| /* | 
 |     i2c-dev.c - i2c-bus driver, char device interface | 
 |  | 
 |     Copyright (C) 1995-97 Simon G. Vogl | 
 |     Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl> | 
 |     Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> | 
 |  | 
 |     This program is free software; you can redistribute it and/or modify | 
 |     it under the terms of the GNU General Public License as published by | 
 |     the Free Software Foundation; either version 2 of the License, or | 
 |     (at your option) any later version. | 
 |  | 
 |     This program is distributed in the hope that it will be useful, | 
 |     but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |     GNU General Public License for more details. | 
 |  | 
 |     You should have received a copy of the GNU General Public License | 
 |     along with this program; if not, write to the Free Software | 
 |     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | */ | 
 |  | 
 | /* Note that this is a complete rewrite of Simon Vogl's i2c-dev module. | 
 |    But I have used so much of his original code and ideas that it seems | 
 |    only fair to recognize him as co-author -- Frodo */ | 
 |  | 
 | /* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/device.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/init.h> | 
 | #include <linux/list.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/i2c-dev.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/uaccess.h> | 
 |  | 
 | /* | 
 |  * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a | 
 |  * slave (i2c_client) with which messages will be exchanged.  It's coupled | 
 |  * with a character special file which is accessed by user mode drivers. | 
 |  * | 
 |  * The list of i2c_dev structures is parallel to the i2c_adapter lists | 
 |  * maintained by the driver model, and is updated using bus notifications. | 
 |  */ | 
 | struct i2c_dev { | 
 | 	struct list_head list; | 
 | 	struct i2c_adapter *adap; | 
 | 	struct device *dev; | 
 | }; | 
 |  | 
 | #define I2C_MINORS	256 | 
 | static LIST_HEAD(i2c_dev_list); | 
 | static DEFINE_SPINLOCK(i2c_dev_list_lock); | 
 |  | 
 | static struct i2c_dev *i2c_dev_get_by_minor(unsigned index) | 
 | { | 
 | 	struct i2c_dev *i2c_dev; | 
 |  | 
 | 	spin_lock(&i2c_dev_list_lock); | 
 | 	list_for_each_entry(i2c_dev, &i2c_dev_list, list) { | 
 | 		if (i2c_dev->adap->nr == index) | 
 | 			goto found; | 
 | 	} | 
 | 	i2c_dev = NULL; | 
 | found: | 
 | 	spin_unlock(&i2c_dev_list_lock); | 
 | 	return i2c_dev; | 
 | } | 
 |  | 
 | static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap) | 
 | { | 
 | 	struct i2c_dev *i2c_dev; | 
 |  | 
 | 	if (adap->nr >= I2C_MINORS) { | 
 | 		printk(KERN_ERR "i2c-dev: Out of device minors (%d)\n", | 
 | 		       adap->nr); | 
 | 		return ERR_PTR(-ENODEV); | 
 | 	} | 
 |  | 
 | 	i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL); | 
 | 	if (!i2c_dev) | 
 | 		return ERR_PTR(-ENOMEM); | 
 | 	i2c_dev->adap = adap; | 
 |  | 
 | 	spin_lock(&i2c_dev_list_lock); | 
 | 	list_add_tail(&i2c_dev->list, &i2c_dev_list); | 
 | 	spin_unlock(&i2c_dev_list_lock); | 
 | 	return i2c_dev; | 
 | } | 
 |  | 
 | static void return_i2c_dev(struct i2c_dev *i2c_dev) | 
 | { | 
 | 	spin_lock(&i2c_dev_list_lock); | 
 | 	list_del(&i2c_dev->list); | 
 | 	spin_unlock(&i2c_dev_list_lock); | 
 | 	kfree(i2c_dev); | 
 | } | 
 |  | 
 | static ssize_t show_adapter_name(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt)); | 
 |  | 
 | 	if (!i2c_dev) | 
