|  | /****************************************************************************** | 
|  | * | 
|  | * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes) | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2000 - 2008, Intel Corp. | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  | #include <acpi/acpi.h> | 
|  | #include "accommon.h" | 
|  | #include "acinterp.h" | 
|  | #include "acnamesp.h" | 
|  | #include "actables.h" | 
|  | #include "acdispat.h" | 
|  | #include "acevents.h" | 
|  |  | 
|  | #define _COMPONENT          ACPI_EXECUTER | 
|  | ACPI_MODULE_NAME("exconfig") | 
|  |  | 
|  | /* Local prototypes */ | 
|  | static acpi_status | 
|  | acpi_ex_add_table(u32 table_index, | 
|  | struct acpi_namespace_node *parent_node, | 
|  | union acpi_operand_object **ddb_handle); | 
|  |  | 
|  | static acpi_status | 
|  | acpi_ex_region_read(union acpi_operand_object *obj_desc, | 
|  | u32 length, u8 *buffer); | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ex_add_table | 
|  | * | 
|  | * PARAMETERS:  Table               - Pointer to raw table | 
|  | *              parent_node         - Where to load the table (scope) | 
|  | *              ddb_handle          - Where to return the table handle. | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Common function to Install and Load an ACPI table with a | 
|  | *              returned table handle. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static acpi_status | 
|  | acpi_ex_add_table(u32 table_index, | 
|  | struct acpi_namespace_node *parent_node, | 
|  | union acpi_operand_object **ddb_handle) | 
|  | { | 
|  | acpi_status status; | 
|  | union acpi_operand_object *obj_desc; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(ex_add_table); | 
|  |  | 
|  | /* Create an object to be the table handle */ | 
|  |  | 
|  | obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE); | 
|  | if (!obj_desc) { | 
|  | return_ACPI_STATUS(AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | /* Init the table handle */ | 
|  |  | 
|  | obj_desc->common.flags |= AOPOBJ_DATA_VALID; | 
|  | obj_desc->reference.class = ACPI_REFCLASS_TABLE; | 
|  | *ddb_handle = obj_desc; | 
|  |  | 
|  | /* Install the new table into the local data structures */ | 
|  |  | 
|  | obj_desc->reference.value = table_index; | 
|  |  | 
|  | /* Add the table to the namespace */ | 
|  |  | 
|  | status = acpi_ns_load_table(table_index, parent_node); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | acpi_ut_remove_reference(obj_desc); | 
|  | *ddb_handle = NULL; | 
|  | } | 
|  |  | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ex_load_table_op | 
|  | * | 
|  | * PARAMETERS:  walk_state          - Current state with operands | 
|  | *              return_desc         - Where to store the return object | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Load an ACPI table from the RSDT/XSDT | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_ex_load_table_op(struct acpi_walk_state *walk_state, | 
|  | union acpi_operand_object **return_desc) | 
|  | { | 
|  | acpi_status status; | 
|  | union acpi_operand_object **operand = &walk_state->operands[0]; | 
|  | struct acpi_namespace_node *parent_node; | 
|  | struct acpi_namespace_node *start_node; | 
|  | struct acpi_namespace_node *parameter_node = NULL; | 
|  | union acpi_operand_object *ddb_handle; | 
|  | struct acpi_table_header *table; | 
|  | u32 table_index; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(ex_load_table_op); | 
|  |  | 
|  | /* Validate lengths for the signature_string, OEMIDString, OEMtable_iD */ | 
|  |  | 
|  | if ((operand[0]->string.length > ACPI_NAME_SIZE) || | 
|  | (operand[1]->string.length > ACPI_OEM_ID_SIZE) || | 
|  | (operand[2]->string.length > ACPI_OEM_TABLE_ID_SIZE)) { | 
|  | return_ACPI_STATUS(AE_BAD_PARAMETER); | 
|  | } | 
|  |  | 
|  | /* Find the ACPI table in the RSDT/XSDT */ | 
|  |  | 
|  | status = acpi_tb_find_table(operand[0]->string.pointer, | 
|  | operand[1]->string.pointer, | 
|  | operand[2]->string.pointer, &table_index); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | if (status != AE_NOT_FOUND) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Table not found, return an Integer=0 and AE_OK */ | 
|  |  | 
|  | ddb_handle = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); | 
|  | if (!ddb_handle) { | 
|  | return_ACPI_STATUS(AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | ddb_handle->integer.value = 0; | 
|  | *return_desc = ddb_handle; | 
|  |  | 
|  | return_ACPI_STATUS(AE_OK); | 
|  | } | 
|  |  | 
