| /* pcnet32.c: An AMD PCnet32 ethernet driver for linux. */ | 
 | /* | 
 |  *	Copyright 1996-1999 Thomas Bogendoerfer | 
 |  * | 
 |  *	Derived from the lance driver written 1993,1994,1995 by Donald Becker. | 
 |  * | 
 |  *	Copyright 1993 United States Government as represented by the | 
 |  *	Director, National Security Agency. | 
 |  * | 
 |  *	This software may be used and distributed according to the terms | 
 |  *	of the GNU General Public License, incorporated herein by reference. | 
 |  * | 
 |  *	This driver is for PCnet32 and PCnetPCI based ethercards | 
 |  */ | 
 | /************************************************************************** | 
 |  *  23 Oct, 2000. | 
 |  *  Fixed a few bugs, related to running the controller in 32bit mode. | 
 |  * | 
 |  *  Carsten Langgaard, carstenl@mips.com | 
 |  *  Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved. | 
 |  * | 
 |  *************************************************************************/ | 
 |  | 
 | #define DRV_NAME	"pcnet32" | 
 | #define DRV_VERSION	"1.32" | 
 | #define DRV_RELDATE	"18.Mar.2006" | 
 | #define PFX		DRV_NAME ": " | 
 |  | 
 | static const char *const version = | 
 |     DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n"; | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/string.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include <asm/dma.h> | 
 | #include <asm/io.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/irq.h> | 
 |  | 
 | /* | 
 |  * PCI device identifiers for "new style" Linux PCI Device Drivers | 
 |  */ | 
 | static struct pci_device_id pcnet32_pci_tbl[] = { | 
 | 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, | 
 | 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | 
 | 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, | 
 | 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | 
 |  | 
 | 	/* | 
 | 	 * Adapters that were sold with IBM's RS/6000 or pSeries hardware have | 
 | 	 * the incorrect vendor id. | 
 | 	 */ | 
 | 	{ PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, | 
 | 	  PCI_ANY_ID, PCI_ANY_ID, | 
 | 	  PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0}, | 
 |  | 
 | 	{ }	/* terminate list */ | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, pcnet32_pci_tbl); | 
 |  | 
 | static int cards_found; | 
 |  | 
 | /* | 
 |  * VLB I/O addresses | 
 |  */ | 
 | static unsigned int pcnet32_portlist[] __initdata = | 
 |     { 0x300, 0x320, 0x340, 0x360, 0 }; | 
 |  | 
 | static int pcnet32_debug = 0; | 
 | static int tx_start = 1;	/* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */ | 
 | static int pcnet32vlb;		/* check for VLB cards ? */ | 
 |  | 
 | static struct net_device *pcnet32_dev; | 
 |  | 
 | static int max_interrupt_work = 2; | 
 | static int rx_copybreak = 200; | 
 |  | 
 | #define PCNET32_PORT_AUI      0x00 | 
 | #define PCNET32_PORT_10BT     0x01 | 
 | #define PCNET32_PORT_GPSI     0x02 | 
 | #define PCNET32_PORT_MII      0x03 | 
 |  | 
 | #define PCNET32_PORT_PORTSEL  0x03 | 
 | #define PCNET32_PORT_ASEL     0x04 | 
 | #define PCNET32_PORT_100      0x40 | 
 | #define PCNET32_PORT_FD	      0x80 | 
 |  | 
 | #define PCNET32_DMA_MASK 0xffffffff | 
 |  | 
 | #define PCNET32_WATCHDOG_TIMEOUT (jiffies + (2 * HZ)) | 
 | #define PCNET32_BLINK_TIMEOUT	(jiffies + (HZ/4)) | 
 |  | 
 | /* | 
 |  * table to translate option values from tulip | 
 |  * to internal options | 
 |  */ | 
 | static const unsigned char options_mapping[] = { | 
 | 	PCNET32_PORT_ASEL,			/*  0 Auto-select      */ | 
 | 	PCNET32_PORT_AUI,			/*  1 BNC/AUI          */ | 
 | 	PCNET32_PORT_AUI,			/*  2 AUI/BNC          */ | 
 | 	PCNET32_PORT_ASEL,			/*  3 not supported    */ | 
 | 	PCNET32_PORT_10BT | PCNET32_PORT_FD,	/*  4 10baseT-FD       */ | 
 | 	PCNET32_PORT_ASEL,			/*  5 not supported    */ | 
 | 	PCNET32_PORT_ASEL,			/*  6 not supported    */ | 
 | 	PCNET32_PORT_ASEL,			/*  7 not supported    */ | 
 | 	PCNET32_PORT_ASEL,			/*  8 not supported    */ | 
 | 	PCNET32_PORT_MII,			/*  9 MII 10baseT      */ | 
 | 	PCNET32_PORT_MII | PCNET32_PORT_FD,	/* 10 MII 10baseT-FD   */ | 
 | 	PCNET32_PORT_MII,			/* 11 MII (autosel)    */ | 
 | 	PCNET32_PORT_10BT,			/* 12 10BaseT          */ | 
 | 	PCNET32_PORT_MII | PCNET32_PORT_100,	/* 13 MII 100BaseTx    */ | 
 | 						/* 14 MII 100BaseTx-FD */ | 
 | 	PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, | 
 | 	PCNET32_PORT_ASEL			/* 15 not supported    */ | 
 | }; | 
 |  | 
 | static const char pcnet32_gstrings_test[][ETH_GSTRING_LEN] = { | 
