|  | /* | 
|  | * Aic7xxx SCSI host adapter firmware asssembler | 
|  | * | 
|  | * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. | 
|  | * Copyright (c) 2001, 2002 Adaptec Inc. | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | * | 
|  | * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $ | 
|  | * | 
|  | * $FreeBSD$ | 
|  | */ | 
|  | #include <sys/types.h> | 
|  | #include <sys/mman.h> | 
|  |  | 
|  | #include <ctype.h> | 
|  | #include <inttypes.h> | 
|  | #include <regex.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <sysexits.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #if linux | 
|  | #include <endian.h> | 
|  | #else | 
|  | #include <machine/endian.h> | 
|  | #endif | 
|  |  | 
|  | #include "aicasm.h" | 
|  | #include "aicasm_symbol.h" | 
|  | #include "aicasm_insformat.h" | 
|  |  | 
|  | typedef struct patch { | 
|  | STAILQ_ENTRY(patch) links; | 
|  | int		patch_func; | 
|  | u_int		begin; | 
|  | u_int		skip_instr; | 
|  | u_int		skip_patch; | 
|  | } patch_t; | 
|  |  | 
|  | STAILQ_HEAD(patch_list, patch) patches; | 
|  |  | 
|  | static void usage(void); | 
|  | static void back_patch(void); | 
|  | static void output_code(void); | 
|  | static void output_listing(char *ifilename); | 
|  | static void dump_scope(scope_t *scope); | 
|  | static void emit_patch(scope_t *scope, int patch); | 
|  | static int check_patch(patch_t **start_patch, int start_instr, | 
|  | int *skip_addr, int *func_vals); | 
|  |  | 
|  | struct path_list search_path; | 
|  | int includes_search_curdir; | 
|  | char *appname; | 
|  | char *stock_include_file; | 
|  | FILE *ofile; | 
|  | char *ofilename; | 
|  | char *regfilename; | 
|  | FILE *regfile; | 
|  | char *listfilename; | 
|  | FILE *listfile; | 
|  | char *regdiagfilename; | 
|  | FILE *regdiagfile; | 
|  | int   src_mode; | 
|  | int   dst_mode; | 
|  |  | 
|  | static STAILQ_HEAD(,instruction) seq_program; | 
|  | struct cs_tailq cs_tailq; | 
|  | struct scope_list scope_stack; | 
|  | symlist_t patch_functions; | 
|  |  | 
|  | #if DEBUG | 
|  | extern int yy_flex_debug; | 
|  | extern int mm_flex_debug; | 
|  | extern int yydebug; | 
|  | extern int mmdebug; | 
|  | #endif | 
|  | extern FILE *yyin; | 
|  | extern int yyparse(void); | 
|  |  | 
|  | int main(int argc, char *argv[]); | 
|  |  | 
|  | int | 
|  | main(int argc, char *argv[]) | 
|  | { | 
|  | extern char *optarg; | 
|  | extern int optind; | 
|  | int  ch; | 
|  | int  retval; | 
|  | char *inputfilename; | 
|  | scope_t *sentinal; | 
|  |  | 
|  | STAILQ_INIT(&patches); | 
|  | SLIST_INIT(&search_path); | 
|  | STAILQ_INIT(&seq_program); | 
|  | TAILQ_INIT(&cs_tailq); | 
|  | SLIST_INIT(&scope_stack); | 
|  |  | 
|  | /* Set Sentinal scope node */ | 
|  | sentinal = scope_alloc(); | 
|  | sentinal->type = SCOPE_ROOT; | 
|  |  | 
|  | includes_search_curdir = 1; | 
|  | appname = *argv; | 
|  | regfile = NULL; | 
|  | listfile = NULL; | 
|  | #if DEBUG | 
|  | yy_flex_debug = 0; | 
|  | mm_flex_debug = 0; | 
|  | yydebug = 0; | 
|  | mmdebug = 0; | 
|  | #endif | 
|  | while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) { | 
|  | switch(ch) { | 
|  | case 'd': | 
|  | #if DEBUG | 
|  | if (strcmp(optarg, "s") == 0) { | 
|  | yy_flex_debug = 1; | 
|  | mm_flex_debug = 1; | 
|  | } else if (strcmp(optarg, "p") == 0) { | 
|  | yydebug = 1; | 
|  | mmdebug = 1; | 
