisor;
else {
if (baud == 134) /* Special case since 134 is really 134.5 */
@@ -1046,49 +1046,49 @@
if (baud) {
/* Actual rate */
baud = BASE_BAUD/quot;
- tty_encode_baud_rate(info->tty, baud, baud);
+ tty_encode_baud_rate(info->port.tty, baud, baud);
}
info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);
/* CTS flow control flag and modem status interrupts */
/* info->IER &= ~UART_IER_MSI; */
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
/* info->IER |= UART_IER_MSI; */
flow1 = 0x04;
flow2 = 0x10;
} else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/*
* Set up parity check flag
*/
info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
#if 0
/* This should be safe, but for some broken bits of hardware... */
- if (I_IGNPAR(info->tty)) {
+ if (I_IGNPAR(info->port.tty)) {
info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
info->read_status_mask |= UART_LSR_PE | UART_LSR_FE;
}
#endif
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty)) {
+ if (I_IGNPAR(info->port.tty)) {
info->ignore_status_mask |= UART_LSR_OE | \
UART_LSR_PE | UART_LSR_FE;
info->read_status_mask |= UART_LSR_OE | \
@@ -1096,7 +1096,7 @@
}
}
- if (I_IXOFF(info->tty))
+ if (I_IXOFF(info->port.tty))
flow1 |= 0x81;
spin_lock_irqsave(&info->lock, flags);
@@ -1116,10 +1116,10 @@
serial_out(info, UART_ESI_CMD2, flow2);
/* set flow control characters (XON/XOFF only) */
- if (I_IXOFF(info->tty)) {
+ if (I_IXOFF(info->port.tty)) {
serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS);
- serial_out(info, UART_ESI_CMD2, START_CHAR(info->tty));
- serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->tty));
+ serial_out(info, UART_ESI_CMD2, START_CHAR(info->port.tty));
+ serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->port.tty));
serial_out(info, UART_ESI_CMD2, 0x10);
serial_out(info, UART_ESI_CMD2, 0x21);
switch (cflag & CSIZE) {
@@ -1355,9 +1355,9 @@
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
tmp.line = info->line;
- tmp.port = info->port;
+ tmp.port = info->io_port;
tmp.irq = info->irq;
- tmp.flags = info->flags;
+ tmp.flags = info->port.flags;
tmp.xmit_fifo_size = 1024;
tmp.baud_base = BASE_BAUD;
tmp.close_delay = info->close_delay;
@@ -1407,7 +1407,7 @@
if ((new_serial.type != PORT_16550A) ||
(new_serial.hub6) ||
- (info->port != new_serial.port) ||
+ (info->io_port != new_serial.port) ||
(new_serial.baud_base != BASE_BAUD) ||
(new_serial.irq > 15) ||
(new_serial.irq < 2) ||
@@ -1425,9 +1425,9 @@
if (change_irq ||
(new_serial.close_delay != info->close_delay) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
+ (info->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
info->custom_divisor = new_serial.custom_divisor;
} else {
@@ -1441,9 +1441,9 @@
if ((current_async->line >= info->line) &&
(current_async->line < (info->line + 8))) {
if (current_async == info) {
- if (current_async->count > 1)
+ if (current_async->port.count > 1)
return -EBUSY;
- } else if (current_async->count)
+ } else if (current_async->port.count)
return -EBUSY;
}
@@ -1456,7 +1456,7 @@
* At this point, we start making changes.....
*/
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
info->custom_divisor = new_serial.custom_divisor;
info->close_delay = new_serial.close_delay * HZ/100;
@@ -1487,18 +1487,18 @@
}
}
- if (info->flags & ASYNC_INITIALIZED) {
- if (((old_info.flags & ASYNC_SPD_MASK) !=
- (info->flags & ASYNC_SPD_MASK)) ||
+ if (info->port.flags & ASYNC_INITIALIZED) {
+ if (((old_info.port.flags & ASYNC_SPD_MASK) !=
+ (info->port.flags & ASYNC_SPD_MASK)) ||
(old_info.custom_divisor != info->custom_divisor)) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->port.tty->alt_speed = 57600;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->port.tty->alt_speed = 115200;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->port.tty->alt_speed = 230400;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->port.tty->alt_speed = 460800;
change_speed(info);
}
} else
@@ -1554,9 +1554,9 @@
while (current_async) {
if (current_async == info) {
- if (current_async->count > 1)
+ if (current_async->port.count > 1)
return -EBUSY;
- } else if (current_async->count)
+ } else if (current_async->port.count)
return -EBUSY;
current_async = current_async->next_port;
@@ -1578,7 +1578,7 @@
spin_unlock_irqrestore(&info->lock, flags);
} else {
/* DMA mode to PIO mode only */
- if (info->count > 1)
+ if (info->port.count > 1)
return -EBUSY;
shutdown(info);
@@ -1634,7 +1634,7 @@
spin_unlock_irqrestore(&info->lock, flags);
}
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
retval = startup(info);
return retval;
@@ -1917,9 +1917,9 @@
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "rs_close ttys%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
- if (tty->count == 1 && info->count != 1) {
+ if (tty->count == 1 && info->port.count != 1) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1927,19 +1927,19 @@
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count);
- info->count = 1;
+ printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
- if (--info->count < 0) {
+ if (--info->port.count < 0) {
printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
- info->line, info->count);
- info->count = 0;
+ info->line, info->port.count);
+ info->port.count = 0;
}
- if (info->count) {
+ if (info->port.count) {
DBG_CNT("before DEC-2");
goto out;
}
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
spin_unlock_irqrestore(&info->lock, flags);
/*
@@ -1958,7 +1958,7 @@
/* info->IER &= ~UART_IER_RLSI; */
info->IER &= ~UART_IER_RDI;
info->read_status_mask &= ~UART_LSR_DR;
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
spin_lock_irqsave(&info->lock, flags);
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
@@ -1981,15 +1981,15 @@
rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
- info->tty = NULL;
+ info->port.tty = NULL;
- if (info->blocked_open) {
+ if (info->port.blocked_open) {
if (info->close_delay)
msleep_interruptible(jiffies_to_msecs(info->close_delay));
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->port.close_wait);
return;
out:
@@ -2047,10 +2047,10 @@
rs_flush_buffer(tty);
shutdown(info);
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+ wake_up_interruptible(&info->port.open_wait);
}
/*
@@ -2071,11 +2071,11 @@
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ (info->port.flags & ASYNC_CLOSING)) {
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
+ if (info->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -2090,7 +2090,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2100,20 +2100,20 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp))
- info->count--;
- info->blocked_open++;
+ info->port.count--;
+ info->port.blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
unsigned int scratch;
@@ -2128,9 +2128,9 @@
}
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
+ !(info->port.flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
+ if (info->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -2144,7 +2144,7 @@
if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
do_clocal = 1;
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(info->port.flags & ASYNC_CLOSING) &&
(do_clocal))
break;
if (signal_pending(current)) {
@@ -2153,25 +2153,25 @@
}
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
spin_unlock_irqrestore(&info->lock, flags);
schedule();
spin_lock_irqsave(&info->lock, flags);
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
spin_unlock_irqrestore(&info->lock, flags);
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
if (retval)
return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2204,12 +2204,12 @@
}
#ifdef SERIAL_DEBUG_OPEN
- printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count);
+ printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->port.count);
#endif
spin_lock_irqsave(&info->lock, flags);
- info->count++;
+ info->port.count++;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
spin_unlock_irqrestore(&info->lock, flags);
@@ -2263,7 +2263,7 @@
int port_detected = 0;
unsigned long flags;
- if (!request_region(info->port, REGION_SIZE, "esp serial"))
+ if (!request_region(info->io_port, REGION_SIZE, "esp serial"))
return -EIO;
spin_lock_irqsave(&info->lock, flags);
@@ -2300,7 +2300,7 @@
}
}
if (!port_detected)
- release_region(info->port, REGION_SIZE);
+ release_region(info->io_port, REGION_SIZE);
spin_unlock_irqrestore(&info->lock, flags);
return (port_detected);
@@ -2414,7 +2414,7 @@
offset = 0;
do {
- info->port = esp[i] + offset;
+ info->io_port = esp[i] + offset;
info->irq = irq[i];
info->line = (i * 8) + (offset / 8);
@@ -2425,9 +2425,9 @@
}
info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf;
- info->flags = STD_COM_FLAGS;
+ info->port.flags = STD_COM_FLAGS;
if (info->custom_divisor)
- info->flags |= ASYNC_SPD_CUST;
+ info->port.flags |= ASYNC_SPD_CUST;
info->magic = ESP_MAGIC;
info->close_delay = 5*HZ/10;
info->closing_wait = 30*HZ;
@@ -2436,13 +2436,13 @@
info->config.flow_off = flow_off;
info->config.pio_threshold = pio_threshold;
info->next_port = ports;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->port.open_wait);
+ init_waitqueue_head(&info->port.close_wait);
init_waitqueue_head(&info->delta_msr_wait);
init_waitqueue_head(&info->break_wait);
ports = info;
printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
- info->line, info->port, info->irq);
+ info->line, info->io_port, info->irq);
if (info->line % 8) {
printk("secondary port\n");
@@ -2498,8 +2498,8 @@
put_tty_driver(esp_driver);
while (ports) {
- if (ports->port)
- release_region(ports->port, REGION_SIZE);
+ if (ports->io_port)
+ release_region(ports->io_port, REGION_SIZE);
temp_async = ports->next_port;
kfree(ports);
ports = temp_async;
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index 252f73e..19d3afb 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -60,7 +60,7 @@
if (!port) return 0;
- if (! (port->flags & ASYNC_INITIALIZED)) return 0;
+ if (! (port->port.flags & ASYNC_INITIALIZED)) return 0;
/* Take a lock on the serial tranmit buffer! */
mutex_lock(& port->port_write_mutex);
@@ -103,7 +103,7 @@
if (!port) return 0;
- if (! (port->flags & ASYNC_INITIALIZED))
+ if (! (port->port.flags & ASYNC_INITIALIZED))
return 0;
/* get exclusive "write" access to this port (problem 3) */
@@ -141,13 +141,13 @@
mutex_unlock(& port->port_write_mutex);
gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n",
- (port->flags & GS_TX_INTEN)?"enabled": "disabled");
+ (port->port.flags & GS_TX_INTEN)?"enabled": "disabled");
if (port->xmit_cnt &&
!tty->stopped &&
!tty->hw_stopped &&
- !(port->flags & GS_TX_INTEN)) {
- port->flags |= GS_TX_INTEN;
+ !(port->port.flags & GS_TX_INTEN)) {
+ port->port.flags |= GS_TX_INTEN;
port->rd->enable_tx_interrupts (port);
}
func_exit ();
@@ -208,7 +208,7 @@
gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port);
if (port) {
gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n",
- port->xmit_cnt, port->xmit_buf, port->tty);
+ port->xmit_cnt, port->xmit_buf, port->port.tty);
}
if (!port || port->xmit_cnt < 0 || !port->xmit_buf) {
@@ -217,7 +217,7 @@
return -EINVAL; /* This is an error which we don't know how to handle. */
}
- rcib = gs_real_chars_in_buffer(port->tty);
+ rcib = gs_real_chars_in_buffer(port->port.tty);
if(rcib <= 0) {
gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n");
@@ -236,7 +236,7 @@
/* the expression is actually jiffies < end_jiffies, but that won't
work around the wraparound. Tricky eh? */
- while ((charsleft = gs_real_chars_in_buffer (port->tty)) &&
+ while ((charsleft = gs_real_chars_in_buffer (port->port.tty)) &&
time_after (end_jiffies, jiffies)) {
/* Units check:
chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies!
@@ -309,7 +309,7 @@
}
/* Beats me -- REW */
- port->flags |= GS_TX_INTEN;
+ port->port.flags |= GS_TX_INTEN;
port->rd->enable_tx_interrupts (port);
func_exit ();
}
@@ -329,8 +329,8 @@
if (port->xmit_cnt &&
port->xmit_buf &&
- (port->flags & GS_TX_INTEN) ) {
- port->flags &= ~GS_TX_INTEN;
+ (port->port.flags & GS_TX_INTEN) ) {
+ port->port.flags &= ~GS_TX_INTEN;
port->rd->disable_tx_interrupts (port);
}
func_exit ();
@@ -349,8 +349,8 @@
if (port->xmit_cnt &&
port->xmit_buf &&
- !(port->flags & GS_TX_INTEN) ) {
- port->flags |= GS_TX_INTEN;
+ !(port->port.flags & GS_TX_INTEN) ) {
+ port->port.flags |= GS_TX_INTEN;
port->rd->enable_tx_interrupts (port);
}
func_exit ();
@@ -365,7 +365,7 @@
if (!port) return;
- if (!(port->flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED))
return;
spin_lock_irqsave(&port->driver_lock, flags);
@@ -375,12 +375,12 @@
port->xmit_buf = NULL;
}
- if (port->tty)
- set_bit(TTY_IO_ERROR, &port->tty->flags);
+ if (port->port.tty)
+ set_bit(TTY_IO_ERROR, &port->port.tty->flags);
port->rd->shutdown_port (port);
- port->flags &= ~ASYNC_INITIALIZED;
+ port->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&port->driver_lock, flags);
func_exit();
@@ -396,16 +396,16 @@
if (!tty) return;
port = tty->driver_data;
- tty = port->tty;
+ tty = port->port.tty;
if (!tty)
return;
gs_shutdown_port (port);
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE);
- port->tty = NULL;
- port->count = 0;
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE);
+ port->port.tty = NULL;
+ port->port.count = 0;
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
func_exit ();
}
@@ -424,7 +424,7 @@
if (!port) return 0;
- tty = port->tty;
+ tty = port->port.tty;
if (!tty) return 0;
@@ -433,9 +433,9 @@
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -449,7 +449,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -461,34 +461,34 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
+ * this loop, port->port.count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n");
spin_lock_irqsave(&port->driver_lock, flags);
if (!tty_hung_up_p(filp)) {
- port->count--;
+ port->port.count--;
}
spin_unlock_irqrestore(&port->driver_lock, flags);
- port->blocked_open++;
+ port->port.blocked_open++;
while (1) {
CD = port->rd->get_CD (port);
gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD);
set_current_state (TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || CD))
break;
gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n",
@@ -500,17 +500,17 @@
schedule();
}
gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n",
- port->blocked_open);
+ port->port.blocked_open);
set_current_state (TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
if (!tty_hung_up_p(filp)) {
- port->count++;
+ port->port.count++;
}
- port->blocked_open--;
+ port->port.blocked_open--;
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
func_exit ();
return 0;
}
@@ -529,10 +529,10 @@
if (!port) return;
- if (!port->tty) {
+ if (!port->port.tty) {
/* This seems to happen when this is called from vhangup. */
- gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->tty is NULL\n");
- port->tty = tty;
+ gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->port.tty is NULL\n");
+ port->port.tty = tty;
}
spin_lock_irqsave(&port->driver_lock, flags);
@@ -545,23 +545,23 @@
return;
}
- if ((tty->count == 1) && (port->count != 1)) {
+ if ((tty->count == 1) && (port->port.count != 1)) {
printk(KERN_ERR "gs: gs_close port %p: bad port count;"
- " tty->count is 1, port count is %d\n", port, port->count);
- port->count = 1;
+ " tty->count is 1, port count is %d\n", port, port->port.count);
+ port->port.count = 1;
}
- if (--port->count < 0) {
- printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->count);
- port->count = 0;
+ if (--port->port.count < 0) {
+ printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->port.count);
+ port->port.count = 0;
}
- if (port->count) {
- gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->count);
+ if (port->port.count) {
+ gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count);
spin_unlock_irqrestore(&port->driver_lock, flags);
func_exit ();
return;
}
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
@@ -585,7 +585,7 @@
if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
gs_wait_tx_flushed (port, port->closing_wait);
- port->flags &= ~GS_ACTIVE;
+ port->port.flags &= ~GS_ACTIVE;
gs_flush_buffer(tty);
@@ -595,18 +595,18 @@
port->event = 0;
port->rd->close (port);
port->rd->shutdown_port (port);
- port->tty = NULL;
+ port->port.tty = NULL;
- if (port->blocked_open) {
+ if (port->port.blocked_open) {
if (port->close_delay) {
spin_unlock_irqrestore(&port->driver_lock, flags);
msleep_interruptible(jiffies_to_msecs(port->close_delay));
spin_lock_irqsave(&port->driver_lock, flags);
}
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED);
+ wake_up_interruptible(&port->port.close_wait);
func_exit ();
}
@@ -626,10 +626,10 @@
port = tty->driver_data;
if (!port) return;
- if (!port->tty) {
+ if (!port->port.tty) {
/* This seems to happen when this is called after gs_close. */
- gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->tty is NULL\n");
- port->tty = tty;
+ gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->port.tty is NULL\n");
+ port->port.tty = tty;
}
@@ -651,15 +651,15 @@
baudrate = tty_get_baud_rate(tty);
if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ( (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ( (port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baudrate = 57600;
- else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baudrate = 115200;
- else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baudrate = 230400;
- else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
baudrate = 460800;
- else if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
baudrate = (port->baud_base / port->custom_divisor);
}
@@ -715,7 +715,7 @@
func_enter ();
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
func_exit ();
return 0;
}
@@ -737,15 +737,15 @@
}
spin_lock_irqsave (&port->driver_lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ if (port->port.tty)
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
mutex_init(&port->port_write_mutex);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
spin_unlock_irqrestore(&port->driver_lock, flags);
- gs_set_termios(port->tty, NULL);
+ gs_set_termios(port->port.tty, NULL);
spin_lock_irqsave (&port->driver_lock, flags);
- port->flags |= ASYNC_INITIALIZED;
- port->flags &= ~GS_TX_INTEN;
+ port->port.flags |= ASYNC_INITIALIZED;
+ port->port.flags &= ~GS_TX_INTEN;
spin_unlock_irqrestore(&port->driver_lock, flags);
func_exit ();
@@ -764,11 +764,11 @@
if ((sio.baud_base != port->baud_base) ||
(sio.close_delay != port->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->port.flags & ~ASYNC_USR_MASK)))
return(-EPERM);
}
- port->flags = (port->flags & ~ASYNC_USR_MASK) |
+ port->port.flags = (port->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
port->baud_base = sio.baud_base;
@@ -776,7 +776,7 @@
port->closing_wait = sio.closing_wait;
port->custom_divisor = sio.custom_divisor;
- gs_set_termios (port->tty, NULL);
+ gs_set_termios (port->port.tty, NULL);
return 0;
}
@@ -793,7 +793,7 @@
struct serial_struct sio;
memset(&sio, 0, sizeof(struct serial_struct));
- sio.flags = port->flags;
+ sio.flags = port->port.flags;
sio.baud_base = port->baud_base;
sio.close_delay = port->close_delay;
sio.closing_wait = port->closing_wait;
@@ -821,10 +821,10 @@
{
func_enter ();
- tty_insert_flip_char(port->tty, 0, TTY_BREAK);
- tty_schedule_flip(port->tty);
- if (port->flags & ASYNC_SAK) {
- do_SAK (port->tty);
+ tty_insert_flip_char(port->port.tty, 0, TTY_BREAK);
+ tty_schedule_flip(port->port.tty);
+ if (port->port.flags & ASYNC_SAK) {
+ do_SAK (port->port.tty);
}
func_exit ();
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 938879c..0061e18 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -868,11 +868,11 @@
amountToMove = count;
}
// Move the first block
- pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
+ pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
&(pCh->Ibuf[stripIndex]), NULL, amountToMove );
// If we needed to wrap, do the second data move
if (count > amountToMove) {
- pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
+ pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
pCh->Ibuf, NULL, count - amountToMove );
}
// Bump and wrap the stripIndex all at once by the amount of data read. This
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 9a2394c..5dc7440 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1289,11 +1289,12 @@
// code duplicated from n_tty (ldisc)
static inline void isig(int sig, struct tty_struct *tty, int flush)
{
+ /* FIXME: This is completely bogus */
if (tty->pgrp)
kill_pgrp(tty->pgrp, sig, 1);
if (flush || !L_NOFLSH(tty)) {
- if ( tty->ldisc.flush_buffer )
- tty->ldisc.flush_buffer(tty);
+ if ( tty->ldisc.ops->flush_buffer )
+ tty->ldisc.ops->flush_buffer(tty);
i2InputFlush( tty->driver_data );
}
}
@@ -1342,7 +1343,7 @@
}
tmp = pCh->pTTY->real_raw;
pCh->pTTY->real_raw = 0;
- pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
+ pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
pCh->pTTY->real_raw = tmp;
}
#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4f3cefa..d4281df 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -198,17 +198,10 @@
struct isi_port {
unsigned short magic;
- unsigned int flags;
- int count;
- int blocked_open;
- int close_delay;
+ struct tty_port port;
u16 channel;
u16 status;
- u16 closing_wait;
struct isi_board *card;
- struct tty_struct *tty;
- wait_queue_head_t close_wait;
- wait_queue_head_t open_wait;
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
@@ -430,11 +423,11 @@
for (; count > 0; count--, port++) {
/* port not active or tx disabled to force flow control */
- if (!(port->flags & ASYNC_INITIALIZED) ||
+ if (!(port->port.flags & ASYNC_INITIALIZED) ||
!(port->status & ISI_TXOK))
continue;
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL)
continue;
@@ -458,7 +451,7 @@
if (residue == YES) {
residue = NO;
if (cnt > 0) {
- wrd |= (port->xmit_buf[port->xmit_tail]
+ wrd |= (port->port.xmit_buf[port->xmit_tail]
<< 8);
port->xmit_tail = (port->xmit_tail + 1)
& (SERIAL_XMIT_SIZE - 1);
@@ -474,14 +467,14 @@
if (cnt <= 0)
break;
word_count = cnt >> 1;
- outsw(base, port->xmit_buf+port->xmit_tail, word_count);
+ outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
port->xmit_tail = (port->xmit_tail
+ (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
txcount -= (word_count << 1);
port->xmit_cnt -= (word_count << 1);
if (cnt & 0x0001) {
residue = YES;
- wrd = port->xmit_buf[port->xmit_tail];
+ wrd = port->port.xmit_buf[port->xmit_tail];
port->xmit_tail = (port->xmit_tail + 1)
& (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
@@ -548,13 +541,13 @@
return IRQ_HANDLED;
}
port = card->ports + channel;
- if (!(port->flags & ASYNC_INITIALIZED)) {
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL) {
word_count = byte_count >> 1;
while (byte_count > 1) {
@@ -572,7 +565,7 @@
header = inw(base);
switch (header & 0xff) {
case 0: /* Change in EIA signals */
- if (port->flags & ASYNC_CHECK_CD) {
+ if (port->port.flags & ASYNC_CHECK_CD) {
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
@@ -585,7 +578,7 @@
/* Carrier has been detected */
pr_dbg("interrupt: DCD->high.\n");
port->status |= ISI_DCD;
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
} else {
if (header & ISI_DCD)
@@ -594,17 +587,17 @@
port->status &= ~ISI_DCD;
}
- if (port->flags & ASYNC_CTS_FLOW) {
- if (port->tty->hw_stopped) {
+ if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (port->port.tty->hw_stopped) {
if (header & ISI_CTS) {
- port->tty->hw_stopped = 0;
+ port->port.tty->hw_stopped = 0;
/* start tx ing */
port->status |= (ISI_TXOK
| ISI_CTS);
tty_wakeup(tty);
}
} else if (!(header & ISI_CTS)) {
- port->tty->hw_stopped = 1;
+ port->port.tty->hw_stopped = 1;
/* stop tx ing */
port->status &= ~(ISI_TXOK | ISI_CTS);
}
@@ -629,7 +622,7 @@
case 1: /* Received Break !!! */
tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
tty_flip_buffer_push(tty);
break;
@@ -681,7 +674,7 @@
shift_count = card->shift_count;
unsigned char flow_ctrl;
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL)
return;
@@ -697,7 +690,7 @@
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- port->tty->termios->c_cflag &= ~CBAUDEX;
+ port->port.tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
}
@@ -708,13 +701,13 @@
* the 'setserial' utility.
*/
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baud++; /* 57.6 Kbps */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baud += 2; /* 115 Kbps */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baud += 3; /* 230 kbps*/
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
baud += 4; /* 460 kbps*/
}
if (linuxb_to_isib[baud] == -1) {
@@ -754,15 +747,15 @@
InterruptTheCard(base);
}
if (C_CLOCAL(tty))
- port->flags &= ~ASYNC_CHECK_CD;
+ port->port.flags &= ~ASYNC_CHECK_CD;
else
- port->flags |= ASYNC_CHECK_CD;
+ port->port.flags |= ASYNC_CHECK_CD;
/* flow control settings ...*/
flow_ctrl = 0;
- port->flags &= ~ASYNC_CTS_FLOW;
+ port->port.flags &= ~ASYNC_CTS_FLOW;
if (C_CRTSCTS(tty)) {
- port->flags |= ASYNC_CTS_FLOW;
+ port->port.flags |= ASYNC_CTS_FLOW;
flow_ctrl |= ISICOM_CTSRTS;
}
if (I_IXON(tty))
@@ -809,23 +802,15 @@
struct isi_board *card = port->card;
unsigned long flags;
- if (port->flags & ASYNC_INITIALIZED)
+ if (port->port.flags & ASYNC_INITIALIZED)
return 0;
- if (!port->xmit_buf) {
- /* Relies on BKL */
- unsigned long page = get_zeroed_page(GFP_KERNEL);
- if (page == 0)
- return -ENOMEM;
- if (port->xmit_buf)
- free_page(page);
- else
- port->xmit_buf = (unsigned char *) page;
- }
+ if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
- if (port->count == 1)
+ if (port->port.tty)
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ if (port->port.count == 1)
card->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -839,7 +824,7 @@
}
isicom_config_port(port);
- port->flags |= ASYNC_INITIALIZED;
+ port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
@@ -855,10 +840,10 @@
/* block if port is in the process of being closed */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
pr_dbg("block_til_ready: close in progress.\n");
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -869,7 +854,7 @@
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
pr_dbg("block_til_ready: non-block mode.\n");
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -879,26 +864,26 @@
/* block waiting for DCD to be asserted, and while
callout dev is busy */
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
+ port->port.count--;
+ port->port.blocked_open++;
spin_unlock_irqrestore(&card->card_lock, flags);
while (1) {
raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || (port->status & ISI_DCD))) {
break;
}
@@ -909,15 +894,15 @@
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
+ port->port.count++;
+ port->port.blocked_open--;
spin_unlock_irqrestore(&card->card_lock, flags);
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -947,9 +932,9 @@
isicom_setup_board(card);
- port->count++;
+ port->port.count++;
tty->driver_data = port;
- port->tty = tty;
+ port->port.tty = tty;
error = isicom_setup_port(port);
if (error == 0)
error = block_til_ready(tty, filp, port);
@@ -970,18 +955,15 @@
struct isi_board *card = port->card;
struct tty_struct *tty;
- tty = port->tty;
+ tty = port->port.tty;
- if (!(port->flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED))
return;
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
- port->flags &= ~ASYNC_INITIALIZED;
+ tty_port_free_xmit_buf(&port->port);
+ port->port.flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
- port->tty = NULL;
+ port->port.tty = NULL;
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
@@ -1046,33 +1028,33 @@
return;
}
- if (tty->count == 1 && port->count != 1) {
+ if (tty->count == 1 && port->port.count != 1) {
printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
"count tty->count = 1 port count = %d.\n",
- card->base, port->count);
- port->count = 1;
+ card->base, port->port.count);
+ port->port.count = 1;
}
- if (--port->count < 0) {
+ if (--port->port.count < 0) {
printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
"count for channel%d = %d", card->base, port->channel,
- port->count);
- port->count = 0;
+ port->port.count);
+ port->port.count = 0;
}
- if (port->count) {
+ if (port->port.count) {
spin_unlock_irqrestore(&card->card_lock, flags);
return;
}
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
tty->closing = 1;
spin_unlock_irqrestore(&card->card_lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
+ if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, port->port.closing_wait);
/* indicate to the card that no more data can be received
on this port */
spin_lock_irqsave(&card->card_lock, flags);
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
card->port_status &= ~(1 << port->channel);
outw(card->port_status, card->base + 0x02);
}
@@ -1085,18 +1067,18 @@
spin_lock_irqsave(&card->card_lock, flags);
tty->closing = 0;
- if (port->blocked_open) {
+ if (port->port.blocked_open) {
spin_unlock_irqrestore(&card->card_lock, flags);
- if (port->close_delay) {
+ if (port->port.close_delay) {
pr_dbg("scheduling until time out.\n");
msleep_interruptible(
- jiffies_to_msecs(port->close_delay));
+ jiffies_to_msecs(port->port.close_delay));
}
spin_lock_irqsave(&card->card_lock, flags);
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&port->port.close_wait);
spin_unlock_irqrestore(&card->card_lock, flags);
}
@@ -1112,9 +1094,6 @@
if (isicom_paranoia_check(port, tty->name, "isicom_write"))
return 0;
- if (!port->xmit_buf)
- return 0;
-
spin_lock_irqsave(&card->card_lock, flags);
while (1) {
@@ -1123,7 +1102,7 @@
if (cnt <= 0)
break;
- memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
+ memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
- 1);
port->xmit_cnt += cnt;
@@ -1147,16 +1126,13 @@
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
return 0;
- if (!port->xmit_buf)
- return 0;
-
spin_lock_irqsave(&card->card_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
}
- port->xmit_buf[port->xmit_head++] = ch;
+ port->port.xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt++;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -1172,7 +1148,7 @@
return;
if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf)
+ !port->port.xmit_buf)
return;
/* this tells the transmitter to consider this port for
@@ -1274,23 +1250,23 @@
lock_kernel();
- reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
+ reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
if (!capable(CAP_SYS_ADMIN)) {
- if ((newinfo.close_delay != port->close_delay) ||
- (newinfo.closing_wait != port->closing_wait) ||
+ if ((newinfo.close_delay != port->port.close_delay) ||
+ (newinfo.closing_wait != port->port.closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK))) {
+ (port->port.flags & ~ASYNC_USR_MASK))) {
unlock_kernel();
return -EPERM;
}
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+ port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(newinfo.flags & ASYNC_USR_MASK));
} else {
- port->close_delay = newinfo.close_delay;
- port->closing_wait = newinfo.closing_wait;
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ port->port.close_delay = newinfo.close_delay;
+ port->port.closing_wait = newinfo.closing_wait;
+ port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
(newinfo.flags & ASYNC_FLAGS));
}
if (reconfig_port) {
@@ -1314,10 +1290,10 @@
out_info.line = port - isi_ports;
out_info.port = port->card->base;
out_info.irq = port->card->irq;
- out_info.flags = port->flags;
+ out_info.flags = port->port.flags;
/* out_info.baud_base = ? */
- out_info.close_delay = port->close_delay;
- out_info.closing_wait = port->closing_wait;
+ out_info.close_delay = port->port.close_delay;
+ out_info.closing_wait = port->port.closing_wait;
unlock_kernel();
if (copy_to_user(info, &out_info, sizeof(out_info)))
return -EFAULT;
@@ -1454,10 +1430,10 @@
isicom_shutdown_port(port);
spin_unlock_irqrestore(&port->card->card_lock, flags);
- port->count = 0;
- port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = NULL;
- wake_up_interruptible(&port->open_wait);
+ port->port.count = 0;
+ port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->port.tty = NULL;
+ wake_up_interruptible(&port->port.open_wait);
}
@@ -1736,6 +1712,12 @@
if (card_count >= BOARD_COUNT)
goto err;
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ dev_err(&pdev->dev, "failed to enable\n");
+ goto err;
+ }
+
dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
/* allot the first empty slot in the array */
@@ -1790,6 +1772,7 @@
errdec:
board->base = 0;
card_count--;
+ pci_disable_device(pdev);
err:
return retval;
}
@@ -1806,6 +1789,7 @@
pci_release_region(pdev, 3);
board->base = 0;
card_count--;
+ pci_disable_device(pdev);
}
static int __init isicom_init(void)
@@ -1818,14 +1802,13 @@
isi_card[idx].ports = port;
spin_lock_init(&isi_card[idx].card_lock);
for (channel = 0; channel < 16; channel++, port++) {
+ tty_port_init(&port->port);
port->magic = ISICOM_MAGIC;
port->card = &isi_card[idx];
port->channel = channel;
- port->close_delay = 50 * HZ/100;
- port->closing_wait = 3000 * HZ/100;
+ port->port.close_delay = 50 * HZ/100;
+ port->port.closing_wait = 3000 * HZ/100;
port->status = 0;
- init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
/* . . . */
}
isi_card[idx].base = 0;
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 7c8b62f..6ef1c56 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -735,8 +735,8 @@
for (j = 0; j < STL_MAXPORTS; j++) {
portp = brdp->ports[j];
if (portp != NULL) {
- if (portp->tty != NULL)
- tty_hangup(portp->tty);
+ if (portp->port.tty != NULL)
+ tty_hangup(portp->port.tty);
kfree(portp);
}
}
@@ -811,9 +811,9 @@
* The sleep here does not need interrupt protection since the wakeup
* for it is done with the same context.