 | 	"Loopback test  (offline)" | 
 | }; | 
 |  | 
 | #define PCNET32_TEST_LEN (sizeof(pcnet32_gstrings_test) / ETH_GSTRING_LEN) | 
 |  | 
 | #define PCNET32_NUM_REGS 136 | 
 |  | 
 | #define MAX_UNITS 8		/* More are supported, limit only on options */ | 
 | static int options[MAX_UNITS]; | 
 | static int full_duplex[MAX_UNITS]; | 
 | static int homepna[MAX_UNITS]; | 
 |  | 
 | /* | 
 |  *				Theory of Operation | 
 |  * | 
 |  * This driver uses the same software structure as the normal lance | 
 |  * driver. So look for a verbose description in lance.c. The differences | 
 |  * to the normal lance driver is the use of the 32bit mode of PCnet32 | 
 |  * and PCnetPCI chips. Because these chips are 32bit chips, there is no | 
 |  * 16MB limitation and we don't need bounce buffers. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Set the number of Tx and Rx buffers, using Log_2(# buffers). | 
 |  * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. | 
 |  * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). | 
 |  */ | 
 | #ifndef PCNET32_LOG_TX_BUFFERS | 
 | #define PCNET32_LOG_TX_BUFFERS		4 | 
 | #define PCNET32_LOG_RX_BUFFERS		5 | 
 | #define PCNET32_LOG_MAX_TX_BUFFERS	9	/* 2^9 == 512 */ | 
 | #define PCNET32_LOG_MAX_RX_BUFFERS	9 | 
 | #endif | 
 |  | 
 | #define TX_RING_SIZE		(1 << (PCNET32_LOG_TX_BUFFERS)) | 
 | #define TX_MAX_RING_SIZE	(1 << (PCNET32_LOG_MAX_TX_BUFFERS)) | 
 |  | 
 | #define RX_RING_SIZE		(1 << (PCNET32_LOG_RX_BUFFERS)) | 
 | #define RX_MAX_RING_SIZE	(1 << (PCNET32_LOG_MAX_RX_BUFFERS)) | 
 |  | 
 | #define PKT_BUF_SZ		1544 | 
 |  | 
 | /* Offsets from base I/O address. */ | 
 | #define PCNET32_WIO_RDP		0x10 | 
 | #define PCNET32_WIO_RAP		0x12 | 
 | #define PCNET32_WIO_RESET	0x14 | 
 | #define PCNET32_WIO_BDP		0x16 | 
 |  | 
 | #define PCNET32_DWIO_RDP	0x10 | 
 | #define PCNET32_DWIO_RAP	0x14 | 
 | #define PCNET32_DWIO_RESET	0x18 | 
 | #define PCNET32_DWIO_BDP	0x1C | 
 |  | 
 | #define PCNET32_TOTAL_SIZE	0x20 | 
 |  | 
 | /* The PCNET32 Rx and Tx ring descriptors. */ | 
 | struct pcnet32_rx_head { | 
 | 	u32	base; | 
 | 	s16	buf_length; | 
 | 	s16	status; | 
 | 	u32	msg_length; | 
 | 	u32	reserved; | 
 | }; | 
 |  | 
 | struct pcnet32_tx_head { | 
 | 	u32	base; | 
 | 	s16	length; | 
 | 	s16	status; | 
 | 	u32	misc; | 
 | 	u32	reserved; | 
 | }; | 
 |  | 
 | /* The PCNET32 32-Bit initialization block, described in databook. */ | 
 | struct pcnet32_init_block { | 
 | 	u16	mode; | 
 | 	u16	tlen_rlen; | 
 | 	u8	phys_addr[6]; | 
 | 	u16	reserved; | 
 | 	u32	filter[2]; | 
 | 	/* Receive and transmit ring base, along with extra bits. */ | 
 | 	u32	rx_ring; | 
 | 	u32	tx_ring; | 
 | }; | 
 |  | 
 | /* PCnet32 access functions */ | 
 | struct pcnet32_access { | 
 | 	u16	(*read_csr) (unsigned long, int); | 
 | 	void	(*write_csr) (unsigned long, int, u16); | 
 | 	u16	(*read_bcr) (unsigned long, int); | 
 | 	void	(*write_bcr) (unsigned long, int, u16); | 
 | 	u16	(*read_rap) (unsigned long); | 
 | 	void	(*write_rap) (unsigned long, u16); | 
 | 	void	(*reset) (unsigned long); | 
 | }; | 
 |  | 
 | /* | 
 |  * The first field of pcnet32_private is read by the ethernet device | 
 |  * so the structure should be allocated using pci_alloc_consistent(). | 
 |  */ | 
 | struct pcnet32_private { | 
 | 	struct pcnet32_init_block init_block; | 
 | 	/* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ | 
 | 	struct pcnet32_rx_head	*rx_ring; | 
 | 	struct pcnet32_tx_head	*tx_ring; | 
 | 	dma_addr_t		dma_addr;/* DMA address of beginning of this | 
 | 				   object, returned by pci_alloc_consistent */ | 
 | 	struct pci_dev		*pci_dev; | 
 | 	const char		*name; | 
 | 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */ | 
 | 	struct sk_buff		**tx_skbuff; | 
 | 	struct sk_buff		**rx_skbuff; | 
 | 	dma_addr_t		*tx_dma_addr; | 
 | 	dma_addr_t		*rx_dma_addr; | 
 | 	struct pcnet32_access	a; | 
 | 	spinlock_t		lock;		/* Guard lock */ | 
 | 	unsigned int		cur_rx, cur_tx;	/* The next free ring entry */ | 
 | 	unsigned int		rx_ring_size;	/* current rx ring size */ | 
 | 	unsigned int		tx_ring_size;	/* current tx ring size */ | 
 | 	unsigned int		rx_mod_mask;	/* rx ring modular mask */ | 
 | 	unsigned int		tx_mod_mask;	/* tx ring modular mask */ | 
 | 	unsigned short		rx_len_bits; | 
 | 	unsigned short		tx_len_bits; | 
 | 	dma_addr_t		rx_ring_dma_addr; | 
 | 	dma_addr_t		tx_ring_dma_addr; | 
 | 	unsigned int		dirty_rx,	/* ring entries to be freed. */ | 
 | 				dirty_tx; | 
 |  | 
 | 	struct net_device_stats	stats; | 
