|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * Portions of this file are derived from the ipw3945 project, as well | 
|  | * as portions of the ieee80211 subsystem header files. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | * James P. Ketrenos <ipw2100-admin@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * NOTE:  This file (iwl-base.c) is used to build to multiple hardware targets | 
|  | * by defining IWL to either 3945 or 4965.  The Makefile used when building | 
|  | * the base targets will create base-3945.o and base-4965.o | 
|  | * | 
|  | * The eventual goal is to move as many of the #if IWL / #endif blocks out of | 
|  | * this file and into the hardware specific implementation files (iwl-XXXX.c) | 
|  | * and leave only the common (non #ifdef sprinkled) code in this file | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/version.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  |  | 
|  | #include <net/ieee80211_radiotap.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | #define IWL 4965 | 
|  |  | 
|  | #include "iwlwifi.h" | 
|  | #include "iwl-4965.h" | 
|  | #include "iwl-helpers.h" | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | u32 iwl_debug_level; | 
|  | #endif | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * module boiler plate | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | /* module parameters */ | 
|  | int iwl_param_disable_hw_scan; | 
|  | int iwl_param_debug; | 
|  | int iwl_param_disable;      /* def: enable radio */ | 
|  | int iwl_param_antenna;      /* def: 0 = both antennas (use diversity) */ | 
|  | int iwl_param_hwcrypto;     /* def: using software encryption */ | 
|  | int iwl_param_qos_enable = 1; | 
|  | int iwl_param_queues_num = IWL_MAX_NUM_QUEUES; | 
|  |  | 
|  | /* | 
|  | * module name, copyright, version, etc. | 
|  | * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk | 
|  | */ | 
|  |  | 
|  | #define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link 4965AGN driver for Linux" | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | #define VD "d" | 
|  | #else | 
|  | #define VD | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT | 
|  | #define VS "s" | 
|  | #else | 
|  | #define VS | 
|  | #endif | 
|  |  | 
|  | #define IWLWIFI_VERSION "1.1.17k" VD VS | 
|  | #define DRV_COPYRIGHT	"Copyright(c) 2003-2007 Intel Corporation" | 
|  | #define DRV_VERSION     IWLWIFI_VERSION | 
|  |  | 
|  | /* Change firmware file name, using "-" and incrementing number, | 
|  | *   *only* when uCode interface or architecture changes so that it | 
|  | *   is not compatible with earlier drivers. | 
|  | * This number will also appear in << 8 position of 1st dword of uCode file */ | 
|  | #define IWL4965_UCODE_API "-1" | 
|  |  | 
|  | MODULE_DESCRIPTION(DRV_DESCRIPTION); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  | MODULE_AUTHOR(DRV_COPYRIGHT); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr) | 
|  | { | 
|  | u16 fc = le16_to_cpu(hdr->frame_control); | 
|  | int hdr_len = ieee80211_get_hdrlen(fc); | 
|  |  | 
|  | if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) | 
|  | return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_hw_mode *iwl_get_hw_mode( | 
|  | struct iwl_priv *priv, int mode) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 3; i++) | 
|  | if (priv->modes[i].mode == mode) | 
|  | return &priv->modes[i]; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int iwl_is_empty_essid(const char *essid, int essid_len) | 
|  | { | 
|  | /* Single white space is for Linksys APs */ | 
|  | if (essid_len == 1 && essid[0] == ' ') | 
|  | return 1; | 
|  |  | 
|  | /* Otherwise, if the entire essid is 0, we assume it is hidden */ | 
|  | while (essid_len) { | 
|  | essid_len--; | 
|  | if (essid[essid_len] != '\0') | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static const char *iwl_escape_essid(const char *essid, u8 essid_len) | 
|  | { | 
|  | static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; | 
|  | const char *s = essid; | 
|  | char *d = escaped; | 
|  |  | 
|  | if (iwl_is_empty_essid(essid, essid_len)) { | 
|  | memcpy(escaped, "<hidden>", sizeof("<hidden>")); | 
|  | return escaped; | 
|  | } | 
|  |  | 
|  | essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE); | 
|  | while (essid_len--) { | 
|  | if (*s == '\0') { | 
|  | *d++ = '\\'; | 
|  | *d++ = '0'; | 
|  | s++; | 
|  | } else | 
|  | *d++ = *s++; | 
|  | } | 
|  | *d = '\0'; | 
|  | return escaped; | 
|  | } | 
|  |  | 
|  | static void iwl_print_hex_dump(int level, void *p, u32 len) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (!(iwl_debug_level & level)) | 
|  | return; | 
|  |  | 
|  | print_hex_dump(KERN_DEBUG, "iwl data: ", DUMP_PREFIX_OFFSET, 16, 1, | 
|  | p, len, 1); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /*************** DMA-QUEUE-GENERAL-FUNCTIONS  ***** | 
|  | * DMA services | 
|  | * | 
|  | * Theory of operation | 
|  | * | 
|  | * A queue is a circular buffers with 'Read' and 'Write' pointers. | 
|  | * 2 empty entries always kept in the buffer to protect from overflow. | 
|  | * | 
|  | * For Tx queue, there are low mark and high mark limits. If, after queuing | 
|  | * the packet for Tx, free space become < low mark, Tx queue stopped. When | 
|  | * reclaiming packets (on 'tx done IRQ), if free space become > high mark, | 
|  | * Tx queue resumed. | 
|  | * | 
|  | * The IWL operates with six queues, one receive queue in the device's | 
|  | * sram, one transmit queue for sending commands to the device firmware, | 
|  | * and four transmit queues for data. | 
|  | ***************************************************/ | 
|  |  | 
|  | static int iwl_queue_space(const struct iwl_queue *q) | 
|  | { | 
|  | int s = q->last_used - q->first_empty; | 
|  |  | 
|  | if (q->last_used > q->first_empty) | 
|  | s -= q->n_bd; | 
|  |  | 
|  | if (s <= 0) | 
|  | s += q->n_window; | 
|  | /* keep some reserve to not confuse empty and full situations */ | 
|  | s -= 2; | 
|  | if (s < 0) | 
|  | s = 0; | 
|  | return s; | 
|  | } | 
|  |  | 
|  | /* XXX: n_bd must be power-of-two size */ | 
|  | static inline int iwl_queue_inc_wrap(int index, int n_bd) | 
|  | { | 
|  | return ++index & (n_bd - 1); | 
|  | } | 
|  |  | 
|  | /* XXX: n_bd must be power-of-two size */ | 
|  | static inline int iwl_queue_dec_wrap(int index, int n_bd) | 
|  | { | 
|  | return --index & (n_bd - 1); | 
|  | } | 
|  |  | 
|  | static inline int x2_queue_used(const struct iwl_queue *q, int i) | 
|  | { | 
|  | return q->first_empty > q->last_used ? | 
|  | (i >= q->last_used && i < q->first_empty) : | 
|  | !(i < q->last_used && i >= q->first_empty); | 
|  | } | 
|  |  | 
|  | static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge) | 
|  | { | 
|  | if (is_huge) | 
|  | return q->n_window; | 
|  |  | 
|  | return index & (q->n_window - 1); | 
|  | } | 
|  |  | 
|  | static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q, | 
|  | int count, int slots_num, u32 id) | 
|  | { | 
|  | q->n_bd = count; | 
|  | q->n_window = slots_num; | 
|  | q->id = id; | 
|  |  | 
|  | /* count must be power-of-two size, otherwise iwl_queue_inc_wrap | 
|  | * and iwl_queue_dec_wrap are broken. */ | 
|  | BUG_ON(!is_power_of_2(count)); | 
|  |  | 
|  | /* slots_num must be power-of-two size, otherwise | 
|  | * get_cmd_index is broken. */ | 
|  | BUG_ON(!is_power_of_2(slots_num)); | 
|  |  | 
|  | q->low_mark = q->n_window / 4; | 
|  | if (q->low_mark < 4) | 
|  | q->low_mark = 4; | 
|  |  | 
|  | q->high_mark = q->n_window / 8; | 
|  | if (q->high_mark < 2) | 
|  | q->high_mark = 2; | 
|  |  | 
|  | q->first_empty = q->last_used = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_tx_queue_alloc(struct iwl_priv *priv, | 
|  | struct iwl_tx_queue *txq, u32 id) | 
|  | { | 
|  | struct pci_dev *dev = priv->pci_dev; | 
|  |  | 
|  | if (id != IWL_CMD_QUEUE_NUM) { | 
|  | txq->txb = kmalloc(sizeof(txq->txb[0]) * | 
|  | TFD_QUEUE_SIZE_MAX, GFP_KERNEL); | 
|  | if (!txq->txb) { | 
|  | IWL_ERROR("kmalloc for auxilary BD " | 
|  | "structures failed\n"); | 
|  | goto error; | 
|  | } | 
|  | } else | 
|  | txq->txb = NULL; | 
|  |  | 
|  | txq->bd = pci_alloc_consistent(dev, | 
|  | sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX, | 
|  | &txq->q.dma_addr); | 
|  |  | 
|  | if (!txq->bd) { | 
|  | IWL_ERROR("pci_alloc_consistent(%zd) failed\n", | 
|  | sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX); | 
|  | goto error; | 
|  | } | 
|  | txq->q.id = id; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | if (txq->txb) { | 
|  | kfree(txq->txb); | 
|  | txq->txb = NULL; | 
|  | } | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | int iwl_tx_queue_init(struct iwl_priv *priv, | 
|  | struct iwl_tx_queue *txq, int slots_num, u32 txq_id) | 
|  | { | 
|  | struct pci_dev *dev = priv->pci_dev; | 
|  | int len; | 
|  | int rc = 0; | 
|  |  | 
|  | /* alocate command space + one big command for scan since scan | 
|  | * command is very huge the system will not have two scan at the | 
|  | * same time */ | 
|  | len = sizeof(struct iwl_cmd) * slots_num; | 
|  | if (txq_id == IWL_CMD_QUEUE_NUM) | 
|  | len +=  IWL_MAX_SCAN_SIZE; | 
|  | txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd); | 
|  | if (!txq->cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rc = iwl_tx_queue_alloc(priv, txq, txq_id); | 
|  | if (rc) { | 
|  | pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  | txq->need_update = 0; | 
|  |  | 
|  | /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise | 
|  | * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */ | 
|  | BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); | 
|  | iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id); | 
|  |  | 
|  | iwl_hw_tx_queue_init(priv, txq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_tx_queue_free - Deallocate DMA queue. | 
|  | * @txq: Transmit queue to deallocate. | 
|  | * | 
|  | * Empty queue by removing and destroying all BD's. | 
|  | * Free all buffers.  txq itself is not freed. | 
|  | * | 
|  | */ | 
|  | void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq) | 
|  | { | 
|  | struct iwl_queue *q = &txq->q; | 
|  | struct pci_dev *dev = priv->pci_dev; | 
|  | int len; | 
|  |  | 
|  | if (q->n_bd == 0) | 
|  | return; | 
|  |  | 
|  | /* first, empty all BD's */ | 
|  | for (; q->first_empty != q->last_used; | 
|  | q->last_used = iwl_queue_inc_wrap(q->last_used, q->n_bd)) | 
|  | iwl_hw_txq_free_tfd(priv, txq); | 
|  |  | 
|  | len = sizeof(struct iwl_cmd) * q->n_window; | 
|  | if (q->id == IWL_CMD_QUEUE_NUM) | 
|  | len += IWL_MAX_SCAN_SIZE; | 
|  |  | 
|  | pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); | 
|  |  | 
|  | /* free buffers belonging to queue itself */ | 
|  | if (txq->q.n_bd) | 
|  | pci_free_consistent(dev, sizeof(struct iwl_tfd_frame) * | 
|  | txq->q.n_bd, txq->bd, txq->q.dma_addr); | 
|  |  | 
|  | if (txq->txb) { | 
|  | kfree(txq->txb); | 
|  | txq->txb = NULL; | 
|  | } | 
|  |  | 
|  | /* 0 fill whole structure */ | 
|  | memset(txq, 0, sizeof(*txq)); | 
|  | } | 
|  |  | 
|  | const u8 BROADCAST_ADDR[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | 
|  |  | 
|  | /*************** STATION TABLE MANAGEMENT **** | 
|  | * | 
|  | * NOTE:  This needs to be overhauled to better synchronize between | 
|  | * how the iwl-4965.c is using iwl_hw_find_station vs. iwl-3945.c | 
|  | * | 
|  | * mac80211 should also be examined to determine if sta_info is duplicating | 
|  | * the functionality provided here | 
|  | */ | 
|  |  | 
|  | /**************************************************************/ | 
|  |  | 
|  | #if 0 /* temparary disable till we add real remove station */ | 
|  | static u8 iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap) | 
|  | { | 
|  | int index = IWL_INVALID_STATION; | 
|  | int i; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  |  | 
|  | if (is_ap) | 
|  | index = IWL_AP_ID; | 
|  | else if (is_broadcast_ether_addr(addr)) | 
|  | index = priv->hw_setting.bcast_sta_id; | 
|  | else | 
|  | for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) | 
|  | if (priv->stations[i].used && | 
|  | !compare_ether_addr(priv->stations[i].sta.sta.addr, | 
|  | addr)) { | 
|  | index = i; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(index == IWL_INVALID_STATION)) | 
|  | goto out; | 
|  |  | 
|  | if (priv->stations[index].used) { | 
|  | priv->stations[index].used = 0; | 
|  | priv->num_stations--; | 
|  | } | 
|  |  | 
|  | BUG_ON(priv->num_stations < 0); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwl_clear_stations_table(struct iwl_priv *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  |  | 
|  | priv->num_stations = 0; | 
|  | memset(priv->stations, 0, sizeof(priv->stations)); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  | } | 
|  |  | 
|  | u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap, u8 flags) | 
|  | { | 
|  | int i; | 
|  | int index = IWL_INVALID_STATION; | 
|  | struct iwl_station_entry *station; | 
|  | unsigned long flags_spin; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags_spin); | 
|  | if (is_ap) | 
|  | index = IWL_AP_ID; | 
|  | else if (is_broadcast_ether_addr(addr)) | 
|  | index = priv->hw_setting.bcast_sta_id; | 
|  | else | 
|  | for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) { | 
|  | if (!compare_ether_addr(priv->stations[i].sta.sta.addr, | 
|  | addr)) { | 
|  | index = i; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!priv->stations[i].used && | 
|  | index == IWL_INVALID_STATION) | 
|  | index = i; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* These twh conditions has the same outcome but keep them separate | 
|  | since they have different meaning */ | 
|  | if (unlikely(index == IWL_INVALID_STATION)) { | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags_spin); | 
|  | return index; | 
|  | } | 
|  |  | 
|  | if (priv->stations[index].used && | 
|  | !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) { | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags_spin); | 
|  | return index; | 
|  | } | 
|  |  | 
|  |  | 
|  | IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr)); | 
|  | station = &priv->stations[index]; | 
|  | station->used = 1; | 
|  | priv->num_stations++; | 
|  |  | 
|  | memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd)); | 
|  | memcpy(station->sta.sta.addr, addr, ETH_ALEN); | 
|  | station->sta.mode = 0; | 
|  | station->sta.sta.sta_id = index; | 
|  | station->sta.station_flags = 0; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | /* BCAST station and IBSS stations do not work in HT mode */ | 
|  | if (index != priv->hw_setting.bcast_sta_id && | 
|  | priv->iw_mode != IEEE80211_IF_TYPE_IBSS) | 
|  | iwl4965_set_ht_add_station(priv, index); | 
|  | #endif /*CONFIG_IWLWIFI_HT*/ | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags_spin); | 
|  | iwl_send_add_station(priv, &station->sta, flags); | 
|  | return index; | 
|  |  | 
|  | } | 
|  |  | 
|  | /*************** DRIVER STATUS FUNCTIONS   *****/ | 
|  |  | 
|  | static inline int iwl_is_ready(struct iwl_priv *priv) | 
|  | { | 
|  | /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are | 
|  | * set but EXIT_PENDING is not */ | 
|  | return test_bit(STATUS_READY, &priv->status) && | 
|  | test_bit(STATUS_GEO_CONFIGURED, &priv->status) && | 
|  | !test_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  | } | 
|  |  | 
|  | static inline int iwl_is_alive(struct iwl_priv *priv) | 
|  | { | 
|  | return test_bit(STATUS_ALIVE, &priv->status); | 
|  | } | 
|  |  | 
|  | static inline int iwl_is_init(struct iwl_priv *priv) | 
|  | { | 
|  | return test_bit(STATUS_INIT, &priv->status); | 
|  | } | 
|  |  | 
|  | static inline int iwl_is_rfkill(struct iwl_priv *priv) | 
|  | { | 
|  | return test_bit(STATUS_RF_KILL_HW, &priv->status) || | 
|  | test_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  | } | 
|  |  | 
|  | static inline int iwl_is_ready_rf(struct iwl_priv *priv) | 
|  | { | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) | 
|  | return 0; | 
|  |  | 
|  | return iwl_is_ready(priv); | 
|  | } | 
|  |  | 
|  | /*************** HOST COMMAND QUEUE FUNCTIONS   *****/ | 
|  |  | 
|  | #define IWL_CMD(x) case x : return #x | 
|  |  | 
|  | static const char *get_cmd_string(u8 cmd) | 
|  | { | 
|  | switch (cmd) { | 
|  | IWL_CMD(REPLY_ALIVE); | 
|  | IWL_CMD(REPLY_ERROR); | 
|  | IWL_CMD(REPLY_RXON); | 
|  | IWL_CMD(REPLY_RXON_ASSOC); | 
|  | IWL_CMD(REPLY_QOS_PARAM); | 
|  | IWL_CMD(REPLY_RXON_TIMING); | 
|  | IWL_CMD(REPLY_ADD_STA); | 
|  | IWL_CMD(REPLY_REMOVE_STA); | 
|  | IWL_CMD(REPLY_REMOVE_ALL_STA); | 
|  | IWL_CMD(REPLY_TX); | 
|  | IWL_CMD(REPLY_RATE_SCALE); | 
|  | IWL_CMD(REPLY_LEDS_CMD); | 
|  | IWL_CMD(REPLY_TX_LINK_QUALITY_CMD); | 
|  | IWL_CMD(RADAR_NOTIFICATION); | 
|  | IWL_CMD(REPLY_QUIET_CMD); | 
|  | IWL_CMD(REPLY_CHANNEL_SWITCH); | 
|  | IWL_CMD(CHANNEL_SWITCH_NOTIFICATION); | 
|  | IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD); | 
|  | IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION); | 
|  | IWL_CMD(POWER_TABLE_CMD); | 
|  | IWL_CMD(PM_SLEEP_NOTIFICATION); | 
|  | IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC); | 
|  | IWL_CMD(REPLY_SCAN_CMD); | 
|  | IWL_CMD(REPLY_SCAN_ABORT_CMD); | 
|  | IWL_CMD(SCAN_START_NOTIFICATION); | 
|  | IWL_CMD(SCAN_RESULTS_NOTIFICATION); | 
|  | IWL_CMD(SCAN_COMPLETE_NOTIFICATION); | 
|  | IWL_CMD(BEACON_NOTIFICATION); | 
|  | IWL_CMD(REPLY_TX_BEACON); | 
|  | IWL_CMD(WHO_IS_AWAKE_NOTIFICATION); | 
|  | IWL_CMD(QUIET_NOTIFICATION); | 
|  | IWL_CMD(REPLY_TX_PWR_TABLE_CMD); | 
|  | IWL_CMD(MEASURE_ABORT_NOTIFICATION); | 
|  | IWL_CMD(REPLY_BT_CONFIG); | 
|  | IWL_CMD(REPLY_STATISTICS_CMD); | 
|  | IWL_CMD(STATISTICS_NOTIFICATION); | 
|  | IWL_CMD(REPLY_CARD_STATE_CMD); | 
|  | IWL_CMD(CARD_STATE_NOTIFICATION); | 
|  | IWL_CMD(MISSED_BEACONS_NOTIFICATION); | 
|  | IWL_CMD(REPLY_CT_KILL_CONFIG_CMD); | 
|  | IWL_CMD(SENSITIVITY_CMD); | 
|  | IWL_CMD(REPLY_PHY_CALIBRATION_CMD); | 
|  | IWL_CMD(REPLY_RX_PHY_CMD); | 
|  | IWL_CMD(REPLY_RX_MPDU_CMD); | 
|  | IWL_CMD(REPLY_4965_RX); | 
|  | IWL_CMD(REPLY_COMPRESSED_BA); | 
|  | default: | 
|  | return "UNKNOWN"; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | #define HOST_COMPLETE_TIMEOUT (HZ / 2) | 
|  |  | 
|  | /** | 
|  | * iwl_enqueue_hcmd - enqueue a uCode command | 
|  | * @priv: device private data point | 
|  | * @cmd: a point to the ucode command structure | 
|  | * | 
|  | * The function returns < 0 values to indicate the operation is | 
|  | * failed. On success, it turns the index (> 0) of command in the | 
|  | * command queue. | 
|  | */ | 
|  | static int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) | 
|  | { | 
|  | struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; | 
|  | struct iwl_queue *q = &txq->q; | 
|  | struct iwl_tfd_frame *tfd; | 
|  | u32 *control_flags; | 
|  | struct iwl_cmd *out_cmd; | 
|  | u32 idx; | 
|  | u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr)); | 
|  | dma_addr_t phys_addr; | 
|  | int ret; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* If any of the command structures end up being larger than | 
|  | * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then | 
|  | * we will need to increase the size of the TFD entries */ | 
|  | BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) && | 
|  | !(cmd->meta.flags & CMD_SIZE_HUGE)); | 
|  |  | 
|  | if (iwl_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) { | 
|  | IWL_ERROR("No space for Tx\n"); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->hcmd_lock, flags); | 
|  |  | 
|  | tfd = &txq->bd[q->first_empty]; | 
|  | memset(tfd, 0, sizeof(*tfd)); | 
|  |  | 
|  | control_flags = (u32 *) tfd; | 
|  |  | 
|  | idx = get_cmd_index(q, q->first_empty, cmd->meta.flags & CMD_SIZE_HUGE); | 
|  | out_cmd = &txq->cmd[idx]; | 
|  |  | 
|  | out_cmd->hdr.cmd = cmd->id; | 
|  | memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta)); | 
|  | memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len); | 
|  |  | 
|  | /* At this point, the out_cmd now has all of the incoming cmd | 
|  | * information */ | 
|  |  | 
|  | out_cmd->hdr.flags = 0; | 
|  | out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | | 
|  | INDEX_TO_SEQ(q->first_empty)); | 
|  | if (out_cmd->meta.flags & CMD_SIZE_HUGE) | 
|  | out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); | 
|  |  | 
|  | phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx + | 
|  | offsetof(struct iwl_cmd, hdr); | 
|  | iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); | 
|  |  | 
|  | IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " | 
|  | "%d bytes at %d[%d]:%d\n", | 
|  | get_cmd_string(out_cmd->hdr.cmd), | 
|  | out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), | 
|  | fix_size, q->first_empty, idx, IWL_CMD_QUEUE_NUM); | 
|  |  | 
|  | txq->need_update = 1; | 
|  | ret = iwl4965_tx_queue_update_wr_ptr(priv, txq, 0); | 
|  | q->first_empty = iwl_queue_inc_wrap(q->first_empty, q->n_bd); | 
|  | iwl_tx_queue_update_write_ptr(priv, txq); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->hcmd_lock, flags); | 
|  | return ret ? ret : idx; | 
|  | } | 
|  |  | 
|  | int iwl_send_cmd_async(struct iwl_priv *priv, struct iwl_host_cmd *cmd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | BUG_ON(!(cmd->meta.flags & CMD_ASYNC)); | 
|  |  | 
|  | /* An asynchronous command can not expect an SKB to be set. */ | 
|  | BUG_ON(cmd->meta.flags & CMD_WANT_SKB); | 
|  |  | 
|  | /* An asynchronous command MUST have a callback. */ | 
|  | BUG_ON(!cmd->meta.u.callback); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return -EBUSY; | 
|  |  | 
|  | ret = iwl_enqueue_hcmd(priv, cmd); | 
|  | if (ret < 0) { | 
|  | IWL_ERROR("Error sending %s: iwl_enqueue_hcmd failed: %d\n", | 
|  | get_cmd_string(cmd->id), ret); | 
|  | return ret; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) | 
|  | { | 
|  | int cmd_idx; | 
|  | int ret; | 
|  | static atomic_t entry = ATOMIC_INIT(0); /* reentrance protection */ | 
|  |  | 
|  | BUG_ON(cmd->meta.flags & CMD_ASYNC); | 
|  |  | 
|  | /* A synchronous command can not have a callback set. */ | 
|  | BUG_ON(cmd->meta.u.callback != NULL); | 
|  |  | 
|  | if (atomic_xchg(&entry, 1)) { | 
|  | IWL_ERROR("Error sending %s: Already sending a host command\n", | 
|  | get_cmd_string(cmd->id)); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | set_bit(STATUS_HCMD_ACTIVE, &priv->status); | 
|  |  | 
|  | if (cmd->meta.flags & CMD_WANT_SKB) | 
|  | cmd->meta.source = &cmd->meta; | 
|  |  | 
|  | cmd_idx = iwl_enqueue_hcmd(priv, cmd); | 
|  | if (cmd_idx < 0) { | 
|  | ret = cmd_idx; | 
|  | IWL_ERROR("Error sending %s: iwl_enqueue_hcmd failed: %d\n", | 
|  | get_cmd_string(cmd->id), ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = wait_event_interruptible_timeout(priv->wait_command_queue, | 
|  | !test_bit(STATUS_HCMD_ACTIVE, &priv->status), | 
|  | HOST_COMPLETE_TIMEOUT); | 
|  | if (!ret) { | 
|  | if (test_bit(STATUS_HCMD_ACTIVE, &priv->status)) { | 
|  | IWL_ERROR("Error sending %s: time out after %dms.\n", | 
|  | get_cmd_string(cmd->id), | 
|  | jiffies_to_msecs(HOST_COMPLETE_TIMEOUT)); | 
|  |  | 
|  | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | 
|  | ret = -ETIMEDOUT; | 
|  | goto cancel; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { | 
|  | IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n", | 
|  | get_cmd_string(cmd->id)); | 
|  | ret = -ECANCELED; | 
|  | goto fail; | 
|  | } | 
|  | if (test_bit(STATUS_FW_ERROR, &priv->status)) { | 
|  | IWL_DEBUG_INFO("Command %s failed: FW Error\n", | 
|  | get_cmd_string(cmd->id)); | 
|  | ret = -EIO; | 
|  | goto fail; | 
|  | } | 
|  | if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) { | 
|  | IWL_ERROR("Error: Response NULL in '%s'\n", | 
|  | get_cmd_string(cmd->id)); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | goto out; | 
|  |  | 
|  | cancel: | 
|  | if (cmd->meta.flags & CMD_WANT_SKB) { | 
|  | struct iwl_cmd *qcmd; | 
|  |  | 
|  | /* Cancel the CMD_WANT_SKB flag for the cmd in the | 
|  | * TX cmd queue. Otherwise in case the cmd comes | 
|  | * in later, it will possibly set an invalid | 
|  | * address (cmd->meta.source). */ | 
|  | qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; | 
|  | qcmd->meta.flags &= ~CMD_WANT_SKB; | 
|  | } | 
|  | fail: | 
|  | if (cmd->meta.u.skb) { | 
|  | dev_kfree_skb_any(cmd->meta.u.skb); | 
|  | cmd->meta.u.skb = NULL; | 
|  | } | 
|  | out: | 
|  | atomic_set(&entry, 0); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) | 
|  | { | 
|  | /* A command can not be asynchronous AND expect an SKB to be set. */ | 
|  | BUG_ON((cmd->meta.flags & CMD_ASYNC) && | 
|  | (cmd->meta.flags & CMD_WANT_SKB)); | 
|  |  | 
|  | if (cmd->meta.flags & CMD_ASYNC) | 
|  | return iwl_send_cmd_async(priv, cmd); | 
|  |  | 
|  | return iwl_send_cmd_sync(priv, cmd); | 
|  | } | 
|  |  | 
|  | int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data) | 
|  | { | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = id, | 
|  | .len = len, | 
|  | .data = data, | 
|  | }; | 
|  |  | 
|  | return iwl_send_cmd_sync(priv, &cmd); | 
|  | } | 
|  |  | 
|  | static int __must_check iwl_send_cmd_u32(struct iwl_priv *priv, u8 id, u32 val) | 
|  | { | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = id, | 
|  | .len = sizeof(val), | 
|  | .data = &val, | 
|  | }; | 
|  |  | 
|  | return iwl_send_cmd_sync(priv, &cmd); | 
|  | } | 
|  |  | 
|  | int iwl_send_statistics_request(struct iwl_priv *priv) | 
|  | { | 
|  | return iwl_send_cmd_u32(priv, REPLY_STATISTICS_CMD, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_rxon_add_station - add station into station table. | 
|  | * | 
|  | * there is only one AP station with id= IWL_AP_ID | 
|  | * NOTE: mutex must be held before calling the this fnction | 
|  | */ | 
|  | static int iwl_rxon_add_station(struct iwl_priv *priv, | 
|  | const u8 *addr, int is_ap) | 
|  | { | 
|  | u8 sta_id; | 
|  |  | 
|  | sta_id = iwl_add_station(priv, addr, is_ap, 0); | 
|  | iwl4965_add_station(priv, addr, is_ap); | 
|  |  | 
|  | return sta_id; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON | 
|  | * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz | 
|  | * @channel: Any channel valid for the requested phymode | 
|  |  | 
|  | * In addition to setting the staging RXON, priv->phymode is also set. | 
|  | * | 
|  | * NOTE:  Does not commit to the hardware; it sets appropriate bit fields | 
|  | * in the staging RXON flag structure based on the phymode | 
|  | */ | 
|  | static int iwl_set_rxon_channel(struct iwl_priv *priv, u8 phymode, u16 channel) | 
|  | { | 
|  | if (!iwl_get_channel_info(priv, phymode, channel)) { | 
|  | IWL_DEBUG_INFO("Could not set channel to %d [%d]\n", | 
|  | channel, phymode); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if ((le16_to_cpu(priv->staging_rxon.channel) == channel) && | 
|  | (priv->phymode == phymode)) | 
|  | return 0; | 
|  |  | 
|  | priv->staging_rxon.channel = cpu_to_le16(channel); | 
|  | if (phymode == MODE_IEEE80211A) | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; | 
|  |  | 
|  | priv->phymode = phymode; | 
|  |  | 
|  | IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, phymode); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_check_rxon_cmd - validate RXON structure is valid | 
|  | * | 
|  | * NOTE:  This is really only useful during development and can eventually | 
|  | * be #ifdef'd out once the driver is stable and folks aren't actively | 
|  | * making changes | 
|  | */ | 
|  | static int iwl_check_rxon_cmd(struct iwl_rxon_cmd *rxon) | 
|  | { | 
|  | int error = 0; | 
|  | int counter = 1; | 
|  |  | 
|  | if (rxon->flags & RXON_FLG_BAND_24G_MSK) { | 
|  | error |= le32_to_cpu(rxon->flags & | 
|  | (RXON_FLG_TGJ_NARROW_BAND_MSK | | 
|  | RXON_FLG_RADAR_DETECT_MSK)); | 
|  | if (error) | 
|  | IWL_WARNING("check 24G fields %d | %d\n", | 
|  | counter++, error); | 
|  | } else { | 
|  | error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? | 
|  | 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); | 
|  | if (error) | 
|  | IWL_WARNING("check 52 fields %d | %d\n", | 
|  | counter++, error); | 
|  | error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); | 
|  | if (error) | 
|  | IWL_WARNING("check 52 CCK %d | %d\n", | 
|  | counter++, error); | 
|  | } | 
|  | error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; | 
|  | if (error) | 
|  | IWL_WARNING("check mac addr %d | %d\n", counter++, error); | 
|  |  | 
|  | /* make sure basic rates 6Mbps and 1Mbps are supported */ | 
|  | error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && | 
|  | ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); | 
|  | if (error) | 
|  | IWL_WARNING("check basic rate %d | %d\n", counter++, error); | 
|  |  | 
|  | error |= (le16_to_cpu(rxon->assoc_id) > 2007); | 
|  | if (error) | 
|  | IWL_WARNING("check assoc id %d | %d\n", counter++, error); | 
|  |  | 
|  | error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) | 
|  | == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); | 
|  | if (error) | 
|  | IWL_WARNING("check CCK and short slot %d | %d\n", | 
|  | counter++, error); | 
|  |  | 
|  | error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) | 
|  | == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); | 
|  | if (error) | 
|  | IWL_WARNING("check CCK & auto detect %d | %d\n", | 
|  | counter++, error); | 
|  |  | 
|  | error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | | 
|  | RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); | 
|  | if (error) | 
|  | IWL_WARNING("check TGG and auto detect %d | %d\n", | 
|  | counter++, error); | 
|  |  | 
|  | if (error) | 
|  | IWL_WARNING("Tuning to channel %d\n", | 
|  | le16_to_cpu(rxon->channel)); | 
|  |  | 
|  | if (error) { | 
|  | IWL_ERROR("Not a valid iwl_rxon_assoc_cmd field values\n"); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit | 
|  | * @priv: staging_rxon is comapred to active_rxon | 
|  | * | 
|  | * If the RXON structure is changing sufficient to require a new | 
|  | * tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1 | 
|  | * to indicate a new tune is required. | 
|  | */ | 
|  | static int iwl_full_rxon_required(struct iwl_priv *priv) | 
|  | { | 
|  |  | 
|  | /* These items are only settable from the full RXON command */ | 
|  | if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) || | 
|  | compare_ether_addr(priv->staging_rxon.bssid_addr, | 
|  | priv->active_rxon.bssid_addr) || | 
|  | compare_ether_addr(priv->staging_rxon.node_addr, | 
|  | priv->active_rxon.node_addr) || | 
|  | compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, | 
|  | priv->active_rxon.wlap_bssid_addr) || | 
|  | (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || | 
|  | (priv->staging_rxon.channel != priv->active_rxon.channel) || | 
|  | (priv->staging_rxon.air_propagation != | 
|  | priv->active_rxon.air_propagation) || | 
|  | (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != | 
|  | priv->active_rxon.ofdm_ht_single_stream_basic_rates) || | 
|  | (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != | 
|  | priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || | 
|  | (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || | 
|  | (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) | 
|  | return 1; | 
|  |  | 
|  | /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can | 
|  | * be updated with the RXON_ASSOC command -- however only some | 
|  | * flag transitions are allowed using RXON_ASSOC */ | 
|  |  | 
|  | /* Check if we are not switching bands */ | 
|  | if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != | 
|  | (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) | 
|  | return 1; | 
|  |  | 
|  | /* Check if we are switching association toggle */ | 
|  | if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != | 
|  | (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_send_rxon_assoc(struct iwl_priv *priv) | 
|  | { | 
|  | int rc = 0; | 
|  | struct iwl_rx_packet *res = NULL; | 
|  | struct iwl_rxon_assoc_cmd rxon_assoc; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_RXON_ASSOC, | 
|  | .len = sizeof(rxon_assoc), | 
|  | .meta.flags = CMD_WANT_SKB, | 
|  | .data = &rxon_assoc, | 
|  | }; | 
|  | const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon; | 
|  | const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon; | 
|  |  | 
|  | if ((rxon1->flags == rxon2->flags) && | 
|  | (rxon1->filter_flags == rxon2->filter_flags) && | 
|  | (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && | 
|  | (rxon1->ofdm_ht_single_stream_basic_rates == | 
|  | rxon2->ofdm_ht_single_stream_basic_rates) && | 
|  | (rxon1->ofdm_ht_dual_stream_basic_rates == | 
|  | rxon2->ofdm_ht_dual_stream_basic_rates) && | 
|  | (rxon1->rx_chain == rxon2->rx_chain) && | 
|  | (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { | 
|  | IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rxon_assoc.flags = priv->staging_rxon.flags; | 
|  | rxon_assoc.filter_flags = priv->staging_rxon.filter_flags; | 
|  | rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates; | 
|  | rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates; | 
|  | rxon_assoc.reserved = 0; | 
|  | rxon_assoc.ofdm_ht_single_stream_basic_rates = | 
|  | priv->staging_rxon.ofdm_ht_single_stream_basic_rates; | 
|  | rxon_assoc.ofdm_ht_dual_stream_basic_rates = | 
|  | priv->staging_rxon.ofdm_ht_dual_stream_basic_rates; | 
|  | rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain; | 
|  |  | 
|  | rc = iwl_send_cmd_sync(priv, &cmd); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; | 
|  | if (res->hdr.flags & IWL_CMD_FAILED_MSK) { | 
|  | IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n"); | 
|  | rc = -EIO; | 
|  | } | 
|  |  | 
|  | priv->alloc_rxb_skb--; | 
|  | dev_kfree_skb_any(cmd.meta.u.skb); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_commit_rxon - commit staging_rxon to hardware | 
|  | * | 
|  | * The RXON command in staging_rxon is commited to the hardware and | 
|  | * the active_rxon structure is updated with the new data.  This | 
|  | * function correctly transitions out of the RXON_ASSOC_MSK state if | 
|  | * a HW tune is required based on the RXON structure changes. | 
|  | */ | 
|  | static int iwl_commit_rxon(struct iwl_priv *priv) | 
|  | { | 
|  | /* cast away the const for active_rxon in this function */ | 
|  | struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | int rc = 0; | 
|  |  | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -1; | 
|  |  | 
|  | /* always get timestamp with Rx frame */ | 
|  | priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; | 
|  |  | 
|  | rc = iwl_check_rxon_cmd(&priv->staging_rxon); | 
|  | if (rc) { | 
|  | IWL_ERROR("Invalid RXON configuration.  Not committing.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* If we don't need to send a full RXON, we can use | 
|  | * iwl_rxon_assoc_cmd which is used to reconfigure filter | 
|  | * and other flags for the current radio configuration. */ | 
|  | if (!iwl_full_rxon_required(priv)) { | 
|  | rc = iwl_send_rxon_assoc(priv); | 
|  | if (rc) { | 
|  | IWL_ERROR("Error setting RXON_ASSOC " | 
|  | "configuration (%d).\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* station table will be cleared */ | 
|  | priv->assoc_station_added = 0; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SENSITIVITY | 
|  | priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; | 
|  | if (!priv->error_recovering) | 
|  | priv->start_calib = 0; | 
|  |  | 
|  | iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); | 
|  | #endif /* CONFIG_IWLWIFI_SENSITIVITY */ | 
|  |  | 
|  | /* If we are currently associated and the new config requires | 
|  | * an RXON_ASSOC and the new config wants the associated mask enabled, | 
|  | * we must clear the associated from the active configuration | 
|  | * before we apply the new config */ | 
|  | if (iwl_is_associated(priv) && | 
|  | (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) { | 
|  | IWL_DEBUG_INFO("Toggling associated bit on current RXON\n"); | 
|  | active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  |  | 
|  | rc = iwl_send_cmd_pdu(priv, REPLY_RXON, | 
|  | sizeof(struct iwl_rxon_cmd), | 
|  | &priv->active_rxon); | 
|  |  | 
|  | /* If the mask clearing failed then we set | 
|  | * active_rxon back to what it was previously */ | 
|  | if (rc) { | 
|  | active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | IWL_ERROR("Error clearing ASSOC_MSK on current " | 
|  | "configuration (%d).\n", rc); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("Sending RXON\n" | 
|  | "* with%s RXON_FILTER_ASSOC_MSK\n" | 
|  | "* channel = %d\n" | 
|  | "* bssid = %s\n", | 
|  | ((priv->staging_rxon.filter_flags & | 