 | 		return -ENODEV; | 
 | 	return sprintf(buf, "%s\n", i2c_dev->adap->name); | 
 | } | 
 | static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); | 
 |  | 
 | /* ------------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * After opening an instance of this character special file, a file | 
 |  * descriptor starts out associated only with an i2c_adapter (and bus). | 
 |  * | 
 |  * Using the I2C_RDWR ioctl(), you can then *immediately* issue i2c_msg | 
 |  * traffic to any devices on the bus used by that adapter.  That's because | 
 |  * the i2c_msg vectors embed all the addressing information they need, and | 
 |  * are submitted directly to an i2c_adapter.  However, SMBus-only adapters | 
 |  * don't support that interface. | 
 |  * | 
 |  * To use read()/write() system calls on that file descriptor, or to use | 
 |  * SMBus interfaces (and work with SMBus-only hosts!), you must first issue | 
 |  * an I2C_SLAVE (or I2C_SLAVE_FORCE) ioctl.  That configures an anonymous | 
 |  * (never registered) i2c_client so it holds the addressing information | 
 |  * needed by those system calls and by this SMBus interface. | 
 |  */ | 
 |  | 
 | static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count, | 
 | 		loff_t *offset) | 
 | { | 
 | 	char *tmp; | 
 | 	int ret; | 
 |  | 
 | 	struct i2c_client *client = file->private_data; | 
 |  | 
 | 	if (count > 8192) | 
 | 		count = 8192; | 
 |  | 
 | 	tmp = kmalloc(count, GFP_KERNEL); | 
 | 	if (tmp == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n", | 
 | 		iminor(file->f_path.dentry->d_inode), count); | 
 |  | 
 | 	ret = i2c_master_recv(client, tmp, count); | 
 | 	if (ret >= 0) | 
 | 		ret = copy_to_user(buf, tmp, count) ? -EFAULT : ret; | 
 | 	kfree(tmp); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t i2cdev_write(struct file *file, const char __user *buf, | 
 | 		size_t count, loff_t *offset) | 
 | { | 
 | 	int ret; | 
 | 	char *tmp; | 
 | 	struct i2c_client *client = file->private_data; | 
 |  | 
 | 	if (count > 8192) | 
 | 		count = 8192; | 
 |  | 
 | 	tmp = memdup_user(buf, count); | 
 | 	if (IS_ERR(tmp)) | 
 | 		return PTR_ERR(tmp); | 
 |  | 
 | 	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n", | 
 | 		iminor(file->f_path.dentry->d_inode), count); | 
 |  | 
 | 	ret = i2c_master_send(client, tmp, count); | 
 | 	kfree(tmp); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int i2cdev_check(struct device *dev, void *addrp) | 
 | { | 
 | 	struct i2c_client *client = i2c_verify_client(dev); | 
 |  | 
 | 	if (!client || client->addr != *(unsigned int *)addrp) | 
 | 		return 0; | 
 |  | 
 | 	return dev->driver ? -EBUSY : 0; | 
 | } | 
 |  | 
 | /* walk up mux tree */ | 
 | static int i2cdev_check_mux_parents(struct i2c_adapter *adapter, int addr) | 
 | { | 
 | 	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); | 
 | 	int result; | 
 |  | 
 | 	result = device_for_each_child(&adapter->dev, &addr, i2cdev_check); | 
 | 	if (!result && parent) | 
 | 		result = i2cdev_check_mux_parents(parent, addr); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* recurse down mux tree */ | 
 | static int i2cdev_check_mux_children(struct device *dev, void *addrp) | 
 | { | 
 | 	int result; | 
 |  | 
 | 	if (dev->type == &i2c_adapter_type) | 
 | 		result = device_for_each_child(dev, addrp, | 
 | 						i2cdev_check_mux_children); | 
 | 	else | 
 | 		result = i2cdev_check(dev, addrp); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* This address checking function differs from the one in i2c-core | 