 | 	char			tx_full; | 
 | 	char			phycount;	/* number of phys found */ | 
 | 	int			options; | 
 | 	unsigned int		shared_irq:1,	/* shared irq possible */ | 
 | 				dxsuflo:1,   /* disable transmit stop on uflo */ | 
 | 				mii:1;		/* mii port available */ | 
 | 	struct net_device	*next; | 
 | 	struct mii_if_info	mii_if; | 
 | 	struct timer_list	watchdog_timer; | 
 | 	struct timer_list	blink_timer; | 
 | 	u32			msg_enable;	/* debug message level */ | 
 |  | 
 | 	/* each bit indicates an available PHY */ | 
 | 	u32			phymask; | 
 | }; | 
 |  | 
 | static void pcnet32_probe_vlbus(void); | 
 | static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); | 
 | static int pcnet32_probe1(unsigned long, int, struct pci_dev *); | 
 | static int pcnet32_open(struct net_device *); | 
 | static int pcnet32_init_ring(struct net_device *); | 
 | static int pcnet32_start_xmit(struct sk_buff *, struct net_device *); | 
 | static int pcnet32_rx(struct net_device *); | 
 | static void pcnet32_tx_timeout(struct net_device *dev); | 
 | static irqreturn_t pcnet32_interrupt(int, void *, struct pt_regs *); | 
 | static int pcnet32_close(struct net_device *); | 
 | static struct net_device_stats *pcnet32_get_stats(struct net_device *); | 
 | static void pcnet32_load_multicast(struct net_device *dev); | 
 | static void pcnet32_set_multicast_list(struct net_device *); | 
 | static int pcnet32_ioctl(struct net_device *, struct ifreq *, int); | 
 | static void pcnet32_watchdog(struct net_device *); | 
 | static int mdio_read(struct net_device *dev, int phy_id, int reg_num); | 
 | static void mdio_write(struct net_device *dev, int phy_id, int reg_num, | 
 | 		       int val); | 
 | static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits); | 
 | static void pcnet32_ethtool_test(struct net_device *dev, | 
 | 				 struct ethtool_test *eth_test, u64 * data); | 
 | static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1); | 
 | static int pcnet32_phys_id(struct net_device *dev, u32 data); | 
 | static void pcnet32_led_blink_callback(struct net_device *dev); | 
 | static int pcnet32_get_regs_len(struct net_device *dev); | 
 | static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, | 
 | 			     void *ptr); | 
 | static void pcnet32_purge_tx_ring(struct net_device *dev); | 
 | static int pcnet32_alloc_ring(struct net_device *dev, char *name); | 
 | static void pcnet32_free_ring(struct net_device *dev); | 
 | static void pcnet32_check_media(struct net_device *dev, int verbose); | 
 |  | 
 | enum pci_flags_bit { | 
 | 	PCI_USES_IO = 1, PCI_USES_MEM = 2, PCI_USES_MASTER = 4, | 
 | 	PCI_ADDR0 = 0x10 << 0, PCI_ADDR1 = 0x10 << 1, PCI_ADDR2 = | 
 | 	    0x10 << 2, PCI_ADDR3 = 0x10 << 3, | 
 | }; | 
 |  | 
 | static u16 pcnet32_wio_read_csr(unsigned long addr, int index) | 
 | { | 
 | 	outw(index, addr + PCNET32_WIO_RAP); | 
 | 	return inw(addr + PCNET32_WIO_RDP); | 
 | } | 
 |  | 
 | static void pcnet32_wio_write_csr(unsigned long addr, int index, u16 val) | 
 | { | 
 | 	outw(index, addr + PCNET32_WIO_RAP); | 
 | 	outw(val, addr + PCNET32_WIO_RDP); | 
 | } | 
 |  | 
 | static u16 pcnet32_wio_read_bcr(unsigned long addr, int index) | 
 | { | 
 | 	outw(index, addr + PCNET32_WIO_RAP); | 
 | 	return inw(addr + PCNET32_WIO_BDP); | 
 | } | 
 |  | 
 | static void pcnet32_wio_write_bcr(unsigned long addr, int index, u16 val) | 
 | { | 
 | 	outw(index, addr + PCNET32_WIO_RAP); | 
 | 	outw(val, addr + PCNET32_WIO_BDP); | 
 | } | 
 |  | 
 | static u16 pcnet32_wio_read_rap(unsigned long addr) | 
 | { | 
 | 	return inw(addr + PCNET32_WIO_RAP); | 
 | } | 
 |  | 
 | static void pcnet32_wio_write_rap(unsigned long addr, u16 val) | 
 | { | 
 | 	outw(val, addr + PCNET32_WIO_RAP); | 
 | } | 
 |  | 
 | static void pcnet32_wio_reset(unsigned long addr) | 
 | { | 
 | 	inw(addr + PCNET32_WIO_RESET); | 
 | } | 
 |  | 
 | static int pcnet32_wio_check(unsigned long addr) | 
 | { | 
 | 	outw(88, addr + PCNET32_WIO_RAP); | 
 | 	return (inw(addr + PCNET32_WIO_RAP) == 88); | 
 | } | 
 |  | 
 | static struct pcnet32_access pcnet32_wio = { | 
 | 	.read_csr = pcnet32_wio_read_csr, | 
 | 	.write_csr = pcnet32_wio_write_csr, | 
 | 	.read_bcr = pcnet32_wio_read_bcr, | 
 | 	.write_bcr = pcnet32_wio_write_bcr, | 
 | 	.read_rap = pcnet32_wio_read_rap, | 
 | 	.write_rap = pcnet32_wio_write_rap, | 
 | 	.reset = pcnet32_wio_reset | 
 | }; | 
 |  | 
 | static u16 pcnet32_dwio_read_csr(unsigned long addr, int index) | 
 | { | 
 | 	outl(index, addr + PCNET32_DWIO_RAP); | 
