|  | /* | 
|  | * NetChip 2280 high/full speed USB device controller. | 
|  | * Unlike many such controllers, this one talks PCI. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) | 
|  | * Copyright (C) 2003 David Brownell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  |  | 
|  | #include <linux/usb/net2280.h> | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | #ifdef	__KERNEL__ | 
|  |  | 
|  | /* indexed registers [11.10] are accessed indirectly | 
|  | * caller must own the device lock. | 
|  | */ | 
|  |  | 
|  | static inline u32 | 
|  | get_idx_reg (struct net2280_regs __iomem *regs, u32 index) | 
|  | { | 
|  | writel (index, ®s->idxaddr); | 
|  | /* NOTE:  synchs device/cpu memory views */ | 
|  | return readl (®s->idxdata); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) | 
|  | { | 
|  | writel (index, ®s->idxaddr); | 
|  | writel (value, ®s->idxdata); | 
|  | /* posted, may not be visible yet */ | 
|  | } | 
|  |  | 
|  | #endif	/* __KERNEL__ */ | 
|  |  | 
|  |  | 
|  | #define REG_DIAG		0x0 | 
|  | #define     RETRY_COUNTER                                       16 | 
|  | #define     FORCE_PCI_SERR                                      11 | 
|  | #define     FORCE_PCI_INTERRUPT                                 10 | 
|  | #define     FORCE_USB_INTERRUPT                                 9 | 
|  | #define     FORCE_CPU_INTERRUPT                                 8 | 
|  | #define     ILLEGAL_BYTE_ENABLES                                5 | 
|  | #define     FAST_TIMES                                          4 | 
|  | #define     FORCE_RECEIVE_ERROR                                 2 | 
|  | #define     FORCE_TRANSMIT_CRC_ERROR                            0 | 
|  | #define REG_FRAME		0x02	/* from last sof */ | 
|  | #define REG_CHIPREV		0x03	/* in bcd */ | 
|  | #define	REG_HS_NAK_RATE		0x0a	/* NAK per N uframes */ | 
|  |  | 
|  | #define	CHIPREV_1	0x0100 | 
|  | #define	CHIPREV_1A	0x0110 | 
|  |  | 
|  | #ifdef	__KERNEL__ | 
|  |  | 
|  | /* ep a-f highspeed and fullspeed maxpacket, addresses | 
|  | * computed from ep->num | 
|  | */ | 
|  | #define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \ | 
|  | (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1)) | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* [8.3] for scatter/gather i/o | 
|  | * use struct net2280_dma_regs bitfields | 
|  | */ | 
|  | struct net2280_dma { | 
|  | __le32		dmacount; | 
|  | __le32		dmaaddr;		/* the buffer */ | 
|  | __le32		dmadesc;		/* next dma descriptor */ | 
|  | __le32		_reserved; | 
|  | } __attribute__ ((aligned (16))); | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* DRIVER DATA STRUCTURES and UTILITIES */ | 
|  |  | 
|  | struct net2280_ep { | 
|  | struct usb_ep				ep; | 
|  | struct net2280_ep_regs			__iomem *regs; | 
|  | struct net2280_dma_regs			__iomem *dma; | 
|  | struct net2280_dma			*dummy; | 
|  | dma_addr_t				td_dma;	/* of dummy */ | 
|  | struct net2280				*dev; | 
|  | unsigned long				irqs; | 
|  |  | 
|  | /* analogous to a host-side qh */ | 
|  | struct list_head			queue; | 
|  | const struct usb_endpoint_descriptor	*desc; | 
|  | unsigned				num : 8, | 
|  | fifo_size : 12, | 
|  | in_fifo_validate : 1, | 
|  | out_overflow : 1, | 
|  | stopped : 1, | 
|  | wedged : 1, | 
|  | is_in : 1, | 