|  | RXON_FILTER_ASSOC_MSK) ? "" : "out"), | 
|  | le16_to_cpu(priv->staging_rxon.channel), | 
|  | print_mac(mac, priv->staging_rxon.bssid_addr)); | 
|  |  | 
|  | /* Apply the new configuration */ | 
|  | rc = iwl_send_cmd_pdu(priv, REPLY_RXON, | 
|  | sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); | 
|  | if (rc) { | 
|  | IWL_ERROR("Error setting new configuration (%d).\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SENSITIVITY | 
|  | if (!priv->error_recovering) | 
|  | priv->start_calib = 0; | 
|  |  | 
|  | priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; | 
|  | iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); | 
|  | #endif /* CONFIG_IWLWIFI_SENSITIVITY */ | 
|  |  | 
|  | memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); | 
|  |  | 
|  | /* If we issue a new RXON command which required a tune then we must | 
|  | * send a new TXPOWER command or we won't be able to Tx any frames */ | 
|  | rc = iwl_hw_reg_send_txpower(priv); | 
|  | if (rc) { | 
|  | IWL_ERROR("Error setting Tx power (%d).\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Add the broadcast address so we can send broadcast frames */ | 
|  | if (iwl_rxon_add_station(priv, BROADCAST_ADDR, 0) == | 
|  | IWL_INVALID_STATION) { | 
|  | IWL_ERROR("Error adding BROADCAST address for transmit.\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* If we have set the ASSOC_MSK and we are in BSS mode then | 
|  | * add the IWL_AP_ID to the station rate table */ | 
|  | if (iwl_is_associated(priv) && | 
|  | (priv->iw_mode == IEEE80211_IF_TYPE_STA)) { | 
|  | if (iwl_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1) | 
|  | == IWL_INVALID_STATION) { | 
|  | IWL_ERROR("Error adding AP address for transmit.\n"); | 
|  | return -EIO; | 
|  | } | 
|  | priv->assoc_station_added = 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_send_bt_config(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_bt_cmd bt_cmd = { | 
|  | .flags = 3, | 
|  | .lead_time = 0xAA, | 
|  | .max_kill = 1, | 
|  | .kill_ack_mask = 0, | 
|  | .kill_cts_mask = 0, | 
|  | }; | 
|  |  | 
|  | return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, | 
|  | sizeof(struct iwl_bt_cmd), &bt_cmd); | 
|  | } | 
|  |  | 
|  | static int iwl_send_scan_abort(struct iwl_priv *priv) | 
|  | { | 
|  | int rc = 0; | 
|  | struct iwl_rx_packet *res; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_SCAN_ABORT_CMD, | 
|  | .meta.flags = CMD_WANT_SKB, | 
|  | }; | 
|  |  | 
|  | /* If there isn't a scan actively going on in the hardware | 
|  | * then we are in between scan bands and not actually | 
|  | * actively scanning, so don't send the abort command */ | 
|  | if (!test_bit(STATUS_SCAN_HW, &priv->status)) { | 
|  | clear_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rc = iwl_send_cmd_sync(priv, &cmd); | 
|  | if (rc) { | 
|  | clear_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; | 
|  | if (res->u.status != CAN_ABORT_STATUS) { | 
|  | /* The scan abort will return 1 for success or | 
|  | * 2 for "failure".  A failure condition can be | 
|  | * due to simply not being in an active scan which | 
|  | * can occur if we send the scan abort before we | 
|  | * the microcode has notified us that a scan is | 
|  | * completed. */ | 
|  | IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status); | 
|  | clear_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | clear_bit(STATUS_SCAN_HW, &priv->status); | 
|  | } | 
|  |  | 
|  | dev_kfree_skb_any(cmd.meta.u.skb); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_card_state_sync_callback(struct iwl_priv *priv, | 
|  | struct iwl_cmd *cmd, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * CARD_STATE_CMD | 
|  | * | 
|  | * Use: Sets the internal card state to enable, disable, or halt | 
|  | * | 
|  | * When in the 'enable' state the card operates as normal. | 
|  | * When in the 'disable' state, the card enters into a low power mode. | 
|  | * When in the 'halt' state, the card is shut down and must be fully | 
|  | * restarted to come back on. | 
|  | */ | 
|  | static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) | 
|  | { | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_CARD_STATE_CMD, | 
|  | .len = sizeof(u32), | 
|  | .data = &flags, | 
|  | .meta.flags = meta_flag, | 
|  | }; | 
|  |  | 
|  | if (meta_flag & CMD_ASYNC) | 
|  | cmd.meta.u.callback = iwl_card_state_sync_callback; | 
|  |  | 
|  | return iwl_send_cmd(priv, &cmd); | 
|  | } | 
|  |  | 
|  | static int iwl_add_sta_sync_callback(struct iwl_priv *priv, | 
|  | struct iwl_cmd *cmd, struct sk_buff *skb) | 
|  | { | 
|  | struct iwl_rx_packet *res = NULL; | 
|  |  | 
|  | if (!skb) { | 
|  | IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | res = (struct iwl_rx_packet *)skb->data; | 
|  | if (res->hdr.flags & IWL_CMD_FAILED_MSK) { | 
|  | IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", | 
|  | res->hdr.flags); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | switch (res->u.add_sta.status) { | 
|  | case ADD_STA_SUCCESS_MSK: | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* We didn't cache the SKB; let the caller free it */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int iwl_send_add_station(struct iwl_priv *priv, | 
|  | struct iwl_addsta_cmd *sta, u8 flags) | 
|  | { | 
|  | struct iwl_rx_packet *res = NULL; | 
|  | int rc = 0; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_ADD_STA, | 
|  | .len = sizeof(struct iwl_addsta_cmd), | 
|  | .meta.flags = flags, | 
|  | .data = sta, | 
|  | }; | 
|  |  | 
|  | if (flags & CMD_ASYNC) | 
|  | cmd.meta.u.callback = iwl_add_sta_sync_callback; | 
|  | else | 
|  | cmd.meta.flags |= CMD_WANT_SKB; | 
|  |  | 
|  | rc = iwl_send_cmd(priv, &cmd); | 
|  |  | 
|  | if (rc || (flags & CMD_ASYNC)) | 
|  | return rc; | 
|  |  | 
|  | res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; | 
|  | if (res->hdr.flags & IWL_CMD_FAILED_MSK) { | 
|  | IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", | 
|  | res->hdr.flags); | 
|  | rc = -EIO; | 
|  | } | 
|  |  | 
|  | if (rc == 0) { | 
|  | switch (res->u.add_sta.status) { | 
|  | case ADD_STA_SUCCESS_MSK: | 
|  | IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n"); | 
|  | break; | 
|  | default: | 
|  | rc = -EIO; | 
|  | IWL_WARNING("REPLY_ADD_STA failed\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->alloc_rxb_skb--; | 
|  | dev_kfree_skb_any(cmd.meta.u.skb); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_update_sta_key_info(struct iwl_priv *priv, | 
|  | struct ieee80211_key_conf *keyconf, | 
|  | u8 sta_id) | 
|  | { | 
|  | unsigned long flags; | 
|  | __le16 key_flags = 0; | 
|  |  | 
|  | switch (keyconf->alg) { | 
|  | case ALG_CCMP: | 
|  | key_flags |= STA_KEY_FLG_CCMP; | 
|  | key_flags |= cpu_to_le16( | 
|  | keyconf->keyidx << STA_KEY_FLG_KEYID_POS); | 
|  | key_flags &= ~STA_KEY_FLG_INVALID; | 
|  | break; | 
|  | case ALG_TKIP: | 
|  | case ALG_WEP: | 
|  | return -EINVAL; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  | priv->stations[sta_id].keyinfo.alg = keyconf->alg; | 
|  | priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; | 
|  | memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, | 
|  | keyconf->keylen); | 
|  |  | 
|  | memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, | 
|  | keyconf->keylen); | 
|  | priv->stations[sta_id].sta.key.key_flags = key_flags; | 
|  | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; | 
|  | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  |  | 
|  | IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); | 
|  | iwl_send_add_station(priv, &priv->stations[sta_id].sta, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  | memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); | 
|  | memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl_keyinfo)); | 
|  | priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; | 
|  | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; | 
|  | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  |  | 
|  | IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n"); | 
|  | iwl_send_add_station(priv, &priv->stations[sta_id].sta, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_clear_free_frames(struct iwl_priv *priv) | 
|  | { | 
|  | struct list_head *element; | 
|  |  | 
|  | IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n", | 
|  | priv->frames_count); | 
|  |  | 
|  | while (!list_empty(&priv->free_frames)) { | 
|  | element = priv->free_frames.next; | 
|  | list_del(element); | 
|  | kfree(list_entry(element, struct iwl_frame, list)); | 
|  | priv->frames_count--; | 
|  | } | 
|  |  | 
|  | if (priv->frames_count) { | 
|  | IWL_WARNING("%d frames still in use.  Did we lose one?\n", | 
|  | priv->frames_count); | 
|  | priv->frames_count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_frame *frame; | 
|  | struct list_head *element; | 
|  | if (list_empty(&priv->free_frames)) { | 
|  | frame = kzalloc(sizeof(*frame), GFP_KERNEL); | 
|  | if (!frame) { | 
|  | IWL_ERROR("Could not allocate frame!\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | priv->frames_count++; | 
|  | return frame; | 
|  | } | 
|  |  | 
|  | element = priv->free_frames.next; | 
|  | list_del(element); | 
|  | return list_entry(element, struct iwl_frame, list); | 
|  | } | 
|  |  | 
|  | static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) | 
|  | { | 
|  | memset(frame, 0, sizeof(*frame)); | 
|  | list_add(&frame->list, &priv->free_frames); | 
|  | } | 
|  |  | 
|  | unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, | 
|  | struct ieee80211_hdr *hdr, | 
|  | const u8 *dest, int left) | 
|  | { | 
|  |  | 
|  | if (!iwl_is_associated(priv) || !priv->ibss_beacon || | 
|  | ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && | 
|  | (priv->iw_mode != IEEE80211_IF_TYPE_AP))) | 
|  | return 0; | 
|  |  | 
|  | if (priv->ibss_beacon->len > left) | 
|  | return 0; | 
|  |  | 
|  | memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len); | 
|  |  | 
|  | return priv->ibss_beacon->len; | 
|  | } | 
|  |  | 
|  | int iwl_rate_index_from_plcp(int plcp) | 
|  | { | 
|  | int i = 0; | 
|  |  | 
|  | if (plcp & RATE_MCS_HT_MSK) { | 
|  | i = (plcp & 0xff); | 
|  |  | 
|  | if (i >= IWL_RATE_MIMO_6M_PLCP) | 
|  | i = i - IWL_RATE_MIMO_6M_PLCP; | 
|  |  | 
|  | i += IWL_FIRST_OFDM_RATE; | 
|  | /* skip 9M not supported in ht*/ | 
|  | if (i >= IWL_RATE_9M_INDEX) | 
|  | i += 1; | 
|  | if ((i >= IWL_FIRST_OFDM_RATE) && | 
|  | (i <= IWL_LAST_OFDM_RATE)) | 
|  | return i; | 
|  | } else { | 
|  | for (i = 0; i < ARRAY_SIZE(iwl_rates); i++) | 
|  | if (iwl_rates[i].plcp == (plcp &0xFF)) | 
|  | return i; | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static u8 iwl_rate_get_lowest_plcp(int rate_mask) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; | 
|  | i = iwl_rates[i].next_ieee) { | 
|  | if (rate_mask & (1 << i)) | 
|  | return iwl_rates[i].plcp; | 
|  | } | 
|  |  | 
|  | return IWL_RATE_INVALID; | 
|  | } | 
|  |  | 
|  | static int iwl_send_beacon_cmd(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_frame *frame; | 
|  | unsigned int frame_size; | 
|  | int rc; | 
|  | u8 rate; | 
|  |  | 
|  | frame = iwl_get_free_frame(priv); | 
|  |  | 
|  | if (!frame) { | 
|  | IWL_ERROR("Could not obtain free frame buffer for beacon " | 
|  | "command.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) { | 
|  | rate = iwl_rate_get_lowest_plcp(priv->active_rate_basic & | 
|  | 0xFF0); | 
|  | if (rate == IWL_INVALID_RATE) | 
|  | rate = IWL_RATE_6M_PLCP; | 
|  | } else { | 
|  | rate = iwl_rate_get_lowest_plcp(priv->active_rate_basic & 0xF); | 
|  | if (rate == IWL_INVALID_RATE) | 
|  | rate = IWL_RATE_1M_PLCP; | 
|  | } | 
|  |  | 
|  | frame_size = iwl_hw_get_beacon_cmd(priv, frame, rate); | 
|  |  | 
|  | rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, | 
|  | &frame->u.cmd[0]); | 
|  |  | 
|  | iwl_free_frame(priv, frame); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * EEPROM related functions | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static void get_eeprom_mac(struct iwl_priv *priv, u8 *mac) | 
|  | { | 
|  | memcpy(mac, priv->eeprom.mac_address, 6); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_eeprom_init - read EEPROM contents | 
|  | * | 
|  | * Load the EEPROM from adapter into priv->eeprom | 
|  | * | 
|  | * NOTE:  This routine uses the non-debug IO access functions. | 
|  | */ | 
|  | int iwl_eeprom_init(struct iwl_priv *priv) | 
|  | { | 
|  | u16 *e = (u16 *)&priv->eeprom; | 
|  | u32 gp = iwl_read32(priv, CSR_EEPROM_GP); | 
|  | u32 r; | 
|  | int sz = sizeof(priv->eeprom); | 
|  | int rc; | 
|  | int i; | 
|  | u16 addr; | 
|  |  | 
|  | /* The EEPROM structure has several padding buffers within it | 
|  | * and when adding new EEPROM maps is subject to programmer errors | 
|  | * which may be very difficult to identify without explicitly | 
|  | * checking the resulting size of the eeprom map. */ | 
|  | BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE); | 
|  |  | 
|  | if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) { | 
|  | IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | rc = iwl_eeprom_aqcuire_semaphore(priv); | 
|  | if (rc < 0) { | 
|  | IWL_ERROR("Failed to aqcuire EEPROM semaphore.\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /* eeprom is an array of 16bit values */ | 
|  | for (addr = 0; addr < sz; addr += sizeof(u16)) { | 
|  | _iwl_write32(priv, CSR_EEPROM_REG, addr << 1); | 
|  | _iwl_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD); | 
|  |  | 
|  | for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT; | 
|  | i += IWL_EEPROM_ACCESS_DELAY) { | 
|  | r = _iwl_read_restricted(priv, CSR_EEPROM_REG); | 
|  | if (r & CSR_EEPROM_REG_READ_VALID_MSK) | 
|  | break; | 
|  | udelay(IWL_EEPROM_ACCESS_DELAY); | 
|  | } | 
|  |  | 
|  | if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) { | 
|  | IWL_ERROR("Time out reading EEPROM[%d]", addr); | 
|  | rc = -ETIMEDOUT; | 
|  | goto done; | 
|  | } | 
|  | e[addr / 2] = le16_to_cpu(r >> 16); | 
|  | } | 
|  | rc = 0; | 
|  |  | 
|  | done: | 
|  | iwl_eeprom_release_semaphore(priv); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * Misc. internal state and helper functions | 
|  | * | 
|  | ******************************************************************************/ | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  |  | 
|  | /** | 
|  | * iwl_report_frame - dump frame to syslog during debug sessions | 
|  | * | 
|  | * hack this function to show different aspects of received frames, | 
|  | * including selective frame dumps. | 
|  | * group100 parameter selects whether to show 1 out of 100 good frames. | 
|  | * | 
|  | * TODO:  ieee80211_hdr stuff is common to 3945 and 4965, so frame type | 
|  | *        info output is okay, but some of this stuff (e.g. iwl_rx_frame_stats) | 
|  | *        is 3945-specific and gives bad output for 4965.  Need to split the | 
|  | *        functionality, keep common stuff here. | 
|  | */ | 
|  | void iwl_report_frame(struct iwl_priv *priv, | 
|  | struct iwl_rx_packet *pkt, | 
|  | struct ieee80211_hdr *header, int group100) | 
|  | { | 
|  | u32 to_us; | 
|  | u32 print_summary = 0; | 
|  | u32 print_dump = 0;	/* set to 1 to dump all frames' contents */ | 
|  | u32 hundred = 0; | 
|  | u32 dataframe = 0; | 
|  | u16 fc; | 
|  | u16 seq_ctl; | 
|  | u16 channel; | 
|  | u16 phy_flags; | 
|  | int rate_sym; | 
|  | u16 length; | 
|  | u16 status; | 
|  | u16 bcn_tmr; | 
|  | u32 tsf_low; | 
|  | u64 tsf; | 
|  | u8 rssi; | 
|  | u8 agc; | 
|  | u16 sig_avg; | 
|  | u16 noise_diff; | 
|  | struct iwl_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); | 
|  | struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); | 
|  | struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt); | 
|  | u8 *data = IWL_RX_DATA(pkt); | 
|  |  | 
|  | /* MAC header */ | 
|  | fc = le16_to_cpu(header->frame_control); | 
|  | seq_ctl = le16_to_cpu(header->seq_ctrl); | 
|  |  | 
|  | /* metadata */ | 
|  | channel = le16_to_cpu(rx_hdr->channel); | 
|  | phy_flags = le16_to_cpu(rx_hdr->phy_flags); | 
|  | rate_sym = rx_hdr->rate; | 
|  | length = le16_to_cpu(rx_hdr->len); | 
|  |  | 
|  | /* end-of-frame status and timestamp */ | 
|  | status = le32_to_cpu(rx_end->status); | 
|  | bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); | 
|  | tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; | 
|  | tsf = le64_to_cpu(rx_end->timestamp); | 
|  |  | 
|  | /* signal statistics */ | 
|  | rssi = rx_stats->rssi; | 
|  | agc = rx_stats->agc; | 
|  | sig_avg = le16_to_cpu(rx_stats->sig_avg); | 
|  | noise_diff = le16_to_cpu(rx_stats->noise_diff); | 
|  |  | 
|  | to_us = !compare_ether_addr(header->addr1, priv->mac_addr); | 
|  |  | 
|  | /* if data frame is to us and all is good, | 
|  | *   (optionally) print summary for only 1 out of every 100 */ | 
|  | if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) == | 
|  | (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { | 
|  | dataframe = 1; | 
|  | if (!group100) | 
|  | print_summary = 1;	/* print each frame */ | 
|  | else if (priv->framecnt_to_us < 100) { | 
|  | priv->framecnt_to_us++; | 
|  | print_summary = 0; | 
|  | } else { | 
|  | priv->framecnt_to_us = 0; | 
|  | print_summary = 1; | 
|  | hundred = 1; | 
|  | } | 
|  | } else { | 
|  | /* print summary for all other frames */ | 
|  | print_summary = 1; | 
|  | } | 
|  |  | 
|  | if (print_summary) { | 
|  | char *title; | 
|  | u32 rate; | 
|  |  | 
|  | if (hundred) | 
|  | title = "100Frames"; | 
|  | else if (fc & IEEE80211_FCTL_RETRY) | 
|  | title = "Retry"; | 
|  | else if (ieee80211_is_assoc_response(fc)) | 
|  | title = "AscRsp"; | 
|  | else if (ieee80211_is_reassoc_response(fc)) | 
|  | title = "RasRsp"; | 
|  | else if (ieee80211_is_probe_response(fc)) { | 
|  | title = "PrbRsp"; | 
|  | print_dump = 1;	/* dump frame contents */ | 
|  | } else if (ieee80211_is_beacon(fc)) { | 
|  | title = "Beacon"; | 
|  | print_dump = 1;	/* dump frame contents */ | 
|  | } else if (ieee80211_is_atim(fc)) | 
|  | title = "ATIM"; | 
|  | else if (ieee80211_is_auth(fc)) | 
|  | title = "Auth"; | 
|  | else if (ieee80211_is_deauth(fc)) | 
|  | title = "DeAuth"; | 
|  | else if (ieee80211_is_disassoc(fc)) | 
|  | title = "DisAssoc"; | 
|  | else | 
|  | title = "Frame"; | 
|  |  | 
|  | rate = iwl_rate_index_from_plcp(rate_sym); | 
|  | if (rate == -1) | 
|  | rate = 0; | 
|  | else | 
|  | rate = iwl_rates[rate].ieee / 2; | 
|  |  | 
|  | /* print frame summary. | 
|  | * MAC addresses show just the last byte (for brevity), | 
|  | *    but you can hack it to show more, if you'd like to. */ | 
|  | if (dataframe) | 
|  | IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " | 
|  | "len=%u, rssi=%d, chnl=%d, rate=%u, \n", | 
|  | title, fc, header->addr1[5], | 
|  | length, rssi, channel, rate); | 
|  | else { | 
|  | /* src/dst addresses assume managed mode */ | 
|  | IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " | 
|  | "src=0x%02x, rssi=%u, tim=%lu usec, " | 
|  | "phy=0x%02x, chnl=%d\n", | 
|  | title, fc, header->addr1[5], | 
|  | header->addr3[5], rssi, | 
|  | tsf_low - priv->scan_start_tsf, | 
|  | phy_flags, channel); | 
|  | } | 
|  | } | 
|  | if (print_dump) | 
|  | iwl_print_hex_dump(IWL_DL_RX, data, length); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwl_unset_hw_setting(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->hw_setting.shared_virt) | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | sizeof(struct iwl_shared), | 
|  | priv->hw_setting.shared_virt, | 
|  | priv->hw_setting.shared_phys); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_supported_rate_to_ie - fill in the supported rate in IE field | 
|  | * | 
|  | * return : set the bit for each supported rate insert in ie | 
|  | */ | 
|  | static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, | 
|  | u16 basic_rate, int *left) | 
|  | { | 
|  | u16 ret_rates = 0, bit; | 
|  | int i; | 
|  | u8 *cnt = ie; | 
|  | u8 *rates = ie + 1; | 
|  |  | 
|  | for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { | 
|  | if (bit & supported_rate) { | 
|  | ret_rates |= bit; | 
|  | rates[*cnt] = iwl_rates[i].ieee | | 
|  | ((bit & basic_rate) ? 0x80 : 0x00); | 
|  | (*cnt)++; | 
|  | (*left)--; | 
|  | if ((*left <= 0) || | 
|  | (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret_rates; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | void static iwl_set_ht_capab(struct ieee80211_hw *hw, | 
|  | struct ieee80211_ht_capability *ht_cap, | 
|  | u8 use_wide_chan); | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * iwl_fill_probe_req - fill in all required fields and IE for probe request | 
|  | */ | 
|  | static u16 iwl_fill_probe_req(struct iwl_priv *priv, | 
|  | struct ieee80211_mgmt *frame, | 
|  | int left, int is_direct) | 
|  | { | 
|  | int len = 0; | 
|  | u8 *pos = NULL; | 
|  | u16 active_rates, ret_rates, cck_rates; | 
|  |  | 
|  | /* Make sure there is enough space for the probe request, | 
|  | * two mandatory IEs and the data */ | 
|  | left -= 24; | 
|  | if (left < 0) | 
|  | return 0; | 
|  | len += 24; | 
|  |  | 
|  | frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); | 
|  | memcpy(frame->da, BROADCAST_ADDR, ETH_ALEN); | 
|  | memcpy(frame->sa, priv->mac_addr, ETH_ALEN); | 
|  | memcpy(frame->bssid, BROADCAST_ADDR, ETH_ALEN); | 
|  | frame->seq_ctrl = 0; | 
|  |  | 
|  | /* fill in our indirect SSID IE */ | 
|  | /* ...next IE... */ | 
|  |  | 
|  | left -= 2; | 
|  | if (left < 0) | 
|  | return 0; | 
|  | len += 2; | 
|  | pos = &(frame->u.probe_req.variable[0]); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = 0; | 
|  |  | 
|  | /* fill in our direct SSID IE... */ | 
|  | if (is_direct) { | 
|  | /* ...next IE... */ | 
|  | left -= 2 + priv->essid_len; | 
|  | if (left < 0) | 
|  | return 0; | 
|  | /* ... fill it in... */ | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = priv->essid_len; | 
|  | memcpy(pos, priv->essid, priv->essid_len); | 
|  | pos += priv->essid_len; | 
|  | len += 2 + priv->essid_len; | 
|  | } | 
|  |  | 
|  | /* fill in supported rate */ | 
|  | /* ...next IE... */ | 
|  | left -= 2; | 
|  | if (left < 0) | 
|  | return 0; | 
|  |  | 
|  | /* ... fill it in... */ | 
|  | *pos++ = WLAN_EID_SUPP_RATES; | 
|  | *pos = 0; | 
|  |  | 
|  | priv->active_rate = priv->rates_mask; | 
|  | active_rates = priv->active_rate; | 
|  | priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; | 
|  |  | 
|  | cck_rates = IWL_CCK_RATES_MASK & active_rates; | 
|  | ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, | 
|  | priv->active_rate_basic, &left); | 
|  | active_rates &= ~ret_rates; | 
|  |  | 
|  | ret_rates = iwl_supported_rate_to_ie(pos, active_rates, | 
|  | priv->active_rate_basic, &left); | 
|  | active_rates &= ~ret_rates; | 
|  |  | 
|  | len += 2 + *pos; | 
|  | pos += (*pos) + 1; | 
|  | if (active_rates == 0) | 
|  | goto fill_end; | 
|  |  | 
|  | /* fill in supported extended rate */ | 
|  | /* ...next IE... */ | 
|  | left -= 2; | 
|  | if (left < 0) | 
|  | return 0; | 
|  | /* ... fill it in... */ | 
|  | *pos++ = WLAN_EID_EXT_SUPP_RATES; | 
|  | *pos = 0; | 
|  | iwl_supported_rate_to_ie(pos, active_rates, | 
|  | priv->active_rate_basic, &left); | 
|  | if (*pos > 0) | 
|  | len += 2 + *pos; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | if (is_direct && priv->is_ht_enabled) { | 
|  | u8 use_wide_chan = 1; | 
|  |  | 
|  | if (priv->channel_width != IWL_CHANNEL_WIDTH_40MHZ) | 
|  | use_wide_chan = 0; | 
|  | pos += (*pos) + 1; | 
|  | *pos++ = WLAN_EID_HT_CAPABILITY; | 
|  | *pos++ = sizeof(struct ieee80211_ht_capability); | 
|  | iwl_set_ht_capab(NULL, (struct ieee80211_ht_capability *)pos, | 
|  | use_wide_chan); | 
|  | len += 2 + sizeof(struct ieee80211_ht_capability); | 
|  | } | 
|  | #endif  /*CONFIG_IWLWIFI_HT */ | 
|  |  | 
|  | fill_end: | 
|  | return (u16)len; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * QoS  support | 
|  | */ | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | static int iwl_send_qos_params_command(struct iwl_priv *priv, | 
|  | struct iwl_qosparam_cmd *qos) | 
|  | { | 
|  |  | 
|  | return iwl_send_cmd_pdu(priv, REPLY_QOS_PARAM, | 
|  | sizeof(struct iwl_qosparam_cmd), qos); | 
|  | } | 
|  |  | 
|  | static void iwl_reset_qos(struct iwl_priv *priv) | 
|  | { | 
|  | u16 cw_min = 15; | 
|  | u16 cw_max = 1023; | 
|  | u8 aifs = 2; | 
|  | u8 is_legacy = 0; | 
|  | unsigned long flags; | 
|  | int i; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->qos_data.qos_active = 0; | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) { | 
|  | if (priv->qos_data.qos_enable) | 
|  | priv->qos_data.qos_active = 1; | 
|  | if (!(priv->active_rate & 0xfff0)) { | 
|  | cw_min = 31; | 
|  | is_legacy = 1; | 
|  | } | 
|  | } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { | 
|  | if (priv->qos_data.qos_enable) | 
|  | priv->qos_data.qos_active = 1; | 
|  | } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) { | 
|  | cw_min = 31; | 
|  | is_legacy = 1; | 
|  | } | 
|  |  | 
|  | if (priv->qos_data.qos_active) | 
|  | aifs = 3; | 
|  |  | 
|  | priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min); | 
|  | priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max); | 
|  | priv->qos_data.def_qos_parm.ac[0].aifsn = aifs; | 
|  | priv->qos_data.def_qos_parm.ac[0].edca_txop = 0; | 
|  | priv->qos_data.def_qos_parm.ac[0].reserved1 = 0; | 
|  |  | 
|  | if (priv->qos_data.qos_active) { | 
|  | i = 1; | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min); | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max); | 
|  | priv->qos_data.def_qos_parm.ac[i].aifsn = 7; | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; | 
|  | priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
|  |  | 
|  | i = 2; | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_min = | 
|  | cpu_to_le16((cw_min + 1) / 2 - 1); | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_max = | 
|  | cpu_to_le16(cw_max); | 
|  | priv->qos_data.def_qos_parm.ac[i].aifsn = 2; | 
|  | if (is_legacy) | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
|  | cpu_to_le16(6016); | 
|  | else | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
|  | cpu_to_le16(3008); | 
|  | priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
|  |  | 
|  | i = 3; | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_min = | 
|  | cpu_to_le16((cw_min + 1) / 4 - 1); | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_max = | 
|  | cpu_to_le16((cw_max + 1) / 2 - 1); | 
|  | priv->qos_data.def_qos_parm.ac[i].aifsn = 2; | 
|  | priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
|  | if (is_legacy) | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
|  | cpu_to_le16(3264); | 
|  | else | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
|  | cpu_to_le16(1504); | 
|  | } else { | 
|  | for (i = 1; i < 4; i++) { | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_min = | 
|  | cpu_to_le16(cw_min); | 
|  | priv->qos_data.def_qos_parm.ac[i].cw_max = | 
|  | cpu_to_le16(cw_max); | 
|  | priv->qos_data.def_qos_parm.ac[i].aifsn = aifs; | 
|  | priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; | 
|  | priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
|  | } | 
|  | } | 
|  | IWL_DEBUG_QOS("set QoS to default \n"); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | static void iwl_activate_qos(struct iwl_priv *priv, u8 force) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (priv == NULL) | 
|  | return; | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | if (!priv->qos_data.qos_enable) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->qos_data.def_qos_parm.qos_flags = 0; | 
|  |  | 
|  | if (priv->qos_data.qos_cap.q_AP.queue_request && | 
|  | !priv->qos_data.qos_cap.q_AP.txop_request) | 
|  | priv->qos_data.def_qos_parm.qos_flags |= | 
|  | QOS_PARAM_FLG_TXOP_TYPE_MSK; | 
|  |  | 
|  | if (priv->qos_data.qos_active) | 
|  | priv->qos_data.def_qos_parm.qos_flags |= | 
|  | QOS_PARAM_FLG_UPDATE_EDCA_MSK; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | if (force || iwl_is_associated(priv)) { | 
|  | IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n", | 
|  | priv->qos_data.qos_active); | 
|  |  | 
|  | iwl_send_qos_params_command(priv, | 
|  | &(priv->qos_data.def_qos_parm)); | 
|  | } | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_IWLWIFI_QOS */ | 
|  | /* | 
|  | * Power management (not Tx power!) functions | 
|  | */ | 
|  | #define MSEC_TO_USEC 1024 | 
|  |  | 
|  | #define NOSLP __constant_cpu_to_le16(0), 0, 0 | 
|  | #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 | 
|  | #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC) | 
|  | #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \ | 
|  | __constant_cpu_to_le32(X1), \ | 
|  | __constant_cpu_to_le32(X2), \ | 
|  | __constant_cpu_to_le32(X3), \ | 
|  | __constant_cpu_to_le32(X4)} | 
|  |  | 
|  |  | 
|  | /* default power management (not Tx power) table values */ | 
|  | /* for tim  0-10 */ | 
|  | static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { | 
|  | {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1}, | 
|  | {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1} | 
|  | }; | 
|  |  | 
|  | /* for tim > 10 */ | 
|  | static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { | 
|  | {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), | 
|  | SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), | 
|  | SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), | 
|  | SLP_VEC(2, 6, 9, 9, 0xFF)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, | 
|  | {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), | 
|  | SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} | 
|  | }; | 
|  |  | 
|  | int iwl_power_init_handle(struct iwl_priv *priv) | 
|  | { | 
|  | int rc = 0, i; | 
|  | struct iwl_power_mgr *pow_data; | 
|  | int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC; | 
|  | u16 pci_pm; | 
|  |  | 
|  | IWL_DEBUG_POWER("Initialize power \n"); | 
|  |  | 
|  | pow_data = &(priv->power_data); | 
|  |  | 
|  | memset(pow_data, 0, sizeof(*pow_data)); | 
|  |  | 
|  | pow_data->active_index = IWL_POWER_RANGE_0; | 
|  | pow_data->dtim_val = 0xffff; | 
|  |  | 
|  | memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); | 
|  | memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); | 
|  |  | 
|  | rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm); | 
|  | if (rc != 0) | 
|  | return 0; | 
|  | else { | 
|  | struct iwl_powertable_cmd *cmd; | 
|  |  | 
|  | IWL_DEBUG_POWER("adjust power command flags\n"); | 
|  |  | 
|  | for (i = 0; i < IWL_POWER_AC; i++) { | 
|  | cmd = &pow_data->pwr_range_0[i].cmd; | 
|  |  | 
|  | if (pci_pm & 0x1) | 
|  | cmd->flags &= ~IWL_POWER_PCI_PM_MSK; | 
|  | else | 
|  | cmd->flags |= IWL_POWER_PCI_PM_MSK; | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_update_power_cmd(struct iwl_priv *priv, | 
|  | struct iwl_powertable_cmd *cmd, u32 mode) | 
|  | { | 
|  | int rc = 0, i; | 
|  | u8 skip; | 
|  | u32 max_sleep = 0; | 
|  | struct iwl_power_vec_entry *range; | 
|  | u8 period = 0; | 
|  | struct iwl_power_mgr *pow_data; | 
|  |  | 
|  | if (mode > IWL_POWER_INDEX_5) { | 
|  | IWL_DEBUG_POWER("Error invalid power mode \n"); | 
|  | return -1; | 
|  | } | 
|  | pow_data = &(priv->power_data); | 
|  |  | 
|  | if (pow_data->active_index == IWL_POWER_RANGE_0) | 
|  | range = &pow_data->pwr_range_0[0]; | 
|  | else | 
|  | range = &pow_data->pwr_range_1[1]; | 
|  |  | 
|  | memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd)); | 
|  |  | 
|  | #ifdef IWL_MAC80211_DISABLE | 
|  | if (priv->assoc_network != NULL) { | 
|  | unsigned long flags; | 
|  |  | 
|  | period = priv->assoc_network->tim.tim_period; | 
|  | } | 
|  | #endif	/*IWL_MAC80211_DISABLE */ | 
|  | skip = range[mode].no_dtim; | 
|  |  | 
|  | if (period == 0) { | 
|  | period = 1; | 
|  | skip = 0; | 
|  | } | 
|  |  | 
|  | if (skip == 0) { | 
|  | max_sleep = period; | 
|  | cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; | 
|  | } else { | 
|  | __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]; | 
|  | max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; | 
|  | cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < IWL_POWER_VEC_SIZE; i++) { | 
|  | if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) | 
|  | cmd->sleep_interval[i] = cpu_to_le32(max_sleep); | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags); | 
|  | IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); | 
|  | IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); | 
|  | IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", | 
|  | le32_to_cpu(cmd->sleep_interval[0]), | 
|  | le32_to_cpu(cmd->sleep_interval[1]), | 
|  | le32_to_cpu(cmd->sleep_interval[2]), | 
|  | le32_to_cpu(cmd->sleep_interval[3]), | 
|  | le32_to_cpu(cmd->sleep_interval[4])); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_send_power_mode(struct iwl_priv *priv, u32 mode) | 
|  | { | 
|  | u32 final_mode = mode; | 
|  | int rc; | 
|  | struct iwl_powertable_cmd cmd; | 
|  |  | 
|  | /* If on battery, set to 3, | 
|  | * if plugged into AC power, set to CAM ("continuosly aware mode"), | 
|  | * else user level */ | 
|  | switch (mode) { | 
|  | case IWL_POWER_BATTERY: | 
|  | final_mode = IWL_POWER_INDEX_3; | 
|  | break; | 
|  | case IWL_POWER_AC: | 
|  | final_mode = IWL_POWER_MODE_CAM; | 
|  | break; | 
|  | default: | 
|  | final_mode = mode; | 
|  | break; | 
|  | } | 
|  |  | 
|  | cmd.keep_alive_beacons = 0; | 
|  |  | 
|  | iwl_update_power_cmd(priv, &cmd, final_mode); | 
|  |  | 
|  | rc = iwl_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd); | 
|  |  | 
|  | if (final_mode == IWL_POWER_MODE_CAM) | 
|  | clear_bit(STATUS_POWER_PMI, &priv->status); | 
|  | else | 
|  | set_bit(STATUS_POWER_PMI, &priv->status); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int iwl_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) | 
|  | { | 
|  | /* Filter incoming packets to determine if they are targeted toward | 
|  | * this network, discarding packets coming from ourselves */ | 
|  | switch (priv->iw_mode) { | 
|  | case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source    | BSSID */ | 
|  | /* packets from our adapter are dropped (echo) */ | 
|  | if (!compare_ether_addr(header->addr2, priv->mac_addr)) | 
|  | return 0; | 
|  | /* {broad,multi}cast packets to our IBSS go through */ | 
|  | if (is_multicast_ether_addr(header->addr1)) | 
|  | return !compare_ether_addr(header->addr3, priv->bssid); | 
|  | /* packets to our adapter go through */ | 
|  | return !compare_ether_addr(header->addr1, priv->mac_addr); | 
|  | case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ | 
|  | /* packets from our adapter are dropped (echo) */ | 
|  | if (!compare_ether_addr(header->addr3, priv->mac_addr)) | 
|  | return 0; | 
|  | /* {broad,multi}cast packets to our BSS go through */ | 
|  | if (is_multicast_ether_addr(header->addr1)) | 
|  | return !compare_ether_addr(header->addr2, priv->bssid); | 
|  | /* packets to our adapter go through */ | 
|  | return !compare_ether_addr(header->addr1, priv->mac_addr); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x | 
|  |  | 
|  | const char *iwl_get_tx_fail_reason(u32 status) | 
|  | { | 
|  | switch (status & TX_STATUS_MSK) { | 
|  | case TX_STATUS_SUCCESS: | 
|  | return "SUCCESS"; | 
|  | TX_STATUS_ENTRY(SHORT_LIMIT); | 
|  | TX_STATUS_ENTRY(LONG_LIMIT); | 
|  | TX_STATUS_ENTRY(FIFO_UNDERRUN); | 
|  | TX_STATUS_ENTRY(MGMNT_ABORT); | 
|  | TX_STATUS_ENTRY(NEXT_FRAG); | 
|  | TX_STATUS_ENTRY(LIFE_EXPIRE); | 
|  | TX_STATUS_ENTRY(DEST_PS); | 
|  | TX_STATUS_ENTRY(ABORTED); | 
|  | TX_STATUS_ENTRY(BT_RETRY); | 
|  | TX_STATUS_ENTRY(STA_INVALID); | 
|  | TX_STATUS_ENTRY(FRAG_DROPPED); | 
|  | TX_STATUS_ENTRY(TID_DISABLE); | 
|  | TX_STATUS_ENTRY(FRAME_FLUSHED); | 
|  | TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); | 
|  | TX_STATUS_ENTRY(TX_LOCKED); | 
|  | TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); | 
|  | } | 
|  |  | 
|  | return "UNKNOWN"; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_scan_cancel - Cancel any currently executing HW scan | 
|  | * | 
|  | * NOTE: priv->mutex is not required before calling this function | 
|  | */ | 
|  | static int iwl_scan_cancel(struct iwl_priv *priv) | 
|  | { | 
|  | if (!test_bit(STATUS_SCAN_HW, &priv->status)) { | 
|  | clear_bit(STATUS_SCANNING, &priv->status); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_SCANNING, &priv->status)) { | 
|  | if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) { | 
|  | IWL_DEBUG_SCAN("Queuing scan abort.\n"); | 
|  | set_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | queue_work(priv->workqueue, &priv->abort_scan); | 
|  |  | 
|  | } else | 