 |    in that it considers an address with a registered device, but no | 
 |    driver bound to it, as NOT busy. */ | 
 | static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr) | 
 | { | 
 | 	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter); | 
 | 	int result = 0; | 
 |  | 
 | 	if (parent) | 
 | 		result = i2cdev_check_mux_parents(parent, addr); | 
 |  | 
 | 	if (!result) | 
 | 		result = device_for_each_child(&adapter->dev, &addr, | 
 | 						i2cdev_check_mux_children); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client, | 
 | 		unsigned long arg) | 
 | { | 
 | 	struct i2c_rdwr_ioctl_data rdwr_arg; | 
 | 	struct i2c_msg *rdwr_pa; | 
 | 	u8 __user **data_ptrs; | 
 | 	int i, res; | 
 |  | 
 | 	if (copy_from_user(&rdwr_arg, | 
 | 			   (struct i2c_rdwr_ioctl_data __user *)arg, | 
 | 			   sizeof(rdwr_arg))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Put an arbitrary limit on the number of messages that can | 
 | 	 * be sent at once */ | 
 | 	if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rdwr_pa = memdup_user(rdwr_arg.msgs, | 
 | 			      rdwr_arg.nmsgs * sizeof(struct i2c_msg)); | 
 | 	if (IS_ERR(rdwr_pa)) | 
 | 		return PTR_ERR(rdwr_pa); | 
 |  | 
 | 	data_ptrs = kmalloc(rdwr_arg.nmsgs * sizeof(u8 __user *), GFP_KERNEL); | 
 | 	if (data_ptrs == NULL) { | 
 | 		kfree(rdwr_pa); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	res = 0; | 
 | 	for (i = 0; i < rdwr_arg.nmsgs; i++) { | 
 | 		/* Limit the size of the message to a sane amount; | 
 | 		 * and don't let length change either. */ | 
 | 		if ((rdwr_pa[i].len > 8192) || | 
 | 		    (rdwr_pa[i].flags & I2C_M_RECV_LEN)) { | 
 | 			res = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf; | 
 | 		rdwr_pa[i].buf = memdup_user(data_ptrs[i], rdwr_pa[i].len); | 
 | 		if (IS_ERR(rdwr_pa[i].buf)) { | 
 | 			res = PTR_ERR(rdwr_pa[i].buf); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (res < 0) { | 
 | 		int j; | 
 | 		for (j = 0; j < i; ++j) | 
 | 			kfree(rdwr_pa[j].buf); | 
 | 		kfree(data_ptrs); | 
 | 		kfree(rdwr_pa); | 
 | 		return res; | 
 | 	} | 
 |  | 
 | 	res = i2c_transfer(client->adapter, rdwr_pa, rdwr_arg.nmsgs); | 
 | 	while (i-- > 0) { | 
 | 		if (res >= 0 && (rdwr_pa[i].flags & I2C_M_RD)) { | 
 | 			if (copy_to_user(data_ptrs[i], rdwr_pa[i].buf, | 
 | 					 rdwr_pa[i].len)) | 
 | 				res = -EFAULT; | 
 | 		} | 
 | 		kfree(rdwr_pa[i].buf); | 
 | 	} | 
 | 	kfree(data_ptrs); | 
 | 	kfree(rdwr_pa); | 
 | 	return res; | 
 | } | 
 |  | 
 | static noinline int i2cdev_ioctl_smbus(struct i2c_client *client, | 
 | 		unsigned long arg) | 
 | { | 
 | 	struct i2c_smbus_ioctl_data data_arg; | 
 | 	union i2c_smbus_data temp; | 
 | 	int datasize, res; | 
 |  | 
 | 	if (copy_from_user(&data_arg, | 
 | 			   (struct i2c_smbus_ioctl_data __user *) arg, | 
 | 			   sizeof(struct i2c_smbus_ioctl_data))) | 
 | 		return -EFAULT; | 
 | 	if ((data_arg.size != I2C_SMBUS_BYTE) && | 
 | 	    (data_arg.size != I2C_SMBUS_QUICK) && | 
 | 	    (data_arg.size != I2C_SMBUS_BYTE_DATA) && | 
 | 	    (data_arg.size != I2C_SMBUS_WORD_DATA) && | 
 | 	    (data_arg.size != I2C_SMBUS_PROC_CALL) && | 
 | 	    (data_arg.size != I2C_SMBUS_BLOCK_DATA) && | 
 | 	    (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) && | 
 | 	    (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) && | 
 | 	    (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) { | 
 | 		dev_dbg(&client->adapter->dev, | 
 | 			"size out of range (%x) in ioctl I2C_SMBUS.\n", | 