|  | is_iso : 1, | 
|  | responded : 1; | 
|  | }; | 
|  |  | 
|  | static inline void allow_status (struct net2280_ep *ep) | 
|  | { | 
|  | /* ep0 only */ | 
|  | writel (  (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 
|  | | (1 << CLEAR_NAK_OUT_PACKETS) | 
|  | | (1 << CLEAR_NAK_OUT_PACKETS_MODE) | 
|  | , &ep->regs->ep_rsp); | 
|  | ep->stopped = 1; | 
|  | } | 
|  |  | 
|  | /* count (<= 4) bytes in the next fifo write will be valid */ | 
|  | static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) | 
|  | { | 
|  | writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); | 
|  | } | 
|  |  | 
|  | struct net2280_request { | 
|  | struct usb_request		req; | 
|  | struct net2280_dma		*td; | 
|  | dma_addr_t			td_dma; | 
|  | struct list_head		queue; | 
|  | unsigned			mapped : 1, | 
|  | valid : 1; | 
|  | }; | 
|  |  | 
|  | struct net2280 { | 
|  | /* each pci device provides one gadget, several endpoints */ | 
|  | struct usb_gadget		gadget; | 
|  | spinlock_t			lock; | 
|  | struct net2280_ep		ep [7]; | 
|  | struct usb_gadget_driver 	*driver; | 
|  | unsigned			enabled : 1, | 
|  | protocol_stall : 1, | 
|  | softconnect : 1, | 
|  | got_irq : 1, | 
|  | region : 1; | 
|  | u16				chiprev; | 
|  |  | 
|  | /* pci state used to access those endpoints */ | 
|  | struct pci_dev			*pdev; | 
|  | struct net2280_regs		__iomem *regs; | 
|  | struct net2280_usb_regs		__iomem *usb; | 
|  | struct net2280_pci_regs		__iomem *pci; | 
|  | struct net2280_dma_regs		__iomem *dma; | 
|  | struct net2280_dep_regs		__iomem *dep; | 
|  | struct net2280_ep_regs		__iomem *epregs; | 
|  |  | 
|  | struct pci_pool			*requests; | 
|  | // statistics... | 
|  | }; | 
|  |  | 
|  | static inline void set_halt (struct net2280_ep *ep) | 
|  | { | 
|  | /* ep0 and bulk/intr endpoints */ | 
|  | writel (  (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 
|  | /* set NAK_OUT for erratum 0114 */ | 
|  | | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | 
|  | | (1 << SET_ENDPOINT_HALT) | 
|  | , &ep->regs->ep_rsp); | 
|  | } | 
|  |  | 
|  | static inline void clear_halt (struct net2280_ep *ep) | 
|  | { | 
|  | /* ep0 and bulk/intr endpoints */ | 
|  | writel (  (1 << CLEAR_ENDPOINT_HALT) | 
|  | | (1 << CLEAR_ENDPOINT_TOGGLE) | 
|  | /* unless the gadget driver left a short packet in the | 
|  | * fifo, this reverses the erratum 0114 workaround. | 
|  | */ | 
|  | | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS) | 
|  | , &ep->regs->ep_rsp); | 
|  | } | 
|  |  | 
|  | #ifdef USE_RDK_LEDS | 
|  |  | 
|  | static inline void net2280_led_init (struct net2280 *dev) | 
|  | { | 
|  | /* LED3 (green) is on during USB activity. note erratum 0113. */ | 
|  | writel ((1 << GPIO3_LED_SELECT) | 
|  | | (1 << GPIO3_OUTPUT_ENABLE) | 
|  | | (1 << GPIO2_OUTPUT_ENABLE) | 
|  | | (1 << GPIO1_OUTPUT_ENABLE) | 
|  | | (1 << GPIO0_OUTPUT_ENABLE) | 
|  | , &dev->regs->gpioctl); | 
|  | } | 
|  |  | 
|  | /* indicate speed with bi-color LED 0/1 */ | 
|  | static inline | 
|  | void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) | 
|  | { | 
|  | u32	val = readl (&dev->regs->gpioctl); | 
|  | switch (speed) { | 
|  | case USB_SPEED_HIGH:		/* green */ | 
|  | val &= ~(1 << GPIO0_DATA); | 
|  | val |= (1 << GPIO1_DATA); | 
|  | break; | 