|  | /* Default nodes */ | 
|  |  | 
|  | start_node = walk_state->scope_info->scope.node; | 
|  | parent_node = acpi_gbl_root_node; | 
|  |  | 
|  | /* root_path (optional parameter) */ | 
|  |  | 
|  | if (operand[3]->string.length > 0) { | 
|  | /* | 
|  | * Find the node referenced by the root_path_string. This is the | 
|  | * location within the namespace where the table will be loaded. | 
|  | */ | 
|  | status = | 
|  | acpi_ns_get_node(start_node, operand[3]->string.pointer, | 
|  | ACPI_NS_SEARCH_PARENT, &parent_node); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* parameter_path (optional parameter) */ | 
|  |  | 
|  | if (operand[4]->string.length > 0) { | 
|  | if ((operand[4]->string.pointer[0] != '\\') && | 
|  | (operand[4]->string.pointer[0] != '^')) { | 
|  | /* | 
|  | * Path is not absolute, so it will be relative to the node | 
|  | * referenced by the root_path_string (or the NS root if omitted) | 
|  | */ | 
|  | start_node = parent_node; | 
|  | } | 
|  |  | 
|  | /* Find the node referenced by the parameter_path_string */ | 
|  |  | 
|  | status = | 
|  | acpi_ns_get_node(start_node, operand[4]->string.pointer, | 
|  | ACPI_NS_SEARCH_PARENT, ¶meter_node); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Load the table into the namespace */ | 
|  |  | 
|  | status = acpi_ex_add_table(table_index, parent_node, &ddb_handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Parameter Data (optional) */ | 
|  |  | 
|  | if (parameter_node) { | 
|  |  | 
|  | /* Store the parameter data into the optional parameter object */ | 
|  |  | 
|  | status = acpi_ex_store(operand[5], | 
|  | ACPI_CAST_PTR(union acpi_operand_object, | 
|  | parameter_node), | 
|  | walk_state); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | (void)acpi_ex_unload_table(ddb_handle); | 
|  |  | 
|  | acpi_ut_remove_reference(ddb_handle); | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  | } | 
|  |  | 
|  | status = acpi_get_table_by_index(table_index, &table); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | ACPI_INFO((AE_INFO, | 
|  | "Dynamic OEM Table Load - [%.4s] OemId [%.6s] OemTableId [%.8s]", | 
|  | table->signature, table->oem_id, | 
|  | table->oem_table_id)); | 
|  | } | 
|  |  | 
|  | /* Invoke table handler if present */ | 
|  |  | 
|  | if (acpi_gbl_table_handler) { | 
|  | (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table, | 
|  | acpi_gbl_table_handler_context); | 
|  | } | 
|  |  | 
|  | *return_desc = ddb_handle; | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ex_region_read | 
|  | * | 
|  | * PARAMETERS:  obj_desc        - Region descriptor | 
|  | *              Length          - Number of bytes to read | 
|  | *              Buffer          - Pointer to where to put the data | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Read data from an operation region. The read starts from the | 
|  | *              beginning of the region. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static acpi_status | 
|  | acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer) | 
|  | { | 
|  | acpi_status status; | 
|  | acpi_integer value; | 
|  | u32 region_offset = 0; | 
|  | u32 i; | 
|  |  | 
|  | /* Bytewise reads */ | 
|  |  | 
|  | for (i = 0; i < length; i++) { | 
|  | status = acpi_ev_address_space_dispatch(obj_desc, ACPI_READ, | 
|  | region_offset, 8, | 
|  | &value); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return status; | 
|  | } | 
|  |  | 
|  | *buffer = (u8)value; | 
|  | buffer++; | 
|  | region_offset++; | 
|  | } | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ex_load_op | 
|  | * | 
|  | * PARAMETERS:  obj_desc        - Region or Buffer/Field where the table will be | 
|  | *                                obtained | 
|  | *              Target          - Where a handle to the table will be stored | 
|  | *              walk_state      - Current state | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Load an ACPI table from a field or operation region | 
|  | * | 
|  | * NOTE: Region Fields (Field, bank_field, index_fields) are resolved to buffer | 
|  | *       objects before this code is reached. | 
|  | * | 
|  | *       If source is an operation region, it must refer to system_memory, as | 
|  | *       per the ACPI specification. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_ex_load_op(union acpi_operand_object *obj_desc, | 
|  | union acpi_operand_object *target, | 
|  | struct acpi_walk_state *walk_state) | 
|  | { | 
|  | union acpi_operand_object *ddb_handle; | 
|  | struct acpi_table_header *table; | 