|  | IWL_DEBUG_SCAN("Scan abort already in progress.\n"); | 
|  |  | 
|  | return test_bit(STATUS_SCANNING, &priv->status); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_scan_cancel_timeout - Cancel any currently executing HW scan | 
|  | * @ms: amount of time to wait (in milliseconds) for scan to abort | 
|  | * | 
|  | * NOTE: priv->mutex must be held before calling this function | 
|  | */ | 
|  | static int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) | 
|  | { | 
|  | unsigned long now = jiffies; | 
|  | int ret; | 
|  |  | 
|  | ret = iwl_scan_cancel(priv); | 
|  | if (ret && ms) { | 
|  | mutex_unlock(&priv->mutex); | 
|  | while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && | 
|  | test_bit(STATUS_SCANNING, &priv->status)) | 
|  | msleep(1); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | return test_bit(STATUS_SCANNING, &priv->status); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwl_sequence_reset(struct iwl_priv *priv) | 
|  | { | 
|  | /* Reset ieee stats */ | 
|  |  | 
|  | /* We don't reset the net_device_stats (ieee->stats) on | 
|  | * re-association */ | 
|  |  | 
|  | priv->last_seq_num = -1; | 
|  | priv->last_frag_num = -1; | 
|  | priv->last_packet_time = 0; | 
|  |  | 
|  | iwl_scan_cancel(priv); | 
|  | } | 
|  |  | 
|  | #define MAX_UCODE_BEACON_INTERVAL	4096 | 
|  | #define INTEL_CONN_LISTEN_INTERVAL	__constant_cpu_to_le16(0xA) | 
|  |  | 
|  | static __le16 iwl_adjust_beacon_interval(u16 beacon_val) | 
|  | { | 
|  | u16 new_val = 0; | 
|  | u16 beacon_factor = 0; | 
|  |  | 
|  | beacon_factor = | 
|  | (beacon_val + MAX_UCODE_BEACON_INTERVAL) | 
|  | / MAX_UCODE_BEACON_INTERVAL; | 
|  | new_val = beacon_val / beacon_factor; | 
|  |  | 
|  | return cpu_to_le16(new_val); | 
|  | } | 
|  |  | 
|  | static void iwl_setup_rxon_timing(struct iwl_priv *priv) | 
|  | { | 
|  | u64 interval_tm_unit; | 
|  | u64 tsf, result; | 
|  | unsigned long flags; | 
|  | struct ieee80211_conf *conf = NULL; | 
|  | u16 beacon_int = 0; | 
|  |  | 
|  | conf = ieee80211_get_hw_conf(priv->hw); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp1); | 
|  | priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp0); | 
|  |  | 
|  | priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL; | 
|  |  | 
|  | tsf = priv->timestamp1; | 
|  | tsf = ((tsf << 32) | priv->timestamp0); | 
|  |  | 
|  | beacon_int = priv->beacon_int; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { | 
|  | if (beacon_int == 0) { | 
|  | priv->rxon_timing.beacon_interval = cpu_to_le16(100); | 
|  | priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); | 
|  | } else { | 
|  | priv->rxon_timing.beacon_interval = | 
|  | cpu_to_le16(beacon_int); | 
|  | priv->rxon_timing.beacon_interval = | 
|  | iwl_adjust_beacon_interval( | 
|  | le16_to_cpu(priv->rxon_timing.beacon_interval)); | 
|  | } | 
|  |  | 
|  | priv->rxon_timing.atim_window = 0; | 
|  | } else { | 
|  | priv->rxon_timing.beacon_interval = | 
|  | iwl_adjust_beacon_interval(conf->beacon_int); | 
|  | /* TODO: we need to get atim_window from upper stack | 
|  | * for now we set to 0 */ | 
|  | priv->rxon_timing.atim_window = 0; | 
|  | } | 
|  |  | 
|  | interval_tm_unit = | 
|  | (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024); | 
|  | result = do_div(tsf, interval_tm_unit); | 
|  | priv->rxon_timing.beacon_init_val = | 
|  | cpu_to_le32((u32) ((u64) interval_tm_unit - result)); | 
|  |  | 
|  | IWL_DEBUG_ASSOC | 
|  | ("beacon interval %d beacon timer %d beacon tim %d\n", | 
|  | le16_to_cpu(priv->rxon_timing.beacon_interval), | 
|  | le32_to_cpu(priv->rxon_timing.beacon_init_val), | 
|  | le16_to_cpu(priv->rxon_timing.atim_window)); | 
|  | } | 
|  |  | 
|  | static int iwl_scan_initiate(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { | 
|  | IWL_ERROR("APs don't scan.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_SCANNING, &priv->status)) { | 
|  | IWL_DEBUG_SCAN("Scan already in progress.\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { | 
|  | IWL_DEBUG_SCAN("Scan request while abort pending.  " | 
|  | "Queuing.\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("Starting scan...\n"); | 
|  | priv->scan_bands = 2; | 
|  | set_bit(STATUS_SCANNING, &priv->status); | 
|  | priv->scan_start = jiffies; | 
|  | priv->scan_pass_start = priv->scan_start; | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->request_scan); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) | 
|  | { | 
|  | struct iwl_rxon_cmd *rxon = &priv->staging_rxon; | 
|  |  | 
|  | if (hw_decrypt) | 
|  | rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; | 
|  | else | 
|  | rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_set_flags_for_phymode(struct iwl_priv *priv, u8 phymode) | 
|  | { | 
|  | if (phymode == MODE_IEEE80211A) { | 
|  | priv->staging_rxon.flags &= | 
|  | ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 
|  | | RXON_FLG_CCK_MSK); | 
|  | priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | } else { | 
|  | /* Copied from iwl_bg_post_associate() */ | 
|  | if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) | 
|  | priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; | 
|  | priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * initilize rxon structure with default values fromm eeprom | 
|  | */ | 
|  | static void iwl_connection_init_rx_config(struct iwl_priv *priv) | 
|  | { | 
|  | const struct iwl_channel_info *ch_info; | 
|  |  | 
|  | memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); | 
|  |  | 
|  | switch (priv->iw_mode) { | 
|  | case IEEE80211_IF_TYPE_AP: | 
|  | priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_IF_TYPE_STA: | 
|  | priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; | 
|  | priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_IF_TYPE_IBSS: | 
|  | priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; | 
|  | priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | | 
|  | RXON_FILTER_ACCEPT_GRP_MSK; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_IF_TYPE_MNTR: | 
|  | priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; | 
|  | priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | | 
|  | RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; | 
|  | break; | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | /* TODO:  Figure out when short_preamble would be set and cache from | 
|  | * that */ | 
|  | if (!hw_to_local(priv->hw)->short_preamble) | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | #endif | 
|  |  | 
|  | ch_info = iwl_get_channel_info(priv, priv->phymode, | 
|  | le16_to_cpu(priv->staging_rxon.channel)); | 
|  |  | 
|  | if (!ch_info) | 
|  | ch_info = &priv->channel_info[0]; | 
|  |  | 
|  | /* | 
|  | * in some case A channels are all non IBSS | 
|  | * in this case force B/G channel | 
|  | */ | 
|  | if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && | 
|  | !(is_channel_ibss(ch_info))) | 
|  | ch_info = &priv->channel_info[0]; | 
|  |  | 
|  | priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); | 
|  | if (is_channel_a_band(ch_info)) | 
|  | priv->phymode = MODE_IEEE80211A; | 
|  | else | 
|  | priv->phymode = MODE_IEEE80211G; | 
|  |  | 
|  | iwl_set_flags_for_phymode(priv, priv->phymode); | 
|  |  | 
|  | priv->staging_rxon.ofdm_basic_rates = | 
|  | (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | 
|  | priv->staging_rxon.cck_basic_rates = | 
|  | (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | 
|  |  | 
|  | priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | | 
|  | RXON_FLG_CHANNEL_MODE_PURE_40_MSK); | 
|  | memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); | 
|  | memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); | 
|  | priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; | 
|  | priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; | 
|  | iwl4965_set_rxon_chain(priv); | 
|  | } | 
|  |  | 
|  | static int iwl_set_mode(struct iwl_priv *priv, int mode) | 
|  | { | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | if (mode == IEEE80211_IF_TYPE_IBSS) { | 
|  | const struct iwl_channel_info *ch_info; | 
|  |  | 
|  | ch_info = iwl_get_channel_info(priv, | 
|  | priv->phymode, | 
|  | le16_to_cpu(priv->staging_rxon.channel)); | 
|  |  | 
|  | if (!ch_info || !is_channel_ibss(ch_info)) { | 
|  | IWL_ERROR("channel %d not IBSS channel\n", | 
|  | le16_to_cpu(priv->staging_rxon.channel)); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | cancel_delayed_work(&priv->scan_check); | 
|  | if (iwl_scan_cancel_timeout(priv, 100)) { | 
|  | IWL_WARNING("Aborted scan still in progress after 100ms\n"); | 
|  | IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | priv->iw_mode = mode; | 
|  |  | 
|  | iwl_connection_init_rx_config(priv); | 
|  | memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_build_tx_cmd_hwcrypto(struct iwl_priv *priv, | 
|  | struct ieee80211_tx_control *ctl, | 
|  | struct iwl_cmd *cmd, | 
|  | struct sk_buff *skb_frag, | 
|  | int last_frag) | 
|  | { | 
|  | struct iwl_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; | 
|  |  | 
|  | switch (keyinfo->alg) { | 
|  | case ALG_CCMP: | 
|  | cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM; | 
|  | memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen); | 
|  | IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n"); | 
|  | break; | 
|  |  | 
|  | case ALG_TKIP: | 
|  | #if 0 | 
|  | cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP; | 
|  |  | 
|  | if (last_frag) | 
|  | memcpy(cmd->cmd.tx.tkip_mic.byte, skb_frag->tail - 8, | 
|  | 8); | 
|  | else | 
|  | memset(cmd->cmd.tx.tkip_mic.byte, 0, 8); | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | case ALG_WEP: | 
|  | cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP | | 
|  | (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; | 
|  |  | 
|  | if (keyinfo->keylen == 13) | 
|  | cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128; | 
|  |  | 
|  | memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen); | 
|  |  | 
|  | IWL_DEBUG_TX("Configuring packet for WEP encryption " | 
|  | "with key %d\n", ctl->key_idx); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle build REPLY_TX command notification. | 
|  | */ | 
|  | static void iwl_build_tx_cmd_basic(struct iwl_priv *priv, | 
|  | struct iwl_cmd *cmd, | 
|  | struct ieee80211_tx_control *ctrl, | 
|  | struct ieee80211_hdr *hdr, | 
|  | int is_unicast, u8 std_id) | 
|  | { | 
|  | __le16 *qc; | 
|  | u16 fc = le16_to_cpu(hdr->frame_control); | 
|  | __le32 tx_flags = cmd->cmd.tx.tx_flags; | 
|  |  | 
|  | cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; | 
|  | if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) { | 
|  | tx_flags |= TX_CMD_FLG_ACK_MSK; | 
|  | if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) | 
|  | tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; | 
|  | if (ieee80211_is_probe_response(fc) && | 
|  | !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) | 
|  | tx_flags |= TX_CMD_FLG_TSF_MSK; | 
|  | } else { | 
|  | tx_flags &= (~TX_CMD_FLG_ACK_MSK); | 
|  | tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; | 
|  | } | 
|  |  | 
|  | cmd->cmd.tx.sta_id = std_id; | 
|  | if (ieee80211_get_morefrag(hdr)) | 
|  | tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; | 
|  |  | 
|  | qc = ieee80211_get_qos_ctrl(hdr); | 
|  | if (qc) { | 
|  | cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf); | 
|  | tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; | 
|  | } else | 
|  | tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; | 
|  |  | 
|  | if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) { | 
|  | tx_flags |= TX_CMD_FLG_RTS_MSK; | 
|  | tx_flags &= ~TX_CMD_FLG_CTS_MSK; | 
|  | } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) { | 
|  | tx_flags &= ~TX_CMD_FLG_RTS_MSK; | 
|  | tx_flags |= TX_CMD_FLG_CTS_MSK; | 
|  | } | 
|  |  | 
|  | if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK)) | 
|  | tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; | 
|  |  | 
|  | tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); | 
|  | if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { | 
|  | if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ || | 
|  | (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ) | 
|  | cmd->cmd.tx.timeout.pm_frame_timeout = | 
|  | cpu_to_le16(3); | 
|  | else | 
|  | cmd->cmd.tx.timeout.pm_frame_timeout = | 
|  | cpu_to_le16(2); | 
|  | } else | 
|  | cmd->cmd.tx.timeout.pm_frame_timeout = 0; | 
|  |  | 
|  | cmd->cmd.tx.driver_txop = 0; | 
|  | cmd->cmd.tx.tx_flags = tx_flags; | 
|  | cmd->cmd.tx.next_frame_len = 0; | 
|  | } | 
|  |  | 
|  | static int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) | 
|  | { | 
|  | int sta_id; | 
|  | u16 fc = le16_to_cpu(hdr->frame_control); | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | /* If this frame is broadcast or not data then use the broadcast | 
|  | * station id */ | 
|  | if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) || | 
|  | is_multicast_ether_addr(hdr->addr1)) | 
|  | return priv->hw_setting.bcast_sta_id; | 
|  |  | 
|  | switch (priv->iw_mode) { | 
|  |  | 
|  | /* If this frame is part of a BSS network (we're a station), then | 
|  | * we use the AP's station id */ | 
|  | case IEEE80211_IF_TYPE_STA: | 
|  | return IWL_AP_ID; | 
|  |  | 
|  | /* If we are an AP, then find the station, or use BCAST */ | 
|  | case IEEE80211_IF_TYPE_AP: | 
|  | sta_id = iwl_hw_find_station(priv, hdr->addr1); | 
|  | if (sta_id != IWL_INVALID_STATION) | 
|  | return sta_id; | 
|  | return priv->hw_setting.bcast_sta_id; | 
|  |  | 
|  | /* If this frame is part of a IBSS network, then we use the | 
|  | * target specific station id */ | 
|  | case IEEE80211_IF_TYPE_IBSS: | 
|  | sta_id = iwl_hw_find_station(priv, hdr->addr1); | 
|  | if (sta_id != IWL_INVALID_STATION) | 
|  | return sta_id; | 
|  |  | 
|  | sta_id = iwl_add_station(priv, hdr->addr1, 0, CMD_ASYNC); | 
|  |  | 
|  | if (sta_id != IWL_INVALID_STATION) | 
|  | return sta_id; | 
|  |  | 
|  | IWL_DEBUG_DROP("Station %s not in station map. " | 
|  | "Defaulting to broadcast...\n", | 
|  | print_mac(mac, hdr->addr1)); | 
|  | iwl_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); | 
|  | return priv->hw_setting.bcast_sta_id; | 
|  |  | 
|  | default: | 
|  | IWL_WARNING("Unkown mode of operation: %d", priv->iw_mode); | 
|  | return priv->hw_setting.bcast_sta_id; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * start REPLY_TX command process | 
|  | */ | 
|  | static int iwl_tx_skb(struct iwl_priv *priv, | 
|  | struct sk_buff *skb, struct ieee80211_tx_control *ctl) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct iwl_tfd_frame *tfd; | 
|  | u32 *control_flags; | 
|  | int txq_id = ctl->queue; | 
|  | struct iwl_tx_queue *txq = NULL; | 
|  | struct iwl_queue *q = NULL; | 
|  | dma_addr_t phys_addr; | 
|  | dma_addr_t txcmd_phys; | 
|  | struct iwl_cmd *out_cmd = NULL; | 
|  | u16 len, idx, len_org; | 
|  | u8 id, hdr_len, unicast; | 
|  | u8 sta_id; | 
|  | u16 seq_number = 0; | 
|  | u16 fc; | 
|  | __le16 *qc; | 
|  | u8 wait_write_ptr = 0; | 
|  | unsigned long flags; | 
|  | int rc; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (iwl_is_rfkill(priv)) { | 
|  | IWL_DEBUG_DROP("Dropping - RF KILL\n"); | 
|  | goto drop_unlock; | 
|  | } | 
|  |  | 
|  | if (!priv->interface_id) { | 
|  | IWL_DEBUG_DROP("Dropping - !priv->interface_id\n"); | 
|  | goto drop_unlock; | 
|  | } | 
|  |  | 
|  | if ((ctl->tx_rate & 0xFF) == IWL_INVALID_RATE) { | 
|  | IWL_ERROR("ERROR: No TX rate available.\n"); | 
|  | goto drop_unlock; | 
|  | } | 
|  |  | 
|  | unicast = !is_multicast_ether_addr(hdr->addr1); | 
|  | id = 0; | 
|  |  | 
|  | fc = le16_to_cpu(hdr->frame_control); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (ieee80211_is_auth(fc)) | 
|  | IWL_DEBUG_TX("Sending AUTH frame\n"); | 
|  | else if (ieee80211_is_assoc_request(fc)) | 
|  | IWL_DEBUG_TX("Sending ASSOC frame\n"); | 
|  | else if (ieee80211_is_reassoc_request(fc)) | 
|  | IWL_DEBUG_TX("Sending REASSOC frame\n"); | 
|  | #endif | 
|  |  | 
|  | if (!iwl_is_associated(priv) && | 
|  | ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) { | 
|  | IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n"); | 
|  | goto drop_unlock; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | hdr_len = ieee80211_get_hdrlen(fc); | 
|  | sta_id = iwl_get_sta_id(priv, hdr); | 
|  | if (sta_id == IWL_INVALID_STATION) { | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n", | 
|  | print_mac(mac, hdr->addr1)); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE("station Id %d\n", sta_id); | 
|  |  | 
|  | qc = ieee80211_get_qos_ctrl(hdr); | 
|  | if (qc) { | 
|  | u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); | 
|  | seq_number = priv->stations[sta_id].tid[tid].seq_number & | 
|  | IEEE80211_SCTL_SEQ; | 
|  | hdr->seq_ctrl = cpu_to_le16(seq_number) | | 
|  | (hdr->seq_ctrl & | 
|  | __constant_cpu_to_le16(IEEE80211_SCTL_FRAG)); | 
|  | seq_number += 0x10; | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | /* aggregation is on for this <sta,tid> */ | 
|  | if (ctl->flags & IEEE80211_TXCTL_HT_MPDU_AGG) | 
|  | txq_id = priv->stations[sta_id].tid[tid].agg.txq_id; | 
|  | #endif /* CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  | } | 
|  | txq = &priv->txq[txq_id]; | 
|  | q = &txq->q; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | tfd = &txq->bd[q->first_empty]; | 
|  | memset(tfd, 0, sizeof(*tfd)); | 
|  | control_flags = (u32 *) tfd; | 
|  | idx = get_cmd_index(q, q->first_empty, 0); | 
|  |  | 
|  | memset(&(txq->txb[q->first_empty]), 0, sizeof(struct iwl_tx_info)); | 
|  | txq->txb[q->first_empty].skb[0] = skb; | 
|  | memcpy(&(txq->txb[q->first_empty].status.control), | 
|  | ctl, sizeof(struct ieee80211_tx_control)); | 
|  | out_cmd = &txq->cmd[idx]; | 
|  | memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); | 
|  | memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx)); | 
|  | out_cmd->hdr.cmd = REPLY_TX; | 
|  | out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | | 
|  | INDEX_TO_SEQ(q->first_empty))); | 
|  | /* copy frags header */ | 
|  | memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len); | 
|  |  | 
|  | /* hdr = (struct ieee80211_hdr *)out_cmd->cmd.tx.hdr; */ | 
|  | len = priv->hw_setting.tx_cmd_len + | 
|  | sizeof(struct iwl_cmd_header) + hdr_len; | 
|  |  | 
|  | len_org = len; | 
|  | len = (len + 3) & ~3; | 
|  |  | 
|  | if (len_org != len) | 
|  | len_org = 1; | 
|  | else | 
|  | len_org = 0; | 
|  |  | 
|  | txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx + | 
|  | offsetof(struct iwl_cmd, hdr); | 
|  |  | 
|  | iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); | 
|  |  | 
|  | if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) | 
|  | iwl_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, 0); | 
|  |  | 
|  | /* 802.11 null functions have no payload... */ | 
|  | len = skb->len - hdr_len; | 
|  | if (len) { | 
|  | phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, | 
|  | len, PCI_DMA_TODEVICE); | 
|  | iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len); | 
|  | } | 
|  |  | 
|  | if (len_org) | 
|  | out_cmd->cmd.tx.tx_flags |= TX_CMD_FLG_MH_PAD_MSK; | 
|  |  | 
|  | len = (u16)skb->len; | 
|  | out_cmd->cmd.tx.len = cpu_to_le16(len); | 
|  |  | 
|  | /* TODO need this for burst mode later on */ | 
|  | iwl_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id); | 
|  |  | 
|  | /* set is_hcca to 0; it probably will never be implemented */ | 
|  | iwl_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0); | 
|  |  | 
|  | iwl4965_tx_cmd(priv, out_cmd, sta_id, txcmd_phys, | 
|  | hdr, hdr_len, ctl, NULL); | 
|  |  | 
|  | if (!ieee80211_get_morefrag(hdr)) { | 
|  | txq->need_update = 1; | 
|  | if (qc) { | 
|  | u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); | 
|  | priv->stations[sta_id].tid[tid].seq_number = seq_number; | 
|  | } | 
|  | } else { | 
|  | wait_write_ptr = 1; | 
|  | txq->need_update = 0; | 
|  | } | 
|  |  | 
|  | iwl_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload, | 
|  | sizeof(out_cmd->cmd.tx)); | 
|  |  | 
|  | iwl_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr, | 
|  | ieee80211_get_hdrlen(fc)); | 
|  |  | 
|  | iwl4965_tx_queue_update_wr_ptr(priv, txq, len); | 
|  |  | 
|  | q->first_empty = iwl_queue_inc_wrap(q->first_empty, q->n_bd); | 
|  | rc = iwl_tx_queue_update_write_ptr(priv, txq); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | if ((iwl_queue_space(q) < q->high_mark) | 
|  | && priv->mac80211_registered) { | 
|  | if (wait_write_ptr) { | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | txq->need_update = 1; | 
|  | iwl_tx_queue_update_write_ptr(priv, txq); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | ieee80211_stop_queue(priv->hw, ctl->queue); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | drop_unlock: | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | drop: | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void iwl_set_rate(struct iwl_priv *priv) | 
|  | { | 
|  | const struct ieee80211_hw_mode *hw = NULL; | 
|  | struct ieee80211_rate *rate; | 
|  | int i; | 
|  |  | 
|  | hw = iwl_get_hw_mode(priv, priv->phymode); | 
|  | if (!hw) { | 
|  | IWL_ERROR("Failed to set rate: unable to get hw mode\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | priv->active_rate = 0; | 
|  | priv->active_rate_basic = 0; | 
|  |  | 
|  | IWL_DEBUG_RATE("Setting rates for 802.11%c\n", | 
|  | hw->mode == MODE_IEEE80211A ? | 
|  | 'a' : ((hw->mode == MODE_IEEE80211B) ? 'b' : 'g')); | 
|  |  | 
|  | for (i = 0; i < hw->num_rates; i++) { | 
|  | rate = &(hw->rates[i]); | 
|  | if ((rate->val < IWL_RATE_COUNT) && | 
|  | (rate->flags & IEEE80211_RATE_SUPPORTED)) { | 
|  | IWL_DEBUG_RATE("Adding rate index %d (plcp %d)%s\n", | 
|  | rate->val, iwl_rates[rate->val].plcp, | 
|  | (rate->flags & IEEE80211_RATE_BASIC) ? | 
|  | "*" : ""); | 
|  | priv->active_rate |= (1 << rate->val); | 
|  | if (rate->flags & IEEE80211_RATE_BASIC) | 
|  | priv->active_rate_basic |= (1 << rate->val); | 
|  | } else | 
|  | IWL_DEBUG_RATE("Not adding rate %d (plcp %d)\n", | 
|  | rate->val, iwl_rates[rate->val].plcp); | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n", | 
|  | priv->active_rate, priv->active_rate_basic); | 
|  |  | 
|  | /* | 
|  | * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) | 
|  | * otherwise set it to the default of all CCK rates and 6, 12, 24 for | 
|  | * OFDM | 
|  | */ | 
|  | if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) | 
|  | priv->staging_rxon.cck_basic_rates = | 
|  | ((priv->active_rate_basic & | 
|  | IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; | 
|  | else | 
|  | priv->staging_rxon.cck_basic_rates = | 
|  | (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | 
|  |  | 
|  | if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) | 
|  | priv->staging_rxon.ofdm_basic_rates = | 
|  | ((priv->active_rate_basic & | 
|  | (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> | 
|  | IWL_FIRST_OFDM_RATE) & 0xFF; | 
|  | else | 
|  | priv->staging_rxon.ofdm_basic_rates = | 
|  | (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | 
|  | } | 
|  |  | 
|  | static void iwl_radio_kill_sw(struct iwl_priv *priv, int disable_radio) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status)) | 
|  | return; | 
|  |  | 
|  | IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n", | 
|  | disable_radio ? "OFF" : "ON"); | 
|  |  | 
|  | if (disable_radio) { | 
|  | iwl_scan_cancel(priv); | 
|  | /* FIXME: This is a workaround for AP */ | 
|  | if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, | 
|  | CSR_UCODE_SW_BIT_RFKILL); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | iwl_send_card_state(priv, CARD_STATE_CMD_DISABLE, 0); | 
|  | set_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  |  | 
|  | clear_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | /* wake up ucode */ | 
|  | msleep(10); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_read32(priv, CSR_UCODE_DRV_GP1); | 
|  | if (!iwl_grab_restricted_access(priv)) | 
|  | iwl_release_restricted_access(priv); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { | 
|  | IWL_DEBUG_RF_KILL("Can not turn radio back on - " | 
|  | "disabled by HW switch\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | return; | 
|  | } | 
|  |  | 
|  | void iwl_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb, | 
|  | u32 decrypt_res, struct ieee80211_rx_status *stats) | 
|  | { | 
|  | u16 fc = | 
|  | le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control); | 
|  |  | 
|  | if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) | 
|  | return; | 
|  |  | 
|  | if (!(fc & IEEE80211_FCTL_PROTECTED)) | 
|  | return; | 
|  |  | 
|  | IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); | 
|  | switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { | 
|  | case RX_RES_STATUS_SEC_TYPE_TKIP: | 
|  | if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == | 
|  | RX_RES_STATUS_BAD_ICV_MIC) | 
|  | stats->flag |= RX_FLAG_MMIC_ERROR; | 
|  | case RX_RES_STATUS_SEC_TYPE_WEP: | 
|  | case RX_RES_STATUS_SEC_TYPE_CCMP: | 
|  | if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == | 
|  | RX_RES_STATUS_DECRYPT_OK) { | 
|  | IWL_DEBUG_RX("hw decrypt successfully!!!\n"); | 
|  | stats->flag |= RX_FLAG_DECRYPTED; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void iwl_handle_data_packet_monitor(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb, | 
|  | void *data, short len, | 
|  | struct ieee80211_rx_status *stats, | 
|  | u16 phy_flags) | 
|  | { | 
|  | struct iwl_rt_rx_hdr *iwl_rt; | 
|  |  | 
|  | /* First cache any information we need before we overwrite | 
|  | * the information provided in the skb from the hardware */ | 
|  | s8 signal = stats->ssi; | 
|  | s8 noise = 0; | 
|  | int rate = stats->rate; | 
|  | u64 tsf = stats->mactime; | 
|  | __le16 phy_flags_hw = cpu_to_le16(phy_flags); | 
|  |  | 
|  | /* We received data from the HW, so stop the watchdog */ | 
|  | if (len > IWL_RX_BUF_SIZE - sizeof(*iwl_rt)) { | 
|  | IWL_DEBUG_DROP("Dropping too large packet in monitor\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* copy the frame data to write after where the radiotap header goes */ | 
|  | iwl_rt = (void *)rxb->skb->data; | 
|  | memmove(iwl_rt->payload, data, len); | 
|  |  | 
|  | iwl_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; | 
|  | iwl_rt->rt_hdr.it_pad = 0; /* always good to zero */ | 
|  |  | 
|  | /* total header + data */ | 
|  | iwl_rt->rt_hdr.it_len = cpu_to_le16(sizeof(*iwl_rt)); | 
|  |  | 
|  | /* Set the size of the skb to the size of the frame */ | 
|  | skb_put(rxb->skb, sizeof(*iwl_rt) + len); | 
|  |  | 
|  | /* Big bitfield of all the fields we provide in radiotap */ | 
|  | iwl_rt->rt_hdr.it_present = | 
|  | cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | | 
|  | (1 << IEEE80211_RADIOTAP_FLAGS) | | 
|  | (1 << IEEE80211_RADIOTAP_RATE) | | 
|  | (1 << IEEE80211_RADIOTAP_CHANNEL) | | 
|  | (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | | 
|  | (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | | 
|  | (1 << IEEE80211_RADIOTAP_ANTENNA)); | 
|  |  | 
|  | /* Zero the flags, we'll add to them as we go */ | 
|  | iwl_rt->rt_flags = 0; | 
|  |  | 
|  | iwl_rt->rt_tsf = cpu_to_le64(tsf); | 
|  |  | 
|  | /* Convert to dBm */ | 
|  | iwl_rt->rt_dbmsignal = signal; | 
|  | iwl_rt->rt_dbmnoise = noise; | 
|  |  | 
|  | /* Convert the channel frequency and set the flags */ | 
|  | iwl_rt->rt_channelMHz = cpu_to_le16(stats->freq); | 
|  | if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) | 
|  | iwl_rt->rt_chbitmask = | 
|  | cpu_to_le16((IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ)); | 
|  | else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) | 
|  | iwl_rt->rt_chbitmask = | 
|  | cpu_to_le16((IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ)); | 
|  | else	/* 802.11g */ | 
|  | iwl_rt->rt_chbitmask = | 
|  | cpu_to_le16((IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ)); | 
|  |  | 
|  | rate = iwl_rate_index_from_plcp(rate); | 
|  | if (rate == -1) | 
|  | iwl_rt->rt_rate = 0; | 
|  | else | 
|  | iwl_rt->rt_rate = iwl_rates[rate].ieee; | 
|  |  | 
|  | /* antenna number */ | 
|  | iwl_rt->rt_antenna = | 
|  | le16_to_cpu(phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; | 
|  |  | 
|  | /* set the preamble flag if we have it */ | 
|  | if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) | 
|  | iwl_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; | 
|  |  | 
|  | IWL_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len); | 
|  |  | 
|  | stats->flag |= RX_FLAG_RADIOTAP; | 
|  | ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); | 
|  | rxb->skb = NULL; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define IWL_PACKET_RETRY_TIME HZ | 
|  |  | 
|  | int is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) | 
|  | { | 
|  | u16 sc = le16_to_cpu(header->seq_ctrl); | 
|  | u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
|  | u16 frag = sc & IEEE80211_SCTL_FRAG; | 
|  | u16 *last_seq, *last_frag; | 
|  | unsigned long *last_time; | 
|  |  | 
|  | switch (priv->iw_mode) { | 
|  | case IEEE80211_IF_TYPE_IBSS:{ | 
|  | struct list_head *p; | 
|  | struct iwl_ibss_seq *entry = NULL; | 
|  | u8 *mac = header->addr2; | 
|  | int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1); | 
|  |  | 
|  | __list_for_each(p, &priv->ibss_mac_hash[index]) { | 
|  | entry = | 
|  | list_entry(p, struct iwl_ibss_seq, list); | 
|  | if (!compare_ether_addr(entry->mac, mac)) | 
|  | break; | 
|  | } | 
|  | if (p == &priv->ibss_mac_hash[index]) { | 
|  | entry = kzalloc(sizeof(*entry), GFP_ATOMIC); | 
|  | if (!entry) { | 
|  | IWL_ERROR | 
|  | ("Cannot malloc new mac entry\n"); | 
|  | return 0; | 
|  | } | 
|  | memcpy(entry->mac, mac, ETH_ALEN); | 
|  | entry->seq_num = seq; | 
|  | entry->frag_num = frag; | 
|  | entry->packet_time = jiffies; | 
|  | list_add(&entry->list, | 
|  | &priv->ibss_mac_hash[index]); | 
|  | return 0; | 
|  | } | 
|  | last_seq = &entry->seq_num; | 
|  | last_frag = &entry->frag_num; | 
|  | last_time = &entry->packet_time; | 
|  | break; | 
|  | } | 
|  | case IEEE80211_IF_TYPE_STA: | 
|  | last_seq = &priv->last_seq_num; | 
|  | last_frag = &priv->last_frag_num; | 
|  | last_time = &priv->last_packet_time; | 
|  | break; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | if ((*last_seq == seq) && | 
|  | time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) { | 
|  | if (*last_frag == frag) | 
|  | goto drop; | 
|  | if (*last_frag + 1 != frag) | 
|  | /* out-of-order fragment */ | 
|  | goto drop; | 
|  | } else | 
|  | *last_seq = seq; | 
|  |  | 
|  | *last_frag = frag; | 
|  | *last_time = jiffies; | 
|  | return 0; | 
|  |  | 
|  | drop: | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT | 
|  |  | 
|  | #include "iwl-spectrum.h" | 
|  |  | 
|  | #define BEACON_TIME_MASK_LOW	0x00FFFFFF | 
|  | #define BEACON_TIME_MASK_HIGH	0xFF000000 | 
|  | #define TIME_UNIT		1024 | 
|  |  | 
|  | /* | 
|  | * extended beacon time format | 
|  | * time in usec will be changed into a 32-bit value in 8:24 format | 
|  | * the high 1 byte is the beacon counts | 
|  | * the lower 3 bytes is the time in usec within one beacon interval | 
|  | */ | 
|  |  | 
|  | static u32 iwl_usecs_to_beacons(u32 usec, u32 beacon_interval) | 
|  | { | 
|  | u32 quot; | 
|  | u32 rem; | 
|  | u32 interval = beacon_interval * 1024; | 
|  |  | 
|  | if (!interval || !usec) | 
|  | return 0; | 
|  |  | 
|  | quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24); | 
|  | rem = (usec % interval) & BEACON_TIME_MASK_LOW; | 
|  |  | 
|  | return (quot << 24) + rem; | 
|  | } | 
|  |  | 
|  | /* base is usually what we get from ucode with each received frame, | 
|  | * the same as HW timer counter counting down | 
|  | */ | 
|  |  | 
|  | static __le32 iwl_add_beacon_time(u32 base, u32 addon, u32 beacon_interval) | 
|  | { | 
|  | u32 base_low = base & BEACON_TIME_MASK_LOW; | 
|  | u32 addon_low = addon & BEACON_TIME_MASK_LOW; | 
|  | u32 interval = beacon_interval * TIME_UNIT; | 
|  | u32 res = (base & BEACON_TIME_MASK_HIGH) + | 
|  | (addon & BEACON_TIME_MASK_HIGH); | 
|  |  | 
|  | if (base_low > addon_low) | 
|  | res += base_low - addon_low; | 
|  | else if (base_low < addon_low) { | 
|  | res += interval + base_low - addon_low; | 
|  | res += (1 << 24); | 
|  | } else | 
|  | res += (1 << 24); | 
|  |  | 
|  | return cpu_to_le32(res); | 
|  | } | 
|  |  | 
|  | static int iwl_get_measurement(struct iwl_priv *priv, | 
|  | struct ieee80211_measurement_params *params, | 
|  | u8 type) | 
|  | { | 
|  | struct iwl_spectrum_cmd spectrum; | 
|  | struct iwl_rx_packet *res; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_SPECTRUM_MEASUREMENT_CMD, | 
|  | .data = (void *)&spectrum, | 
|  | .meta.flags = CMD_WANT_SKB, | 
|  | }; | 
|  | u32 add_time = le64_to_cpu(params->start_time); | 
|  | int rc; | 
|  | int spectrum_resp_status; | 
|  | int duration = le16_to_cpu(params->duration); | 
|  |  | 
|  | if (iwl_is_associated(priv)) | 
|  | add_time = | 
|  | iwl_usecs_to_beacons( | 
|  | le64_to_cpu(params->start_time) - priv->last_tsf, | 
|  | le16_to_cpu(priv->rxon_timing.beacon_interval)); | 
|  |  | 
|  | memset(&spectrum, 0, sizeof(spectrum)); | 
|  |  | 
|  | spectrum.channel_count = cpu_to_le16(1); | 
|  | spectrum.flags = | 
|  | RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; | 
|  | spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; | 
|  | cmd.len = sizeof(spectrum); | 
|  | spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); | 
|  |  | 
|  | if (iwl_is_associated(priv)) | 
|  | spectrum.start_time = | 
|  | iwl_add_beacon_time(priv->last_beacon_time, | 
|  | add_time, | 
|  | le16_to_cpu(priv->rxon_timing.beacon_interval)); | 
|  | else | 
|  | spectrum.start_time = 0; | 
|  |  | 
|  | spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); | 
|  | spectrum.channels[0].channel = params->channel; | 
|  | spectrum.channels[0].type = type; | 
|  | if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK) | 
|  | spectrum.flags |= RXON_FLG_BAND_24G_MSK | | 
|  | RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; | 
|  |  | 
|  | rc = iwl_send_cmd_sync(priv, &cmd); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; | 
|  | if (res->hdr.flags & IWL_CMD_FAILED_MSK) { | 
|  | IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n"); | 
|  | rc = -EIO; | 
|  | } | 
|  |  | 
|  | spectrum_resp_status = le16_to_cpu(res->u.spectrum.status); | 
|  | switch (spectrum_resp_status) { | 
|  | case 0:		/* Command will be handled */ | 
|  | if (res->u.spectrum.id != 0xff) { | 
|  | IWL_DEBUG_INFO | 
|  | ("Replaced existing measurement: %d\n", | 
|  | res->u.spectrum.id); | 
|  | priv->measurement_status &= ~MEASUREMENT_READY; | 
|  | } | 
|  | priv->measurement_status |= MEASUREMENT_ACTIVE; | 
|  | rc = 0; | 
|  | break; | 
|  |  | 
|  | case 1:		/* Command will not be handled */ | 
|  | rc = -EAGAIN; | 
|  | break; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb_any(cmd.meta.u.skb); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwl_txstatus_to_ieee(struct iwl_priv *priv, | 
|  | struct iwl_tx_info *tx_sta) | 
|  | { | 
|  |  | 
|  | tx_sta->status.ack_signal = 0; | 
|  | tx_sta->status.excessive_retries = 0; | 
|  | tx_sta->status.queue_length = 0; | 
|  | tx_sta->status.queue_number = 0; | 
|  |  | 
|  | if (in_interrupt()) | 
|  | ieee80211_tx_status_irqsafe(priv->hw, | 
|  | tx_sta->skb[0], &(tx_sta->status)); | 
|  | else | 
|  | ieee80211_tx_status(priv->hw, | 
|  | tx_sta->skb[0], &(tx_sta->status)); | 
|  |  | 
|  | tx_sta->skb[0] = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_tx_queue_reclaim - Reclaim Tx queue entries no more used by NIC. | 
|  | * | 
|  | * When FW advances 'R' index, all entries between old and | 
|  | * new 'R' index need to be reclaimed. As result, some free space | 
|  | * forms. If there is enough free space (> low mark), wake Tx queue. | 
|  | */ | 
|  | int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) | 
|  | { | 
|  | struct iwl_tx_queue *txq = &priv->txq[txq_id]; | 
|  | struct iwl_queue *q = &txq->q; | 
|  | int nfreed = 0; | 
|  |  | 
|  | if ((index >= q->n_bd) || (x2_queue_used(q, index) == 0)) { | 
|  | IWL_ERROR("Read index for DMA queue txq id (%d), index %d, " | 
|  | "is out of range [0-%d] %d %d.\n", txq_id, | 
|  | index, q->n_bd, q->first_empty, q->last_used); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (index = iwl_queue_inc_wrap(index, q->n_bd); | 
|  | q->last_used != index; | 
|  | q->last_used = iwl_queue_inc_wrap(q->last_used, q->n_bd)) { | 
|  | if (txq_id != IWL_CMD_QUEUE_NUM) { | 
|  | iwl_txstatus_to_ieee(priv, | 
|  | &(txq->txb[txq->q.last_used])); | 
