|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #include "iwl-commands.h" | 
|  | #include "iwl-3945.h" | 
|  | #include "iwl-sta.h" | 
|  |  | 
|  | #define RS_NAME "iwl-3945-rs" | 
|  |  | 
|  | struct iwl3945_rate_scale_data { | 
|  | u64 data; | 
|  | s32 success_counter; | 
|  | s32 success_ratio; | 
|  | s32 counter; | 
|  | s32 average_tpt; | 
|  | unsigned long stamp; | 
|  | }; | 
|  |  | 
|  | struct iwl3945_rs_sta { | 
|  | spinlock_t lock; | 
|  | struct iwl_priv *priv; | 
|  | s32 *expected_tpt; | 
|  | unsigned long last_partial_flush; | 
|  | unsigned long last_flush; | 
|  | u32 flush_time; | 
|  | u32 last_tx_packets; | 
|  | u32 tx_packets; | 
|  | u8 tgg; | 
|  | u8 flush_pending; | 
|  | u8 start_rate; | 
|  | u8 ibss_sta_added; | 
|  | struct timer_list rate_scale_flush; | 
|  | struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945]; | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | struct dentry *rs_sta_dbgfs_stats_table_file; | 
|  | #endif | 
|  |  | 
|  | /* used to be in sta_info */ | 
|  | int last_txrate_idx; | 
|  | }; | 
|  |  | 
|  | static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = { | 
|  | 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202 | 
|  | }; | 
|  |  | 
|  | static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = { | 
|  | 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125 | 
|  | }; | 
|  |  | 
|  | static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = { | 
|  | 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186 | 
|  | }; | 
|  |  | 
|  | static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = { | 
|  | 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0 | 
|  | }; | 
|  |  | 
|  | struct iwl3945_tpt_entry { | 
|  | s8 min_rssi; | 
|  | u8 index; | 
|  | }; | 
|  |  | 
|  | static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = { | 
|  | {-60, IWL_RATE_54M_INDEX}, | 
|  | {-64, IWL_RATE_48M_INDEX}, | 
|  | {-72, IWL_RATE_36M_INDEX}, | 
|  | {-80, IWL_RATE_24M_INDEX}, | 
|  | {-84, IWL_RATE_18M_INDEX}, | 
|  | {-85, IWL_RATE_12M_INDEX}, | 
|  | {-87, IWL_RATE_9M_INDEX}, | 
|  | {-89, IWL_RATE_6M_INDEX} | 
|  | }; | 
|  |  | 
|  | static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = { | 
|  | {-60, IWL_RATE_54M_INDEX}, | 
|  | {-64, IWL_RATE_48M_INDEX}, | 
|  | {-68, IWL_RATE_36M_INDEX}, | 
|  | {-80, IWL_RATE_24M_INDEX}, | 
|  | {-84, IWL_RATE_18M_INDEX}, | 
|  | {-85, IWL_RATE_12M_INDEX}, | 
|  | {-86, IWL_RATE_11M_INDEX}, | 
|  | {-88, IWL_RATE_5M_INDEX}, | 
|  | {-90, IWL_RATE_2M_INDEX}, | 
|  | {-92, IWL_RATE_1M_INDEX} | 
|  | }; | 
|  |  | 
|  | #define IWL_RATE_MAX_WINDOW          62 | 
|  | #define IWL_RATE_FLUSH       	 (3*HZ) | 
|  | #define IWL_RATE_WIN_FLUSH       (HZ/2) | 
|  | #define IWL39_RATE_HIGH_TH          11520 | 
|  | #define IWL_SUCCESS_UP_TH	   8960 | 
|  | #define IWL_SUCCESS_DOWN_TH	  10880 | 
|  | #define IWL_RATE_MIN_FAILURE_TH       6 | 
|  | #define IWL_RATE_MIN_SUCCESS_TH       8 | 
|  | #define IWL_RATE_DECREASE_TH       1920 | 
|  | #define IWL_RATE_RETRY_TH	     15 | 
|  |  | 
|  | static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band) | 
|  | { | 
|  | u32 index = 0; | 
|  | u32 table_size = 0; | 
|  | struct iwl3945_tpt_entry *tpt_table = NULL; | 
|  |  | 
|  | if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL)) | 
|  | rssi = IWL_MIN_RSSI_VAL; | 
|  |  | 
|  | switch (band) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | tpt_table = iwl3945_tpt_table_g; | 
|  | table_size = ARRAY_SIZE(iwl3945_tpt_table_g); | 
|  | break; | 
|  |  | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | tpt_table = iwl3945_tpt_table_a; | 
|  | table_size = ARRAY_SIZE(iwl3945_tpt_table_a); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | BUG(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | while ((index < table_size) && (rssi < tpt_table[index].min_rssi)) | 