|  | } else { | 
|  | fprintf(stderr, "%s: -d Requires either an " | 
|  | "'s' or 'p' argument\n", appname); | 
|  | usage(); | 
|  | } | 
|  | #else | 
|  | stop("-d: Assembler not built with debugging " | 
|  | "information", EX_SOFTWARE); | 
|  | #endif | 
|  | break; | 
|  | case 'i': | 
|  | stock_include_file = optarg; | 
|  | break; | 
|  | case 'l': | 
|  | /* Create a program listing */ | 
|  | if ((listfile = fopen(optarg, "w")) == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_CANTCREAT); | 
|  | } | 
|  | listfilename = optarg; | 
|  | break; | 
|  | case 'n': | 
|  | /* Don't complain about the -nostdinc directrive */ | 
|  | if (strcmp(optarg, "ostdinc")) { | 
|  | fprintf(stderr, "%s: Unknown option -%c%s\n", | 
|  | appname, ch, optarg); | 
|  | usage(); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | break; | 
|  | case 'o': | 
|  | if ((ofile = fopen(optarg, "w")) == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_CANTCREAT); | 
|  | } | 
|  | ofilename = optarg; | 
|  | break; | 
|  | case 'p': | 
|  | /* Create Register Diagnostic "printing" Functions */ | 
|  | if ((regdiagfile = fopen(optarg, "w")) == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_CANTCREAT); | 
|  | } | 
|  | regdiagfilename = optarg; | 
|  | break; | 
|  | case 'r': | 
|  | if ((regfile = fopen(optarg, "w")) == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_CANTCREAT); | 
|  | } | 
|  | regfilename = optarg; | 
|  | break; | 
|  | case 'I': | 
|  | { | 
|  | path_entry_t include_dir; | 
|  |  | 
|  | if (strcmp(optarg, "-") == 0) { | 
|  | if (includes_search_curdir == 0) { | 
|  | fprintf(stderr, "%s: Warning - '-I-' " | 
|  | "specified multiple " | 
|  | "times\n", appname); | 
|  | } | 
|  | includes_search_curdir = 0; | 
|  | for (include_dir = SLIST_FIRST(&search_path); | 
|  | include_dir != NULL; | 
|  | include_dir = SLIST_NEXT(include_dir, | 
|  | links)) | 
|  | /* | 
|  | * All entries before a '-I-' only | 
|  | * apply to includes specified with | 
|  | * quotes instead of "<>". | 
|  | */ | 
|  | include_dir->quoted_includes_only = 1; | 
|  | } else { | 
|  | include_dir = | 
|  | (path_entry_t)malloc(sizeof(*include_dir)); | 
|  | if (include_dir == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_OSERR); | 
|  | } | 
|  | include_dir->directory = strdup(optarg); | 
|  | if (include_dir->directory == NULL) { | 
|  | perror(optarg); | 
|  | stop(NULL, EX_OSERR); | 
|  | } | 
|  | include_dir->quoted_includes_only = 0; | 
|  | SLIST_INSERT_HEAD(&search_path, include_dir, | 
|  | links); | 
|  | } | 
|  | break; | 
|  | } | 
|  | case '?': | 
|  | default: | 
|  | usage(); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | } | 
|  | argc -= optind; | 
|  | argv += optind; | 
|  |  | 
|  | if (argc != 1) { | 
|  | fprintf(stderr, "%s: No input file specifiled\n", appname); | 
|  | usage(); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  |  | 
|  | if (regdiagfile != NULL | 
|  | && (regfile == NULL || stock_include_file == NULL)) { | 
|  | fprintf(stderr, | 
|  | "%s: The -p option requires the -r and -i options.\n", | 
|  | appname); | 
|  | usage(); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | symtable_open(); | 
|  | inputfilename = *argv; | 
|  | include_file(*argv, SOURCE_FILE); | 
|  | retval = yyparse(); | 
|  | if (retval == 0) { | 