|  | iwl_hw_txq_free_tfd(priv, txq); | 
|  | } else if (nfreed > 1) { | 
|  | IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index, | 
|  | q->first_empty, q->last_used); | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  | nfreed++; | 
|  | } | 
|  |  | 
|  | if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) && | 
|  | (txq_id != IWL_CMD_QUEUE_NUM) && | 
|  | priv->mac80211_registered) | 
|  | ieee80211_wake_queue(priv->hw, txq_id); | 
|  |  | 
|  |  | 
|  | return nfreed; | 
|  | } | 
|  |  | 
|  | static int iwl_is_tx_success(u32 status) | 
|  | { | 
|  | status &= TX_STATUS_MSK; | 
|  | return (status == TX_STATUS_SUCCESS) | 
|  | || (status == TX_STATUS_DIRECT_DONE); | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * Generic RX handler implementations | 
|  | * | 
|  | ******************************************************************************/ | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  |  | 
|  | static inline int iwl_get_ra_sta_id(struct iwl_priv *priv, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_STA) | 
|  | return IWL_AP_ID; | 
|  | else { | 
|  | u8 *da = ieee80211_get_DA(hdr); | 
|  | return iwl_hw_find_station(priv, da); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct ieee80211_hdr *iwl_tx_queue_get_hdr( | 
|  | struct iwl_priv *priv, int txq_id, int idx) | 
|  | { | 
|  | if (priv->txq[txq_id].txb[idx].skb[0]) | 
|  | return (struct ieee80211_hdr *)priv->txq[txq_id]. | 
|  | txb[idx].skb[0]->data; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static inline u32 iwl_get_scd_ssn(struct iwl_tx_resp *tx_resp) | 
|  | { | 
|  | __le32 *scd_ssn = (__le32 *)((u32 *)&tx_resp->status + | 
|  | tx_resp->frame_count); | 
|  | return le32_to_cpu(*scd_ssn) & MAX_SN; | 
|  |  | 
|  | } | 
|  | static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, | 
|  | struct iwl_ht_agg *agg, | 
|  | struct iwl_tx_resp *tx_resp, | 
|  | u16 start_idx) | 
|  | { | 
|  | u32 status; | 
|  | __le32 *frame_status = &tx_resp->status; | 
|  | struct ieee80211_tx_status *tx_status = NULL; | 
|  | struct ieee80211_hdr *hdr = NULL; | 
|  | int i, sh; | 
|  | int txq_id, idx; | 
|  | u16 seq; | 
|  |  | 
|  | if (agg->wait_for_ba) | 
|  | IWL_DEBUG_TX_REPLY("got tx repsons w/o back\n"); | 
|  |  | 
|  | agg->frame_count = tx_resp->frame_count; | 
|  | agg->start_idx = start_idx; | 
|  | agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); | 
|  | agg->bitmap0 = agg->bitmap1 = 0; | 
|  |  | 
|  | if (agg->frame_count == 1) { | 
|  | struct iwl_tx_queue *txq ; | 
|  | status = le32_to_cpu(frame_status[0]); | 
|  |  | 
|  | txq_id = agg->txq_id; | 
|  | txq = &priv->txq[txq_id]; | 
|  | /* FIXME: code repetition */ | 
|  | IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d \n", | 
|  | agg->frame_count, agg->start_idx); | 
|  |  | 
|  | tx_status = &(priv->txq[txq_id].txb[txq->q.last_used].status); | 
|  | tx_status->retry_count = tx_resp->failure_frame; | 
|  | tx_status->queue_number = status & 0xff; | 
|  | tx_status->queue_length = tx_resp->bt_kill_count; | 
|  | tx_status->queue_length |= tx_resp->failure_rts; | 
|  |  | 
|  | tx_status->flags = iwl_is_tx_success(status)? | 
|  | IEEE80211_TX_STATUS_ACK : 0; | 
|  | tx_status->control.tx_rate = | 
|  | iwl_hw_get_rate_n_flags(tx_resp->rate_n_flags); | 
|  | /* FIXME: code repetition end */ | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n", | 
|  | status & 0xff, tx_resp->failure_frame); | 
|  | IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", | 
|  | iwl_hw_get_rate_n_flags(tx_resp->rate_n_flags)); | 
|  |  | 
|  | agg->wait_for_ba = 0; | 
|  | } else { | 
|  | u64 bitmap = 0; | 
|  | int start = agg->start_idx; | 
|  |  | 
|  | for (i = 0; i < agg->frame_count; i++) { | 
|  | u16 sc; | 
|  | status = le32_to_cpu(frame_status[i]); | 
|  | seq  = status >> 16; | 
|  | idx = SEQ_TO_INDEX(seq); | 
|  | txq_id = SEQ_TO_QUEUE(seq); | 
|  |  | 
|  | if (status & (AGG_TX_STATE_FEW_BYTES_MSK | | 
|  | AGG_TX_STATE_ABORT_MSK)) | 
|  | continue; | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", | 
|  | agg->frame_count, txq_id, idx); | 
|  |  | 
|  | hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); | 
|  |  | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | if (idx != (SEQ_TO_SN(sc) & 0xff)) { | 
|  | IWL_ERROR("BUG_ON idx doesn't match seq control" | 
|  | " idx=%d, seq_idx=%d, seq=%d\n", | 
|  | idx, SEQ_TO_SN(sc), | 
|  | hdr->seq_ctrl); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", | 
|  | i, idx, SEQ_TO_SN(sc)); | 
|  |  | 
|  | sh = idx - start; | 
|  | if (sh > 64) { | 
|  | sh = (start - idx) + 0xff; | 
|  | bitmap = bitmap << sh; | 
|  | sh = 0; | 
|  | start = idx; | 
|  | } else if (sh < -64) | 
|  | sh  = 0xff - (start - idx); | 
|  | else if (sh < 0) { | 
|  | sh = start - idx; | 
|  | start = idx; | 
|  | bitmap = bitmap << sh; | 
|  | sh = 0; | 
|  | } | 
|  | bitmap |= (1 << sh); | 
|  | IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", | 
|  | start, (u32)(bitmap & 0xFFFFFFFF)); | 
|  | } | 
|  |  | 
|  | agg->bitmap0 = bitmap & 0xFFFFFFFF; | 
|  | agg->bitmap1 = bitmap >> 32; | 
|  | agg->start_idx = start; | 
|  | agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); | 
|  | IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%x\n", | 
|  | agg->frame_count, agg->start_idx, | 
|  | agg->bitmap0); | 
|  |  | 
|  | if (bitmap) | 
|  | agg->wait_for_ba = 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | static void iwl_rx_reply_tx(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | u16 sequence = le16_to_cpu(pkt->hdr.sequence); | 
|  | int txq_id = SEQ_TO_QUEUE(sequence); | 
|  | int index = SEQ_TO_INDEX(sequence); | 
|  | struct iwl_tx_queue *txq = &priv->txq[txq_id]; | 
|  | struct ieee80211_tx_status *tx_status; | 
|  | struct iwl_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; | 
|  | u32  status = le32_to_cpu(tx_resp->status); | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | int tid, sta_id; | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | if ((index >= txq->q.n_bd) || (x2_queue_used(&txq->q, index) == 0)) { | 
|  | IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " | 
|  | "is out of range [0-%d] %d %d\n", txq_id, | 
|  | index, txq->q.n_bd, txq->q.first_empty, | 
|  | txq->q.last_used); | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | if (txq->sched_retry) { | 
|  | const u32 scd_ssn = iwl_get_scd_ssn(tx_resp); | 
|  | struct ieee80211_hdr *hdr = | 
|  | iwl_tx_queue_get_hdr(priv, txq_id, index); | 
|  | struct iwl_ht_agg *agg = NULL; | 
|  | __le16 *qc = ieee80211_get_qos_ctrl(hdr); | 
|  |  | 
|  | if (qc == NULL) { | 
|  | IWL_ERROR("BUG_ON qc is null!!!!\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | tid = le16_to_cpu(*qc) & 0xf; | 
|  |  | 
|  | sta_id = iwl_get_ra_sta_id(priv, hdr); | 
|  | if (unlikely(sta_id == IWL_INVALID_STATION)) { | 
|  | IWL_ERROR("Station not known for\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | agg = &priv->stations[sta_id].tid[tid].agg; | 
|  |  | 
|  | iwl4965_tx_status_reply_tx(priv, agg, tx_resp, index); | 
|  |  | 
|  | if ((tx_resp->frame_count == 1) && | 
|  | !iwl_is_tx_success(status)) { | 
|  | /* TODO: send BAR */ | 
|  | } | 
|  |  | 
|  | if ((txq->q.last_used != (scd_ssn & 0xff))) { | 
|  | index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); | 
|  | IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn " | 
|  | "%d index %d\n", scd_ssn , index); | 
|  | iwl_tx_queue_reclaim(priv, txq_id, index); | 
|  | } | 
|  | } else { | 
|  | #endif /* CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  | tx_status = &(txq->txb[txq->q.last_used].status); | 
|  |  | 
|  | tx_status->retry_count = tx_resp->failure_frame; | 
|  | tx_status->queue_number = status; | 
|  | tx_status->queue_length = tx_resp->bt_kill_count; | 
|  | tx_status->queue_length |= tx_resp->failure_rts; | 
|  |  | 
|  | tx_status->flags = | 
|  | iwl_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0; | 
|  |  | 
|  | tx_status->control.tx_rate = | 
|  | iwl_hw_get_rate_n_flags(tx_resp->rate_n_flags); | 
|  |  | 
|  | IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags 0x%x " | 
|  | "retries %d\n", txq_id, iwl_get_tx_fail_reason(status), | 
|  | status, le32_to_cpu(tx_resp->rate_n_flags), | 
|  | tx_resp->failure_frame); | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); | 
|  | if (index != -1) | 
|  | iwl_tx_queue_reclaim(priv, txq_id, index); | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | } | 
|  | #endif /* CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  |  | 
|  | if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) | 
|  | IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n"); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void iwl_rx_reply_alive(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_alive_resp *palive; | 
|  | struct delayed_work *pwork; | 
|  |  | 
|  | palive = &pkt->u.alive_frame; | 
|  |  | 
|  | IWL_DEBUG_INFO("Alive ucode status 0x%08X revision " | 
|  | "0x%01X 0x%01X\n", | 
|  | palive->is_valid, palive->ver_type, | 
|  | palive->ver_subtype); | 
|  |  | 
|  | if (palive->ver_subtype == INITIALIZE_SUBTYPE) { | 
|  | IWL_DEBUG_INFO("Initialization Alive received.\n"); | 
|  | memcpy(&priv->card_alive_init, | 
|  | &pkt->u.alive_frame, | 
|  | sizeof(struct iwl_init_alive_resp)); | 
|  | pwork = &priv->init_alive_start; | 
|  | } else { | 
|  | IWL_DEBUG_INFO("Runtime Alive received.\n"); | 
|  | memcpy(&priv->card_alive, &pkt->u.alive_frame, | 
|  | sizeof(struct iwl_alive_resp)); | 
|  | pwork = &priv->alive_start; | 
|  | } | 
|  |  | 
|  | /* We delay the ALIVE response by 5ms to | 
|  | * give the HW RF Kill time to activate... */ | 
|  | if (palive->is_valid == UCODE_VALID_OK) | 
|  | queue_delayed_work(priv->workqueue, pwork, | 
|  | msecs_to_jiffies(5)); | 
|  | else | 
|  | IWL_WARNING("uCode did not respond OK.\n"); | 
|  | } | 
|  |  | 
|  | static void iwl_rx_reply_add_sta(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  |  | 
|  | IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void iwl_rx_reply_error(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  |  | 
|  | IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " | 
|  | "seq 0x%04X ser 0x%08X\n", | 
|  | le32_to_cpu(pkt->u.err_resp.error_type), | 
|  | get_cmd_string(pkt->u.err_resp.cmd_id), | 
|  | pkt->u.err_resp.cmd_id, | 
|  | le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), | 
|  | le32_to_cpu(pkt->u.err_resp.error_info)); | 
|  | } | 
|  |  | 
|  | #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x | 
|  |  | 
|  | static void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; | 
|  | struct iwl_csa_notification *csa = &(pkt->u.csa_notif); | 
|  | IWL_DEBUG_11H("CSA notif: channel %d, status %d\n", | 
|  | le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); | 
|  | rxon->channel = csa->channel; | 
|  | priv->staging_rxon.channel = csa->channel; | 
|  | } | 
|  |  | 
|  | static void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif); | 
|  |  | 
|  | if (!report->state) { | 
|  | IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO, | 
|  | "Spectrum Measure Notification: Start\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memcpy(&priv->measure_report, report, sizeof(*report)); | 
|  | priv->measurement_status |= MEASUREMENT_READY; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif); | 
|  | IWL_DEBUG_RX("sleep mode: %d, src: %d\n", | 
|  | sleep->pm_sleep_mode, sleep->pm_wakeup_src); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | IWL_DEBUG_RADIO("Dumping %d bytes of unhandled " | 
|  | "notification for %s:\n", | 
|  | le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); | 
|  | iwl_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len)); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_beacon_update(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, beacon_update); | 
|  | struct sk_buff *beacon; | 
|  |  | 
|  | /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ | 
|  | beacon = ieee80211_beacon_get(priv->hw, priv->interface_id, NULL); | 
|  |  | 
|  | if (!beacon) { | 
|  | IWL_ERROR("update beacon failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | /* new beacon skb is allocated every time; dispose previous.*/ | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  |  | 
|  | priv->ibss_beacon = beacon; | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | iwl_send_beacon_cmd(priv); | 
|  | } | 
|  |  | 
|  | static void iwl_rx_beacon_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_beacon_notif *beacon = &(pkt->u.beacon_status); | 
|  | u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); | 
|  |  | 
|  | IWL_DEBUG_RX("beacon status %x retries %d iss %d " | 
|  | "tsf %d %d rate %d\n", | 
|  | le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, | 
|  | beacon->beacon_notify_hdr.failure_frame, | 
|  | le32_to_cpu(beacon->ibss_mgr_status), | 
|  | le32_to_cpu(beacon->high_tsf), | 
|  | le32_to_cpu(beacon->low_tsf), rate); | 
|  | #endif | 
|  |  | 
|  | if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && | 
|  | (!test_bit(STATUS_EXIT_PENDING, &priv->status))) | 
|  | queue_work(priv->workqueue, &priv->beacon_update); | 
|  | } | 
|  |  | 
|  | /* Service response to REPLY_SCAN_CMD (0x80) */ | 
|  | static void iwl_rx_reply_scan(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_scanreq_notification *notif = | 
|  | (struct iwl_scanreq_notification *)pkt->u.raw; | 
|  |  | 
|  | IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* Service SCAN_START_NOTIFICATION (0x82) */ | 
|  | static void iwl_rx_scan_start_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_scanstart_notification *notif = | 
|  | (struct iwl_scanstart_notification *)pkt->u.raw; | 
|  | priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); | 
|  | IWL_DEBUG_SCAN("Scan start: " | 
|  | "%d [802.11%s] " | 
|  | "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", | 
|  | notif->channel, | 
|  | notif->band ? "bg" : "a", | 
|  | notif->tsf_high, | 
|  | notif->tsf_low, notif->status, notif->beacon_timer); | 
|  | } | 
|  |  | 
|  | /* Service SCAN_RESULTS_NOTIFICATION (0x83) */ | 
|  | static void iwl_rx_scan_results_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_scanresults_notification *notif = | 
|  | (struct iwl_scanresults_notification *)pkt->u.raw; | 
|  |  | 
|  | IWL_DEBUG_SCAN("Scan ch.res: " | 
|  | "%d [802.11%s] " | 
|  | "(TSF: 0x%08X:%08X) - %d " | 
|  | "elapsed=%lu usec (%dms since last)\n", | 
|  | notif->channel, | 
|  | notif->band ? "bg" : "a", | 
|  | le32_to_cpu(notif->tsf_high), | 
|  | le32_to_cpu(notif->tsf_low), | 
|  | le32_to_cpu(notif->statistics[0]), | 
|  | le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf, | 
|  | jiffies_to_msecs(elapsed_jiffies | 
|  | (priv->last_scan_jiffies, jiffies))); | 
|  |  | 
|  | priv->last_scan_jiffies = jiffies; | 
|  | } | 
|  |  | 
|  | /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ | 
|  | static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; | 
|  |  | 
|  | IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", | 
|  | scan_notif->scanned_channels, | 
|  | scan_notif->tsf_low, | 
|  | scan_notif->tsf_high, scan_notif->status); | 
|  |  | 
|  | /* The HW is no longer scanning */ | 
|  | clear_bit(STATUS_SCAN_HW, &priv->status); | 
|  |  | 
|  | /* The scan completion notification came in, so kill that timer... */ | 
|  | cancel_delayed_work(&priv->scan_check); | 
|  |  | 
|  | IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", | 
|  | (priv->scan_bands == 2) ? "2.4" : "5.2", | 
|  | jiffies_to_msecs(elapsed_jiffies | 
|  | (priv->scan_pass_start, jiffies))); | 
|  |  | 
|  | /* Remove this scanned band from the list | 
|  | * of pending bands to scan */ | 
|  | priv->scan_bands--; | 
|  |  | 
|  | /* If a request to abort was given, or the scan did not succeed | 
|  | * then we reset the scan state machine and terminate, | 
|  | * re-queuing another scan if one has been requested */ | 
|  | if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { | 
|  | IWL_DEBUG_INFO("Aborted scan completed.\n"); | 
|  | clear_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | } else { | 
|  | /* If there are more bands on this scan pass reschedule */ | 
|  | if (priv->scan_bands > 0) | 
|  | goto reschedule; | 
|  | } | 
|  |  | 
|  | priv->last_scan_jiffies = jiffies; | 
|  | IWL_DEBUG_INFO("Setting scan to off\n"); | 
|  |  | 
|  | clear_bit(STATUS_SCANNING, &priv->status); | 
|  |  | 
|  | IWL_DEBUG_INFO("Scan took %dms\n", | 
|  | jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies))); | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->scan_completed); | 
|  |  | 
|  | return; | 
|  |  | 
|  | reschedule: | 
|  | priv->scan_pass_start = jiffies; | 
|  | queue_work(priv->workqueue, &priv->request_scan); | 
|  | } | 
|  |  | 
|  | /* Handle notification from uCode that card's power state is changing | 
|  | * due to software, hardware, or critical temperature RFKILL */ | 
|  | static void iwl_rx_card_state_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (void *)rxb->skb->data; | 
|  | u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); | 
|  | unsigned long status = priv->status; | 
|  |  | 
|  | IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n", | 
|  | (flags & HW_CARD_DISABLED) ? "Kill" : "On", | 
|  | (flags & SW_CARD_DISABLED) ? "Kill" : "On"); | 
|  |  | 
|  | if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | | 
|  | RF_CARD_DISABLED)) { | 
|  |  | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, | 
|  | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | 
|  |  | 
|  | if (!iwl_grab_restricted_access(priv)) { | 
|  | iwl_write_restricted( | 
|  | priv, HBUS_TARG_MBX_C, | 
|  | HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  |  | 
|  | if (!(flags & RXON_CARD_DISABLED)) { | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | 
|  | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | 
|  | if (!iwl_grab_restricted_access(priv)) { | 
|  | iwl_write_restricted( | 
|  | priv, HBUS_TARG_MBX_C, | 
|  | HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (flags & RF_CARD_DISABLED) { | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, | 
|  | CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); | 
|  | iwl_read32(priv, CSR_UCODE_DRV_GP1); | 
|  | if (!iwl_grab_restricted_access(priv)) | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (flags & HW_CARD_DISABLED) | 
|  | set_bit(STATUS_RF_KILL_HW, &priv->status); | 
|  | else | 
|  | clear_bit(STATUS_RF_KILL_HW, &priv->status); | 
|  |  | 
|  |  | 
|  | if (flags & SW_CARD_DISABLED) | 
|  | set_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  | else | 
|  | clear_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  |  | 
|  | if (!(flags & RXON_CARD_DISABLED)) | 
|  | iwl_scan_cancel(priv); | 
|  |  | 
|  | if ((test_bit(STATUS_RF_KILL_HW, &status) != | 
|  | test_bit(STATUS_RF_KILL_HW, &priv->status)) || | 
|  | (test_bit(STATUS_RF_KILL_SW, &status) != | 
|  | test_bit(STATUS_RF_KILL_SW, &priv->status))) | 
|  | queue_work(priv->workqueue, &priv->rf_kill); | 
|  | else | 
|  | wake_up_interruptible(&priv->wait_command_queue); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_setup_rx_handlers - Initialize Rx handler callbacks | 
|  | * | 
|  | * Setup the RX handlers for each of the reply types sent from the uCode | 
|  | * to the host. | 
|  | * | 
|  | * This function chains into the hardware specific files for them to setup | 
|  | * any hardware specific handlers as well. | 
|  | */ | 
|  | static void iwl_setup_rx_handlers(struct iwl_priv *priv) | 
|  | { | 
|  | priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive; | 
|  | priv->rx_handlers[REPLY_ADD_STA] = iwl_rx_reply_add_sta; | 
|  | priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error; | 
|  | priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa; | 
|  | priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = | 
|  | iwl_rx_spectrum_measure_notif; | 
|  | priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif; | 
|  | priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = | 
|  | iwl_rx_pm_debug_statistics_notif; | 
|  | priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif; | 
|  |  | 
|  | /* NOTE:  iwl_rx_statistics is different based on whether | 
|  | * the build is for the 3945 or the 4965.  See the | 
|  | * corresponding implementation in iwl-XXXX.c | 
|  | * | 
|  | * The same handler is used for both the REPLY to a | 
|  | * discrete statistics request from the host as well as | 
|  | * for the periodic statistics notification from the uCode | 
|  | */ | 
|  | priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_hw_rx_statistics; | 
|  | priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_hw_rx_statistics; | 
|  |  | 
|  | priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; | 
|  | priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; | 
|  | priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = | 
|  | iwl_rx_scan_results_notif; | 
|  | priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = | 
|  | iwl_rx_scan_complete_notif; | 
|  | priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif; | 
|  | priv->rx_handlers[REPLY_TX] = iwl_rx_reply_tx; | 
|  |  | 
|  | /* Setup hardware specific Rx handlers */ | 
|  | iwl_hw_rx_handler_setup(priv); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them | 
|  | * @rxb: Rx buffer to reclaim | 
|  | * | 
|  | * If an Rx buffer has an async callback associated with it the callback | 
|  | * will be executed.  The attached skb (if present) will only be freed | 
|  | * if the callback returns 1 | 
|  | */ | 
|  | static void iwl_tx_cmd_complete(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
|  | u16 sequence = le16_to_cpu(pkt->hdr.sequence); | 
|  | int txq_id = SEQ_TO_QUEUE(sequence); | 
|  | int index = SEQ_TO_INDEX(sequence); | 
|  | int huge = sequence & SEQ_HUGE_FRAME; | 
|  | int cmd_index; | 
|  | struct iwl_cmd *cmd; | 
|  |  | 
|  | /* If a Tx command is being handled and it isn't in the actual | 
|  | * command queue then there a command routing bug has been introduced | 
|  | * in the queue management code. */ | 
|  | if (txq_id != IWL_CMD_QUEUE_NUM) | 
|  | IWL_ERROR("Error wrong command queue %d command id 0x%X\n", | 
|  | txq_id, pkt->hdr.cmd); | 
|  | BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); | 
|  |  | 
|  | cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); | 
|  | cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; | 
|  |  | 
|  | /* Input error checking is done when commands are added to queue. */ | 
|  | if (cmd->meta.flags & CMD_WANT_SKB) { | 
|  | cmd->meta.source->u.skb = rxb->skb; | 
|  | rxb->skb = NULL; | 
|  | } else if (cmd->meta.u.callback && | 
|  | !cmd->meta.u.callback(priv, cmd, rxb->skb)) | 
|  | rxb->skb = NULL; | 
|  |  | 
|  | iwl_tx_queue_reclaim(priv, txq_id, index); | 
|  |  | 
|  | if (!(cmd->meta.flags & CMD_ASYNC)) { | 
|  | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | 
|  | wake_up_interruptible(&priv->wait_command_queue); | 
|  | } | 
|  | } | 
|  |  | 
|  | /************************** RX-FUNCTIONS ****************************/ | 
|  | /* | 
|  | * Rx theory of operation | 
|  | * | 
|  | * The host allocates 32 DMA target addresses and passes the host address | 
|  | * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is | 
|  | * 0 to 31 | 
|  | * | 
|  | * Rx Queue Indexes | 
|  | * The host/firmware share two index registers for managing the Rx buffers. | 
|  | * | 
|  | * The READ index maps to the first position that the firmware may be writing | 
|  | * to -- the driver can read up to (but not including) this position and get | 
|  | * good data. | 
|  | * The READ index is managed by the firmware once the card is enabled. | 
|  | * | 
|  | * The WRITE index maps to the last position the driver has read from -- the | 
|  | * position preceding WRITE is the last slot the firmware can place a packet. | 
|  | * | 
|  | * The queue is empty (no good data) if WRITE = READ - 1, and is full if | 
|  | * WRITE = READ. | 
|  | * | 
|  | * During initialization the host sets up the READ queue position to the first | 
|  | * INDEX position, and WRITE to the last (READ - 1 wrapped) | 
|  | * | 
|  | * When the firmware places a packet in a buffer it will advance the READ index | 
|  | * and fire the RX interrupt.  The driver can then query the READ index and | 
|  | * process as many packets as possible, moving the WRITE index forward as it | 
|  | * resets the Rx queue buffers with new memory. | 
|  | * | 
|  | * The management in the driver is as follows: | 
|  | * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When | 
|  | *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled | 
|  | *   to replensish the iwl->rxq->rx_free. | 
|  | * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the | 
|  | *   iwl->rxq is replenished and the READ INDEX is updated (updating the | 
|  | *   'processed' and 'read' driver indexes as well) | 
|  | * + A received packet is processed and handed to the kernel network stack, | 
|  | *   detached from the iwl->rxq.  The driver 'processed' index is updated. | 
|  | * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free | 
|  | *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ | 
|  | *   INDEX is not incremented and iwl->status(RX_STALLED) is set.  If there | 
|  | *   were enough free buffers and RX_STALLED is set it is cleared. | 
|  | * | 
|  | * | 
|  | * Driver sequence: | 
|  | * | 
|  | * iwl_rx_queue_alloc()       Allocates rx_free | 
|  | * iwl_rx_replenish()         Replenishes rx_free list from rx_used, and calls | 
|  | *                            iwl_rx_queue_restock | 
|  | * iwl_rx_queue_restock()     Moves available buffers from rx_free into Rx | 
|  | *                            queue, updates firmware pointers, and updates | 
|  | *                            the WRITE index.  If insufficient rx_free buffers | 
|  | *                            are available, schedules iwl_rx_replenish | 
|  | * | 
|  | * -- enable interrupts -- | 
|  | * ISR - iwl_rx()             Detach iwl_rx_mem_buffers from pool up to the | 
|  | *                            READ INDEX, detaching the SKB from the pool. | 
|  | *                            Moves the packet buffer from queue to rx_used. | 
|  | *                            Calls iwl_rx_queue_restock to refill any empty | 
|  | *                            slots. | 
|  | * ... | 
|  | * | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * iwl_rx_queue_space - Return number of free slots available in queue. | 
|  | */ | 
|  | static int iwl_rx_queue_space(const struct iwl_rx_queue *q) | 
|  | { | 
|  | int s = q->read - q->write; | 
|  | if (s <= 0) | 
|  | s += RX_QUEUE_SIZE; | 
|  | /* keep some buffer to not confuse full and empty queue */ | 
|  | s -= 2; | 
|  | if (s < 0) | 
|  | s = 0; | 
|  | return s; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue | 
|  | * | 
|  | * NOTE: This function has 3945 and 4965 specific code sections | 
|  | * but is declared in base due to the majority of the | 
|  | * implementation being the same (only a numeric constant is | 
|  | * different) | 
|  | * | 
|  | */ | 
|  | int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) | 
|  | { | 
|  | u32 reg = 0; | 
|  | int rc = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&q->lock, flags); | 
|  |  | 
|  | if (q->need_update == 0) | 
|  | goto exit_unlock; | 
|  |  | 
|  | if (test_bit(STATUS_POWER_PMI, &priv->status)) { | 
|  | reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); | 
|  |  | 
|  | if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { | 
|  | iwl_set_bit(priv, CSR_GP_CNTRL, | 
|  | CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); | 
|  | goto exit_unlock; | 
|  | } | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) | 
|  | goto exit_unlock; | 
|  |  | 
|  | iwl_write_restricted(priv, FH_RSCSR_CHNL0_WPTR, | 
|  | q->write & ~0x7); | 
|  | iwl_release_restricted_access(priv); | 
|  | } else | 
|  | iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7); | 
|  |  | 
|  |  | 
|  | q->need_update = 0; | 
|  |  | 
|  | exit_unlock: | 
|  | spin_unlock_irqrestore(&q->lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer pointer. | 
|  | * | 
|  | * NOTE: This function has 3945 and 4965 specific code paths in it. | 
|  | */ | 
|  | static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv, | 
|  | dma_addr_t dma_addr) | 
|  | { | 
|  | return cpu_to_le32((u32)(dma_addr >> 8)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * iwl_rx_queue_restock - refill RX queue from pre-allocated pool | 
|  | * | 
|  | * If there are slots in the RX queue that  need to be restocked, | 
|  | * and we have free pre-allocated buffers, fill the ranks as much | 
|  | * as we can pulling from rx_free. | 
|  | * | 
|  | * This moves the 'write' index forward to catch up with 'processed', and | 
|  | * also updates the memory address in the firmware to reference the new | 
|  | * target buffer. | 
|  | */ | 
|  | int iwl_rx_queue_restock(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rx_queue *rxq = &priv->rxq; | 
|  | struct list_head *element; | 
|  | struct iwl_rx_mem_buffer *rxb; | 
|  | unsigned long flags; | 
|  | int write, rc; | 
|  |  | 
|  | spin_lock_irqsave(&rxq->lock, flags); | 
|  | write = rxq->write & ~0x7; | 
|  | while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { | 
|  | element = rxq->rx_free.next; | 
|  | rxb = list_entry(element, struct iwl_rx_mem_buffer, list); | 
|  | list_del(element); | 
|  | rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); | 
|  | rxq->queue[rxq->write] = rxb; | 
|  | rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; | 
|  | rxq->free_count--; | 
|  | } | 
|  | spin_unlock_irqrestore(&rxq->lock, flags); | 
|  | /* If the pre-allocated buffer pool is dropping low, schedule to | 
|  | * refill it */ | 
|  | if (rxq->free_count <= RX_LOW_WATERMARK) | 
|  | queue_work(priv->workqueue, &priv->rx_replenish); | 
|  |  | 
|  |  | 
|  | /* If we've added more space for the firmware to place data, tell it */ | 
|  | if ((write != (rxq->write & ~0x7)) | 
|  | || (abs(rxq->write - rxq->read) > 7)) { | 
|  | spin_lock_irqsave(&rxq->lock, flags); | 
|  | rxq->need_update = 1; | 
|  | spin_unlock_irqrestore(&rxq->lock, flags); | 
|  | rc = iwl_rx_queue_update_write_ptr(priv, rxq); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_rx_replensih - Move all used packet from rx_used to rx_free | 
|  | * | 
|  | * When moving to rx_free an SKB is allocated for the slot. | 
|  | * | 
|  | * Also restock the Rx queue via iwl_rx_queue_restock. | 
|  | * This is called as a scheduled work item (except for during intialization) | 
|  | */ | 
|  | void iwl_rx_replenish(void *data) | 
|  | { | 
|  | struct iwl_priv *priv = data; | 
|  | struct iwl_rx_queue *rxq = &priv->rxq; | 
|  | struct list_head *element; | 
|  | struct iwl_rx_mem_buffer *rxb; | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&rxq->lock, flags); | 
|  | while (!list_empty(&rxq->rx_used)) { | 
|  | element = rxq->rx_used.next; | 
|  | rxb = list_entry(element, struct iwl_rx_mem_buffer, list); | 
|  | rxb->skb = | 
|  | alloc_skb(IWL_RX_BUF_SIZE, __GFP_NOWARN | GFP_ATOMIC); | 
|  | if (!rxb->skb) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_CRIT DRV_NAME | 
|  | ": Can not allocate SKB buffers\n"); | 
|  | /* We don't reschedule replenish work here -- we will | 
|  | * call the restock method and if it still needs | 
|  | * more buffers it will schedule replenish */ | 
|  | break; | 
|  | } | 
|  | priv->alloc_rxb_skb++; | 
|  | list_del(element); | 
|  | rxb->dma_addr = | 
|  | pci_map_single(priv->pci_dev, rxb->skb->data, | 
|  | IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); | 
|  | list_add_tail(&rxb->list, &rxq->rx_free); | 
|  | rxq->free_count++; | 
|  | } | 
|  | spin_unlock_irqrestore(&rxq->lock, flags); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_rx_queue_restock(priv); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | /* Assumes that the skb field of the buffers in 'pool' is kept accurate. | 
|  | * If an SKB has been detached, the POOL needs to have it's SKB set to NULL | 
|  | * This free routine walks the list of POOL entries and if SKB is set to | 
|  | * non NULL it is unmapped and freed | 
|  | */ | 
|  | void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { | 
|  | if (rxq->pool[i].skb != NULL) { | 
|  | pci_unmap_single(priv->pci_dev, | 
|  | rxq->pool[i].dma_addr, | 
|  | IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); | 
|  | dev_kfree_skb(rxq->pool[i].skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, | 
|  | rxq->dma_addr); | 
|  | rxq->bd = NULL; | 
|  | } | 
|  |  | 
|  | int iwl_rx_queue_alloc(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rx_queue *rxq = &priv->rxq; | 
|  | struct pci_dev *dev = priv->pci_dev; | 
|  | int i; | 
|  |  | 
|  | spin_lock_init(&rxq->lock); | 
|  | INIT_LIST_HEAD(&rxq->rx_free); | 
|  | INIT_LIST_HEAD(&rxq->rx_used); | 
|  | rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr); | 
|  | if (!rxq->bd) | 
|  | return -ENOMEM; | 
|  | /* Fill the rx_used queue with _all_ of the Rx buffers */ | 
|  | for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) | 
|  | list_add_tail(&rxq->pool[i].list, &rxq->rx_used); | 
|  | /* Set us so that we have processed and used all buffers, but have | 
|  | * not restocked the Rx queue with fresh buffers */ | 
|  | rxq->read = rxq->write = 0; | 
|  | rxq->free_count = 0; | 
|  | rxq->need_update = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) | 
|  | { | 
|  | unsigned long flags; | 
|  | int i; | 
|  | spin_lock_irqsave(&rxq->lock, flags); | 
|  | INIT_LIST_HEAD(&rxq->rx_free); | 
|  | INIT_LIST_HEAD(&rxq->rx_used); | 
|  | /* Fill the rx_used queue with _all_ of the Rx buffers */ | 
|  | for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { | 
|  | /* In the reset function, these buffers may have been allocated | 
|  | * to an SKB, so we need to unmap and free potential storage */ | 
|  | if (rxq->pool[i].skb != NULL) { | 
|  | pci_unmap_single(priv->pci_dev, | 
|  | rxq->pool[i].dma_addr, | 
|  | IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); | 
|  | priv->alloc_rxb_skb--; | 
|  | dev_kfree_skb(rxq->pool[i].skb); | 
|  | rxq->pool[i].skb = NULL; | 
|  | } | 
|  | list_add_tail(&rxq->pool[i].list, &rxq->rx_used); | 
|  | } | 
|  |  | 
|  | /* Set us so that we have processed and used all buffers, but have | 
|  | * not restocked the Rx queue with fresh buffers */ | 
|  | rxq->read = rxq->write = 0; | 
|  | rxq->free_count = 0; | 
|  | spin_unlock_irqrestore(&rxq->lock, flags); | 
|  | } | 
|  |  | 
|  | /* Convert linear signal-to-noise ratio into dB */ | 
|  | static u8 ratio2dB[100] = { | 
|  | /*	 0   1   2   3   4   5   6   7   8   9 */ | 
|  | 0,  0,  6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ | 
|  | 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ | 
|  | 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ | 
|  | 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ | 
|  | 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ | 
|  | 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ | 
|  | 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ | 
|  | 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ | 
|  | 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ | 
|  | 39, 39, 39, 39, 39, 40, 40, 40, 40, 40  /* 90 - 99 */ | 
|  | }; | 
|  |  | 
|  | /* Calculates a relative dB value from a ratio of linear | 
|  | *   (i.e. not dB) signal levels. | 
|  | * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ | 
|  | int iwl_calc_db_from_ratio(int sig_ratio) | 
|  | { | 
|  | /* 1000:1 or higher just report as 60 dB */ | 
|  | if (sig_ratio >= 1000) | 
|  | return 60; | 
|  |  | 
|  | /* 100:1 or higher, divide by 10 and use table, | 
|  | *   add 20 dB to make up for divide by 10 */ | 
|  | if (sig_ratio >= 100) | 
|  | return (20 + (int)ratio2dB[sig_ratio/10]); | 
|  |  | 
|  | /* We shouldn't see this */ | 
|  | if (sig_ratio < 1) | 
|  | return 0; | 
|  |  | 
|  | /* Use table for ratios 1:1 - 99:1 */ | 
|  | return (int)ratio2dB[sig_ratio]; | 
|  | } | 
|  |  | 
|  | #define PERFECT_RSSI (-20) /* dBm */ | 
|  | #define WORST_RSSI (-95)   /* dBm */ | 
|  | #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) | 
|  |  | 
|  | /* Calculate an indication of rx signal quality (a percentage, not dBm!). | 
|  | * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info | 
|  | *   about formulas used below. */ | 
|  | int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) | 
|  | { | 
|  | int sig_qual; | 
|  | int degradation = PERFECT_RSSI - rssi_dbm; | 
|  |  | 
|  | /* If we get a noise measurement, use signal-to-noise ratio (SNR) | 