 | 	return (inl(addr + PCNET32_DWIO_RDP) & 0xffff); | 
 | } | 
 |  | 
 | static void pcnet32_dwio_write_csr(unsigned long addr, int index, u16 val) | 
 | { | 
 | 	outl(index, addr + PCNET32_DWIO_RAP); | 
 | 	outl(val, addr + PCNET32_DWIO_RDP); | 
 | } | 
 |  | 
 | static u16 pcnet32_dwio_read_bcr(unsigned long addr, int index) | 
 | { | 
 | 	outl(index, addr + PCNET32_DWIO_RAP); | 
 | 	return (inl(addr + PCNET32_DWIO_BDP) & 0xffff); | 
 | } | 
 |  | 
 | static void pcnet32_dwio_write_bcr(unsigned long addr, int index, u16 val) | 
 | { | 
 | 	outl(index, addr + PCNET32_DWIO_RAP); | 
 | 	outl(val, addr + PCNET32_DWIO_BDP); | 
 | } | 
 |  | 
 | static u16 pcnet32_dwio_read_rap(unsigned long addr) | 
 | { | 
 | 	return (inl(addr + PCNET32_DWIO_RAP) & 0xffff); | 
 | } | 
 |  | 
 | static void pcnet32_dwio_write_rap(unsigned long addr, u16 val) | 
 | { | 
 | 	outl(val, addr + PCNET32_DWIO_RAP); | 
 | } | 
 |  | 
 | static void pcnet32_dwio_reset(unsigned long addr) | 
 | { | 
 | 	inl(addr + PCNET32_DWIO_RESET); | 
 | } | 
 |  | 
 | static int pcnet32_dwio_check(unsigned long addr) | 
 | { | 
 | 	outl(88, addr + PCNET32_DWIO_RAP); | 
 | 	return ((inl(addr + PCNET32_DWIO_RAP) & 0xffff) == 88); | 
 | } | 
 |  | 
 | static struct pcnet32_access pcnet32_dwio = { | 
 | 	.read_csr = pcnet32_dwio_read_csr, | 
 | 	.write_csr = pcnet32_dwio_write_csr, | 
 | 	.read_bcr = pcnet32_dwio_read_bcr, | 
 | 	.write_bcr = pcnet32_dwio_write_bcr, | 
 | 	.read_rap = pcnet32_dwio_read_rap, | 
 | 	.write_rap = pcnet32_dwio_write_rap, | 
 | 	.reset = pcnet32_dwio_reset | 
 | }; | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | static void pcnet32_poll_controller(struct net_device *dev) | 
 | { | 
 | 	disable_irq(dev->irq); | 
 | 	pcnet32_interrupt(0, dev, NULL); | 
 | 	enable_irq(dev->irq); | 
 | } | 
 | #endif | 
 |  | 
 | static int pcnet32_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 | 	int r = -EOPNOTSUPP; | 
 |  | 
 | 	if (lp->mii) { | 
 | 		spin_lock_irqsave(&lp->lock, flags); | 
 | 		mii_ethtool_gset(&lp->mii_if, cmd); | 
 | 		spin_unlock_irqrestore(&lp->lock, flags); | 
 | 		r = 0; | 
 | 	} | 
 | 	return r; | 
 | } | 
 |  | 
 | static int pcnet32_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 | 	int r = -EOPNOTSUPP; | 
 |  | 
 | 	if (lp->mii) { | 
 | 		spin_lock_irqsave(&lp->lock, flags); | 
 | 		r = mii_ethtool_sset(&lp->mii_if, cmd); | 
 | 		spin_unlock_irqrestore(&lp->lock, flags); | 
 | 	} | 
 | 	return r; | 
 | } | 
 |  | 
 | static void pcnet32_get_drvinfo(struct net_device *dev, | 
 | 				struct ethtool_drvinfo *info) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 	strcpy(info->driver, DRV_NAME); | 
 | 	strcpy(info->version, DRV_VERSION); | 
 | 	if (lp->pci_dev) | 
 | 		strcpy(info->bus_info, pci_name(lp->pci_dev)); | 
 | 	else | 
 | 		sprintf(info->bus_info, "VLB 0x%lx", dev->base_addr); | 
 | } | 
 |  | 
 | static u32 pcnet32_get_link(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 | 	int r; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	if (lp->mii) { | 
 | 		r = mii_link_ok(&lp->mii_if); | 
 | 	} else { | 
 | 		ulong ioaddr = dev->base_addr;	/* card base I/O address */ | 
 | 		r = (lp->a.read_bcr(ioaddr, 4) != 0xc0); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static u32 pcnet32_get_msglevel(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	return lp->msg_enable; | 
 | } | 
 |  | 
 | static void pcnet32_set_msglevel(struct net_device *dev, u32 value) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	lp->msg_enable = value; | 
 | } | 
 |  | 
 | static int pcnet32_nway_reset(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 | 	int r = -EOPNOTSUPP; | 
 |  | 
 | 	if (lp->mii) { | 
 | 		spin_lock_irqsave(&lp->lock, flags); | 
 | 		r = mii_nway_restart(&lp->mii_if); | 
 | 		spin_unlock_irqrestore(&lp->lock, flags); | 
 | 	} | 
 | 	return r; | 
 | } | 
 |  | 
 | static void pcnet32_get_ringparam(struct net_device *dev, | 
 | 				  struct ethtool_ringparam *ering) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 	ering->tx_max_pending = TX_MAX_RING_SIZE - 1; | 
 | 	ering->tx_pending = lp->tx_ring_size - 1; | 
 | 	ering->rx_max_pending = RX_MAX_RING_SIZE - 1; | 
 | 	ering->rx_pending = lp->rx_ring_size - 1; | 
 | } | 
 |  | 
 | static int pcnet32_set_ringparam(struct net_device *dev, | 
 | 				 struct ethtool_ringparam *ering) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	if (ering->rx_mini_pending || ering->rx_jumbo_pending) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (netif_running(dev)) | 