|  | index++; | 
|  |  | 
|  | index = min(index, (table_size - 1)); | 
|  |  | 
|  | return tpt_table[index].index; | 
|  | } | 
|  |  | 
|  | static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window) | 
|  | { | 
|  | window->data = 0; | 
|  | window->success_counter = 0; | 
|  | window->success_ratio = -1; | 
|  | window->counter = 0; | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  | window->stamp = 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl3945_rate_scale_flush_windows - flush out the rate scale windows | 
|  | * | 
|  | * Returns the number of windows that have gathered data but were | 
|  | * not flushed.  If there were any that were not flushed, then | 
|  | * reschedule the rate flushing routine. | 
|  | */ | 
|  | static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta) | 
|  | { | 
|  | int unflushed = 0; | 
|  | int i; | 
|  | unsigned long flags; | 
|  | struct iwl_priv *priv __maybe_unused = rs_sta->priv; | 
|  |  | 
|  | /* | 
|  | * For each rate, if we have collected data on that rate | 
|  | * and it has been more than IWL_RATE_WIN_FLUSH | 
|  | * since we flushed, clear out the gathered statistics | 
|  | */ | 
|  | for (i = 0; i < IWL_RATE_COUNT_3945; i++) { | 
|  | if (!rs_sta->win[i].counter) | 
|  | continue; | 
|  |  | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  | if (time_after(jiffies, rs_sta->win[i].stamp + | 
|  | IWL_RATE_WIN_FLUSH)) { | 
|  | IWL_DEBUG_RATE(priv, "flushing %d samples of rate " | 
|  | "index %d\n", | 
|  | rs_sta->win[i].counter, i); | 
|  | iwl3945_clear_window(&rs_sta->win[i]); | 
|  | } else | 
|  | unflushed++; | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  | } | 
|  |  | 
|  | return unflushed; | 
|  | } | 
|  |  | 
|  | #define IWL_RATE_FLUSH_MAX              5000	/* msec */ | 
|  | #define IWL_RATE_FLUSH_MIN              50	/* msec */ | 
|  | #define IWL_AVERAGE_PACKETS             1500 | 
|  |  | 
|  | static void iwl3945_bg_rate_scale_flush(unsigned long data) | 
|  | { | 
|  | struct iwl3945_rs_sta *rs_sta = (void *)data; | 
|  | struct iwl_priv *priv __maybe_unused = rs_sta->priv; | 
|  | int unflushed = 0; | 
|  | unsigned long flags; | 
|  | u32 packet_count, duration, pps; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | unflushed = iwl3945_rate_scale_flush_windows(rs_sta); | 
|  |  | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  |  | 
|  | /* Number of packets Rx'd since last time this timer ran */ | 
|  | packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1; | 
|  |  | 
|  | rs_sta->last_tx_packets = rs_sta->tx_packets + 1; | 
|  |  | 
|  | if (unflushed) { | 
|  | duration = | 
|  | jiffies_to_msecs(jiffies - rs_sta->last_partial_flush); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n", | 
|  | packet_count, duration); | 
|  |  | 
|  | /* Determine packets per second */ | 
|  | if (duration) | 
|  | pps = (packet_count * 1000) / duration; | 
|  | else | 
|  | pps = 0; | 
|  |  | 
|  | if (pps) { | 
|  | duration = (IWL_AVERAGE_PACKETS * 1000) / pps; | 
|  | if (duration < IWL_RATE_FLUSH_MIN) | 
|  | duration = IWL_RATE_FLUSH_MIN; | 
|  | else if (duration > IWL_RATE_FLUSH_MAX) | 
|  | duration = IWL_RATE_FLUSH_MAX; | 
|  | } else | 
|  | duration = IWL_RATE_FLUSH_MAX; | 
|  |  | 
|  | rs_sta->flush_time = msecs_to_jiffies(duration); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n", | 
|  | duration, packet_count); | 
|  |  | 
|  | mod_timer(&rs_sta->rate_scale_flush, jiffies + | 
|  | rs_sta->flush_time); | 
|  |  | 
|  | rs_sta->last_partial_flush = jiffies; | 
|  | } else { | 
|  | rs_sta->flush_time = IWL_RATE_FLUSH; | 
|  | rs_sta->flush_pending = 0; | 
|  | } | 
|  | /* If there weren't any unflushed entries, we don't schedule the timer | 
|  | * to run again */ | 