|  | struct acpi_table_desc table_desc; | 
|  | u32 table_index; | 
|  | acpi_status status; | 
|  | u32 length; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(ex_load_op); | 
|  |  | 
|  | ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc)); | 
|  |  | 
|  | /* Source Object can be either an op_region or a Buffer/Field */ | 
|  |  | 
|  | switch (obj_desc->common.type) { | 
|  | case ACPI_TYPE_REGION: | 
|  |  | 
|  | ACPI_DEBUG_PRINT((ACPI_DB_EXEC, | 
|  | "Load table from Region %p\n", obj_desc)); | 
|  |  | 
|  | /* Region must be system_memory (from ACPI spec) */ | 
|  |  | 
|  | if (obj_desc->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { | 
|  | return_ACPI_STATUS(AE_AML_OPERAND_TYPE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the Region Address and Length have not been previously evaluated, | 
|  | * evaluate them now and save the results. | 
|  | */ | 
|  | if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { | 
|  | status = acpi_ds_get_region_arguments(obj_desc); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Get the table header first so we can get the table length */ | 
|  |  | 
|  | table = ACPI_ALLOCATE(sizeof(struct acpi_table_header)); | 
|  | if (!table) { | 
|  | return_ACPI_STATUS(AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | status = | 
|  | acpi_ex_region_read(obj_desc, | 
|  | sizeof(struct acpi_table_header), | 
|  | ACPI_CAST_PTR(u8, table)); | 
|  | length = table->length; | 
|  | ACPI_FREE(table); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Must have at least an ACPI table header */ | 
|  |  | 
|  | if (length < sizeof(struct acpi_table_header)) { | 
|  | return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The original implementation simply mapped the table, with no copy. | 
|  | * However, the memory region is not guaranteed to remain stable and | 
|  | * we must copy the table to a local buffer. For example, the memory | 
|  | * region is corrupted after suspend on some machines. Dynamically | 
|  | * loaded tables are usually small, so this overhead is minimal. | 
|  | * | 
|  | * The latest implementation (5/2009) does not use a mapping at all. | 
|  | * We use the low-level operation region interface to read the table | 
|  | * instead of the obvious optimization of using a direct mapping. | 
|  | * This maintains a consistent use of operation regions across the | 
|  | * entire subsystem. This is important if additional processing must | 
|  | * be performed in the (possibly user-installed) operation region | 
|  | * handler. For example, acpi_exec and ASLTS depend on this. | 
|  | */ | 
|  |  | 
|  | /* Allocate a buffer for the table */ | 
|  |  | 
|  | table_desc.pointer = ACPI_ALLOCATE(length); | 
|  | if (!table_desc.pointer) { | 
|  | return_ACPI_STATUS(AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | /* Read the entire table */ | 
|  |  | 
|  | status = acpi_ex_region_read(obj_desc, length, | 
|  | ACPI_CAST_PTR(u8, | 
|  | table_desc.pointer)); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ACPI_FREE(table_desc.pointer); | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | table_desc.address = obj_desc->region.address; | 
|  | break; | 
|  |  | 
|  | case ACPI_TYPE_BUFFER:	/* Buffer or resolved region_field */ | 
|  |  | 
|  | ACPI_DEBUG_PRINT((ACPI_DB_EXEC, | 
|  | "Load table from Buffer or Field %p\n", | 
|  | obj_desc)); | 
|  |  | 
|  | /* Must have at least an ACPI table header */ | 
|  |  | 
|  | if (obj_desc->buffer.length < sizeof(struct acpi_table_header)) { | 
|  | return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); | 
|  | } | 
|  |  | 
|  | /* Get the actual table length from the table header */ | 
|  |  | 
|  | table = | 
|  | ACPI_CAST_PTR(struct acpi_table_header, | 
|  | obj_desc->buffer.pointer); | 
|  | length = table->length; | 
|  |  | 
|  | /* Table cannot extend beyond the buffer */ | 
|  |  | 
|  | if (length > obj_desc->buffer.length) { | 
|  | return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); | 
|  | } | 
|  | if (length < sizeof(struct acpi_table_header)) { | 
|  | return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Copy the table from the buffer because the buffer could be modified | 
|  | * or even deleted in the future | 
|  | */ | 
|  | table_desc.pointer = ACPI_ALLOCATE(length); | 
|  | if (!table_desc.pointer) { | 
|  | return_ACPI_STATUS(AE_NO_MEMORY); | 
|  | } | 
|  |  | 
|  | ACPI_MEMCPY(table_desc.pointer, table, length); | 
