| /* | 
 |  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com) | 
 |  * Licensed under the GPL | 
 |  */ | 
 |  | 
 | #include <stdlib.h> | 
 | #include <unistd.h> | 
 | #include <errno.h> | 
 | #include <sched.h> | 
 | #include <signal.h> | 
 | #include <termios.h> | 
 | #include <sys/ioctl.h> | 
 | #include "chan_user.h" | 
 | #include "kern_constants.h" | 
 | #include "os.h" | 
 | #include "um_malloc.h" | 
 | #include "user.h" | 
 |  | 
 | void generic_close(int fd, void *unused) | 
 | { | 
 | 	close(fd); | 
 | } | 
 |  | 
 | int generic_read(int fd, char *c_out, void *unused) | 
 | { | 
 | 	int n; | 
 |  | 
 | 	n = read(fd, c_out, sizeof(*c_out)); | 
 | 	if (n > 0) | 
 | 		return n; | 
 | 	else if (errno == EAGAIN) | 
 | 		return 0; | 
 | 	else if (n == 0) | 
 | 		return -EIO; | 
 | 	return -errno; | 
 | } | 
 |  | 
 | /* XXX Trivial wrapper around write */ | 
 |  | 
 | int generic_write(int fd, const char *buf, int n, void *unused) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = write(fd, buf, n); | 
 | 	if (err > 0) | 
 | 		return err; | 
 | 	else if (errno == EAGAIN) | 
 | 		return 0; | 
 | 	else if (err == 0) | 
 | 		return -EIO; | 
 | 	return -errno; | 
 | } | 
 |  | 
 | int generic_window_size(int fd, void *unused, unsigned short *rows_out, | 
 | 			unsigned short *cols_out) | 
 | { | 
 | 	struct winsize size; | 
 | 	int ret; | 
 |  | 
 | 	if (ioctl(fd, TIOCGWINSZ, &size) < 0) | 
 | 		return -errno; | 
 |  | 
 | 	ret = ((*rows_out != size.ws_row) || (*cols_out != size.ws_col)); | 
 |  | 
 | 	*rows_out = size.ws_row; | 
 | 	*cols_out = size.ws_col; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | void generic_free(void *data) | 
 | { | 
 | 	kfree(data); | 
 | } | 
 |  | 
 | int generic_console_write(int fd, const char *buf, int n) | 
 | { | 
 | 	sigset_t old, no_sigio; | 
 | 	struct termios save, new; | 
 | 	int err; | 
 |  | 
 | 	if (isatty(fd)) { | 
 | 		sigemptyset(&no_sigio); | 
 | 		sigaddset(&no_sigio, SIGIO); | 
 | 		if (sigprocmask(SIG_BLOCK, &no_sigio, &old)) | 
 | 			goto error; | 
 |  | 
 | 		CATCH_EINTR(err = tcgetattr(fd, &save)); | 
 | 		if (err) | 
 | 			goto error; | 
 | 		new = save; | 
 | 		/* | 
 | 		 * The terminal becomes a bit less raw, to handle \n also as | 
 | 		 * "Carriage Return", not only as "New Line". Otherwise, the new | 
 | 		 * line won't start at the first column. | 
 | 		 */ | 
 | 		new.c_oflag |= OPOST; | 
 | 		CATCH_EINTR(err = tcsetattr(fd, TCSAFLUSH, &new)); | 
 | 		if (err) | 
 | 			goto error; | 
 | 	} | 
 | 	err = generic_write(fd, buf, n, NULL); | 
 | 	/* | 
 | 	 * Restore raw mode, in any case; we *must* ignore any error apart | 
 | 	 * EINTR, except for debug. | 
 | 	 */ | 
 | 	if (isatty(fd)) { | 
 | 		CATCH_EINTR(tcsetattr(fd, TCSAFLUSH, &save)); | 
 | 		sigprocmask(SIG_SETMASK, &old, NULL); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | error: | 
 | 	return -errno; | 
 | } | 
 |  | 
 | /* | 
 |  * UML SIGWINCH handling | 
 |  * | 
 |  * The point of this is to handle SIGWINCH on consoles which have host | 
 |  * ttys and relay them inside UML to whatever might be running on the | 
 |  * console and cares about the window size (since SIGWINCH notifies | 
 |  * about terminal size changes). | 
 |  * | 
 |  * So, we have a separate thread for each host tty attached to a UML | 
 |  * device (side-issue - I'm annoyed that one thread can't have | 
 |  * multiple controlling ttys for the purpose of handling SIGWINCH, but | 
 |  * I imagine there are other reasons that doesn't make any sense). | 
 |  * | 
 |  * SIGWINCH can't be received synchronously, so you have to set up to | 
 |  * receive it as a signal.  That being the case, if you are going to | 
 |  * wait for it, it is convenient to sit in sigsuspend() and wait for | 
 |  * the signal to bounce you out of it (see below for how we make sure | 
 |  * to exit only on SIGWINCH). | 
 |  */ | 
 |  | 
 | static void winch_handler(int sig) | 
 | { | 
 | } | 
 |  | 
 | struct winch_data { | 
 | 	int pty_fd; | 
 | 	int pipe_fd; | 
 | }; | 
 |  | 
 | static int winch_thread(void *arg) | 
 | { | 
 | 	struct winch_data *data = arg; | 
 | 	sigset_t sigs; | 
 | 	int pty_fd, pipe_fd; | 
 | 	int count; | 
 | 	char c = 1; | 
 |  | 
 | 	pty_fd = data->pty_fd; | 
 | 	pipe_fd = data->pipe_fd; | 
 | 	count = write(pipe_fd, &c, sizeof(c)); | 
 | 	if (count != sizeof(c)) | 
 | 		printk(UM_KERN_ERR "winch_thread : failed to write " | 
 | 		       "synchronization byte, err = %d\n", -count); | 