 | 			data_arg.size); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, | 
 | 	   so the check is valid if size==I2C_SMBUS_QUICK too. */ | 
 | 	if ((data_arg.read_write != I2C_SMBUS_READ) && | 
 | 	    (data_arg.read_write != I2C_SMBUS_WRITE)) { | 
 | 		dev_dbg(&client->adapter->dev, | 
 | 			"read_write out of range (%x) in ioctl I2C_SMBUS.\n", | 
 | 			data_arg.read_write); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Note that command values are always valid! */ | 
 |  | 
 | 	if ((data_arg.size == I2C_SMBUS_QUICK) || | 
 | 	    ((data_arg.size == I2C_SMBUS_BYTE) && | 
 | 	    (data_arg.read_write == I2C_SMBUS_WRITE))) | 
 | 		/* These are special: we do not use data */ | 
 | 		return i2c_smbus_xfer(client->adapter, client->addr, | 
 | 				      client->flags, data_arg.read_write, | 
 | 				      data_arg.command, data_arg.size, NULL); | 
 |  | 
 | 	if (data_arg.data == NULL) { | 
 | 		dev_dbg(&client->adapter->dev, | 
 | 			"data is NULL pointer in ioctl I2C_SMBUS.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if ((data_arg.size == I2C_SMBUS_BYTE_DATA) || | 
 | 	    (data_arg.size == I2C_SMBUS_BYTE)) | 
 | 		datasize = sizeof(data_arg.data->byte); | 
 | 	else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || | 
 | 		 (data_arg.size == I2C_SMBUS_PROC_CALL)) | 
 | 		datasize = sizeof(data_arg.data->word); | 
 | 	else /* size == smbus block, i2c block, or block proc. call */ | 
 | 		datasize = sizeof(data_arg.data->block); | 
 |  | 
 | 	if ((data_arg.size == I2C_SMBUS_PROC_CALL) || | 
 | 	    (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || | 
 | 	    (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) || | 
 | 	    (data_arg.read_write == I2C_SMBUS_WRITE)) { | 
 | 		if (copy_from_user(&temp, data_arg.data, datasize)) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) { | 
 | 		/* Convert old I2C block commands to the new | 
 | 		   convention. This preserves binary compatibility. */ | 
 | 		data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA; | 
 | 		if (data_arg.read_write == I2C_SMBUS_READ) | 
 | 			temp.block[0] = I2C_SMBUS_BLOCK_MAX; | 
 | 	} | 
 | 	res = i2c_smbus_xfer(client->adapter, client->addr, client->flags, | 
 | 	      data_arg.read_write, data_arg.command, data_arg.size, &temp); | 
 | 	if (!res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || | 
 | 		     (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || | 
 | 		     (data_arg.read_write == I2C_SMBUS_READ))) { | 
 | 		if (copy_to_user(data_arg.data, &temp, datasize)) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	return res; | 
 | } | 
 |  | 
 | static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct i2c_client *client = file->private_data; | 
 | 	unsigned long funcs; | 
 |  | 
 | 	dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n", | 
 | 		cmd, arg); | 
 |  | 
 | 	switch (cmd) { | 
 | 	case I2C_SLAVE: | 
 | 	case I2C_SLAVE_FORCE: | 
 | 		/* NOTE:  devices set up to work with "new style" drivers | 
 | 		 * can't use I2C_SLAVE, even when the device node is not | 
 | 		 * bound to a driver.  Only I2C_SLAVE_FORCE will work. | 
 | 		 * | 
 | 		 * Setting the PEC flag here won't affect kernel drivers, | 
 | 		 * which will be using the i2c_client node registered with | 
 | 		 * the driver model core.  Likewise, when that client has | 
 | 		 * the PEC flag already set, the i2c-dev driver won't see | 
 | 		 * (or use) this setting. | 
 | 		 */ | 
 | 		if ((arg > 0x3ff) || | 