*/
- if (portp->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->close_wait);
- if (portp->flags & ASYNC_HUP_NOTIFY)
+ if (portp->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&portp->port.close_wait);
+ if (portp->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
return -ERESTARTSYS;
}
@@ -824,7 +824,7 @@
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
*/
- portp->tty = tty;
+ portp->port.tty = tty;
tty->driver_data = portp;
portp->refcount++;
@@ -833,10 +833,10 @@
if (signal_pending(current))
return -ERESTARTSYS;
- if ((portp->flags & ASYNC_INITIALIZED) == 0) {
+ if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
if ((rc = stli_initopen(brdp, portp)) >= 0) {
- portp->flags |= ASYNC_INITIALIZED;
+ portp->port.flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
clear_bit(ST_INITIALIZING, &portp->state);
@@ -851,9 +851,9 @@
* The sleep here does not need interrupt protection since the wakeup
* for it is done with the same context.
*/
- if (portp->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->close_wait);
- if (portp->flags & ASYNC_HUP_NOTIFY)
+ if (portp->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&portp->port.close_wait);
+ if (portp->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
return -ERESTARTSYS;
}
@@ -867,7 +867,7 @@
if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0)
return rc;
}
- portp->flags |= ASYNC_NORMAL_ACTIVE;
+ portp->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -895,7 +895,7 @@
return;
}
- portp->flags |= ASYNC_CLOSING;
+ portp->port.flags |= ASYNC_CLOSING;
/*
* May want to wait for data to drain before closing. The BUSY flag
@@ -911,7 +911,7 @@
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
- portp->flags &= ~ASYNC_INITIALIZED;
+ portp->port.flags &= ~ASYNC_INITIALIZED;
brdp = stli_brds[portp->brdnr];
stli_rawclose(brdp, portp, 0, 0);
if (tty->termios->c_cflag & HUPCL) {
@@ -931,16 +931,16 @@
stli_flushbuffer(tty);
tty->closing = 0;
- portp->tty = NULL;
+ portp->port.tty = NULL;
if (portp->openwaitcnt) {
if (portp->close_delay)
msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
}
- portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&portp->close_wait);
+ portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&portp->port.close_wait);
}
/*****************************************************************************/
@@ -970,7 +970,7 @@
sizeof(asynotify_t), 0)) < 0)
return rc;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return -ENODEV;
stli_mkasyport(portp, &aport, tty->termios);
@@ -1169,7 +1169,7 @@
if (portp == NULL)
return -ENODEV;
- if (portp->tty == NULL)
+ if (portp->port.tty == NULL)
return -ENODEV;
if (portp->brdnr >= stli_nrbrds)
return -ENODEV;
@@ -1177,7 +1177,7 @@
if (brdp == NULL)
return -ENODEV;
- stli_mkasyport(portp, &aport, portp->tty->termios);
+ stli_mkasyport(portp, &aport, portp->port.tty->termios);
return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
}
@@ -1196,7 +1196,7 @@
rc = 0;
doclocal = 0;
- if (portp->tty->termios->c_cflag & CLOCAL)
+ if (portp->port.tty->termios->c_cflag & CLOCAL)
doclocal++;
spin_lock_irqsave(&stli_lock, flags);
@@ -1211,14 +1211,14 @@
&portp->asig, sizeof(asysigs_t), 0)) < 0)
break;
if (tty_hung_up_p(filp) ||
- ((portp->flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->flags & ASYNC_HUP_NOTIFY)
+ ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
+ if (portp->port.flags & ASYNC_HUP_NOTIFY)
rc = -EBUSY;
else
rc = -ERESTARTSYS;
break;
}
- if (((portp->flags & ASYNC_CLOSING) == 0) &&
+ if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
(doclocal || (portp->sigs & TIOCM_CD))) {
break;
}
@@ -1226,7 +1226,7 @@
rc = -ERESTARTSYS;
break;
}
- interruptible_sleep_on(&portp->open_wait);
+ interruptible_sleep_on(&portp->port.open_wait);
}
spin_lock_irqsave(&stli_lock, flags);
@@ -1548,7 +1548,7 @@
sio.type = PORT_UNKNOWN;
sio.line = portp->portnr;
sio.irq = 0;
- sio.flags = portp->flags;
+ sio.flags = portp->port.flags;
sio.baud_base = portp->baud_base;
sio.close_delay = portp->close_delay;
sio.closing_wait = portp->closing_wait;
@@ -1583,11 +1583,11 @@
if ((sio.baud_base != portp->baud_base) ||
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->flags & ~ASYNC_USR_MASK)))
+ (portp->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
}
- portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
+ portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
portp->baud_base = sio.baud_base;
portp->close_delay = sio.close_delay;
@@ -1751,7 +1751,7 @@
if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0))
tty->hw_stopped = 0;
if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
}
/*****************************************************************************/
@@ -1834,7 +1834,7 @@
if (brdp == NULL)
return;
- portp->flags &= ~ASYNC_INITIALIZED;
+ portp->port.flags &= ~ASYNC_INITIALIZED;
if (!test_bit(ST_CLOSING, &portp->state))
stli_rawclose(brdp, portp, 0, 0);
@@ -1855,12 +1855,12 @@
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- portp->tty = NULL;
- portp->flags &= ~ASYNC_NORMAL_ACTIVE;
+ portp->port.tty = NULL;
+ portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->refcount = 0;
spin_unlock_irqrestore(&stli_lock, flags);
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
}
/*****************************************************************************/
@@ -2188,7 +2188,7 @@
if (test_bit(ST_RXSTOP, &portp->state))
return;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return;
@@ -2362,7 +2362,7 @@
if (ap->notify) {
nt = ap->changed;
ap->notify = 0;
- tty = portp->tty;
+ tty = portp->port.tty;
if (nt.signal & SG_DCD) {
oldsigs = portp->sigs;
@@ -2370,10 +2370,10 @@
clear_bit(ST_GETSIGS, &portp->state);
if ((portp->sigs & TIOCM_CD) &&
((oldsigs & TIOCM_CD) == 0))
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
if ((oldsigs & TIOCM_CD) &&
((portp->sigs & TIOCM_CD) == 0)) {
- if (portp->flags & ASYNC_CHECK_CD) {
+ if (portp->port.flags & ASYNC_CHECK_CD) {
if (tty)
tty_hangup(tty);
}
@@ -2392,7 +2392,7 @@
if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
if (tty != NULL) {
tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (portp->flags & ASYNC_SAK) {
+ if (portp->port.flags & ASYNC_SAK) {
do_SAK(tty);
EBRDENABLE(brdp);
}
@@ -2542,17 +2542,17 @@
/*
* Start of by setting the baud, char size, parity and stop bit info.
*/
- pp->baudout = tty_get_baud_rate(portp->tty);
+ pp->baudout = tty_get_baud_rate(portp->port.tty);
if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
pp->baudout = 57600;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
pp->baudout = 115200;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
pp->baudout = 230400;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
pp->baudout = 460800;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
pp->baudout = (portp->baud_base / portp->custom_divisor);
}
if (pp->baudout > STL_MAXBAUD)
@@ -2625,9 +2625,9 @@
* Set up clocal processing as required.
*/
if (tiosp->c_cflag & CLOCAL)
- portp->flags &= ~ASYNC_CHECK_CD;
+ portp->port.flags &= ~ASYNC_CHECK_CD;
else
- portp->flags |= ASYNC_CHECK_CD;
+ portp->port.flags |= ASYNC_CHECK_CD;
/*
* Transfer any persistent flags into the asyport structure.
@@ -2703,8 +2703,8 @@
portp->baud_base = STL_BAUDBASE;
portp->close_delay = STL_CLOSEDELAY;
portp->closing_wait = 30 * HZ;
- init_waitqueue_head(&portp->open_wait);
- init_waitqueue_head(&portp->close_wait);
+ init_waitqueue_head(&portp->port.open_wait);
+ init_waitqueue_head(&portp->port.close_wait);
init_waitqueue_head(&portp->raw_wait);
panelport++;
if (panelport >= brdp->panels[panelnr]) {
@@ -4246,18 +4246,18 @@
stli_comstats.panel = portp->panelnr;
stli_comstats.port = portp->portnr;
stli_comstats.state = portp->state;
- stli_comstats.flags = portp->flags;
+ stli_comstats.flags = portp->port.flag;
spin_lock_irqsave(&brd_lock, flags);
- if (portp->tty != NULL) {
- if (portp->tty->driver_data == portp) {
- stli_comstats.ttystate = portp->tty->flags;
+ if (portp->port.tty != NULL) {
+ if (portp->port.tty->driver_data == portp) {
+ stli_comstats.ttystate = portp->port.tty->flags;
stli_comstats.rxbuffered = -1;
- if (portp->tty->termios != NULL) {
- stli_comstats.cflags = portp->tty->termios->c_cflag;
- stli_comstats.iflags = portp->tty->termios->c_iflag;
- stli_comstats.oflags = portp->tty->termios->c_oflag;
- stli_comstats.lflags = portp->tty->termios->c_lflag;
+ if (portp->port.tty->termios != NULL) {
+ stli_comstats.cflags = portp->port.tty->termios->c_cflag;
+ stli_comstats.iflags = portp->port.tty->termios->c_iflag;
+ stli_comstats.oflags = portp->port.tty->termios->c_oflag;
+ stli_comstats.lflags = portp->port.tty->termios->c_lflag;
}
}
}
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index e21346d..2bba250 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -130,17 +130,13 @@
};
struct moxa_port {
+ struct tty_port port;
struct moxa_board_conf *board;
- struct tty_struct *tty;
void __iomem *tableAddr;
int type;
- int close_delay;
- unsigned int count;
- int asyncflags;
int cflag;
unsigned long statusflags;
- wait_queue_head_t open_wait;
u8 DCDState;
u8 lineCtrl;
@@ -348,10 +344,10 @@
if (status & 4)
tmp.dcd = 1;
- if (!p->tty || !p->tty->termios)
+ if (!p->port.tty || !p->port.tty->termios)
tmp.cflag = p->cflag;
else
- tmp.cflag = p->tty->termios->c_cflag;
+ tmp.cflag = p->port.tty->termios->c_cflag;
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp))) {
mutex_unlock(&moxa_openlock);
@@ -825,10 +821,9 @@
}
for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+ tty_port_init(&p->port);
p->type = PORT_16550A;
- p->close_delay = 5 * HZ / 10;
p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- init_waitqueue_head(&p->open_wait);
}
switch (brd->boardType) {
@@ -884,12 +879,12 @@
/* pci hot-un-plug support */
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
- tty_hangup(brd->ports[a].tty);
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
+ tty_hangup(brd->ports[a].port.tty);
while (1) {
opened = 0;
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
opened++;
mutex_unlock(&moxa_openlock);
if (!opened)
@@ -1104,9 +1099,9 @@
{
moxa_shut_down(ch);
MoxaPortFlushData(ch, 2);
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
- ch->tty->driver_data = NULL;
- ch->tty = NULL;
+ ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ ch->port.tty->driver_data = NULL;
+ ch->port.tty = NULL;
}
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
@@ -1117,7 +1112,7 @@
u8 dcd;
while (1) {
- prepare_to_wait(&ch->open_wait, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(&ch->port.open_wait, &wait, TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp)) {
#ifdef SERIAL_DO_RESTART
retval = -ERESTARTSYS;
@@ -1138,7 +1133,7 @@
}
schedule();
}
- finish_wait(&ch->open_wait, &wait);
+ finish_wait(&ch->port.open_wait, &wait);
return retval;
}
@@ -1163,16 +1158,16 @@
}
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
- ch->count++;
+ ch->port.count++;
tty->driver_data = ch;
- ch->tty = tty;
- if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
+ ch->port.tty = tty;
+ if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
MoxaSetFifo(ch, ch->type == PORT_16550A);
- ch->asyncflags |= ASYNC_INITIALIZED;
+ ch->port.flags |= ASYNC_INITIALIZED;
}
mutex_unlock(&moxa_openlock);
@@ -1181,11 +1176,11 @@
retval = moxa_block_till_ready(tty, filp, ch);
mutex_lock(&moxa_openlock);
if (retval) {
- if (ch->count) /* 0 means already hung up... */
- if (--ch->count == 0)
+ if (ch->port.count) /* 0 means already hung up... */
+ if (--ch->port.count == 0)
moxa_close_port(ch);
} else
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+ ch->port.flags |= ASYNC_NORMAL_ACTIVE;
mutex_unlock(&moxa_openlock);
return retval;
@@ -1204,21 +1199,21 @@
ch = tty->driver_data;
if (ch == NULL)
goto unlock;
- if (tty->count == 1 && ch->count != 1) {
+ if (tty->count == 1 && ch->port.count != 1) {
printk(KERN_WARNING "moxa_close: bad serial port count; "
- "tty->count is 1, ch->count is %d\n", ch->count);
- ch->count = 1;
+ "tty->count is 1, ch->port.count is %d\n", ch->port.count);
+ ch->port.count = 1;
}
- if (--ch->count < 0) {
+ if (--ch->port.count < 0) {
printk(KERN_WARNING "moxa_close: bad serial port count, "
"device=%s\n", tty->name);
- ch->count = 0;
+ ch->port.count = 0;
}
- if (ch->count)
+ if (ch->port.count)
goto unlock;
ch->cflag = tty->termios->c_cflag;
- if (ch->asyncflags & ASYNC_INITIALIZED) {
+ if (ch->port.flags & ASYNC_INITIALIZED) {
moxa_setup_empty_event(tty);
tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
}
@@ -1374,7 +1369,7 @@
return;
moxa_set_tty_param(tty, old_termios);
if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
}
static void moxa_stop(struct tty_struct *tty)
@@ -1412,20 +1407,20 @@
mutex_unlock(&moxa_openlock);
return;
}
- ch->count = 0;
+ ch->port.count = 0;
moxa_close_port(ch);
mutex_unlock(&moxa_openlock);
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
}
static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
{
dcd = !!dcd;
- if (dcd != p->DCDState && p->tty && C_CLOCAL(p->tty)) {
+ if (dcd != p->DCDState && p->port.tty && C_CLOCAL(p->port.tty)) {
if (!dcd)
- tty_hangup(p->tty);
+ tty_hangup(p->port.tty);
}
p->DCDState = dcd;
}
@@ -1433,9 +1428,9 @@
static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
u16 __iomem *ip)
{
- struct tty_struct *tty = p->tty;
+ struct tty_struct *tty = p->port.tty;
void __iomem *ofsAddr;
- unsigned int inited = p->asyncflags & ASYNC_INITIALIZED;
+ unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
u16 intr;
if (tty) {
@@ -1566,9 +1561,9 @@
static void moxa_shut_down(struct moxa_port *ch)
{
- struct tty_struct *tp = ch->tty;
+ struct tty_struct *tp = ch->port.tty;
- if (!(ch->asyncflags & ASYNC_INITIALIZED))
+ if (!(ch->port.flags & ASYNC_INITIALIZED))
return;
MoxaPortDisable(ch);
@@ -1580,7 +1575,7 @@
MoxaPortLineCtrl(ch, 0, 0);
spin_lock_bh(&moxa_lock);
- ch->asyncflags &= ~ASYNC_INITIALIZED;
+ ch->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_bh(&moxa_lock);
}
@@ -1975,7 +1970,7 @@
c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
if (c > len)
c = len;
- moxaLog.txcnt[port->tty->index] += c;
+ moxaLog.txcnt[port->port.tty->index] += c;
total = c;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_txb);
@@ -2017,7 +2012,7 @@
static int MoxaPortReadData(struct moxa_port *port)
{
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty;
unsigned char *dst;
void __iomem *baseAddr, *ofsAddr, *ofs;
unsigned int count, len, total;
@@ -2124,10 +2119,10 @@
{
struct serial_struct tmp = {
.type = info->type,
- .line = info->tty->index,
- .flags = info->asyncflags,
+ .line = info->port.tty->index,
+ .flags = info->port.flags,
.baud_base = 921600,
- .close_delay = info->close_delay
+ .close_delay = info->port.close_delay
};
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
@@ -2148,13 +2143,13 @@
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->asyncflags & ~ASYNC_USR_MASK)))
+ (info->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
} else
- info->close_delay = new_serial.close_delay * HZ / 100;
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
- new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
+ new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
MoxaSetFifo(info, new_serial.type == PORT_16550A);
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 4b81a85..6307e30 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -222,8 +222,8 @@
struct mxser_board;
struct mxser_port {
+ struct tty_port port;
struct mxser_board *board;
- struct tty_struct *tty;
unsigned long ioaddr;
unsigned long opmode_ioaddr;
@@ -234,7 +234,6 @@
int rx_low_water;
int baud_base; /* max. speed */
int type; /* UART type */
- int flags; /* defined in tty.h */
int x_char; /* xon/xoff character */
int IER; /* Interrupt Enable Register */
@@ -244,20 +243,14 @@
unsigned char ldisc_stop_rx;
int custom_divisor;
- int close_delay;
- unsigned short closing_wait;
unsigned char err_shadow;
- unsigned long event;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
struct async_icount icount; /* kernel counters for 4 input interrupts */
int timeout;
int read_status_mask;
int ignore_status_mask;
int xmit_fifo_size;
- unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
@@ -267,7 +260,6 @@
struct mxser_mon mon_data;
spinlock_t slock;
- wait_queue_head_t open_wait;
wait_queue_head_t delta_msr_wait;
};
@@ -575,7 +567,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
test_bit(TTY_IO_ERROR, &tty->flags)) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -585,32 +577,32 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
+ * this loop, port->port.count is dropped by one, so that
* mxser_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&port->slock, flags);
if (!tty_hung_up_p(filp))
- port->count--;
+ port->port.count--;
spin_unlock_irqrestore(&port->slock, flags);
- port->blocked_open++;
+ port->port.blocked_open++;
while (1) {
spin_lock_irqsave(&port->slock, flags);
outb(inb(port->ioaddr + UART_MCR) |
UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
spin_unlock_irqrestore(&port->slock, flags);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal ||
(inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
break;
@@ -621,13 +613,13 @@
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
+ port->port.count++;
+ port->port.blocked_open--;
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -636,7 +628,7 @@
int quot = 0, baud;
unsigned char cval;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return -1;
if (!(info->ioaddr))
@@ -647,13 +639,13 @@
if (newspd == 134) {
quot = 2 * info->baud_base / 269;
- tty_encode_baud_rate(info->tty, 134, 134);
+ tty_encode_baud_rate(info->port.tty, 134, 134);
} else if (newspd) {
quot = info->baud_base / newspd;
if (quot == 0)
quot = 1;
baud = info->baud_base/quot;
- tty_encode_baud_rate(info->tty, baud, baud);
+ tty_encode_baud_rate(info->port.tty, baud, baud);
} else {
quot = 0;
}
@@ -679,7 +671,7 @@
outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
#ifdef BOTHER
- if (C_BAUD(info->tty) == BOTHER) {
+ if (C_BAUD(info->port.tty) == BOTHER) {
quot = info->baud_base % newspd;
quot *= 8;
if (quot % newspd > newspd / 2) {
@@ -707,14 +699,14 @@
int ret = 0;
unsigned char status;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return ret;
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
if (!(info->ioaddr))
return ret;
- if (mxser_set_baud_method[info->tty->index] == 0)
- mxser_set_baud(info, tty_get_baud_rate(info->tty));
+ if (mxser_set_baud_method[info->port.tty->index] == 0)
+ mxser_set_baud(info, tty_get_baud_rate(info->port.tty));
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -777,15 +769,15 @@
info->IER &= ~UART_IER_MSI;
info->MCR &= ~UART_MCR_AFE;
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
info->MCR |= UART_MCR_AFE;
} else {
status = inb(info->ioaddr + UART_MSR);
- if (info->tty->hw_stopped) {
+ if (info->port.tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- info->tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
if (info->type != PORT_16550A &&
!info->board->chip_flag) {
outb(info->IER & ~UART_IER_THRI,
@@ -795,11 +787,11 @@
outb(info->IER, info->ioaddr +
UART_IER);
}
- tty_wakeup(info->tty);
+ tty_wakeup(info->port.tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
if ((info->type != PORT_16550A) &&
(!info->board->chip_flag)) {
info->IER &= ~UART_IER_THRI;
@@ -810,13 +802,13 @@
}
}
} else {
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
}
outb(info->MCR, info->ioaddr + UART_MCR);
if (cflag & CLOCAL) {
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
} else {
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
outb(info->IER, info->ioaddr + UART_IER);
@@ -825,21 +817,21 @@
* Set up parity check flag
*/
info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty)) {
+ if (I_IGNPAR(info->port.tty)) {
info->ignore_status_mask |=
UART_LSR_OE |
UART_LSR_PE |
@@ -851,16 +843,16 @@
}
}
if (info->board->chip_flag) {
- mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->tty));
- mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->tty));
- if (I_IXON(info->tty)) {
+ mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty));
+ mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty));
+ if (I_IXON(info->port.tty)) {
mxser_enable_must_rx_software_flow_control(
info->ioaddr);
} else {
mxser_disable_must_rx_software_flow_control(
info->ioaddr);
}
- if (I_IXOFF(info->tty)) {
+ if (I_IXOFF(info->port.tty)) {
mxser_enable_must_tx_software_flow_control(
info->ioaddr);
} else {
@@ -890,15 +882,15 @@
port->mon_data.modem_status = status;
wake_up_interruptible(&port->delta_msr_wait);
- if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+ if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
if (status & UART_MSR_DCD)
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- if (port->flags & ASYNC_CTS_FLOW) {
- if (port->tty->hw_stopped) {
+ if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (port->port.tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- port->tty->hw_stopped = 0;
+ port->port.tty->hw_stopped = 0;
if ((port->type != PORT_16550A) &&
(!port->board->chip_flag)) {
@@ -908,11 +900,11 @@
outb(port->IER, port->ioaddr +
UART_IER);
}
- tty_wakeup(port->tty);
+ tty_wakeup(port->port.tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- port->tty->hw_stopped = 1;
+ port->port.tty->hw_stopped = 1;
if (port->type != PORT_16550A &&
!port->board->chip_flag) {
port->IER &= ~UART_IER_THRI;
@@ -935,23 +927,23 @@
spin_lock_irqsave(&info->slock, flags);
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
if (!info->ioaddr || !info->type) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
- if (info->xmit_buf)
+ if (info->port.xmit_buf)
free_page(page);
else
- info->xmit_buf = (unsigned char *) page;
+ info->port.xmit_buf = (unsigned char *) page;
/*
* Clear the FIFO buffers and disable them
@@ -973,8 +965,8 @@
if (inb(info->ioaddr + UART_LSR) == 0xff) {
spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
return 0;
} else
return -ENODEV;
@@ -1012,15 +1004,15 @@
(void) inb(info->ioaddr + UART_IIR);
(void) inb(info->ioaddr + UART_MSR);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
mxser_change_speed(info, NULL);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->slock, flags);
return 0;
@@ -1034,7 +1026,7 @@
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
spin_lock_irqsave(&info->slock, flags);
@@ -1048,15 +1040,15 @@
/*
* Free the IRQ, if necessary
*/
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = NULL;
+ if (info->port.xmit_buf) {
+ free_page((unsigned long) info->port.xmit_buf);
+ info->port.xmit_buf = NULL;
}
info->IER = 0;
outb(0x00, info->ioaddr + UART_IER);
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
outb(info->MCR, info->ioaddr + UART_MCR);
@@ -1072,10 +1064,10 @@
/* read data port to reset things */
(void) inb(info->ioaddr + UART_RX);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
if (info->board->chip_flag)
SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
@@ -1105,12 +1097,12 @@
return -ENODEV;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
/*
* Start up serial port
*/
spin_lock_irqsave(&info->slock, flags);
- info->count++;
+ info->port.count++;
spin_unlock_irqrestore(&info->slock, flags);
retval = mxser_startup(info);
if (retval)
@@ -1170,42 +1162,42 @@
spin_unlock_irqrestore(&info->slock, flags);
return;
}
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
+ * structure will be freed. Info->port.count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk(KERN_ERR "mxser_close: bad serial port count; "
- "tty->count is 1, info->count is %d\n", info->count);
- info->count = 1;
+ "tty->count is 1, info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
- if (--info->count < 0) {
+ if (--info->port.count < 0) {
printk(KERN_ERR "mxser_close: bad serial port count for "
- "ttys%d: %d\n", tty->index, info->count);
- info->count = 0;
+ "ttys%d: %d\n", tty->index, info->port.count);
+ info->port.count = 0;
}
- if (info->count) {
+ if (info->port.count) {
spin_unlock_irqrestore(&info->slock, flags);
return;
}
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
spin_unlock_irqrestore(&info->slock, flags);
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*/
- if (info->flags & ASYNC_NORMAL_ACTIVE)
+ if (info->port.flags & ASYNC_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->port.closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
@@ -1216,7 +1208,7 @@
if (info->board->chip_flag)
info->IER &= ~MOXA_MUST_RECV_ISR;
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
outb(info->IER, info->ioaddr + UART_IER);
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1236,15 +1228,14 @@
tty_ldisc_flush(tty);
tty->closing = 0;
- info->event = 0;
- info->tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay)
- schedule_timeout_interruptible(info->close_delay);
- wake_up_interruptible(&info->open_wait);
+ info->port.tty = NULL;
+ if (info->port.blocked_open) {
+ if (info->port.close_delay)
+ schedule_timeout_interruptible(info->port.close_delay);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
}
static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
@@ -1253,7 +1244,7 @@
struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (!info->xmit_buf)
+ if (!info->port.xmit_buf)
return 0;
while (1) {
@@ -1262,7 +1253,7 @@
if (c <= 0)
break;
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
spin_lock_irqsave(&info->slock, flags);
info->xmit_head = (info->xmit_head + c) &
(SERIAL_XMIT_SIZE - 1);
@@ -1294,14 +1285,14 @@
struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (!info->xmit_buf)
+ if (!info->port.xmit_buf)
return 0;
if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
return 0;
spin_lock_irqsave(&info->slock, flags);
- info->xmit_buf[info->xmit_head++] = ch;
+ info->port.xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE - 1;
info->xmit_cnt++;
spin_unlock_irqrestore(&info->slock, flags);
@@ -1327,7 +1318,7 @@
if (info->xmit_cnt <= 0 ||
tty->stopped ||
- !info->xmit_buf ||
+ !info->port.xmit_buf ||
(tty->hw_stopped &&
(info->type != PORT_16550A) &&
(!info->board->chip_flag)
@@ -1370,13 +1361,13 @@
{
struct serial_struct tmp = {
.type = info->type,
- .line = info->tty->index,
+ .line = info->port.tty->index,
.port = info->ioaddr,
.irq = info->board->irq,
- .flags = info->flags,
+ .flags = info->port.flags,
.baud_base = info->baud_base,
- .close_delay = info->close_delay,
- .closing_wait = info->closing_wait,
+ .close_delay = info->port.close_delay,
+ .closing_wait = info->port.closing_wait,
.custom_divisor = info->custom_divisor,
.hub6 = 0
};
@@ -1403,33 +1394,33 @@
new_serial.port != info->ioaddr)
return -EINVAL;
- flags = info->flags & ASYNC_SPD_MASK;
+ flags = info->port.flags & ASYNC_SPD_MASK;
if (!capable(CAP_SYS_ADMIN)) {
if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK)))
+ (new_serial.close_delay != info->port.close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
} else {
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
- info->close_delay = new_serial.close_delay * HZ / 100;
- info->closing_wait = new_serial.closing_wait * HZ / 100;
- info->tty->low_latency =
- (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
- info->tty->low_latency = 0;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
+ info->port.closing_wait = new_serial.closing_wait * HZ / 100;
+ info->port.tty->low_latency =
+ (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = 0;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
(new_serial.baud_base != info->baud_base ||
new_serial.custom_divisor !=
info->custom_divisor)) {
baud = new_serial.baud_base / new_serial.custom_divisor;
- tty_encode_baud_rate(info->tty, baud, baud);
+ tty_encode_baud_rate(info->port.tty, baud, baud);
}
}
@@ -1437,8 +1428,8 @@
process_txrx_fifo(info);
- if (info->flags & ASYNC_INITIALIZED) {
- if (flags != (info->flags & ASYNC_SPD_MASK)) {
+ if (info->port.flags & ASYNC_INITIALIZED) {
+ if (flags != (info->port.flags & ASYNC_SPD_MASK)) {
spin_lock_irqsave(&info->slock, sl_flags);
mxser_change_speed(info, NULL);
spin_unlock_irqrestore(&info->slock, sl_flags);
@@ -1693,12 +1684,12 @@
continue;
}
- if (!port->tty || !port->tty->termios)
+ if (!port->port.tty || !port->port.tty->termios)
GMStatus[i].cflag =
port->normal_termios.c_cflag;
else
GMStatus[i].cflag =
- port->tty->termios->c_cflag;
+ port->port.tty->termios->c_cflag;
status = inb(port->ioaddr + UART_MSR);
if (status & 0x80 /*UART_MSR_DCD */ )
@@ -1755,14 +1746,14 @@
mon_data_ext.modem_status[i] =
port->mon_data.modem_status;
mon_data_ext.baudrate[i] =
- tty_get_baud_rate(port->tty);
+ tty_get_baud_rate(port->port.tty);
- if (!port->tty || !port->tty->termios) {
+ if (!port->port.tty || !port->port.tty->termios) {
cflag = port->normal_termios.c_cflag;
iflag = port->normal_termios.c_iflag;
} else {
- cflag = port->tty->termios->c_cflag;
- iflag = port->tty->termios->c_iflag;
+ cflag = port->port.tty->termios->c_cflag;
+ iflag = port->port.tty->termios->c_iflag;
}
mon_data_ext.databits[i] = cflag & CSIZE;
@@ -1989,7 +1980,7 @@
else
info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
- if (info->tty->hw_stopped)
+ if (info->port.tty->hw_stopped)
info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
else
info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
@@ -2038,7 +2029,7 @@
}
}
- if (info->tty->termios->c_cflag & CRTSCTS) {
+ if (info->port.tty->termios->c_cflag & CRTSCTS) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -2075,7 +2066,7 @@
}
}
- if (info->tty->termios->c_cflag & CRTSCTS) {
+ if (info->port.tty->termios->c_cflag & CRTSCTS) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -2106,7 +2097,7 @@
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
- if (info->xmit_cnt && info->xmit_buf) {
+ if (info->xmit_cnt && info->port.xmit_buf) {
outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
info->IER |= UART_IER_THRI;
outb(info->IER, info->ioaddr + UART_IER);
@@ -2219,11 +2210,10 @@
mxser_flush_buffer(tty);
mxser_shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+ wake_up_interruptible(&info->port.open_wait);
}
/*
@@ -2246,7 +2236,7 @@
static void mxser_receive_chars(struct mxser_port *port, int *status)
{
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty;
unsigned char ch, gdl;
int ignored = 0;
int cnt = 0;
@@ -2302,7 +2292,7 @@
flag = TTY_BREAK;
port->icount.brk++;
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (*status & UART_LSR_PE) {
flag = TTY_PARITY;
@@ -2333,7 +2323,7 @@
} while (*status & UART_LSR_DR);
end_intr:
- mxvar_log.rxcnt[port->tty->index] += cnt;
+ mxvar_log.rxcnt[port->port.tty->index] += cnt;
port->mon_data.rxcnt += cnt;
port->mon_data.up_rxcnt += cnt;
@@ -2354,18 +2344,18 @@
if (port->x_char) {
outb(port->x_char, port->ioaddr + UART_TX);
port->x_char = 0;
- mxvar_log.txcnt[port->tty->index]++;
+ mxvar_log.txcnt[port->port.tty->index]++;
port->mon_data.txcnt++;
port->mon_data.up_txcnt++;
port->icount.tx++;
return;
}
- if (port->xmit_buf == NULL)
+ if (port->port.xmit_buf == NULL)
return;
- if ((port->xmit_cnt <= 0) || port->tty->stopped ||
- (port->tty->hw_stopped &&
+ if ((port->xmit_cnt <= 0) || port->port.tty->stopped ||
+ (port->port.tty->hw_stopped &&
(port->type != PORT_16550A) &&
(!port->board->chip_flag))) {
port->IER &= ~UART_IER_THRI;
@@ -2376,20 +2366,20 @@
cnt = port->xmit_cnt;
count = port->xmit_fifo_size;
do {
- outb(port->xmit_buf[port->xmit_tail++],
+ outb(port->port.xmit_buf[port->xmit_tail++],
port->ioaddr + UART_TX);
port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
- mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt);
+ mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt);
port->mon_data.txcnt += (cnt - port->xmit_cnt);
port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
port->icount.tx += (cnt - port->xmit_cnt);
if (port->xmit_cnt < WAKEUP_CHARS)
- tty_wakeup(port->tty);
+ tty_wakeup(port->port.tty);
if (port->xmit_cnt <= 0) {
port->IER &= ~UART_IER_THRI;
@@ -2440,9 +2430,9 @@
if (iir & UART_IIR_NO_INT)
break;
iir &= MOXA_MUST_IIR_MASK;
- if (!port->tty ||
- (port->flags & ASYNC_CLOSING) ||
- !(port->flags &
+ if (!port->port.tty ||
+ (port->port.flags & ASYNC_CLOSING) ||
+ !(port->port.flags &
ASYNC_INITIALIZED)) {
status = inb(port->ioaddr + UART_LSR);
outb(0x27, port->ioaddr + UART_FCR);
@@ -2550,6 +2540,7 @@
for (i = 0; i < brd->info->nports; i++) {
info = &brd->ports[i];
+ tty_port_init(&info->port);
info->board = brd;
info->stop_rx = 0;
info->ldisc_stop_rx = 0;
@@ -2558,16 +2549,15 @@
if (brd->chip_flag != MOXA_OTHER_UART)
mxser_enable_must_enchance_mode(info->ioaddr);
- info->flags = ASYNC_SHARE_IRQ;
+ info->port.flags = ASYNC_SHARE_IRQ;
info->type = brd->uart_type;
process_txrx_fifo(info);
info->custom_divisor = info->baud_base * 16;
- info->close_delay = 5 * HZ / 10;
- info->closing_wait = 30 * HZ;
+ info->port.close_delay = 5 * HZ / 10;
+ info->port.closing_wait = 30 * HZ;
info->normal_termios = mxvar_sdriver->init_termios;
- init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->delta_msr_wait);
memset(&info->mon_data, 0, sizeof(struct mxser_mon));
info->err_shadow = 0;
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index a35bfd7..ed4e033 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -199,7 +199,7 @@
#define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
#define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty)
-static struct tty_ldisc n_hdlc_ldisc = {
+static struct tty_ldisc_ops n_hdlc_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "hdlc",
@@ -342,8 +342,8 @@
#endif
/* Flush any pending characters in the driver and discipline. */
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ if (tty->ldisc.ops->flush_buffer)
+ tty->ldisc.ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 9021690..ae377aa 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -143,7 +143,7 @@
static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count);
-static struct tty_ldisc tty_ldisc_N_R3964 = {
+static struct tty_ldisc_ops tty_ldisc_N_R3964 = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "R3964",
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 8096389..708c2b1 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1573,7 +1573,7 @@
return mask;
}
-struct tty_ldisc tty_ldisc_N_TTY = {
+struct tty_ldisc_ops tty_ldisc_N_TTY = {
.magic = TTY_LDISC_MAGIC,
.name = "n_tty",
.open = n_tty_open,
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 1dd0e99..95743e2 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -514,8 +514,8 @@
return;
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->receive_buf)
- ld->receive_buf(tty, data, flags, count);
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 0a05c03..76b2793 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -111,7 +111,7 @@
c = to->receive_room;
if (c > count)
c = count;
- to->ldisc.receive_buf(to, buf, NULL, c);
+ to->ldisc.ops->receive_buf(to, buf, NULL, c);
return c;
}
@@ -149,11 +149,11 @@
int count;
/* We should get the line discipline lock for "tty->link" */
- if (!to || !to->ldisc.chars_in_buffer)
+ if (!to || !to->ldisc.ops->chars_in_buffer)
return 0;
/* The ldisc must report 0 if no characters available to be read */
- count = to->ldisc.chars_in_buffer(to);
+ count = to->ldisc.ops->chars_in_buffer(to);
if (tty->driver->subtype == PTY_TYPE_SLAVE) return count;
@@ -186,8 +186,8 @@
if (!to)
return;
- if (to->ldisc.flush_buffer)
- to->ldisc.flush_buffer(to);
+ if (to->ldisc.ops->flush_buffer)
+ to->ldisc.ops->flush_buffer(to);
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index a03a538..5ab5167 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -35,9 +35,6 @@
***************************************************************************/
#ifndef _cirrus_h
-#ifndef lint
-/* static char* _cirrus_h_sccs = "@(#)cirrus.h 1.16"; */
-#endif
#define _cirrus_h 1
/* Bit fields for particular registers shared with driver */
diff --git a/drivers/char/rio/cmdblk.h b/drivers/char/rio/cmdblk.h
index c46b2fd..9ed4f86 100644
--- a/drivers/char/rio/cmdblk.h
+++ b/drivers/char/rio/cmdblk.h
@@ -33,12 +33,6 @@
#ifndef __rio_cmdblk_h__
#define __rio_cmdblk_h__
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_cmdblk_h_sccs_ = "@(#)cmdblk.h 1.2";