 | 		pcnet32_close(dev); | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	pcnet32_free_ring(dev); | 
 | 	lp->tx_ring_size = | 
 | 	    min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); | 
 | 	lp->rx_ring_size = | 
 | 	    min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); | 
 |  | 
 | 	/* set the minimum ring size to 4, to allow the loopback test to work | 
 | 	 * unchanged. | 
 | 	 */ | 
 | 	for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { | 
 | 		if (lp->tx_ring_size <= (1 << i)) | 
 | 			break; | 
 | 	} | 
 | 	lp->tx_ring_size = (1 << i); | 
 | 	lp->tx_mod_mask = lp->tx_ring_size - 1; | 
 | 	lp->tx_len_bits = (i << 12); | 
 |  | 
 | 	for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { | 
 | 		if (lp->rx_ring_size <= (1 << i)) | 
 | 			break; | 
 | 	} | 
 | 	lp->rx_ring_size = (1 << i); | 
 | 	lp->rx_mod_mask = lp->rx_ring_size - 1; | 
 | 	lp->rx_len_bits = (i << 4); | 
 |  | 
 | 	if (pcnet32_alloc_ring(dev, dev->name)) { | 
 | 		pcnet32_free_ring(dev); | 
 | 		spin_unlock_irqrestore(&lp->lock, flags); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 		printk(KERN_INFO PFX | 
 | 		       "%s: Ring Param Settings: RX: %d, TX: %d\n", dev->name, | 
 | 		       lp->rx_ring_size, lp->tx_ring_size); | 
 |  | 
 | 	if (netif_running(dev)) | 
 | 		pcnet32_open(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pcnet32_get_strings(struct net_device *dev, u32 stringset, | 
 | 				u8 * data) | 
 | { | 
 | 	memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test)); | 
 | } | 
 |  | 
 | static int pcnet32_self_test_count(struct net_device *dev) | 
 | { | 
 | 	return PCNET32_TEST_LEN; | 
 | } | 
 |  | 
 | static void pcnet32_ethtool_test(struct net_device *dev, | 
 | 				 struct ethtool_test *test, u64 * data) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int rc; | 
 |  | 
 | 	if (test->flags == ETH_TEST_FL_OFFLINE) { | 
 | 		rc = pcnet32_loopback_test(dev, data); | 
 | 		if (rc) { | 
 | 			if (netif_msg_hw(lp)) | 
 | 				printk(KERN_DEBUG "%s: Loopback test failed.\n", | 
 | 				       dev->name); | 
 | 			test->flags |= ETH_TEST_FL_FAILED; | 
 | 		} else if (netif_msg_hw(lp)) | 
 | 			printk(KERN_DEBUG "%s: Loopback test passed.\n", | 
 | 			       dev->name); | 
 | 	} else if (netif_msg_hw(lp)) | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: No tests to run (specify 'Offline' on ethtool).", | 
 | 		       dev->name); | 
 | }				/* end pcnet32_ethtool_test */ | 
 |  | 
 | static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	struct pcnet32_access *a = &lp->a;	/* access to registers */ | 
 | 	ulong ioaddr = dev->base_addr;	/* card base I/O address */ | 
 | 	struct sk_buff *skb;	/* sk buff */ | 
 | 	int x, i;		/* counters */ | 
 | 	int numbuffs = 4;	/* number of TX/RX buffers and descs */ | 
 | 	u16 status = 0x8300;	/* TX ring status */ | 
 | 	u16 teststatus;		/* test of ring status */ | 
 | 	int rc;			/* return code */ | 
 | 	int size;		/* size of packets */ | 
 | 	unsigned char *packet;	/* source packet data */ | 
 | 	static const int data_len = 60;	/* length of source packets */ | 
 | 	unsigned long flags; | 
 | 	unsigned long ticks; | 
 |  | 
 | 	*data1 = 1;		/* status of test, default to fail */ | 
 | 	rc = 1;			/* default to fail */ | 
 |  | 
 | 	if (netif_running(dev)) | 
 | 		pcnet32_close(dev); | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 |  | 
 | 	/* Reset the PCNET32 */ | 
 | 	lp->a.reset(ioaddr); | 
 |  | 
 | 	/* switch pcnet32 to 32bit mode */ | 
 | 	lp->a.write_bcr(ioaddr, 20, 2); | 
 |  | 
 | 	lp->init_block.mode = | 
 | 	    le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); | 
 | 	lp->init_block.filter[0] = 0; | 
 | 	lp->init_block.filter[1] = 0; | 
 |  | 
 | 	/* purge & init rings but don't actually restart */ | 
 | 	pcnet32_restart(dev, 0x0000); | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0004);	/* Set STOP bit */ | 
 |  | 
 | 	/* Initialize Transmit buffers. */ | 
 | 	size = data_len + 15; | 
 | 	for (x = 0; x < numbuffs; x++) { | 
 | 		if (!(skb = dev_alloc_skb(size))) { | 
 | 			if (netif_msg_hw(lp)) | 
 | 				printk(KERN_DEBUG | 
 | 				       "%s: Cannot allocate skb at line: %d!\n", | 
 | 				       dev->name, __LINE__); | 
 | 			goto clean_up; | 
 | 		} else { | 
 | 			packet = skb->data; | 
 | 			skb_put(skb, size);	/* create space for data */ | 
 | 			lp->tx_skbuff[x] = skb; | 
 | 			lp->tx_ring[x].length = le16_to_cpu(-skb->len); | 
 | 			lp->tx_ring[x].misc = 0; | 
