| /* Copyright (c) 2011 Bosch Sensortec GmbH |
| Copyright (c) 2011 Unixphere |
| |
| Based on: |
| BMP085 driver, bmp085.c |
| Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include "bmp18x.h" |
| |
| static int bmp18x_i2c_read_block(void *client, u8 reg, int len, char *buf) |
| { |
| return i2c_smbus_read_i2c_block_data(client, reg, len, buf); |
| } |
| |
| static int bmp18x_i2c_read_byte(void *client, u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int bmp18x_i2c_write_byte(void *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static const struct bmp18x_bus_ops bmp18x_i2c_bus_ops = { |
| .read_block = bmp18x_i2c_read_block, |
| .read_byte = bmp18x_i2c_read_byte, |
| .write_byte = bmp18x_i2c_write_byte |
| }; |
| |
| static int __devinit bmp18x_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct bmp18x_data_bus data_bus = { |
| .bops = &bmp18x_i2c_bus_ops, |
| .client = client |
| }; |
| |
| return bmp18x_probe(&client->dev, &data_bus); |
| } |
| |
| static void bmp18x_i2c_shutdown(struct i2c_client *client) |
| { |
| bmp18x_disable(&client->dev); |
| } |
| |
| static int bmp18x_i2c_remove(struct i2c_client *client) |
| { |
| return bmp18x_remove(&client->dev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int bmp18x_i2c_suspend(struct device *dev) |
| { |
| return bmp18x_disable(dev); |
| } |
| |
| static int bmp18x_i2c_resume(struct device *dev) |
| { |
| return bmp18x_enable(dev); |
| } |
| |
| static const struct dev_pm_ops bmp18x_i2c_pm_ops = { |
| .suspend = bmp18x_i2c_suspend, |
| .resume = bmp18x_i2c_resume |
| }; |
| #endif |
| |
| static const struct i2c_device_id bmp18x_id[] = { |
| { BMP18X_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, bmp18x_id); |
| |
| static struct i2c_driver bmp18x_i2c_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = BMP18X_NAME, |
| #ifdef CONFIG_PM |
| .pm = &bmp18x_i2c_pm_ops, |
| #endif |
| }, |
| .id_table = bmp18x_id, |
| .probe = bmp18x_i2c_probe, |
| .shutdown = bmp18x_i2c_shutdown, |
| .remove = __devexit_p(bmp18x_i2c_remove) |
| }; |
| |
| static int __init bmp18x_i2c_init(void) |
| { |
| return i2c_add_driver(&bmp18x_i2c_driver); |
| } |
| |
| static void __exit bmp18x_i2c_exit(void) |
| { |
| i2c_del_driver(&bmp18x_i2c_driver); |
| } |
| |
| |
| MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>"); |
| MODULE_DESCRIPTION("BMP18X I2C bus driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(bmp18x_i2c_init); |
| module_exit(bmp18x_i2c_exit); |