|  |  | 
|  | rs_sta->last_flush = jiffies; | 
|  |  | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl3945_collect_tx_data - Update the success/failure sliding window | 
|  | * | 
|  | * We keep a sliding window of the last 64 packets transmitted | 
|  | * at this rate.  window->data contains the bitmask of successful | 
|  | * packets. | 
|  | */ | 
|  | static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta, | 
|  | struct iwl3945_rate_scale_data *window, | 
|  | int success, int retries, int index) | 
|  | { | 
|  | unsigned long flags; | 
|  | s32 fail_count; | 
|  | struct iwl_priv *priv __maybe_unused = rs_sta->priv; | 
|  |  | 
|  | if (!retries) { | 
|  | IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  |  | 
|  | /* | 
|  | * Keep track of only the latest 62 tx frame attempts in this rate's | 
|  | * history window; anything older isn't really relevant any more. | 
|  | * If we have filled up the sliding window, drop the oldest attempt; | 
|  | * if the oldest attempt (highest bit in bitmap) shows "success", | 
|  | * subtract "1" from the success counter (this is the main reason | 
|  | * we keep these bitmaps!). | 
|  | * */ | 
|  | while (retries > 0) { | 
|  | if (window->counter >= IWL_RATE_MAX_WINDOW) { | 
|  |  | 
|  | /* remove earliest */ | 
|  | window->counter = IWL_RATE_MAX_WINDOW - 1; | 
|  |  | 
|  | if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) { | 
|  | window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1)); | 
|  | window->success_counter--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Increment frames-attempted counter */ | 
|  | window->counter++; | 
|  |  | 
|  | /* Shift bitmap by one frame (throw away oldest history), | 
|  | * OR in "1", and increment "success" if this | 
|  | * frame was successful. */ | 
|  | window->data <<= 1; | 
|  | if (success > 0) { | 
|  | window->success_counter++; | 
|  | window->data |= 0x1; | 
|  | success--; | 
|  | } | 
|  |  | 
|  | retries--; | 
|  | } | 
|  |  | 
|  | /* Calculate current success ratio, avoid divide-by-0! */ | 
|  | if (window->counter > 0) | 
|  | window->success_ratio = 128 * (100 * window->success_counter) | 
|  | / window->counter; | 
|  | else | 
|  | window->success_ratio = IWL_INVALID_VALUE; | 
|  |  | 
|  | fail_count = window->counter - window->success_counter; | 
|  |  | 
|  | /* Calculate average throughput, if we have enough history. */ | 
|  | if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || | 
|  | (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) | 
|  | window->average_tpt = ((window->success_ratio * | 
|  | rs_sta->expected_tpt[index] + 64) / 128); | 
|  | else | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | /* Tag this window as having been updated */ | 
|  | window->stamp = jiffies; | 
|  |  | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta) | 
|  | { | 
|  | struct iwl3945_rs_sta *rs_sta = priv_sta; | 
|  | struct iwl_priv *priv = (struct iwl_priv *)priv_r; | 
|  | int i; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | /* TODO: what is a good starting rate for STA? About middle? Maybe not | 
|  | * the lowest or the highest rate.. Could consider using RSSI from | 
|  | * previous packets? Need to have IEEE 802.1X auth succeed immediately | 
|  | * after assoc.. */ | 
|  |  | 
|  | for (i = sband->n_bitrates - 1; i >= 0; i--) { | 
|  | if (sta->supp_rates[sband->band] & (1 << i)) { | 
|  | rs_sta->last_txrate_idx = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->sta_supp_rates = sta->supp_rates[sband->band]; | 
|  | /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */ | 
|  | if (sband->band == IEEE80211_BAND_5GHZ) { | 
|  | rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; | 
|  | priv->sta_supp_rates = priv->sta_supp_rates << | 
|  | IWL_FIRST_OFDM_RATE; | 
|  | } | 