|  | if (SLIST_FIRST(&scope_stack) == NULL | 
|  | || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) { | 
|  | stop("Unterminated conditional expression", EX_DATAERR); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  |  | 
|  | /* Process outmost scope */ | 
|  | process_scope(SLIST_FIRST(&scope_stack)); | 
|  | /* | 
|  | * Decend the tree of scopes and insert/emit | 
|  | * patches as appropriate.  We perform a depth first | 
|  | * tranversal, recursively handling each scope. | 
|  | */ | 
|  | /* start at the root scope */ | 
|  | dump_scope(SLIST_FIRST(&scope_stack)); | 
|  |  | 
|  | /* Patch up forward jump addresses */ | 
|  | back_patch(); | 
|  |  | 
|  | if (ofile != NULL) | 
|  | output_code(); | 
|  | if (regfile != NULL) | 
|  | symtable_dump(regfile, regdiagfile); | 
|  | if (listfile != NULL) | 
|  | output_listing(inputfilename); | 
|  | } | 
|  |  | 
|  | stop(NULL, 0); | 
|  | /* NOTREACHED */ | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static void | 
|  | usage() | 
|  | { | 
|  |  | 
|  | (void)fprintf(stderr, | 
|  | "usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n" | 
|  | "	[-r register_output_file [-p register_diag_file -i includefile]]\n" | 
|  | "	[-l program_list_file]\n" | 
|  | "	input_file\n", appname); | 
|  | exit(EX_USAGE); | 
|  | } | 
|  |  | 
|  | static void | 
|  | back_patch() | 
|  | { | 
|  | struct instruction *cur_instr; | 
|  |  | 
|  | for (cur_instr = STAILQ_FIRST(&seq_program); | 
|  | cur_instr != NULL; | 
|  | cur_instr = STAILQ_NEXT(cur_instr, links)) { | 
|  | if (cur_instr->patch_label != NULL) { | 
|  | struct ins_format3 *f3_instr; | 
|  | u_int address; | 
|  |  | 
|  | if (cur_instr->patch_label->type != LABEL) { | 
|  | char buf[255]; | 
|  |  | 
|  | snprintf(buf, sizeof(buf), | 
|  | "Undefined label %s", | 
|  | cur_instr->patch_label->name); | 
|  | stop(buf, EX_DATAERR); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | f3_instr = &cur_instr->format.format3; | 
|  | address = f3_instr->address; | 
|  | address += cur_instr->patch_label->info.linfo->address; | 
|  | f3_instr->address = address; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | output_code() | 
|  | { | 
|  | struct instruction *cur_instr; | 
|  | patch_t *cur_patch; | 
|  | critical_section_t *cs; | 
|  | symbol_node_t *cur_node; | 
|  | int instrcount; | 
|  |  | 
|  | instrcount = 0; | 
|  | fprintf(ofile, | 
|  | "/*\n" | 
|  | " * DO NOT EDIT - This file is automatically generated\n" | 
|  | " *		 from the following source files:\n" | 
|  | " *\n" | 
|  | "%s */\n", versions); | 
|  |  | 
|  | fprintf(ofile, "static const uint8_t seqprog[] = {\n"); | 
|  | for (cur_instr = STAILQ_FIRST(&seq_program); | 
|  | cur_instr != NULL; | 
|  | cur_instr = STAILQ_NEXT(cur_instr, links)) { | 
|  |  | 
|  | fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x", | 
|  | cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n", | 
|  | #ifdef __LITTLE_ENDIAN | 
|  | cur_instr->format.bytes[0], | 
|  | cur_instr->format.bytes[1], | 
|  | cur_instr->format.bytes[2], | 
|  | cur_instr->format.bytes[3]); | 
|  | #else | 
|  | cur_instr->format.bytes[3], | 
|  | cur_instr->format.bytes[2], | 
|  | cur_instr->format.bytes[1], | 
|  | cur_instr->format.bytes[0]); | 
|  | #endif | 
|  | instrcount++; | 
|  | } | 
|  | fprintf(ofile, "\n};\n\n"); | 
|  |  | 