|  | case USB_SPEED_FULL:		/* red */ | 
|  | val &= ~(1 << GPIO1_DATA); | 
|  | val |= (1 << GPIO0_DATA); | 
|  | break; | 
|  | default:			/* (off/black) */ | 
|  | val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA)); | 
|  | break; | 
|  | } | 
|  | writel (val, &dev->regs->gpioctl); | 
|  | } | 
|  |  | 
|  | /* indicate power with LED 2 */ | 
|  | static inline void net2280_led_active (struct net2280 *dev, int is_active) | 
|  | { | 
|  | u32	val = readl (&dev->regs->gpioctl); | 
|  |  | 
|  | // FIXME this LED never seems to turn on. | 
|  | if (is_active) | 
|  | val |= GPIO2_DATA; | 
|  | else | 
|  | val &= ~GPIO2_DATA; | 
|  | writel (val, &dev->regs->gpioctl); | 
|  | } | 
|  | static inline void net2280_led_shutdown (struct net2280 *dev) | 
|  | { | 
|  | /* turn off all four GPIO*_DATA bits */ | 
|  | writel (readl (&dev->regs->gpioctl) & ~0x0f, | 
|  | &dev->regs->gpioctl); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define net2280_led_init(dev)		do { } while (0) | 
|  | #define net2280_led_speed(dev, speed)	do { } while (0) | 
|  | #define net2280_led_shutdown(dev)	do { } while (0) | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | #define xprintk(dev,level,fmt,args...) \ | 
|  | printk(level "%s %s: " fmt , driver_name , \ | 
|  | pci_name(dev->pdev) , ## args) | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #undef DEBUG | 
|  | #define DEBUG(dev,fmt,args...) \ | 
|  | xprintk(dev , KERN_DEBUG , fmt , ## args) | 
|  | #else | 
|  | #define DEBUG(dev,fmt,args...) \ | 
|  | do { } while (0) | 
|  | #endif /* DEBUG */ | 
|  |  | 
|  | #ifdef VERBOSE | 
|  | #define VDEBUG DEBUG | 
|  | #else | 
|  | #define VDEBUG(dev,fmt,args...) \ | 
|  | do { } while (0) | 
|  | #endif	/* VERBOSE */ | 
|  |  | 
|  | #define ERROR(dev,fmt,args...) \ | 
|  | xprintk(dev , KERN_ERR , fmt , ## args) | 
|  | #define WARNING(dev,fmt,args...) \ | 
|  | xprintk(dev , KERN_WARNING , fmt , ## args) | 
|  | #define INFO(dev,fmt,args...) \ | 
|  | xprintk(dev , KERN_INFO , fmt , ## args) | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static inline void start_out_naking (struct net2280_ep *ep) | 
|  | { | 
|  | /* NOTE:  hardware races lurk here, and PING protocol issues */ | 
|  | writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); | 
|  | /* synch with device */ | 
|  | readl (&ep->regs->ep_rsp); | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static inline void assert_out_naking (struct net2280_ep *ep, const char *where) | 
|  | { | 
|  | u32	tmp = readl (&ep->regs->ep_stat); | 
|  |  | 
|  | if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { | 
|  | DEBUG (ep->dev, "%s %s %08x !NAK\n", | 
|  | ep->ep.name, where, tmp); | 
|  | writel ((1 << SET_NAK_OUT_PACKETS), | 
|  | &ep->regs->ep_rsp); | 
|  | } | 
|  | } | 
|  | #define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__func__) | 
|  | #else | 
|  | #define ASSERT_OUT_NAKING(ep) do {} while (0) | 
|  | #endif | 
|  |  | 
|  | static inline void stop_out_naking (struct net2280_ep *ep) | 
|  | { | 
|  | u32	tmp; | 
|  |  | 
|  | tmp = readl (&ep->regs->ep_stat); | 
|  | if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) | 
|  | writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); | 
|  | } | 
|  |  | 
|  | #endif	/* __KERNEL__ */ |