|  | table_desc.address = ACPI_TO_INTEGER(table_desc.pointer); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return_ACPI_STATUS(AE_AML_OPERAND_TYPE); | 
|  | } | 
|  |  | 
|  | /* Validate table checksum (will not get validated in tb_add_table) */ | 
|  |  | 
|  | status = acpi_tb_verify_checksum(table_desc.pointer, length); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ACPI_FREE(table_desc.pointer); | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Complete the table descriptor */ | 
|  |  | 
|  | table_desc.length = length; | 
|  | table_desc.flags = ACPI_TABLE_ORIGIN_ALLOCATED; | 
|  |  | 
|  | /* Install the new table into the local data structures */ | 
|  |  | 
|  | status = acpi_tb_add_table(&table_desc, &table_index); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add the table to the namespace. | 
|  | * | 
|  | * Note: Load the table objects relative to the root of the namespace. | 
|  | * This appears to go against the ACPI specification, but we do it for | 
|  | * compatibility with other ACPI implementations. | 
|  | */ | 
|  | status = | 
|  | acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  |  | 
|  | /* On error, table_ptr was deallocated above */ | 
|  |  | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Store the ddb_handle into the Target operand */ | 
|  |  | 
|  | status = acpi_ex_store(ddb_handle, target, walk_state); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | (void)acpi_ex_unload_table(ddb_handle); | 
|  |  | 
|  | /* table_ptr was deallocated above */ | 
|  |  | 
|  | acpi_ut_remove_reference(ddb_handle); | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /* Remove the reference by added by acpi_ex_store above */ | 
|  |  | 
|  | acpi_ut_remove_reference(ddb_handle); | 
|  |  | 
|  | /* Invoke table handler if present */ | 
|  |  | 
|  | if (acpi_gbl_table_handler) { | 
|  | (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, | 
|  | table_desc.pointer, | 
|  | acpi_gbl_table_handler_context); | 
|  | } | 
|  |  | 
|  | cleanup: | 
|  | if (ACPI_FAILURE(status)) { | 
|  |  | 
|  | /* Delete allocated table buffer */ | 
|  |  | 
|  | acpi_tb_delete_table(&table_desc); | 
|  | } | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_ex_unload_table | 
|  | * | 
|  | * PARAMETERS:  ddb_handle          - Handle to a previously loaded table | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Unload an ACPI table | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) | 
|  | { | 
|  | acpi_status status = AE_OK; | 
|  | union acpi_operand_object *table_desc = ddb_handle; | 
|  | u32 table_index; | 
|  | struct acpi_table_header *table; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(ex_unload_table); | 
|  |  | 
|  | /* | 
|  | * Validate the handle | 
|  | * Although the handle is partially validated in acpi_ex_reconfiguration() | 
|  | * when it calls acpi_ex_resolve_operands(), the handle is more completely | 
|  | * validated here. | 
|  | * | 
|  | * Handle must be a valid operand object of type reference. Also, the | 
|  | * ddb_handle must still be marked valid (table has not been previously | 
|  | * unloaded) | 
|  | */ | 
|  | if ((!ddb_handle) || | 
|  | (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) || | 
|  | (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) || | 
|  | (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) { | 
|  | return_ACPI_STATUS(AE_BAD_PARAMETER); | 
|  | } | 
|  |  | 
|  | /* Get the table index from the ddb_handle */ | 
|  |  | 
|  | table_index = table_desc->reference.value; | 
|  |  | 
|  | /* Ensure the table is still loaded */ | 
|  |  | 
|  | if (!acpi_tb_is_table_loaded(table_index)) { | 
|  | return_ACPI_STATUS(AE_NOT_EXIST); | 
|  | } | 
|  |  | 
|  | /* Invoke table handler if present */ | 
|  |  | 
|  | if (acpi_gbl_table_handler) { | 
|  | status = acpi_get_table_by_index(table_index, &table); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD, | 
|  | table, | 
|  | acpi_gbl_table_handler_context); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Delete the portion of the namespace owned by this table */ | 
|  |  | 
|  | status = acpi_tb_delete_namespace_by_owner(table_index); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | (void)acpi_tb_release_owner_id(table_index); | 
|  | acpi_tb_set_table_loaded_flag(table_index, FALSE); | 
|  |  | 
|  | /* | 
|  | * Invalidate the handle. We do this because the handle may be stored | 
|  | * in a named object and may not be actually deleted until much later. | 
|  | */ | 
|  | ddb_handle->common.flags &= ~AOPOBJ_DATA_VALID; | 
|  | return_ACPI_STATUS(AE_OK); | 
|  | } |