|  | if (patch_arg_list == NULL) | 
|  | stop("Patch argument list not defined", | 
|  | EX_DATAERR); | 
|  |  | 
|  | /* | 
|  | *  Output patch information.  Patch functions first. | 
|  | */ | 
|  | fprintf(ofile, | 
|  | "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list); | 
|  |  | 
|  | for (cur_node = SLIST_FIRST(&patch_functions); | 
|  | cur_node != NULL; | 
|  | cur_node = SLIST_NEXT(cur_node,links)) { | 
|  | fprintf(ofile, | 
|  | "static %spatch_func_t %spatch%d_func;\n" | 
|  | "\n" | 
|  | "static int\n" | 
|  | "%spatch%d_func(%s)\n" | 
|  | "{\n" | 
|  | "	return (%s);\n" | 
|  | "}\n\n", | 
|  | prefix, | 
|  | prefix, | 
|  | cur_node->symbol->info.condinfo->func_num, | 
|  | prefix, | 
|  | cur_node->symbol->info.condinfo->func_num, | 
|  | patch_arg_list, | 
|  | cur_node->symbol->name); | 
|  | } | 
|  |  | 
|  | fprintf(ofile, | 
|  | "static const struct patch {\n" | 
|  | "	%spatch_func_t		*patch_func;\n" | 
|  | "	uint32_t		 begin		:10,\n" | 
|  | "				 skip_instr	:10,\n" | 
|  | "				 skip_patch	:12;\n" | 
|  | "} patches[] = {\n", prefix); | 
|  |  | 
|  | for (cur_patch = STAILQ_FIRST(&patches); | 
|  | cur_patch != NULL; | 
|  | cur_patch = STAILQ_NEXT(cur_patch,links)) { | 
|  | fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }", | 
|  | cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n", | 
|  | prefix, | 
|  | cur_patch->patch_func, cur_patch->begin, | 
|  | cur_patch->skip_instr, cur_patch->skip_patch); | 
|  | } | 
|  |  | 
|  | fprintf(ofile, "\n};\n\n"); | 
|  |  | 
|  | fprintf(ofile, | 
|  | "static const struct cs {\n" | 
|  | "	uint16_t	begin;\n" | 
|  | "	uint16_t	end;\n" | 
|  | "} critical_sections[] = {\n"); | 
|  |  | 
|  | for (cs = TAILQ_FIRST(&cs_tailq); | 
|  | cs != NULL; | 
|  | cs = TAILQ_NEXT(cs, links)) { | 
|  | fprintf(ofile, "%s\t{ %d, %d }", | 
|  | cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n", | 
|  | cs->begin_addr, cs->end_addr); | 
|  | } | 
|  |  | 
|  | fprintf(ofile, "\n};\n\n"); | 
|  |  | 
|  | fprintf(ofile, | 
|  | "static const int num_critical_sections = sizeof(critical_sections)\n" | 
|  | "				       / sizeof(*critical_sections);\n"); | 
|  |  | 
|  | fprintf(stderr, "%s: %d instructions used\n", appname, instrcount); | 
|  | } | 
|  |  | 
|  | static void | 
|  | dump_scope(scope_t *scope) | 
|  | { | 
|  | scope_t *cur_scope; | 
|  |  | 
|  | /* | 
|  | * Emit the first patch for this scope | 
|  | */ | 
|  | emit_patch(scope, 0); | 
|  |  | 
|  | /* | 
|  | * Dump each scope within this one. | 
|  | */ | 
|  | cur_scope = TAILQ_FIRST(&scope->inner_scope); | 
|  |  | 
|  | while (cur_scope != NULL) { | 
|  |  | 
|  | dump_scope(cur_scope); | 
|  |  | 
|  | cur_scope = TAILQ_NEXT(cur_scope, scope_links); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Emit the second, closing, patch for this scope | 
|  | */ | 
|  | emit_patch(scope, 1); | 
|  | } | 
|  |  | 
|  | void | 
|  | emit_patch(scope_t *scope, int patch) | 
|  | { | 
|  | patch_info_t *pinfo; | 
|  | patch_t *new_patch; | 
|  |  | 
|  | pinfo = &scope->patches[patch]; | 
|  |  | 
|  | if (pinfo->skip_instr == 0) | 
|  | /* No-Op patch */ | 
|  | return; | 
|  |  | 
|  | new_patch = (patch_t *)malloc(sizeof(*new_patch)); | 
|  |  | 
|  | if (new_patch == NULL) | 
|  | stop("Could not malloc patch structure", EX_OSERR); | 
|  |  | 
|  | memset(new_patch, 0, sizeof(*new_patch)); | 