|  |  | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) | 
|  | { | 
|  | return hw->priv; | 
|  | } | 
|  |  | 
|  | /* rate scale requires free function to be implemented */ | 
|  | static void rs_free(void *priv) | 
|  | { | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp) | 
|  | { | 
|  | struct iwl3945_rs_sta *rs_sta; | 
|  | struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; | 
|  | struct iwl_priv *priv = iwl_priv; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * XXX: If it's using sta->drv_priv anyway, it might | 
|  | *	as well just put all the information there. | 
|  | */ | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp); | 
|  | if (!rs_sta) { | 
|  | IWL_DEBUG_RATE(priv, "leave: ENOMEM\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | psta->rs_sta = rs_sta; | 
|  |  | 
|  | spin_lock_init(&rs_sta->lock); | 
|  |  | 
|  | rs_sta->priv = priv; | 
|  |  | 
|  | rs_sta->start_rate = IWL_RATE_INVALID; | 
|  |  | 
|  | /* default to just 802.11b */ | 
|  | rs_sta->expected_tpt = iwl3945_expected_tpt_b; | 
|  |  | 
|  | rs_sta->last_partial_flush = jiffies; | 
|  | rs_sta->last_flush = jiffies; | 
|  | rs_sta->flush_time = IWL_RATE_FLUSH; | 
|  | rs_sta->last_tx_packets = 0; | 
|  | rs_sta->ibss_sta_added = 0; | 
|  |  | 
|  | init_timer(&rs_sta->rate_scale_flush); | 
|  | rs_sta->rate_scale_flush.data = (unsigned long)rs_sta; | 
|  | rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush; | 
|  |  | 
|  | for (i = 0; i < IWL_RATE_COUNT_3945; i++) | 
|  | iwl3945_clear_window(&rs_sta->win[i]); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  |  | 
|  | return rs_sta; | 
|  | } | 
|  |  | 
|  | static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta, | 
|  | void *priv_sta) | 
|  | { | 
|  | struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; | 
|  | struct iwl3945_rs_sta *rs_sta = priv_sta; | 
|  | struct iwl_priv *priv __maybe_unused = rs_sta->priv; | 
|  |  | 
|  | psta->rs_sta = NULL; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  | del_timer_sync(&rs_sta->rate_scale_flush); | 
|  | kfree(rs_sta); | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * rs_tx_status - Update rate control values based on Tx results | 
|  | * | 
|  | * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by | 
|  | * the hardware for each rate. | 
|  | */ | 
|  | static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | s8 retries = 0, current_count; | 
|  | int scale_rate_index, first_index, last_index; | 
|  | unsigned long flags; | 
|  | struct iwl_priv *priv = (struct iwl_priv *)priv_rate; | 
|  | struct iwl3945_rs_sta *rs_sta = priv_sta; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | retries = info->status.rates[0].count; | 
|  | /* Sanity Check for retries */ | 
|  | if (retries > IWL_RATE_RETRY_TH) | 
|  | retries = IWL_RATE_RETRY_TH; | 
|  |  | 
|  | first_index = sband->bitrates[info->status.rates[0].idx].hw_value; | 
|  | if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) { | 
|  | IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!priv_sta) { | 
|  | IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rs_sta->tx_packets++; | 
|  |  | 
|  | scale_rate_index = first_index; | 
|  | last_index = first_index; | 
|  |  | 
|  | /* | 
|  | * Update the window for each rate.  We determine which rates | 
|  | * were Tx'd based on the total number of retries vs. the number | 
|  | * of retries configured for each rate -- currently set to the | 
|  | * priv value 'retry_rate' vs. rate specific | 
|  | * | 
|  | * On exit from this while loop last_index indicates the rate | 
|  | * at which the frame was finally transmitted (or failed if no | 
|  | * ACK) | 
|  | */ | 
|  | while (retries > 1) { | 
|  | if ((retries - 1) < priv->retry_rate) { | 
|  | current_count = (retries - 1); | 
|  | last_index = scale_rate_index; | 