 |  | 
 | 			/* put DA and SA into the skb */ | 
 | 			for (i = 0; i < 6; i++) | 
 | 				*packet++ = dev->dev_addr[i]; | 
 | 			for (i = 0; i < 6; i++) | 
 | 				*packet++ = dev->dev_addr[i]; | 
 | 			/* type */ | 
 | 			*packet++ = 0x08; | 
 | 			*packet++ = 0x06; | 
 | 			/* packet number */ | 
 | 			*packet++ = x; | 
 | 			/* fill packet with data */ | 
 | 			for (i = 0; i < data_len; i++) | 
 | 				*packet++ = i; | 
 |  | 
 | 			lp->tx_dma_addr[x] = | 
 | 			    pci_map_single(lp->pci_dev, skb->data, skb->len, | 
 | 					   PCI_DMA_TODEVICE); | 
 | 			lp->tx_ring[x].base = | 
 | 			    (u32) le32_to_cpu(lp->tx_dma_addr[x]); | 
 | 			wmb();	/* Make sure owner changes after all others are visible */ | 
 | 			lp->tx_ring[x].status = le16_to_cpu(status); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	x = a->read_bcr(ioaddr, 32);	/* set internal loopback in BSR32 */ | 
 | 	x = x | 0x0002; | 
 | 	a->write_bcr(ioaddr, 32, x); | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 15, 0x0044);	/* set int loopback in CSR15 */ | 
 |  | 
 | 	teststatus = le16_to_cpu(0x8000); | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0002);	/* Set STRT bit */ | 
 |  | 
 | 	/* Check status of descriptors */ | 
 | 	for (x = 0; x < numbuffs; x++) { | 
 | 		ticks = 0; | 
 | 		rmb(); | 
 | 		while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) { | 
 | 			spin_unlock_irqrestore(&lp->lock, flags); | 
 | 			mdelay(1); | 
 | 			spin_lock_irqsave(&lp->lock, flags); | 
 | 			rmb(); | 
 | 			ticks++; | 
 | 		} | 
 | 		if (ticks == 200) { | 
 | 			if (netif_msg_hw(lp)) | 
 | 				printk("%s: Desc %d failed to reset!\n", | 
 | 				       dev->name, x); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0004);	/* Set STOP bit */ | 
 | 	wmb(); | 
 | 	if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) { | 
 | 		printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name); | 
 |  | 
 | 		for (x = 0; x < numbuffs; x++) { | 
 | 			printk(KERN_DEBUG "%s: Packet %d:\n", dev->name, x); | 
 | 			skb = lp->rx_skbuff[x]; | 
 | 			for (i = 0; i < size; i++) { | 
 | 				printk("%02x ", *(skb->data + i)); | 
 | 			} | 
 | 			printk("\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	x = 0; | 
 | 	rc = 0; | 
 | 	while (x < numbuffs && !rc) { | 
 | 		skb = lp->rx_skbuff[x]; | 
 | 		packet = lp->tx_skbuff[x]->data; | 
 | 		for (i = 0; i < size; i++) { | 
 | 			if (*(skb->data + i) != packet[i]) { | 
 | 				if (netif_msg_hw(lp)) | 
 | 					printk(KERN_DEBUG | 
 | 					       "%s: Error in compare! %2x - %02x %02x\n", | 
 | 					       dev->name, i, *(skb->data + i), | 
 | 					       packet[i]); | 
 | 				rc = 1; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		x++; | 
 | 	} | 
 | 	if (!rc) { | 
 | 		*data1 = 0; | 
 | 	} | 
 |  | 
 |       clean_up: | 
 | 	pcnet32_purge_tx_ring(dev); | 
 | 	x = a->read_csr(ioaddr, 15) & 0xFFFF; | 
 | 	a->write_csr(ioaddr, 15, (x & ~0x0044));	/* reset bits 6 and 2 */ | 
 |  | 
 | 	x = a->read_bcr(ioaddr, 32);	/* reset internal loopback */ | 
 | 	x = x & ~0x0002; | 
 | 	a->write_bcr(ioaddr, 32, x); | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	if (netif_running(dev)) { | 
 | 		pcnet32_open(dev); | 
 | 	} else { | 
 | 		lp->a.write_bcr(ioaddr, 20, 4);	/* return to 16bit mode */ | 
 | 	} | 
 |  | 
 | 	return (rc); | 
 | }				/* end pcnet32_loopback_test  */ | 
 |  | 
 | static void pcnet32_led_blink_callback(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	struct pcnet32_access *a = &lp->a; | 
 | 	ulong ioaddr = dev->base_addr; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	for (i = 4; i < 8; i++) { | 
 | 		a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT); | 
 | } | 
 |  | 
 | static int pcnet32_phys_id(struct net_device *dev, u32 data) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	struct pcnet32_access *a = &lp->a; | 
 | 	ulong ioaddr = dev->base_addr; | 
 | 	unsigned long flags; | 
 | 	int i, regs[4]; | 
 |  | 
 | 	if (!lp->blink_timer.function) { | 
 | 		init_timer(&lp->blink_timer); | 
 | 		lp->blink_timer.function = (void *)pcnet32_led_blink_callback; | 
 | 		lp->blink_timer.data = (unsigned long)dev; | 
 | 	} | 
 |  | 
 | 	/* Save the current value of the bcrs */ | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	for (i = 4; i < 8; i++) { | 
 | 		regs[i - 4] = a->read_bcr(ioaddr, i); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	mod_timer(&lp->blink_timer, jiffies); | 
 | 	set_current_state(TASK_INTERRUPTIBLE); | 
 |  | 