|  | * as indicator; formula is (signal dbm - noise dbm). | 
|  | * SNR at or above 40 is a great signal (100%). | 
|  | * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. | 
|  | * Weakest usable signal is usually 10 - 15 dB SNR. */ | 
|  | if (noise_dbm) { | 
|  | if (rssi_dbm - noise_dbm >= 40) | 
|  | return 100; | 
|  | else if (rssi_dbm < noise_dbm) | 
|  | return 0; | 
|  | sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; | 
|  |  | 
|  | /* Else use just the signal level. | 
|  | * This formula is a least squares fit of data points collected and | 
|  | *   compared with a reference system that had a percentage (%) display | 
|  | *   for signal quality. */ | 
|  | } else | 
|  | sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * | 
|  | (15 * RSSI_RANGE + 62 * degradation)) / | 
|  | (RSSI_RANGE * RSSI_RANGE); | 
|  |  | 
|  | if (sig_qual > 100) | 
|  | sig_qual = 100; | 
|  | else if (sig_qual < 1) | 
|  | sig_qual = 0; | 
|  |  | 
|  | return sig_qual; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_rx_handle - Main entry function for receiving responses from the uCode | 
|  | * | 
|  | * Uses the priv->rx_handlers callback function array to invoke | 
|  | * the appropriate handlers, including command responses, | 
|  | * frame-received notifications, and other notifications. | 
|  | */ | 
|  | static void iwl_rx_handle(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rx_mem_buffer *rxb; | 
|  | struct iwl_rx_packet *pkt; | 
|  | struct iwl_rx_queue *rxq = &priv->rxq; | 
|  | u32 r, i; | 
|  | int reclaim; | 
|  | unsigned long flags; | 
|  |  | 
|  | r = iwl_hw_get_rx_read(priv); | 
|  | i = rxq->read; | 
|  |  | 
|  | /* Rx interrupt, but nothing sent from uCode */ | 
|  | if (i == r) | 
|  | IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i); | 
|  |  | 
|  | while (i != r) { | 
|  | rxb = rxq->queue[i]; | 
|  |  | 
|  | /* If an RXB doesn't have a queue slot associated with it | 
|  | * then a bug has been introduced in the queue refilling | 
|  | * routines -- catch it here */ | 
|  | BUG_ON(rxb == NULL); | 
|  |  | 
|  | rxq->queue[i] = NULL; | 
|  |  | 
|  | pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, | 
|  | IWL_RX_BUF_SIZE, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
|  |  | 
|  | /* Reclaim a command buffer only if this packet is a response | 
|  | *   to a (driver-originated) command. | 
|  | * If the packet (e.g. Rx frame) originated from uCode, | 
|  | *   there is no command buffer to reclaim. | 
|  | * Ucode should set SEQ_RX_FRAME bit if ucode-originated, | 
|  | *   but apparently a few don't get set; catch them here. */ | 
|  | reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && | 
|  | (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && | 
|  | (pkt->hdr.cmd != REPLY_4965_RX) && | 
|  | (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && | 
|  | (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && | 
|  | (pkt->hdr.cmd != REPLY_TX); | 
|  |  | 
|  | /* Based on type of command response or notification, | 
|  | *   handle those that need handling via function in | 
|  | *   rx_handlers table.  See iwl_setup_rx_handlers() */ | 
|  | if (priv->rx_handlers[pkt->hdr.cmd]) { | 
|  | IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR, | 
|  | "r = %d, i = %d, %s, 0x%02x\n", r, i, | 
|  | get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); | 
|  | priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); | 
|  | } else { | 
|  | /* No handling needed */ | 
|  | IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR, | 
|  | "r %d i %d No handler needed for %s, 0x%02x\n", | 
|  | r, i, get_cmd_string(pkt->hdr.cmd), | 
|  | pkt->hdr.cmd); | 
|  | } | 
|  |  | 
|  | if (reclaim) { | 
|  | /* Invoke any callbacks, transfer the skb to caller, | 
|  | * and fire off the (possibly) blocking iwl_send_cmd() | 
|  | * as we reclaim the driver command queue */ | 
|  | if (rxb && rxb->skb) | 
|  | iwl_tx_cmd_complete(priv, rxb); | 
|  | else | 
|  | IWL_WARNING("Claim null rxb?\n"); | 
|  | } | 
|  |  | 
|  | /* For now we just don't re-use anything.  We can tweak this | 
|  | * later to try and re-use notification packets and SKBs that | 
|  | * fail to Rx correctly */ | 
|  | if (rxb->skb != NULL) { | 
|  | priv->alloc_rxb_skb--; | 
|  | dev_kfree_skb_any(rxb->skb); | 
|  | rxb->skb = NULL; | 
|  | } | 
|  |  | 
|  | pci_unmap_single(priv->pci_dev, rxb->dma_addr, | 
|  | IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); | 
|  | spin_lock_irqsave(&rxq->lock, flags); | 
|  | list_add_tail(&rxb->list, &priv->rxq.rx_used); | 
|  | spin_unlock_irqrestore(&rxq->lock, flags); | 
|  | i = (i + 1) & RX_QUEUE_MASK; | 
|  | } | 
|  |  | 
|  | /* Backtrack one entry */ | 
|  | priv->rxq.read = i; | 
|  | iwl_rx_queue_restock(priv); | 
|  | } | 
|  |  | 
|  | int iwl_tx_queue_update_write_ptr(struct iwl_priv *priv, | 
|  | struct iwl_tx_queue *txq) | 
|  | { | 
|  | u32 reg = 0; | 
|  | int rc = 0; | 
|  | int txq_id = txq->q.id; | 
|  |  | 
|  | if (txq->need_update == 0) | 
|  | return rc; | 
|  |  | 
|  | /* if we're trying to save power */ | 
|  | if (test_bit(STATUS_POWER_PMI, &priv->status)) { | 
|  | /* wake up nic if it's powered down ... | 
|  | * uCode will wake up, and interrupt us again, so next | 
|  | * time we'll skip this part. */ | 
|  | reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); | 
|  |  | 
|  | if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { | 
|  | IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg); | 
|  | iwl_set_bit(priv, CSR_GP_CNTRL, | 
|  | CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* restore this queue's parameters in nic hardware. */ | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) | 
|  | return rc; | 
|  | iwl_write_restricted(priv, HBUS_TARG_WRPTR, | 
|  | txq->q.first_empty | (txq_id << 8)); | 
|  | iwl_release_restricted_access(priv); | 
|  |  | 
|  | /* else not in power-save mode, uCode will never sleep when we're | 
|  | * trying to tx (during RFKILL, we're not trying to tx). */ | 
|  | } else | 
|  | iwl_write32(priv, HBUS_TARG_WRPTR, | 
|  | txq->q.first_empty | (txq_id << 8)); | 
|  |  | 
|  | txq->need_update = 0; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | static void iwl_print_rx_config_cmd(struct iwl_rxon_cmd *rxon) | 
|  | { | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | IWL_DEBUG_RADIO("RX CONFIG:\n"); | 
|  | iwl_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); | 
|  | IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); | 
|  | IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); | 
|  | IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n", | 
|  | le32_to_cpu(rxon->filter_flags)); | 
|  | IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); | 
|  | IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n", | 
|  | rxon->ofdm_basic_rates); | 
|  | IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); | 
|  | IWL_DEBUG_RADIO("u8[6] node_addr: %s\n", | 
|  | print_mac(mac, rxon->node_addr)); | 
|  | IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n", | 
|  | print_mac(mac, rxon->bssid_addr)); | 
|  | IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwl_enable_interrupts(struct iwl_priv *priv) | 
|  | { | 
|  | IWL_DEBUG_ISR("Enabling interrupts\n"); | 
|  | set_bit(STATUS_INT_ENABLED, &priv->status); | 
|  | iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK); | 
|  | } | 
|  |  | 
|  | static inline void iwl_disable_interrupts(struct iwl_priv *priv) | 
|  | { | 
|  | clear_bit(STATUS_INT_ENABLED, &priv->status); | 
|  |  | 
|  | /* disable interrupts from uCode/NIC to host */ | 
|  | iwl_write32(priv, CSR_INT_MASK, 0x00000000); | 
|  |  | 
|  | /* acknowledge/clear/reset any interrupts still pending | 
|  | * from uCode or flow handler (Rx/Tx DMA) */ | 
|  | iwl_write32(priv, CSR_INT, 0xffffffff); | 
|  | iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff); | 
|  | IWL_DEBUG_ISR("Disabled interrupts\n"); | 
|  | } | 
|  |  | 
|  | static const char *desc_lookup(int i) | 
|  | { | 
|  | switch (i) { | 
|  | case 1: | 
|  | return "FAIL"; | 
|  | case 2: | 
|  | return "BAD_PARAM"; | 
|  | case 3: | 
|  | return "BAD_CHECKSUM"; | 
|  | case 4: | 
|  | return "NMI_INTERRUPT"; | 
|  | case 5: | 
|  | return "SYSASSERT"; | 
|  | case 6: | 
|  | return "FATAL_ERROR"; | 
|  | } | 
|  |  | 
|  | return "UNKNOWN"; | 
|  | } | 
|  |  | 
|  | #define ERROR_START_OFFSET  (1 * sizeof(u32)) | 
|  | #define ERROR_ELEM_SIZE     (7 * sizeof(u32)) | 
|  |  | 
|  | static void iwl_dump_nic_error_log(struct iwl_priv *priv) | 
|  | { | 
|  | u32 data2, line; | 
|  | u32 desc, time, count, base, data1; | 
|  | u32 blink1, blink2, ilink1, ilink2; | 
|  | int rc; | 
|  |  | 
|  | base = le32_to_cpu(priv->card_alive.error_event_table_ptr); | 
|  |  | 
|  | if (!iwl_hw_valid_rtc_data_addr(base)) { | 
|  | IWL_ERROR("Not valid error log pointer 0x%08X\n", base); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) { | 
|  | IWL_WARNING("Can not read from adapter at this time.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | count = iwl_read_restricted_mem(priv, base); | 
|  |  | 
|  | if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { | 
|  | IWL_ERROR("Start IWL Error Log Dump:\n"); | 
|  | IWL_ERROR("Status: 0x%08lX, Config: %08X count: %d\n", | 
|  | priv->status, priv->config, count); | 
|  | } | 
|  |  | 
|  | desc = iwl_read_restricted_mem(priv, base + 1 * sizeof(u32)); | 
|  | blink1 = iwl_read_restricted_mem(priv, base + 3 * sizeof(u32)); | 
|  | blink2 = iwl_read_restricted_mem(priv, base + 4 * sizeof(u32)); | 
|  | ilink1 = iwl_read_restricted_mem(priv, base + 5 * sizeof(u32)); | 
|  | ilink2 = iwl_read_restricted_mem(priv, base + 6 * sizeof(u32)); | 
|  | data1 = iwl_read_restricted_mem(priv, base + 7 * sizeof(u32)); | 
|  | data2 = iwl_read_restricted_mem(priv, base + 8 * sizeof(u32)); | 
|  | line = iwl_read_restricted_mem(priv, base + 9 * sizeof(u32)); | 
|  | time = iwl_read_restricted_mem(priv, base + 11 * sizeof(u32)); | 
|  |  | 
|  | IWL_ERROR("Desc               Time       " | 
|  | "data1      data2      line\n"); | 
|  | IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n", | 
|  | desc_lookup(desc), desc, time, data1, data2, line); | 
|  | IWL_ERROR("blink1  blink2  ilink1  ilink2\n"); | 
|  | IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, | 
|  | ilink1, ilink2); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  |  | 
|  | #define EVENT_START_OFFSET  (4 * sizeof(u32)) | 
|  |  | 
|  | /** | 
|  | * iwl_print_event_log - Dump error event log to syslog | 
|  | * | 
|  | * NOTE: Must be called with iwl_grab_restricted_access() already obtained! | 
|  | */ | 
|  | static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, | 
|  | u32 num_events, u32 mode) | 
|  | { | 
|  | u32 i; | 
|  | u32 base;       /* SRAM byte address of event log header */ | 
|  | u32 event_size;	/* 2 u32s, or 3 u32s if timestamp recorded */ | 
|  | u32 ptr;        /* SRAM byte address of log data */ | 
|  | u32 ev, time, data; /* event log data */ | 
|  |  | 
|  | if (num_events == 0) | 
|  | return; | 
|  |  | 
|  | base = le32_to_cpu(priv->card_alive.log_event_table_ptr); | 
|  |  | 
|  | if (mode == 0) | 
|  | event_size = 2 * sizeof(u32); | 
|  | else | 
|  | event_size = 3 * sizeof(u32); | 
|  |  | 
|  | ptr = base + EVENT_START_OFFSET + (start_idx * event_size); | 
|  |  | 
|  | /* "time" is actually "data" for mode 0 (no timestamp). | 
|  | * place event id # at far right for easier visual parsing. */ | 
|  | for (i = 0; i < num_events; i++) { | 
|  | ev = iwl_read_restricted_mem(priv, ptr); | 
|  | ptr += sizeof(u32); | 
|  | time = iwl_read_restricted_mem(priv, ptr); | 
|  | ptr += sizeof(u32); | 
|  | if (mode == 0) | 
|  | IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */ | 
|  | else { | 
|  | data = iwl_read_restricted_mem(priv, ptr); | 
|  | ptr += sizeof(u32); | 
|  | IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_dump_nic_event_log(struct iwl_priv *priv) | 
|  | { | 
|  | int rc; | 
|  | u32 base;       /* SRAM byte address of event log header */ | 
|  | u32 capacity;   /* event log capacity in # entries */ | 
|  | u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */ | 
|  | u32 num_wraps;  /* # times uCode wrapped to top of log */ | 
|  | u32 next_entry; /* index of next entry to be written by uCode */ | 
|  | u32 size;       /* # entries that we'll print */ | 
|  |  | 
|  | base = le32_to_cpu(priv->card_alive.log_event_table_ptr); | 
|  | if (!iwl_hw_valid_rtc_data_addr(base)) { | 
|  | IWL_ERROR("Invalid event log pointer 0x%08X\n", base); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) { | 
|  | IWL_WARNING("Can not read from adapter at this time.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* event log header */ | 
|  | capacity = iwl_read_restricted_mem(priv, base); | 
|  | mode = iwl_read_restricted_mem(priv, base + (1 * sizeof(u32))); | 
|  | num_wraps = iwl_read_restricted_mem(priv, base + (2 * sizeof(u32))); | 
|  | next_entry = iwl_read_restricted_mem(priv, base + (3 * sizeof(u32))); | 
|  |  | 
|  | size = num_wraps ? capacity : next_entry; | 
|  |  | 
|  | /* bail out if nothing in log */ | 
|  | if (size == 0) { | 
|  | IWL_ERROR("Start IWL Event Log Dump: nothing in log\n"); | 
|  | iwl_release_restricted_access(priv); | 
|  | return; | 
|  | } | 
|  |  | 
|  | IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n", | 
|  | size, num_wraps); | 
|  |  | 
|  | /* if uCode has wrapped back to top of log, start at the oldest entry, | 
|  | * i.e the next one that uCode would fill. */ | 
|  | if (num_wraps) | 
|  | iwl_print_event_log(priv, next_entry, | 
|  | capacity - next_entry, mode); | 
|  |  | 
|  | /* (then/else) start at top of log */ | 
|  | iwl_print_event_log(priv, 0, next_entry, mode); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_irq_handle_error - called for HW or SW error interrupt from card | 
|  | */ | 
|  | static void iwl_irq_handle_error(struct iwl_priv *priv) | 
|  | { | 
|  | /* Set the FW error flag -- cleared on iwl_down */ | 
|  | set_bit(STATUS_FW_ERROR, &priv->status); | 
|  |  | 
|  | /* Cancel currently queued command. */ | 
|  | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (iwl_debug_level & IWL_DL_FW_ERRORS) { | 
|  | iwl_dump_nic_error_log(priv); | 
|  | iwl_dump_nic_event_log(priv); | 
|  | iwl_print_rx_config_cmd(&priv->staging_rxon); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | wake_up_interruptible(&priv->wait_command_queue); | 
|  |  | 
|  | /* Keep the restart process from trying to send host | 
|  | * commands by clearing the INIT status bit */ | 
|  | clear_bit(STATUS_READY, &priv->status); | 
|  |  | 
|  | if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS, | 
|  | "Restarting adapter due to uCode error.\n"); | 
|  |  | 
|  | if (iwl_is_associated(priv)) { | 
|  | memcpy(&priv->recovery_rxon, &priv->active_rxon, | 
|  | sizeof(priv->recovery_rxon)); | 
|  | priv->error_recovering = 1; | 
|  | } | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_error_recovery(struct iwl_priv *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | memcpy(&priv->staging_rxon, &priv->recovery_rxon, | 
|  | sizeof(priv->staging_rxon)); | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | iwl_rxon_add_station(priv, priv->bssid, 1); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id); | 
|  | priv->error_recovering = 0; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | static void iwl_irq_tasklet(struct iwl_priv *priv) | 
|  | { | 
|  | u32 inta, handled = 0; | 
|  | u32 inta_fh; | 
|  | unsigned long flags; | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | u32 inta_mask; | 
|  | #endif | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | /* Ack/clear/reset pending uCode interrupts. | 
|  | * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, | 
|  | *  and will clear only when CSR_FH_INT_STATUS gets cleared. */ | 
|  | inta = iwl_read32(priv, CSR_INT); | 
|  | iwl_write32(priv, CSR_INT, inta); | 
|  |  | 
|  | /* Ack/clear/reset pending flow-handler (DMA) interrupts. | 
|  | * Any new interrupts that happen after this, either while we're | 
|  | * in this tasklet, or later, will show up in next ISR/tasklet. */ | 
|  | inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | 
|  | iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (iwl_debug_level & IWL_DL_ISR) { | 
|  | inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ | 
|  | IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", | 
|  | inta, inta_mask, inta_fh); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not | 
|  | * atomic, make sure that inta covers all the interrupts that | 
|  | * we've discovered, even if FH interrupt came in just after | 
|  | * reading CSR_INT. */ | 
|  | if (inta_fh & CSR_FH_INT_RX_MASK) | 
|  | inta |= CSR_INT_BIT_FH_RX; | 
|  | if (inta_fh & CSR_FH_INT_TX_MASK) | 
|  | inta |= CSR_INT_BIT_FH_TX; | 
|  |  | 
|  | /* Now service all interrupt bits discovered above. */ | 
|  | if (inta & CSR_INT_BIT_HW_ERR) { | 
|  | IWL_ERROR("Microcode HW error detected.  Restarting.\n"); | 
|  |  | 
|  | /* Tell the device to stop sending interrupts */ | 
|  | iwl_disable_interrupts(priv); | 
|  |  | 
|  | iwl_irq_handle_error(priv); | 
|  |  | 
|  | handled |= CSR_INT_BIT_HW_ERR; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (iwl_debug_level & (IWL_DL_ISR)) { | 
|  | /* NIC fires this, but we don't use it, redundant with WAKEUP */ | 
|  | if (inta & CSR_INT_BIT_MAC_CLK_ACTV) | 
|  | IWL_DEBUG_ISR("Microcode started or stopped.\n"); | 
|  |  | 
|  | /* Alive notification via Rx interrupt will do the real work */ | 
|  | if (inta & CSR_INT_BIT_ALIVE) | 
|  | IWL_DEBUG_ISR("Alive interrupt\n"); | 
|  | } | 
|  | #endif | 
|  | /* Safely ignore these bits for debug checks below */ | 
|  | inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE); | 
|  |  | 
|  | /* HW RF KILL switch toggled (4965 only) */ | 
|  | if (inta & CSR_INT_BIT_RF_KILL) { | 
|  | int hw_rf_kill = 0; | 
|  | if (!(iwl_read32(priv, CSR_GP_CNTRL) & | 
|  | CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) | 
|  | hw_rf_kill = 1; | 
|  |  | 
|  | IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR, | 
|  | "RF_KILL bit toggled to %s.\n", | 
|  | hw_rf_kill ? "disable radio":"enable radio"); | 
|  |  | 
|  | /* Queue restart only if RF_KILL switch was set to "kill" | 
|  | *   when we loaded driver, and is now set to "enable". | 
|  | * After we're Alive, RF_KILL gets handled by | 
|  | *   iwl_rx_card_state_notif() */ | 
|  | if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { | 
|  | clear_bit(STATUS_RF_KILL_HW, &priv->status); | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  |  | 
|  | handled |= CSR_INT_BIT_RF_KILL; | 
|  | } | 
|  |  | 
|  | /* Chip got too hot and stopped itself (4965 only) */ | 
|  | if (inta & CSR_INT_BIT_CT_KILL) { | 
|  | IWL_ERROR("Microcode CT kill error detected.\n"); | 
|  | handled |= CSR_INT_BIT_CT_KILL; | 
|  | } | 
|  |  | 
|  | /* Error detected by uCode */ | 
|  | if (inta & CSR_INT_BIT_SW_ERR) { | 
|  | IWL_ERROR("Microcode SW error detected.  Restarting 0x%X.\n", | 
|  | inta); | 
|  | iwl_irq_handle_error(priv); | 
|  | handled |= CSR_INT_BIT_SW_ERR; | 
|  | } | 
|  |  | 
|  | /* uCode wakes up after power-down sleep */ | 
|  | if (inta & CSR_INT_BIT_WAKEUP) { | 
|  | IWL_DEBUG_ISR("Wakeup interrupt\n"); | 
|  | iwl_rx_queue_update_write_ptr(priv, &priv->rxq); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[0]); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[1]); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[2]); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[3]); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[4]); | 
|  | iwl_tx_queue_update_write_ptr(priv, &priv->txq[5]); | 
|  |  | 
|  | handled |= CSR_INT_BIT_WAKEUP; | 
|  | } | 
|  |  | 
|  | /* All uCode command responses, including Tx command responses, | 
|  | * Rx "responses" (frame-received notification), and other | 
|  | * notifications from uCode come through here*/ | 
|  | if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { | 
|  | iwl_rx_handle(priv); | 
|  | handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); | 
|  | } | 
|  |  | 
|  | if (inta & CSR_INT_BIT_FH_TX) { | 
|  | IWL_DEBUG_ISR("Tx interrupt\n"); | 
|  | handled |= CSR_INT_BIT_FH_TX; | 
|  | } | 
|  |  | 
|  | if (inta & ~handled) | 
|  | IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); | 
|  |  | 
|  | if (inta & ~CSR_INI_SET_MASK) { | 
|  | IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", | 
|  | inta & ~CSR_INI_SET_MASK); | 
|  | IWL_WARNING("   with FH_INT = 0x%08x\n", inta_fh); | 
|  | } | 
|  |  | 
|  | /* Re-enable all interrupts */ | 
|  | iwl_enable_interrupts(priv); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (iwl_debug_level & (IWL_DL_ISR)) { | 
|  | inta = iwl_read32(priv, CSR_INT); | 
|  | inta_mask = iwl_read32(priv, CSR_INT_MASK); | 
|  | inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | 
|  | IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " | 
|  | "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); | 
|  | } | 
|  | #endif | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | static irqreturn_t iwl_isr(int irq, void *data) | 
|  | { | 
|  | struct iwl_priv *priv = data; | 
|  | u32 inta, inta_mask; | 
|  | u32 inta_fh; | 
|  | if (!priv) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | spin_lock(&priv->lock); | 
|  |  | 
|  | /* Disable (but don't clear!) interrupts here to avoid | 
|  | *    back-to-back ISRs and sporadic interrupts from our NIC. | 
|  | * If we have something to service, the tasklet will re-enable ints. | 
|  | * If we *don't* have something, we'll re-enable before leaving here. */ | 
|  | inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */ | 
|  | iwl_write32(priv, CSR_INT_MASK, 0x00000000); | 
|  |  | 
|  | /* Discover which interrupts are active/pending */ | 
|  | inta = iwl_read32(priv, CSR_INT); | 
|  | inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | 
|  |  | 
|  | /* Ignore interrupt if there's nothing in NIC to service. | 
|  | * This may be due to IRQ shared with another device, | 
|  | * or due to sporadic interrupts thrown from our NIC. */ | 
|  | if (!inta && !inta_fh) { | 
|  | IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); | 
|  | goto none; | 
|  | } | 
|  |  | 
|  | if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { | 
|  | /* Hardware disappeared. It might have already raised | 
|  | * an interrupt */ | 
|  | IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta); | 
|  | goto unplugged; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", | 
|  | inta, inta_mask, inta_fh); | 
|  |  | 
|  | /* iwl_irq_tasklet() will service interrupts and re-enable them */ | 
|  | tasklet_schedule(&priv->irq_tasklet); | 
|  |  | 
|  | unplugged: | 
|  | spin_unlock(&priv->lock); | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | none: | 
|  | /* re-enable interrupts here since we don't have anything to service. */ | 
|  | iwl_enable_interrupts(priv); | 
|  | spin_unlock(&priv->lock); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | /************************** EEPROM BANDS **************************** | 
|  | * | 
|  | * The iwl_eeprom_band definitions below provide the mapping from the | 
|  | * EEPROM contents to the specific channel number supported for each | 
|  | * band. | 
|  | * | 
|  | * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3 | 
|  | * definition below maps to physical channel 42 in the 5.2GHz spectrum. | 
|  | * The specific geography and calibration information for that channel | 
|  | * is contained in the eeprom map itself. | 
|  | * | 
|  | * During init, we copy the eeprom information and channel map | 
|  | * information into priv->channel_info_24/52 and priv->channel_map_24/52 | 
|  | * | 
|  | * channel_map_24/52 provides the index in the channel_info array for a | 
|  | * given channel.  We have to have two separate maps as there is channel | 
|  | * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and | 
|  | * band_2 | 
|  | * | 
|  | * A value of 0xff stored in the channel_map indicates that the channel | 
|  | * is not supported by the hardware at all. | 
|  | * | 
|  | * A value of 0xfe in the channel_map indicates that the channel is not | 
|  | * valid for Tx with the current hardware.  This means that | 
|  | * while the system can tune and receive on a given channel, it may not | 
|  | * be able to associate or transmit any frames on that | 
|  | * channel.  There is no corresponding channel information for that | 
|  | * entry. | 
|  | * | 
|  | *********************************************************************/ | 
|  |  | 
|  | /* 2.4 GHz */ | 
|  | static const u8 iwl_eeprom_band_1[14] = { | 
|  | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 | 
|  | }; | 
|  |  | 
|  | /* 5.2 GHz bands */ | 
|  | static const u8 iwl_eeprom_band_2[] = { | 
|  | 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 | 
|  | }; | 
|  |  | 
|  | static const u8 iwl_eeprom_band_3[] = {	/* 5205-5320MHz */ | 
|  | 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 | 
|  | }; | 
|  |  | 
|  | static const u8 iwl_eeprom_band_4[] = {	/* 5500-5700MHz */ | 
|  | 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 | 
|  | }; | 
|  |  | 
|  | static const u8 iwl_eeprom_band_5[] = {	/* 5725-5825MHz */ | 
|  | 145, 149, 153, 157, 161, 165 | 
|  | }; | 
|  |  | 
|  | static u8 iwl_eeprom_band_6[] = {       /* 2.4 FAT channel */ | 
|  | 1, 2, 3, 4, 5, 6, 7 | 
|  | }; | 
|  |  | 
|  | static u8 iwl_eeprom_band_7[] = {       /* 5.2 FAT channel */ | 
|  | 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 | 
|  | }; | 
|  |  | 
|  | static void iwl_init_band_reference(const struct iwl_priv *priv, int band, | 
|  | int *eeprom_ch_count, | 
|  | const struct iwl_eeprom_channel | 
|  | **eeprom_ch_info, | 
|  | const u8 **eeprom_ch_index) | 
|  | { | 
|  | switch (band) { | 
|  | case 1:		/* 2.4GHz band */ | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); | 
|  | *eeprom_ch_info = priv->eeprom.band_1_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_1; | 
|  | break; | 
|  | case 2:		/* 5.2GHz band */ | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); | 
|  | *eeprom_ch_info = priv->eeprom.band_2_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_2; | 
|  | break; | 
|  | case 3:		/* 5.2GHz band */ | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); | 
|  | *eeprom_ch_info = priv->eeprom.band_3_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_3; | 
|  | break; | 
|  | case 4:		/* 5.2GHz band */ | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); | 
|  | *eeprom_ch_info = priv->eeprom.band_4_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_4; | 
|  | break; | 
|  | case 5:		/* 5.2GHz band */ | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); | 
|  | *eeprom_ch_info = priv->eeprom.band_5_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_5; | 
|  | break; | 
|  | case 6: | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); | 
|  | *eeprom_ch_info = priv->eeprom.band_24_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_6; | 
|  | break; | 
|  | case 7: | 
|  | *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); | 
|  | *eeprom_ch_info = priv->eeprom.band_52_channels; | 
|  | *eeprom_ch_index = iwl_eeprom_band_7; | 
|  | break; | 
|  | default: | 
|  | BUG(); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv, | 
|  | int phymode, u16 channel) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | switch (phymode) { | 
|  | case MODE_IEEE80211A: | 
|  | for (i = 14; i < priv->channel_count; i++) { | 
|  | if (priv->channel_info[i].channel == channel) | 
|  | return &priv->channel_info[i]; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case MODE_IEEE80211B: | 
|  | case MODE_IEEE80211G: | 
|  | if (channel >= 1 && channel <= 14) | 
|  | return &priv->channel_info[channel - 1]; | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \ | 
|  | ? # x " " : "") | 
|  |  | 
|  | static int iwl_init_channel_map(struct iwl_priv *priv) | 
|  | { | 
|  | int eeprom_ch_count = 0; | 
|  | const u8 *eeprom_ch_index = NULL; | 
|  | const struct iwl_eeprom_channel *eeprom_ch_info = NULL; | 
|  | int band, ch; | 
|  | struct iwl_channel_info *ch_info; | 
|  |  | 
|  | if (priv->channel_count) { | 
|  | IWL_DEBUG_INFO("Channel map already initialized.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (priv->eeprom.version < 0x2f) { | 
|  | IWL_WARNING("Unsupported EEPROM version: 0x%04X\n", | 
|  | priv->eeprom.version); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n"); | 
|  |  | 
|  | priv->channel_count = | 
|  | ARRAY_SIZE(iwl_eeprom_band_1) + | 
|  | ARRAY_SIZE(iwl_eeprom_band_2) + | 
|  | ARRAY_SIZE(iwl_eeprom_band_3) + | 
|  | ARRAY_SIZE(iwl_eeprom_band_4) + | 
|  | ARRAY_SIZE(iwl_eeprom_band_5); | 
|  |  | 
|  | IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count); | 
|  |  | 
|  | priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) * | 
|  | priv->channel_count, GFP_KERNEL); | 
|  | if (!priv->channel_info) { | 
|  | IWL_ERROR("Could not allocate channel_info\n"); | 
|  | priv->channel_count = 0; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ch_info = priv->channel_info; | 
|  |  | 
|  | /* Loop through the 5 EEPROM bands adding them in order to the | 
|  | * channel map we maintain (that contains additional information than | 
|  | * what just in the EEPROM) */ | 
|  | for (band = 1; band <= 5; band++) { | 
|  |  | 
|  | iwl_init_band_reference(priv, band, &eeprom_ch_count, | 
|  | &eeprom_ch_info, &eeprom_ch_index); | 
|  |  | 
|  | /* Loop through each band adding each of the channels */ | 
|  | for (ch = 0; ch < eeprom_ch_count; ch++) { | 
|  | ch_info->channel = eeprom_ch_index[ch]; | 
|  | ch_info->phymode = (band == 1) ? MODE_IEEE80211B : | 
|  | MODE_IEEE80211A; | 
|  |  | 
|  | /* permanently store EEPROM's channel regulatory flags | 
|  | *   and max power in channel info database. */ | 
|  | ch_info->eeprom = eeprom_ch_info[ch]; | 
|  |  | 
|  | /* Copy the run-time flags so they are there even on | 
|  | * invalid channels */ | 
|  | ch_info->flags = eeprom_ch_info[ch].flags; | 
|  |  | 
|  | if (!(is_channel_valid(ch_info))) { | 
|  | IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - " | 
|  | "No traffic\n", | 
|  | ch_info->channel, | 
|  | ch_info->flags, | 
|  | is_channel_a_band(ch_info) ? | 
|  | "5.2" : "2.4"); | 
|  | ch_info++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Initialize regulatory-based run-time data */ | 
|  | ch_info->max_power_avg = ch_info->curr_txpow = | 
|  | eeprom_ch_info[ch].max_power_avg; | 
|  | ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; | 
|  | ch_info->min_power = 0; | 
|  |  | 
|  | IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" | 
|  | " %ddBm): Ad-Hoc %ssupported\n", | 
|  | ch_info->channel, | 
|  | is_channel_a_band(ch_info) ? | 
|  | "5.2" : "2.4", | 
|  | CHECK_AND_PRINT(IBSS), | 
|  | CHECK_AND_PRINT(ACTIVE), | 
|  | CHECK_AND_PRINT(RADAR), | 
|  | CHECK_AND_PRINT(WIDE), | 
|  | CHECK_AND_PRINT(NARROW), | 
|  | CHECK_AND_PRINT(DFS), | 
|  | eeprom_ch_info[ch].flags, | 
|  | eeprom_ch_info[ch].max_power_avg, | 
|  | ((eeprom_ch_info[ch]. | 
|  | flags & EEPROM_CHANNEL_IBSS) | 
|  | && !(eeprom_ch_info[ch]. | 
|  | flags & EEPROM_CHANNEL_RADAR)) | 
|  | ? "" : "not "); | 
|  |  | 
|  | /* Set the user_txpower_limit to the highest power | 
|  | * supported by any channel */ | 
|  | if (eeprom_ch_info[ch].max_power_avg > | 
|  | priv->user_txpower_limit) | 
|  | priv->user_txpower_limit = | 
|  | eeprom_ch_info[ch].max_power_avg; | 
|  |  | 
|  | ch_info++; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (band = 6; band <= 7; band++) { | 
|  | int phymode; | 
|  | u8 fat_extension_chan; | 
|  |  | 
|  | iwl_init_band_reference(priv, band, &eeprom_ch_count, | 
|  | &eeprom_ch_info, &eeprom_ch_index); | 
|  |  | 
|  | phymode = (band == 6) ? MODE_IEEE80211B : MODE_IEEE80211A; | 
|  | /* Loop through each band adding each of the channels */ | 
|  | for (ch = 0; ch < eeprom_ch_count; ch++) { | 
|  |  | 
|  | if ((band == 6) && | 
|  | ((eeprom_ch_index[ch] == 5) || | 
|  | (eeprom_ch_index[ch] == 6) || | 
|  | (eeprom_ch_index[ch] == 7))) | 
|  | fat_extension_chan = HT_IE_EXT_CHANNEL_MAX; | 
|  | else | 
|  | fat_extension_chan = HT_IE_EXT_CHANNEL_ABOVE; | 
|  |  | 
|  | iwl4965_set_fat_chan_info(priv, phymode, | 
|  | eeprom_ch_index[ch], | 
|  | &(eeprom_ch_info[ch]), | 
|  | fat_extension_chan); | 
|  |  | 
|  | iwl4965_set_fat_chan_info(priv, phymode, | 
|  | (eeprom_ch_index[ch] + 4), | 
|  | &(eeprom_ch_info[ch]), | 
|  | HT_IE_EXT_CHANNEL_BELOW); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after | 
|  | * sending probe req.  This should be set long enough to hear probe responses | 
|  | * from more than one AP.  */ | 
|  | #define IWL_ACTIVE_DWELL_TIME_24    (20)	/* all times in msec */ | 
|  | #define IWL_ACTIVE_DWELL_TIME_52    (10) | 
|  |  | 
|  | /* For faster active scanning, scan will move to the next channel if fewer than | 
|  | * PLCP_QUIET_THRESH packets are heard on this channel within | 
|  | * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell | 
|  | * time if it's a quiet channel (nothing responded to our probe, and there's | 
|  | * no other traffic). | 
|  | * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ | 
|  | #define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)	/* packets */ | 
|  | #define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(5)	/* msec */ | 
|  |  | 
|  | /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. | 
|  | * Must be set longer than active dwell time. | 
|  | * For the most reliable scan, set > AP beacon interval (typically 100msec). */ | 
|  | #define IWL_PASSIVE_DWELL_TIME_24   (20)	/* all times in msec */ | 
|  | #define IWL_PASSIVE_DWELL_TIME_52   (10) | 
|  | #define IWL_PASSIVE_DWELL_BASE      (100) | 
|  | #define IWL_CHANNEL_TUNE_TIME       5 | 
|  |  | 
|  | static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, int phymode) | 
|  | { | 
|  | if (phymode == MODE_IEEE80211A) | 
|  | return IWL_ACTIVE_DWELL_TIME_52; | 
|  | else | 
|  | return IWL_ACTIVE_DWELL_TIME_24; | 
|  | } | 
|  |  | 
|  | static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, int phymode) | 
|  | { | 
|  | u16 active = iwl_get_active_dwell_time(priv, phymode); | 
|  | u16 passive = (phymode != MODE_IEEE80211A) ? | 
|  | IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : | 
|  | IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; | 
|  |  | 
|  | if (iwl_is_associated(priv)) { | 
|  | /* If we're associated, we clamp the maximum passive | 
|  | * dwell time to be 98% of the beacon interval (minus | 
|  | * 2 * channel tune time) */ | 
|  | passive = priv->beacon_int; | 
|  | if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) | 
|  | passive = IWL_PASSIVE_DWELL_BASE; | 
|  | passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; | 
|  | } | 
|  |  | 
|  | if (passive <= active) | 
|  | passive = active + 1; | 
|  |  | 
|  | return passive; | 
|  | } | 
|  |  | 
|  | static int iwl_get_channels_for_scan(struct iwl_priv *priv, int phymode, | 
|  | u8 is_active, u8 direct_mask, | 
|  | struct iwl_scan_channel *scan_ch) | 
|  | { | 
|  | const struct ieee80211_channel *channels = NULL; | 
|  | const struct ieee80211_hw_mode *hw_mode; | 
|  | const struct iwl_channel_info *ch_info; | 
|  | u16 passive_dwell = 0; | 
|  | u16 active_dwell = 0; | 
|  | int added, i; | 
|  |  | 
|  | hw_mode = iwl_get_hw_mode(priv, phymode); | 
|  | if (!hw_mode) | 
|  | return 0; | 
|  |  | 
|  | channels = hw_mode->channels; | 
|  |  | 
|  | active_dwell = iwl_get_active_dwell_time(priv, phymode); | 
|  | passive_dwell = iwl_get_passive_dwell_time(priv, phymode); | 
|  |  | 
|  | for (i = 0, added = 0; i < hw_mode->num_channels; i++) { | 
|  | if (channels[i].chan == | 
|  | le16_to_cpu(priv->active_rxon.channel)) { | 
|  | if (iwl_is_associated(priv)) { | 
|  | IWL_DEBUG_SCAN | 
|  | ("Skipping current channel %d\n", | 
|  | le16_to_cpu(priv->active_rxon.channel)); | 
|  | continue; | 
|  | } | 
|  | } else if (priv->only_active_channel) | 
|  | continue; | 
|  |  | 
|  | scan_ch->channel = channels[i].chan; | 
|  |  | 
|  | ch_info = iwl_get_channel_info(priv, phymode, scan_ch->channel); | 
|  | if (!is_channel_valid(ch_info)) { | 
|  | IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", | 
|  | scan_ch->channel); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!is_active || is_channel_passive(ch_info) || | 
|  | !(channels[i].flag & IEEE80211_CHAN_W_ACTIVE_SCAN)) | 
|  | scan_ch->type = 0;	/* passive */ | 
|  | else | 
|  | scan_ch->type = 1;	/* active */ | 
|  |  | 
|  | if (scan_ch->type & 1) | 
|  | scan_ch->type |= (direct_mask << 1); | 
|  |  | 
|  | if (is_channel_narrow(ch_info)) | 
|  | scan_ch->type |= (1 << 7); | 