-#endif
-#endif
-
/*
** the structure of a command block, used to queue commands destined for
** a rup.
diff --git a/drivers/char/rio/cmdpkt.h b/drivers/char/rio/cmdpkt.h
index 357ae57..c1e7a27 100644
--- a/drivers/char/rio/cmdpkt.h
+++ b/drivers/char/rio/cmdpkt.h
@@ -32,12 +32,6 @@
#ifndef __rio_cmdpkt_h__
#define __rio_cmdpkt_h__
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_cmdpkt_h_sccs_ = "@(#)cmdpkt.h 1.2";
-#endif
-#endif
-
/*
** overlays for the data area of a packet. Used in both directions
** (to build a packet to send, and to interpret a packet that arrives)
diff --git a/drivers/char/rio/daemon.h b/drivers/char/rio/daemon.h
index 6e63f8b..4af9032 100644
--- a/drivers/char/rio/daemon.h
+++ b/drivers/char/rio/daemon.h
@@ -33,12 +33,6 @@
#ifndef __rio_daemon_h__
#define __rio_daemon_h__
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_daemon_h_sccs_ = "@(#)daemon.h 1.3";
-#endif
-#endif
-
/*
** structures used on /dev/rio
diff --git a/drivers/char/rio/errors.h b/drivers/char/rio/errors.h
index 1d0d891..bdb0523 100644
--- a/drivers/char/rio/errors.h
+++ b/drivers/char/rio/errors.h
@@ -33,12 +33,6 @@
#ifndef __rio_errors_h__
#define __rio_errors_h__
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_errors_h_sccs_ = "@(#)errors.h 1.2";
-#endif
-#endif
-
/*
** error codes
*/
diff --git a/drivers/char/rio/func.h b/drivers/char/rio/func.h
index 9e7283b..078d44f 100644
--- a/drivers/char/rio/func.h
+++ b/drivers/char/rio/func.h
@@ -35,12 +35,6 @@
#include <linux/kdev_t.h>
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_func_h_sccs_ = "@(#)func.h 1.3";
-#endif
-#endif
-
/* rioboot.c */
int RIOBootCodeRTA(struct rio_info *, struct DownLoad *);
int RIOBootCodeHOST(struct rio_info *, struct DownLoad *);
diff --git a/drivers/char/rio/map.h b/drivers/char/rio/map.h
index bdbcd09..8366978 100644
--- a/drivers/char/rio/map.h
+++ b/drivers/char/rio/map.h
@@ -33,10 +33,6 @@
#ifndef __rio_map_h__
#define __rio_map_h__
-#ifdef SCCS_LABELS
-static char *_map_h_sccs_ = "@(#)map.h 1.2";
-#endif
-
/*
** mapping structure passed to and from the config.rio program to
** determine the current topology of the world
diff --git a/drivers/char/rio/param.h b/drivers/char/rio/param.h
index 675c200..7e9b628 100644
--- a/drivers/char/rio/param.h
+++ b/drivers/char/rio/param.h
@@ -33,11 +33,6 @@
#ifndef __rio_param_h__
#define __rio_param_h__
-#ifdef SCCS_LABELS
-static char *_param_h_sccs_ = "@(#)param.h 1.2";
-#endif
-
-
/*
** the param command block, as used in OPEN and PARAM calls.
*/
diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h
index 9764ef8..acc8fa4 100644
--- a/drivers/char/rio/parmmap.h
+++ b/drivers/char/rio/parmmap.h
@@ -37,13 +37,6 @@
#ifndef _parmap_h
#define _parmap_h
-
-#ifdef SCCS_LABELS
-#ifndef lint
-/* static char *_rio_parmmap_h_sccs = "@(#)parmmap.h 1.4"; */
-#endif
-#endif
-
typedef struct PARM_MAP PARM_MAP;
struct PARM_MAP {
diff --git a/drivers/char/rio/pci.h b/drivers/char/rio/pci.h
index 1eba911..6032f91 100644
--- a/drivers/char/rio/pci.h
+++ b/drivers/char/rio/pci.h
@@ -33,10 +33,6 @@
#ifndef __rio_pci_h__
#define __rio_pci_h__
-#ifdef SCCS_LABELS
-static char *_pci_h_sccs_ = "@(#)pci.h 1.2";
-#endif
-
/*
** PCI stuff
*/
diff --git a/drivers/char/rio/protsts.h b/drivers/char/rio/protsts.h
index 69fc4bc..8ab7940 100644
--- a/drivers/char/rio/protsts.h
+++ b/drivers/char/rio/protsts.h
@@ -37,13 +37,6 @@
#ifndef _protsts_h
#define _protsts_h 1
-
-#ifdef SCCS_LABELS
-#ifndef lint
-/* static char *_rio_protsts_h_sccs = "@(#)protsts.h 1.4"; */
-#endif
-#endif
-
/*************************************************
* ACK bit. Last Packet received OK. Set by
* rxpkt to indicate that the Packet has been
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 412777c..0cdfee1 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -25,11 +25,6 @@
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
* USA.
*
- * Revision history:
- * $Log: rio.c,v $
- * Revision 1.1 1999/07/11 10:13:54 wolff
- * Initial revision
- *
* */
#include <linux/module.h>
@@ -436,7 +431,7 @@
{
func_enter();
- /* port->gs.flags &= ~GS_TX_INTEN; */
+ /* port->gs.port.flags &= ~GS_TX_INTEN; */
func_exit();
}
@@ -460,7 +455,7 @@
* In general we cannot count on "tx empty" interrupts, although
* the interrupt routine seems to be able to tell the difference.
*/
- PortP->gs.flags &= ~GS_TX_INTEN;
+ PortP->gs.port.flags &= ~GS_TX_INTEN;
func_exit();
}
@@ -515,7 +510,7 @@
func_enter();
PortP = (struct Port *) ptr;
- PortP->gs.tty = NULL;
+ PortP->gs.port.tty = NULL;
func_exit();
}
@@ -534,7 +529,7 @@
func_enter();
PortP = (struct Port *) ptr;
- PortP->gs.tty = NULL;
+ PortP->gs.port.tty = NULL;
func_exit();
}
@@ -554,12 +549,12 @@
riotclose(ptr);
- if (PortP->gs.count) {
- printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.count);
- PortP->gs.count = 0;
+ if (PortP->gs.port.count) {
+ printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.port.count);
+ PortP->gs.port.count = 0;
}
- PortP->gs.tty = NULL;
+ PortP->gs.port.tty = NULL;
func_exit();
}
@@ -854,8 +849,8 @@
/*
* Initializing wait queue
*/
- init_waitqueue_head(&port->gs.open_wait);
- init_waitqueue_head(&port->gs.close_wait);
+ init_waitqueue_head(&port->gs.port.open_wait);
+ init_waitqueue_head(&port->gs.port.close_wait);
}
#else
/* We could postpone initializing them to when they are configured. */
diff --git a/drivers/char/rio/rioboard.h b/drivers/char/rio/rioboard.h
index 822c071..2522300 100644
--- a/drivers/char/rio/rioboard.h
+++ b/drivers/char/rio/rioboard.h
@@ -29,12 +29,6 @@
/* */
/************************************************************************/
-/* History...
-
-1.0.0 26/04/99 NPV Creation.
-
-*/
-
#ifndef _rioboard_h /* If RIOBOARD.H not already defined */
#define _rioboard_h 1
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index 7b96e08..01f2654 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -30,9 +30,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_riocmd_c_sccs_ = "@(#)riocmd.c 1.2";
-#endif
#include <linux/module.h>
#include <linux/slab.h>
@@ -487,12 +484,12 @@
** If the device is a modem, then check the modem
** carrier.
*/
- if (PortP->gs.tty == NULL)
+ if (PortP->gs.port.tty == NULL)
break;
- if (PortP->gs.tty->termios == NULL)
+ if (PortP->gs.port.tty->termios == NULL)
break;
- if (!(PortP->gs.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) {
+ if (!(PortP->gs.port.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) {
rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n");
/*
@@ -509,7 +506,7 @@
** wakeup anyone in WOPEN
*/
if (PortP->State & (PORT_ISOPEN | RIO_WOPEN))
- wake_up_interruptible(&PortP->gs.open_wait);
+ wake_up_interruptible(&PortP->gs.port.open_wait);
}
} else {
/*
@@ -517,7 +514,7 @@
*/
if (PortP->State & RIO_CARR_ON) {
if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN))
- tty_hangup(PortP->gs.tty);
+ tty_hangup(PortP->gs.port.tty);
PortP->State &= ~RIO_CARR_ON;
rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n");
}
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d65ceb9..eecee0f 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -29,10 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_rioctrl_c_sccs_ = "@(#)rioctrl.c 1.3";
-#endif
-
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/char/rio/riodrvr.h b/drivers/char/rio/riodrvr.h
index 3cffe27..0907e71 100644
--- a/drivers/char/rio/riodrvr.h
+++ b/drivers/char/rio/riodrvr.h
@@ -35,10 +35,6 @@
#include <asm/param.h> /* for HZ */
-#ifdef SCCS_LABELS
-static char *_riodrvr_h_sccs_ = "@(#)riodrvr.h 1.3";
-#endif
-
#define MEMDUMP_SIZE 32
#define MOD_DISABLE (RIO_NOREAD|RIO_NOWRITE|RIO_NOXPRINT)
diff --git a/drivers/char/rio/rioinfo.h b/drivers/char/rio/rioinfo.h
index 8de7966..42ff1e7 100644
--- a/drivers/char/rio/rioinfo.h
+++ b/drivers/char/rio/rioinfo.h
@@ -33,10 +33,6 @@
#ifndef __rioinfo_h
#define __rioinfo_h
-#ifdef SCCS_LABELS
-static char *_rioinfo_h_sccs_ = "@(#)rioinfo.h 1.2";
-#endif
-
/*
** Host card data structure
*/
diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c
index add1718..be0ba40 100644
--- a/drivers/char/rio/rioinit.c
+++ b/drivers/char/rio/rioinit.c
@@ -29,9 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_rioinit_c_sccs_ = "@(#)rioinit.c 1.3";
-#endif
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c
index ea21686..71f8760 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/char/rio/riointr.c
@@ -29,10 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_riointr_c_sccs_ = "@(#)riointr.c 1.2";
-#endif
-
#include <linux/module.h>
#include <linux/slab.h>
@@ -106,7 +102,7 @@
PortP = (struct Port *) en;
p = (struct rio_info *) PortP->p;
- tty = PortP->gs.tty;
+ tty = PortP->gs.port.tty;
rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt);
@@ -162,7 +158,7 @@
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN))
- tty_wakeup(PortP->gs.tty);
+ tty_wakeup(PortP->gs.port.tty);
}
@@ -245,7 +241,7 @@
** find corresponding tty structure. The process of mapping
** the ports puts these here.
*/
- ttyP = PortP->gs.tty;
+ ttyP = PortP->gs.port.tty;
/*
** Lock the port before we begin working on it.
@@ -339,7 +335,7 @@
** find corresponding tty structure. The process of mapping
** the ports puts these here.
*/
- ttyP = PortP->gs.tty;
+ ttyP = PortP->gs.port.tty;
/* If ttyP is NULL, the port is getting closed. Forget about it. */
if (!ttyP) {
rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n");
@@ -546,7 +542,7 @@
intCount++;
- TtyP = PortP->gs.tty;
+ TtyP = PortP->gs.port.tty;
if (!TtyP) {
rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
return;
diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c
index 4810b84..d687c17 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/char/rio/rioparam.c
@@ -30,10 +30,6 @@
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3";
-#endif
-
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
@@ -164,7 +160,7 @@
func_enter();
- TtyP = PortP->gs.tty;
+ TtyP = PortP->gs.port.tty;
rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);
diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c
index 7a9df7d..706c2a2 100644
--- a/drivers/char/rio/rioroute.c
+++ b/drivers/char/rio/rioroute.c
@@ -29,9 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_rioroute_c_sccs_ = "@(#)rioroute.c 1.3";
-#endif
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/char/rio/riospace.h b/drivers/char/rio/riospace.h
index 534f1f5..ffb31d4 100644
--- a/drivers/char/rio/riospace.h
+++ b/drivers/char/rio/riospace.h
@@ -33,10 +33,6 @@
#ifndef __rio_riospace_h__
#define __rio_riospace_h__
-#ifdef SCCS_LABELS
-static char *_riospace_h_sccs_ = "@(#)riospace.h 1.2";
-#endif
-
#define RIO_LOCATOR_LEN 16
#define MAX_RIO_BOARDS 4
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index 2b24488..3d15802 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -29,9 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_riotable_c_sccs_ = "@(#)riotable.c 1.2";
-#endif
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index c993548..2fb49e8 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -29,10 +29,6 @@
**
** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_riotty_c_sccs_ = "@(#)riotty.c 1.3";
-#endif
-
#define __EXPLICIT_DEF_H__
@@ -144,14 +140,14 @@
tty->driver_data = PortP;
- PortP->gs.tty = tty;
- PortP->gs.count++;
+ PortP->gs.port.tty = tty;
+ PortP->gs.port.count++;
rio_dprintk(RIO_DEBUG_TTY, "%d bytes in tx buffer\n", PortP->gs.xmit_cnt);
retval = gs_init_port(&PortP->gs);
if (retval) {
- PortP->gs.count--;
+ PortP->gs.port.count--;
return -ENXIO;
}
/*
@@ -297,7 +293,7 @@
** insert test for carrier here. -- ???
** I already see that test here. What's the deal? -- REW
*/
- if ((PortP->gs.tty->termios->c_cflag & CLOCAL) ||
+ if ((PortP->gs.port.tty->termios->c_cflag & CLOCAL) ||
(PortP->ModemState & RIOC_MSVR1_CD)) {
rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort);
/*
@@ -305,16 +301,16 @@
wakeup((caddr_t) &tp->tm.c_canq);
*/
PortP->State |= RIO_CARR_ON;
- wake_up_interruptible(&PortP->gs.open_wait);
+ wake_up_interruptible(&PortP->gs.port.open_wait);
} else { /* no carrier - wait for DCD */
/*
- while (!(PortP->gs.tty->termios->c_state & CARR_ON) &&
+ while (!(PortP->gs.port.tty->termios->c_state & CARR_ON) &&
!(filp->f_flags & O_NONBLOCK) && !p->RIOHalted )
*/
while (!(PortP->State & RIO_CARR_ON) && !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted) {
rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n", SysPort);
/*
- PortP->gs.tty->termios->c_state |= WOPEN;
+ PortP->gs.port.tty->termios->c_state |= WOPEN;
*/
PortP->State |= RIO_WOPEN;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
@@ -384,7 +380,7 @@
/* PortP = p->RIOPortp[SysPort]; */
rio_dprintk(RIO_DEBUG_TTY, "Port is at address %p\n", PortP);
/* tp = PortP->TtyP; *//* Get tty */
- tty = PortP->gs.tty;
+ tty = PortP->gs.port.tty;
rio_dprintk(RIO_DEBUG_TTY, "TTY is at address %p\n", tty);
if (PortP->gs.closing_wait)
diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h
index 769744e..20ed73f 100644
--- a/drivers/char/rio/route.h
+++ b/drivers/char/rio/route.h
@@ -37,12 +37,6 @@
#ifndef _route_h
#define _route_h
-#ifdef SCCS_LABELS
-#ifndef lint
-/* static char *_rio_route_h_sccs = "@(#)route.h 1.3"; */
-#endif
-#endif
-
#define MAX_LINKS 4
#define MAX_NODES 17 /* Maximum nodes in a subnet */
#define NODE_BYTES ((MAX_NODES / 8) + 1) /* Number of bytes needed for
diff --git a/drivers/char/rio/unixrup.h b/drivers/char/rio/unixrup.h
index 46bd532..7abf0cb 100644
--- a/drivers/char/rio/unixrup.h
+++ b/drivers/char/rio/unixrup.h
@@ -33,10 +33,6 @@
#ifndef __rio_unixrup_h__
#define __rio_unixrup_h__
-#ifdef SCCS_LABELS
-static char *_unixrup_h_sccs_ = "@(#)unixrup.h 1.2";
-#endif
-
/*
** UnixRup data structure. This contains pointers to actual RUPs on the
** host card, and all the command/boot control stuff.
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index f073c71..724b2b2 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -322,7 +322,7 @@
channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
if (channel < CD180_NCH) {
port = &rc_port[board_No(bp) * RC_NPORT + channel];
- if (port->flags & ASYNC_INITIALIZED)
+ if (port->port.flags & ASYNC_INITIALIZED)
return port;
}
printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
@@ -341,7 +341,7 @@
if (port == NULL)
return;
- tty = port->tty;
+ tty = port->port.tty;
#ifdef RC_REPORT_OVERRUN
status = rc_in(bp, CD180_RCSR);
@@ -364,7 +364,7 @@
printk(KERN_INFO "rc%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
flag = TTY_BREAK;
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RCSR_PE)
@@ -392,7 +392,7 @@
if (port == NULL)
return;
- tty = port->tty;
+ tty = port->port.tty;
count = rc_in(bp, CD180_RDCR);
@@ -422,7 +422,7 @@
if (port == NULL)
return;
- tty = port->tty;
+ tty = port->port.tty;
if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
@@ -467,7 +467,7 @@
count = CD180_NFIFO;
do {
- rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
+ rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
if (--port->xmit_cnt <= 0)
break;
@@ -492,12 +492,12 @@
if (port == NULL)
return;
- tty = port->tty;
+ tty = port->port.tty;
mcr = rc_in(bp, CD180_MCR);
if (mcr & MCR_CDCHG) {
if (rc_in(bp, CD180_MSVR) & MSVR_CD)
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
else
tty_hangup(tty);
}
@@ -632,15 +632,12 @@
*/
static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
{
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty;
unsigned long baud;
long tmp;
unsigned char cor1 = 0, cor3 = 0;
unsigned char mcor1 = 0, mcor2 = 0;
- if (tty == NULL || tty->termios == NULL)
- return;
-
port->IER = 0;
port->COR2 = 0;
port->MSVR = MSVR_RTS;
@@ -786,39 +783,30 @@
{
unsigned long flags;
- if (port->flags & ASYNC_INITIALIZED)
+ if (port->port.flags & ASYNC_INITIALIZED)
return 0;
- if (!port->xmit_buf) {
- /* We may sleep in get_zeroed_page() */
- unsigned long tmp = get_zeroed_page(GFP_KERNEL);
- if (tmp == 0)
- return -ENOMEM;
- if (port->xmit_buf)
- free_page(tmp);
- else
- port->xmit_buf = (unsigned char *) tmp;
- }
+ if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ return -ENOMEM;
+
spin_lock_irqsave(&riscom_lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
- if (port->count == 1)
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ if (port->port.count == 1)
bp->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
rc_change_speed(bp, port);
- port->flags |= ASYNC_INITIALIZED;
+ port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&riscom_lock, flags);
return 0;
}
/* Must be called with interrupts disabled */
-static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
+static void rc_shutdown_port(struct tty_struct *tty,
+ struct riscom_board *bp, struct riscom_port *port)
{
- struct tty_struct *tty;
-
- if (!(port->flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED))
return;
#ifdef RC_REPORT_OVERRUN
@@ -836,14 +824,8 @@
printk("].\n");
}
#endif
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
-
- tty = port->tty;
-
- if (tty == NULL || C_HUPCL(tty)) {
+ tty_port_free_xmit_buf(&port->port);
+ if (C_HUPCL(tty)) {
/* Drop DTR */
bp->DTR |= (1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
@@ -858,9 +840,8 @@
port->IER = 0;
rc_out(bp, CD180_IER, port->IER);
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
- port->flags &= ~ASYNC_INITIALIZED;
+ set_bit(TTY_IO_ERROR, &tty->flags);
+ port->port.flags &= ~ASYNC_INITIALIZED;
if (--bp->count < 0) {
printk(KERN_INFO "rc%d: rc_shutdown_port: "
@@ -890,9 +871,9 @@
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -904,7 +885,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -919,16 +900,16 @@
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&riscom_lock, flags);
if (!tty_hung_up_p(filp))
- port->count--;
+ port->port.count--;
spin_unlock_irqrestore(&riscom_lock, flags);
- port->blocked_open++;
+ port->port.blocked_open++;
while (1) {
spin_lock_irqsave(&riscom_lock, flags);
@@ -942,14 +923,14 @@
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || CD))
break;
if (signal_pending(current)) {
@@ -959,14 +940,14 @@
schedule();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
+ port->port.count++;
+ port->port.blocked_open--;
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -990,9 +971,9 @@
if (error)
return error;
- port->count++;
+ port->port.count++;
tty->driver_data = port;
- port->tty = tty;
+ port->port.tty = tty;
error = rc_setup_port(bp, port);
if (error == 0)
@@ -1031,28 +1012,28 @@
goto out;
bp = port_Board(port);
- if ((tty->count == 1) && (port->count != 1)) {
+ if ((tty->count == 1) && (port->port.count != 1)) {
printk(KERN_INFO "rc%d: rc_close: bad port count;"
" tty->count is 1, port count is %d\n",
- board_No(bp), port->count);
- port->count = 1;
+ board_No(bp), port->port.count);
+ port->port.count = 1;
}
- if (--port->count < 0) {
+ if (--port->port.count < 0) {
printk(KERN_INFO "rc%d: rc_close: bad port count "
"for tty%d: %d\n",
- board_No(bp), port_No(port), port->count);
- port->count = 0;
+ board_No(bp), port_No(port), port->port.count);
+ port->port.count = 0;
}
- if (port->count)
+ if (port->port.count)
goto out;
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
+ if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, port->port.closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
@@ -1060,7 +1041,7 @@
* line status register.