 | 		    (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f)) | 
 | 			return -EINVAL; | 
 | 		if (cmd == I2C_SLAVE && i2cdev_check_addr(client->adapter, arg)) | 
 | 			return -EBUSY; | 
 | 		/* REVISIT: address could become busy later */ | 
 | 		client->addr = arg; | 
 | 		return 0; | 
 | 	case I2C_TENBIT: | 
 | 		if (arg) | 
 | 			client->flags |= I2C_M_TEN; | 
 | 		else | 
 | 			client->flags &= ~I2C_M_TEN; | 
 | 		return 0; | 
 | 	case I2C_PEC: | 
 | 		if (arg) | 
 | 			client->flags |= I2C_CLIENT_PEC; | 
 | 		else | 
 | 			client->flags &= ~I2C_CLIENT_PEC; | 
 | 		return 0; | 
 | 	case I2C_FUNCS: | 
 | 		funcs = i2c_get_functionality(client->adapter); | 
 | 		return put_user(funcs, (unsigned long __user *)arg); | 
 |  | 
 | 	case I2C_RDWR: | 
 | 		return i2cdev_ioctl_rdrw(client, arg); | 
 |  | 
 | 	case I2C_SMBUS: | 
 | 		return i2cdev_ioctl_smbus(client, arg); | 
 |  | 
 | 	case I2C_RETRIES: | 
 | 		client->adapter->retries = arg; | 
 | 		break; | 
 | 	case I2C_TIMEOUT: | 
 | 		/* For historical reasons, user-space sets the timeout | 
 | 		 * value in units of 10 ms. | 
 | 		 */ | 
 | 		client->adapter->timeout = msecs_to_jiffies(arg * 10); | 
 | 		break; | 
 | 	default: | 
 | 		/* NOTE:  returning a fault code here could cause trouble | 
 | 		 * in buggy userspace code.  Some old kernel bugs returned | 
 | 		 * zero in this case, and userspace code might accidentally | 
 | 		 * have depended on that bug. | 
 | 		 */ | 
 | 		return -ENOTTY; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int i2cdev_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	unsigned int minor = iminor(inode); | 
 | 	struct i2c_client *client; | 
 | 	struct i2c_adapter *adap; | 
 | 	struct i2c_dev *i2c_dev; | 
 |  | 
 | 	i2c_dev = i2c_dev_get_by_minor(minor); | 
 | 	if (!i2c_dev) | 
 | 		return -ENODEV; | 
 |  | 
 | 	adap = i2c_get_adapter(i2c_dev->adap->nr); | 
 | 	if (!adap) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* This creates an anonymous i2c_client, which may later be | 
 | 	 * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE. | 
 | 	 * | 
 | 	 * This client is ** NEVER REGISTERED ** with the driver model | 
 | 	 * or I2C core code!!  It just holds private copies of addressing | 
 | 	 * information and maybe a PEC flag. | 
 | 	 */ | 
 | 	client = kzalloc(sizeof(*client), GFP_KERNEL); | 
 | 	if (!client) { | 
 | 		i2c_put_adapter(adap); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr); | 
 |  | 
 | 	client->adapter = adap; | 
 | 	file->private_data = client; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int i2cdev_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct i2c_client *client = file->private_data; | 
 |  | 
 | 	i2c_put_adapter(client->adapter); | 
 | 	kfree(client); | 
 | 	file->private_data = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct file_operations i2cdev_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.read		= i2cdev_read, | 
 | 	.write		= i2cdev_write, | 
 | 	.unlocked_ioctl	= i2cdev_ioctl, | 
 | 	.open		= i2cdev_open, | 
 | 	.release	= i2cdev_release, | 
 | }; | 
 |  | 
 | /* ------------------------------------------------------------------------- */ | 
 |  | 
 | static struct class *i2c_dev_class; | 
 |  | 
 | static int i2cdev_attach_adapter(struct device *dev, void *dummy) | 
 | { | 
 | 	struct i2c_adapter *adap; | 
 | 	struct i2c_dev *i2c_dev; | 
 | 	int res; | 
 |  | 
 | 	if (dev->type != &i2c_adapter_type) | 
 | 		return 0; | 
 | 	adap = to_i2c_adapter(dev); | 
 |  | 