|  | } else { | 
|  | current_count = priv->retry_rate; | 
|  | last_index = iwl3945_rs_next_rate(priv, | 
|  | scale_rate_index); | 
|  | } | 
|  |  | 
|  | /* Update this rate accounting for as many retries | 
|  | * as was used for it (per current_count) */ | 
|  | iwl3945_collect_tx_data(rs_sta, | 
|  | &rs_sta->win[scale_rate_index], | 
|  | 0, current_count, scale_rate_index); | 
|  | IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n", | 
|  | scale_rate_index, current_count); | 
|  |  | 
|  | retries -= current_count; | 
|  |  | 
|  | scale_rate_index = last_index; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Update the last index window with success/failure based on ACK */ | 
|  | IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n", | 
|  | last_index, | 
|  | (info->flags & IEEE80211_TX_STAT_ACK) ? | 
|  | "success" : "failure"); | 
|  | iwl3945_collect_tx_data(rs_sta, | 
|  | &rs_sta->win[last_index], | 
|  | info->flags & IEEE80211_TX_STAT_ACK, 1, last_index); | 
|  |  | 
|  | /* We updated the rate scale window -- if its been more than | 
|  | * flush_time since the last run, schedule the flush | 
|  | * again */ | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  |  | 
|  | if (!rs_sta->flush_pending && | 
|  | time_after(jiffies, rs_sta->last_flush + | 
|  | rs_sta->flush_time)) { | 
|  |  | 
|  | rs_sta->last_partial_flush = jiffies; | 
|  | rs_sta->flush_pending = 1; | 
|  | mod_timer(&rs_sta->rate_scale_flush, | 
|  | jiffies + rs_sta->flush_time); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, | 
|  | u8 index, u16 rate_mask, enum ieee80211_band band) | 
|  | { | 
|  | u8 high = IWL_RATE_INVALID; | 
|  | u8 low = IWL_RATE_INVALID; | 
|  | struct iwl_priv *priv __maybe_unused = rs_sta->priv; | 
|  |  | 
|  | /* 802.11A walks to the next literal adjacent rate in | 
|  | * the rate table */ | 
|  | if (unlikely(band == IEEE80211_BAND_5GHZ)) { | 
|  | int i; | 
|  | u32 mask; | 
|  |  | 
|  | /* Find the previous rate that is in the rate mask */ | 
|  | i = index - 1; | 
|  | for (mask = (1 << i); i >= 0; i--, mask >>= 1) { | 
|  | if (rate_mask & mask) { | 
|  | low = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find the next rate that is in the rate mask */ | 
|  | i = index + 1; | 
|  | for (mask = (1 << i); i < IWL_RATE_COUNT_3945; | 
|  | i++, mask <<= 1) { | 
|  | if (rate_mask & mask) { | 
|  | high = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | low = index; | 
|  | while (low != IWL_RATE_INVALID) { | 
|  | if (rs_sta->tgg) | 
|  | low = iwl3945_rates[low].prev_rs_tgg; | 
|  | else | 
|  | low = iwl3945_rates[low].prev_rs; | 
|  | if (low == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << low)) | 
|  | break; | 
|  | IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); | 
|  | } | 
|  |  | 
|  | high = index; | 
|  | while (high != IWL_RATE_INVALID) { | 
|  | if (rs_sta->tgg) | 
|  | high = iwl3945_rates[high].next_rs_tgg; | 
|  | else | 
|  | high = iwl3945_rates[high].next_rs; | 
|  | if (high == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << high)) | 
|  | break; | 
|  | IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_get_rate - find the rate for the requested packet | 
|  | * | 
|  | * Returns the ieee80211_rate structure allocated by the driver. | 
|  | * | 
|  | * The rate control algorithm has no internal mapping between hw_mode's | 
|  | * rate ordering and the rate ordering used by the rate control algorithm. | 
|  | * | 
|  | * The rate control algorithm uses a single table of rates that goes across | 
|  | * the entire A/B/G spectrum vs. being limited to just one particular | 
|  | * hw_mode. | 
|  | * | 
|  | * As such, we can't convert the index obtained below into the hw_mode's | 
|  | * rate table and must reference the driver allocated rate table | 