*/
port->IER &= ~IER_RXD;
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
port->IER &= ~IER_TXRDY;
port->IER |= IER_TXEMPTY;
rc_out(bp, CD180_CAR, port_No(port));
@@ -1077,19 +1058,19 @@
break;
}
}
- rc_shutdown_port(bp, port);
+ rc_shutdown_port(tty, bp, port);
rc_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
- port->tty = NULL;
- if (port->blocked_open) {
- if (port->close_delay)
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
- wake_up_interruptible(&port->open_wait);
+ port->port.tty = NULL;
+ if (port->port.blocked_open) {
+ if (port->port.close_delay)
+ msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&port->port.close_wait);
out:
spin_unlock_irqrestore(&riscom_lock, flags);
@@ -1108,9 +1089,6 @@
bp = port_Board(port);
- if (!tty || !port->xmit_buf)
- return 0;
-
while (1) {
spin_lock_irqsave(&riscom_lock, flags);
@@ -1119,7 +1097,7 @@
if (c <= 0)
break; /* lock continues to be held */
- memcpy(port->xmit_buf + port->xmit_head, buf, c);
+ memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
port->xmit_cnt += c;
@@ -1151,15 +1129,12 @@
if (rc_paranoia_check(port, tty->name, "rc_put_char"))
return 0;
- if (!tty || !port->xmit_buf)
- return 0;
-
spin_lock_irqsave(&riscom_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
goto out;
- port->xmit_buf[port->xmit_head++] = ch;
+ port->port.xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
port->xmit_cnt++;
ret = 1;
@@ -1177,8 +1152,7 @@
if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
return;
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf)
+ if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
return;
spin_lock_irqsave(&riscom_lock, flags);
@@ -1317,22 +1291,22 @@
return -EINVAL;
#endif
- change_speed = ((port->flags & ASYNC_SPD_MASK) !=
+ change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
if (!capable(CAP_SYS_ADMIN)) {
- if ((tmp.close_delay != port->close_delay) ||
- (tmp.closing_wait != port->closing_wait) ||
+ if ((tmp.close_delay != port->port.close_delay) ||
+ (tmp.closing_wait != port->port.closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+ port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
} else {
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
(tmp.flags & ASYNC_FLAGS));
- port->close_delay = tmp.close_delay;
- port->closing_wait = tmp.closing_wait;
+ port->port.close_delay = tmp.close_delay;
+ port->port.closing_wait = tmp.closing_wait;
}
if (change_speed) {
unsigned long flags;
@@ -1355,10 +1329,10 @@
tmp.line = port - rc_port;
tmp.port = bp->base;
tmp.irq = bp->irq;
- tmp.flags = port->flags;
+ tmp.flags = port->port.flags;
tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
- tmp.close_delay = port->close_delay * HZ/100;
- tmp.closing_wait = port->closing_wait * HZ/100;
+ tmp.close_delay = port->port.close_delay * HZ/100;
+ tmp.closing_wait = port->port.closing_wait * HZ/100;
tmp.xmit_fifo_size = CD180_NFIFO;
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -1480,7 +1454,7 @@
spin_lock_irqsave(&riscom_lock, flags);
- if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
+ if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
@@ -1498,11 +1472,11 @@
bp = port_Board(port);
- rc_shutdown_port(bp, port);
- port->count = 0;
- port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = NULL;
- wake_up_interruptible(&port->open_wait);
+ rc_shutdown_port(tty, bp, port);
+ port->port.count = 0;
+ port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->port.tty = NULL;
+ wake_up_interruptible(&port->port.open_wait);
}
static void rc_set_termios(struct tty_struct *tty,
@@ -1575,11 +1549,8 @@
}
memset(rc_port, 0, sizeof(rc_port));
for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
+ tty_port_init(&rc_port[i].port);
rc_port[i].magic = RISCOM8_MAGIC;
- rc_port[i].close_delay = 50 * HZ / 100;
- rc_port[i].closing_wait = 3000 * HZ / 100;
- init_waitqueue_head(&rc_port[i].open_wait);
- init_waitqueue_head(&rc_port[i].close_wait);
}
return 0;
}
diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h
index cdfdf43..c9876b3 100644
--- a/drivers/char/riscom8.h
+++ b/drivers/char/riscom8.h
@@ -66,23 +66,15 @@
struct riscom_port {
int magic;
+ struct tty_port port;
int baud_base;
- int flags;
- struct tty_struct * tty;
- int count;
- int blocked_open;
int timeout;
- int close_delay;
- unsigned char * xmit_buf;
int custom_divisor;
int xmit_head;
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
short wakeup_chars;
short break_length;
- unsigned short closing_wait;
unsigned char mark_mask;
unsigned char IER;
unsigned char MSVR;
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 743dc80..e670eae 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -72,6 +72,7 @@
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
+#include <linux/serial.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
@@ -81,7 +82,7 @@
#include <linux/completion.h>
#include <linux/wait.h>
#include <linux/pci.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/atomic.h>
#include <asm/unaligned.h>
#include <linux/bitops.h>
@@ -434,15 +435,15 @@
#endif
if (!info)
return;
- if (!info->tty) {
+ if (!info->port.tty) {
printk(KERN_WARNING "rp: WARNING %s called with "
- "info->tty==NULL\n", __func__);
+ "info->port.tty==NULL\n", __func__);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
return;
}
spin_lock_irqsave(&info->slock, flags);
- tty = info->tty;
+ tty = info->port.tty;
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
/* Loop sending data to FIFO until done or FIFO full */
@@ -502,13 +503,13 @@
"info->flags & NOT_INIT\n");
return;
}
- if (!info->tty) {
+ if (!info->port.tty) {
printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
- "info->tty==NULL\n");
+ "info->port.tty==NULL\n");
return;
}
cp = &info->channel;
- tty = info->tty;
+ tty = info->port.tty;
IntMask = sGetChanIntID(cp) & info->intmask;
#ifdef ROCKET_DEBUG_INTR
@@ -530,7 +531,7 @@
tty_hangup(tty);
}
info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
#ifdef ROCKET_DEBUG_INTR
if (IntMask & DELTA_CTS) { /* CTS change */
@@ -648,9 +649,9 @@
info->board = board;
info->aiop = aiop;
info->chan = chan;
- info->closing_wait = 3000;
- info->close_delay = 50;
- init_waitqueue_head(&info->open_wait);
+ info->port.closing_wait = 3000;
+ info->port.close_delay = 50;
+ init_waitqueue_head(&info->port.open_wait);
init_completion(&info->close_wait);
info->flags &= ~ROCKET_MODE_MASK;
switch (pc104[board][line]) {
@@ -717,7 +718,7 @@
unsigned rocketMode;
int bits, baud, divisor;
CHANNEL_t *cp;
- struct ktermios *t = info->tty->termios;
+ struct ktermios *t = info->port.tty->termios;
cp = &info->channel;
cflag = t->c_cflag;
@@ -750,7 +751,7 @@
}
/* baud rate */
- baud = tty_get_baud_rate(info->tty);
+ baud = tty_get_baud_rate(info->port.tty);
if (!baud)
baud = 9600;
divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
@@ -768,7 +769,7 @@
sSetBaud(cp, divisor);
/* FIXME: Should really back compute a baud rate from the divisor */
- tty_encode_baud_rate(info->tty, baud, baud);
+ tty_encode_baud_rate(info->port.tty, baud, baud);
if (cflag & CRTSCTS) {
info->intmask |= DELTA_CTS;
@@ -793,15 +794,15 @@
* Handle software flow control in the board
*/
#ifdef ROCKET_SOFT_FLOW
- if (I_IXON(info->tty)) {
+ if (I_IXON(info->port.tty)) {
sEnTxSoftFlowCtl(cp);
- if (I_IXANY(info->tty)) {
+ if (I_IXANY(info->port.tty)) {
sEnIXANY(cp);
} else {
sDisIXANY(cp);
}
- sSetTxXONChar(cp, START_CHAR(info->tty));
- sSetTxXOFFChar(cp, STOP_CHAR(info->tty));
+ sSetTxXONChar(cp, START_CHAR(info->port.tty));
+ sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty));
} else {
sDisTxSoftFlowCtl(cp);
sDisIXANY(cp);
@@ -813,24 +814,24 @@
* Set up ignore/read mask words
*/
info->read_status_mask = STMRCVROVRH | 0xFF;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= STMFRAMEH | STMPARITYH;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= STMBREAKH;
/*
* Characters to ignore
*/
info->ignore_status_mask = 0;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= STMBREAKH;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= STMRCVROVRH;
}
@@ -863,7 +864,7 @@
}
}
-/* info->count is considered critical, protected by spinlocks. */
+/* info->port.count is considered critical, protected by spinlocks. */
static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct r_port *info)
{
@@ -897,13 +898,13 @@
/*
* Block waiting for the carrier detect and the line to become free. While we are in
- * this loop, info->count is dropped by one, so that rp_close() knows when to free things.
+ * this loop, info->port.count is dropped by one, so that rp_close() knows when to free things.
* We restore it upon exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
#ifdef ROCKET_DEBUG_OPEN
- printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->count);
+ printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->port.count);
#endif
spin_lock_irqsave(&info->slock, flags);
@@ -912,10 +913,10 @@
#else
if (!tty_hung_up_p(filp)) {
extra_count = 1;
- info->count--;
+ info->port.count--;
}
#endif
- info->blocked_open++;
+ info->port.blocked_open++;
spin_unlock_irqrestore(&info->slock, flags);
@@ -940,24 +941,24 @@
}
#ifdef ROCKET_DEBUG_OPEN
printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n",
- info->line, info->count, info->flags);
+ info->line, info->port.count, info->flags);
#endif
schedule(); /* Don't hold spinlock here, will hang PC */
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
spin_lock_irqsave(&info->slock, flags);
if (extra_count)
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
spin_unlock_irqrestore(&info->slock, flags);
#ifdef ROCKET_DEBUG_OPEN
printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n",
- info->line, info->count);
+ info->line, info->port.count);
#endif
if (retval)
return retval;
@@ -1001,9 +1002,9 @@
info->xmit_buf = (unsigned char *) page;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
- if (info->count++ == 0) {
+ if (info->port.count++ == 0) {
atomic_inc(&rp_num_ports_open);
#ifdef ROCKET_DEBUG_OPEN
@@ -1012,7 +1013,7 @@
#endif
}
#ifdef ROCKET_DEBUG_OPEN
- printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->count);
+ printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count);
#endif
/*
@@ -1048,13 +1049,13 @@
* Set up the tty->alt_speed kludge
*/
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
- info->tty->alt_speed = 57600;
+ info->port.tty->alt_speed = 57600;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
- info->tty->alt_speed = 115200;
+ info->port.tty->alt_speed = 115200;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
- info->tty->alt_speed = 230400;
+ info->port.tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
- info->tty->alt_speed = 460800;
+ info->port.tty->alt_speed = 460800;
configure_r_port(info, NULL);
if (tty->termios->c_cflag & CBAUD) {
@@ -1076,7 +1077,7 @@
}
/*
- * Exception handler that closes a serial port. info->count is considered critical.
+ * Exception handler that closes a serial port. info->port.count is considered critical.
*/
static void rp_close(struct tty_struct *tty, struct file *filp)
{
@@ -1089,14 +1090,14 @@
return;
#ifdef ROCKET_DEBUG_OPEN
- printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->count);
+ printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count);
#endif
if (tty_hung_up_p(filp))
return;
spin_lock_irqsave(&info->slock, flags);
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1105,15 +1106,15 @@
* serial port won't be shutdown.
*/
printk(KERN_WARNING "rp_close: bad serial port count; "
- "tty->count is 1, info->count is %d\n", info->count);
- info->count = 1;
+ "tty->count is 1, info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
- if (--info->count < 0) {
+ if (--info->port.count < 0) {
printk(KERN_WARNING "rp_close: bad serial port count for "
- "ttyR%d: %d\n", info->line, info->count);
- info->count = 0;
+ "ttyR%d: %d\n", info->line, info->port.count);
+ info->port.count = 0;
}
- if (info->count) {
+ if (info->port.count) {
spin_unlock_irqrestore(&info->slock, flags);
return;
}
@@ -1137,8 +1138,8 @@
/*
* Wait for the transmit buffer to clear
*/
- if (info->closing_wait != ROCKET_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
+ if (info->port.closing_wait != ROCKET_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->port.closing_wait);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
@@ -1167,11 +1168,11 @@
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ if (info->port.blocked_open) {
+ if (info->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
} else {
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
@@ -1327,8 +1328,8 @@
memset(&tmp, 0, sizeof (tmp));
tmp.line = info->line;
tmp.flags = info->flags;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
+ tmp.close_delay = info->port.close_delay;
+ tmp.closing_wait = info->port.closing_wait;
tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
@@ -1353,17 +1354,17 @@
}
info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
+ info->port.close_delay = new_serial.close_delay;
+ info->port.closing_wait = new_serial.closing_wait;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
- info->tty->alt_speed = 57600;
+ info->port.tty->alt_speed = 57600;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
- info->tty->alt_speed = 115200;
+ info->port.tty->alt_speed = 115200;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
- info->tty->alt_speed = 230400;
+ info->port.tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
- info->tty->alt_speed = 460800;
+ info->port.tty->alt_speed = 460800;
configure_r_port(info, NULL);
return 0;
@@ -1636,13 +1637,13 @@
rp_flush_buffer(tty);
if (info->flags & ROCKET_CLOSING)
return;
- if (info->count)
+ if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
- info->count = 0;
+ info->port.count = 0;
info->flags &= ~ROCKET_NORMAL_ACTIVE;
- info->tty = NULL;
+ info->port.tty = NULL;
cp = &info->channel;
sDisRxFIFO(cp);
@@ -1653,7 +1654,7 @@
sClrTxXOFF(cp);
info->flags &= ~ROCKET_INITIALIZED;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
/*
@@ -1762,7 +1763,7 @@
/* Write remaining data into the port's xmit_buf */
while (1) {
- if (!info->tty) /* Seemingly obligatory check... */
+ if (!info->port.tty) /* Seemingly obligatory check... */
goto end;
c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
c = min(c, XMIT_BUF_SIZE - info->xmit_head);
diff --git a/drivers/char/rocket.h b/drivers/char/rocket.h
index ae6b04f..a8b0919 100644
--- a/drivers/char/rocket.h
+++ b/drivers/char/rocket.h
@@ -64,8 +64,8 @@
/*
* For closing_wait and closing_wait2
*/
-#define ROCKET_CLOSING_WAIT_NONE 65535
-#define ROCKET_CLOSING_WAIT_INF 0
+#define ROCKET_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE
+#define ROCKET_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF
/*
* Rocketport ioctls -- "RP"
diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h
index 143cc43..21f3ff5 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/char/rocket_int.h
@@ -1125,18 +1125,14 @@
struct r_port {
int magic;
+ struct tty_port port;
int line;
- int flags;
- int count;
- int blocked_open;
- struct tty_struct *tty;
+ int flags; /* Don't yet match the ASY_ flags!! */
unsigned int board:3;
unsigned int aiop:2;
unsigned int chan:3;
CONTROLLER_t *ctlp;
CHANNEL_t channel;
- int closing_wait;
- int close_delay;
int intmask;
int xmit_fifo_room; /* room in xmit fifo */
unsigned char *xmit_buf;
@@ -1148,8 +1144,7 @@
int read_status_mask;
int cps;
- wait_queue_head_t open_wait;
- struct completion close_wait;
+ struct completion close_wait; /* Not yet matching the core */
spinlock_t slock;
struct mutex write_mtx;
};
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index d63f5cc..2978a49 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -327,7 +327,8 @@
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc.receive_buf(tty, sel_buffer + pasted, NULL, count);
+ tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted,
+ NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 2ee4d98..037dc47 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -608,9 +608,9 @@
dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel);
if (channel < CD186x_NCH) {
port = &sx_port[board_No(bp) * SX_NPORT + channel];
- dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%x\n",board_No(bp) * SX_NPORT + channel, port, port->flags & ASYNC_INITIALIZED);
+ dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",board_No(bp) * SX_NPORT + channel, port, port->port.flags & ASYNC_INITIALIZED);
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
func_exit();
return port;
@@ -637,7 +637,7 @@
func_exit();
return;
}
- tty = port->tty;
+ tty = port->port.tty;
status = sx_in(bp, CD186x_RCSR);
@@ -673,7 +673,7 @@
dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
flag = TTY_BREAK;
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RCSR_PE)
@@ -707,7 +707,7 @@
func_exit();
return;
}
- tty = port->tty;
+ tty = port->port.tty;
count = sx_in(bp, CD186x_RDCR);
dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
@@ -734,7 +734,7 @@
return;
}
dprintk (SX_DEBUG_TX, "port: %p\n", port);
- tty = port->tty;
+ tty = port->port.tty;
if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
@@ -811,7 +811,7 @@
if (!(port = sx_get_port(bp, "Modem")))
return;
- tty = port->tty;
+ tty = port->port.tty;
mcr = sx_in(bp, CD186x_MCR);
printk ("mcr = %02x.\n", mcr);
@@ -821,7 +821,7 @@
msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
if (msvr_cd) {
dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
} else {
dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
tty_hangup(tty);
@@ -1030,7 +1030,7 @@
func_enter();
- if (!(tty = port->tty) || !tty->termios) {
+ if (!(tty = port->port.tty) || !tty->termios) {
func_exit();
return;
}
@@ -1052,9 +1052,9 @@
baud = tty_get_baud_rate(tty);
if (baud == 38400) {
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baud = 57600;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baud = 115200;
}
@@ -1244,7 +1244,7 @@
func_enter();
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
func_exit();
return 0;
}
@@ -1268,12 +1268,12 @@
spin_lock_irqsave(&port->lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ if (port->port.tty)
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
sx_change_speed(bp, port);
- port->flags |= ASYNC_INITIALIZED;
+ port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&port->lock, flags);
@@ -1292,7 +1292,7 @@
func_enter();
- if (!(port->flags & ASYNC_INITIALIZED)) {
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
func_exit();
return;
}
@@ -1315,7 +1315,7 @@
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
- if (!(tty = port->tty) || C_HUPCL(tty)) {
+ if (!(tty = port->port.tty) || C_HUPCL(tty)) {
/* Drop DTR */
sx_out(bp, CD186x_MSVDTR, 0);
}
@@ -1330,7 +1330,7 @@
spin_unlock_irqrestore(&bp->lock, flags);
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
- port->flags &= ~ASYNC_INITIALIZED;
+ port->port.flags &= ~ASYNC_INITIALIZED;
if (!bp->count)
sx_shutdown_board(bp);
@@ -1354,9 +1354,9 @@
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY) {
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY) {
func_exit();
return -EAGAIN;
} else {
@@ -1371,7 +1371,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
func_exit();
return 0;
}
@@ -1387,13 +1387,13 @@
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&port->lock, flags);
if (!tty_hung_up_p(filp)) {
- port->count--;
+ port->port.count--;
}
spin_unlock_irqrestore(&port->lock, flags);
- port->blocked_open++;
+ port->port.blocked_open++;
while (1) {
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
@@ -1410,14 +1410,14 @@
spin_unlock_irqrestore(&bp->lock, flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || CD))
break;
if (signal_pending(current)) {
@@ -1428,19 +1428,19 @@
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&port->lock, flags);
if (!tty_hung_up_p(filp)) {
- port->count++;
+ port->port.count++;
}
- port->blocked_open--;
+ port->port.blocked_open--;
spin_unlock_irqrestore(&port->lock, flags);
if (retval) {
func_exit();
return retval;
}
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
func_exit();
return 0;
}
@@ -1484,10 +1484,10 @@
}
spin_lock_irqsave(&bp->lock, flags);
- port->count++;
+ port->port.count++;
bp->count++;
tty->driver_data = port;
- port->tty = tty;
+ port->port.tty = tty;
spin_unlock_irqrestore(&bp->lock, flags);
if ((error = sx_setup_port(bp, port))) {
@@ -1547,15 +1547,15 @@
}
bp = port_Board(port);
- if ((tty->count == 1) && (port->count != 1)) {
+ if ((tty->count == 1) && (port->port.count != 1)) {
printk(KERN_ERR "sx%d: sx_close: bad port count;"
" tty->count is 1, port count is %d\n",
- board_No(bp), port->count);
- port->count = 1;
+ board_No(bp), port->port.count);
+ port->port.count = 1;
}
- if (port->count > 1) {
- port->count--;
+ if (port->port.count > 1) {
+ port->port.count--;
bp->count--;
spin_unlock_irqrestore(&port->lock, flags);
@@ -1563,7 +1563,7 @@
func_exit();
return;
}
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
@@ -1571,8 +1571,8 @@
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
dprintk (SX_DEBUG_OPEN, "Closing\n");
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
- tty_wait_until_sent(tty, port->closing_wait);
+ if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ tty_wait_until_sent(tty, port->port.closing_wait);
}
/*
* At this point we stop accepting input. To do this, we
@@ -1582,7 +1582,7 @@
*/
dprintk (SX_DEBUG_OPEN, "Closed\n");
port->IER &= ~IER_RXD;
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
port->IER &= ~IER_TXRDY;
port->IER |= IER_TXEMPTY;
spin_lock_irqsave(&bp->lock, flags);
@@ -1611,10 +1611,10 @@
board_No(bp), bp->count, tty->index);
bp->count = 0;
}
- if (--port->count < 0) {
+ if (--port->port.count < 0) {
printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
- board_No(bp), port_No(port), port->count);
- port->count = 0;
+ board_No(bp), port_No(port), port->port.count);
+ port->port.count = 0;
}
sx_shutdown_port(bp, port);
@@ -1622,16 +1622,16 @@
tty_ldisc_flush(tty);
spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
- port->tty = NULL;
+ port->port.tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
- if (port->blocked_open) {
- if (port->close_delay) {
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
+ if (port->port.blocked_open) {
+ if (port->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
}
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&port->port.close_wait);
func_exit();
}
@@ -1815,7 +1815,7 @@
dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
port_No(port), status, sx_in (bp, CD186x_CAR));
dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
- if (SX_CRTSCTS(port->tty)) {
+ if (SX_CRTSCTS(port->port.tty)) {
result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_RTS : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
@@ -1857,7 +1857,7 @@
/* if (set & TIOCM_DTR)
port->MSVR |= MSVR_DTR; */
- if (SX_CRTSCTS(port->tty)) {
+ if (SX_CRTSCTS(port->port.tty)) {
if (set & TIOCM_RTS)
port->MSVR |= MSVR_DTR;
} else {
@@ -1869,7 +1869,7 @@
port->MSVR &= ~MSVR_RTS; */
/* if (clear & TIOCM_DTR)
port->MSVR &= ~MSVR_DTR; */
- if (SX_CRTSCTS(port->tty)) {
+ if (SX_CRTSCTS(port->port.tty)) {
if (clear & TIOCM_RTS)
port->MSVR &= ~MSVR_DTR;
} else {
@@ -1929,27 +1929,27 @@
lock_kernel();
- change_speed = ((port->flags & ASYNC_SPD_MASK) !=
+ change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
change_speed |= (tmp.custom_divisor != port->custom_divisor);
if (!capable(CAP_SYS_ADMIN)) {
- if ((tmp.close_delay != port->close_delay) ||
- (tmp.closing_wait != port->closing_wait) ||
+ if ((tmp.close_delay != port->port.close_delay) ||
+ (tmp.closing_wait != port->port.closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK))) {
+ (port->port.flags & ~ASYNC_USR_MASK))) {
func_exit();
unlock_kernel();
return -EPERM;
}
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+ port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
port->custom_divisor = tmp.custom_divisor;
} else {
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
(tmp.flags & ASYNC_FLAGS));
- port->close_delay = tmp.close_delay;
- port->closing_wait = tmp.closing_wait;
+ port->port.close_delay = tmp.close_delay;
+ port->port.closing_wait = tmp.closing_wait;
port->custom_divisor = tmp.custom_divisor;
}
if (change_speed) {
@@ -1975,10 +1975,10 @@
tmp.line = port - sx_port;
tmp.port = bp->base;
tmp.irq = bp->irq;
- tmp.flags = port->flags;
+ tmp.flags = port->port.flags;
tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC;
- tmp.close_delay = port->close_delay * HZ/100;
- tmp.closing_wait = port->closing_wait * HZ/100;
+ tmp.close_delay = port->port.close_delay * HZ/100;
+ tmp.closing_wait = port->port.closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
unlock_kernel();
@@ -2199,17 +2199,17 @@
sx_shutdown_port(bp, port);
spin_lock_irqsave(&port->lock, flags);
- bp->count -= port->count;
+ bp->count -= port->port.count;
if (bp->count < 0) {
printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
board_No(bp), bp->count, tty->index);
bp->count = 0;
}
- port->count = 0;
- port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = NULL;
+ port->port.count = 0;
+ port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->port.tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
func_exit();
}
@@ -2224,10 +2224,6 @@
if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
return;
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_iflag == old_termios->c_iflag)
- return;
-
bp = port_Board(port);
spin_lock_irqsave(&port->lock, flags);
sx_change_speed(port_Board(port), port);
@@ -2297,10 +2293,7 @@
memset(sx_port, 0, sizeof(sx_port));
for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
sx_port[i].magic = SPECIALIX_MAGIC;
- sx_port[i].close_delay = 50 * HZ/100;
- sx_port[i].closing_wait = 3000 * HZ/100;
- init_waitqueue_head(&sx_port[i].open_wait);
- init_waitqueue_head(&sx_port[i].close_wait);
+ tty_port_init(&sx_port[i].port);
spin_lock_init(&sx_port[i].lock);
}
diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h
index 3f2f85b..c630052 100644
--- a/drivers/char/specialix_io8.h
+++ b/drivers/char/specialix_io8.h
@@ -107,23 +107,17 @@
struct specialix_port {
int magic;
+ struct tty_port port;
int baud_base;
int flags;
- struct tty_struct * tty;
- int count;
- int blocked_open;
int timeout;
- int close_delay;
unsigned char * xmit_buf;
int custom_divisor;
int xmit_head;
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
short wakeup_chars;
short break_length;
- unsigned short closing_wait;
unsigned char mark_mask;
unsigned char IER;
unsigned char MSVR;
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index d17be10..0243efb 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -613,17 +613,17 @@
{
unsigned int oldsigs = portp->sigs;
- if (!portp->tty)
+ if (!portp->port.tty)
return;
portp->sigs = stl_getsignals(portp);
if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
- if (portp->flags & ASYNC_CHECK_CD)
- tty_hangup(portp->tty);
+ if (portp->port.flags & ASYNC_CHECK_CD)
+ tty_hangup(portp->port.tty);
}
/*
@@ -734,11 +734,11 @@
* On the first open of the device setup the port hardware, and
* initialize the per port data structure.
*/
- portp->tty = tty;
+ portp->port.tty = tty;
tty->driver_data = portp;
- portp->refcount++;
+ portp->port.count++;
- if ((portp->flags & ASYNC_INITIALIZED) == 0) {
+ if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
if (!portp->tx.buf) {
portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
if (!portp->tx.buf)
@@ -752,7 +752,7 @@
stl_enablerxtx(portp, 1, 1);
stl_startrxtx(portp, 1, 0);
clear_bit(TTY_IO_ERROR, &tty->flags);
- portp->flags |= ASYNC_INITIALIZED;
+ portp->port.flags |= ASYNC_INITIALIZED;
}
/*
@@ -761,9 +761,9 @@
* The sleep here does not need interrupt protection since the wakeup
* for it is done with the same context.
*/
- if (portp->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->close_wait);
- if (portp->flags & ASYNC_HUP_NOTIFY)
+ if (portp->port.flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&portp->port.close_wait);
+ if (portp->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
return -ERESTARTSYS;
}
@@ -777,7 +777,7 @@
if ((rc = stl_waitcarrier(portp, filp)) != 0)
return rc;
- portp->flags |= ASYNC_NORMAL_ACTIVE;
+ portp->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -801,25 +801,25 @@
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->tty->termios->c_cflag & CLOCAL)
+ if (portp->port.tty->termios->c_cflag & CLOCAL)
doclocal++;
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
- portp->refcount--;
+ portp->port.count--;
for (;;) {
/* Takes brd_lock internally */
stl_setsignals(portp, 1, 1);
if (tty_hung_up_p(filp) ||
- ((portp->flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->flags & ASYNC_HUP_NOTIFY)
+ ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
+ if (portp->port.flags & ASYNC_HUP_NOTIFY)
rc = -EBUSY;
else
rc = -ERESTARTSYS;
break;
}
- if (((portp->flags & ASYNC_CLOSING) == 0) &&
+ if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
(doclocal || (portp->sigs & TIOCM_CD)))
break;
if (signal_pending(current)) {
@@ -827,11 +827,11 @@
break;
}
/* FIXME */
- interruptible_sleep_on(&portp->open_wait);
+ interruptible_sleep_on(&portp->port.open_wait);
}
if (! tty_hung_up_p(filp))
- portp->refcount++;
+ portp->port.count++;
portp->openwaitcnt--;
spin_unlock_irqrestore(&stallion_lock, flags);
@@ -904,15 +904,15 @@
spin_unlock_irqrestore(&stallion_lock, flags);
return;
}
- if ((tty->count == 1) && (portp->refcount != 1))
- portp->refcount = 1;
- if (portp->refcount-- > 1) {
+ if ((tty->count == 1) && (portp->port.count != 1))
+ portp->port.count = 1;
+ if (portp->port.count-- > 1) {
spin_unlock_irqrestore(&stallion_lock, flags);
return;
}
- portp->refcount = 0;
- portp->flags |= ASYNC_CLOSING;
+ portp->port.count = 0;
+ portp->port.flags |= ASYNC_CLOSING;
/*
* May want to wait for any data to drain before closing. The BUSY
@@ -930,7 +930,7 @@
spin_lock_irqsave(&stallion_lock, flags);
- portp->flags &= ~ASYNC_INITIALIZED;
+ portp->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&stallion_lock, flags);
stl_disableintrs(portp);
@@ -949,16 +949,16 @@
tty_ldisc_flush(tty);
tty->closing = 0;
- portp->tty = NULL;
+ portp->port.tty = NULL;
if (portp->openwaitcnt) {
if (portp->close_delay)
msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
}
- portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&portp->close_wait);
+ portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&portp->port.close_wait);
}
/*****************************************************************************/
@@ -1153,7 +1153,7 @@
memset(&sio, 0, sizeof(struct serial_struct));
sio.line = portp->portnr;
sio.port = portp->ioaddr;
- sio.flags = portp->flags;
+ sio.flags = portp->port.flags;
sio.baud_base = portp->baud_base;
sio.close_delay = portp->close_delay;
sio.closing_wait = portp->closing_wait;
@@ -1194,17 +1194,17 @@
if ((sio.baud_base != portp->baud_base) ||
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->flags & ~ASYNC_USR_MASK)))
+ (portp->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
}
- portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
+ portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
portp->baud_base = sio.baud_base;
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- stl_setport(portp, portp->tty->termios);
+ stl_setport(portp, portp->port.tty->termios);
return 0;
}
@@ -1353,7 +1353,7 @@
stl_start(tty);
}
if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
- wake_up_interruptible(&portp->open_wait);
+ wake_up_interruptible(&portp->port.open_wait);
}
/*****************************************************************************/
@@ -1438,7 +1438,7 @@
if (portp == NULL)
return;
- portp->flags &= ~ASYNC_INITIALIZED;
+ portp->port.flags &= ~ASYNC_INITIALIZED;
stl_disableintrs(portp);
if (tty->termios->c_cflag & HUPCL)
stl_setsignals(portp, 0, 0);
@@ -1452,10 +1452,10 @@
portp->tx.head = NULL;
portp->tx.tail = NULL;
}
- portp->tty = NULL;
- portp->flags &= ~ASYNC_NORMAL_ACTIVE;
- portp->refcount = 0;
- wake_up_interruptible(&portp->open_wait);
+ portp->port.tty = NULL;
+ portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ portp->port.count = 0;
+ wake_up_interruptible(&portp->port.open_wait);
}
/*****************************************************************************/
@@ -1814,8 +1814,8 @@
portp->baud_base = STL_BAUDBASE;
portp->close_delay = STL_CLOSEDELAY;
portp->closing_wait = 30 * HZ;
- init_waitqueue_head(&portp->open_wait);
- init_waitqueue_head(&portp->close_wait);
+ init_waitqueue_head(&portp->port.open_wait);
+ init_waitqueue_head(&portp->port.close_wait);
portp->stats.brd = portp->brdnr;
portp->stats.panel = portp->panelnr;
portp->stats.port = portp->portnr;
@@ -1840,8 +1840,8 @@
portp = panelp->ports[k];
if (portp == NULL)
continue;
- if (portp->tty != NULL)
- stl_hangup(portp->tty);
+ if (portp->port.tty != NULL)
+ stl_hangup(portp->port.tty);
kfree(portp->tx.buf);
kfree(portp);
}
@@ -2513,7 +2513,7 @@
}
portp->stats.state = portp->istate;
- portp->stats.flags = portp->flags;
+ portp->stats.flags = portp->port.flags;
portp->stats.hwid = portp->hwid;
portp->stats.ttystate = 0;
@@ -2524,16 +2524,16 @@
portp->stats.rxbuffered = 0;
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->tty != NULL)
- if (portp->tty->driver_data == portp) {
- portp->stats.ttystate = portp->tty->flags;
+ if (portp->port.tty != NULL)
+ if (portp->port.tty->driver_data == portp) {
+ portp->stats.ttystate = portp->port.tty->flags;
/* No longer available as a statistic */
- portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */
- if (portp->tty->termios != NULL) {
- portp->stats.cflags = portp->tty->termios->c_cflag;
- portp->stats.iflags = portp->tty->termios->c_iflag;
- portp->stats.oflags = portp->tty->termios->c_oflag;
- portp->stats.lflags = portp->tty->termios->c_lflag;
+ portp->stats.rxbuffered = 1; /*portp->port.tty->flip.count; */
+ if (portp->port.tty->termios != NULL) {
+ portp->stats.cflags = portp->port.tty->termios->c_cflag;
+ portp->stats.iflags = portp->port.tty->termios->c_iflag;
+ portp->stats.oflags = portp->port.tty->termios->c_oflag;
+ portp->stats.lflags = portp->port.tty->termios->c_lflag;
}
}
spin_unlock_irqrestore(&stallion_lock, flags);
@@ -2939,15 +2939,15 @@
}
baudrate = stl_baudrates[baudrate];
if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baudrate = 57600;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baudrate = 115200;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baudrate = 230400;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
baudrate = 460800;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
baudrate = (portp->baud_base / portp->custom_divisor);
}
if (baudrate > STL_CD1400MAXBAUD)
@@ -2969,9 +2969,9 @@
mcor1 |= MCOR1_DCD;
mcor2 |= MCOR2_DCD;
sreron |= SRER_MODEM;
- portp->flags |= ASYNC_CHECK_CD;
+ portp->port.flags |= ASYNC_CHECK_CD;
} else
- portp->flags &= ~ASYNC_CHECK_CD;
+ portp->port.flags &= ~ASYNC_CHECK_CD;
/*
* Setup cd1400 enhanced modes if we can. In particular we want to
@@ -3242,7 +3242,7 @@
if (portp == NULL)
return;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return;
@@ -3304,7 +3304,7 @@
if (portp == NULL)
return;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return;
@@ -3503,8 +3503,8 @@
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->tty)
- tty_wakeup(portp->tty);
+ if (portp->port.tty)
+ tty_wakeup(portp->port.tty);
}
if (len == 0) {
@@ -3568,7 +3568,7 @@
return;
}
portp = panelp->ports[(ioack >> 3)];
- tty = portp->tty;
+ tty = portp->port.tty;
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
@@ -3613,7 +3613,7 @@
if (portp->rxmarkmsk & status) {
if (status & ST_BREAK) {
status = TTY_BREAK;
- if (portp->flags & ASYNC_SAK) {
+ if (portp->port.flags & ASYNC_SAK) {
do_SAK(tty);
BRDENABLE(portp->brdnr, portp->pagenr);
}
@@ -3899,15 +3899,15 @@
}
baudrate = stl_baudrates[baudrate];
if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baudrate = 57600;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baudrate = 115200;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baudrate = 230400;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
baudrate = 460800;
- else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+ else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
baudrate = (portp->baud_base / portp->custom_divisor);
}
if (baudrate > STL_SC26198MAXBAUD)
@@ -3922,11 +3922,11 @@
* Check what form of modem signaling is required and set it up.