|  |  | 
|  | scan_ch->active_dwell = cpu_to_le16(active_dwell); | 
|  | scan_ch->passive_dwell = cpu_to_le16(passive_dwell); | 
|  |  | 
|  | /* Set power levels to defaults */ | 
|  | scan_ch->tpc.dsp_atten = 110; | 
|  | /* scan_pwr_info->tpc.dsp_atten; */ | 
|  |  | 
|  | /*scan_pwr_info->tpc.tx_gain; */ | 
|  | if (phymode == MODE_IEEE80211A) | 
|  | scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; | 
|  | else { | 
|  | scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); | 
|  | /* NOTE: if we were doing 6Mb OFDM for scans we'd use | 
|  | * power level | 
|  | scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3; | 
|  | */ | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_SCAN("Scanning %d [%s %d]\n", | 
|  | scan_ch->channel, | 
|  | (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", | 
|  | (scan_ch->type & 1) ? | 
|  | active_dwell : passive_dwell); | 
|  |  | 
|  | scan_ch++; | 
|  | added++; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_SCAN("total channels to scan %d \n", added); | 
|  | return added; | 
|  | } | 
|  |  | 
|  | static void iwl_reset_channel_flag(struct iwl_priv *priv) | 
|  | { | 
|  | int i, j; | 
|  | for (i = 0; i < 3; i++) { | 
|  | struct ieee80211_hw_mode *hw_mode = (void *)&priv->modes[i]; | 
|  | for (j = 0; j < hw_mode->num_channels; j++) | 
|  | hw_mode->channels[j].flag = hw_mode->channels[j].val; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_init_hw_rates(struct iwl_priv *priv, | 
|  | struct ieee80211_rate *rates) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) { | 
|  | rates[i].rate = iwl_rates[i].ieee * 5; | 
|  | rates[i].val = i; /* Rate scaling will work on indexes */ | 
|  | rates[i].val2 = i; | 
|  | rates[i].flags = IEEE80211_RATE_SUPPORTED; | 
|  | /* Only OFDM have the bits-per-symbol set */ | 
|  | if ((i <= IWL_LAST_OFDM_RATE) && (i >= IWL_FIRST_OFDM_RATE)) | 
|  | rates[i].flags |= IEEE80211_RATE_OFDM; | 
|  | else { | 
|  | /* | 
|  | * If CCK 1M then set rate flag to CCK else CCK_2 | 
|  | * which is CCK | PREAMBLE2 | 
|  | */ | 
|  | rates[i].flags |= (iwl_rates[i].plcp == 10) ? | 
|  | IEEE80211_RATE_CCK : IEEE80211_RATE_CCK_2; | 
|  | } | 
|  |  | 
|  | /* Set up which ones are basic rates... */ | 
|  | if (IWL_BASIC_RATES_MASK & (1 << i)) | 
|  | rates[i].flags |= IEEE80211_RATE_BASIC; | 
|  | } | 
|  |  | 
|  | iwl4965_init_hw_rates(priv, rates); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_init_geos - Initialize mac80211's geo/channel info based from eeprom | 
|  | */ | 
|  | static int iwl_init_geos(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_channel_info *ch; | 
|  | struct ieee80211_hw_mode *modes; | 
|  | struct ieee80211_channel *channels; | 
|  | struct ieee80211_channel *geo_ch; | 
|  | struct ieee80211_rate *rates; | 
|  | int i = 0; | 
|  | enum { | 
|  | A = 0, | 
|  | B = 1, | 
|  | G = 2, | 
|  | A_11N = 3, | 
|  | G_11N = 4, | 
|  | }; | 
|  | int mode_count = 5; | 
|  |  | 
|  | if (priv->modes) { | 
|  | IWL_DEBUG_INFO("Geography modes already initialized.\n"); | 
|  | set_bit(STATUS_GEO_CONFIGURED, &priv->status); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | modes = kzalloc(sizeof(struct ieee80211_hw_mode) * mode_count, | 
|  | GFP_KERNEL); | 
|  | if (!modes) | 
|  | return -ENOMEM; | 
|  |  | 
|  | channels = kzalloc(sizeof(struct ieee80211_channel) * | 
|  | priv->channel_count, GFP_KERNEL); | 
|  | if (!channels) { | 
|  | kfree(modes); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_MAX_RATES + 1)), | 
|  | GFP_KERNEL); | 
|  | if (!rates) { | 
|  | kfree(modes); | 
|  | kfree(channels); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* 0 = 802.11a | 
|  | * 1 = 802.11b | 
|  | * 2 = 802.11g | 
|  | */ | 
|  |  | 
|  | /* 5.2GHz channels start after the 2.4GHz channels */ | 
|  | modes[A].mode = MODE_IEEE80211A; | 
|  | modes[A].channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; | 
|  | modes[A].rates = rates; | 
|  | modes[A].num_rates = 8;	/* just OFDM */ | 
|  | modes[A].rates = &rates[4]; | 
|  | modes[A].num_channels = 0; | 
|  |  | 
|  | modes[B].mode = MODE_IEEE80211B; | 
|  | modes[B].channels = channels; | 
|  | modes[B].rates = rates; | 
|  | modes[B].num_rates = 4;	/* just CCK */ | 
|  | modes[B].num_channels = 0; | 
|  |  | 
|  | modes[G].mode = MODE_IEEE80211G; | 
|  | modes[G].channels = channels; | 
|  | modes[G].rates = rates; | 
|  | modes[G].num_rates = 12;	/* OFDM & CCK */ | 
|  | modes[G].num_channels = 0; | 
|  |  | 
|  | modes[G_11N].mode = MODE_IEEE80211G; | 
|  | modes[G_11N].channels = channels; | 
|  | modes[G_11N].num_rates = 13;        /* OFDM & CCK */ | 
|  | modes[G_11N].rates = rates; | 
|  | modes[G_11N].num_channels = 0; | 
|  |  | 
|  | modes[A_11N].mode = MODE_IEEE80211A; | 
|  | modes[A_11N].channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; | 
|  | modes[A_11N].rates = &rates[4]; | 
|  | modes[A_11N].num_rates = 9; /* just OFDM */ | 
|  | modes[A_11N].num_channels = 0; | 
|  |  | 
|  | priv->ieee_channels = channels; | 
|  | priv->ieee_rates = rates; | 
|  |  | 
|  | iwl_init_hw_rates(priv, rates); | 
|  |  | 
|  | for (i = 0, geo_ch = channels; i < priv->channel_count; i++) { | 
|  | ch = &priv->channel_info[i]; | 
|  |  | 
|  | if (!is_channel_valid(ch)) { | 
|  | IWL_DEBUG_INFO("Channel %d [%sGHz] is restricted -- " | 
|  | "skipping.\n", | 
|  | ch->channel, is_channel_a_band(ch) ? | 
|  | "5.2" : "2.4"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (is_channel_a_band(ch)) { | 
|  | geo_ch = &modes[A].channels[modes[A].num_channels++]; | 
|  | modes[A_11N].num_channels++; | 
|  | } else { | 
|  | geo_ch = &modes[B].channels[modes[B].num_channels++]; | 
|  | modes[G].num_channels++; | 
|  | modes[G_11N].num_channels++; | 
|  | } | 
|  |  | 
|  | geo_ch->freq = ieee80211chan2mhz(ch->channel); | 
|  | geo_ch->chan = ch->channel; | 
|  | geo_ch->power_level = ch->max_power_avg; | 
|  | geo_ch->antenna_max = 0xff; | 
|  |  | 
|  | if (is_channel_valid(ch)) { | 
|  | geo_ch->flag = IEEE80211_CHAN_W_SCAN; | 
|  | if (ch->flags & EEPROM_CHANNEL_IBSS) | 
|  | geo_ch->flag |= IEEE80211_CHAN_W_IBSS; | 
|  |  | 
|  | if (ch->flags & EEPROM_CHANNEL_ACTIVE) | 
|  | geo_ch->flag |= IEEE80211_CHAN_W_ACTIVE_SCAN; | 
|  |  | 
|  | if (ch->flags & EEPROM_CHANNEL_RADAR) | 
|  | geo_ch->flag |= IEEE80211_CHAN_W_RADAR_DETECT; | 
|  |  | 
|  | if (ch->max_power_avg > priv->max_channel_txpower_limit) | 
|  | priv->max_channel_txpower_limit = | 
|  | ch->max_power_avg; | 
|  | } | 
|  |  | 
|  | geo_ch->val = geo_ch->flag; | 
|  | } | 
|  |  | 
|  | if ((modes[A].num_channels == 0) && priv->is_abg) { | 
|  | printk(KERN_INFO DRV_NAME | 
|  | ": Incorrectly detected BG card as ABG.  Please send " | 
|  | "your PCI ID 0x%04X:0x%04X to maintainer.\n", | 
|  | priv->pci_dev->device, priv->pci_dev->subsystem_device); | 
|  | priv->is_abg = 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO DRV_NAME | 
|  | ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", | 
|  | modes[G].num_channels, modes[A].num_channels); | 
|  |  | 
|  | /* | 
|  | * NOTE:  We register these in preference of order -- the | 
|  | * stack doesn't currently (as of 7.0.6 / Apr 24 '07) pick | 
|  | * a phymode based on rates or AP capabilities but seems to | 
|  | * configure it purely on if the channel being configured | 
|  | * is supported by a mode -- and the first match is taken | 
|  | */ | 
|  |  | 
|  | if (modes[G].num_channels) | 
|  | ieee80211_register_hwmode(priv->hw, &modes[G]); | 
|  | if (modes[B].num_channels) | 
|  | ieee80211_register_hwmode(priv->hw, &modes[B]); | 
|  | if (modes[A].num_channels) | 
|  | ieee80211_register_hwmode(priv->hw, &modes[A]); | 
|  |  | 
|  | priv->modes = modes; | 
|  | set_bit(STATUS_GEO_CONFIGURED, &priv->status); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * uCode download functions | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | static void iwl_dealloc_ucode_pci(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->ucode_code.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_code.len, | 
|  | priv->ucode_code.v_addr, | 
|  | priv->ucode_code.p_addr); | 
|  | priv->ucode_code.v_addr = NULL; | 
|  | } | 
|  | if (priv->ucode_data.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_data.len, | 
|  | priv->ucode_data.v_addr, | 
|  | priv->ucode_data.p_addr); | 
|  | priv->ucode_data.v_addr = NULL; | 
|  | } | 
|  | if (priv->ucode_data_backup.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_data_backup.len, | 
|  | priv->ucode_data_backup.v_addr, | 
|  | priv->ucode_data_backup.p_addr); | 
|  | priv->ucode_data_backup.v_addr = NULL; | 
|  | } | 
|  | if (priv->ucode_init.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_init.len, | 
|  | priv->ucode_init.v_addr, | 
|  | priv->ucode_init.p_addr); | 
|  | priv->ucode_init.v_addr = NULL; | 
|  | } | 
|  | if (priv->ucode_init_data.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_init_data.len, | 
|  | priv->ucode_init_data.v_addr, | 
|  | priv->ucode_init_data.p_addr); | 
|  | priv->ucode_init_data.v_addr = NULL; | 
|  | } | 
|  | if (priv->ucode_boot.v_addr != NULL) { | 
|  | pci_free_consistent(priv->pci_dev, | 
|  | priv->ucode_boot.len, | 
|  | priv->ucode_boot.v_addr, | 
|  | priv->ucode_boot.p_addr); | 
|  | priv->ucode_boot.v_addr = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_verify_inst_full - verify runtime uCode image in card vs. host, | 
|  | *     looking at all data. | 
|  | */ | 
|  | static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 * image, u32 len) | 
|  | { | 
|  | u32 val; | 
|  | u32 save_len = len; | 
|  | int rc = 0; | 
|  | u32 errcnt; | 
|  |  | 
|  | IWL_DEBUG_INFO("ucode inst image size is %u\n", len); | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | iwl_write_restricted(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); | 
|  |  | 
|  | errcnt = 0; | 
|  | for (; len > 0; len -= sizeof(u32), image++) { | 
|  | /* read data comes through single port, auto-incr addr */ | 
|  | /* NOTE: Use the debugless read so we don't flood kernel log | 
|  | * if IWL_DL_IO is set */ | 
|  | val = _iwl_read_restricted(priv, HBUS_TARG_MEM_RDAT); | 
|  | if (val != le32_to_cpu(*image)) { | 
|  | IWL_ERROR("uCode INST section is invalid at " | 
|  | "offset 0x%x, is 0x%x, s/b 0x%x\n", | 
|  | save_len - len, val, le32_to_cpu(*image)); | 
|  | rc = -EIO; | 
|  | errcnt++; | 
|  | if (errcnt >= 20) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  |  | 
|  | if (!errcnt) | 
|  | IWL_DEBUG_INFO | 
|  | ("ucode image in INSTRUCTION memory is good\n"); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, | 
|  | *   using sample data 100 bytes apart.  If these sample points are good, | 
|  | *   it's a pretty good bet that everything between them is good, too. | 
|  | */ | 
|  | static int iwl_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) | 
|  | { | 
|  | u32 val; | 
|  | int rc = 0; | 
|  | u32 errcnt = 0; | 
|  | u32 i; | 
|  |  | 
|  | IWL_DEBUG_INFO("ucode inst image size is %u\n", len); | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { | 
|  | /* read data comes through single port, auto-incr addr */ | 
|  | /* NOTE: Use the debugless read so we don't flood kernel log | 
|  | * if IWL_DL_IO is set */ | 
|  | iwl_write_restricted(priv, HBUS_TARG_MEM_RADDR, | 
|  | i + RTC_INST_LOWER_BOUND); | 
|  | val = _iwl_read_restricted(priv, HBUS_TARG_MEM_RDAT); | 
|  | if (val != le32_to_cpu(*image)) { | 
|  | #if 0 /* Enable this if you want to see details */ | 
|  | IWL_ERROR("uCode INST section is invalid at " | 
|  | "offset 0x%x, is 0x%x, s/b 0x%x\n", | 
|  | i, val, *image); | 
|  | #endif | 
|  | rc = -EIO; | 
|  | errcnt++; | 
|  | if (errcnt >= 3) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * iwl_verify_ucode - determine which instruction image is in SRAM, | 
|  | *    and verify its contents | 
|  | */ | 
|  | static int iwl_verify_ucode(struct iwl_priv *priv) | 
|  | { | 
|  | __le32 *image; | 
|  | u32 len; | 
|  | int rc = 0; | 
|  |  | 
|  | /* Try bootstrap */ | 
|  | image = (__le32 *)priv->ucode_boot.v_addr; | 
|  | len = priv->ucode_boot.len; | 
|  | rc = iwl_verify_inst_sparse(priv, image, len); | 
|  | if (rc == 0) { | 
|  | IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Try initialize */ | 
|  | image = (__le32 *)priv->ucode_init.v_addr; | 
|  | len = priv->ucode_init.len; | 
|  | rc = iwl_verify_inst_sparse(priv, image, len); | 
|  | if (rc == 0) { | 
|  | IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Try runtime/protocol */ | 
|  | image = (__le32 *)priv->ucode_code.v_addr; | 
|  | len = priv->ucode_code.len; | 
|  | rc = iwl_verify_inst_sparse(priv, image, len); | 
|  | if (rc == 0) { | 
|  | IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); | 
|  |  | 
|  | /* Show first several data entries in instruction SRAM. | 
|  | * Selection of bootstrap image is arbitrary. */ | 
|  | image = (__le32 *)priv->ucode_boot.v_addr; | 
|  | len = priv->ucode_boot.len; | 
|  | rc = iwl_verify_inst_full(priv, image, len); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* check contents of special bootstrap uCode SRAM */ | 
|  | static int iwl_verify_bsm(struct iwl_priv *priv) | 
|  | { | 
|  | __le32 *image = priv->ucode_boot.v_addr; | 
|  | u32 len = priv->ucode_boot.len; | 
|  | u32 reg; | 
|  | u32 val; | 
|  |  | 
|  | IWL_DEBUG_INFO("Begin verify bsm\n"); | 
|  |  | 
|  | /* verify BSM SRAM contents */ | 
|  | val = iwl_read_restricted_reg(priv, BSM_WR_DWCOUNT_REG); | 
|  | for (reg = BSM_SRAM_LOWER_BOUND; | 
|  | reg < BSM_SRAM_LOWER_BOUND + len; | 
|  | reg += sizeof(u32), image ++) { | 
|  | val = iwl_read_restricted_reg(priv, reg); | 
|  | if (val != le32_to_cpu(*image)) { | 
|  | IWL_ERROR("BSM uCode verification failed at " | 
|  | "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", | 
|  | BSM_SRAM_LOWER_BOUND, | 
|  | reg - BSM_SRAM_LOWER_BOUND, len, | 
|  | val, le32_to_cpu(*image)); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_load_bsm - Load bootstrap instructions | 
|  | * | 
|  | * BSM operation: | 
|  | * | 
|  | * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program | 
|  | * in special SRAM that does not power down during RFKILL.  When powering back | 
|  | * up after power-saving sleeps (or during initial uCode load), the BSM loads | 
|  | * the bootstrap program into the on-board processor, and starts it. | 
|  | * | 
|  | * The bootstrap program loads (via DMA) instructions and data for a new | 
|  | * program from host DRAM locations indicated by the host driver in the | 
|  | * BSM_DRAM_* registers.  Once the new program is loaded, it starts | 
|  | * automatically. | 
|  | * | 
|  | * When initializing the NIC, the host driver points the BSM to the | 
|  | * "initialize" uCode image.  This uCode sets up some internal data, then | 
|  | * notifies host via "initialize alive" that it is complete. | 
|  | * | 
|  | * The host then replaces the BSM_DRAM_* pointer values to point to the | 
|  | * normal runtime uCode instructions and a backup uCode data cache buffer | 
|  | * (filled initially with starting data values for the on-board processor), | 
|  | * then triggers the "initialize" uCode to load and launch the runtime uCode, | 
|  | * which begins normal operation. | 
|  | * | 
|  | * When doing a power-save shutdown, runtime uCode saves data SRAM into | 
|  | * the backup data cache in DRAM before SRAM is powered down. | 
|  | * | 
|  | * When powering back up, the BSM loads the bootstrap program.  This reloads | 
|  | * the runtime uCode instructions and the backup data cache into SRAM, | 
|  | * and re-launches the runtime uCode from where it left off. | 
|  | */ | 
|  | static int iwl_load_bsm(struct iwl_priv *priv) | 
|  | { | 
|  | __le32 *image = priv->ucode_boot.v_addr; | 
|  | u32 len = priv->ucode_boot.len; | 
|  | dma_addr_t pinst; | 
|  | dma_addr_t pdata; | 
|  | u32 inst_len; | 
|  | u32 data_len; | 
|  | int rc; | 
|  | int i; | 
|  | u32 done; | 
|  | u32 reg_offset; | 
|  |  | 
|  | IWL_DEBUG_INFO("Begin load bsm\n"); | 
|  |  | 
|  | /* make sure bootstrap program is no larger than BSM's SRAM size */ | 
|  | if (len > IWL_MAX_BSM_SIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Tell bootstrap uCode where to find the "Initialize" uCode | 
|  | *   in host DRAM ... bits 31:0 for 3945, bits 35:4 for 4965. | 
|  | * NOTE:  iwl_initialize_alive_start() will replace these values, | 
|  | *        after the "initialize" uCode has run, to point to | 
|  | *        runtime/protocol instructions and backup data cache. */ | 
|  | pinst = priv->ucode_init.p_addr >> 4; | 
|  | pdata = priv->ucode_init_data.p_addr >> 4; | 
|  | inst_len = priv->ucode_init.len; | 
|  | data_len = priv->ucode_init_data.len; | 
|  |  | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_INST_PTR_REG, pinst); | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_DATA_PTR_REG, pdata); | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); | 
|  |  | 
|  | /* Fill BSM memory with bootstrap instructions */ | 
|  | for (reg_offset = BSM_SRAM_LOWER_BOUND; | 
|  | reg_offset < BSM_SRAM_LOWER_BOUND + len; | 
|  | reg_offset += sizeof(u32), image++) | 
|  | _iwl_write_restricted_reg(priv, reg_offset, | 
|  | le32_to_cpu(*image)); | 
|  |  | 
|  | rc = iwl_verify_bsm(priv); | 
|  | if (rc) { | 
|  | iwl_release_restricted_access(priv); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ | 
|  | iwl_write_restricted_reg(priv, BSM_WR_MEM_SRC_REG, 0x0); | 
|  | iwl_write_restricted_reg(priv, BSM_WR_MEM_DST_REG, | 
|  | RTC_INST_LOWER_BOUND); | 
|  | iwl_write_restricted_reg(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); | 
|  |  | 
|  | /* Load bootstrap code into instruction SRAM now, | 
|  | *   to prepare to load "initialize" uCode */ | 
|  | iwl_write_restricted_reg(priv, BSM_WR_CTRL_REG, | 
|  | BSM_WR_CTRL_REG_BIT_START); | 
|  |  | 
|  | /* Wait for load of bootstrap uCode to finish */ | 
|  | for (i = 0; i < 100; i++) { | 
|  | done = iwl_read_restricted_reg(priv, BSM_WR_CTRL_REG); | 
|  | if (!(done & BSM_WR_CTRL_REG_BIT_START)) | 
|  | break; | 
|  | udelay(10); | 
|  | } | 
|  | if (i < 100) | 
|  | IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i); | 
|  | else { | 
|  | IWL_ERROR("BSM write did not complete!\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* Enable future boot loads whenever power management unit triggers it | 
|  | *   (e.g. when powering back up after power-save shutdown) */ | 
|  | iwl_write_restricted_reg(priv, BSM_WR_CTRL_REG, | 
|  | BSM_WR_CTRL_REG_BIT_START_EN); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_nic_start(struct iwl_priv *priv) | 
|  | { | 
|  | /* Remove all resets to allow NIC to operate */ | 
|  | iwl_write32(priv, CSR_RESET, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_read_ucode - Read uCode images from disk file. | 
|  | * | 
|  | * Copy into buffers for card to fetch via bus-mastering | 
|  | */ | 
|  | static int iwl_read_ucode(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_ucode *ucode; | 
|  | int rc = 0; | 
|  | const struct firmware *ucode_raw; | 
|  | const char *name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode"; | 
|  | u8 *src; | 
|  | size_t len; | 
|  | u32 ver, inst_size, data_size, init_size, init_data_size, boot_size; | 
|  |  | 
|  | /* Ask kernel firmware_class module to get the boot firmware off disk. | 
|  | * request_firmware() is synchronous, file is in memory on return. */ | 
|  | rc = request_firmware(&ucode_raw, name, &priv->pci_dev->dev); | 
|  | if (rc < 0) { | 
|  | IWL_ERROR("%s firmware file req failed: Reason %d\n", name, rc); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", | 
|  | name, ucode_raw->size); | 
|  |  | 
|  | /* Make sure that we got at least our header! */ | 
|  | if (ucode_raw->size < sizeof(*ucode)) { | 
|  | IWL_ERROR("File size way too small!\n"); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | /* Data from ucode file:  header followed by uCode images */ | 
|  | ucode = (void *)ucode_raw->data; | 
|  |  | 
|  | ver = le32_to_cpu(ucode->ver); | 
|  | inst_size = le32_to_cpu(ucode->inst_size); | 
|  | data_size = le32_to_cpu(ucode->data_size); | 
|  | init_size = le32_to_cpu(ucode->init_size); | 
|  | init_data_size = le32_to_cpu(ucode->init_data_size); | 
|  | boot_size = le32_to_cpu(ucode->boot_size); | 
|  |  | 
|  | IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver); | 
|  | IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", | 
|  | inst_size); | 
|  | IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", | 
|  | data_size); | 
|  | IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", | 
|  | init_size); | 
|  | IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", | 
|  | init_data_size); | 
|  | IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", | 
|  | boot_size); | 
|  |  | 
|  | /* Verify size of file vs. image size info in file's header */ | 
|  | if (ucode_raw->size < sizeof(*ucode) + | 
|  | inst_size + data_size + init_size + | 
|  | init_data_size + boot_size) { | 
|  |  | 
|  | IWL_DEBUG_INFO("uCode file size %d too small\n", | 
|  | (int)ucode_raw->size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | /* Verify that uCode images will fit in card's SRAM */ | 
|  | if (inst_size > IWL_MAX_INST_SIZE) { | 
|  | IWL_DEBUG_INFO("uCode instr len %d too large to fit in card\n", | 
|  | (int)inst_size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | if (data_size > IWL_MAX_DATA_SIZE) { | 
|  | IWL_DEBUG_INFO("uCode data len %d too large to fit in card\n", | 
|  | (int)data_size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  | if (init_size > IWL_MAX_INST_SIZE) { | 
|  | IWL_DEBUG_INFO | 
|  | ("uCode init instr len %d too large to fit in card\n", | 
|  | (int)init_size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  | if (init_data_size > IWL_MAX_DATA_SIZE) { | 
|  | IWL_DEBUG_INFO | 
|  | ("uCode init data len %d too large to fit in card\n", | 
|  | (int)init_data_size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  | if (boot_size > IWL_MAX_BSM_SIZE) { | 
|  | IWL_DEBUG_INFO | 
|  | ("uCode boot instr len %d too large to fit in bsm\n", | 
|  | (int)boot_size); | 
|  | rc = -EINVAL; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | /* Allocate ucode buffers for card's bus-master loading ... */ | 
|  |  | 
|  | /* Runtime instructions and 2 copies of data: | 
|  | * 1) unmodified from disk | 
|  | * 2) backup cache for save/restore during power-downs */ | 
|  | priv->ucode_code.len = inst_size; | 
|  | priv->ucode_code.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_code.len, | 
|  | &(priv->ucode_code.p_addr)); | 
|  |  | 
|  | priv->ucode_data.len = data_size; | 
|  | priv->ucode_data.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_data.len, | 
|  | &(priv->ucode_data.p_addr)); | 
|  |  | 
|  | priv->ucode_data_backup.len = data_size; | 
|  | priv->ucode_data_backup.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_data_backup.len, | 
|  | &(priv->ucode_data_backup.p_addr)); | 
|  |  | 
|  |  | 
|  | /* Initialization instructions and data */ | 
|  | priv->ucode_init.len = init_size; | 
|  | priv->ucode_init.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_init.len, | 
|  | &(priv->ucode_init.p_addr)); | 
|  |  | 
|  | priv->ucode_init_data.len = init_data_size; | 
|  | priv->ucode_init_data.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_init_data.len, | 
|  | &(priv->ucode_init_data.p_addr)); | 
|  |  | 
|  | /* Bootstrap (instructions only, no data) */ | 
|  | priv->ucode_boot.len = boot_size; | 
|  | priv->ucode_boot.v_addr = | 
|  | pci_alloc_consistent(priv->pci_dev, | 
|  | priv->ucode_boot.len, | 
|  | &(priv->ucode_boot.p_addr)); | 
|  |  | 
|  | if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || | 
|  | !priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr || | 
|  | !priv->ucode_boot.v_addr || !priv->ucode_data_backup.v_addr) | 
|  | goto err_pci_alloc; | 
|  |  | 
|  | /* Copy images into buffers for card's bus-master reads ... */ | 
|  |  | 
|  | /* Runtime instructions (first block of data in file) */ | 
|  | src = &ucode->data[0]; | 
|  | len = priv->ucode_code.len; | 
|  | IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %d\n", | 
|  | (int)len); | 
|  | memcpy(priv->ucode_code.v_addr, src, len); | 
|  | IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", | 
|  | priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); | 
|  |  | 
|  | /* Runtime data (2nd block) | 
|  | * NOTE:  Copy into backup buffer will be done in iwl_up()  */ | 
|  | src = &ucode->data[inst_size]; | 
|  | len = priv->ucode_data.len; | 
|  | IWL_DEBUG_INFO("Copying (but not loading) uCode data len %d\n", | 
|  | (int)len); | 
|  | memcpy(priv->ucode_data.v_addr, src, len); | 
|  | memcpy(priv->ucode_data_backup.v_addr, src, len); | 
|  |  | 
|  | /* Initialization instructions (3rd block) */ | 
|  | if (init_size) { | 
|  | src = &ucode->data[inst_size + data_size]; | 
|  | len = priv->ucode_init.len; | 
|  | IWL_DEBUG_INFO("Copying (but not loading) init instr len %d\n", | 
|  | (int)len); | 
|  | memcpy(priv->ucode_init.v_addr, src, len); | 
|  | } | 
|  |  | 
|  | /* Initialization data (4th block) */ | 
|  | if (init_data_size) { | 
|  | src = &ucode->data[inst_size + data_size + init_size]; | 
|  | len = priv->ucode_init_data.len; | 
|  | IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n", | 
|  | (int)len); | 
|  | memcpy(priv->ucode_init_data.v_addr, src, len); | 
|  | } | 
|  |  | 
|  | /* Bootstrap instructions (5th block) */ | 
|  | src = &ucode->data[inst_size + data_size + init_size + init_data_size]; | 
|  | len = priv->ucode_boot.len; | 
|  | IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n", | 
|  | (int)len); | 
|  | memcpy(priv->ucode_boot.v_addr, src, len); | 
|  |  | 
|  | /* We have our copies now, allow OS release its copies */ | 
|  | release_firmware(ucode_raw); | 
|  | return 0; | 
|  |  | 
|  | err_pci_alloc: | 
|  | IWL_ERROR("failed to allocate pci memory\n"); | 
|  | rc = -ENOMEM; | 
|  | iwl_dealloc_ucode_pci(priv); | 
|  |  | 
|  | err_release: | 
|  | release_firmware(ucode_raw); | 
|  |  | 
|  | error: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * iwl_set_ucode_ptrs - Set uCode address location | 
|  | * | 
|  | * Tell initialization uCode where to find runtime uCode. | 
|  | * | 
|  | * BSM registers initially contain pointers to initialization uCode. | 
|  | * We need to replace them to load runtime uCode inst and data, | 
|  | * and to save runtime data when powering down. | 
|  | */ | 
|  | static int iwl_set_ucode_ptrs(struct iwl_priv *priv) | 
|  | { | 
|  | dma_addr_t pinst; | 
|  | dma_addr_t pdata; | 
|  | int rc = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* bits 35:4 for 4965 */ | 
|  | pinst = priv->ucode_code.p_addr >> 4; | 
|  | pdata = priv->ucode_data_backup.p_addr >> 4; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | rc = iwl_grab_restricted_access(priv); | 
|  | if (rc) { | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Tell bootstrap uCode where to find image to load */ | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_INST_PTR_REG, pinst); | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_DATA_PTR_REG, pdata); | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_DATA_BYTECOUNT_REG, | 
|  | priv->ucode_data.len); | 
|  |  | 
|  | /* Inst bytecount must be last to set up, bit 31 signals uCode | 
|  | *   that all new ptr/size info is in place */ | 
|  | iwl_write_restricted_reg(priv, BSM_DRAM_INST_BYTECOUNT_REG, | 
|  | priv->ucode_code.len | BSM_DRAM_INST_LOAD); | 
|  |  | 
|  | iwl_release_restricted_access(priv); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_init_alive_start - Called after REPLY_ALIVE notification receieved | 
|  | * | 
|  | * Called after REPLY_ALIVE notification received from "initialize" uCode. | 
|  | * | 
|  | * The 4965 "initialize" ALIVE reply contains calibration data for: | 
|  | *   Voltage, temperature, and MIMO tx gain correction, now stored in priv | 
|  | *   (3945 does not contain this data). | 
|  | * | 
|  | * Tell "initialize" uCode to go ahead and load the runtime uCode. | 
|  | */ | 
|  | static void iwl_init_alive_start(struct iwl_priv *priv) | 
|  | { | 
|  | /* Check alive response for "valid" sign from uCode */ | 
|  | if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { | 
|  | /* We had an error bringing up the hardware, so take it | 
|  | * all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO("Initialize Alive failed.\n"); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | /* Bootstrap uCode has loaded initialize uCode ... verify inst image. | 
|  | * This is a paranoid check, because we would not have gotten the | 
|  | * "initialize" alive if code weren't properly loaded.  */ | 
|  | if (iwl_verify_ucode(priv)) { | 
|  | /* Runtime instruction load was bad; | 
|  | * take it all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | /* Calculate temperature */ | 
|  | priv->temperature = iwl4965_get_temperature(priv); | 
|  |  | 
|  | /* Send pointers to protocol/runtime uCode image ... init code will | 
|  | * load and launch runtime uCode, which will send us another "Alive" | 
|  | * notification. */ | 
|  | IWL_DEBUG_INFO("Initialization Alive received.\n"); | 
|  | if (iwl_set_ucode_ptrs(priv)) { | 
|  | /* Runtime instruction load won't happen; | 
|  | * take it all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); | 
|  | goto restart; | 
|  | } | 
|  | return; | 
|  |  | 
|  | restart: | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * iwl_alive_start - called after REPLY_ALIVE notification received | 
|  | *                   from protocol/runtime uCode (initialization uCode's | 
|  | *                   Alive gets handled by iwl_init_alive_start()). | 
|  | */ | 
|  | static void iwl_alive_start(struct iwl_priv *priv) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | IWL_DEBUG_INFO("Runtime Alive received.\n"); | 
|  |  | 
|  | if (priv->card_alive.is_valid != UCODE_VALID_OK) { | 
|  | /* We had an error bringing up the hardware, so take it | 
|  | * all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO("Alive failed.\n"); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | /* Initialize uCode has loaded Runtime uCode ... verify inst image. | 
|  | * This is a paranoid check, because we would not have gotten the | 
|  | * "runtime" alive if code weren't properly loaded.  */ | 
|  | if (iwl_verify_ucode(priv)) { | 
|  | /* Runtime instruction load was bad; | 
|  | * take it all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO("Bad runtime uCode load.\n"); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | rc = iwl4965_alive_notify(priv); | 
|  | if (rc) { | 
|  | IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", | 
|  | rc); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | /* After the ALIVE response, we can process host commands */ | 
|  | set_bit(STATUS_ALIVE, &priv->status); | 
|  |  | 
|  | /* Clear out the uCode error bit if it is set */ | 
|  | clear_bit(STATUS_FW_ERROR, &priv->status); | 
|  |  | 
|  | rc = iwl_init_channel_map(priv); | 
|  | if (rc) { | 
|  | IWL_ERROR("initializing regulatory failed: %d\n", rc); | 
|  | return; | 
|  | } | 
|  |  | 
|  | iwl_init_geos(priv); | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) | 
|  | return; | 
|  |  | 
|  | if (!priv->mac80211_registered) { | 
|  | /* Unlock so any user space entry points can call back into | 
|  | * the driver without a deadlock... */ | 
|  | mutex_unlock(&priv->mutex); | 
|  | iwl_rate_control_register(priv->hw); | 
|  | rc = ieee80211_register_hw(priv->hw); | 
|  | priv->hw->conf.beacon_int = 100; | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (rc) { | 
|  | iwl_rate_control_unregister(priv->hw); | 
|  | IWL_ERROR("Failed to register network " | 
|  | "device (error %d)\n", rc); | 
|  | return; | 
|  | } | 
|  |  | 
|  | priv->mac80211_registered = 1; | 
|  |  | 
|  | iwl_reset_channel_flag(priv); | 
|  | } else | 
|  | ieee80211_start_queues(priv->hw); | 
|  |  | 
|  | priv->active_rate = priv->rates_mask; | 
|  | priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; | 
|  |  | 
|  | iwl_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode)); | 
|  |  | 
|  | if (iwl_is_associated(priv)) { | 
|  | struct iwl_rxon_cmd *active_rxon = | 
|  | (struct iwl_rxon_cmd *)(&priv->active_rxon); | 
|  |  | 
|  | memcpy(&priv->staging_rxon, &priv->active_rxon, | 
|  | sizeof(priv->staging_rxon)); | 
|  | active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | } else { | 
|  | /* Initialize our rx_config data */ | 
|  | iwl_connection_init_rx_config(priv); | 
|  | memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | /* Configure BT coexistence */ | 
|  | iwl_send_bt_config(priv); | 
|  |  | 
|  | /* Configure the adapter for unassociated operation */ | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | /* At this point, the NIC is initialized and operational */ | 
|  | priv->notif_missed_beacons = 0; | 
|  | set_bit(STATUS_READY, &priv->status); | 
|  |  | 
|  | iwl4965_rf_kill_ct_config(priv); | 
|  | IWL_DEBUG_INFO("ALIVE processing complete.\n"); | 
|  |  | 
|  | if (priv->error_recovering) | 
|  | iwl_error_recovery(priv); | 
|  |  | 
|  | return; | 
|  |  | 
|  | restart: | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  |  | 
|  | static void iwl_cancel_deferred_work(struct iwl_priv *priv); | 
|  |  | 
|  | static void __iwl_down(struct iwl_priv *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  | int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  | struct ieee80211_conf *conf = NULL; | 
|  |  | 
|  | IWL_DEBUG_INFO(DRV_NAME " is going down\n"); | 
|  |  | 
|  | conf = ieee80211_get_hw_conf(priv->hw); | 
|  |  | 
|  | if (!exit_pending) | 
|  | set_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | /* Unblock any waiting calls */ | 
|  | wake_up_interruptible_all(&priv->wait_command_queue); | 
|  |  | 
|  | /* Wipe out the EXIT_PENDING status bit if we are not actually | 
|  | * exiting the module */ | 
|  | if (!exit_pending) | 
|  | clear_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | /* stop and reset the on-board processor */ | 
|  | iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); | 
|  |  | 
|  | /* tell the device to stop sending interrupts */ | 
|  | iwl_disable_interrupts(priv); | 
|  |  | 
|  | if (priv->mac80211_registered) | 
|  | ieee80211_stop_queues(priv->hw); | 
|  |  | 
|  | /* If we have not previously called iwl_init() then | 
|  | * clear all bits but the RF Kill and SUSPEND bits and return */ | 
|  | if (!iwl_is_init(priv)) { | 
|  | priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << | 
|  | STATUS_RF_KILL_HW | | 
|  | test_bit(STATUS_RF_KILL_SW, &priv->status) << | 
|  | STATUS_RF_KILL_SW | | 
|  | test_bit(STATUS_IN_SUSPEND, &priv->status) << | 
|  | STATUS_IN_SUSPEND; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* ...otherwise clear out all the status bits but the RF Kill and | 
|  | * SUSPEND bits and continue taking the NIC down. */ | 
|  | priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << | 
|  | STATUS_RF_KILL_HW | | 
|  | test_bit(STATUS_RF_KILL_SW, &priv->status) << | 
|  | STATUS_RF_KILL_SW | | 
|  | test_bit(STATUS_IN_SUSPEND, &priv->status) << | 
|  | STATUS_IN_SUSPEND | | 
|  | test_bit(STATUS_FW_ERROR, &priv->status) << | 
|  | STATUS_FW_ERROR; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | iwl_hw_txq_ctx_stop(priv); | 
|  | iwl_hw_rxq_stop(priv); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (!iwl_grab_restricted_access(priv)) { | 
|  | iwl_write_restricted_reg(priv, APMG_CLK_DIS_REG, | 
|  | APMG_CLK_VAL_DMA_CLK_RQT); | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | udelay(5); | 
|  |  | 
|  | iwl_hw_nic_stop_master(priv); | 
|  | iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); | 
|  | iwl_hw_nic_reset(priv); | 
|  |  | 
|  | exit: | 
|  | memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); | 
|  |  | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  | priv->ibss_beacon = NULL; | 
|  |  | 
|  | /* clear out any free frames */ | 
|  | iwl_clear_free_frames(priv); | 
|  | } | 
|  |  | 
|  | static void iwl_down(struct iwl_priv *priv) | 
|  | { | 
|  | mutex_lock(&priv->mutex); | 
|  | __iwl_down(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | iwl_cancel_deferred_work(priv); | 
|  | } | 
|  |  | 
|  | #define MAX_HW_RESTARTS 5 | 
|  |  | 
|  | static int __iwl_up(struct iwl_priv *priv) | 
|  | { | 
|  | DECLARE_MAC_BUF(mac); | 
|  | int rc, i; | 
|  | u32 hw_rf_kill = 0; | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | IWL_WARNING("Exit pending; will not bring the NIC up\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_RF_KILL_SW, &priv->status)) { | 
|  | IWL_WARNING("Radio disabled by SW RF kill (module " | 
|  | "parameter)\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | 
|  |  | 
