| /* |
| * FarSync X21 driver for Linux |
| * |
| * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards |
| * |
| * Copyright (C) 2001 FarSite Communications Ltd. |
| * www.farsite.co.uk |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk> |
| * |
| * For the most part this file only contains structures and information |
| * that is visible to applications outside the driver. Shared memory |
| * layout etc is internal to the driver and described within farsync.c. |
| * Overlap exists in that the values used for some fields within the |
| * ioctl interface extend into the cards firmware interface so values in |
| * this file may not be changed arbitrarily. |
| */ |
| |
| /* What's in a name |
| * |
| * The project name for this driver is Oscar. The driver is intended to be |
| * used with the FarSite T-Series cards (T2P & T4P) running in the high |
| * speed frame shifter mode. This is sometimes referred to as X.21 mode |
| * which is a complete misnomer as the card continues to support V.24 and |
| * V.35 as well as X.21. |
| * |
| * A short common prefix is useful for routines within the driver to avoid |
| * conflict with other similar drivers and I chosen to use "fst_" for this |
| * purpose (FarSite T-series). |
| * |
| * Finally the device driver needs a short network interface name. Since |
| * "hdlc" is already in use I've chosen the even less informative "sync" |
| * for the present. |
| */ |
| #define FST_NAME "fst" /* In debug/info etc */ |
| #define FST_NDEV_NAME "sync" /* For net interface */ |
| #define FST_DEV_NAME "farsync" /* For misc interfaces */ |
| |
| |
| /* User version number |
| * |
| * This version number is incremented with each official release of the |
| * package and is a simplified number for normal user reference. |
| * Individual files are tracked by the version control system and may |
| * have individual versions (or IDs) that move much faster than the |
| * the release version as individual updates are tracked. |
| */ |
| #define FST_USER_VERSION "1.04" |
| |
| |
| /* Ioctl call command values |
| */ |
| #define FSTWRITE (SIOCDEVPRIVATE+10) |
| #define FSTCPURESET (SIOCDEVPRIVATE+11) |
| #define FSTCPURELEASE (SIOCDEVPRIVATE+12) |
| #define FSTGETCONF (SIOCDEVPRIVATE+13) |
| #define FSTSETCONF (SIOCDEVPRIVATE+14) |
| |
| |
| /* FSTWRITE |
| * |
| * Used to write a block of data (firmware etc) before the card is running |
| */ |
| struct fstioc_write { |
| unsigned int size; |
| unsigned int offset; |
| unsigned char data[0]; |
| }; |
| |
| |
| /* FSTCPURESET and FSTCPURELEASE |
| * |
| * These take no additional data. |
| * FSTCPURESET forces the cards CPU into a reset state and holds it there. |
| * FSTCPURELEASE releases the CPU from this reset state allowing it to run, |
| * the reset vector should be setup before this ioctl is run. |
| */ |
| |
| /* FSTGETCONF and FSTSETCONF |
| * |
| * Get and set a card/ports configuration. |
| * In order to allow selective setting of items and for the kernel to |
| * indicate a partial status response the first field "valid" is a bitmask |
| * indicating which other fields in the structure are valid. |
| * Many of the field names in this structure match those used in the |
| * firmware shared memory configuration interface and come originally from |
| * the NT header file Smc.h |
| * |
| * When used with FSTGETCONF this structure should be zeroed before use. |
| * This is to allow for possible future expansion when some of the fields |
| * might be used to indicate a different (expanded) structure. |
| */ |
| struct fstioc_info { |
| unsigned int valid; /* Bits of structure that are valid */ |
| unsigned int nports; /* Number of serial ports */ |
| unsigned int type; /* Type index of card */ |
| unsigned int state; /* State of card */ |
| unsigned int index; /* Index of port ioctl was issued on */ |
| unsigned int smcFirmwareVersion; |
| unsigned long kernelVersion; /* What Kernel version we are working with */ |
| unsigned short lineInterface; /* Physical interface type */ |
| unsigned char proto; /* Line protocol */ |
| unsigned char internalClock; /* 1 => internal clock, 0 => external */ |