*/
if (tiosp->c_cflag & CLOCAL) {
- portp->flags &= ~ASYNC_CHECK_CD;
+ portp->port.flags &= ~ASYNC_CHECK_CD;
} else {
iopr |= IOPR_DCDCOS;
imron |= IR_IOPORT;
- portp->flags |= ASYNC_CHECK_CD;
+ portp->port.flags |= ASYNC_CHECK_CD;
}
/*
@@ -4174,7 +4174,7 @@
if (portp == NULL)
return;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return;
@@ -4243,7 +4243,7 @@
if (portp == NULL)
return;
- tty = portp->tty;
+ tty = portp->port.tty;
if (tty == NULL)
return;
@@ -4421,8 +4421,8 @@
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->tty)
- tty_wakeup(portp->tty);
+ if (portp->port.tty)
+ tty_wakeup(portp->port.tty);
}
if (len == 0) {
@@ -4475,7 +4475,7 @@
pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
- tty = portp->tty;
+ tty = portp->port.tty;
ioaddr = portp->ioaddr;
outb(GIBCR, (ioaddr + XP_ADDR));
len = inb(ioaddr + XP_DATA) + 1;
@@ -4527,7 +4527,7 @@
struct tty_struct *tty;
unsigned int ioaddr;
- tty = portp->tty;
+ tty = portp->port.tty;
ioaddr = portp->ioaddr;
if (status & SR_RXPARITY)
@@ -4544,7 +4544,7 @@
if (portp->rxmarkmsk & status) {
if (status & SR_RXBREAK) {
status = TTY_BREAK;
- if (portp->flags & ASYNC_SAK) {
+ if (portp->port.flags & ASYNC_SAK) {
do_SAK(tty);
BRDENABLE(portp->brdnr, portp->pagenr);
}
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index b1a7a8c..d5cffcd 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1,4 +1,3 @@
-
/* sx.c -- driver for the Specialix SX series cards.
*
* This driver will also support the older SI, and XIO cards.
@@ -930,7 +929,7 @@
func_enter2();
- if (!port->gs.tty)
+ if (!port->gs.port.tty)
return 0;
/* What is this doing here? -- REW
@@ -941,19 +940,19 @@
sx_set_baud(port);
-#define CFLAG port->gs.tty->termios->c_cflag
+#define CFLAG port->gs.port.tty->termios->c_cflag
sx_write_channel_byte(port, hi_mr1,
- (C_PARENB(port->gs.tty) ? MR1_WITH : MR1_NONE) |
- (C_PARODD(port->gs.tty) ? MR1_ODD : MR1_EVEN) |
- (C_CRTSCTS(port->gs.tty) ? MR1_RTS_RXFLOW : 0) |
+ (C_PARENB(port->gs.port.tty) ? MR1_WITH : MR1_NONE) |
+ (C_PARODD(port->gs.port.tty) ? MR1_ODD : MR1_EVEN) |
+ (C_CRTSCTS(port->gs.port.tty) ? MR1_RTS_RXFLOW : 0) |
(((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) |
(((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) |
(((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) |
(((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0));
sx_write_channel_byte(port, hi_mr2,
- (C_CRTSCTS(port->gs.tty) ? MR2_CTS_TXFLOW : 0) |
- (C_CSTOPB(port->gs.tty) ? MR2_2_STOP :
+ (C_CRTSCTS(port->gs.port.tty) ? MR2_CTS_TXFLOW : 0) |
+ (C_CSTOPB(port->gs.port.tty) ? MR2_2_STOP :
MR2_1_STOP));
switch (CFLAG & CSIZE) {
@@ -976,44 +975,44 @@
}
sx_write_channel_byte(port, hi_prtcl,
- (I_IXON(port->gs.tty) ? SP_TXEN : 0) |
- (I_IXOFF(port->gs.tty) ? SP_RXEN : 0) |
- (I_IXANY(port->gs.tty) ? SP_TANY : 0) | SP_DCEN);
+ (I_IXON(port->gs.port.tty) ? SP_TXEN : 0) |
+ (I_IXOFF(port->gs.port.tty) ? SP_RXEN : 0) |
+ (I_IXANY(port->gs.port.tty) ? SP_TANY : 0) | SP_DCEN);
sx_write_channel_byte(port, hi_break,
- (I_IGNBRK(port->gs.tty) ? BR_IGN : 0 |
- I_BRKINT(port->gs.tty) ? BR_INT : 0));
+ (I_IGNBRK(port->gs.port.tty) ? BR_IGN : 0 |
+ I_BRKINT(port->gs.port.tty) ? BR_INT : 0));
- sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.tty));
- sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.tty));
- sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.tty));
- sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.tty));
+ sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.port.tty));
+ sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.port.tty));
+ sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.port.tty));
+ sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.port.tty));
sx_reconfigure_port(port);
/* Tell line discipline whether we will do input cooking */
- if (I_OTHER(port->gs.tty)) {
- clear_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
+ if (I_OTHER(port->gs.port.tty)) {
+ clear_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags);
} else {
- set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
+ set_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags);
}
sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
- (unsigned int)port->gs.tty->termios->c_iflag,
- I_OTHER(port->gs.tty));
+ (unsigned int)port->gs.port.tty->termios->c_iflag,
+ I_OTHER(port->gs.port.tty));
/* Tell line discipline whether we will do output cooking.
* If OPOST is set and no other output flags are set then we can do output
* processing. Even if only *one* other flag in the O_OTHER group is set
* we do cooking in software.
*/
- if (O_OPOST(port->gs.tty) && !O_OTHER(port->gs.tty)) {
- set_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
+ if (O_OPOST(port->gs.port.tty) && !O_OTHER(port->gs.port.tty)) {
+ set_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags);
} else {
- clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
+ clear_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags);
}
sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
- (unsigned int)port->gs.tty->termios->c_oflag,
- O_OTHER(port->gs.tty));
+ (unsigned int)port->gs.port.tty->termios->c_oflag,
+ O_OTHER(port->gs.port.tty));
/* port->c_dcd = sx_get_CD (port); */
func_exit();
return 0;
@@ -1102,8 +1101,8 @@
sx_disable_tx_interrupts(port);
}
- if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
- tty_wakeup(port->gs.tty);
+ if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
+ tty_wakeup(port->gs.port.tty);
sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
port->gs.wakeup_chars);
}
@@ -1126,7 +1125,7 @@
unsigned char *rp;
func_enter2();
- tty = port->gs.tty;
+ tty = port->gs.port.tty;
while (1) {
rx_op = sx_read_channel_byte(port, hi_rxopos);
c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff;
@@ -1211,12 +1210,12 @@
/* DCD went UP */
if ((sx_read_channel_byte(port, hi_hstat) !=
HS_IDLE_CLOSED) &&
- !(port->gs.tty->termios->
+ !(port->gs.port.tty->termios->
c_cflag & CLOCAL)) {
/* Are we blocking in open? */
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
"active, unblocking open\n");
- wake_up_interruptible(&port->gs.
+ wake_up_interruptible(&port->gs.port.
open_wait);
} else {
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
@@ -1224,10 +1223,10 @@
}
} else {
/* DCD went down! */
- if (!(port->gs.tty->termios->c_cflag & CLOCAL)){
+ if (!(port->gs.port.tty->termios->c_cflag & CLOCAL)){
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
"dropped. hanging up....\n");
- tty_hangup(port->gs.tty);
+ tty_hangup(port->gs.port.tty);
} else {
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
"dropped. ignoring.\n");
@@ -1325,7 +1324,7 @@
for (i = 0; i < board->nports; i++) {
port = &board->ports[i];
- if (port->gs.flags & GS_ACTIVE) {
+ if (port->gs.port.flags & GS_ACTIVE) {
if (sx_read_channel_byte(port, hi_state)) {
sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: "
"modem signal change?... \n",i);
@@ -1334,7 +1333,7 @@
if (port->gs.xmit_cnt) {
sx_transmit_chars(port);
}
- if (!(port->gs.flags & SX_RX_THROTTLE)) {
+ if (!(port->gs.port.flags & SX_RX_THROTTLE)) {
sx_receive_chars(port);
}
}
@@ -1373,7 +1372,7 @@
struct sx_port *port = ptr;
func_enter2();
- port->gs.flags &= ~GS_TX_INTEN;
+ port->gs.port.flags &= ~GS_TX_INTEN;
func_exit();
}
@@ -1394,7 +1393,7 @@
/* XXX Must be "HIGH_WATER" for SI card according to doc. */
if (data_in_buffer < LOW_WATER)
- port->gs.flags &= ~GS_TX_INTEN;
+ port->gs.port.flags &= ~GS_TX_INTEN;
func_exit();
}
@@ -1442,8 +1441,8 @@
func_enter();
- port->gs.flags &= ~GS_ACTIVE;
- if (port->gs.tty && (port->gs.tty->termios->c_cflag & HUPCL)) {
+ port->gs.port.flags &= ~GS_ACTIVE;
+ if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
sx_setsignals(port, 0, 0);
sx_reconfigure_port(port);
}
@@ -1485,8 +1484,8 @@
spin_lock_irqsave(&port->gs.driver_lock, flags);
tty->driver_data = port;
- port->gs.tty = tty;
- port->gs.count++;
+ port->gs.port.tty = tty;
+ port->gs.port.count++;
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
sx_dprintk(SX_DEBUG_OPEN, "starting port\n");
@@ -1497,12 +1496,12 @@
retval = gs_init_port(&port->gs);
sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n");
if (retval) {
- port->gs.count--;
+ port->gs.port.count--;
return retval;
}
- port->gs.flags |= GS_ACTIVE;
- if (port->gs.count <= 1)
+ port->gs.port.flags |= GS_ACTIVE;
+ if (port->gs.port.count <= 1)
sx_setsignals(port, 1, 1);
#if 0
@@ -1513,12 +1512,12 @@
my_hd_io(port->board->base + port->ch_base, sizeof(*port));
#endif
- if (port->gs.count <= 1) {
+ if (port->gs.port.count <= 1) {
if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
printk(KERN_ERR "sx: Card didn't respond to LOPEN "
"command.\n");
spin_lock_irqsave(&port->gs.driver_lock, flags);
- port->gs.count--;
+ port->gs.port.count--;
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
return -EIO;
}
@@ -1526,11 +1525,11 @@
retval = gs_block_til_ready(port, filp);
sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n",
- retval, port->gs.count);
+ retval, port->gs.port.count);
if (retval) {
/*
- * Don't lower gs.count here because sx_close() will be called later
+ * Don't lower gs.port.count here because sx_close() will be called later
*/
return retval;
@@ -1571,14 +1570,14 @@
}
sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n",
- 5 * HZ - to - 1, port->gs.count);
+ 5 * HZ - to - 1, port->gs.port.count);
- if (port->gs.count) {
+ if (port->gs.port.count) {
sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n",
- port->gs.count);
+ port->gs.port.count);
/*printk("%s SETTING port count to zero: %p count: %d\n",
- __func__, port, port->gs.count);
- port->gs.count = 0;*/
+ __func__, port, port->gs.port.count);
+ port->gs.port.count = 0;*/
}
func_exit();
@@ -1939,7 +1938,7 @@
* control then throttle the port.
*/
if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) {
- port->gs.flags |= SX_RX_THROTTLE;
+ port->gs.port.flags |= SX_RX_THROTTLE;
}
func_exit();
}
@@ -1953,7 +1952,7 @@
* this port in case we disabled flow control while the port
* was throttled
*/
- port->gs.flags &= ~SX_RX_THROTTLE;
+ port->gs.port.flags &= ~SX_RX_THROTTLE;
func_exit();
return;
}
@@ -2396,6 +2395,7 @@
board->ports = port;
for (j = 0; j < boards[i].nports; j++) {
sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j);
+ tty_port_init(&port->gs.port);
port->gs.magic = SX_MAGIC;
port->gs.close_delay = HZ / 2;
port->gs.closing_wait = 30 * HZ;
@@ -2408,9 +2408,6 @@
/*
* Initializing wait queue
*/
- init_waitqueue_head(&port->gs.open_wait);
- init_waitqueue_head(&port->gs.close_wait);
-
port++;
}
}
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ac5080d..9f14753 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -180,19 +180,14 @@
struct mgsl_struct {
int magic;
- int flags;
- int count; /* count of opens */
+ struct tty_port port;
int line;
int hw_version;
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
struct mgsl_icount icount;
- struct tty_struct *tty;
int timeout;
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
u16 read_status_mask;
u16 ignore_status_mask;
unsigned char *xmit_buf;
@@ -200,9 +195,6 @@
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
@@ -975,8 +967,8 @@
return;
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->receive_buf)
- ld->receive_buf(tty, data, flags, count);
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
@@ -1134,7 +1126,7 @@
static void mgsl_bh_transmit(struct mgsl_struct *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned long flags;
if ( debug_level >= DEBUG_LEVEL_BH )
@@ -1276,7 +1268,7 @@
else
#endif
{
- if (info->tty->stopped || info->tty->hw_stopped) {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
@@ -1357,29 +1349,29 @@
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if ( (info->flags & ASYNC_CHECK_CD) &&
+ if ( (info->port.flags & ASYNC_CHECK_CD) &&
(status & MISCSTATUS_DCD_LATCHED) ) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s CD now %s...", info->device_name,
(status & MISCSTATUS_DCD) ? "on" : "off");
if (status & MISCSTATUS_DCD)
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
else {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("doing serial hangup...");
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
}
}
- if ( (info->flags & ASYNC_CTS_FLOW) &&
+ if ( (info->port.flags & ASYNC_CTS_FLOW) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
- if (info->tty->hw_stopped) {
+ if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx start...");
- if (info->tty)
- info->tty->hw_stopped = 0;
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 0;
usc_start_transmitter(info);
info->pending_bh |= BH_TRANSMIT;
return;
@@ -1388,8 +1380,8 @@
if (!(status & MISCSTATUS_CTS)) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx stop...");
- if (info->tty)
- info->tty->hw_stopped = 1;
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 1;
usc_stop_transmitter(info);
}
}
@@ -1423,7 +1415,7 @@
usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
- if (info->tty->stopped || info->tty->hw_stopped) {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
@@ -1453,7 +1445,7 @@
u16 status;
int work = 0;
unsigned char DataByte;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -1514,7 +1506,7 @@
if (status & RXSTATUS_BREAK_RECEIVED) {
flag = TTY_BREAK;
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RXSTATUS_PARITY_ERROR)
flag = TTY_PARITY;
@@ -1771,7 +1763,7 @@
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
if (!info->xmit_buf) {
@@ -1798,8 +1790,8 @@
retval = mgsl_adapter_test(info);
if ( retval ) {
- if (capable(CAP_SYS_ADMIN) && info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (capable(CAP_SYS_ADMIN) && info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
mgsl_release_resources(info);
return retval;
}
@@ -1807,10 +1799,10 @@
/* program hardware for current parameters */
mgsl_change_params(info);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
return 0;
@@ -1827,7 +1819,7 @@
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1864,7 +1856,7 @@
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
- if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
usc_set_serial_signals(info);
}
@@ -1873,10 +1865,10 @@
mgsl_release_resources(info);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
} /* end of shutdown() */
@@ -1908,7 +1900,7 @@
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
- if (info->netcount || info->tty->termios->c_cflag & CREAD)
+ if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
usc_start_receiver(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -1921,14 +1913,14 @@
unsigned cflag;
int bits_per_char;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -1976,7 +1968,7 @@
* current data rate.
*/
if (info->params.data_rate <= 460800)
- info->params.data_rate = tty_get_baud_rate(info->tty);
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
if ( info->params.data_rate ) {
info->timeout = (32*HZ*bits_per_char) /
@@ -1985,31 +1977,31 @@
info->timeout += HZ/50; /* Add .02 seconds of slop */
if (cflag & CRTSCTS)
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/* process tty input control flags */
info->read_status_mask = RXSTATUS_OVERRUN;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
/* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_OVERRUN;
}
@@ -3113,32 +3105,32 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
- __FILE__,__LINE__, info->device_name, info->count);
+ __FILE__,__LINE__, info->device_name, info->port.count);
- if (!info->count)
+ if (!info->port.count)
return;
if (tty_hung_up_p(filp))
goto cleanup;
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* tty->count is 1 and the tty structure will be freed.
- * info->count should be one in this case.
+ * info->port.count should be one in this case.
* if it's not, correct it so that the port is shutdown.
*/
printk("mgsl_close: bad refcount; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
+ "info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
- info->count--;
+ info->port.count--;
/* if at least one open remaining, leave hardware active */
- if (info->count)
+ if (info->port.count)
goto cleanup;
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
/* set tty->closing to notify line discipline to
* only process XON/XOFF characters. Only the N_TTY
@@ -3148,14 +3140,14 @@
/* wait for transmit data to clear all layers */
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n",
__FILE__,__LINE__, info->device_name );
- tty_wait_until_sent(tty, info->closing_wait);
+ tty_wait_until_sent(tty, info->port.closing_wait);
}
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
mgsl_wait_until_sent(tty, info->timeout);
mgsl_flush_buffer(tty);
@@ -3165,23 +3157,23 @@
shutdown(info);
tty->closing = 0;
- info->tty = NULL;
+ info->port.tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ if (info->port.blocked_open) {
+ if (info->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->port.close_wait);
cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
- tty->driver->name, info->count);
+ tty->driver->name, info->port.count);
} /* end of mgsl_close() */
@@ -3211,7 +3203,7 @@
if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
return;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
goto exit;
orig_jiffies = jiffies;
@@ -3283,11 +3275,11 @@
mgsl_flush_buffer(tty);
shutdown(info);
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
} /* end of mgsl_hangup() */
@@ -3319,7 +3311,7 @@
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3328,25 +3320,25 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready before block on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
spin_lock_irqsave(&info->irq_spinlock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->count--;
+ info->port.count--;
}
spin_unlock_irqrestore(&info->irq_spinlock, flags);
- info->blocked_open++;
+ info->port.blocked_open++;
while (1) {
if (tty->termios->c_cflag & CBAUD) {
@@ -3358,8 +3350,8 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
- retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+ retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
@@ -3368,7 +3360,7 @@
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(info->port.flags & ASYNC_CLOSING) &&
(do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
break;
}
@@ -3380,24 +3372,24 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (extra_count)
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
if (!retval)
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return retval;
@@ -3435,22 +3427,22 @@
return -ENODEV;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
- __FILE__,__LINE__,tty->driver->name, info->count);
+ __FILE__,__LINE__,tty->driver->name, info->port.count);
/* If port is closing, signal caller to try again */
- if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
goto cleanup;
}
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
@@ -3458,10 +3450,10 @@
spin_unlock_irqrestore(&info->netlock, flags);
goto cleanup;
}
- info->count++;
+ info->port.count++;
spin_unlock_irqrestore(&info->netlock, flags);
- if (info->count == 1) {
+ if (info->port.count == 1) {
/* 1st open on this device, init hardware */
retval = startup(info);
if (retval < 0)
@@ -3484,9 +3476,9 @@
cleanup:
if (retval) {
if (tty->count == 1)
- info->tty = NULL; /* tty layer will release tty struct */
- if(info->count)
- info->count--;
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
}
return retval;
@@ -4332,13 +4324,12 @@
if (!info) {
printk("Error can't allocate device instance data\n");
} else {
+ tty_port_init(&info->port);
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, mgsl_bh_handler);
info->max_frame_size = 4096;
- info->close_delay = 5*HZ/10;
- info->closing_wait = 30*HZ;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
init_waitqueue_head(&info->status_event_wait_q);
init_waitqueue_head(&info->event_wait_q);
spin_lock_init(&info->irq_spinlock);
@@ -6575,7 +6566,7 @@
unsigned int framesize = 0;
bool ReturnCode = false;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
bool return_frame = false;
/*
@@ -6774,7 +6765,7 @@
unsigned int framesize = 0;
bool ReturnCode = false;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
/*
* current_rx_buffer points to the 1st buffer of the next available
@@ -7711,7 +7702,7 @@
unsigned short new_crctype;
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
switch (encoding)
@@ -7808,7 +7799,7 @@
/* arbitrate between network and tty opens */
spin_lock_irqsave(&info->netlock, flags);
- if (info->count != 0 || info->netcount != 0) {
+ if (info->port.count != 0 || info->netcount != 0) {
printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
spin_unlock_irqrestore(&info->netlock, flags);
return -EBUSY;
@@ -7894,7 +7885,7 @@
printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
if (cmd != SIOCWANDEV)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 55c1653..07aa42a 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -244,11 +244,11 @@
*/
struct slgt_info {
void *if_ptr; /* General purpose pointer (used by SPPP) */
+ struct tty_port port;
struct slgt_info *next_device; /* device list link */
int magic;
- int flags;
char device_name[25];
struct pci_dev *pdev;
@@ -260,23 +260,15 @@
/* array of pointers to port contexts on this adapter */
struct slgt_info *port_array[SLGT_MAX_PORTS];
- int count; /* count of opens */
int line; /* tty line instance number */
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
struct mgsl_icount icount;
- struct tty_struct *tty;
int timeout;
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
unsigned int read_status_mask;
unsigned int ignore_status_mask;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer;
@@ -641,8 +633,8 @@
return;
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->receive_buf)
- ld->receive_buf(tty, data, flags, count);
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
@@ -672,20 +664,20 @@
}
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
- DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
+ DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
/* If port is closing, signal caller to try again */
- if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
goto cleanup;
}
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
@@ -693,10 +685,10 @@
spin_unlock_irqrestore(&info->netlock, flags);
goto cleanup;
}
- info->count++;
+ info->port.count++;
spin_unlock_irqrestore(&info->netlock, flags);
- if (info->count == 1) {
+ if (info->port.count == 1) {
/* 1st open on this device, init hardware */
retval = startup(info);
if (retval < 0)
@@ -714,9 +706,9 @@
cleanup:
if (retval) {
if (tty->count == 1)
- info->tty = NULL; /* tty layer will release tty struct */
- if(info->count)
- info->count--;
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
}
DBGINFO(("%s open rc=%d\n", info->device_name, retval));
@@ -729,32 +721,32 @@
if (sanity_check(info, tty->name, "close"))
return;
- DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
+ DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
- if (!info->count)
+ if (!info->port.count)
return;
if (tty_hung_up_p(filp))
goto cleanup;
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* tty->count is 1 and the tty structure will be freed.
- * info->count should be one in this case.
+ * info->port.count should be one in this case.
* if it's not, correct it so that the port is shutdown.
*/
DBGERR(("%s close: bad refcount; tty->count=1, "
- "info->count=%d\n", info->device_name, info->count));
- info->count = 1;
+ "info->port.count=%d\n", info->device_name, info->port.count));
+ info->port.count = 1;
}
- info->count--;
+ info->port.count--;
/* if at least one open remaining, leave hardware active */
- if (info->count)
+ if (info->port.count)
goto cleanup;
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
/* set tty->closing to notify line discipline to
* only process XON/XOFF characters. Only the N_TTY
@@ -764,12 +756,12 @@
/* wait for transmit data to clear all layers */
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
- tty_wait_until_sent(tty, info->closing_wait);
+ tty_wait_until_sent(tty, info->port.closing_wait);
}
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
@@ -777,21 +769,21 @@
shutdown(info);
tty->closing = 0;
- info->tty = NULL;
+ info->port.tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ if (info->port.blocked_open) {
+ if (info->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->port.close_wait);
cleanup:
- DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
+ DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
}
static void hangup(struct tty_struct *tty)
@@ -805,11 +797,11 @@
flush_buffer(tty);
shutdown(info);
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
@@ -959,7 +951,7 @@
if (sanity_check(info, tty->name, "wait_until_sent"))
return;
DBGINFO(("%s wait_until_sent entry\n", info->device_name));
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
goto exit;
orig_jiffies = jiffies;
@@ -1500,7 +1492,7 @@
unsigned short new_crctype;
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
DBGINFO(("%s hdlcdev_attach\n", info->device_name));
@@ -1600,7 +1592,7 @@
/* arbitrate between network and tty opens */
spin_lock_irqsave(&info->netlock, flags);
- if (info->count != 0 || info->netcount != 0) {
+ if (info->port.count != 0 || info->netcount != 0) {
DBGINFO(("%s hdlc_open busy\n", dev->name));
spin_unlock_irqrestore(&info->netlock, flags);
return -EBUSY;
@@ -1685,7 +1677,7 @@
DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
if (cmd != SIOCWANDEV)
@@ -1906,7 +1898,7 @@
*/
static void rx_async(struct slgt_info *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
unsigned int start, end;
unsigned char *p;
@@ -2057,7 +2049,7 @@
static void bh_transmit(struct slgt_info *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
DBGBH(("%s bh_transmit\n", info->device_name));
if (tty)
@@ -2103,17 +2095,17 @@
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
- if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty) {
- if (info->tty->hw_stopped) {
+ if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (info->port.tty) {
+ if (info->port.tty->hw_stopped) {
if (info->signals & SerialSignal_CTS) {
- info->tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
info->pending_bh |= BH_TRANSMIT;
return;
}
} else {
if (!(info->signals & SerialSignal_CTS))
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
}
}
}
@@ -2146,12 +2138,12 @@
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
- if (info->flags & ASYNC_CHECK_CD) {
+ if (info->port.flags & ASYNC_CHECK_CD) {
if (info->signals & SerialSignal_DCD)
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
else {
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
}
}
}
@@ -2194,12 +2186,12 @@
if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
info->icount.brk++;
/* process break detection if tty control allows */
- if (info->tty) {
+ if (info->port.tty) {
if (!(status & info->ignore_status_mask)) {
if (info->read_status_mask & MASK_BREAK) {
- tty_insert_flip_char(info->tty, 0, TTY_BREAK);
- if (info->flags & ASYNC_SAK)
- do_SAK(info->tty);
+ tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
+ if (info->port.flags & ASYNC_SAK)
+ do_SAK(info->port.tty);
}
}
}
@@ -2319,7 +2311,7 @@
else
#endif
{
- if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+ if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
tx_stop(info);
return;
}
@@ -2395,7 +2387,7 @@
for(i=0; i < info->port_count ; i++) {
struct slgt_info *port = info->port_array[i];
- if (port && (port->count || port->netcount) &&
+ if (port && (port->port.count || port->netcount) &&
port->pending_bh && !port->bh_running &&
!port->bh_requested) {
DBGISR(("%s bh queued\n", port->device_name));
@@ -2414,7 +2406,7 @@
{
DBGINFO(("%s startup\n", info->device_name));
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
if (!info->tx_buf) {
@@ -2432,10 +2424,10 @@
/* program hardware for current parameters */
change_params(info);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
return 0;
}
@@ -2447,7 +2439,7 @@
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
DBGINFO(("%s shutdown\n", info->device_name));
@@ -2470,7 +2462,7 @@
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
- if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
@@ -2479,10 +2471,10 @@
spin_unlock_irqrestore(&info->lock,flags);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
}
static void program_hw(struct slgt_info *info)
@@ -2511,7 +2503,7 @@
get_signals(info);
if (info->netcount ||
- (info->tty && info->tty->termios->c_cflag & CREAD))
+ (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -2525,11 +2517,11 @@
unsigned cflag;
int bits_per_char;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
DBGINFO(("%s change_params\n", info->device_name));
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -2561,7 +2553,7 @@
bits_per_char = info->params.data_bits +
info->params.stop_bits + 1;
- info->params.data_rate = tty_get_baud_rate(info->tty);
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
if (info->params.data_rate) {
info->timeout = (32*HZ*bits_per_char) /
@@ -2570,30 +2562,30 @@
info->timeout += HZ/50; /* Add .02 seconds of slop */
if (cflag & CRTSCTS)
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/* process tty input control flags */
info->read_status_mask = IRQ_RXOVER;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= MASK_BREAK;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= MASK_BREAK;
/* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= MASK_OVERRUN;
}
@@ -3144,7 +3136,7 @@
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3153,21 +3145,21 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->count--;
+ info->port.count--;
}
spin_unlock_irqrestore(&info->lock, flags);
- info->blocked_open++;
+ info->port.blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
@@ -3179,8 +3171,8 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
- retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+ retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
@@ -3189,7 +3181,7 @@
get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(info->port.flags & ASYNC_CLOSING) &&
(do_clocal || (info->signals & SerialSignal_DCD)) ) {
break;
}
@@ -3204,14 +3196,14 @@
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (extra_count)
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
if (!retval)
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
return retval;
@@ -3454,14 +3446,13 @@
DBGERR(("%s device alloc failed adapter=%d port=%d\n",
driver_name, adapter_num, port_num));
} else {
+ tty_port_init(&info->port);
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
info->raw_rx_size = DMABUFSIZE;
- info->close_delay = 5*HZ/10;
- info->closing_wait = 30*HZ;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
init_waitqueue_head(&info->status_event_wait_q);
init_waitqueue_head(&info->event_wait_q);
spin_lock_init(&info->netlock);
@@ -4505,7 +4496,7 @@
unsigned short status;
unsigned int framesize = 0;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned char addr_field = 0xff;
unsigned int crc_size = 0;
@@ -4656,7 +4647,7 @@
DBGDATA(info, info->rbufs[i].buf, count, "rx");
DBGINFO(("rx_get_buf size=%d\n", count));
if (count)
- ldisc_receive_buf(info->tty, info->rbufs[i].buf,
+ ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
info->flag_buf, count);
free_rbufs(info, i, i);
return true;
@@ -4765,11 +4756,11 @@
{
unsigned long timeout;
unsigned long flags;
- struct tty_struct *oldtty = info->tty;
+ struct tty_struct *oldtty = info->port.tty;
u32 speed = info->params.data_rate;
info->params.data_rate = 921600;
- info->tty = NULL;
+ info->port.tty = NULL;
spin_lock_irqsave(&info->lock, flags);
async_mode(info);
@@ -4797,7 +4788,7 @@
spin_unlock_irqrestore(&info->lock,flags);
info->params.data_rate = speed;
- info->tty = oldtty;
+ info->port.tty = oldtty;
info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
return info->irq_occurred ? 0 : -ENODEV;
@@ -4837,7 +4828,7 @@
int rc = -ENODEV;
unsigned long flags;
- struct tty_struct *oldtty = info->tty;
+ struct tty_struct *oldtty = info->port.tty;
MGSL_PARAMS params;
memcpy(¶ms, &info->params, sizeof(params));
@@ -4845,7 +4836,7 @@
info->params.mode = MGSL_MODE_ASYNC;
info->params.data_rate = 921600;
info->params.loopback = 1;
- info->tty = NULL;
+ info->port.tty = NULL;
/* build and send transmit frame */
for (count = 0; count < TESTFRAMESIZE; ++count)
@@ -4883,7 +4874,7 @@
spin_unlock_irqrestore(&info->lock,flags);
memcpy(&info->params, ¶ms, sizeof(info->params));
- info->tty = oldtty;
+ info->port.tty = oldtty;
info->init_error = rc ? DiagStatus_DmaFailure : 0;
return rc;
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index bec54866..c4bc090 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -151,18 +151,15 @@
typedef struct _synclinkmp_info {
void *if_ptr; /* General purpose pointer (used by SPPP) */
int magic;
- int flags;
- int count; /* count of opens */
+ struct tty_port port;
int line;
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */
struct mgsl_icount icount;
- struct tty_struct *tty;
int timeout;
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
u16 read_status_mask1; /* break detection (SR1 indications) */
u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
@@ -172,9 +169,6 @@
int tx_get;
int tx_count;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
@@ -462,13 +456,13 @@
* .text section address and breakpoint on module load.
* This is useful for use with gdb and add-symbol-file command.