|  |  | 
|  | if (patch == 0) { | 
|  | new_patch->patch_func = scope->func_num; | 
|  | new_patch->begin = scope->begin_addr; | 
|  | } else { | 
|  | new_patch->patch_func = 0; | 
|  | new_patch->begin = scope->end_addr; | 
|  | } | 
|  | new_patch->skip_instr = pinfo->skip_instr; | 
|  | new_patch->skip_patch = pinfo->skip_patch; | 
|  | STAILQ_INSERT_TAIL(&patches, new_patch, links); | 
|  | } | 
|  |  | 
|  | void | 
|  | output_listing(char *ifilename) | 
|  | { | 
|  | char buf[1024]; | 
|  | FILE *ifile; | 
|  | struct instruction *cur_instr; | 
|  | patch_t *cur_patch; | 
|  | symbol_node_t *cur_func; | 
|  | int *func_values; | 
|  | int instrcount; | 
|  | int instrptr; | 
|  | int line; | 
|  | int func_count; | 
|  | int skip_addr; | 
|  |  | 
|  | instrcount = 0; | 
|  | instrptr = 0; | 
|  | line = 1; | 
|  | skip_addr = 0; | 
|  | if ((ifile = fopen(ifilename, "r")) == NULL) { | 
|  | perror(ifilename); | 
|  | stop(NULL, EX_DATAERR); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determine which options to apply to this listing. | 
|  | */ | 
|  | for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions); | 
|  | cur_func != NULL; | 
|  | cur_func = SLIST_NEXT(cur_func, links)) | 
|  | func_count++; | 
|  |  | 
|  | func_values = NULL; | 
|  | if (func_count != 0) { | 
|  | func_values = (int *)malloc(func_count * sizeof(int)); | 
|  |  | 
|  | if (func_values == NULL) | 
|  | stop("Could not malloc", EX_OSERR); | 
|  |  | 
|  | func_values[0] = 0; /* FALSE func */ | 
|  | func_count--; | 
|  |  | 
|  | /* | 
|  | * Ask the user to fill in the return values for | 
|  | * the rest of the functions. | 
|  | */ | 
|  |  | 
|  |  | 
|  | for (cur_func = SLIST_FIRST(&patch_functions); | 
|  | cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL; | 
|  | cur_func = SLIST_NEXT(cur_func, links), func_count--) { | 
|  | int input; | 
|  |  | 
|  | fprintf(stdout, "\n(%s)\n", cur_func->symbol->name); | 
|  | fprintf(stdout, | 
|  | "Enter the return value for " | 
|  | "this expression[T/F]:"); | 
|  |  | 
|  | while (1) { | 
|  |  | 
|  | input = getchar(); | 
|  | input = toupper(input); | 
|  |  | 
|  | if (input == 'T') { | 
|  | func_values[func_count] = 1; | 
|  | break; | 
|  | } else if (input == 'F') { | 
|  | func_values[func_count] = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (isatty(fileno(stdin)) == 0) | 
|  | putchar(input); | 
|  | } | 
|  | fprintf(stdout, "\nThanks!\n"); | 
|  | } | 
|  |  | 
|  | /* Now output the listing */ | 
|  | cur_patch = STAILQ_FIRST(&patches); | 
|  | for (cur_instr = STAILQ_FIRST(&seq_program); | 
|  | cur_instr != NULL; | 
|  | cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) { | 
|  |  | 
|  | if (check_patch(&cur_patch, instrcount, | 
|  | &skip_addr, func_values) == 0) { | 
|  | /* Don't count this instruction as it is in a patch | 
|  | * that was removed. | 
|  | */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | while (line < cur_instr->srcline) { | 
|  | fgets(buf, sizeof(buf), ifile); | 
|  | fprintf(listfile, "             \t%s", buf); | 
|  | line++; | 
|  | } | 
|  | fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr, | 
|  | #ifdef __LITTLE_ENDIAN | 
|  | cur_instr->format.bytes[0], | 
|  | cur_instr->format.bytes[1], | 
|  | cur_instr->format.bytes[2], | 
|  | cur_instr->format.bytes[3]); | 
