|  | /* linux/drivers/mmc/host/sdhci-pxa.c | 
|  | * | 
|  | * Copyright (C) 2010 Marvell International Ltd. | 
|  | *		Zhangfei Gao <zhangfei.gao@marvell.com> | 
|  | *		Kevin Wang <dwang4@marvell.com> | 
|  | *		Mingwei Wang <mwwang@marvell.com> | 
|  | *		Philip Rakity <prakity@marvell.com> | 
|  | *		Mark Brown <markb@marvell.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | /* Supports: | 
|  | * SDHCI support for MMP2/PXA910/PXA168 | 
|  | * | 
|  | * Refer to sdhci-s3c.c. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/err.h> | 
|  | #include <plat/sdhci.h> | 
|  | #include "sdhci.h" | 
|  |  | 
|  | #define DRIVER_NAME	"sdhci-pxa" | 
|  |  | 
|  | #define SD_FIFO_PARAM		0x104 | 
|  | #define DIS_PAD_SD_CLK_GATE	0x400 | 
|  |  | 
|  | struct sdhci_pxa { | 
|  | struct sdhci_host		*host; | 
|  | struct sdhci_pxa_platdata	*pdata; | 
|  | struct clk			*clk; | 
|  | struct resource			*res; | 
|  |  | 
|  | u8 clk_enable; | 
|  | }; | 
|  |  | 
|  | /*****************************************************************************\ | 
|  | *                                                                           * | 
|  | * SDHCI core callbacks                                                      * | 
|  | *                                                                           * | 
|  | \*****************************************************************************/ | 
|  | static void set_clock(struct sdhci_host *host, unsigned int clock) | 
|  | { | 
|  | struct sdhci_pxa *pxa = sdhci_priv(host); | 
|  | u32 tmp = 0; | 
|  |  | 
|  | if (clock == 0) { | 
|  | if (pxa->clk_enable) { | 
|  | clk_disable(pxa->clk); | 
|  | pxa->clk_enable = 0; | 
|  | } | 
|  | } else { | 
|  | if (0 == pxa->clk_enable) { | 
|  | if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) { | 
|  | tmp = readl(host->ioaddr + SD_FIFO_PARAM); | 
|  | tmp |= DIS_PAD_SD_CLK_GATE; | 
|  | writel(tmp, host->ioaddr + SD_FIFO_PARAM); | 
|  | } | 
|  | clk_enable(pxa->clk); | 
|  | pxa->clk_enable = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct sdhci_ops sdhci_pxa_ops = { | 
|  | .set_clock = set_clock, | 
|  | }; | 
|  |  | 
|  | /*****************************************************************************\ | 
|  | *                                                                           * | 
|  | * Device probing/removal                                                    * | 
|  | *                                                                           * | 
|  | \*****************************************************************************/ | 
|  |  | 
|  | static int __devinit sdhci_pxa_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct sdhci_host *host = NULL; | 
|  | struct resource *iomem = NULL; | 
|  | struct sdhci_pxa *pxa = NULL; | 
|  | int ret, irq; | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(dev, "no irq specified\n"); | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!iomem) { | 
|  | dev_err(dev, "no memory specified\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa)); | 
|  | if (IS_ERR(host)) { | 
|  | dev_err(dev, "failed to alloc host\n"); | 
|  | return PTR_ERR(host); | 
|  | } | 
|  |  | 
|  | pxa = sdhci_priv(host); | 
|  | pxa->host = host; | 
|  | pxa->pdata = pdata; | 
|  | pxa->clk_enable = 0; | 
|  |  | 
|  | pxa->clk = clk_get(dev, "PXA-SDHCLK"); | 
|  | if (IS_ERR(pxa->clk)) { | 
|  | dev_err(dev, "failed to get io clock\n"); | 
|  | ret = PTR_ERR(pxa->clk); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | pxa->res = request_mem_region(iomem->start, resource_size(iomem), | 
|  | mmc_hostname(host->mmc)); | 
|  | if (!pxa->res) { | 
|  | dev_err(&pdev->dev, "cannot request region\n"); | 