*/
-static int break_on_load=0;
+static int break_on_load = 0;
/*
* Driver major number, defaults to zero to get auto
* assigned major number. May be forced as module parameter.
*/
-static int ttymajor=0;
+static int ttymajor = 0;
/*
* Array of user specified options for ISA adapters.
@@ -712,8 +706,8 @@
return;
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->receive_buf)
- ld->receive_buf(tty, data, flags, count);
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
@@ -747,22 +741,22 @@
}
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s open(), old ref count = %d\n",
- __FILE__,__LINE__,tty->driver->name, info->count);
+ __FILE__,__LINE__,tty->driver->name, info->port.count);
/* If port is closing, signal caller to try again */
- if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
goto cleanup;
}
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
@@ -770,10 +764,10 @@
spin_unlock_irqrestore(&info->netlock, flags);
goto cleanup;
}
- info->count++;
+ info->port.count++;
spin_unlock_irqrestore(&info->netlock, flags);
- if (info->count == 1) {
+ if (info->port.count == 1) {
/* 1st open on this device, init hardware */
retval = startup(info);
if (retval < 0)
@@ -796,9 +790,9 @@
cleanup:
if (retval) {
if (tty->count == 1)
- info->tty = NULL; /* tty layer will release tty struct */
- if(info->count)
- info->count--;
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
}
return retval;
@@ -816,33 +810,33 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s close() entry, count=%d\n",
- __FILE__,__LINE__, info->device_name, info->count);
+ __FILE__,__LINE__, info->device_name, info->port.count);
- if (!info->count)
+ if (!info->port.count)
return;
if (tty_hung_up_p(filp))
goto cleanup;
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* tty->count is 1 and the tty structure will be freed.
- * info->count should be one in this case.
+ * info->port.count should be one in this case.
* if it's not, correct it so that the port is shutdown.
*/
printk("%s(%d):%s close: bad refcount; tty->count is 1, "
- "info->count is %d\n",
- __FILE__,__LINE__, info->device_name, info->count);
- info->count = 1;
+ "info->port.count is %d\n",
+ __FILE__,__LINE__, info->device_name, info->port.count);
+ info->port.count = 1;
}
- info->count--;
+ info->port.count--;
/* if at least one open remaining, leave hardware active */
- if (info->count)
+ if (info->port.count)
goto cleanup;
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
/* set tty->closing to notify line discipline to
* only process XON/XOFF characters. Only the N_TTY
@@ -852,14 +846,14 @@
/* wait for transmit data to clear all layers */
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s close() calling tty_wait_until_sent\n",
__FILE__,__LINE__, info->device_name );
- tty_wait_until_sent(tty, info->closing_wait);
+ tty_wait_until_sent(tty, info->port.closing_wait);
}
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
@@ -869,23 +863,23 @@
shutdown(info);
tty->closing = 0;
- info->tty = NULL;
+ info->port.tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ if (info->port.blocked_open) {
+ if (info->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->port.close_wait);
cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
- tty->driver->name, info->count);
+ tty->driver->name, info->port.count);
}
/* Called by tty_hangup() when a hangup is signaled.
@@ -905,11 +899,11 @@
flush_buffer(tty);
shutdown(info);
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
/* Set new termios settings
@@ -1123,7 +1117,7 @@
lock_kernel();
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
goto exit;
orig_jiffies = jiffies;
@@ -1636,7 +1630,7 @@
unsigned short new_crctype;
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
switch (encoding)
@@ -1733,7 +1727,7 @@
/* arbitrate between network and tty opens */
spin_lock_irqsave(&info->netlock, flags);
- if (info->count != 0 || info->netcount != 0) {
+ if (info->port.count != 0 || info->netcount != 0) {
printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
spin_unlock_irqrestore(&info->netlock, flags);
return -EBUSY;
@@ -1819,7 +1813,7 @@
printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
if (cmd != SIOCWANDEV)
@@ -2128,7 +2122,7 @@
static void bh_transmit(SLMP_INFO *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):%s bh_transmit() entry\n",
@@ -2178,7 +2172,7 @@
static void isr_rxint(SLMP_INFO * info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
@@ -2205,7 +2199,7 @@
if (!(status & info->ignore_status_mask1)) {
if (info->read_status_mask1 & BRKD) {
tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
}
}
@@ -2239,7 +2233,7 @@
{
u16 status;
unsigned char DataByte;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -2352,7 +2346,7 @@
else
#endif
{
- if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+ if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
tx_stop(info);
return;
}
@@ -2407,7 +2401,7 @@
return;
}
- if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+ if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
tx_stop(info);
return;
}
@@ -2554,29 +2548,29 @@
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if ( (info->flags & ASYNC_CHECK_CD) &&
+ if ( (info->port.flags & ASYNC_CHECK_CD) &&
(status & MISCSTATUS_DCD_LATCHED) ) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s CD now %s...", info->device_name,
(status & SerialSignal_DCD) ? "on" : "off");
if (status & SerialSignal_DCD)
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
else {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("doing serial hangup...");
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
}
}
- if ( (info->flags & ASYNC_CTS_FLOW) &&
+ if ( (info->port.flags & ASYNC_CTS_FLOW) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
- if ( info->tty ) {
- if (info->tty->hw_stopped) {
+ if ( info->port.tty ) {
+ if (info->port.tty->hw_stopped) {
if (status & SerialSignal_CTS) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx start...");
- info->tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
tx_start(info);
info->pending_bh |= BH_TRANSMIT;
return;
@@ -2585,7 +2579,7 @@
if (!(status & SerialSignal_CTS)) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx stop...");
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
tx_stop(info);
}
}
@@ -2701,7 +2695,7 @@
* do not request bottom half processing if the
* device is not open in a normal mode.
*/
- if ( port && (port->count || port->netcount) &&
+ if ( port && (port->port.count || port->netcount) &&
port->pending_bh && !port->bh_running &&
!port->bh_requested ) {
if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -2727,7 +2721,7 @@
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
if (!info->tx_buf) {
@@ -2750,10 +2744,10 @@
mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
return 0;
}
@@ -2764,7 +2758,7 @@
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -2786,17 +2780,17 @@
reset_port(info);
- if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
spin_unlock_irqrestore(&info->lock,flags);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
}
static void program_hw(SLMP_INFO *info)
@@ -2827,7 +2821,7 @@
get_signals(info);
- if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
+ if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -2840,14 +2834,14 @@
unsigned cflag;
int bits_per_char;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s change_params()\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -2895,7 +2889,7 @@
* current data rate.
*/
if (info->params.data_rate <= 460800) {
- info->params.data_rate = tty_get_baud_rate(info->tty);
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
}
if ( info->params.data_rate ) {
@@ -2905,30 +2899,30 @@
info->timeout += HZ/50; /* Add .02 seconds of slop */
if (cflag & CRTSCTS)
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/* process tty input control flags */
info->read_status_mask2 = OVRN;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask2 |= PE | FRME;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask1 |= BRKD;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask2 |= PE | FRME;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask1 |= BRKD;
/* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask2 |= OVRN;
}
@@ -3348,7 +3342,7 @@
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
/* just verify that callout device is not active */
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3357,25 +3351,25 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() before block, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->count--;
+ info->port.count--;
}
spin_unlock_irqrestore(&info->lock, flags);
- info->blocked_open++;
+ info->port.blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
@@ -3387,8 +3381,8 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
- retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+ retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
@@ -3397,7 +3391,7 @@
get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(info->port.flags & ASYNC_CLOSING) &&
(do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
break;
}
@@ -3409,24 +3403,24 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (extra_count)
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() after, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
if (!retval)
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return retval;
}
@@ -3808,13 +3802,12 @@
printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
__FILE__,__LINE__, adapter_num, port_num);
} else {
+ tty_port_init(&info->port);
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
- info->close_delay = 5*HZ/10;
- info->closing_wait = 30*HZ;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
init_waitqueue_head(&info->status_event_wait_q);
init_waitqueue_head(&info->event_wait_q);
spin_lock_init(&info->netlock);
@@ -4885,7 +4878,7 @@
unsigned int framesize = 0;
bool ReturnCode = false;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned char addr_field = 0xff;
SCADESC *desc;
SCADESC_EX *desc_ex;
@@ -5293,11 +5286,11 @@
bool rc = false;
unsigned long flags;
- struct tty_struct *oldtty = info->tty;
+ struct tty_struct *oldtty = info->port.tty;
u32 speed = info->params.clock_speed;
info->params.clock_speed = 3686400;
- info->tty = NULL;
+ info->port.tty = NULL;
/* assume failure */
info->init_error = DiagStatus_DmaFailure;
@@ -5341,7 +5334,7 @@
spin_unlock_irqrestore(&info->lock,flags);
info->params.clock_speed = speed;
- info->tty = oldtty;
+ info->port.tty = oldtty;
return rc;
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 047a173..82f6a8c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -95,8 +95,9 @@
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
+#include <linux/seq_file.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#include <linux/kbd_kern.h>
@@ -682,7 +683,7 @@
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
-static struct tty_ldisc tty_ldiscs[NR_LDISCS];
+static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
/**
* tty_register_ldisc - install a line discipline
@@ -697,7 +698,7 @@
* takes tty_ldisc_lock to guard against ldisc races
*/
-int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
+int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
{
unsigned long flags;
int ret = 0;
@@ -706,10 +707,9 @@
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- tty_ldiscs[disc] = *new_ldisc;
- tty_ldiscs[disc].num = disc;
- tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
- tty_ldiscs[disc].refcount = 0;
+ tty_ldiscs[disc] = new_ldisc;
+ new_ldisc->num = disc;
+ new_ldisc->refcount = 0;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
@@ -737,19 +737,56 @@
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (tty_ldiscs[disc].refcount)
+ if (tty_ldiscs[disc]->refcount)
ret = -EBUSY;
else
- tty_ldiscs[disc].flags &= ~LDISC_FLAG_DEFINED;
+ tty_ldiscs[disc] = NULL;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
EXPORT_SYMBOL(tty_unregister_ldisc);
+
+/**
+ * tty_ldisc_try_get - try and reference an ldisc
+ * @disc: ldisc number
+ * @ld: tty ldisc structure to complete
+ *
+ * Attempt to open and lock a line discipline into place. Return
+ * the line discipline refcounted and assigned in ld. On an error
+ * report the error code back
+ */
+
+static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
+{
+ unsigned long flags;
+ struct tty_ldisc_ops *ldops;
+ int err = -EINVAL;
+
+ spin_lock_irqsave(&tty_ldisc_lock, flags);
+ ld->ops = NULL;
+ ldops = tty_ldiscs[disc];
+ /* Check the entry is defined */
+ if (ldops) {
+ /* If the module is being unloaded we can't use it */
+ if (!try_module_get(ldops->owner))
+ err = -EAGAIN;
+ else {
+ /* lock it */
+ ldops->refcount++;
+ ld->ops = ldops;
+ err = 0;
+ }
+ }
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ return err;
+}
+
/**
* tty_ldisc_get - take a reference to an ldisc
* @disc: ldisc number
+ * @ld: tty line discipline structure to use
*
* Takes a reference to a line discipline. Deals with refcounts and
* module locking counts. Returns NULL if the discipline is not available.
@@ -760,32 +797,20 @@
* takes tty_ldisc_lock to guard against ldisc races
*/
-struct tty_ldisc *tty_ldisc_get(int disc)
+static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
{
- unsigned long flags;
- struct tty_ldisc *ld;
+ int err;
if (disc < N_TTY || disc >= NR_LDISCS)
- return NULL;
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
-
- ld = &tty_ldiscs[disc];
- /* Check the entry is defined */
- if (ld->flags & LDISC_FLAG_DEFINED) {
- /* If the module is being unloaded we can't use it */
- if (!try_module_get(ld->owner))
- ld = NULL;
- else /* lock it */
- ld->refcount++;
- } else
- ld = NULL;
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return ld;
+ return -EINVAL;
+ err = tty_ldisc_try_get(disc, ld);
+ if (err == -EAGAIN) {
+ request_module("tty-ldisc-%d", disc);
+ err = tty_ldisc_try_get(disc, ld);
+ }
+ return err;
}
-EXPORT_SYMBOL_GPL(tty_ldisc_get);
-
/**
* tty_ldisc_put - drop ldisc reference
* @disc: ldisc number
@@ -797,22 +822,67 @@
* takes tty_ldisc_lock to guard against ldisc races
*/
-void tty_ldisc_put(int disc)
+static void tty_ldisc_put(struct tty_ldisc_ops *ld)
{
- struct tty_ldisc *ld;
unsigned long flags;
+ int disc = ld->num;
BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = &tty_ldiscs[disc];
+ ld = tty_ldiscs[disc];
BUG_ON(ld->refcount == 0);
ld->refcount--;
module_put(ld->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
-EXPORT_SYMBOL_GPL(tty_ldisc_put);
+static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
+{
+ return (*pos < NR_LDISCS) ? pos : NULL;
+}
+
+static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return (*pos < NR_LDISCS) ? pos : NULL;
+}
+
+static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
+{
+}
+
+static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
+{
+ int i = *(loff_t *)v;
+ struct tty_ldisc ld;
+
+ if (tty_ldisc_get(i, &ld) < 0)
+ return 0;
+ seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
+ tty_ldisc_put(ld.ops);
+ return 0;
+}
+
+static const struct seq_operations tty_ldiscs_seq_ops = {
+ .start = tty_ldiscs_seq_start,
+ .next = tty_ldiscs_seq_next,
+ .stop = tty_ldiscs_seq_stop,
+ .show = tty_ldiscs_seq_show,
+};
+
+static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &tty_ldiscs_seq_ops);
+}
+
+const struct file_operations tty_ldiscs_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = proc_tty_ldiscs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
/**
* tty_ldisc_assign - set ldisc on a tty
@@ -829,8 +899,8 @@
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
+ ld->refcount = 0;
tty->ldisc = *ld;
- tty->ldisc.refcount = 0;
}
/**
@@ -954,6 +1024,41 @@
}
/**
+ * tty_ldisc_restore - helper for tty ldisc change
+ * @tty: tty to recover
+ * @old: previous ldisc
+ *
+ * Restore the previous line discipline or N_TTY when a line discipline
+ * change fails due to an open error
+ */
+
+static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
+{
+ char buf[64];
+ struct tty_ldisc new_ldisc;
+
+ /* There is an outstanding reference here so this is safe */
+ tty_ldisc_get(old->ops->num, old);
+ tty_ldisc_assign(tty, old);
+ tty_set_termios_ldisc(tty, old->ops->num);
+ if (old->ops->open && (old->ops->open(tty) < 0)) {
+ tty_ldisc_put(old->ops);
+ /* This driver is always present */
+ if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
+ panic("n_tty: get");
+ tty_ldisc_assign(tty, &new_ldisc);
+ tty_set_termios_ldisc(tty, N_TTY);
+ if (new_ldisc.ops->open) {
+ int r = new_ldisc.ops->open(tty);
+ if (r < 0)
+ panic("Couldn't open N_TTY ldisc for "
+ "%s --- error %d.",
+ tty_name(tty, buf), r);
+ }
+ }
+}
+
+/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -967,28 +1072,18 @@
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
- int retval = 0;
- struct tty_ldisc o_ldisc;
- char buf[64];
+ int retval;
+ struct tty_ldisc o_ldisc, new_ldisc;
int work;
unsigned long flags;
- struct tty_ldisc *ld;
struct tty_struct *o_tty;
- if ((ldisc < N_TTY) || (ldisc >= NR_LDISCS))
- return -EINVAL;
-
restart:
-
- ld = tty_ldisc_get(ldisc);
- /* Eduardo Blanco <ejbs@cs.cs.com.uy> */
- /* Cyrus Durgin <cider@speakeasy.org> */
- if (ld == NULL) {
- request_module("tty-ldisc-%d", ldisc);
- ld = tty_ldisc_get(ldisc);
- }
- if (ld == NULL)
- return -EINVAL;
+ /* This is a bit ugly for now but means we can break the 'ldisc
+ is part of the tty struct' assumption later */
+ retval = tty_ldisc_get(ldisc, &new_ldisc);
+ if (retval)
+ return retval;
/*
* Problem: What do we do if this blocks ?
@@ -996,8 +1091,8 @@
tty_wait_until_sent(tty, 0);
- if (tty->ldisc.num == ldisc) {
- tty_ldisc_put(ldisc);
+ if (tty->ldisc.ops->num == ldisc) {
+ tty_ldisc_put(new_ldisc.ops);
return 0;
}
@@ -1024,7 +1119,7 @@
/* Free the new ldisc we grabbed. Must drop the lock
first. */
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(ldisc);
+ tty_ldisc_put(o_ldisc.ops);
/*
* There are several reasons we may be busy, including
* random momentary I/O traffic. We must therefore
@@ -1038,7 +1133,7 @@
}
if (o_tty && o_tty->ldisc.refcount) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(ldisc);
+ tty_ldisc_put(o_tty->ldisc.ops);
if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
return -ERESTARTSYS;
goto restart;
@@ -1049,8 +1144,9 @@
* another ldisc change
*/
if (!test_bit(TTY_LDISC, &tty->flags)) {
+ struct tty_ldisc *ld;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- tty_ldisc_put(ldisc);
+ tty_ldisc_put(new_ldisc.ops);
ld = tty_ldisc_ref_wait(tty);
tty_ldisc_deref(ld);
goto restart;
@@ -1060,7 +1156,7 @@
if (o_tty)
clear_bit(TTY_LDISC, &o_tty->flags);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
+
/*
* From this point on we know nobody has an ldisc
* usage reference, nor can they obtain one until
@@ -1070,45 +1166,30 @@
work = cancel_delayed_work(&tty->buf.work);
/*
* Wait for ->hangup_work and ->buf.work handlers to terminate
+ * MUST NOT hold locks here.
*/
flush_scheduled_work();
/* Shutdown the current discipline. */
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
+ if (o_ldisc.ops->close)
+ (o_ldisc.ops->close)(tty);
/* Now set up the new line discipline. */
- tty_ldisc_assign(tty, ld);
+ tty_ldisc_assign(tty, &new_ldisc);
tty_set_termios_ldisc(tty, ldisc);
- if (tty->ldisc.open)
- retval = (tty->ldisc.open)(tty);
+ if (new_ldisc.ops->open)
+ retval = (new_ldisc.ops->open)(tty);
if (retval < 0) {
- tty_ldisc_put(ldisc);
- /* There is an outstanding reference here so this is safe */
- tty_ldisc_assign(tty, tty_ldisc_get(o_ldisc.num));
- tty_set_termios_ldisc(tty, tty->ldisc.num);
- if (tty->ldisc.open && (tty->ldisc.open(tty) < 0)) {
- tty_ldisc_put(o_ldisc.num);
- /* This driver is always present */
- tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
- tty_set_termios_ldisc(tty, N_TTY);
- if (tty->ldisc.open) {
- int r = tty->ldisc.open(tty);
-
- if (r < 0)
- panic("Couldn't open N_TTY ldisc for "
- "%s --- error %d.",
- tty_name(tty, buf), r);
- }
- }
+ tty_ldisc_put(new_ldisc.ops);
+ tty_ldisc_restore(tty, &o_ldisc);
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc.num != o_ldisc.num && tty->ops->set_ldisc)
+ if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
- tty_ldisc_put(o_ldisc.num);
+ tty_ldisc_put(o_ldisc.ops);
/*
* Allow ldisc referencing to occur as soon as the driver
@@ -1335,8 +1416,8 @@
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->write_wakeup)
- ld->write_wakeup(tty);
+ if (ld->ops->write_wakeup)
+ ld->ops->write_wakeup(tty);
tty_ldisc_deref(ld);
}
}
@@ -1357,8 +1438,8 @@
{
struct tty_ldisc *ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->flush_buffer)
- ld->flush_buffer(tty);
+ if (ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
tty_ldisc_deref(ld);
}
tty_buffer_flush(tty);
@@ -1386,7 +1467,7 @@
* do_tty_hangup - actual handler for hangup events
* @work: tty device
*
- * This can be called by the "eventd" kernel thread. That is process
+k * This can be called by the "eventd" kernel thread. That is process
* synchronous but doesn't hold any locks, so we need to make sure we
* have the appropriate locks for what we're doing.
*
@@ -1449,14 +1530,14 @@
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
/* We may have no line discipline at this point */
- if (ld->flush_buffer)
- ld->flush_buffer(tty);
+ if (ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
- ld->write_wakeup)
- ld->write_wakeup(tty);
- if (ld->hangup)
- ld->hangup(tty);
+ ld->ops->write_wakeup)
+ ld->ops->write_wakeup(tty);
+ if (ld->ops->hangup)
+ ld->ops->hangup(tty);
}
/*
* FIXME: Once we trust the LDISC code better we can wait here for
@@ -1825,8 +1906,8 @@
/* We want to wait for the line discipline to sort out in this
situation */
ld = tty_ldisc_ref_wait(tty);
- if (ld->read)
- i = (ld->read)(tty, file, buf, count);
+ if (ld->ops->read)
+ i = (ld->ops->read)(tty, file, buf, count);
else
i = -EIO;
tty_ldisc_deref(ld);
@@ -1978,10 +2059,10 @@
printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
tty->driver->name);
ld = tty_ldisc_ref_wait(tty);
- if (!ld->write)
+ if (!ld->ops->write)
ret = -EIO;
else
- ret = do_tty_write(ld->write, tty, file, buf, count);
+ ret = do_tty_write(ld->ops->write, tty, file, buf, count);
tty_ldisc_deref(ld);
return ret;
}
@@ -2007,6 +2088,42 @@
return tty_write(file, buf, count, ppos);
}
+void tty_port_init(struct tty_port *port)
+{
+ memset(port, 0, sizeof(*port));
+ init_waitqueue_head(&port->open_wait);
+ init_waitqueue_head(&port->close_wait);
+ mutex_init(&port->mutex);
+ port->close_delay = (50 * HZ) / 100;
+ port->closing_wait = (3000 * HZ) / 100;
+}
+EXPORT_SYMBOL(tty_port_init);
+
+int tty_port_alloc_xmit_buf(struct tty_port *port)
+{
+ /* We may sleep in get_zeroed_page() */
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+ mutex_unlock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ return -ENOMEM;
+ return 0;
+}
+EXPORT_SYMBOL(tty_port_alloc_xmit_buf);
+
+void tty_port_free_xmit_buf(struct tty_port *port)
+{
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf != NULL) {
+ free_page((unsigned long)port->xmit_buf);
+ port->xmit_buf = NULL;
+ }
+ mutex_unlock(&port->mutex);
+}
+EXPORT_SYMBOL(tty_port_free_xmit_buf);
+
+
static char ptychar[] = "pqrstuvwxyzabcde";
/**
@@ -2076,6 +2193,7 @@
struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
int retval = 0;
+ struct tty_ldisc *ld;
/* check whether we're reopening an existing tty */
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
@@ -2224,17 +2342,19 @@
* If we fail here just call release_tty to clean up. No need
* to decrement the use counts, as release_tty doesn't care.
*/
+
+ ld = &tty->ldisc;
- if (tty->ldisc.open) {
- retval = (tty->ldisc.open)(tty);
+ if (ld->ops->open) {
+ retval = (ld->ops->open)(tty);
if (retval)
goto release_mem_out;
}
- if (o_tty && o_tty->ldisc.open) {
- retval = (o_tty->ldisc.open)(o_tty);
+ if (o_tty && o_tty->ldisc.ops->open) {
+ retval = (o_tty->ldisc.ops->open)(o_tty);
if (retval) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
+ if (ld->ops->close)
+ (ld->ops->close)(tty);
goto release_mem_out;
}
tty_ldisc_enable(o_tty);
@@ -2378,6 +2498,7 @@
static void release_dev(struct file *filp)
{
struct tty_struct *tty, *o_tty;
+ struct tty_ldisc ld;
int pty_master, tty_closing, o_tty_closing, do_sleep;
int devpts;
int idx;
@@ -2611,26 +2732,27 @@
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
/*
* Shutdown the current line discipline, and reset it to N_TTY.
- * N.B. why reset ldisc when we're releasing the memory??
*
* FIXME: this MUST get fixed for the new reflocking
*/
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty_ldisc_put(tty->ldisc.num);
+ if (tty->ldisc.ops->close)
+ (tty->ldisc.ops->close)(tty);
+ tty_ldisc_put(tty->ldisc.ops);
/*
* Switch the line discipline back
*/
- tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
+ WARN_ON(tty_ldisc_get(N_TTY, &ld));
+ tty_ldisc_assign(tty, &ld);
tty_set_termios_ldisc(tty, N_TTY);
if (o_tty) {
/* FIXME: could o_tty be in setldisc here ? */
clear_bit(TTY_LDISC, &o_tty->flags);
- if (o_tty->ldisc.close)
- (o_tty->ldisc.close)(o_tty);
- tty_ldisc_put(o_tty->ldisc.num);
- tty_ldisc_assign(o_tty, tty_ldisc_get(N_TTY));
+ if (o_tty->ldisc.ops->close)
+ (o_tty->ldisc.ops->close)(o_tty);
+ tty_ldisc_put(o_tty->ldisc.ops);
+ WARN_ON(tty_ldisc_get(N_TTY, &ld));
+ tty_ldisc_assign(o_tty, &ld);
tty_set_termios_ldisc(o_tty, N_TTY);
}
/*
@@ -2899,8 +3021,8 @@
return 0;
ld = tty_ldisc_ref_wait(tty);
- if (ld->poll)
- ret = (ld->poll)(tty, filp, wait);
+ if (ld->ops->poll)
+ ret = (ld->ops->poll)(tty, filp, wait);
tty_ldisc_deref(ld);
return ret;
}
@@ -2974,7 +3096,7 @@
if (get_user(ch, p))
return -EFAULT;
ld = tty_ldisc_ref_wait(tty);
- ld->receive_buf(tty, &ch, &mbz, 1);
+ ld->ops->receive_buf(tty, &ch, &mbz, 1);
tty_ldisc_deref(ld);
return 0;
}
@@ -3395,35 +3517,31 @@
static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
unsigned __user *p)
{
- int retval = -EINVAL;
+ int retval;
+ unsigned int set, clear, val;
- if (tty->ops->tiocmset) {
- unsigned int set, clear, val;
+ if (tty->ops->tiocmset == NULL)
+ return -EINVAL;
- retval = get_user(val, p);
- if (retval)
- return retval;
-
- set = clear = 0;
- switch (cmd) {
- case TIOCMBIS:
- set = val;
- break;
- case TIOCMBIC:
- clear = val;
- break;
- case TIOCMSET:
- set = val;
- clear = ~val;
- break;
- }
-
- set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
- clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
-
- retval = tty->ops->tiocmset(tty, file, set, clear);
+ retval = get_user(val, p);
+ if (retval)
+ return retval;
+ set = clear = 0;
+ switch (cmd) {
+ case TIOCMBIS:
+ set = val;
+ break;
+ case TIOCMBIC:
+ clear = val;
+ break;
+ case TIOCMSET:
+ set = val;
+ clear = ~val;
+ break;
}
- return retval;
+ set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
+ clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
+ return tty->ops->tiocmset(tty, file, set, clear);
}
/*
@@ -3528,7 +3646,7 @@
case TIOCGSID:
return tiocgsid(tty, real_tty, p);
case TIOCGETD:
- return put_user(tty->ldisc.num, (int __user *)p);
+ return put_user(tty->ldisc.ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
#ifdef CONFIG_VT
@@ -3581,8 +3699,8 @@
}
ld = tty_ldisc_ref_wait(tty);
retval = -EINVAL;
- if (ld->ioctl) {
- retval = ld->ioctl(tty, file, cmd, arg);
+ if (ld->ops->ioctl) {
+ retval = ld->ops->ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
retval = -EINVAL;
}
@@ -3609,8 +3727,8 @@
}
ld = tty_ldisc_ref_wait(tty);
- if (ld->compat_ioctl)
- retval = ld->compat_ioctl(tty, file, cmd, arg);
+ if (ld->ops->compat_ioctl)
+ retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
tty_ldisc_deref(ld);
return retval;
@@ -3782,7 +3900,8 @@
flag_buf = head->flag_buf_ptr + head->read;
head->read += count;
spin_unlock_irqrestore(&tty->buf.lock, flags);
- disc->receive_buf(tty, char_buf, flag_buf, count);
+ disc->ops->receive_buf(tty, char_buf,
+ flag_buf, count);
spin_lock_irqsave(&tty->buf.lock, flags);
}
/* Restore the queue head */
@@ -3843,9 +3962,12 @@
static void initialize_tty_struct(struct tty_struct *tty)
{
+ struct tty_ldisc ld;
memset(tty, 0, sizeof(struct tty_struct));
tty->magic = TTY_MAGIC;
- tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
+ if (tty_ldisc_get(N_TTY, &ld) < 0)
+ panic("n_tty: init_tty");
+ tty_ldisc_assign(tty, &ld);
tty->session = NULL;
tty->pgrp = NULL;
tty->overrun_time = jiffies;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 8f81139..ea9fc5d 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -491,8 +491,8 @@
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
- if (ld->set_termios)
- (ld->set_termios)(tty, &old_termios);
+ if (ld->ops->set_termios)
+ (ld->ops->set_termios)(tty, &old_termios);
tty_ldisc_deref(ld);
}
mutex_unlock(&tty->termios_mutex);
@@ -552,8 +552,8 @@
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
- if ((opt & TERMIOS_FLUSH) && ld->flush_buffer)
- ld->flush_buffer(tty);
+ if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
tty_ldisc_deref(ld);
}
@@ -959,12 +959,12 @@
ld = tty_ldisc_ref(tty);
switch (arg) {
case TCIFLUSH:
- if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
+ if (ld && ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
break;
case TCIOFLUSH:
- if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
+ if (ld && ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
/* fall through */
case TCOFLUSH:
tty_driver_flush_buffer(tty);
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 7ff71ba..b9694b6 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -216,7 +216,7 @@
* The line discipline structure.
*/
-static struct tty_ldisc serport_ldisc = {
+static struct tty_ldisc_ops serport_ldisc = {
.owner = THIS_MODULE,
.name = "input",
.open = serport_ldisc_open,
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 2095153..8a35029 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -466,7 +466,7 @@
ld = tty_ldisc_ref(mp->tty);
if (ld == NULL)
return -1;
- if (ld->receive_buf == NULL) {
+ if (ld->ops->receive_buf == NULL) {
#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
printk(KERN_DEBUG "capi: ldisc has no receive_buf function\n");
#endif
@@ -501,7 +501,7 @@
printk(KERN_DEBUG "capi: DATA_B3_RESP %u len=%d => ldisc\n",
datahandle, skb->len);
#endif
- ld->receive_buf(mp->tty, skb->data, NULL, skb->len);
+ ld->ops->receive_buf(mp->tty, skb->data, NULL, skb->len);
kfree_skb(skb);
tty_ldisc_deref(ld);
return 0;
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 45d1ee9..5e89fa1 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -766,7 +766,7 @@
cs_put(cs);
}
-static struct tty_ldisc gigaset_ldisc = {
+static struct tty_ldisc_ops gigaset_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "ser_gigaset",
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 9d57212..19dd0a6 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -783,7 +783,7 @@
return err;
}
-static struct tty_ldisc sp_ldisc = {
+static struct tty_ldisc_ops sp_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "6pack",
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 6516603..c6ca475 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -969,7 +969,7 @@
mkiss_put(ax);
}
-static struct tty_ldisc ax_ldisc = {
+static struct tty_ldisc_ops ax_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "mkiss",
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index e6f40b7..9e33196 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -533,7 +533,7 @@
/* ------------------------------------------------------- */
-static struct tty_ldisc irda_ldisc = {
+static struct tty_ldisc_ops irda_ldisc = {
.magic = TTY_LDISC_MAGIC,
.name = "irda",
.flags = 0,
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index f1a52de..451bdb5 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -378,7 +378,7 @@
}
-static struct tty_ldisc ppp_ldisc = {
+static struct tty_ldisc_ops ppp_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "ppp",
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index b8f0369..801d8f9 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -418,7 +418,7 @@
}
-static struct tty_ldisc ppp_sync_ldisc = {
+static struct tty_ldisc_ops ppp_sync_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "pppsync",
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 84af68f..1d58991 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -1301,7 +1301,7 @@
#endif
/* VSV changes end */
-static struct tty_ldisc sl_ldisc = {
+static struct tty_ldisc_ops sl_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "slip",
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index e03eef2..c2c10c6 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -688,9 +688,9 @@
if (cpc_tty->tty) {
ld = tty_ldisc_ref(cpc_tty->tty);
if (ld) {
- if (ld->receive_buf) {
+ if (ld->ops->receive_buf) {
CPC_TTY_DBG("%s: call line disc. receive_buf\n",cpc_tty->name);
- ld->receive_buf(cpc_tty->tty, (char *)(buf->data), &flags, buf->size);
+ ld->ops->receive_buf(cpc_tty->tty, (char *)(buf->data), &flags, buf->size);
}
tty_ldisc_deref(ld);
}
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 069f8bb..2a6c7a6 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -754,7 +754,7 @@
dev->flags = IFF_NOARP;
}
-static struct tty_ldisc x25_ldisc = {
+static struct tty_ldisc_ops x25_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "X.25",
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 883af89..417e9e6 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -2728,7 +2728,7 @@
/************************************************************************/
/* Initialization */
-static struct tty_ldisc strip_ldisc = {
+static struct tty_ldisc_ops strip_ldisc = {
.magic = TTY_LDISC_MAGIC,
.name = "strip",
.owner = THIS_MODULE,
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 0276471..6558a40 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -4,8 +4,6 @@
* Driver for the serial port on the 21285 StrongArm-110 core logic chip.