| unsigned int lineSpeed; /* Speed in bps */ |
| unsigned int v24IpSts; /* V.24 control input status */ |
| unsigned int v24OpSts; /* V.24 control output status */ |
| unsigned short clockStatus; /* lsb: 0=> present, 1=> absent */ |
| unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */ |
| unsigned short cardMode; /* lsb: LED id mode */ |
| unsigned short debug; /* Debug flags */ |
| unsigned char transparentMode; /* Not used always 0 */ |
| unsigned char invertClock; /* Invert clock feature for syncing */ |
| unsigned char startingSlot; /* Time slot to use for start of tx */ |
| unsigned char clockSource; /* External or internal */ |
| unsigned char framing; /* E1, T1 or J1 */ |
| unsigned char structure; /* unframed, double, crc4, f4, f12, */ |
| /* f24 f72 */ |
| unsigned char interface; /* rj48c or bnc */ |
| unsigned char coding; /* hdb3 b8zs */ |
| unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */ |
| unsigned char equalizer; /* short or lon haul settings */ |
| unsigned char loopMode; /* various loopbacks */ |
| unsigned char range; /* cable lengths */ |
| unsigned char txBufferMode; /* tx elastic buffer depth */ |
| unsigned char rxBufferMode; /* rx elastic buffer depth */ |
| unsigned char losThreshold; /* Attenuation on LOS signal */ |
| unsigned char idleCode; /* Value to send as idle timeslot */ |
| unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */ |
| unsigned int framingErrorCount; /* framing errors */ |
| unsigned int codeViolationCount; /* code violations */ |
| unsigned int crcErrorCount; /* CRC errors */ |
| int lineAttenuation; /* in dB*/ |
| unsigned short lossOfSignal; |
| unsigned short receiveRemoteAlarm; |
| unsigned short alarmIndicationSignal; |
| }; |
| |
| /* "valid" bitmask */ |
| #define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not running). |
| * Slight misnomer. In fact nports, |
| * type, state and index will be set |
| * based on hardware detected. |
| */ |
| #define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the |
| * output status bits defined for |
| * v24OpSts |
| */ |
| #define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed, clockStatus |
| */ |
| #define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */ |
| #define FSTVAL_IMODEM 0x00000080 /* v24IpSts */ |
| #define FSTVAL_CARD 0x00000100 /* nports, type, state, index, |
| * smcFirmwareVersion |
| */ |
| #define FSTVAL_PROTO 0x00000200 /* proto */ |
| #define FSTVAL_MODE 0x00000400 /* cardMode */ |
| #define FSTVAL_PHASE 0x00000800 /* Clock phase */ |
| #define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */ |
| #define FSTVAL_DEBUG 0x80000000 /* debug */ |
| #define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */ |
| |
| /* "type" */ |
| #define FST_TYPE_NONE 0 /* Probably should never happen */ |
| #define FST_TYPE_T2P 1 /* T2P X21 2 port card */ |
| #define FST_TYPE_T4P 2 /* T4P X21 4 port card */ |
| #define FST_TYPE_T1U 3 /* T1U X21 1 port card */ |
| #define FST_TYPE_T2U 4 /* T2U X21 2 port card */ |
| #define FST_TYPE_T4U 5 /* T4U X21 4 port card */ |
| #define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */ |
| |
| /* "family" */ |
| #define FST_FAMILY_TXP 0 /* T2P or T4P */ |
| #define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */ |
| |
| /* "state" */ |
| #define FST_UNINIT 0 /* Raw uninitialised state following |
| * system startup */ |
| #define FST_RESET 1 /* Processor held in reset state */ |
| #define FST_DOWNLOAD 2 /* Card being downloaded */ |
| #define FST_STARTING 3 /* Released following download */ |
| #define FST_RUNNING 4 /* Processor running */ |
| #define FST_BADVERSION 5 /* Bad shared memory version detected */ |
| #define FST_HALTED 6 /* Processor flagged a halt */ |
| #define FST_IFAILED 7 /* Firmware issued initialisation failed |
| * interrupt |
| */ |
| /* "lineInterface" */ |
| #define V24 1 |
| #define X21 2 |
| #define V35 3 |
| #define X21D 4 |
| #define T1 5 |
| #define E1 6 |
| #define J1 7 |
| |
| /* "proto" */ |
| #define FST_RAW 4 /* Two way raw packets */ |
| #define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */ |
| |
| /* "internalClock" */ |
| #define INTCLK 1 |
| #define EXTCLK 0 |
| |
| /* "v24IpSts" bitmask */ |
| #define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */ |
| #define IPSTS_INDICATE IPSTS_CTS |
| #define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */ |
| #define IPSTS_DCD 0x00000004 /* Data Carrier Detect */ |
| #define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */ |
| #define IPSTS_TMI 0x00000010 /* Test Mode Indicator (Not Supported)*/ |
| |
| /* "v24OpSts" bitmask */ |
| #define OPSTS_RTS 0x00000001 /* Request To Send (Control for X.21) */ |
| #define OPSTS_CONTROL OPSTS_RTS |
| #define OPSTS_DTR 0x00000002 /* Data Terminal Ready */ |
| #define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not |
| * Supported) */ |
| #define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */ |
| #define OPSTS_LL 0x00000010 /* Maintenance Test (Not Supported) */ |
| |
| /* "cardMode" bitmask */ |
| #define CARD_MODE_IDENTIFY 0x0001 |
| |
| /* |
| * Constants for T1/E1 configuration |
| */ |
| |
| /* |
| * Clock source |
| */ |
| #define CLOCKING_SLAVE 0 |
| #define CLOCKING_MASTER 1 |
| |
| /* |
| * Framing |
| */ |
| #define FRAMING_E1 0 |
| #define FRAMING_J1 1 |
| #define FRAMING_T1 2 |
| |
| /* |
| * Structure |
| */ |
| #define STRUCTURE_UNFRAMED 0 |
| #define STRUCTURE_E1_DOUBLE 1 |
| #define STRUCTURE_E1_CRC4 2 |
| #define STRUCTURE_E1_CRC4M 3 |
| #define STRUCTURE_T1_4 4 |
| #define STRUCTURE_T1_12 5 |
| #define STRUCTURE_T1_24 6 |
| #define STRUCTURE_T1_72 7 |
| |
| /* |
| * Interface |
| */ |
| #define INTERFACE_RJ48C 0 |
| #define INTERFACE_BNC 1 |
| |
| /* |
| * Coding |
| */ |
| |
| #define CODING_HDB3 0 |
| #define CODING_NRZ 1 |
| #define CODING_CMI 2 |
| #define CODING_CMI_HDB3 3 |
| #define CODING_CMI_B8ZS 4 |
| #define CODING_AMI 5 |
| #define CODING_AMI_ZCS 6 |
| #define CODING_B8ZS 7 |
| |
| /* |
| * Line Build Out |
| */ |
| #define LBO_0dB 0 |
| #define LBO_7dB5 1 |
| #define LBO_15dB 2 |
| #define LBO_22dB5 3 |
| |
| /* |
| * Range for long haul t1 > 655ft |
| */ |
| #define RANGE_0_133_FT 0 |
| #define RANGE_0_40_M RANGE_0_133_FT |
| #define RANGE_133_266_FT 1 |
| #define RANGE_40_81_M RANGE_133_266_FT |
| #define RANGE_266_399_FT 2 |
| #define RANGE_81_122_M RANGE_266_399_FT |
| #define RANGE_399_533_FT 3 |
| #define RANGE_122_162_M RANGE_399_533_FT |
| #define RANGE_533_655_FT 4 |
| #define RANGE_162_200_M RANGE_533_655_FT |
| /* |
| * Receive Equaliser |
| */ |
| #define EQUALIZER_SHORT 0 |
| #define EQUALIZER_LONG 1 |
| |
| /* |
| * Loop modes |
| */ |
| #define LOOP_NONE 0 |
| #define LOOP_LOCAL 1 |
| #define LOOP_PAYLOAD_EXC_TS0 2 |
| #define LOOP_PAYLOAD_INC_TS0 3 |
| #define LOOP_REMOTE 4 |
| |
| /* |
| * Buffer modes |
| */ |
| #define BUFFER_2_FRAME 0 |
| #define BUFFER_1_FRAME 1 |
| #define BUFFER_96_BIT 2 |
| #define BUFFER_NONE 3 |
| |
| /* Debug support |
| * |
| * These should only be enabled for development kernels, production code |
| * should define FST_DEBUG=0 in order to exclude the code. |
| * Setting FST_DEBUG=1 will include all the debug code but in a disabled |
| * state, use the FSTSETCONF ioctl to enable specific debug actions, or |
| * FST_DEBUG can be set to prime the debug selection. |
| */ |
| #define FST_DEBUG 0x0000 |
| #if FST_DEBUG |
| |
| extern int fst_debug_mask; /* Bit mask of actions to debug, bits |
| * listed below. Note: Bit 0 is used |
| * to trigger the inclusion of this |
| * code, without enabling any actions. |
| */ |
| #define DBG_INIT 0x0002 /* Card detection and initialisation */ |
| #define DBG_OPEN 0x0004 /* Open and close sequences */ |
| #define DBG_PCI 0x0008 /* PCI config operations */ |
| #define DBG_IOCTL 0x0010 /* Ioctls and other config */ |
| #define DBG_INTR 0x0020 /* Interrupt routines (be careful) */ |
| #define DBG_TX 0x0040 /* Packet transmission */ |
| #define DBG_RX 0x0080 /* Packet reception */ |
| #define DBG_CMD 0x0100 /* Port command issuing */ |
| |
| #define DBG_ASS 0xFFFF /* Assert like statements. Code that |
| * should never be reached, if you see |
| * one of these then I've been an ass |
| */ |
| #endif /* FST_DEBUG */ |
| |