|  | #else | 
|  | cur_instr->format.bytes[3], | 
|  | cur_instr->format.bytes[2], | 
|  | cur_instr->format.bytes[1], | 
|  | cur_instr->format.bytes[0]); | 
|  | #endif | 
|  | /* | 
|  | * Macro expansions can cause several instructions | 
|  | * to be output for a single source line.  Only | 
|  | * advance the line once in these cases. | 
|  | */ | 
|  | if (line == cur_instr->srcline) { | 
|  | fgets(buf, sizeof(buf), ifile); | 
|  | fprintf(listfile, "\t%s", buf); | 
|  | line++; | 
|  | } else { | 
|  | fprintf(listfile, "\n"); | 
|  | } | 
|  | instrptr++; | 
|  | } | 
|  | /* Dump the remainder of the file */ | 
|  | while(fgets(buf, sizeof(buf), ifile) != NULL) | 
|  | fprintf(listfile, "             %s", buf); | 
|  |  | 
|  | fclose(ifile); | 
|  | } | 
|  |  | 
|  | static int | 
|  | check_patch(patch_t **start_patch, int start_instr, | 
|  | int *skip_addr, int *func_vals) | 
|  | { | 
|  | patch_t *cur_patch; | 
|  |  | 
|  | cur_patch = *start_patch; | 
|  |  | 
|  | while (cur_patch != NULL && start_instr == cur_patch->begin) { | 
|  | if (func_vals[cur_patch->patch_func] == 0) { | 
|  | int skip; | 
|  |  | 
|  | /* Start rejecting code */ | 
|  | *skip_addr = start_instr + cur_patch->skip_instr; | 
|  | for (skip = cur_patch->skip_patch; | 
|  | skip > 0 && cur_patch != NULL; | 
|  | skip--) | 
|  | cur_patch = STAILQ_NEXT(cur_patch, links); | 
|  | } else { | 
|  | /* Accepted this patch.  Advance to the next | 
|  | * one and wait for our intruction pointer to | 
|  | * hit this point. | 
|  | */ | 
|  | cur_patch = STAILQ_NEXT(cur_patch, links); | 
|  | } | 
|  | } | 
|  |  | 
|  | *start_patch = cur_patch; | 
|  | if (start_instr < *skip_addr) | 
|  | /* Still skipping */ | 
|  | return (0); | 
|  |  | 
|  | return (1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Print out error information if appropriate, and clean up before | 
|  | * terminating the program. | 
|  | */ | 
|  | void | 
|  | stop(const char *string, int err_code) | 
|  | { | 
|  | if (string != NULL) { | 
|  | fprintf(stderr, "%s: ", appname); | 
|  | if (yyfilename != NULL) { | 
|  | fprintf(stderr, "Stopped at file %s, line %d - ", | 
|  | yyfilename, yylineno); | 
|  | } | 
|  | fprintf(stderr, "%s\n", string); | 
|  | } | 
|  |  | 
|  | if (ofile != NULL) { | 
|  | fclose(ofile); | 
|  | if (err_code != 0) { | 
|  | fprintf(stderr, "%s: Removing %s due to error\n", | 
|  | appname, ofilename); | 
|  | unlink(ofilename); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (regfile != NULL) { | 
|  | fclose(regfile); | 
|  | if (err_code != 0) { | 
|  | fprintf(stderr, "%s: Removing %s due to error\n", | 
|  | appname, regfilename); | 
|  | unlink(regfilename); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (listfile != NULL) { | 
|  | fclose(listfile); | 
|  | if (err_code != 0) { | 
|  | fprintf(stderr, "%s: Removing %s due to error\n", | 
|  | appname, listfilename); | 
|  | unlink(listfilename); | 
|  | } | 
|  | } | 
|  |  | 
|  | symlist_free(&patch_functions); | 
|  | symtable_close(); | 
|  |  | 
|  | exit(err_code); | 
|  | } | 
|  |  | 
|  | struct instruction * | 
|  | seq_alloc() | 
|  | { | 
|  | struct instruction *new_instr; | 
|  |  | 
|  | new_instr = (struct instruction *)malloc(sizeof(struct instruction)); | 
|  | if (new_instr == NULL) | 
|  | stop("Unable to malloc instruction object", EX_SOFTWARE); | 