 |  | 
 | 	/* | 
 | 	 * We are not using SIG_IGN on purpose, so don't fix it as I thought to | 
 | 	 * do! If using SIG_IGN, the sigsuspend() call below would not stop on | 
 | 	 * SIGWINCH. | 
 | 	 */ | 
 |  | 
 | 	signal(SIGWINCH, winch_handler); | 
 | 	sigfillset(&sigs); | 
 | 	/* Block all signals possible. */ | 
 | 	if (sigprocmask(SIG_SETMASK, &sigs, NULL) < 0) { | 
 | 		printk(UM_KERN_ERR "winch_thread : sigprocmask failed, " | 
 | 		       "errno = %d\n", errno); | 
 | 		exit(1); | 
 | 	} | 
 | 	/* In sigsuspend(), block anything else than SIGWINCH. */ | 
 | 	sigdelset(&sigs, SIGWINCH); | 
 |  | 
 | 	if (setsid() < 0) { | 
 | 		printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n", | 
 | 		       errno); | 
 | 		exit(1); | 
 | 	} | 
 |  | 
 | 	if (ioctl(pty_fd, TIOCSCTTY, 0) < 0) { | 
 | 		printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on " | 
 | 		       "fd %d err = %d\n", pty_fd, errno); | 
 | 		exit(1); | 
 | 	} | 
 |  | 
 | 	if (tcsetpgrp(pty_fd, os_getpid()) < 0) { | 
 | 		printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on " | 
 | 		       "fd %d err = %d\n", pty_fd, errno); | 
 | 		exit(1); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * These are synchronization calls between various UML threads on the | 
 | 	 * host - since they are not different kernel threads, we cannot use | 
 | 	 * kernel semaphores. We don't use SysV semaphores because they are | 
 | 	 * persistent. | 
 | 	 */ | 
 | 	count = read(pipe_fd, &c, sizeof(c)); | 
 | 	if (count != sizeof(c)) | 
 | 		printk(UM_KERN_ERR "winch_thread : failed to read " | 
 | 		       "synchronization byte, err = %d\n", errno); | 
 |  | 
 | 	while(1) { | 
 | 		/* | 
 | 		 * This will be interrupted by SIGWINCH only, since | 
 | 		 * other signals are blocked. | 
 | 		 */ | 
 | 		sigsuspend(&sigs); | 
 |  | 
 | 		count = write(pipe_fd, &c, sizeof(c)); | 
 | 		if (count != sizeof(c)) | 
 | 			printk(UM_KERN_ERR "winch_thread : write failed, " | 
 | 			       "err = %d\n", errno); | 
 | 	} | 
 | } | 
 |  | 
 | static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out, | 
 | 		       unsigned long *stack_out) | 
 | { | 
 | 	struct winch_data data; | 
 | 	int fds[2], n, err; | 
 | 	char c; | 
 |  | 
 | 	err = os_pipe(fds, 1, 1); | 
 | 	if (err < 0) { | 
 | 		printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n", | 
 | 		       -err); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	data = ((struct winch_data) { .pty_fd 		= fd, | 
 | 				      .pipe_fd 		= fds[1] } ); | 
 | 	/* | 
 | 	 * CLONE_FILES so this thread doesn't hold open files which are open | 
 | 	 * now, but later closed in a different thread.  This is a | 
 | 	 * problem with /dev/net/tun, which if held open by this | 
 | 	 * thread, prevents the TUN/TAP device from being reused. | 
 | 	 */ | 
 | 	err = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out); | 
 | 	if (err < 0) { | 
 | 		printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n", | 
 | 		       -err); | 
 | 		goto out_close; | 
 | 	} | 
 |  | 
 | 	*fd_out = fds[0]; | 
 | 	n = read(fds[0], &c, sizeof(c)); | 
 | 	if (n != sizeof(c)) { | 
 | 		printk(UM_KERN_ERR "winch_tramp : failed to read " | 
 | 		       "synchronization byte\n"); | 
 | 		printk(UM_KERN_ERR "read failed, err = %d\n", errno); | 
 | 		printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd); | 
 | 		err = -EINVAL; | 
 | 		goto out_close; | 
 | 	} | 
 |  | 
 | 	if (os_set_fd_block(*fd_out, 0)) { | 
 | 		printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd " | 
 | 		       "non-blocking.\n"); | 
 | 		goto out_close; | 
 | 	} | 
 |  | 
 | 	return err; | 
 |  | 
 |  out_close: | 
 | 	close(fds[1]); | 
 | 	close(fds[0]); | 
 |  out: | 
 | 	return err; | 
 | } | 
 |  | 
 | void register_winch(int fd, struct tty_struct *tty) | 
 | { | 
 | 	unsigned long stack; | 
 | 	int pid, thread, count, thread_fd = -1; | 
 | 	char c = 1; | 
 |  | 
 | 	if (!isatty(fd)) | 
 | 		return; | 
 |  | 
 | 	pid = tcgetpgrp(fd); | 
 | 	if (!is_skas_winch(pid, fd, tty) && (pid == -1)) { | 
 | 		thread = winch_tramp(fd, tty, &thread_fd, &stack); | 
 | 		if (thread < 0) | 
 | 			return; | 
 |  | 
 | 		register_winch_irq(thread_fd, fd, thread, tty, stack); | 
 |  | 
 | 		count = write(thread_fd, &c, sizeof(c)); | 
 | 		if (count != sizeof(c)) | 
 | 			printk(UM_KERN_ERR "register_winch : failed to write " | 
 | 			       "synchronization byte, err = %d\n", errno); | 
 | 	} | 
 | } |