*
* Based on drivers/char/serial.c
- *
- * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
*/
#include <linux/module.h>
#include <linux/tty.h>
@@ -88,7 +86,7 @@
static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned int status, ch, flag, rxs, max_count = 256;
status = *CSR_UARTFLG;
@@ -237,8 +235,8 @@
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
- if (port->info && port->info->tty) {
- struct tty_struct *tty = port->info->tty;
+ if (port->info && port->info->port.tty) {
+ struct tty_struct *tty = port->info->port.tty;
unsigned int b = port->uartclk / (16 * quot);
tty_encode_baud_rate(tty, b, b);
}
@@ -494,7 +492,7 @@
{
int ret;
- printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
+ printk(KERN_INFO "Serial: 21285 driver\n");
serial21285_setup_ports();
@@ -515,5 +513,5 @@
module_exit(serial21285_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
+MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index bbf5bc5..381b12a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -249,7 +249,7 @@
{
#if 0
if(status & DCD) {
- if((info->tty->termios->c_cflag & CRTSCTS) &&
+ if((info->port.tty->termios->c_cflag & CRTSCTS) &&
((info->curregs[3] & AUTO_ENAB)==0)) {
info->curregs[3] |= AUTO_ENAB;
info->pendregs[3] |= AUTO_ENAB;
@@ -274,7 +274,7 @@
static void receive_chars(struct m68k_serial *info, unsigned short rx)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
m68328_uart *uart = &uart_addr[info->line];
unsigned char ch, flag;
@@ -345,7 +345,7 @@
goto clear_and_return;
}
- if((info->xmit_cnt <= 0) || info->tty->stopped) {
+ if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
/* That's peculiar... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
@@ -403,7 +403,7 @@
struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue);
struct tty_struct *tty;
- tty = info->tty;
+ tty = info->port.tty;
if (!tty)
return;
#if 0
@@ -427,7 +427,7 @@
struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup);
struct tty_struct *tty;
- tty = info->tty;
+ tty = info->port.tty;
if (!tty)
return;
@@ -471,8 +471,8 @@
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
#endif
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
@@ -506,8 +506,8 @@
info->xmit_buf = 0;
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->flags &= ~S_INITIALIZED;
local_irq_restore(flags);
@@ -573,9 +573,9 @@
unsigned cflag;
int i;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
if (!(port = info->port))
return;
@@ -1131,7 +1131,7 @@
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
- info->tty = 0;
+ info->port.tty = NULL;
#warning "This is not and has never been valid so fix it"
#if 0
if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1169,7 +1169,7 @@
info->event = 0;
info->count = 0;
info->flags &= ~S_NORMAL_ACTIVE;
- info->tty = 0;
+ info->port.tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1286,7 +1286,7 @@
info->count++;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
/*
* Start up serial port
@@ -1363,7 +1363,7 @@
info = &m68k_soft[i];
info->magic = SERIAL_MAGIC;
info->port = (int) &uart_addr[i];
- info->tty = 0;
+ info->port.tty = NULL;
info->irq = uart_irqs[i];
info->custom_divisor = 16;
info->close_delay = 50;
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index d9d4e95..24661cd 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -393,7 +393,7 @@
static _INLINE_ void receive_chars(ser_info_t *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned char ch, flag, *cp;
/*int ignored = 0;*/
int i;
@@ -514,7 +514,7 @@
static _INLINE_ void receive_break(ser_info_t *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
info->state->icount.brk++;
/* Check to see if there is room in the tty buffer for
@@ -528,7 +528,7 @@
{
if ((info->flags & TX_WAKEUP) ||
- (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
+ (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
schedule_work(&info->tqueue);
}
@@ -584,12 +584,12 @@
}
}
if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty->hw_stopped) {
+ if (info->port.tty->hw_stopped) {
if (status & UART_MSR_CTS) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
- info->tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
@@ -600,7 +600,7 @@
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
}
@@ -670,7 +670,7 @@
ser_info_t *info = (ser_info_t *) private_;
struct tty_struct *tty;
- tty = info->tty;
+ tty = info->port.tty;
if (!tty)
return;
@@ -693,7 +693,7 @@
struct async_struct *info = (struct async_struct *) private_;
struct tty_struct *tty;
- tty = info->tty;
+ tty = info->port.tty;
if (!tty)
return;
@@ -721,8 +721,8 @@
#ifdef maybe
if (!state->port || !state->type) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
goto errout;
}
#endif
@@ -734,12 +734,12 @@
#ifdef modem_control
info->MCR = 0;
- if (info->tty->termios->c_cflag & CBAUD)
+ if (info->port.tty->termios->c_cflag & CBAUD)
info->MCR = UART_MCR_DTR | UART_MCR_RTS;
#endif
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
/*
* and set the speed of the serial port
@@ -842,8 +842,8 @@
smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -863,9 +863,9 @@
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
state = info->state;
@@ -936,24 +936,24 @@
* Set up parity check flag
*/
info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= BD_SC_FR | BD_SC_PR;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= BD_SC_BR;
/*
* Characters to ignore
*/
info->ignore_status_mask = 0;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= BD_SC_BR;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= BD_SC_OV;
}
/*
@@ -1658,7 +1658,7 @@
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
- info->tty = 0;
+ info->port.tty = NULL;
if (info->blocked_open) {
if (info->close_delay) {
msleep_interruptible(jiffies_to_msecs(info->close_delay));
@@ -1758,7 +1758,7 @@
info->event = 0;
state->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = 0;
+ info->port.tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1919,7 +1919,7 @@
printk("rs_open %s, count = %d\n", tty->name, info->state->count);
#endif
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
/*
* Start up serial port
@@ -1976,7 +1976,7 @@
info->port = state->port;
info->flags = state->flags;
info->quot = 0;
- info->tty = 0;
+ info->port.tty = NULL;
}
local_irq_disable();
status = serial_in(info, UART_MSR);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index be95e55..ce948b6 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -12,8 +12,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
- *
* A note about mapbase / membase
*
* mapbase is the physical address of the IO port.
@@ -1289,7 +1287,7 @@
static void
receive_chars(struct uart_8250_port *up, unsigned int *status)
{
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned char ch, lsr = *status;
int max_count = 256;
char flag;
@@ -2934,7 +2932,7 @@
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
+ printk(KERN_INFO "Serial: 8250/16550 driver"
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
@@ -2995,7 +2993,7 @@
EXPORT_SYMBOL(serial8250_resume_port);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
module_param(share_irqs, uint, 0644);
MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 91bd28f..78c0016 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -11,8 +11,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
*/
#include <linux/serial_8250.h>
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 788c3559..1b36087 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -10,8 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
- *
- * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 638b686..fde7f9c 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -12,8 +12,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
- *
- * $Id: 8250_pnp.c,v 1.10 2002/07/21 21:32:30 rmk Exp $
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 18ca907..8fc7451 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1,8 +1,6 @@
#
# Serial device configuration
#
-# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
-#
menu "Serial drivers"
depends on HAS_IOMEM
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7d85c1f..3a0bbbe 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -1,8 +1,6 @@
#
# Makefile for the kernel serial device drivers.
#
-# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
-#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e88da72..90b56c2 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -22,8 +22,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
@@ -119,7 +117,7 @@
static void pl010_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.info->tty;
+ struct tty_struct *tty = uap->port.info->port.tty;
unsigned int status, ch, flag, rsr, max_count = 256;
status = readb(uap->port.membase + UART01x_FR);
@@ -791,7 +789,7 @@
{
int ret;
- printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
+ printk(KERN_INFO "Serial: AMBA driver\n");
ret = uart_register_driver(&amba_reg);
if (ret == 0) {
@@ -812,5 +810,5 @@
module_exit(pl010_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
+MODULE_DESCRIPTION("ARM AMBA serial port driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 08adc1d..9d08f27 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -22,8 +22,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
@@ -109,7 +107,7 @@
static void pl011_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.info->tty;
+ struct tty_struct *tty = uap->port.info->port.tty;
unsigned int status, ch, flag, max_count = 256;
status = readw(uap->port.membase + UART01x_FR);
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 6aeef22b..1fee12c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -662,14 +662,14 @@
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->info->tty);
+ tty_flip_buffer_push(port->info->port.tty);
spin_lock(&port->lock);
}
static void atmel_rx_from_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
struct atmel_dma_buffer *pdc;
int rx_idx = atmel_port->pdc_rx_idx;
unsigned int head;
@@ -794,7 +794,7 @@
static int atmel_startup(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
int retval;
/*
@@ -956,6 +956,20 @@
}
/*
+ * Flush any TX data submitted for DMA. Called when the TX circular
+ * buffer is reset.
+ */
+static void atmel_flush_buffer(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_dma_tx(port)) {
+ UART_PUT_TCR(port, 0);
+ atmel_port->pdc_tx.ofs = 0;
+ }
+}
+
+/*
* Power / Clock management.
*/
static void atmel_serial_pm(struct uart_port *port, unsigned int state,
@@ -1189,6 +1203,7 @@
.break_ctl = atmel_break_ctl,
.startup = atmel_startup,
.shutdown = atmel_shutdown,
+ .flush_buffer = atmel_flush_buffer,
.set_termios = atmel_set_termios,
.type = atmel_type,
.release_port = atmel_release_port,
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index fd9bb77..9d85437 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -175,7 +175,7 @@
#ifdef CONFIG_SERIAL_BFIN_PIO
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.info->tty;
+ struct tty_struct *tty = uart->port.info->port.tty;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
@@ -393,7 +393,7 @@
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.info->tty;
+ struct tty_struct *tty = uart->port.info->port.tty;
int i, flg, status;
status = UART_GET_LSR(uart);
@@ -552,7 +552,7 @@
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
unsigned int status;
struct uart_info *info = uart->port.info;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
status = bfin_serial_get_mctrl(&uart->port);
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
@@ -814,10 +814,10 @@
int line = port->line;
unsigned short val;
- if (line >= port->info->tty->driver->num)
+ if (line >= port->info->port.tty->driver->num)
return;
- switch (port->info->tty->ldisc.num) {
+ switch (port->info->port.tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index aca1240..dd8564d 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -174,7 +174,7 @@
static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
{
struct sport_uart_port *up = dev_id;
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned int ch;
do {
@@ -201,7 +201,7 @@
static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
{
struct sport_uart_port *up = dev_id;
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned int stat = SPORT_GET_STAT(up);
/* Overflow in RX FIFO */
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 2382718..fc1fa92 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -21,9 +21,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
- *
*/
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -96,7 +93,7 @@
static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned int status, ch, flg;
status = clps_readl(SYSFLG(port));
@@ -551,7 +548,7 @@
{
int ret, i;
- printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
+ printk(KERN_INFO "Serial: CLPS711x driver\n");
ret = uart_register_driver(&clps711x_reg);
if (ret)
@@ -577,6 +574,6 @@
module_exit(clps711xuart_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
+MODULE_DESCRIPTION("CLPS-711x generic serial driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 3e0366e..8249ac4 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -968,7 +968,7 @@
/* Calculate the chartime depending on baudrate, numbor of bits etc. */
static void update_char_time(struct e100_serial * info)
{
- tcflag_t cflags = info->tty->termios->c_cflag;
+ tcflag_t cflags = info->port.tty->termios->c_cflag;
int bits;
/* calc. number of bits / data byte */
@@ -1483,7 +1483,8 @@
CIRC_CNT(info->xmit.head,
info->xmit.tail,SERIAL_XMIT_SIZE)));
- xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
+ STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
if (tty->termios->c_iflag & IXON ) {
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
@@ -1772,7 +1773,7 @@
info->icount.rx++;
} else {
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
tty_insert_flip_char(tty, data, flag);
info->icount.rx++;
}
@@ -1838,7 +1839,7 @@
descr->status = 0;
DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl);
- if (info->tty->stopped) {
+ if (info->port.tty->stopped) {
unsigned char *buf = phys_to_virt(descr->buf);
DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]);
DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]);
@@ -1872,7 +1873,7 @@
IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
- tty = info->tty;
+ tty = info->port.tty;
if (!tty) /* Something wrong... */
return;
@@ -2122,7 +2123,7 @@
unsigned long flags;
local_irq_save(flags);
- tty = info->tty;
+ tty = info->port.tty;
if (!tty) {
local_irq_restore(flags);
@@ -2287,7 +2288,7 @@
struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
{
unsigned long data_read;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
if (!tty) {
printk("!NO TTY!\n");
@@ -2350,7 +2351,7 @@
data_in, data_read);
char flag = TTY_NORMAL;
if (info->errorcode == ERRCODE_INSERT_BREAK) {
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
tty_insert_flip_char(tty, 0, flag);
info->icount.rx++;
}
@@ -2396,7 +2397,7 @@
goto more_data;
}
- tty_flip_buffer_push(info->tty);
+ tty_flip_buffer_push(info->port.tty);
return info;
}
@@ -2547,8 +2548,8 @@
rstat = info->port[REG_STATUS];
DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
e100_disable_serial_tx_ready_irq(info);
- if (info->tty->stopped)
- rs_stop(info->tty);
+ if (info->port.tty->stopped)
+ rs_stop(info->port.tty);
/* Enable the DMA channel and tell it to continue */
e100_enable_txdma_channel(info);
/* Wait 12 cycles before doing the DMA command */
@@ -2561,9 +2562,10 @@
}
/* Normal char-by-char interrupt */
if (info->xmit.head == info->xmit.tail
- || info->tty->stopped
- || info->tty->hw_stopped) {
- DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", info->tty->stopped));
+ || info->port.tty->stopped
+ || info->port.tty->hw_stopped) {
+ DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n",
+ info->port.tty->stopped));
e100_disable_serial_tx_ready_irq(info);
info->tr_running = 0;
return;
@@ -2725,7 +2727,7 @@
info = container_of(work, struct e100_serial, work);
- tty = info->tty;
+ tty = info->port.tty;
if (!tty)
return;
@@ -2767,8 +2769,8 @@
/* Bits and pieces collected from below. Better to have them
in one ifdef:ed clause than to mix in a lot of ifdefs,
right? */
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit.head = info->xmit.tail = 0;
info->first_recv_buffer = info->last_recv_buffer = NULL;
@@ -2825,8 +2827,8 @@
e100_disable_txdma_channel(info);
}
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit.head = info->xmit.tail = 0;
info->first_recv_buffer = info->last_recv_buffer = NULL;
@@ -2940,14 +2942,14 @@
descr[i].buf = 0;
}
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
/* hang up DTR and RTS if HUPCL is enabled */
e100_dtr(info, 0);
e100_rts(info, 0); /* could check CRTSCTS before doing this */
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -2964,12 +2966,12 @@
unsigned long flags;
/* first some safety checks */
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
if (!info->port)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
/* possibly, the tx/rx should be disabled first to do this safely */
@@ -3097,10 +3099,11 @@
info->port[REG_TR_CTRL] = info->tx_ctrl;
info->port[REG_REC_CTRL] = info->rx_ctrl;
- xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (info->tty->termios->c_iflag & IXON ) {
- DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", STOP_CHAR(info->tty)));
+ if (info->port.tty->termios->c_iflag & IXON ) {
+ DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
+ STOP_CHAR(info->port.tty)));
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
@@ -3475,7 +3478,7 @@
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
if (info->flags & ASYNC_INITIALIZED) {
@@ -3811,7 +3814,7 @@
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
- info->tty = 0;
+ info->port.tty = NULL;
if (info->blocked_open) {
if (info->close_delay)
schedule_timeout_interruptible(info->close_delay);
@@ -3915,7 +3918,7 @@
info->event = 0;
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = 0;
+ info->port.tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -4077,9 +4080,9 @@
info->count++;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
if (!tmp_buf) {
page = get_zeroed_page(GFP_KERNEL);
@@ -4267,14 +4270,14 @@
(unsigned long)info->max_recv_cnt);
#if 1
- if (info->tty) {
+ if (info->port.tty) {
- if (info->tty->stopped)
+ if (info->port.tty->stopped)
ret += sprintf(buf+ret, " stopped:%i",
- (int)info->tty->stopped);
- if (info->tty->hw_stopped)
+ (int)info->port.tty->stopped);
+ if (info->port.tty->hw_stopped)
ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->tty->hw_stopped);
+ (int)info->port.tty->hw_stopped);
}
{
@@ -4465,7 +4468,7 @@
info->uses_dma_in = 0;
info->uses_dma_out = 0;
info->line = i;
- info->tty = 0;
+ info->port.tty = NULL;
info->type = PORT_ETRAX;
info->tr_running = 0;
info->forced_eop = 0;
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index 0dddd68..a81d2c2 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -197,7 +197,7 @@
while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
dport = &mux->dport[LINE(status)];
uport = &dport->port;
- tty = uport->info->tty; /* point to the proper dev */
+ tty = uport->info->port.tty; /* point to the proper dev */
ch = UCHAR(status); /* grab the char */
flag = TTY_NORMAL;
@@ -249,7 +249,7 @@
}
for (i = 0; i < DZ_NB_PORT; i++)
if (lines_rx[i])
- tty_flip_buffer_push(mux->dport[i].port.info->tty);
+ tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
}
/*
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 64acb39..e0da4dc 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -372,7 +372,7 @@
{
struct imx_port *sport = dev_id;
unsigned int rx,flg,ignored = 0;
- struct tty_struct *tty = sport->port.info->tty;
+ struct tty_struct *tty = sport->port.info->port.tty;
unsigned long flags, temp;
spin_lock_irqsave(&sport->port.lock,flags);
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 4f1af71..6dd98f9 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -905,7 +905,7 @@
return;
info = the_port->info;
- tty = info->tty;
+ tty = info->port.tty;
if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
/* Nothing to do or hw stopped */
@@ -997,14 +997,14 @@
the_port->ignore_status_mask = N_ALL_INPUT;
- info->tty->low_latency = 1;
+ info->port.tty->low_latency = 1;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
@@ -1399,14 +1399,14 @@
/* Make sure all the pointers are "good" ones */
if (!info)
return 0;
- if (!info->tty)
+ if (!info->port.tty)
return 0;
if (!(port->ip_flags & INPUT_ENABLE))
return 0;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = info->tty;
+ tty = info->port.tty;
read_count = do_read(the_port, ch, MAX_CHARS);
if (read_count > 0) {
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 49b8a82..6bab63c 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1635,7 +1635,7 @@
return;
info = the_port->info;
- tty = info->tty;
+ tty = info->port.tty;
if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
/* Nothing to do or hw stopped */
@@ -1738,14 +1738,14 @@
the_port->ignore_status_mask = N_ALL_INPUT;
- info->tty->low_latency = 1;
+ info->port.tty->low_latency = 1;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
@@ -1801,7 +1801,8 @@
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, info->tty->termios, (struct ktermios *)0);
+ ioc4_change_speed(the_port, info->port.tty->termios,
+ (struct ktermios *)0);
return 0;
}
@@ -2346,11 +2347,11 @@
/* Make sure all the pointers are "good" ones */
if (!info)
return;
- if (!info->tty)
+ if (!info->port.tty)
return;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = info->tty;
+ tty = info->port.tty;
request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
@@ -2440,8 +2441,8 @@
wake_up_interruptible(&info->delta_msr_wait);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 9c95bc0..0d9acbd 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -257,8 +257,8 @@
tty = NULL;
if (up->port.info != NULL &&
- up->port.info->tty != NULL)
- tty = up->port.info->tty;
+ up->port.info->port.tty != NULL)
+ tty = up->port.info->port.tty;
for (;;) {
ch = readb(&channel->control);
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b2d6f5b..b7584ca 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -998,7 +998,7 @@
{ 50, B50 },
};
- cflag = C_BAUD(ch->uart_port.info->tty);
+ cflag = C_BAUD(ch->uart_port.info->port.tty);
baud = 9600;
for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
if (baud_rates[i].cflag == cflag) {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 94ec663..a697914 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -145,7 +145,7 @@
struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- termios = port->info->tty->termios;
+ termios = port->info->port.tty->termios;
if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
@@ -239,7 +239,7 @@
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- termios = port->info->tty->termios;
+ termios = port->info->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
channel->ch_c_oflag = termios->c_oflag;
@@ -272,7 +272,7 @@
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = channel->uart_port.info->tty->termios;
+ ts = channel->uart_port.info->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
@@ -515,7 +515,7 @@
if (!ch)
return;
- tp = ch->uart_port.info->tty;
+ tp = ch->uart_port.info->port.tty;
bd = ch->ch_bd;
if(!bd)
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index c2bb11c..23d0305 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -325,7 +325,7 @@
static void receive_chars(struct uart_sio_port *up, int *status)
{
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned char ch;
unsigned char flag;
int max_count = 256;
@@ -1160,7 +1160,7 @@
{
int ret, i;
- printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ ");
+ printk(KERN_INFO "Serial: M32R SIO driver\n");
for (i = 0; i < NR_IRQS; i++)
spin_lock_init(&irq_lists[i].lock);
@@ -1189,4 +1189,4 @@
EXPORT_SYMBOL(m32r_sio_resume_port);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $");
+MODULE_DESCRIPTION("Generic M32R SIO serial driver");
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 7e164e0..b2001c5 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -312,7 +312,7 @@
uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
}
- tty_flip_buffer_push(port->info->tty);
+ tty_flip_buffer_push(port->info->port.tty);
}
/****************************************************************************/
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index 56007cc..fbe3835 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -327,7 +327,7 @@
static inline void receive_chars(struct mcf_serial *info)
{
volatile unsigned char *uartp;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned char status, ch, flag;
if (!tty)
@@ -382,7 +382,7 @@
info->stats.tx++;
}
- if ((info->xmit_cnt <= 0) || info->tty->stopped) {
+ if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
info->imr &= ~MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
return;
@@ -428,7 +428,7 @@
static void mcfrs_offintr(struct work_struct *work)
{
struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
if (tty)
tty_wakeup(tty);
@@ -498,7 +498,7 @@
static void do_serial_hangup(struct work_struct *work)
{
struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
if (tty)
tty_hangup(tty);
@@ -532,8 +532,8 @@
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
mcfrs_setsignals(info, 1, 1);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
@@ -578,7 +578,7 @@
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
mcfrs_setsignals(info, 0, 0);
if (info->xmit_buf) {
@@ -586,8 +586,8 @@
info->xmit_buf = 0;
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -609,9 +609,9 @@
unsigned int fraction;
#endif
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
if (info->addr == 0)
return;
@@ -623,7 +623,7 @@
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 4)
- info->tty->termios->c_cflag &= ~CBAUDEX;
+ info->port.tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
@@ -1216,7 +1216,7 @@
tty->closing = 0;
info->event = 0;
- info->tty = 0;
+ info->port.tty = NULL;
#if 0
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
@@ -1325,7 +1325,7 @@
info->event = 0;
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = 0;
+ info->port.tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1452,7 +1452,7 @@
#endif
info->count++;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
/*
* Start up serial port
@@ -1767,7 +1767,7 @@
for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
info->magic = SERIAL_MAGIC;
info->line = i;
- info->tty = 0;
+ info->port.tty = NULL;
info->custom_divisor = 16;
info->close_delay = 50;
info->closing_wait = 3000;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index efc971d..3612607 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -732,7 +732,7 @@
static inline int
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned char ch, flag;
unsigned short status;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index e8819c4..c9f53e7 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -932,7 +932,7 @@
static int mpsc_rx_intr(struct mpsc_port_info *pi)
{
struct mpsc_rx_desc *rxre;
- struct tty_struct *tty = pi->port.info->tty;
+ struct tty_struct *tty = pi->port.info->port.tty;
u32 cmdstat, bytes_in, i;
int rc = 0;
u8 *bp;
@@ -1972,7 +1972,7 @@
{
int rc;
- printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
+ printk(KERN_INFO "Serial: MPSC driver\n");
memset(mpsc_ports, 0, sizeof(mpsc_ports));
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
@@ -2004,7 +2004,7 @@
module_exit(mpsc_drv_exit);
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
-MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
+MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index e940317..953a5ff 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -243,7 +243,7 @@
static void mux_read(struct uart_port *port)
{
int data;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
__u32 start_count = port->icount.rx;
while(1) {
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 81ac9bb..9f8ccb7 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -203,7 +203,7 @@
static void netx_rxint(struct uart_port *port)
{
unsigned char rx, flg, status;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
rx = readl(port->membase + UART_DR);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 794bd0f..317b061 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -242,12 +242,12 @@
}
/* Sanity check, make sure the old bug is no longer happening */
- if (uap->port.info == NULL || uap->port.info->tty == NULL) {
+ if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
WARN_ON(1);
(void)read_zsdata(uap);
return NULL;
}
- tty = uap->port.info->tty;
+ tty = uap->port.info->port.tty;
while (1) {
error = 0;
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index d0e5a79..22e30d2 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -181,7 +181,7 @@
static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
{
- struct tty_struct *tty = sport->port.info->tty;
+ struct tty_struct *tty = sport->port.info->port.tty;
unsigned int status, ch, flg;
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -824,7 +824,7 @@
{
int ret;
- printk(KERN_INFO "Serial: PNX8XXX driver $Revision: 1.2 $\n");
+ printk(KERN_INFO "Serial: PNX8XXX driver\n");
pnx8xxx_init_ports();
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b4f7ffb..b9a93f3 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -101,7 +101,7 @@
static inline void receive_chars(struct uart_pxa_port *up, int *status)
{
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned int ch, flag;
int max_count = 256;
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 62b3858..a5e76cc 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -20,9 +20,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
- *
*/
#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -192,7 +189,7 @@
static void
sa1100_rx_chars(struct sa1100_port *sport)
{
- struct tty_struct *tty = sport->port.info->tty;
+ struct tty_struct *tty = sport->port.info->port.tty;
unsigned int status, ch, flg;
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -892,7 +889,7 @@
{
int ret;
- printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n");
+ printk(KERN_INFO "Serial: SA11x0 driver\n");
sa1100_init_ports();
@@ -915,7 +912,7 @@
module_exit(sa1100_serial_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
+MODULE_DESCRIPTION("SA1100 generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
MODULE_ALIAS("platform:sa11x0-uart");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index f8e1447..a4fb343a 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -384,7 +384,7 @@
uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
}
- tty_flip_buffer_push(uport->info->tty);
+ tty_flip_buffer_push(uport->info->port.tty);
}
static void sbd_transmit_chars(struct sbd_port *sport)
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index ae2a9e2..e0be11c 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -141,7 +141,7 @@
u8 status;
if (port->info != NULL) /* Unopened serial console */
- tty = port->info->tty;
+ tty = port->info->port.tty;
while (limit-- > 0) {
status = READ_SC_PORT(port, SR);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 42d2e10..0bce1fe 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -50,7 +50,7 @@
#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0))
+#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->port.blocked_open : 0))
#ifdef CONFIG_SERIAL_CORE_CONSOLE
#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
@@ -113,7 +113,7 @@
static void uart_tasklet_action(unsigned long data)
{
struct uart_state *state = (struct uart_state *)data;
- tty_wakeup(state->info->tty);
+ tty_wakeup(state->info->port.tty);
}
static inline void
@@ -135,7 +135,7 @@
/*
* Startup the port. This will be called once per open. All calls
- * will be serialised by the per-port semaphore.
+ * will be serialised by the per-port mutex.
*/
static int uart_startup(struct uart_state *state, int init_hw)
{
@@ -152,7 +152,7 @@
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
if (port->type == PORT_UNKNOWN)
return 0;
@@ -162,6 +162,7 @@
* buffer.
*/
if (!info->xmit.buf) {
+ /* This is protected by the per port mutex */
page = get_zeroed_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
@@ -182,20 +183,20 @@
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (info->tty->termios->c_cflag & CBAUD)
+ if (info->port.tty->termios->c_cflag & CBAUD)
uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
}
if (info->flags & UIF_CTS_FLOW) {
spin_lock_irq(&port->lock);
if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
- info->tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
spin_unlock_irq(&port->lock);
}
info->flags |= UIF_INITIALIZED;
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
}
if (retval && capable(CAP_SYS_ADMIN))
@@ -217,8 +218,8 @@
/*
* Set the TTY IO error marker
*/
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
if (info->flags & UIF_INITIALIZED) {
info->flags &= ~UIF_INITIALIZED;
@@ -226,7 +227,7 @@
/*
* Turn off DTR and RTS early.
*/
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
/*
@@ -426,7 +427,7 @@
static void
uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
- struct tty_struct *tty = state->info->tty;
+ struct tty_struct *tty = state->info->port.tty;
struct uart_port *port = state->port;
struct ktermios *termios;
@@ -573,6 +574,8 @@
spin_lock_irqsave(&port->lock, flags);
uart_circ_clear(&state->info->xmit);
+ if (port->ops->flush_buffer)
+ port->ops->flush_buffer(port);
spin_unlock_irqrestore(&port->lock, flags);
tty_wakeup(tty);
}
@@ -834,8 +837,8 @@
state->closing_wait = closing_wait;
if (new_serial.xmit_fifo_size)
port->fifosize = new_serial.xmit_fifo_size;
- if (state->info->tty)
- state->info->tty->low_latency =
+ if (state->info->port.tty)
+ state->info->port.tty->low_latency =
(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
check_and_exit:
@@ -855,7 +858,7 @@
printk(KERN_NOTICE
"%s sets custom speed on %s. This "
"is deprecated.\n", current->comm,
- tty_name(state->info->tty, buf));
+ tty_name(state->info->port.tty, buf));
}
uart_change_speed(state, NULL);
}
@@ -887,7 +890,7 @@
*/
if (port->x_char ||
((uart_circ_chars_pending(&state->info->xmit) > 0) &&
- !state->info->tty->stopped && !state->info->tty->hw_stopped))
+ !state->info->port.tty->stopped && !state->info->port.tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
@@ -1237,7 +1240,7 @@
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&state->info->open_wait);
+ wake_up_interruptible(&state->info->port.open_wait);
#endif
}
@@ -1318,9 +1321,9 @@
tty_ldisc_flush(tty);
tty->closing = 0;
- state->info->tty = NULL;
+ state->info->port.tty = NULL;
- if (state->info->blocked_open) {
+ if (state->info->port.blocked_open) {
if (state->close_delay)
msleep_interruptible(state->close_delay);
} else if (!uart_console(port)) {
@@ -1331,7 +1334,7 @@
* Wake up anyone trying to open this port.