 | 	i2c_dev = get_free_i2c_dev(adap); | 
 | 	if (IS_ERR(i2c_dev)) | 
 | 		return PTR_ERR(i2c_dev); | 
 |  | 
 | 	/* register this i2c device with the driver core */ | 
 | 	i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, | 
 | 				     MKDEV(I2C_MAJOR, adap->nr), NULL, | 
 | 				     "i2c-%d", adap->nr); | 
 | 	if (IS_ERR(i2c_dev->dev)) { | 
 | 		res = PTR_ERR(i2c_dev->dev); | 
 | 		goto error; | 
 | 	} | 
 | 	res = device_create_file(i2c_dev->dev, &dev_attr_name); | 
 | 	if (res) | 
 | 		goto error_destroy; | 
 |  | 
 | 	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", | 
 | 		 adap->name, adap->nr); | 
 | 	return 0; | 
 | error_destroy: | 
 | 	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); | 
 | error: | 
 | 	return_i2c_dev(i2c_dev); | 
 | 	return res; | 
 | } | 
 |  | 
 | static int i2cdev_detach_adapter(struct device *dev, void *dummy) | 
 | { | 
 | 	struct i2c_adapter *adap; | 
 | 	struct i2c_dev *i2c_dev; | 
 |  | 
 | 	if (dev->type != &i2c_adapter_type) | 
 | 		return 0; | 
 | 	adap = to_i2c_adapter(dev); | 
 |  | 
 | 	i2c_dev = i2c_dev_get_by_minor(adap->nr); | 
 | 	if (!i2c_dev) /* attach_adapter must have failed */ | 
 | 		return 0; | 
 |  | 
 | 	device_remove_file(i2c_dev->dev, &dev_attr_name); | 
 | 	return_i2c_dev(i2c_dev); | 
 | 	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); | 
 |  | 
 | 	pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, | 
 | 			 void *data) | 
 | { | 
 | 	struct device *dev = data; | 
 |  | 
 | 	switch (action) { | 
 | 	case BUS_NOTIFY_ADD_DEVICE: | 
 | 		return i2cdev_attach_adapter(dev, NULL); | 
 | 	case BUS_NOTIFY_DEL_DEVICE: | 
 | 		return i2cdev_detach_adapter(dev, NULL); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct notifier_block i2cdev_notifier = { | 
 | 	.notifier_call = i2cdev_notifier_call, | 
 | }; | 
 |  | 
 | /* ------------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * module load/unload record keeping | 
 |  */ | 
 |  | 
 | static int __init i2c_dev_init(void) | 
 | { | 
 | 	int res; | 
 |  | 
 | 	printk(KERN_INFO "i2c /dev entries driver\n"); | 
 |  | 
 | 	res = register_chrdev(I2C_MAJOR, "i2c", &i2cdev_fops); | 
 | 	if (res) | 
 | 		goto out; | 
 |  | 
 | 	i2c_dev_class = class_create(THIS_MODULE, "i2c-dev"); | 
 | 	if (IS_ERR(i2c_dev_class)) { | 
 | 		res = PTR_ERR(i2c_dev_class); | 
 | 		goto out_unreg_chrdev; | 
 | 	} | 
 |  | 
 | 	/* Keep track of adapters which will be added or removed later */ | 
 | 	res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier); | 
 | 	if (res) | 
 | 		goto out_unreg_class; | 
 |  | 
 | 	/* Bind to already existing adapters right away */ | 
 | 	i2c_for_each_dev(NULL, i2cdev_attach_adapter); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_unreg_class: | 
 | 	class_destroy(i2c_dev_class); | 
 | out_unreg_chrdev: | 
 | 	unregister_chrdev(I2C_MAJOR, "i2c"); | 
 | out: | 
 | 	printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__); | 
 | 	return res; | 
 | } | 
 |  | 
 | static void __exit i2c_dev_exit(void) | 
 | { | 
 | 	bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier); | 
 | 	i2c_for_each_dev(NULL, i2cdev_detach_adapter); | 
 | 	class_destroy(i2c_dev_class); | 
 | 	unregister_chrdev(I2C_MAJOR, "i2c"); | 
 | } | 
 |  | 
 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " | 
 | 		"Simon G. Vogl <simon@tk.uni-linz.ac.at>"); | 
 | MODULE_DESCRIPTION("I2C /dev entries driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_init(i2c_dev_init); | 
 | module_exit(i2c_dev_exit); |