|  | rc = iwl_hw_nic_init(priv); | 
|  | if (rc) { | 
|  | IWL_ERROR("Unable to int nic\n"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* make sure rfkill handshake bits are cleared */ | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | 
|  | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | 
|  |  | 
|  | /* clear (again), then enable host interrupts */ | 
|  | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | 
|  | iwl_enable_interrupts(priv); | 
|  |  | 
|  | /* really make sure rfkill handshake bits are cleared */ | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  |  | 
|  | /* Copy original ucode data image from disk into backup cache. | 
|  | * This will be used to initialize the on-board processor's | 
|  | * data SRAM for a clean start when the runtime program first loads. */ | 
|  | memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, | 
|  | priv->ucode_data.len); | 
|  |  | 
|  | /* If platform's RF_KILL switch is set to KILL, | 
|  | * wait for BIT_INT_RF_KILL interrupt before loading uCode | 
|  | * and getting things started */ | 
|  | if (!(iwl_read32(priv, CSR_GP_CNTRL) & | 
|  | CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) | 
|  | hw_rf_kill = 1; | 
|  |  | 
|  | if (test_bit(STATUS_RF_KILL_HW, &priv->status) || hw_rf_kill) { | 
|  | IWL_WARNING("Radio disabled by HW RF Kill switch\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MAX_HW_RESTARTS; i++) { | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | /* load bootstrap state machine, | 
|  | * load bootstrap program into processor's memory, | 
|  | * prepare to load the "initialize" uCode */ | 
|  | rc = iwl_load_bsm(priv); | 
|  |  | 
|  | if (rc) { | 
|  | IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* start card; "initialize" will load runtime ucode */ | 
|  | iwl_nic_start(priv); | 
|  |  | 
|  | /* MAC Address location in EEPROM same for 3945/4965 */ | 
|  | get_eeprom_mac(priv, priv->mac_addr); | 
|  | IWL_DEBUG_INFO("MAC address: %s\n", | 
|  | print_mac(mac, priv->mac_addr)); | 
|  |  | 
|  | SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); | 
|  |  | 
|  | IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | set_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  | __iwl_down(priv); | 
|  |  | 
|  | /* tried to restart and config the device for as long as our | 
|  | * patience could withstand */ | 
|  | IWL_ERROR("Unable to initialize device after %d attempts.\n", i); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * Workqueue callbacks | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static void iwl_bg_init_alive_start(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(data, struct iwl_priv, init_alive_start.work); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_init_alive_start(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_alive_start(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(data, struct iwl_priv, alive_start.work); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_alive_start(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_rf_kill(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill); | 
|  |  | 
|  | wake_up_interruptible(&priv->wait_command_queue); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (!iwl_is_rfkill(priv)) { | 
|  | IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL, | 
|  | "HW and/or SW RF Kill no longer active, restarting " | 
|  | "device\n"); | 
|  | if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } else { | 
|  |  | 
|  | if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) | 
|  | IWL_DEBUG_RF_KILL("Can not turn radio back on - " | 
|  | "disabled by SW switch\n"); | 
|  | else | 
|  | IWL_WARNING("Radio Frequency Kill Switch is On:\n" | 
|  | "Kill switch must be turned off for " | 
|  | "wireless networking to work.\n"); | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) | 
|  |  | 
|  | static void iwl_bg_scan_check(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(data, struct iwl_priv, scan_check.work); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (test_bit(STATUS_SCANNING, &priv->status) || | 
|  | test_bit(STATUS_SCAN_ABORTING, &priv->status)) { | 
|  | IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, | 
|  | "Scan completion watchdog resetting adapter (%dms)\n", | 
|  | jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); | 
|  |  | 
|  | if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | iwl_send_scan_abort(priv); | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_request_scan(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(data, struct iwl_priv, request_scan); | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_SCAN_CMD, | 
|  | .len = sizeof(struct iwl_scan_cmd), | 
|  | .meta.flags = CMD_SIZE_HUGE, | 
|  | }; | 
|  | int rc = 0; | 
|  | struct iwl_scan_cmd *scan; | 
|  | struct ieee80211_conf *conf = NULL; | 
|  | u8 direct_mask; | 
|  | int phymode; | 
|  |  | 
|  | conf = ieee80211_get_hw_conf(priv->hw); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (!iwl_is_ready(priv)) { | 
|  | IWL_WARNING("request scan called when driver not ready.\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* Make sure the scan wasn't cancelled before this queued work | 
|  | * was given the chance to run... */ | 
|  | if (!test_bit(STATUS_SCANNING, &priv->status)) | 
|  | goto done; | 
|  |  | 
|  | /* This should never be called or scheduled if there is currently | 
|  | * a scan active in the hardware. */ | 
|  | if (test_bit(STATUS_SCAN_HW, &priv->status)) { | 
|  | IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. " | 
|  | "Ignoring second request.\n"); | 
|  | rc = -EIO; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { | 
|  | IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) { | 
|  | IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!test_bit(STATUS_READY, &priv->status)) { | 
|  | IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!priv->scan_bands) { | 
|  | IWL_DEBUG_HC("Aborting scan due to no requested bands\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!priv->scan) { | 
|  | priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) + | 
|  | IWL_MAX_SCAN_SIZE, GFP_KERNEL); | 
|  | if (!priv->scan) { | 
|  | rc = -ENOMEM; | 
|  | goto done; | 
|  | } | 
|  | } | 
|  | scan = priv->scan; | 
|  | memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); | 
|  |  | 
|  | scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; | 
|  | scan->quiet_time = IWL_ACTIVE_QUIET_TIME; | 
|  |  | 
|  | if (iwl_is_associated(priv)) { | 
|  | u16 interval = 0; | 
|  | u32 extra; | 
|  | u32 suspend_time = 100; | 
|  | u32 scan_suspend_time = 100; | 
|  | unsigned long flags; | 
|  |  | 
|  | IWL_DEBUG_INFO("Scanning while associated...\n"); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | interval = priv->beacon_int; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | scan->suspend_time = 0; | 
|  | scan->max_out_time = cpu_to_le32(200 * 1024); | 
|  | if (!interval) | 
|  | interval = suspend_time; | 
|  |  | 
|  | extra = (suspend_time / interval) << 22; | 
|  | scan_suspend_time = (extra | | 
|  | ((suspend_time % interval) * 1024)); | 
|  | scan->suspend_time = cpu_to_le32(scan_suspend_time); | 
|  | IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n", | 
|  | scan_suspend_time, interval); | 
|  | } | 
|  |  | 
|  | /* We should add the ability for user to lock to PASSIVE ONLY */ | 
|  | if (priv->one_direct_scan) { | 
|  | IWL_DEBUG_SCAN | 
|  | ("Kicking off one direct scan for '%s'\n", | 
|  | iwl_escape_essid(priv->direct_ssid, | 
|  | priv->direct_ssid_len)); | 
|  | scan->direct_scan[0].id = WLAN_EID_SSID; | 
|  | scan->direct_scan[0].len = priv->direct_ssid_len; | 
|  | memcpy(scan->direct_scan[0].ssid, | 
|  | priv->direct_ssid, priv->direct_ssid_len); | 
|  | direct_mask = 1; | 
|  | } else if (!iwl_is_associated(priv) && priv->essid_len) { | 
|  | scan->direct_scan[0].id = WLAN_EID_SSID; | 
|  | scan->direct_scan[0].len = priv->essid_len; | 
|  | memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); | 
|  | direct_mask = 1; | 
|  | } else | 
|  | direct_mask = 0; | 
|  |  | 
|  | /* We don't build a direct scan probe request; the uCode will do | 
|  | * that based on the direct_mask added to each channel entry */ | 
|  | scan->tx_cmd.len = cpu_to_le16( | 
|  | iwl_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data, | 
|  | IWL_MAX_SCAN_SIZE - sizeof(scan), 0)); | 
|  | scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; | 
|  | scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id; | 
|  | scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; | 
|  |  | 
|  | /* flags + rate selection */ | 
|  |  | 
|  | scan->tx_cmd.tx_flags |= cpu_to_le32(0x200); | 
|  |  | 
|  | switch (priv->scan_bands) { | 
|  | case 2: | 
|  | scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; | 
|  | scan->tx_cmd.rate_n_flags = | 
|  | iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, | 
|  | RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK); | 
|  |  | 
|  | scan->good_CRC_th = 0; | 
|  | phymode = MODE_IEEE80211G; | 
|  | break; | 
|  |  | 
|  | case 1: | 
|  | scan->tx_cmd.rate_n_flags = | 
|  | iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, | 
|  | RATE_MCS_ANT_B_MSK); | 
|  | scan->good_CRC_th = IWL_GOOD_CRC_TH; | 
|  | phymode = MODE_IEEE80211A; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | IWL_WARNING("Invalid scan band count\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* select Rx chains */ | 
|  |  | 
|  | /* Force use of chains B and C (0x6) for scan Rx. | 
|  | * Avoid A (0x1) because of its off-channel reception on A-band. | 
|  | * MIMO is not used here, but value is required to make uCode happy. */ | 
|  | scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | | 
|  | cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | | 
|  | (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) | | 
|  | (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) | 
|  | scan->filter_flags = RXON_FILTER_PROMISC_MSK; | 
|  |  | 
|  | if (direct_mask) | 
|  | IWL_DEBUG_SCAN | 
|  | ("Initiating direct scan for %s.\n", | 
|  | iwl_escape_essid(priv->essid, priv->essid_len)); | 
|  | else | 
|  | IWL_DEBUG_SCAN("Initiating indirect scan.\n"); | 
|  |  | 
|  | scan->channel_count = | 
|  | iwl_get_channels_for_scan( | 
|  | priv, phymode, 1, /* active */ | 
|  | direct_mask, | 
|  | (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); | 
|  |  | 
|  | cmd.len += le16_to_cpu(scan->tx_cmd.len) + | 
|  | scan->channel_count * sizeof(struct iwl_scan_channel); | 
|  | cmd.data = scan; | 
|  | scan->len = cpu_to_le16(cmd.len); | 
|  |  | 
|  | set_bit(STATUS_SCAN_HW, &priv->status); | 
|  | rc = iwl_send_cmd_sync(priv, &cmd); | 
|  | if (rc) | 
|  | goto done; | 
|  |  | 
|  | queue_delayed_work(priv->workqueue, &priv->scan_check, | 
|  | IWL_SCAN_CHECK_WATCHDOG); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  |  | 
|  | done: | 
|  | /* inform mac80211 sacn aborted */ | 
|  | queue_work(priv->workqueue, &priv->scan_completed); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_up(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(data, struct iwl_priv, up); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | __iwl_up(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_restart(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | iwl_down(priv); | 
|  | queue_work(priv->workqueue, &priv->up); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_rx_replenish(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(data, struct iwl_priv, rx_replenish); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_rx_replenish(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_post_associate(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(data, struct iwl_priv, | 
|  | post_associate.work); | 
|  |  | 
|  | int rc = 0; | 
|  | struct ieee80211_conf *conf = NULL; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { | 
|  | IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_ASSOC("Associated as %d to: %s\n", | 
|  | priv->assoc_id, | 
|  | print_mac(mac, priv->active_rxon.bssid_addr)); | 
|  |  | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (!priv->interface_id || !priv->is_open) { | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  | iwl_scan_cancel_timeout(priv, 200); | 
|  |  | 
|  | conf = ieee80211_get_hw_conf(priv->hw); | 
|  |  | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd)); | 
|  | iwl_setup_rxon_timing(priv); | 
|  | rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, | 
|  | sizeof(priv->rxon_timing), &priv->rxon_timing); | 
|  | if (rc) | 
|  | IWL_WARNING("REPLY_RXON_TIMING failed - " | 
|  | "Attempting to continue.\n"); | 
|  |  | 
|  | priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | if (priv->is_ht_enabled && priv->current_assoc_ht.is_ht) | 
|  | iwl4965_set_rxon_ht(priv, &priv->current_assoc_ht); | 
|  | else { | 
|  | priv->active_rate_ht[0] = 0; | 
|  | priv->active_rate_ht[1] = 0; | 
|  | priv->current_channel_width = IWL_CHANNEL_WIDTH_20MHZ; | 
|  | } | 
|  | #endif /* CONFIG_IWLWIFI_HT*/ | 
|  | iwl4965_set_rxon_chain(priv); | 
|  | priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); | 
|  |  | 
|  | IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", | 
|  | priv->assoc_id, priv->beacon_int); | 
|  |  | 
|  | if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) | 
|  | priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  |  | 
|  | if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { | 
|  | if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) | 
|  | priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) | 
|  | priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | } | 
|  |  | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | switch (priv->iw_mode) { | 
|  | case IEEE80211_IF_TYPE_STA: | 
|  | iwl_rate_scale_init(priv->hw, IWL_AP_ID); | 
|  | break; | 
|  |  | 
|  | case IEEE80211_IF_TYPE_IBSS: | 
|  |  | 
|  | /* clear out the station table */ | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | iwl_rxon_add_station(priv, BROADCAST_ADDR, 0); | 
|  | iwl_rxon_add_station(priv, priv->bssid, 0); | 
|  | iwl_rate_scale_init(priv->hw, IWL_STA_ID); | 
|  | iwl_send_beacon_cmd(priv); | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | IWL_ERROR("%s Should not be called in %d mode\n", | 
|  | __FUNCTION__, priv->iw_mode); | 
|  | break; | 
|  | } | 
|  |  | 
|  | iwl_sequence_reset(priv); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SENSITIVITY | 
|  | /* Enable Rx differential gain and sensitivity calibrations */ | 
|  | iwl4965_chain_noise_reset(priv); | 
|  | priv->start_calib = 1; | 
|  | #endif /* CONFIG_IWLWIFI_SENSITIVITY */ | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) | 
|  | priv->assoc_station_added = 1; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | iwl_activate_qos(priv, 0); | 
|  | #endif /* CONFIG_IWLWIFI_QOS */ | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_abort_scan(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(work, struct iwl_priv, | 
|  | abort_scan); | 
|  |  | 
|  | if (!iwl_is_ready(priv)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | set_bit(STATUS_SCAN_ABORTING, &priv->status); | 
|  | iwl_send_scan_abort(priv); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_scan_completed(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, scan_completed); | 
|  |  | 
|  | IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n"); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | ieee80211_scan_completed(priv->hw); | 
|  |  | 
|  | /* Since setting the TXPOWER may have been deferred while | 
|  | * performing the scan, fire one off */ | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_hw_reg_send_txpower(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * mac80211 entry point functions | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static int iwl_mac_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | /* we should be verifying the device is ready to be opened */ | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | priv->is_open = 1; | 
|  |  | 
|  | if (!iwl_is_rfkill(priv)) | 
|  | ieee80211_start_queues(priv->hw); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_mac_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | /* stop mac, cancel any scan request and clear | 
|  | * RXON_FILTER_ASSOC_MSK BIT | 
|  | */ | 
|  | priv->is_open = 0; | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  | cancel_delayed_work(&priv->post_associate); | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | } | 
|  |  | 
|  | static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_tx_control *ctl) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { | 
|  | IWL_DEBUG_MAC80211("leave - monitor\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, | 
|  | ctl->tx_rate); | 
|  |  | 
|  | if (iwl_tx_skb(priv, skb, ctl)) | 
|  | dev_kfree_skb_any(skb); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_if_init_conf *conf) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | unsigned long flags; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter: id %d, type %d\n", conf->if_id, conf->type); | 
|  |  | 
|  | if (priv->interface_id) { | 
|  | IWL_DEBUG_MAC80211("leave - interface_id != 0\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->interface_id = conf->if_id; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (conf->mac_addr) { | 
|  | IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); | 
|  | memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); | 
|  | } | 
|  | iwl_set_mode(priv, conf->type); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_mac_config - mac80211 config callback | 
|  | * | 
|  | * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to | 
|  | * be set inappropriately and the driver currently sets the hardware up to | 
|  | * use it whenever needed. | 
|  | */ | 
|  | static int iwl_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | const struct iwl_channel_info *ch_info; | 
|  | unsigned long flags; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel); | 
|  |  | 
|  | if (!iwl_is_ready(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - not ready\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only | 
|  | * what is exposed through include/ declrations */ | 
|  | if (unlikely(!iwl_param_disable_hw_scan && | 
|  | test_bit(STATUS_SCANNING, &priv->status))) { | 
|  | IWL_DEBUG_MAC80211("leave - scanning\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | ch_info = iwl_get_channel_info(priv, conf->phymode, conf->channel); | 
|  | if (!is_channel_valid(ch_info)) { | 
|  | IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n", | 
|  | conf->channel, conf->phymode); | 
|  | IWL_DEBUG_MAC80211("leave - invalid channel\n"); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | /* if we are switching fron ht to 2.4 clear flags | 
|  | * from any ht related info since 2.4 does not | 
|  | * support ht */ | 
|  | if ((le16_to_cpu(priv->staging_rxon.channel) != conf->channel) | 
|  | #ifdef IEEE80211_CONF_CHANNEL_SWITCH | 
|  | && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) | 
|  | #endif | 
|  | ) | 
|  | priv->staging_rxon.flags = 0; | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  |  | 
|  | iwl_set_rxon_channel(priv, conf->phymode, conf->channel); | 
|  |  | 
|  | iwl_set_flags_for_phymode(priv, conf->phymode); | 
|  |  | 
|  | /* The list of supported rates and rate mask can be different | 
|  | * for each phymode; since the phymode may have changed, reset | 
|  | * the rate mask to what mac80211 lists */ | 
|  | iwl_set_rate(priv); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | #ifdef IEEE80211_CONF_CHANNEL_SWITCH | 
|  | if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { | 
|  | iwl_hw_channel_switch(priv, conf->channel); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | iwl_radio_kill_sw(priv, !conf->radio_enabled); | 
|  |  | 
|  | if (!conf->radio_enabled) { | 
|  | IWL_DEBUG_MAC80211("leave - radio disabled\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - RF kill\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | iwl_set_rate(priv); | 
|  |  | 
|  | if (memcmp(&priv->active_rxon, | 
|  | &priv->staging_rxon, sizeof(priv->staging_rxon))) | 
|  | iwl_commit_rxon(priv); | 
|  | else | 
|  | IWL_DEBUG_INFO("No re-sending same RXON configuration.\n"); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_config_ap(struct iwl_priv *priv) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | if (priv->status & STATUS_EXIT_PENDING) | 
|  | return; | 
|  |  | 
|  | /* The following should be done only at AP bring up */ | 
|  | if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) { | 
|  |  | 
|  | /* RXON - unassoc (to set timing command) */ | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | /* RXON Timing */ | 
|  | memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd)); | 
|  | iwl_setup_rxon_timing(priv); | 
|  | rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, | 
|  | sizeof(priv->rxon_timing), &priv->rxon_timing); | 
|  | if (rc) | 
|  | IWL_WARNING("REPLY_RXON_TIMING failed - " | 
|  | "Attempting to continue.\n"); | 
|  |  | 
|  | iwl4965_set_rxon_chain(priv); | 
|  |  | 
|  | /* FIXME: what should be the assoc_id for AP? */ | 
|  | priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); | 
|  | if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) | 
|  | priv->staging_rxon.flags |= | 
|  | RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags &= | 
|  | ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  |  | 
|  | if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { | 
|  | if (priv->assoc_capability & | 
|  | WLAN_CAPABILITY_SHORT_SLOT_TIME) | 
|  | priv->staging_rxon.flags |= | 
|  | RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | priv->staging_rxon.flags &= | 
|  | ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) | 
|  | priv->staging_rxon.flags &= | 
|  | ~RXON_FLG_SHORT_SLOT_MSK; | 
|  | } | 
|  | /* restore RXON assoc */ | 
|  | priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | iwl_activate_qos(priv, 1); | 
|  | #endif | 
|  | iwl_rxon_add_station(priv, BROADCAST_ADDR, 0); | 
|  | } | 
|  | iwl_send_beacon_cmd(priv); | 
|  |  | 
|  | /* FIXME - we need to add code here to detect a totally new | 
|  | * configuration, reset the AP, unassoc, rxon timing, assoc, | 
|  | * clear sta table, add BCAST sta... */ | 
|  | } | 
|  |  | 
|  | static int iwl_mac_config_interface(struct ieee80211_hw *hw, int if_id, | 
|  | struct ieee80211_if_conf *conf) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | unsigned long flags; | 
|  | int rc; | 
|  |  | 
|  | if (conf == NULL) | 
|  | return -EIO; | 
|  |  | 
|  | if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && | 
|  | (!conf->beacon || !conf->ssid_len)) { | 
|  | IWL_DEBUG_MAC80211 | 
|  | ("Leaving in AP mode because HostAPD is not ready.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter: interface id %d\n", if_id); | 
|  | if (conf->bssid) | 
|  | IWL_DEBUG_MAC80211("bssid: %s\n", | 
|  | print_mac(mac, conf->bssid)); | 
|  |  | 
|  | /* | 
|  | * very dubious code was here; the probe filtering flag is never set: | 
|  | * | 
|  | if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && | 
|  | !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { | 
|  | */ | 
|  | if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { | 
|  | IWL_DEBUG_MAC80211("leave - scanning\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (priv->interface_id != if_id) { | 
|  | IWL_DEBUG_MAC80211("leave - interface_id != if_id\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { | 
|  | if (!conf->bssid) { | 
|  | conf->bssid = priv->mac_addr; | 
|  | memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); | 
|  | IWL_DEBUG_MAC80211("bssid was set to: %s\n", | 
|  | print_mac(mac, conf->bssid)); | 
|  | } | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  |  | 
|  | priv->ibss_beacon = conf->beacon; | 
|  | } | 
|  |  | 
|  | if (conf->bssid && !is_zero_ether_addr(conf->bssid) && | 
|  | !is_multicast_ether_addr(conf->bssid)) { | 
|  | /* If there is currently a HW scan going on in the background | 
|  | * then we need to cancel it else the RXON below will fail. */ | 
|  | if (iwl_scan_cancel_timeout(priv, 100)) { | 
|  | IWL_WARNING("Aborted scan still in progress " | 
|  | "after 100ms\n"); | 
|  | IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EAGAIN; | 
|  | } | 
|  | memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); | 
|  |  | 
|  | /* TODO: Audit driver for usage of these members and see | 
|  | * if mac80211 deprecates them (priv->bssid looks like it | 
|  | * shouldn't be there, but I haven't scanned the IBSS code | 
|  | * to verify) - jpk */ | 
|  | memcpy(priv->bssid, conf->bssid, ETH_ALEN); | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) | 
|  | iwl_config_ap(priv); | 
|  | else { | 
|  | rc = iwl_commit_rxon(priv); | 
|  | if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) | 
|  | iwl_rxon_add_station( | 
|  | priv, priv->active_rxon.bssid_addr, 1); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (!conf->ssid_len) | 
|  | memset(priv->essid, 0, IW_ESSID_MAX_SIZE); | 
|  | else | 
|  | memcpy(priv->essid, conf->ssid, conf->ssid_len); | 
|  |  | 
|  | priv->essid_len = conf->ssid_len; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | int mc_count, struct dev_addr_list *mc_list) | 
|  | { | 
|  | /* | 
|  | * XXX: dummy | 
|  | * see also iwl_connection_init_rx_config | 
|  | */ | 
|  | *total_flags = 0; | 
|  | } | 
|  |  | 
|  | static void iwl_mac_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_if_init_conf *conf) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  | cancel_delayed_work(&priv->post_associate); | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  |  | 
|  | if (priv->interface_id == conf->if_id) { | 
|  | priv->interface_id = 0; | 
|  | memset(priv->bssid, 0, ETH_ALEN); | 
|  | memset(priv->essid, 0, IW_ESSID_MAX_SIZE); | 
|  | priv->essid_len = 0; | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | } | 
|  |  | 
|  | #define IWL_DELAY_NEXT_SCAN (HZ*2) | 
|  | static int iwl_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) | 
|  | { | 
|  | int rc = 0; | 
|  | unsigned long flags; | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | rc = -EIO; | 
|  | IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {	/* APs don't scan */ | 
|  | rc = -EIO; | 
|  | IWL_ERROR("ERROR: APs don't scan\n"); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* if we just finished scan ask for delay */ | 
|  | if (priv->last_scan_jiffies && | 
|  | time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, | 
|  | jiffies)) { | 
|  | rc = -EAGAIN; | 
|  | goto out_unlock; | 
|  | } | 
|  | if (len) { | 
|  | IWL_DEBUG_SCAN("direct scan for  " | 
|  | "%s [%d]\n ", | 
|  | iwl_escape_essid(ssid, len), (int)len); | 
|  |  | 
|  | priv->one_direct_scan = 1; | 
|  | priv->direct_ssid_len = (u8) | 
|  | min((u8) len, (u8) IW_ESSID_MAX_SIZE); | 
|  | memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); | 
|  | } else | 
|  | priv->one_direct_scan = 0; | 
|  |  | 
|  | rc = iwl_scan_initiate(priv); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | out_unlock: | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | 
|  | const u8 *local_addr, const u8 *addr, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | int rc = 0; | 
|  | u8 sta_id; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | if (!iwl_param_hwcrypto) { | 
|  | IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | if (is_zero_ether_addr(addr)) | 
|  | /* only support pairwise keys */ | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | sta_id = iwl_hw_find_station(priv, addr); | 
|  | if (sta_id == IWL_INVALID_STATION) { | 
|  | IWL_DEBUG_MAC80211("leave - %s not in station map.\n", | 
|  | print_mac(mac, addr)); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  |  | 
|  | switch (cmd) { | 
|  | case  SET_KEY: | 
|  | rc = iwl_update_sta_key_info(priv, key, sta_id); | 
|  | if (!rc) { | 
|  | iwl_set_rxon_hwcrypto(priv, 1); | 
|  | iwl_commit_rxon(priv); | 
|  | key->hw_key_idx = sta_id; | 
|  | IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n"); | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | } | 
|  | break; | 
|  | case DISABLE_KEY: | 
|  | rc = iwl_clear_sta_key_info(priv, sta_id); | 
|  | if (!rc) { | 
|  | iwl_set_rxon_hwcrypto(priv, 0); | 
|  | iwl_commit_rxon(priv); | 
|  | IWL_DEBUG_MAC80211("disable hwcrypto key\n"); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | rc = -EINVAL; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_conf_tx(struct ieee80211_hw *hw, int queue, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | unsigned long flags; | 
|  | int q; | 
|  | #endif /* CONFIG_IWL_QOS */ | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - RF not ready\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (queue >= AC_NUM) { | 
|  | IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | if (!priv->qos_data.qos_enable) { | 
|  | priv->qos_data.qos_active = 0; | 
|  | IWL_DEBUG_MAC80211("leave - qos not enabled\n"); | 
|  | return 0; | 
|  | } | 
|  | q = AC_NUM - 1 - queue; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); | 
|  | priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); | 
|  | priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; | 
|  | priv->qos_data.def_qos_parm.ac[q].edca_txop = | 
|  | cpu_to_le16((params->burst_time * 100)); | 
|  |  | 
|  | priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; | 
|  | priv->qos_data.qos_active = 1; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (priv->iw_mode == IEEE80211_IF_TYPE_AP) | 
|  | iwl_activate_qos(priv, 1); | 
|  | else if (priv->assoc_id && iwl_is_associated(priv)) | 
|  | iwl_activate_qos(priv, 0); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | #endif /*CONFIG_IWLWIFI_QOS */ | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, | 
|  | struct ieee80211_tx_queue_stats *stats) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | int i, avail; | 
|  | struct iwl_tx_queue *txq; | 
|  | struct iwl_queue *q; | 
|  | unsigned long flags; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - RF not ready\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | for (i = 0; i < AC_NUM; i++) { | 
|  | txq = &priv->txq[i]; | 
|  | q = &txq->q; | 
|  | avail = iwl_queue_space(q); | 
|  |  | 
|  | stats->data[i].len = q->n_window - avail; | 
|  | stats->data[i].limit = q->n_window - q->high_mark; | 
|  | stats->data[i].count = q->n_window; | 
|  |  | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_get_stats(struct ieee80211_hw *hw, | 
|  | struct ieee80211_low_level_stats *stats) | 
|  | { | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u64 iwl_mac_get_tsf(struct ieee80211_hw *hw) | 
|  | { | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_mac_reset_tsf(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | unsigned long flags; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | priv->lq_mngr.lq_ready = 0; | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | memset(&priv->current_assoc_ht, 0, sizeof(struct sta_ht_info)); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | /*	if (priv->lq_mngr.agg_ctrl.granted_ba) | 
|  | iwl4965_turn_off_agg(priv, TID_ALL_SPECIFIED);*/ | 
|  |  | 
|  | memset(&(priv->lq_mngr.agg_ctrl), 0, sizeof(struct iwl_agg_control)); | 
|  | priv->lq_mngr.agg_ctrl.tid_traffic_load_threshold = 10; | 
|  | priv->lq_mngr.agg_ctrl.ba_timeout = 5000; | 
|  | priv->lq_mngr.agg_ctrl.auto_agg = 1; | 
|  |  | 
|  | if (priv->lq_mngr.agg_ctrl.auto_agg) | 
|  | priv->lq_mngr.agg_ctrl.requested_ba = TID_ALL_ENABLED; | 
|  | #endif /*CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | iwl_reset_qos(priv); | 
|  | #endif | 
|  |  | 
|  | cancel_delayed_work(&priv->post_associate); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | priv->assoc_id = 0; | 
|  | priv->assoc_capability = 0; | 
|  | priv->call_post_assoc_from_beacon = 0; | 
|  | priv->assoc_station_added = 0; | 
|  |  | 
|  | /* new association get rid of ibss beacon skb */ | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  |  | 
|  | priv->ibss_beacon = NULL; | 
|  |  | 
|  | priv->beacon_int = priv->hw->conf.beacon_int; | 
|  | priv->timestamp1 = 0; | 
|  | priv->timestamp0 = 0; | 
|  | if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) | 
|  | priv->beacon_int = 0; | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | /* we are restarting association process | 
|  | * clear RXON_FILTER_ASSOC_MSK bit | 
|  | */ | 
|  | if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  | priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_commit_rxon(priv); | 
|  | } | 
|  |  | 
|  | /* Per mac80211.h: This is only used in IBSS mode... */ | 
|  | if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave - not in IBSS\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - not ready\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | priv->only_active_channel = 0; | 
|  |  | 
|  | iwl_set_rate(priv); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_tx_control *control) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | unsigned long flags; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211("enter\n"); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_MAC80211("leave - RF not ready\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { | 
|  | IWL_DEBUG_MAC80211("leave - not IBSS\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  |  | 
|  | priv->ibss_beacon = skb; | 
|  |  | 
|  | priv->assoc_id = 0; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | iwl_reset_qos(priv); | 
|  | #endif | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->post_associate.work); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | union ht_cap_info { | 
|  | struct { | 
|  | u16 advanced_coding_cap		:1; | 
|  | u16 supported_chan_width_set	:1; | 
|  | u16 mimo_power_save_mode	:2; | 
|  | u16 green_field			:1; | 
|  | u16 short_GI20			:1; | 
|  | u16 short_GI40			:1; | 
|  | u16 tx_stbc			:1; | 
|  | u16 rx_stbc			:1; | 
|  | u16 beam_forming		:1; | 
|  | u16 delayed_ba			:1; | 
|  | u16 maximal_amsdu_size		:1; | 
|  | u16 cck_mode_at_40MHz		:1; | 
|  | u16 psmp_support		:1; | 
|  | u16 stbc_ctrl_frame_support	:1; | 
|  | u16 sig_txop_protection_support	:1; | 
|  | }; | 
|  | u16 val; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | union ht_param_info{ | 
|  | struct { | 
|  | u8 max_rx_ampdu_factor	:2; | 
|  | u8 mpdu_density		:3; | 
|  | u8 reserved		:3; | 
|  | }; | 
|  | u8 val; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | union ht_exra_param_info { | 
|  | struct { | 
|  | u8 ext_chan_offset		:2; | 
|  | u8 tx_chan_width		:1; | 
|  | u8 rifs_mode			:1; | 
|  | u8 controlled_access_only	:1; | 
|  | u8 service_interval_granularity	:3; | 
|  | }; | 
|  | u8 val; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  | union ht_operation_mode{ | 
|  | struct { | 
|  | u16 op_mode	:2; | 
|  | u16 non_GF	:1; | 
|  | u16 reserved	:13; | 
|  | }; | 
|  | u16 val; | 
|  | } __attribute__ ((packed)); | 
|  |  | 
|  |  | 
|  | static int sta_ht_info_init(struct ieee80211_ht_capability *ht_cap, | 
|  | struct ieee80211_ht_additional_info *ht_extra, | 
|  | struct sta_ht_info *ht_info_ap, | 
|  | struct sta_ht_info *ht_info) | 
|  | { | 
|  | union ht_cap_info cap; | 
|  | union ht_operation_mode op_mode; | 
|  | union ht_param_info param_info; | 
|  | union ht_exra_param_info extra_param_info; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter: \n"); | 
|  |  | 
|  | if (!ht_info) { | 
|  | IWL_DEBUG_MAC80211("leave: ht_info is NULL\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (ht_cap) { | 
|  | cap.val = (u16) le16_to_cpu(ht_cap->capabilities_info); | 
|  | param_info.val = ht_cap->mac_ht_params_info; | 
|  | ht_info->is_ht = 1; | 
|  | if (cap.short_GI20) | 
|  | ht_info->sgf |= 0x1; | 
|  | if (cap.short_GI40) | 
|  | ht_info->sgf |= 0x2; | 
|  | ht_info->is_green_field = cap.green_field; | 
|  | ht_info->max_amsdu_size = cap.maximal_amsdu_size; | 
|  | ht_info->supported_chan_width = cap.supported_chan_width_set; | 
|  | ht_info->tx_mimo_ps_mode = cap.mimo_power_save_mode; | 
|  | memcpy(ht_info->supp_rates, ht_cap->supported_mcs_set, 16); | 
|  |  | 
|  | ht_info->ampdu_factor = param_info.max_rx_ampdu_factor; | 
|  | ht_info->mpdu_density = param_info.mpdu_density; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("SISO mask 0x%X MIMO mask 0x%X \n", | 
|  | ht_cap->supported_mcs_set[0], | 
|  | ht_cap->supported_mcs_set[1]); | 
|  |  | 
|  | if (ht_info_ap) { | 
|  | ht_info->control_channel = ht_info_ap->control_channel; | 
|  | ht_info->extension_chan_offset = | 
|  | ht_info_ap->extension_chan_offset; | 
|  | ht_info->tx_chan_width = ht_info_ap->tx_chan_width; | 