|  | * | 
|  | */ | 
|  | static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, | 
|  | void *priv_sta,	struct ieee80211_tx_rate_control *txrc) | 
|  | { | 
|  | struct ieee80211_supported_band *sband = txrc->sband; | 
|  | struct sk_buff *skb = txrc->skb; | 
|  | u8 low = IWL_RATE_INVALID; | 
|  | u8 high = IWL_RATE_INVALID; | 
|  | u16 high_low; | 
|  | int index; | 
|  | struct iwl3945_rs_sta *rs_sta = priv_sta; | 
|  | struct iwl3945_rate_scale_data *window = NULL; | 
|  | int current_tpt = IWL_INVALID_VALUE; | 
|  | int low_tpt = IWL_INVALID_VALUE; | 
|  | int high_tpt = IWL_INVALID_VALUE; | 
|  | u32 fail_count; | 
|  | s8 scale_action = 0; | 
|  | unsigned long flags; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | u16 fc; | 
|  | u16 rate_mask = 0; | 
|  | s8 max_rate_idx = -1; | 
|  | struct iwl_priv *priv = (struct iwl_priv *)priv_r; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | if (sta) | 
|  | rate_mask = sta->supp_rates[sband->band]; | 
|  |  | 
|  | /* Send management frames and NO_ACK data using lowest rate. */ | 
|  | fc = le16_to_cpu(hdr->frame_control); | 
|  | if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || | 
|  | info->flags & IEEE80211_TX_CTL_NO_ACK || | 
|  | !sta || !priv_sta) { | 
|  | IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n"); | 
|  | if (!rate_mask) | 
|  | info->control.rates[0].idx = | 
|  | rate_lowest_index(sband, NULL); | 
|  | else | 
|  | info->control.rates[0].idx = | 
|  | rate_lowest_index(sband, sta); | 
|  | if (info->flags & IEEE80211_TX_CTL_NO_ACK) | 
|  | info->control.rates[0].count = 1; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* get user max rate if set */ | 
|  | max_rate_idx = txrc->max_rate_idx; | 
|  | if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1)) | 
|  | max_rate_idx += IWL_FIRST_OFDM_RATE; | 
|  | if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT)) | 
|  | max_rate_idx = -1; | 
|  |  | 
|  | index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1); | 
|  |  | 
|  | if (sband->band == IEEE80211_BAND_5GHZ) | 
|  | rate_mask = rate_mask << IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && | 
|  | !rs_sta->ibss_sta_added) { | 
|  | u8 sta_id = iwl_find_station(priv, hdr->addr1); | 
|  |  | 
|  | if (sta_id == IWL_INVALID_STATION) { | 
|  | IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n", | 
|  | hdr->addr1); | 
|  | sta_id = iwl_add_station(priv, hdr->addr1, false, | 
|  | CMD_ASYNC, NULL); | 
|  | } | 
|  | if (sta_id != IWL_INVALID_STATION) | 
|  | rs_sta->ibss_sta_added = 1; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  |  | 
|  | /* for recent assoc, choose best rate regarding | 
|  | * to rssi value | 
|  | */ | 
|  | if (rs_sta->start_rate != IWL_RATE_INVALID) { | 
|  | if (rs_sta->start_rate < index && | 
|  | (rate_mask & (1 << rs_sta->start_rate))) | 
|  | index = rs_sta->start_rate; | 
|  | rs_sta->start_rate = IWL_RATE_INVALID; | 
|  | } | 
|  |  | 
|  | /* force user max rate if set by user */ | 
|  | if ((max_rate_idx != -1) && (max_rate_idx < index)) { | 
|  | if (rate_mask & (1 << max_rate_idx)) | 
|  | index = max_rate_idx; | 
|  | } | 
|  |  | 
|  | window = &(rs_sta->win[index]); | 
|  |  | 
|  | fail_count = window->counter - window->success_counter; | 
|  |  | 
|  | if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && | 
|  | (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) { | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: " | 
|  | "counter: %d, success_counter: %d, " | 
|  | "expected_tpt is %sNULL\n", | 
|  | index, | 
|  | window->counter, | 
|  | window->success_counter, | 
|  | rs_sta->expected_tpt ? "not " : ""); | 
|  |  | 
|  | /* Can't calculate this yet; not enough history */ | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  | goto out; | 
|  |  | 
|  | } | 
|  |  | 