|  | memset(new_instr, 0, sizeof(*new_instr)); | 
|  | STAILQ_INSERT_TAIL(&seq_program, new_instr, links); | 
|  | new_instr->srcline = yylineno; | 
|  | return new_instr; | 
|  | } | 
|  |  | 
|  | critical_section_t * | 
|  | cs_alloc() | 
|  | { | 
|  | critical_section_t *new_cs; | 
|  |  | 
|  | new_cs= (critical_section_t *)malloc(sizeof(critical_section_t)); | 
|  | if (new_cs == NULL) | 
|  | stop("Unable to malloc critical_section object", EX_SOFTWARE); | 
|  | memset(new_cs, 0, sizeof(*new_cs)); | 
|  |  | 
|  | TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links); | 
|  | return new_cs; | 
|  | } | 
|  |  | 
|  | scope_t * | 
|  | scope_alloc() | 
|  | { | 
|  | scope_t *new_scope; | 
|  |  | 
|  | new_scope = (scope_t *)malloc(sizeof(scope_t)); | 
|  | if (new_scope == NULL) | 
|  | stop("Unable to malloc scope object", EX_SOFTWARE); | 
|  | memset(new_scope, 0, sizeof(*new_scope)); | 
|  | TAILQ_INIT(&new_scope->inner_scope); | 
|  |  | 
|  | if (SLIST_FIRST(&scope_stack) != NULL) { | 
|  | TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope, | 
|  | new_scope, scope_links); | 
|  | } | 
|  | /* This patch is now the current scope */ | 
|  | SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links); | 
|  | return new_scope; | 
|  | } | 
|  |  | 
|  | void | 
|  | process_scope(scope_t *scope) | 
|  | { | 
|  | /* | 
|  | * We are "leaving" this scope.  We should now have | 
|  | * enough information to process the lists of scopes | 
|  | * we encapsulate. | 
|  | */ | 
|  | scope_t *cur_scope; | 
|  | u_int skip_patch_count; | 
|  | u_int skip_instr_count; | 
|  |  | 
|  | cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq); | 
|  | skip_patch_count = 0; | 
|  | skip_instr_count = 0; | 
|  | while (cur_scope != NULL) { | 
|  | u_int patch0_patch_skip; | 
|  |  | 
|  | patch0_patch_skip = 0; | 
|  | switch (cur_scope->type) { | 
|  | case SCOPE_IF: | 
|  | case SCOPE_ELSE_IF: | 
|  | if (skip_instr_count != 0) { | 
|  | /* Create a tail patch */ | 
|  | patch0_patch_skip++; | 
|  | cur_scope->patches[1].skip_patch = | 
|  | skip_patch_count + 1; | 
|  | cur_scope->patches[1].skip_instr = | 
|  | skip_instr_count; | 
|  | } | 
|  |  | 
|  | /* Count Head patch */ | 
|  | patch0_patch_skip++; | 
|  |  | 
|  | /* Count any patches contained in our inner scope */ | 
|  | patch0_patch_skip += cur_scope->inner_scope_patches; | 
|  |  | 
|  | cur_scope->patches[0].skip_patch = patch0_patch_skip; | 
|  | cur_scope->patches[0].skip_instr = | 
|  | cur_scope->end_addr - cur_scope->begin_addr; | 
|  |  | 
|  | skip_instr_count += cur_scope->patches[0].skip_instr; | 
|  |  | 
|  | skip_patch_count += patch0_patch_skip; | 
|  | if (cur_scope->type == SCOPE_IF) { | 
|  | scope->inner_scope_patches += skip_patch_count; | 
|  | skip_patch_count = 0; | 
|  | skip_instr_count = 0; | 
|  | } | 
|  | break; | 
|  | case SCOPE_ELSE: | 
|  | /* Count any patches contained in our innter scope */ | 
|  | skip_patch_count += cur_scope->inner_scope_patches; | 
|  |  | 
|  | skip_instr_count += cur_scope->end_addr | 
|  | - cur_scope->begin_addr; | 
|  | break; | 
|  | case SCOPE_ROOT: | 
|  | stop("Unexpected scope type encountered", EX_SOFTWARE); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  |  | 
|  | cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links); | 
|  | } | 
|  | } |