|  | ht_info->operating_mode = ht_info_ap->operating_mode; | 
|  | } | 
|  |  | 
|  | if (ht_extra) { | 
|  | extra_param_info.val = ht_extra->ht_param; | 
|  | ht_info->control_channel = ht_extra->control_chan; | 
|  | ht_info->extension_chan_offset = | 
|  | extra_param_info.ext_chan_offset; | 
|  | ht_info->tx_chan_width = extra_param_info.tx_chan_width; | 
|  | op_mode.val = (u16) | 
|  | le16_to_cpu(ht_extra->operation_mode); | 
|  | ht_info->operating_mode = op_mode.op_mode; | 
|  | IWL_DEBUG_MAC80211("control channel %d\n", | 
|  | ht_extra->control_chan); | 
|  | } | 
|  | } else | 
|  | ht_info->is_ht = 0; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_mac_conf_ht(struct ieee80211_hw *hw, | 
|  | struct ieee80211_ht_capability *ht_cap, | 
|  | struct ieee80211_ht_additional_info *ht_extra) | 
|  | { | 
|  | struct iwl_priv *priv = hw->priv; | 
|  | int rs; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter: \n"); | 
|  |  | 
|  | rs = sta_ht_info_init(ht_cap, ht_extra, NULL, &priv->current_assoc_ht); | 
|  | iwl4965_set_rxon_chain(priv); | 
|  |  | 
|  | if (priv && priv->assoc_id && | 
|  | (priv->iw_mode == IEEE80211_IF_TYPE_STA)) { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (priv->beacon_int) | 
|  | queue_work(priv->workqueue, &priv->post_associate.work); | 
|  | else | 
|  | priv->call_post_assoc_from_beacon = 1; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_MAC80211("leave: control channel %d\n", | 
|  | ht_extra->control_chan); | 
|  | return rs; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void iwl_set_ht_capab(struct ieee80211_hw *hw, | 
|  | struct ieee80211_ht_capability *ht_cap, | 
|  | u8 use_wide_chan) | 
|  | { | 
|  | union ht_cap_info cap; | 
|  | union ht_param_info param_info; | 
|  |  | 
|  | memset(&cap, 0, sizeof(union ht_cap_info)); | 
|  | memset(¶m_info, 0, sizeof(union ht_param_info)); | 
|  |  | 
|  | cap.maximal_amsdu_size = HT_IE_MAX_AMSDU_SIZE_4K; | 
|  | cap.green_field = 1; | 
|  | cap.short_GI20 = 1; | 
|  | cap.short_GI40 = 1; | 
|  | cap.supported_chan_width_set = use_wide_chan; | 
|  | cap.mimo_power_save_mode = 0x3; | 
|  |  | 
|  | param_info.max_rx_ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; | 
|  | param_info.mpdu_density = CFG_HT_MPDU_DENSITY_DEF; | 
|  | ht_cap->capabilities_info = (__le16) cpu_to_le16(cap.val); | 
|  | ht_cap->mac_ht_params_info = (u8) param_info.val; | 
|  |  | 
|  | ht_cap->supported_mcs_set[0] = 0xff; | 
|  | ht_cap->supported_mcs_set[1] = 0xff; | 
|  | ht_cap->supported_mcs_set[4] = | 
|  | (cap.supported_chan_width_set) ? 0x1: 0x0; | 
|  | } | 
|  |  | 
|  | static void iwl_mac_get_ht_capab(struct ieee80211_hw *hw, | 
|  | struct ieee80211_ht_capability *ht_cap) | 
|  | { | 
|  | u8 use_wide_channel = 1; | 
|  | struct iwl_priv *priv = hw->priv; | 
|  |  | 
|  | IWL_DEBUG_MAC80211("enter: \n"); | 
|  | if (priv->channel_width != IWL_CHANNEL_WIDTH_40MHZ) | 
|  | use_wide_channel = 0; | 
|  |  | 
|  | /* no fat tx allowed on 2.4GHZ */ | 
|  | if (priv->phymode != MODE_IEEE80211A) | 
|  | use_wide_channel = 0; | 
|  |  | 
|  | iwl_set_ht_capab(hw, ht_cap, use_wide_channel); | 
|  | IWL_DEBUG_MAC80211("leave: \n"); | 
|  | } | 
|  | #endif /*CONFIG_IWLWIFI_HT*/ | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * sysfs attributes | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  |  | 
|  | /* | 
|  | * The following adds a new attribute to the sysfs representation | 
|  | * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) | 
|  | * used for controlling the debug level. | 
|  | * | 
|  | * See the level definitions in iwl for details. | 
|  | */ | 
|  |  | 
|  | static ssize_t show_debug_level(struct device_driver *d, char *buf) | 
|  | { | 
|  | return sprintf(buf, "0x%08X\n", iwl_debug_level); | 
|  | } | 
|  | static ssize_t store_debug_level(struct device_driver *d, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | char *p = (char *)buf; | 
|  | u32 val; | 
|  |  | 
|  | val = simple_strtoul(p, &p, 0); | 
|  | if (p == buf) | 
|  | printk(KERN_INFO DRV_NAME | 
|  | ": %s is not in hex or decimal form.\n", buf); | 
|  | else | 
|  | iwl_debug_level = val; | 
|  |  | 
|  | return strnlen(buf, count); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, | 
|  | show_debug_level, store_debug_level); | 
|  |  | 
|  | #endif /* CONFIG_IWLWIFI_DEBUG */ | 
|  |  | 
|  | static ssize_t show_rf_kill(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | /* | 
|  | * 0 - RF kill not enabled | 
|  | * 1 - SW based RF kill active (sysfs) | 
|  | * 2 - HW based RF kill active | 
|  | * 3 - Both HW and SW based RF kill active | 
|  | */ | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) | | 
|  | (test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0); | 
|  |  | 
|  | return sprintf(buf, "%i\n", val); | 
|  | } | 
|  |  | 
|  | static ssize_t store_rf_kill(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_radio_kill_sw(priv, buf[0] == '1'); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill); | 
|  |  | 
|  | static ssize_t show_temperature(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  |  | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | return sprintf(buf, "%d\n", iwl_hw_get_temperature(priv)); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); | 
|  |  | 
|  | static ssize_t show_rs_window(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = d->driver_data; | 
|  | return iwl_fill_rs_info(priv->hw, buf, IWL_AP_ID); | 
|  | } | 
|  | static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL); | 
|  |  | 
|  | static ssize_t show_tx_power(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | return sprintf(buf, "%d\n", priv->user_txpower_limit); | 
|  | } | 
|  |  | 
|  | static ssize_t store_tx_power(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | char *p = (char *)buf; | 
|  | u32 val; | 
|  |  | 
|  | val = simple_strtoul(p, &p, 10); | 
|  | if (p == buf) | 
|  | printk(KERN_INFO DRV_NAME | 
|  | ": %s is not in decimal form.\n", buf); | 
|  | else | 
|  | iwl_hw_reg_set_txpower(priv, val); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); | 
|  |  | 
|  | static ssize_t show_flags(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  |  | 
|  | return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); | 
|  | } | 
|  |  | 
|  | static ssize_t store_flags(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | u32 flags = simple_strtoul(buf, NULL, 0); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (le32_to_cpu(priv->staging_rxon.flags) != flags) { | 
|  | /* Cancel any currently running scans... */ | 
|  | if (iwl_scan_cancel_timeout(priv, 100)) | 
|  | IWL_WARNING("Could not cancel scan.\n"); | 
|  | else { | 
|  | IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", | 
|  | flags); | 
|  | priv->staging_rxon.flags = cpu_to_le32(flags); | 
|  | iwl_commit_rxon(priv); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); | 
|  |  | 
|  | static ssize_t show_filter_flags(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  |  | 
|  | return sprintf(buf, "0x%04X\n", | 
|  | le32_to_cpu(priv->active_rxon.filter_flags)); | 
|  | } | 
|  |  | 
|  | static ssize_t store_filter_flags(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | u32 filter_flags = simple_strtoul(buf, NULL, 0); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { | 
|  | /* Cancel any currently running scans... */ | 
|  | if (iwl_scan_cancel_timeout(priv, 100)) | 
|  | IWL_WARNING("Could not cancel scan.\n"); | 
|  | else { | 
|  | IWL_DEBUG_INFO("Committing rxon.filter_flags = " | 
|  | "0x%04X\n", filter_flags); | 
|  | priv->staging_rxon.filter_flags = | 
|  | cpu_to_le32(filter_flags); | 
|  | iwl_commit_rxon(priv); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, | 
|  | store_filter_flags); | 
|  |  | 
|  | static ssize_t show_tune(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  |  | 
|  | return sprintf(buf, "0x%04X\n", | 
|  | (priv->phymode << 8) | | 
|  | le16_to_cpu(priv->active_rxon.channel)); | 
|  | } | 
|  |  | 
|  | static void iwl_set_flags_for_phymode(struct iwl_priv *priv, u8 phymode); | 
|  |  | 
|  | static ssize_t store_tune(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | char *p = (char *)buf; | 
|  | u16 tune = simple_strtoul(p, &p, 0); | 
|  | u8 phymode = (tune >> 8) & 0xff; | 
|  | u16 channel = tune & 0xff; | 
|  |  | 
|  | IWL_DEBUG_INFO("Tune request to:%d channel:%d\n", phymode, channel); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if ((le16_to_cpu(priv->staging_rxon.channel) != channel) || | 
|  | (priv->phymode != phymode)) { | 
|  | const struct iwl_channel_info *ch_info; | 
|  |  | 
|  | ch_info = iwl_get_channel_info(priv, phymode, channel); | 
|  | if (!ch_info) { | 
|  | IWL_WARNING("Requested invalid phymode/channel " | 
|  | "combination: %d %d\n", phymode, channel); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Cancel any currently running scans... */ | 
|  | if (iwl_scan_cancel_timeout(priv, 100)) | 
|  | IWL_WARNING("Could not cancel scan.\n"); | 
|  | else { | 
|  | IWL_DEBUG_INFO("Committing phymode and " | 
|  | "rxon.channel = %d %d\n", | 
|  | phymode, channel); | 
|  |  | 
|  | iwl_set_rxon_channel(priv, phymode, channel); | 
|  | iwl_set_flags_for_phymode(priv, phymode); | 
|  |  | 
|  | iwl_set_rate(priv); | 
|  | iwl_commit_rxon(priv); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(tune, S_IWUSR | S_IRUGO, show_tune, store_tune); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT | 
|  |  | 
|  | static ssize_t show_measurement(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | struct iwl_spectrum_notification measure_report; | 
|  | u32 size = sizeof(measure_report), len = 0, ofs = 0; | 
|  | u8 *data = (u8 *) & measure_report; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (!(priv->measurement_status & MEASUREMENT_READY)) { | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | return 0; | 
|  | } | 
|  | memcpy(&measure_report, &priv->measure_report, size); | 
|  | priv->measurement_status = 0; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | while (size && (PAGE_SIZE - len)) { | 
|  | hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, | 
|  | PAGE_SIZE - len, 1); | 
|  | len = strlen(buf); | 
|  | if (PAGE_SIZE - len) | 
|  | buf[len++] = '\n'; | 
|  |  | 
|  | ofs += 16; | 
|  | size -= min(size, 16U); | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t store_measurement(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | struct ieee80211_measurement_params params = { | 
|  | .channel = le16_to_cpu(priv->active_rxon.channel), | 
|  | .start_time = cpu_to_le64(priv->last_tsf), | 
|  | .duration = cpu_to_le16(1), | 
|  | }; | 
|  | u8 type = IWL_MEASURE_BASIC; | 
|  | u8 buffer[32]; | 
|  | u8 channel; | 
|  |  | 
|  | if (count) { | 
|  | char *p = buffer; | 
|  | strncpy(buffer, buf, min(sizeof(buffer), count)); | 
|  | channel = simple_strtoul(p, NULL, 0); | 
|  | if (channel) | 
|  | params.channel = channel; | 
|  |  | 
|  | p = buffer; | 
|  | while (*p && *p != ' ') | 
|  | p++; | 
|  | if (*p) | 
|  | type = simple_strtoul(p + 1, NULL, 0); | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("Invoking measurement of type %d on " | 
|  | "channel %d (for '%s')\n", type, params.channel, buf); | 
|  | iwl_get_measurement(priv, ¶ms, type); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, | 
|  | show_measurement, store_measurement); | 
|  | #endif /* CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT */ | 
|  |  | 
|  | static ssize_t store_retry_rate(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  |  | 
|  | priv->retry_rate = simple_strtoul(buf, NULL, 0); | 
|  | if (priv->retry_rate <= 0) | 
|  | priv->retry_rate = 1; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_retry_rate(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | return sprintf(buf, "%d", priv->retry_rate); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, | 
|  | store_retry_rate); | 
|  |  | 
|  | static ssize_t store_power_level(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | int rc; | 
|  | int mode; | 
|  |  | 
|  | mode = simple_strtoul(buf, NULL, 0); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (!iwl_is_ready(priv)) { | 
|  | rc = -EAGAIN; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC)) | 
|  | mode = IWL_POWER_AC; | 
|  | else | 
|  | mode |= IWL_POWER_ENABLED; | 
|  |  | 
|  | if (mode != priv->power_mode) { | 
|  | rc = iwl_send_power_mode(priv, IWL_POWER_LEVEL(mode)); | 
|  | if (rc) { | 
|  | IWL_DEBUG_MAC80211("failed setting power mode.\n"); | 
|  | goto out; | 
|  | } | 
|  | priv->power_mode = mode; | 
|  | } | 
|  |  | 
|  | rc = count; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | #define MAX_WX_STRING 80 | 
|  |  | 
|  | /* Values are in microsecond */ | 
|  | static const s32 timeout_duration[] = { | 
|  | 350000, | 
|  | 250000, | 
|  | 75000, | 
|  | 37000, | 
|  | 25000, | 
|  | }; | 
|  | static const s32 period_duration[] = { | 
|  | 400000, | 
|  | 700000, | 
|  | 1000000, | 
|  | 1000000, | 
|  | 1000000 | 
|  | }; | 
|  |  | 
|  | static ssize_t show_power_level(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | int level = IWL_POWER_LEVEL(priv->power_mode); | 
|  | char *p = buf; | 
|  |  | 
|  | p += sprintf(p, "%d ", level); | 
|  | switch (level) { | 
|  | case IWL_POWER_MODE_CAM: | 
|  | case IWL_POWER_AC: | 
|  | p += sprintf(p, "(AC)"); | 
|  | break; | 
|  | case IWL_POWER_BATTERY: | 
|  | p += sprintf(p, "(BATTERY)"); | 
|  | break; | 
|  | default: | 
|  | p += sprintf(p, | 
|  | "(Timeout %dms, Period %dms)", | 
|  | timeout_duration[level - 1] / 1000, | 
|  | period_duration[level - 1] / 1000); | 
|  | } | 
|  |  | 
|  | if (!(priv->power_mode & IWL_POWER_ENABLED)) | 
|  | p += sprintf(p, " OFF\n"); | 
|  | else | 
|  | p += sprintf(p, " \n"); | 
|  |  | 
|  | return (p - buf + 1); | 
|  |  | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, | 
|  | store_power_level); | 
|  |  | 
|  | static ssize_t show_channels(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | int len = 0, i; | 
|  | struct ieee80211_channel *channels = NULL; | 
|  | const struct ieee80211_hw_mode *hw_mode = NULL; | 
|  | int count = 0; | 
|  |  | 
|  | if (!iwl_is_ready(priv)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | hw_mode = iwl_get_hw_mode(priv, MODE_IEEE80211G); | 
|  | if (!hw_mode) | 
|  | hw_mode = iwl_get_hw_mode(priv, MODE_IEEE80211B); | 
|  | if (hw_mode) { | 
|  | channels = hw_mode->channels; | 
|  | count = hw_mode->num_channels; | 
|  | } | 
|  |  | 
|  | len += | 
|  | sprintf(&buf[len], | 
|  | "Displaying %d channels in 2.4GHz band " | 
|  | "(802.11bg):\n", count); | 
|  |  | 
|  | for (i = 0; i < count; i++) | 
|  | len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", | 
|  | channels[i].chan, | 
|  | channels[i].power_level, | 
|  | channels[i]. | 
|  | flag & IEEE80211_CHAN_W_RADAR_DETECT ? | 
|  | " (IEEE 802.11h required)" : "", | 
|  | (!(channels[i].flag & IEEE80211_CHAN_W_IBSS) | 
|  | || (channels[i]. | 
|  | flag & | 
|  | IEEE80211_CHAN_W_RADAR_DETECT)) ? "" : | 
|  | ", IBSS", | 
|  | channels[i]. | 
|  | flag & IEEE80211_CHAN_W_ACTIVE_SCAN ? | 
|  | "active/passive" : "passive only"); | 
|  |  | 
|  | hw_mode = iwl_get_hw_mode(priv, MODE_IEEE80211A); | 
|  | if (hw_mode) { | 
|  | channels = hw_mode->channels; | 
|  | count = hw_mode->num_channels; | 
|  | } else { | 
|  | channels = NULL; | 
|  | count = 0; | 
|  | } | 
|  |  | 
|  | len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band " | 
|  | "(802.11a):\n", count); | 
|  |  | 
|  | for (i = 0; i < count; i++) | 
|  | len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", | 
|  | channels[i].chan, | 
|  | channels[i].power_level, | 
|  | channels[i]. | 
|  | flag & IEEE80211_CHAN_W_RADAR_DETECT ? | 
|  | " (IEEE 802.11h required)" : "", | 
|  | (!(channels[i].flag & IEEE80211_CHAN_W_IBSS) | 
|  | || (channels[i]. | 
|  | flag & | 
|  | IEEE80211_CHAN_W_RADAR_DETECT)) ? "" : | 
|  | ", IBSS", | 
|  | channels[i]. | 
|  | flag & IEEE80211_CHAN_W_ACTIVE_SCAN ? | 
|  | "active/passive" : "passive only"); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); | 
|  |  | 
|  | static ssize_t show_statistics(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  | u32 size = sizeof(struct iwl_notif_statistics); | 
|  | u32 len = 0, ofs = 0; | 
|  | u8 *data = (u8 *) & priv->statistics; | 
|  | int rc = 0; | 
|  |  | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | rc = iwl_send_statistics_request(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | if (rc) { | 
|  | len = sprintf(buf, | 
|  | "Error sending statistics request: 0x%08X\n", rc); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | while (size && (PAGE_SIZE - len)) { | 
|  | hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, | 
|  | PAGE_SIZE - len, 1); | 
|  | len = strlen(buf); | 
|  | if (PAGE_SIZE - len) | 
|  | buf[len++] = '\n'; | 
|  |  | 
|  | ofs += 16; | 
|  | size -= min(size, 16U); | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); | 
|  |  | 
|  | static ssize_t show_antenna(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  |  | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | return sprintf(buf, "%d\n", priv->antenna); | 
|  | } | 
|  |  | 
|  | static ssize_t store_antenna(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int ant; | 
|  | struct iwl_priv *priv = dev_get_drvdata(d); | 
|  |  | 
|  | if (count == 0) | 
|  | return 0; | 
|  |  | 
|  | if (sscanf(buf, "%1i", &ant) != 1) { | 
|  | IWL_DEBUG_INFO("not in hex or decimal form.\n"); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | if ((ant >= 0) && (ant <= 2)) { | 
|  | IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant); | 
|  | priv->antenna = (enum iwl_antenna)ant; | 
|  | } else | 
|  | IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant); | 
|  |  | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); | 
|  |  | 
|  | static ssize_t show_status(struct device *d, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -EAGAIN; | 
|  | return sprintf(buf, "0x%08x\n", (int)priv->status); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); | 
|  |  | 
|  | static ssize_t dump_error_log(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | char *p = (char *)buf; | 
|  |  | 
|  | if (p[0] == '1') | 
|  | iwl_dump_nic_error_log((struct iwl_priv *)d->driver_data); | 
|  |  | 
|  | return strnlen(buf, count); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); | 
|  |  | 
|  | static ssize_t dump_event_log(struct device *d, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | char *p = (char *)buf; | 
|  |  | 
|  | if (p[0] == '1') | 
|  | iwl_dump_nic_event_log((struct iwl_priv *)d->driver_data); | 
|  |  | 
|  | return strnlen(buf, count); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * driver setup and teardown | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static void iwl_setup_deferred_work(struct iwl_priv *priv) | 
|  | { | 
|  | priv->workqueue = create_workqueue(DRV_NAME); | 
|  |  | 
|  | init_waitqueue_head(&priv->wait_command_queue); | 
|  |  | 
|  | INIT_WORK(&priv->up, iwl_bg_up); | 
|  | INIT_WORK(&priv->restart, iwl_bg_restart); | 
|  | INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish); | 
|  | INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); | 
|  | INIT_WORK(&priv->request_scan, iwl_bg_request_scan); | 
|  | INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); | 
|  | INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill); | 
|  | INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); | 
|  | INIT_DELAYED_WORK(&priv->post_associate, iwl_bg_post_associate); | 
|  | INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); | 
|  | INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); | 
|  | INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); | 
|  |  | 
|  | iwl_hw_setup_deferred_work(priv); | 
|  |  | 
|  | tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) | 
|  | iwl_irq_tasklet, (unsigned long)priv); | 
|  | } | 
|  |  | 
|  | static void iwl_cancel_deferred_work(struct iwl_priv *priv) | 
|  | { | 
|  | iwl_hw_cancel_deferred_work(priv); | 
|  |  | 
|  | cancel_delayed_work_sync(&priv->init_alive_start); | 
|  | cancel_delayed_work(&priv->scan_check); | 
|  | cancel_delayed_work(&priv->alive_start); | 
|  | cancel_delayed_work(&priv->post_associate); | 
|  | cancel_work_sync(&priv->beacon_update); | 
|  | } | 
|  |  | 
|  | static struct attribute *iwl_sysfs_entries[] = { | 
|  | &dev_attr_antenna.attr, | 
|  | &dev_attr_channels.attr, | 
|  | &dev_attr_dump_errors.attr, | 
|  | &dev_attr_dump_events.attr, | 
|  | &dev_attr_flags.attr, | 
|  | &dev_attr_filter_flags.attr, | 
|  | #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT | 
|  | &dev_attr_measurement.attr, | 
|  | #endif | 
|  | &dev_attr_power_level.attr, | 
|  | &dev_attr_retry_rate.attr, | 
|  | &dev_attr_rf_kill.attr, | 
|  | &dev_attr_rs_window.attr, | 
|  | &dev_attr_statistics.attr, | 
|  | &dev_attr_status.attr, | 
|  | &dev_attr_temperature.attr, | 
|  | &dev_attr_tune.attr, | 
|  | &dev_attr_tx_power.attr, | 
|  |  | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute_group iwl_attribute_group = { | 
|  | .name = NULL,		/* put in device directory */ | 
|  | .attrs = iwl_sysfs_entries, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_ops iwl_hw_ops = { | 
|  | .tx = iwl_mac_tx, | 
|  | .start = iwl_mac_start, | 
|  | .stop = iwl_mac_stop, | 
|  | .add_interface = iwl_mac_add_interface, | 
|  | .remove_interface = iwl_mac_remove_interface, | 
|  | .config = iwl_mac_config, | 
|  | .config_interface = iwl_mac_config_interface, | 
|  | .configure_filter = iwl_configure_filter, | 
|  | .set_key = iwl_mac_set_key, | 
|  | .get_stats = iwl_mac_get_stats, | 
|  | .get_tx_stats = iwl_mac_get_tx_stats, | 
|  | .conf_tx = iwl_mac_conf_tx, | 
|  | .get_tsf = iwl_mac_get_tsf, | 
|  | .reset_tsf = iwl_mac_reset_tsf, | 
|  | .beacon_update = iwl_mac_beacon_update, | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | .conf_ht = iwl_mac_conf_ht, | 
|  | .get_ht_capab = iwl_mac_get_ht_capab, | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | .ht_tx_agg_start = iwl_mac_ht_tx_agg_start, | 
|  | .ht_tx_agg_stop = iwl_mac_ht_tx_agg_stop, | 
|  | .ht_rx_agg_start = iwl_mac_ht_rx_agg_start, | 
|  | .ht_rx_agg_stop = iwl_mac_ht_rx_agg_stop, | 
|  | #endif  /* CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif  /* CONFIG_IWLWIFI_HT */ | 
|  | .hw_scan = iwl_mac_hw_scan | 
|  | }; | 
|  |  | 
|  | static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | 
|  | { | 
|  | int err = 0; | 
|  | struct iwl_priv *priv; | 
|  | struct ieee80211_hw *hw; | 
|  | int i; | 
|  |  | 
|  | if (iwl_param_disable_hw_scan) { | 
|  | IWL_DEBUG_INFO("Disabling hw_scan\n"); | 
|  | iwl_hw_ops.hw_scan = NULL; | 
|  | } | 
|  |  | 
|  | if ((iwl_param_queues_num > IWL_MAX_NUM_QUEUES) || | 
|  | (iwl_param_queues_num < IWL_MIN_NUM_QUEUES)) { | 
|  | IWL_ERROR("invalid queues_num, should be between %d and %d\n", | 
|  | IWL_MIN_NUM_QUEUES, IWL_MAX_NUM_QUEUES); | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* mac80211 allocates memory for this device instance, including | 
|  | *   space for this driver's private structure */ | 
|  | hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwl_hw_ops); | 
|  | if (hw == NULL) { | 
|  | IWL_ERROR("Can not allocate network device\n"); | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | SET_IEEE80211_DEV(hw, &pdev->dev); | 
|  |  | 
|  | hw->rate_control_algorithm = "iwl-4965-rs"; | 
|  |  | 
|  | IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); | 
|  | priv = hw->priv; | 
|  | priv->hw = hw; | 
|  |  | 
|  | priv->pci_dev = pdev; | 
|  | priv->antenna = (enum iwl_antenna)iwl_param_antenna; | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | iwl_debug_level = iwl_param_debug; | 
|  | atomic_set(&priv->restrict_refcnt, 0); | 
|  | #endif | 
|  | priv->retry_rate = 1; | 
|  |  | 
|  | priv->ibss_beacon = NULL; | 
|  |  | 
|  | /* Tell mac80211 and its clients (e.g. Wireless Extensions) | 
|  | *   the range of signal quality values that we'll provide. | 
|  | * Negative values for level/noise indicate that we'll provide dBm. | 
|  | * For WE, at least, non-0 values here *enable* display of values | 
|  | *   in app (iwconfig). */ | 
|  | hw->max_rssi = -20;	/* signal level, negative indicates dBm */ | 
|  | hw->max_noise = -20;	/* noise level, negative indicates dBm */ | 
|  | hw->max_signal = 100;	/* link quality indication (%) */ | 
|  |  | 
|  | /* Tell mac80211 our Tx characteristics */ | 
|  | hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE; | 
|  |  | 
|  | hw->queues = 4; | 
|  | #ifdef CONFIG_IWLWIFI_HT | 
|  | #ifdef CONFIG_IWLWIFI_HT_AGG | 
|  | hw->queues = 16; | 
|  | #endif /* CONFIG_IWLWIFI_HT_AGG */ | 
|  | #endif /* CONFIG_IWLWIFI_HT */ | 
|  |  | 
|  | spin_lock_init(&priv->lock); | 
|  | spin_lock_init(&priv->power_data.lock); | 
|  | spin_lock_init(&priv->sta_lock); | 
|  | spin_lock_init(&priv->hcmd_lock); | 
|  | spin_lock_init(&priv->lq_mngr.lock); | 
|  |  | 
|  | for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) | 
|  | INIT_LIST_HEAD(&priv->ibss_mac_hash[i]); | 
|  |  | 
|  | INIT_LIST_HEAD(&priv->free_frames); | 
|  |  | 
|  | mutex_init(&priv->mutex); | 
|  | if (pci_enable_device(pdev)) { | 
|  | err = -ENODEV; | 
|  | goto out_ieee80211_free_hw; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | priv->data_retry_limit = -1; | 
|  | priv->ieee_channels = NULL; | 
|  | priv->ieee_rates = NULL; | 
|  | priv->phymode = -1; | 
|  |  | 
|  | err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (!err) | 
|  | err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (err) { | 
|  | printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n"); | 
|  | goto out_pci_disable_device; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, priv); | 
|  | err = pci_request_regions(pdev, DRV_NAME); | 
|  | if (err) | 
|  | goto out_pci_disable_device; | 
|  | /* We disable the RETRY_TIMEOUT register (0x41) to keep | 
|  | * PCI Tx retries from interfering with C3 CPU state */ | 
|  | pci_write_config_byte(pdev, 0x41, 0x00); | 
|  | priv->hw_base = pci_iomap(pdev, 0, 0); | 
|  | if (!priv->hw_base) { | 
|  | err = -ENODEV; | 
|  | goto out_pci_release_regions; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n", | 
|  | (unsigned long long) pci_resource_len(pdev, 0)); | 
|  | IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); | 
|  |  | 
|  | /* Initialize module parameter values here */ | 
|  |  | 
|  | if (iwl_param_disable) { | 
|  | set_bit(STATUS_RF_KILL_SW, &priv->status); | 
|  | IWL_DEBUG_INFO("Radio disabled.\n"); | 
|  | } | 
|  |  | 
|  | priv->iw_mode = IEEE80211_IF_TYPE_STA; | 
|  |  | 
|  | priv->ps_mode = 0; | 
|  | priv->use_ant_b_for_management_frame = 1; /* start with ant B */ | 
|  | priv->is_ht_enabled = 1; | 
|  | priv->channel_width = IWL_CHANNEL_WIDTH_40MHZ; | 
|  | priv->valid_antenna = 0x7;	/* assume all 3 connected */ | 
|  | priv->ps_mode = IWL_MIMO_PS_NONE; | 
|  | priv->cck_power_index_compensation = iwl_read32( | 
|  | priv, CSR_HW_REV_WA_REG); | 
|  |  | 
|  | iwl4965_set_rxon_chain(priv); | 
|  |  | 
|  | printk(KERN_INFO DRV_NAME | 
|  | ": Detected Intel Wireless WiFi Link 4965AGN\n"); | 
|  |  | 
|  | /* Device-specific setup */ | 
|  | if (iwl_hw_set_hw_setting(priv)) { | 
|  | IWL_ERROR("failed to set hw settings\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | goto out_iounmap; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_QOS | 
|  | if (iwl_param_qos_enable) | 
|  | priv->qos_data.qos_enable = 1; | 
|  |  | 
|  | iwl_reset_qos(priv); | 
|  |  | 
|  | priv->qos_data.qos_active = 0; | 
|  | priv->qos_data.qos_cap.val = 0; | 
|  | #endif /* CONFIG_IWLWIFI_QOS */ | 
|  |  | 
|  | iwl_set_rxon_channel(priv, MODE_IEEE80211G, 6); | 
|  | iwl_setup_deferred_work(priv); | 
|  | iwl_setup_rx_handlers(priv); | 
|  |  | 
|  | priv->rates_mask = IWL_RATES_MASK; | 
|  | /* If power management is turned on, default to AC mode */ | 
|  | priv->power_mode = IWL_POWER_AC; | 
|  | priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; | 
|  |  | 
|  | pci_enable_msi(pdev); | 
|  |  | 
|  | err = request_irq(pdev->irq, iwl_isr, IRQF_SHARED, DRV_NAME, priv); | 
|  | if (err) { | 
|  | IWL_ERROR("Error allocating IRQ %d\n", pdev->irq); | 
|  | goto out_disable_msi; | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group); | 
|  | if (err) { | 
|  | IWL_ERROR("failed to create sysfs device attributes\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | goto out_release_irq; | 
|  | } | 
|  |  | 
|  | /* fetch ucode file from disk, alloc and copy to bus-master buffers ... | 
|  | * ucode filename and max sizes are card-specific. */ | 
|  | err = iwl_read_ucode(priv); | 
|  | if (err) { | 
|  | IWL_ERROR("Could not read microcode: %d\n", err); | 
|  | mutex_unlock(&priv->mutex); | 
|  | goto out_pci_alloc; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_INFO("Queing UP work.\n"); | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->up); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_pci_alloc: | 
|  | iwl_dealloc_ucode_pci(priv); | 
|  |  | 
|  | sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); | 
|  |  | 
|  | out_release_irq: | 
|  | free_irq(pdev->irq, priv); | 
|  |  | 
|  | out_disable_msi: | 
|  | pci_disable_msi(pdev); | 
|  | destroy_workqueue(priv->workqueue); | 
|  | priv->workqueue = NULL; | 
|  | iwl_unset_hw_setting(priv); | 
|  |  | 
|  | out_iounmap: | 
|  | pci_iounmap(pdev, priv->hw_base); | 
|  | out_pci_release_regions: | 
|  | pci_release_regions(pdev); | 
|  | out_pci_disable_device: | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | out_ieee80211_free_hw: | 
|  | ieee80211_free_hw(priv->hw); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void iwl_pci_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct iwl_priv *priv = pci_get_drvdata(pdev); | 
|  | struct list_head *p, *q; | 
|  | int i; | 
|  |  | 
|  | if (!priv) | 
|  | return; | 
|  |  | 
|  | IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); | 
|  |  | 
|  | set_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | iwl_down(priv); | 
|  |  | 
|  | /* Free MAC hash list for ADHOC */ | 
|  | for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) { | 
|  | list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) { | 
|  | list_del(p); | 
|  | kfree(list_entry(p, struct iwl_ibss_seq, list)); | 
|  | } | 
|  | } | 
|  |  | 
|  | sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); | 
|  |  | 
|  | iwl_dealloc_ucode_pci(priv); | 
|  |  | 
|  | if (priv->rxq.bd) | 
|  | iwl_rx_queue_free(priv, &priv->rxq); | 
|  | iwl_hw_txq_ctx_free(priv); | 
|  |  | 
|  | iwl_unset_hw_setting(priv); | 
|  | iwl_clear_stations_table(priv); | 
|  |  | 
|  | if (priv->mac80211_registered) { | 
|  | ieee80211_unregister_hw(priv->hw); | 
|  | iwl_rate_control_unregister(priv->hw); | 
|  | } | 
|  |  | 
|  | /*netif_stop_queue(dev); */ | 
|  | flush_workqueue(priv->workqueue); | 
|  |  | 
|  | /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes | 
|  | * priv->workqueue... so we can't take down the workqueue | 
|  | * until now... */ | 
|  | destroy_workqueue(priv->workqueue); | 
|  | priv->workqueue = NULL; | 
|  |  | 
|  | free_irq(pdev->irq, priv); | 
|  | pci_disable_msi(pdev); | 
|  | pci_iounmap(pdev, priv->hw_base); | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  |  | 
|  | kfree(priv->channel_info); | 
|  |  | 
|  | kfree(priv->ieee_channels); | 
|  | kfree(priv->ieee_rates); | 
|  |  | 
|  | if (priv->ibss_beacon) | 
|  | dev_kfree_skb(priv->ibss_beacon); | 
|  |  | 
|  | ieee80211_free_hw(priv->hw); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | struct iwl_priv *priv = pci_get_drvdata(pdev); | 
|  |  | 
|  | set_bit(STATUS_IN_SUSPEND, &priv->status); | 
|  |  | 
|  | /* Take down the device; powers it off, etc. */ | 
|  | iwl_down(priv); | 
|  |  | 
|  | if (priv->mac80211_registered) | 
|  | ieee80211_stop_queues(priv->hw); | 
|  |  | 
|  | pci_save_state(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_power_state(pdev, PCI_D3hot); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_resume(struct iwl_priv *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | /* The following it a temporary work around due to the | 
|  | * suspend / resume not fully initializing the NIC correctly. | 
|  | * Without all of the following, resume will not attempt to take | 
|  | * down the NIC (it shouldn't really need to) and will just try | 
|  | * and bring the NIC back up.  However that fails during the | 
|  | * ucode verification process.  This then causes iwl_down to be | 
|  | * called *after* iwl_hw_nic_init() has succeeded -- which | 
|  | * then lets the next init sequence succeed.  So, we've | 
|  | * replicated all of that NIC init code here... */ | 
|  |  | 
|  | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | 
|  |  | 
|  | iwl_hw_nic_init(priv); | 
|  |  | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | 
|  | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | 
|  | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | 
|  |  | 
|  | /* tell the device to stop sending interrupts */ | 
|  | iwl_disable_interrupts(priv); | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); | 
|  |  | 
|  | if (!iwl_grab_restricted_access(priv)) { | 
|  | iwl_write_restricted_reg(priv, APMG_CLK_DIS_REG, | 
|  | APMG_CLK_VAL_DMA_CLK_RQT); | 
|  | iwl_release_restricted_access(priv); | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | udelay(5); | 
|  |  | 
|  | iwl_hw_nic_reset(priv); | 
|  |  | 
|  | /* Bring the device back up */ | 
|  | clear_bit(STATUS_IN_SUSPEND, &priv->status); | 
|  | queue_work(priv->workqueue, &priv->up); | 
|  | } | 
|  |  | 
|  | static int iwl_pci_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct iwl_priv *priv = pci_get_drvdata(pdev); | 
|  | int err; | 
|  |  | 
|  | printk(KERN_INFO "Coming out of suspend...\n"); | 
|  |  | 
|  | pci_set_power_state(pdev, PCI_D0); | 
|  | err = pci_enable_device(pdev); | 
|  | pci_restore_state(pdev); | 
|  |  | 
|  | /* | 
|  | * Suspend/Resume resets the PCI configuration space, so we have to | 
|  | * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries | 
|  | * from interfering with C3 CPU state. pci_restore_state won't help | 
|  | * here since it only restores the first 64 bytes pci config header. | 
|  | */ | 
|  | pci_write_config_byte(pdev, 0x41, 0x00); | 
|  |  | 
|  | iwl_resume(priv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * driver and module entry point | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static struct pci_driver iwl_driver = { | 
|  | .name = DRV_NAME, | 
|  | .id_table = iwl_hw_card_ids, | 
|  | .probe = iwl_pci_probe, | 
|  | .remove = __devexit_p(iwl_pci_remove), | 
|  | #ifdef CONFIG_PM | 
|  | .suspend = iwl_pci_suspend, | 
|  | .resume = iwl_pci_resume, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __init iwl_init(void) | 
|  | { | 
|  |  | 
|  | int ret; | 
|  | printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); | 
|  | printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); | 
|  | ret = pci_register_driver(&iwl_driver); | 
|  | if (ret) { | 
|  | IWL_ERROR("Unable to initialize PCI module\n"); | 
|  | return ret; | 
|  | } | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | ret = driver_create_file(&iwl_driver.driver, &driver_attr_debug_level); | 
|  | if (ret) { | 
|  | IWL_ERROR("Unable to create driver sysfs file\n"); | 
|  | pci_unregister_driver(&iwl_driver); | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit iwl_exit(void) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | driver_remove_file(&iwl_driver.driver, &driver_attr_debug_level); | 
|  | #endif | 
|  | pci_unregister_driver(&iwl_driver); | 
|  | } | 
|  |  | 
|  | module_param_named(antenna, iwl_param_antenna, int, 0444); | 
|  | MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); | 
|  | module_param_named(disable, iwl_param_disable, int, 0444); | 
|  | MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); | 
|  | module_param_named(hwcrypto, iwl_param_hwcrypto, int, 0444); | 
|  | MODULE_PARM_DESC(hwcrypto, | 
|  | "using hardware crypto engine (default 0 [software])\n"); | 
|  | module_param_named(debug, iwl_param_debug, int, 0444); | 
|  | MODULE_PARM_DESC(debug, "debug output mask"); | 
|  | module_param_named(disable_hw_scan, iwl_param_disable_hw_scan, int, 0444); | 
|  | MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); | 
|  |  | 
|  | module_param_named(queues_num, iwl_param_queues_num, int, 0444); | 
|  | MODULE_PARM_DESC(queues_num, "number of hw queues."); | 
|  |  | 
|  | /* QoS */ | 
|  | module_param_named(qos_enable, iwl_param_qos_enable, int, 0444); | 
|  | MODULE_PARM_DESC(qos_enable, "enable all QoS functionality"); | 
|  |  | 
|  | module_exit(iwl_exit); | 
|  | module_init(iwl_init); |