|  | current_tpt = window->average_tpt; | 
|  |  | 
|  | high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask, | 
|  | sband->band); | 
|  | low = high_low & 0xff; | 
|  | high = (high_low >> 8) & 0xff; | 
|  |  | 
|  | /* If user set max rate, dont allow higher than user constrain */ | 
|  | if ((max_rate_idx != -1) && (max_rate_idx < high)) | 
|  | high = IWL_RATE_INVALID; | 
|  |  | 
|  | /* Collect Measured throughputs of adjacent rates */ | 
|  | if (low != IWL_RATE_INVALID) | 
|  | low_tpt = rs_sta->win[low].average_tpt; | 
|  |  | 
|  | if (high != IWL_RATE_INVALID) | 
|  | high_tpt = rs_sta->win[high].average_tpt; | 
|  |  | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | scale_action = 0; | 
|  |  | 
|  | /* Low success ratio , need to drop the rate */ | 
|  | if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) { | 
|  | IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); | 
|  | scale_action = -1; | 
|  | /* No throughput measured yet for adjacent rates, | 
|  | * try increase */ | 
|  | } else if ((low_tpt == IWL_INVALID_VALUE) && | 
|  | (high_tpt == IWL_INVALID_VALUE)) { | 
|  |  | 
|  | if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH) | 
|  | scale_action = 1; | 
|  | else if (low != IWL_RATE_INVALID) | 
|  | scale_action = 0; | 
|  |  | 
|  | /* Both adjacent throughputs are measured, but neither one has | 
|  | * better throughput; we're using the best rate, don't change | 
|  | * it! */ | 
|  | } else if ((low_tpt != IWL_INVALID_VALUE) && | 
|  | (high_tpt != IWL_INVALID_VALUE) && | 
|  | (low_tpt < current_tpt) && (high_tpt < current_tpt)) { | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < " | 
|  | "current_tpt [%d]\n", | 
|  | low_tpt, high_tpt, current_tpt); | 
|  | scale_action = 0; | 
|  |  | 
|  | /* At least one of the rates has better throughput */ | 
|  | } else { | 
|  | if (high_tpt != IWL_INVALID_VALUE) { | 
|  |  | 
|  | /* High rate has better throughput, Increase | 
|  | * rate */ | 
|  | if (high_tpt > current_tpt && | 
|  | window->success_ratio >= IWL_RATE_INCREASE_TH) | 
|  | scale_action = 1; | 
|  | else { | 
|  | IWL_DEBUG_RATE(priv, | 
|  | "decrease rate because of high tpt\n"); | 
|  | scale_action = 0; | 
|  | } | 
|  | } else if (low_tpt != IWL_INVALID_VALUE) { | 
|  | if (low_tpt > current_tpt) { | 
|  | IWL_DEBUG_RATE(priv, | 
|  | "decrease rate because of low tpt\n"); | 
|  | scale_action = -1; | 
|  | } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) { | 
|  | /* Lower rate has better | 
|  | * throughput,decrease rate */ | 
|  | scale_action = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Sanity check; asked for decrease, but success rate or throughput | 
|  | * has been good at old rate.  Don't change it. */ | 
|  | if ((scale_action == -1) && (low != IWL_RATE_INVALID) && | 
|  | ((window->success_ratio > IWL_RATE_HIGH_TH) || | 
|  | (current_tpt > (100 * rs_sta->expected_tpt[low])))) | 
|  | scale_action = 0; | 
|  |  | 
|  | switch (scale_action) { | 
|  | case -1: | 
|  |  | 
|  | /* Decrese rate */ | 
|  | if (low != IWL_RATE_INVALID) | 
|  | index = low; | 
|  | break; | 
|  |  | 
|  | case 1: | 
|  | /* Increase rate */ | 
|  | if (high != IWL_RATE_INVALID) | 
|  | index = high; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case 0: | 
|  | default: | 
|  | /* No change */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n", | 
|  | index, scale_action, low, high); | 
|  |  | 
|  | out: | 
|  |  | 
|  | rs_sta->last_txrate_idx = index; | 
|  | if (sband->band == IEEE80211_BAND_5GHZ) | 
|  | info->control.rates[0].idx = rs_sta->last_txrate_idx - | 
|  | IWL_FIRST_OFDM_RATE; | 
|  | else | 
|  | info->control.rates[0].idx = rs_sta->last_txrate_idx; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave: %d\n", index); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | static int iwl3945_open_file_generic(struct inode *inode, struct file *file) | 