|  | ret = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | host->ioaddr = ioremap(iomem->start, resource_size(iomem)); | 
|  | if (!host->ioaddr) { | 
|  | dev_err(&pdev->dev, "failed to remap registers\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | host->hw_name = "MMC"; | 
|  | host->ops = &sdhci_pxa_ops; | 
|  | host->irq = irq; | 
|  | host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; | 
|  |  | 
|  | if (pdata->quirks) | 
|  | host->quirks |= pdata->quirks; | 
|  |  | 
|  | /* If slot design supports 8 bit data, indicate this to MMC. */ | 
|  | if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) | 
|  | host->mmc->caps |= MMC_CAP_8_BIT_DATA; | 
|  |  | 
|  | ret = sdhci_add_host(host); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "failed to add host\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (pxa->pdata->max_speed) | 
|  | host->mmc->f_max = pxa->pdata->max_speed; | 
|  |  | 
|  | platform_set_drvdata(pdev, host); | 
|  |  | 
|  | return 0; | 
|  | out: | 
|  | if (host) { | 
|  | clk_put(pxa->clk); | 
|  | if (host->ioaddr) | 
|  | iounmap(host->ioaddr); | 
|  | if (pxa->res) | 
|  | release_mem_region(pxa->res->start, | 
|  | resource_size(pxa->res)); | 
|  | sdhci_free_host(host); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit sdhci_pxa_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct sdhci_host *host = platform_get_drvdata(pdev); | 
|  | struct sdhci_pxa *pxa = sdhci_priv(host); | 
|  | int dead = 0; | 
|  | u32 scratch; | 
|  |  | 
|  | if (host) { | 
|  | scratch = readl(host->ioaddr + SDHCI_INT_STATUS); | 
|  | if (scratch == (u32)-1) | 
|  | dead = 1; | 
|  |  | 
|  | sdhci_remove_host(host, dead); | 
|  |  | 
|  | if (host->ioaddr) | 
|  | iounmap(host->ioaddr); | 
|  | if (pxa->res) | 
|  | release_mem_region(pxa->res->start, | 
|  | resource_size(pxa->res)); | 
|  | if (pxa->clk_enable) { | 
|  | clk_disable(pxa->clk); | 
|  | pxa->clk_enable = 0; | 
|  | } | 
|  | clk_put(pxa->clk); | 
|  |  | 
|  | sdhci_free_host(host); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state) | 
|  | { | 
|  | struct sdhci_host *host = platform_get_drvdata(dev); | 
|  |  | 
|  | return sdhci_suspend_host(host, state); | 
|  | } | 
|  |  | 
|  | static int sdhci_pxa_resume(struct platform_device *dev) | 
|  | { | 
|  | struct sdhci_host *host = platform_get_drvdata(dev); | 
|  |  | 
|  | return sdhci_resume_host(host); | 
|  | } | 
|  | #else | 
|  | #define sdhci_pxa_suspend	NULL | 
|  | #define sdhci_pxa_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver sdhci_pxa_driver = { | 
|  | .probe		= sdhci_pxa_probe, | 
|  | .remove		= __devexit_p(sdhci_pxa_remove), | 
|  | .suspend	= sdhci_pxa_suspend, | 
|  | .resume		= sdhci_pxa_resume, | 
|  | .driver		= { | 
|  | .name	= DRIVER_NAME, | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /*****************************************************************************\ | 
|  | *                                                                           * | 
|  | * Driver init/exit                                                          * | 
|  | *                                                                           * | 
|  | \*****************************************************************************/ | 
|  |  | 
|  | static int __init sdhci_pxa_init(void) | 
|  | { | 
|  | return platform_driver_register(&sdhci_pxa_driver); | 
|  | } | 
|  |  | 
|  | static void __exit sdhci_pxa_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&sdhci_pxa_driver); | 
|  | } | 
|  |  | 
|  | module_init(sdhci_pxa_init); | 
|  | module_exit(sdhci_pxa_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2"); | 
|  | MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>"); | 
|  | MODULE_LICENSE("GPL v2"); |