 | 	if ((!data) || (data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))) | 
 | 		data = (u32) (MAX_SCHEDULE_TIMEOUT / HZ); | 
 |  | 
 | 	msleep_interruptible(data * 1000); | 
 | 	del_timer_sync(&lp->blink_timer); | 
 |  | 
 | 	/* Restore the original value of the bcrs */ | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	for (i = 4; i < 8; i++) { | 
 | 		a->write_bcr(ioaddr, i, regs[i - 4]); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define PCNET32_REGS_PER_PHY	32 | 
 | #define PCNET32_MAX_PHYS	32 | 
 | static int pcnet32_get_regs_len(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int j = lp->phycount * PCNET32_REGS_PER_PHY; | 
 |  | 
 | 	return ((PCNET32_NUM_REGS + j) * sizeof(u16)); | 
 | } | 
 |  | 
 | static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, | 
 | 			     void *ptr) | 
 | { | 
 | 	int i, csr0; | 
 | 	u16 *buff = ptr; | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	struct pcnet32_access *a = &lp->a; | 
 | 	ulong ioaddr = dev->base_addr; | 
 | 	int ticks; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 |  | 
 | 	csr0 = a->read_csr(ioaddr, 0); | 
 | 	if (!(csr0 & 0x0004)) {	/* If not stopped */ | 
 | 		/* set SUSPEND (SPND) - CSR5 bit 0 */ | 
 | 		a->write_csr(ioaddr, 5, 0x0001); | 
 |  | 
 | 		/* poll waiting for bit to be set */ | 
 | 		ticks = 0; | 
 | 		while (!(a->read_csr(ioaddr, 5) & 0x0001)) { | 
 | 			spin_unlock_irqrestore(&lp->lock, flags); | 
 | 			mdelay(1); | 
 | 			spin_lock_irqsave(&lp->lock, flags); | 
 | 			ticks++; | 
 | 			if (ticks > 200) { | 
 | 				if (netif_msg_hw(lp)) | 
 | 					printk(KERN_DEBUG | 
 | 					       "%s: Error getting into suspend!\n", | 
 | 					       dev->name); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* read address PROM */ | 
 | 	for (i = 0; i < 16; i += 2) | 
 | 		*buff++ = inw(ioaddr + i); | 
 |  | 
 | 	/* read control and status registers */ | 
 | 	for (i = 0; i < 90; i++) { | 
 | 		*buff++ = a->read_csr(ioaddr, i); | 
 | 	} | 
 |  | 
 | 	*buff++ = a->read_csr(ioaddr, 112); | 
 | 	*buff++ = a->read_csr(ioaddr, 114); | 
 |  | 
 | 	/* read bus configuration registers */ | 
 | 	for (i = 0; i < 30; i++) { | 
 | 		*buff++ = a->read_bcr(ioaddr, i); | 
 | 	} | 
 | 	*buff++ = 0;		/* skip bcr30 so as not to hang 79C976 */ | 
 | 	for (i = 31; i < 36; i++) { | 
 | 		*buff++ = a->read_bcr(ioaddr, i); | 
 | 	} | 
 |  | 
 | 	/* read mii phy registers */ | 
 | 	if (lp->mii) { | 
 | 		int j; | 
 | 		for (j = 0; j < PCNET32_MAX_PHYS; j++) { | 
 | 			if (lp->phymask & (1 << j)) { | 
 | 				for (i = 0; i < PCNET32_REGS_PER_PHY; i++) { | 
 | 					lp->a.write_bcr(ioaddr, 33, | 
 | 							(j << 5) | i); | 
 | 					*buff++ = lp->a.read_bcr(ioaddr, 34); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!(csr0 & 0x0004)) {	/* If not stopped */ | 
 | 		/* clear SUSPEND (SPND) - CSR5 bit 0 */ | 
 | 		a->write_csr(ioaddr, 5, 0x0000); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 | } | 
 |  | 
 | static struct ethtool_ops pcnet32_ethtool_ops = { | 
 | 	.get_settings		= pcnet32_get_settings, | 
 | 	.set_settings		= pcnet32_set_settings, | 
 | 	.get_drvinfo		= pcnet32_get_drvinfo, | 
 | 	.get_msglevel		= pcnet32_get_msglevel, | 
 | 	.set_msglevel		= pcnet32_set_msglevel, | 
 | 	.nway_reset		= pcnet32_nway_reset, | 
 | 	.get_link		= pcnet32_get_link, | 
 | 	.get_ringparam		= pcnet32_get_ringparam, | 
 | 	.set_ringparam		= pcnet32_set_ringparam, | 
 | 	.get_tx_csum		= ethtool_op_get_tx_csum, | 
 | 	.get_sg			= ethtool_op_get_sg, | 
 | 	.get_tso		= ethtool_op_get_tso, | 
 | 	.get_strings		= pcnet32_get_strings, | 
 | 	.self_test_count	= pcnet32_self_test_count, | 
 | 	.self_test		= pcnet32_ethtool_test, | 
 | 	.phys_id		= pcnet32_phys_id, | 
 | 	.get_regs_len		= pcnet32_get_regs_len, | 
 | 	.get_regs		= pcnet32_get_regs, | 
 | 	.get_perm_addr		= ethtool_op_get_perm_addr, | 
 | }; | 
 |  | 
 | /* only probes for non-PCI devices, the rest are handled by | 
 |  * pci_register_driver via pcnet32_probe_pci */ | 
 |  | 
 | static void __devinit pcnet32_probe_vlbus(void) | 
 | { | 
 | 	unsigned int *port, ioaddr; | 
 |  | 
 | 	/* search for PCnet32 VLB cards at known addresses */ | 
 | 	for (port = pcnet32_portlist; (ioaddr = *port); port++) { | 
 | 		if (request_region | 
 | 		    (ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) { | 
 | 			/* check if there is really a pcnet chip on that ioaddr */ | 
 | 			if ((inb(ioaddr + 14) == 0x57) | 
 | 			    && (inb(ioaddr + 15) == 0x57)) { | 
 | 				pcnet32_probe1(ioaddr, 0, NULL); | 