|  | { | 
|  | file->private_data = inode->i_private; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file, | 
|  | char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buff; | 
|  | int desc = 0; | 
|  | int j; | 
|  | ssize_t ret; | 
|  | struct iwl3945_rs_sta *lq_sta = file->private_data; | 
|  |  | 
|  | buff = kmalloc(1024, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n" | 
|  | "rate=0x%X flush time %d\n", | 
|  | lq_sta->tx_packets, | 
|  | lq_sta->last_txrate_idx, | 
|  | lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time)); | 
|  | for (j = 0; j < IWL_RATE_COUNT_3945; j++) { | 
|  | desc += sprintf(buff+desc, | 
|  | "counter=%d success=%d %%=%d\n", | 
|  | lq_sta->win[j].counter, | 
|  | lq_sta->win[j].success_counter, | 
|  | lq_sta->win[j].success_ratio); | 
|  | } | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_stats_table_ops = { | 
|  | .read = iwl3945_sta_dbgfs_stats_table_read, | 
|  | .open = iwl3945_open_file_generic, | 
|  | }; | 
|  |  | 
|  | static void iwl3945_add_debugfs(void *priv, void *priv_sta, | 
|  | struct dentry *dir) | 
|  | { | 
|  | struct iwl3945_rs_sta *lq_sta = priv_sta; | 
|  |  | 
|  | lq_sta->rs_sta_dbgfs_stats_table_file = | 
|  | debugfs_create_file("rate_stats_table", 0600, dir, | 
|  | lq_sta, &rs_sta_dbgfs_stats_table_ops); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void iwl3945_remove_debugfs(void *priv, void *priv_sta) | 
|  | { | 
|  | struct iwl3945_rs_sta *lq_sta = priv_sta; | 
|  | debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static struct rate_control_ops rs_ops = { | 
|  | .module = NULL, | 
|  | .name = RS_NAME, | 
|  | .tx_status = rs_tx_status, | 
|  | .get_rate = rs_get_rate, | 
|  | .rate_init = rs_rate_init, | 
|  | .alloc = rs_alloc, | 
|  | .free = rs_free, | 
|  | .alloc_sta = rs_alloc_sta, | 
|  | .free_sta = rs_free_sta, | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | .add_sta_debugfs = iwl3945_add_debugfs, | 
|  | .remove_sta_debugfs = iwl3945_remove_debugfs, | 
|  | #endif | 
|  |  | 
|  | }; | 
|  |  | 
|  | void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | s32 rssi = 0; | 
|  | unsigned long flags; | 
|  | struct iwl3945_rs_sta *rs_sta; | 
|  | struct ieee80211_sta *sta; | 
|  | struct iwl3945_sta_priv *psta; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | psta = (void *) sta->drv_priv; | 
|  | rs_sta = psta->rs_sta; | 
|  |  | 
|  | spin_lock_irqsave(&rs_sta->lock, flags); | 
|  |  | 
|  | rs_sta->tgg = 0; | 
|  | switch (priv->band) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | /* TODO: this always does G, not a regression */ | 
|  | if (priv->active_rxon.flags & RXON_FLG_TGG_PROTECT_MSK) { | 
|  | rs_sta->tgg = 1; | 
|  | rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot; | 
|  | } else | 
|  | rs_sta->expected_tpt = iwl3945_expected_tpt_g; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | rs_sta->expected_tpt = iwl3945_expected_tpt_a; | 
|  | break; | 
|  | case IEEE80211_NUM_BANDS: | 
|  | BUG(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&rs_sta->lock, flags); | 
|  |  | 
|  | rssi = priv->last_rx_rssi; | 
|  | if (rssi == 0) | 
|  | rssi = IWL_MIN_RSSI_VAL; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi); | 
|  |  | 
|  | rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: " | 
|  | "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate, | 
|  | iwl3945_rates[rs_sta->start_rate].plcp); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | int iwl3945_rate_control_register(void) | 
|  | { | 
|  | return ieee80211_rate_control_register(&rs_ops); | 
|  | } | 
|  |  | 
|  | void iwl3945_rate_control_unregister(void) | 
|  | { | 
|  | ieee80211_rate_control_unregister(&rs_ops); | 
|  | } | 
|  |  | 
|  |  |