*/
state->info->flags &= ~UIF_NORMAL_ACTIVE;
- wake_up_interruptible(&state->info->open_wait);
+ wake_up_interruptible(&state->info->port.open_wait);
done:
mutex_unlock(&state->mutex);
@@ -1415,8 +1418,8 @@
uart_shutdown(state);
state->count = 0;
state->info->flags &= ~UIF_NORMAL_ACTIVE;
- state->info->tty = NULL;
- wake_up_interruptible(&state->info->open_wait);
+ state->info->port.tty = NULL;
+ wake_up_interruptible(&state->info->port.open_wait);
wake_up_interruptible(&state->info->delta_msr_wait);
}
mutex_unlock(&state->mutex);
@@ -1430,7 +1433,7 @@
*/
static void uart_update_termios(struct uart_state *state)
{
- struct tty_struct *tty = state->info->tty;
+ struct tty_struct *tty = state->info->port.tty;
struct uart_port *port = state->port;
if (uart_console(port) && port->cons->cflag) {
@@ -1469,17 +1472,17 @@
struct uart_port *port = state->port;
unsigned int mctrl;
- info->blocked_open++;
+ info->port.blocked_open++;
state->count--;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
/*
* If we have been hung up, tell userspace/restart open.
*/
- if (tty_hung_up_p(filp) || info->tty == NULL)
+ if (tty_hung_up_p(filp) || info->port.tty == NULL)
break;
/*
@@ -1498,8 +1501,8 @@
* have set TTY_IO_ERROR for a non-existant port.
*/
if ((filp->f_flags & O_NONBLOCK) ||
- (info->tty->termios->c_cflag & CLOCAL) ||
- (info->tty->flags & (1 << TTY_IO_ERROR)))
+ (info->port.tty->termios->c_cflag & CLOCAL) ||
+ (info->port.tty->flags & (1 << TTY_IO_ERROR)))
break;
/*
@@ -1507,7 +1510,7 @@
* not set RTS here - we want to make sure we catch
* the data from the modem.
*/
- if (info->tty->termios->c_cflag & CBAUD)
+ if (info->port.tty->termios->c_cflag & CBAUD)
uart_set_mctrl(port, TIOCM_DTR);
/*
@@ -1529,15 +1532,15 @@
break;
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
state->count++;
- info->blocked_open--;
+ info->port.blocked_open--;
if (signal_pending(current))
return -ERESTARTSYS;
- if (!info->tty || tty_hung_up_p(filp))
+ if (!info->port.tty || tty_hung_up_p(filp))
return -EAGAIN;
return 0;
@@ -1560,10 +1563,13 @@
goto err_unlock;
}
+ /* BKL: RACE HERE - LEAK */
+ /* We should move this into the uart_state structure and kill off
+ this whole complexity */
if (!state->info) {
state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL);
if (state->info) {
- init_waitqueue_head(&state->info->open_wait);
+ init_waitqueue_head(&state->info->port.open_wait);
init_waitqueue_head(&state->info->delta_msr_wait);
/*
@@ -1620,7 +1626,7 @@
* be re-entered while allocating the info structure, or while we
* request any IRQs that the driver may need. This also has the nice
* side-effect that it delays the action of uart_hangup, so we can
- * guarantee that info->tty will always contain something reasonable.
+ * guarantee that info->port.tty will always contain something reasonable.
*/
state = uart_get(drv, line);
if (IS_ERR(state)) {
@@ -1636,7 +1642,7 @@
tty->driver_data = state;
tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
tty->alt_speed = 0;
- state->info->tty = tty;
+ state->info->port.tty = tty;
/*
* If the port is in the middle of closing, bail out now.
@@ -2099,8 +2105,8 @@
/*
* If that's unset, use the tty termios setting.
*/
- if (state->info && state->info->tty && termios.c_cflag == 0)
- termios = *state->info->tty->termios;
+ if (state->info && state->info->port.tty && termios.c_cflag == 0)
+ termios = *state->info->port.tty->termios;
uart_change_pm(state, 0);
port->ops->set_termios(port, &termios, NULL);
@@ -2519,8 +2525,8 @@
tty_unregister_device(drv->tty_driver, port->line);
info = state->info;
- if (info && info->tty)
- tty_vhangup(info->tty);
+ if (info && info->port.tty)
+ tty_vhangup(info->port.tty);
/*
* All users of this port should now be disconnected from
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 8721afe..0edbc5d 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -108,7 +108,7 @@
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned int status, ch, lsr, flg, max_count = 256;
status = UART_GET_LSR(port); /* clears pending LSR interrupts */
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index eb18d42..cb49a5a 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -137,7 +137,7 @@
static void lh7a40xuart_rx_chars (struct uart_port* port)
{
- struct tty_struct* tty = port->info->tty;
+ struct tty_struct* tty = port->info->port.tty;
int cbRxMax = 256; /* (Gross) limit on receive */
unsigned int data; /* Received data and status */
unsigned int flag;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index ce6ee92..208e42b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -521,7 +521,7 @@
static inline void sci_receive_chars(struct uart_port *port)
{
struct sci_port *sci_port = (struct sci_port *)port;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
int i, count, copied = 0;
unsigned short status;
unsigned char flag;
@@ -642,7 +642,7 @@
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
if (status & SCxSR_ORER(port)) {
/* overrun error */
@@ -692,7 +692,7 @@
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
struct sci_port *s = &sci_ports[port->line];
if (uart_handle_break(port))
@@ -762,7 +762,7 @@
} else {
#if defined(SCIF_ORER)
if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
sci_out(port, SCLSR, 0);
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 019da2e..b73e3c0 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -471,7 +471,7 @@
if (port->sc_port.info) {
/* The serial_core stuffs are initilized, use them */
- tty = port->sc_port.info->tty;
+ tty = port->sc_port.info->port.tty;
}
else {
/* Not registered yet - can't pass to tty layer. */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 2847336..aeeec55 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -185,7 +185,7 @@
struct tty_struct *tty = NULL;
if (port->info != NULL) /* Unopened serial console */
- tty = port->info->tty;
+ tty = port->info->port.tty;
if (sunhv_ops->receive_chars(port, tty))
sun_do_break();
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 9ff5b38..15ee497 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -118,7 +118,7 @@
int i;
if (up->port.info != NULL) /* Unopened serial console */
- tty = up->port.info->tty;
+ tty = up->port.info->port.tty;
/* Read number of BYTES (Character + Status) available. */
if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 03806a9..e24e682 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1,4 +1,4 @@
-/* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
+/*
* su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
@@ -311,7 +311,7 @@
static struct tty_struct *
receive_chars(struct uart_sunsu_port *up, unsigned char *status)
{
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned char ch, flag;
int max_count = 256;
int saw_console_brk = 0;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 7e9fa5e..0f3d69b 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -329,8 +329,8 @@
tty = NULL;
if (up->port.info != NULL && /* Unopened serial console */
- up->port.info->tty != NULL) /* Keyboard || mouse */
- tty = up->port.info->tty;
+ up->port.info->port.tty != NULL) /* Keyboard || mouse */
+ tty = up->port.info->port.tty;
for (;;) {
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index b51c242..6a3f8fb 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -75,7 +75,7 @@
static int ulite_receive(struct uart_port *port, int stat)
{
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned char ch = 0;
char flag = TTY_NORMAL;
@@ -162,7 +162,7 @@
busy |= ulite_transmit(port, stat);
} while (busy);
- tty_flip_buffer_push(port->info->tty);
+ tty_flip_buffer_push(port->info->port.tty);
return IRQ_HANDLED;
}
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 566a8b4..5c5d18d 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -466,7 +466,7 @@
int i;
unsigned char ch, *cp;
struct uart_port *port = &qe_port->port;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
struct qe_bd *bdp;
u16 status;
unsigned int flg;
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
index dd98aca..5acf061 100644
--- a/drivers/serial/v850e_uart.c
+++ b/drivers/serial/v850e_uart.c
@@ -300,8 +300,8 @@
port->icount.rx++;
- tty_insert_flip_char (port->info->tty, ch, ch_stat);
- tty_schedule_flip (port->info->tty);
+ tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
+ tty_schedule_flip (port->info->port.tty);
return IRQ_HANDLED;
}
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index bb6ce6b..0573f3b 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -318,7 +318,7 @@
char flag;
int max_count = RX_MAX_COUNT;
- tty = port->info->tty;
+ tty = port->info->port.tty;
lsr = *status;
do {
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index 65f1294..bd45b62 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -602,7 +602,7 @@
uart_insert_char(uport, status, Rx_OVR, ch, flag);
}
- tty_flip_buffer_push(uport->info->tty);
+ tty_flip_buffer_push(uport->info->port.tty);
}
static void zs_raw_transmit_chars(struct zs_port *zport)
diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 21f490f..d153946 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -136,54 +136,6 @@
.release = seq_release,
};
-static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
-{
- return (*pos < NR_LDISCS) ? pos : NULL;
-}
-
-static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
-{
- (*pos)++;
- return (*pos < NR_LDISCS) ? pos : NULL;
-}
-
-static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
-{
-}
-
-static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
-{
- int i = *(loff_t *)v;
- struct tty_ldisc *ld;
-
- ld = tty_ldisc_get(i);
- if (ld == NULL)
- return 0;
- seq_printf(m, "%-10s %2d\n", ld->name ? ld->name : "???", i);
- tty_ldisc_put(i);
- return 0;
-}
-
-static const struct seq_operations tty_ldiscs_seq_ops = {
- .start = tty_ldiscs_seq_start,
- .next = tty_ldiscs_seq_next,
- .stop = tty_ldiscs_seq_stop,
- .show = tty_ldiscs_seq_show,
-};
-
-static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &tty_ldiscs_seq_ops);
-}
-
-static const struct file_operations tty_ldiscs_proc_fops = {
- .owner = THIS_MODULE,
- .open = proc_tty_ldiscs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
/*
* This function is called by tty_register_driver() to handle
* registering the driver's /proc handler into /proc/tty/driver/<foo>
diff --git a/include/asm-avr32/ioctls.h b/include/asm-avr32/ioctls.h
index 0500426..0cf2c0a 100644
--- a/include/asm-avr32/ioctls.h
+++ b/include/asm-avr32/ioctls.h
@@ -47,6 +47,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-frv/ioctls.h b/include/asm-frv/ioctls.h
index 341c7dd..d0c30e3 100644
--- a/include/asm-frv/ioctls.h
+++ b/include/asm-frv/ioctls.h
@@ -47,6 +47,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-frv/termbits.h b/include/asm-frv/termbits.h
index 74851b4..5568492 100644
--- a/include/asm-frv/termbits.h
+++ b/include/asm-frv/termbits.h
@@ -141,6 +141,7 @@
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -156,11 +157,13 @@
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* Input baud rate */
#define CTVB 004000000000 /* VisioBraille Terminal flow control */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 504cb2c..2d3d1e0 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -550,11 +550,11 @@
struct cyclades_port {
int magic;
+ struct tty_port port;
struct cyclades_card *card;
int line;
int flags; /* defined in tty.h */
int type; /* UART type */
- struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
@@ -567,13 +567,8 @@
int chip_rev;
int custom_divisor;
u8 x_char; /* to be pushed out ASAP */
- int close_delay;
- unsigned short closing_wait;
- int count; /* # of fd on device */
int breakon;
int breakoff;
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
@@ -583,16 +578,14 @@
struct cyclades_monitor mon;
struct cyclades_idle_stats idle_stats;
struct cyclades_icount icount;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
struct completion shutdown_wait;
wait_queue_head_t delta_msr_wait;
int throttle;
};
#define CLOSING_WAIT_DELAY 30*HZ
-#define CY_CLOSING_WAIT_NONE 65535
-#define CY_CLOSING_WAIT_INF 0
+#define CY_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE
+#define CY_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF
#define CyMAX_CHIPS_PER_CARD 8
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
index 1108336..4cc9139 100644
--- a/include/linux/generic_serial.h
+++ b/include/linux/generic_serial.h
@@ -14,6 +14,7 @@
#ifdef __KERNEL__
#include <linux/mutex.h>
+#include <linux/tty.h>
struct real_driver {
void (*disable_tx_interrupts) (void *);
@@ -33,17 +34,12 @@
struct gs_port {
int magic;
+ struct tty_port port;
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
struct mutex port_write_mutex;
- int flags;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- int count;
- int blocked_open;
- struct tty_struct *tty;
unsigned long event;
unsigned short closing_wait;
int close_delay;
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
index 2177ee5..940aeb5 100644
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -76,11 +76,10 @@
struct esp_struct {
int magic;
+ struct tty_port port;
spinlock_t lock;
- int port;
+ int io_port;
int irq;
- int flags; /* defined in tty.h */
- struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
@@ -93,14 +92,10 @@
int MCR; /* Modem control register */
unsigned long last_active;
int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
wait_queue_head_t delta_msr_wait;
wait_queue_head_t break_wait;
struct async_icount icount; /* kernel counters for the 4 input interrupts */
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
index 5a84fe9..0d18407 100644
--- a/include/linux/istallion.h
+++ b/include/linux/istallion.h
@@ -51,25 +51,21 @@
*/
struct stliport {
unsigned long magic;
+ struct tty_port port;
unsigned int portnr;
unsigned int panelnr;
unsigned int brdnr;
unsigned long state;
unsigned int devnr;
- int flags;
int baud_base;
int custom_divisor;
int close_delay;
int closing_wait;
- int refcount;
int openwaitcnt;
int rc;
int argsize;
void *argp;
unsigned int rxmarkmsk;
- struct tty_struct *tty;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
wait_queue_head_t raw_wait;
struct asysigs asig;
unsigned long addr;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d8f31de..f3a1c0e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -190,6 +190,7 @@
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
+ void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
void (*set_ldisc)(struct uart_port *);
@@ -343,13 +344,15 @@
* stuff here.
*/
struct uart_info {
- struct tty_struct *tty;
+ struct tty_port port;
struct circ_buf xmit;
uif_t flags;
/*
* Definitions for info->flags. These are _private_ to serial_core, and
* are specific to this structure. They may be queried by low level drivers.
+ *
+ * FIXME: use the ASY_ definitions
*/
#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
@@ -357,11 +360,7 @@
#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
#define UIF_SUSPENDED ((__force uif_t) (1 << 30))
- int blocked_open;
-
struct tasklet_struct tlet;
-
- wait_queue_head_t open_wait;
wait_queue_head_t delta_msr_wait;
};
@@ -438,8 +437,8 @@
#define uart_circ_chars_free(circ) \
(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-#define uart_tx_stopped(port) \
- ((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+#define uart_tx_stopped(portp) \
+ ((portp)->info->port.tty->stopped || (portp)->info->port.tty->hw_stopped)
/*
* The following are helper functions for the low level drivers.
@@ -450,7 +449,7 @@
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, port->info ? port->info->tty : NULL);
+ handle_sysrq(ch, port->info ? port->info->port.tty : NULL);
port->sysrq = 0;
return 1;
}
@@ -479,7 +478,7 @@
}
#endif
if (port->flags & UPF_SAK)
- do_SAK(info->tty);
+ do_SAK(info->port.tty);
return 0;
}
@@ -502,9 +501,9 @@
if (info->flags & UIF_CHECK_CD) {
if (status)
- wake_up_interruptible(&info->open_wait);
- else if (info->tty)
- tty_hangup(info->tty);
+ wake_up_interruptible(&info->port.open_wait);
+ else if (info->port.tty)
+ tty_hangup(info->port.tty);
}
}
@@ -517,7 +516,7 @@
uart_handle_cts_change(struct uart_port *port, unsigned int status)
{
struct uart_info *info = port->info;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
port->icount.cts++;
@@ -543,7 +542,7 @@
uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag)
{
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
tty_insert_flip_char(tty, ch, flag);
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
index 0424d75..336af33c 100644
--- a/include/linux/stallion.h
+++ b/include/linux/stallion.h
@@ -69,6 +69,7 @@
*/
struct stlport {
unsigned long magic;
+ struct tty_port port;
unsigned int portnr;
unsigned int panelnr;
unsigned int brdnr;
@@ -76,12 +77,10 @@
int uartaddr;
unsigned int pagenr;
unsigned long istate;
- int flags;
int baud_base;
int custom_divisor;
int close_delay;
int closing_wait;
- int refcount;
int openwaitcnt;
int brklen;
unsigned int sigs;
@@ -92,9 +91,6 @@
unsigned long clk;
unsigned long hwid;
void *uartp;
- struct tty_struct *tty;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
comstats_t stats;
struct stlrq tx;
};
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 324a3b2..4e58330 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -71,7 +71,8 @@
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct tty_buffer *free; /* Free queue head */
- int memory_used; /* Buffer space used excluding free queue */
+ int memory_used; /* Buffer space used excluding
+ free queue */
};
/*
* When a break, frame error, or parity error happens, these codes are
@@ -101,71 +102,96 @@
#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-#define _I_FLAG(tty,f) ((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty,f) ((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty,f) ((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty,f) ((tty)->termios->c_lflag & (f))
+#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f))
+#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f))
+#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f))
+#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f))
-#define I_IGNBRK(tty) _I_FLAG((tty),IGNBRK)
-#define I_BRKINT(tty) _I_FLAG((tty),BRKINT)
-#define I_IGNPAR(tty) _I_FLAG((tty),IGNPAR)
-#define I_PARMRK(tty) _I_FLAG((tty),PARMRK)
-#define I_INPCK(tty) _I_FLAG((tty),INPCK)
-#define I_ISTRIP(tty) _I_FLAG((tty),ISTRIP)
-#define I_INLCR(tty) _I_FLAG((tty),INLCR)
-#define I_IGNCR(tty) _I_FLAG((tty),IGNCR)
-#define I_ICRNL(tty) _I_FLAG((tty),ICRNL)
-#define I_IUCLC(tty) _I_FLAG((tty),IUCLC)
-#define I_IXON(tty) _I_FLAG((tty),IXON)
-#define I_IXANY(tty) _I_FLAG((tty),IXANY)
-#define I_IXOFF(tty) _I_FLAG((tty),IXOFF)
-#define I_IMAXBEL(tty) _I_FLAG((tty),IMAXBEL)
-#define I_IUTF8(tty) _I_FLAG((tty),IUTF8)
+#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
+#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
+#define I_IGNPAR(tty) _I_FLAG((tty), IGNPAR)
+#define I_PARMRK(tty) _I_FLAG((tty), PARMRK)
+#define I_INPCK(tty) _I_FLAG((tty), INPCK)
+#define I_ISTRIP(tty) _I_FLAG((tty), ISTRIP)
+#define I_INLCR(tty) _I_FLAG((tty), INLCR)
+#define I_IGNCR(tty) _I_FLAG((tty), IGNCR)
+#define I_ICRNL(tty) _I_FLAG((tty), ICRNL)
+#define I_IUCLC(tty) _I_FLAG((tty), IUCLC)
+#define I_IXON(tty) _I_FLAG((tty), IXON)
+#define I_IXANY(tty) _I_FLAG((tty), IXANY)
+#define I_IXOFF(tty) _I_FLAG((tty), IXOFF)
+#define I_IMAXBEL(tty) _I_FLAG((tty), IMAXBEL)
+#define I_IUTF8(tty) _I_FLAG((tty), IUTF8)
-#define O_OPOST(tty) _O_FLAG((tty),OPOST)
-#define O_OLCUC(tty) _O_FLAG((tty),OLCUC)
-#define O_ONLCR(tty) _O_FLAG((tty),ONLCR)
-#define O_OCRNL(tty) _O_FLAG((tty),OCRNL)
-#define O_ONOCR(tty) _O_FLAG((tty),ONOCR)
-#define O_ONLRET(tty) _O_FLAG((tty),ONLRET)
-#define O_OFILL(tty) _O_FLAG((tty),OFILL)
-#define O_OFDEL(tty) _O_FLAG((tty),OFDEL)
-#define O_NLDLY(tty) _O_FLAG((tty),NLDLY)
-#define O_CRDLY(tty) _O_FLAG((tty),CRDLY)
-#define O_TABDLY(tty) _O_FLAG((tty),TABDLY)
-#define O_BSDLY(tty) _O_FLAG((tty),BSDLY)
-#define O_VTDLY(tty) _O_FLAG((tty),VTDLY)
-#define O_FFDLY(tty) _O_FLAG((tty),FFDLY)
+#define O_OPOST(tty) _O_FLAG((tty), OPOST)
+#define O_OLCUC(tty) _O_FLAG((tty), OLCUC)
+#define O_ONLCR(tty) _O_FLAG((tty), ONLCR)
+#define O_OCRNL(tty) _O_FLAG((tty), OCRNL)
+#define O_ONOCR(tty) _O_FLAG((tty), ONOCR)
+#define O_ONLRET(tty) _O_FLAG((tty), ONLRET)
+#define O_OFILL(tty) _O_FLAG((tty), OFILL)
+#define O_OFDEL(tty) _O_FLAG((tty), OFDEL)
+#define O_NLDLY(tty) _O_FLAG((tty), NLDLY)
+#define O_CRDLY(tty) _O_FLAG((tty), CRDLY)
+#define O_TABDLY(tty) _O_FLAG((tty), TABDLY)
+#define O_BSDLY(tty) _O_FLAG((tty), BSDLY)
+#define O_VTDLY(tty) _O_FLAG((tty), VTDLY)
+#define O_FFDLY(tty) _O_FLAG((tty), FFDLY)
-#define C_BAUD(tty) _C_FLAG((tty),CBAUD)
-#define C_CSIZE(tty) _C_FLAG((tty),CSIZE)
-#define C_CSTOPB(tty) _C_FLAG((tty),CSTOPB)
-#define C_CREAD(tty) _C_FLAG((tty),CREAD)
-#define C_PARENB(tty) _C_FLAG((tty),PARENB)
-#define C_PARODD(tty) _C_FLAG((tty),PARODD)
-#define C_HUPCL(tty) _C_FLAG((tty),HUPCL)
-#define C_CLOCAL(tty) _C_FLAG((tty),CLOCAL)
-#define C_CIBAUD(tty) _C_FLAG((tty),CIBAUD)
-#define C_CRTSCTS(tty) _C_FLAG((tty),CRTSCTS)
+#define C_BAUD(tty) _C_FLAG((tty), CBAUD)
+#define C_CSIZE(tty) _C_FLAG((tty), CSIZE)
+#define C_CSTOPB(tty) _C_FLAG((tty), CSTOPB)
+#define C_CREAD(tty) _C_FLAG((tty), CREAD)
+#define C_PARENB(tty) _C_FLAG((tty), PARENB)
+#define C_PARODD(tty) _C_FLAG((tty), PARODD)
+#define C_HUPCL(tty) _C_FLAG((tty), HUPCL)
+#define C_CLOCAL(tty) _C_FLAG((tty), CLOCAL)
+#define C_CIBAUD(tty) _C_FLAG((tty), CIBAUD)
+#define C_CRTSCTS(tty) _C_FLAG((tty), CRTSCTS)
-#define L_ISIG(tty) _L_FLAG((tty),ISIG)
-#define L_ICANON(tty) _L_FLAG((tty),ICANON)
-#define L_XCASE(tty) _L_FLAG((tty),XCASE)
-#define L_ECHO(tty) _L_FLAG((tty),ECHO)
-#define L_ECHOE(tty) _L_FLAG((tty),ECHOE)
-#define L_ECHOK(tty) _L_FLAG((tty),ECHOK)
-#define L_ECHONL(tty) _L_FLAG((tty),ECHONL)
-#define L_NOFLSH(tty) _L_FLAG((tty),NOFLSH)
-#define L_TOSTOP(tty) _L_FLAG((tty),TOSTOP)
-#define L_ECHOCTL(tty) _L_FLAG((tty),ECHOCTL)
-#define L_ECHOPRT(tty) _L_FLAG((tty),ECHOPRT)
-#define L_ECHOKE(tty) _L_FLAG((tty),ECHOKE)
-#define L_FLUSHO(tty) _L_FLAG((tty),FLUSHO)
-#define L_PENDIN(tty) _L_FLAG((tty),PENDIN)
-#define L_IEXTEN(tty) _L_FLAG((tty),IEXTEN)
+#define L_ISIG(tty) _L_FLAG((tty), ISIG)
+#define L_ICANON(tty) _L_FLAG((tty), ICANON)
+#define L_XCASE(tty) _L_FLAG((tty), XCASE)
+#define L_ECHO(tty) _L_FLAG((tty), ECHO)
+#define L_ECHOE(tty) _L_FLAG((tty), ECHOE)
+#define L_ECHOK(tty) _L_FLAG((tty), ECHOK)
+#define L_ECHONL(tty) _L_FLAG((tty), ECHONL)
+#define L_NOFLSH(tty) _L_FLAG((tty), NOFLSH)
+#define L_TOSTOP(tty) _L_FLAG((tty), TOSTOP)
+#define L_ECHOCTL(tty) _L_FLAG((tty), ECHOCTL)
+#define L_ECHOPRT(tty) _L_FLAG((tty), ECHOPRT)
+#define L_ECHOKE(tty) _L_FLAG((tty), ECHOKE)
+#define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO)
+#define L_PENDIN(tty) _L_FLAG((tty), PENDIN)
+#define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN)
struct device;
struct signal_struct;
+
+/*
+ * Port level information. Each device keeps its own port level information
+ * so provide a common structure for those ports wanting to use common support
+ * routines.
+ *
+ * The tty port has a different lifetime to the tty so must be kept apart.
+ * In addition be careful as tty -> port mappings are valid for the life
+ * of the tty object but in many cases port -> tty mappings are valid only
+ * until a hangup so don't use the wrong path.
+ */
+
+struct tty_port {
+ struct tty_struct *tty; /* Back pointer */
+ int blocked_open; /* Waiting to open */
+ int count; /* Usage count */
+ wait_queue_head_t open_wait; /* Open waiters */
+ wait_queue_head_t close_wait; /* Close waiters */
+ unsigned long flags; /* TTY flags ASY_*/
+ struct mutex mutex; /* Locking */
+ unsigned char *xmit_buf; /* Optional buffer */
+ int close_delay; /* Close port delay */
+ int closing_wait; /* Delay for output */
+};
+
/*
* Where all of the state associated with a tty is kept while the tty
* is open. Since the termios state should be kept even if the tty
@@ -185,6 +211,7 @@
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
+ /* The ldisc objects are protected by tty_ldisc_lock at the moment */
struct tty_ldisc ldisc;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
@@ -213,7 +240,7 @@
struct list_head tty_files;
#define N_TTY_BUF_SIZE 4096
-
+
/*
* The following is data for the N_TTY line discipline. For
* historical reasons, this is included in the tty structure.
@@ -241,6 +268,7 @@
spinlock_t read_lock;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
+ struct tty_port *port;
};
/* tty magic number */
@@ -248,14 +276,14 @@
/*
* These bits are used in the flags field of the tty structure.
- *
+ *
* So that interrupts won't be able to mess up the queues,
* copy_to_cooked must be atomic with respect to itself, as must
* tty->write. Thus, you must use the inline functions set_bit() and
* clear_bit() to make things atomic.
*/
#define TTY_THROTTLED 0 /* Call unthrottle() at threshold min */
-#define TTY_IO_ERROR 1 /* Canse an I/O error (may be no ldisc too) */
+#define TTY_IO_ERROR 1 /* Cause an I/O error (may be no ldisc too) */
#define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DEBUG 4 /* Debugging */
@@ -285,11 +313,11 @@
extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
const char *routine);
extern char *tty_name(struct tty_struct *tty, char *buf);
-extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
-extern int tty_check_change(struct tty_struct * tty);
-extern void stop_tty(struct tty_struct * tty);
-extern void start_tty(struct tty_struct * tty);
-extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
+extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
+extern int tty_check_change(struct tty_struct *tty);
+extern void stop_tty(struct tty_struct *tty);
+extern void start_tty(struct tty_struct *tty);
+extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
@@ -310,10 +338,10 @@
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
-extern void tty_hangup(struct tty_struct * tty);
-extern void tty_vhangup(struct tty_struct * tty);
+extern void tty_hangup(struct tty_struct *tty);
+extern void tty_vhangup(struct tty_struct *tty);
extern void tty_unhangup(struct file *filp);
-extern int tty_hung_up_p(struct file * filp);
+extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);
@@ -322,17 +350,17 @@
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
-extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud);
-extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud);
+extern void tty_termios_encode_baud_rate(struct ktermios *termios,
+ speed_t ibaud, speed_t obaud);
+extern void tty_encode_baud_rate(struct tty_struct *tty,
+ speed_t ibaud, speed_t obaud);
extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
-
-extern struct tty_ldisc *tty_ldisc_get(int);
-extern void tty_ldisc_put(int);
+extern const struct file_operations tty_ldiscs_proc_fops;
extern void tty_wakeup(struct tty_struct *tty);
extern void tty_ldisc_flush(struct tty_struct *tty);
@@ -351,10 +379,14 @@
extern int tty_write_lock(struct tty_struct *tty, int ndelay);
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
+extern void tty_port_init(struct tty_port *port);
+extern int tty_port_alloc_xmit_buf(struct tty_port *port);
+extern void tty_port_free_xmit_buf(struct tty_port *port);
+
/* n_tty.c */
-extern struct tty_ldisc tty_ldisc_N_TTY;
+extern struct tty_ldisc_ops tty_ldisc_N_TTY;
/* tty_audit.c */
#ifdef CONFIG_AUDIT
@@ -363,7 +395,8 @@
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_push(struct tty_struct *tty);
-extern void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid);
+extern void tty_audit_push_task(struct task_struct *tsk,
+ uid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
unsigned char *data, size_t size)
@@ -378,19 +411,20 @@
static inline void tty_audit_push(struct tty_struct *tty)
{
}
-static inline void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid)
+static inline void tty_audit_push_task(struct task_struct *tsk,
+ uid_t loginuid, u32 sessionid)
{
}
#endif
/* tty_ioctl.c */
-extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+extern int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
/* serial.c */
extern void serial_console_init(void);
-
+
/* pcxx.c */
extern int pcxe_open(struct tty_struct *tty, struct file *filp);
@@ -401,7 +435,7 @@
/* vt.c */
-extern int vt_ioctl(struct tty_struct *tty, struct file * file,
+extern int vt_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
#endif /* __KERNEL__ */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 6226504..40f38d8 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -104,7 +104,7 @@
#include <linux/fs.h>
#include <linux/wait.h>
-struct tty_ldisc {
+struct tty_ldisc_ops {
int magic;
char *name;
int num;
@@ -142,6 +142,11 @@
int refcount;
};
+struct tty_ldisc {
+ struct tty_ldisc_ops *ops;
+ int refcount;
+};
+
#define TTY_LDISC_MAGIC 0x5403
#define LDISC_FLAG_DEFINED 0x00000001
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c919187..0a387f2 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -617,14 +617,7 @@
return;
BT_DBG("dev %p tty %p", dev, tty);
-
- if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
-
- wake_up_interruptible(&tty->write_wait);
-#ifdef SERIAL_HAVE_POLL_WAIT
- wake_up_interruptible(&tty->poll_wait);
-#endif
+ tty_wakeup(tty);
}
static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
@@ -1005,9 +998,7 @@
return;
skb_queue_purge(&dev->dlc->tx_queue);
-
- if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && tty->ldisc.write_wakeup)
- tty->ldisc.write_wakeup(tty);
+ tty_wakeup(tty);
}
static void rfcomm_tty_send_xchar(struct tty_struct *tty, char ch)
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 76c3057..e4e2cae 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -650,12 +650,7 @@
}
/* Check if user (still) wants to be waken up */
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- {
- (tty->ldisc.write_wakeup)(tty);
- }
- wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
}
/*
@@ -1141,6 +1136,7 @@
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_ldisc *ld;
IRDA_DEBUG(2, "%s()\n", __func__ );
@@ -1173,7 +1169,11 @@
* involve the flip buffers, since we are not running in an interrupt
* handler
*/
- self->tty->ldisc.receive_buf(self->tty, skb->data, NULL, skb->len);
+
+ ld = tty_ldisc_ref(self->tty);
+ if (ld)
+ ld->ops->receive_buf(self->tty, skb->data, NULL, skb->len);
+ tty_ldisc_deref(ld);
/* No need to kfree_skb - see ircomm_ttp_data_indication() */