msm7627a: Board file changes to support CAD sound devices
CAD(Common Application Devices) support is added on modem.
Add CAD sound device list in board file to support the same.
Change-Id: If794eb077c20f258068569a29664526c8375e70e
Signed-off-by: Manish Dewangan <manish@codeaurora.org>
(cherry picked from commit 1c0fa49d34c2b756b4d47cb473b66b262739b84f)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm7x27a.c b/arch/arm/mach-msm/board-msm7x27a.c
index 91f1aae..110e326 100644
--- a/arch/arm/mach-msm/board-msm7x27a.c
+++ b/arch/arm/mach-msm/board-msm7x27a.c
@@ -63,6 +63,13 @@
#define PMEM_KERNEL_EBI1_SIZE 0x3A000
#define MSM_PMEM_AUDIO_SIZE 0x1F4000
+#define SNDDEV_CAP_NONE 0x0
+#define SNDDEV_CAP_RX 0x1 /* RX direction */
+#define SNDDEV_CAP_TX 0x2 /* TX direction */
+#define SNDDEV_CAP_VOICE 0x4 /* Support voice call */
+#define SNDDEV_CAP_FM 0x10 /* Support FM radio */
+#define SNDDEV_CAP_TTY 0x20 /* Support TTY */
+
#if defined(CONFIG_GPIO_SX150X)
enum {
SX150X_CORE,
@@ -494,7 +501,6 @@
SND(FM_ANALOG_STEREO_HEADSET_CODEC, 36),
};
#undef SND
-
static struct msm_snd_endpoints msm_device_snd_endpoints = {
.endpoints = snd_endpoints_list,
.num = sizeof(snd_endpoints_list) / sizeof(struct snd_endpoint)
@@ -508,6 +514,55 @@
},
};
+#define CAD(desc, num, cap) { .name = #desc, .id = num, .capability = cap, }
+static struct cad_endpoint cad_endpoints_list[] = {
+ CAD(NONE, 0, SNDDEV_CAP_NONE),
+ CAD(HANDSET_SPKR, 1, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(HANDSET_MIC, 2, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(HEADSET_MIC, 3, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(HEADSET_SPKR_MONO, 4, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(HEADSET_SPKR_STEREO, 5, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(SPEAKER_PHONE_MIC, 6, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(SPEAKER_PHONE_MONO, 7, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(SPEAKER_PHONE_STEREO, 8, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(BT_SCO_MIC, 9, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(BT_SCO_SPKR, 10, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(BT_A2DP_SPKR, 11, (SNDDEV_CAP_RX | SNDDEV_CAP_VOICE)),
+ CAD(TTY_HEADSET_MIC, 12, (SNDDEV_CAP_TX | \
+ SNDDEV_CAP_VOICE | SNDDEV_CAP_TTY)),
+ CAD(TTY_HEADSET_SPKR, 13, (SNDDEV_CAP_RX | \
+ SNDDEV_CAP_VOICE | SNDDEV_CAP_TTY)),
+ CAD(HEADSET_STEREO_PLUS_SPKR_MONO_RX, 19, (SNDDEV_CAP_TX | \
+ SNDDEV_CAP_VOICE)),
+ CAD(LP_FM_HEADSET_SPKR_STEREO_RX, 25, (SNDDEV_CAP_TX | SNDDEV_CAP_FM)),
+ CAD(I2S_RX, 26, (SNDDEV_CAP_RX)),
+ CAD(SPEAKER_PHONE_MIC_ENDFIRE, 45, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(HANDSET_MIC_ENDFIRE, 46, (SNDDEV_CAP_TX | SNDDEV_CAP_VOICE)),
+ CAD(I2S_TX, 48, (SNDDEV_CAP_TX)),
+ CAD(LP_FM_HEADSET_SPKR_STEREO_PLUS_HEADSET_SPKR_STEREO_RX, 57, \
+ (SNDDEV_CAP_FM | SNDDEV_CAP_RX)),
+ CAD(FM_DIGITAL_HEADSET_SPKR_STEREO, 65, \
+ (SNDDEV_CAP_FM | SNDDEV_CAP_RX)),
+ CAD(FM_DIGITAL_SPEAKER_PHONE_MONO, 67, \
+ (SNDDEV_CAP_FM | SNDDEV_CAP_RX)),
+ CAD(FM_DIGITAL_BT_A2DP_SPKR, 69, \
+ (SNDDEV_CAP_FM | SNDDEV_CAP_RX)),
+ CAD(MAX, 80, SNDDEV_CAP_NONE),
+};
+#undef CAD
+static struct msm_cad_endpoints msm_device_cad_endpoints = {
+ .endpoints = cad_endpoints_list,
+ .num = sizeof(cad_endpoints_list) / sizeof(struct cad_endpoint)
+};
+
+static struct platform_device msm_device_cad = {
+ .name = "msm_cad",
+ .id = -1,
+ .dev = {
+ .platform_data = &msm_device_cad_endpoints
+ },
+};
+
#define DEC0_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
@@ -838,6 +893,7 @@
&android_pmem_audio_device,
&msm_device_nand,
&msm_device_snd,
+ &msm_device_cad,
&msm_device_adspdec,
&asoc_msm_pcm,
&asoc_msm_dai0,