 | 			} else { | 
 | 				release_region(ioaddr, PCNET32_TOTAL_SIZE); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int __devinit | 
 | pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent) | 
 | { | 
 | 	unsigned long ioaddr; | 
 | 	int err; | 
 |  | 
 | 	err = pci_enable_device(pdev); | 
 | 	if (err < 0) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX | 
 | 			       "failed to enable device -- err=%d\n", err); | 
 | 		return err; | 
 | 	} | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	ioaddr = pci_resource_start(pdev, 0); | 
 | 	if (!ioaddr) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX | 
 | 			       "card has no PCI IO resources, aborting\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (!pci_dma_supported(pdev, PCNET32_DMA_MASK)) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX | 
 | 			       "architecture does not support 32bit PCI busmaster DMA\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") == | 
 | 	    NULL) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX | 
 | 			       "io address range already allocated\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	err = pcnet32_probe1(ioaddr, 1, pdev); | 
 | 	if (err < 0) { | 
 | 		pci_disable_device(pdev); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | /* pcnet32_probe1 | 
 |  *  Called from both pcnet32_probe_vlbus and pcnet_probe_pci. | 
 |  *  pdev will be NULL when called from pcnet32_probe_vlbus. | 
 |  */ | 
 | static int __devinit | 
 | pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) | 
 | { | 
 | 	struct pcnet32_private *lp; | 
 | 	dma_addr_t lp_dma_addr; | 
 | 	int i, media; | 
 | 	int fdx, mii, fset, dxsuflo; | 
 | 	int chip_version; | 
 | 	char *chipname; | 
 | 	struct net_device *dev; | 
 | 	struct pcnet32_access *a = NULL; | 
 | 	u8 promaddr[6]; | 
 | 	int ret = -ENODEV; | 
 |  | 
 | 	/* reset the chip */ | 
 | 	pcnet32_wio_reset(ioaddr); | 
 |  | 
 | 	/* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */ | 
 | 	if (pcnet32_wio_read_csr(ioaddr, 0) == 4 && pcnet32_wio_check(ioaddr)) { | 
 | 		a = &pcnet32_wio; | 
 | 	} else { | 
 | 		pcnet32_dwio_reset(ioaddr); | 
 | 		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 | 
 | 		    && pcnet32_dwio_check(ioaddr)) { | 
 | 			a = &pcnet32_dwio; | 
 | 		} else | 
 | 			goto err_release_region; | 
 | 	} | 
 |  | 
 | 	chip_version = | 
 | 	    a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr, 89) << 16); | 
 | 	if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW)) | 
 | 		printk(KERN_INFO "  PCnet chip version is %#x.\n", | 
 | 		       chip_version); | 
 | 	if ((chip_version & 0xfff) != 0x003) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_INFO PFX "Unsupported chip version.\n"); | 
 | 		goto err_release_region; | 
 | 	} | 
 |  | 
 | 	/* initialize variables */ | 
 | 	fdx = mii = fset = dxsuflo = 0; | 
 | 	chip_version = (chip_version >> 12) & 0xffff; | 
 |  | 
 | 	switch (chip_version) { | 
 | 	case 0x2420: | 
 | 		chipname = "PCnet/PCI 79C970";	/* PCI */ | 
 | 		break; | 
 | 	case 0x2430: | 
 | 		if (shared) | 
 | 			chipname = "PCnet/PCI 79C970";	/* 970 gives the wrong chip id back */ | 
 | 		else | 
 | 			chipname = "PCnet/32 79C965";	/* 486/VL bus */ | 
 | 		break; | 
 | 	case 0x2621: | 
 | 		chipname = "PCnet/PCI II 79C970A";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		break; | 
 | 	case 0x2623: | 
 | 		chipname = "PCnet/FAST 79C971";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		mii = 1; | 
 | 		fset = 1; | 
 | 		break; | 
 | 	case 0x2624: | 
 | 		chipname = "PCnet/FAST+ 79C972";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		mii = 1; | 
 | 		fset = 1; | 
 | 		break; | 
 | 	case 0x2625: | 
 | 		chipname = "PCnet/FAST III 79C973";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		mii = 1; | 
 | 		break; | 
 | 	case 0x2626: | 
 | 		chipname = "PCnet/Home 79C978";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		/* | 
 | 		 * This is based on specs published at www.amd.com.  This section | 
 | 		 * assumes that a card with a 79C978 wants to go into standard | 
 | 		 * ethernet mode.  The 79C978 can also go into 1Mb HomePNA mode, | 
 | 		 * and the module option homepna=1 can select this instead. | 
 | 		 */ | 
 | 		media = a->read_bcr(ioaddr, 49); | 
 | 		media &= ~3;	/* default to 10Mb ethernet */ | 
 | 		if (cards_found < MAX_UNITS && homepna[cards_found]) | 
 | 			media |= 1;	/* switch to home wiring mode */ | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_DEBUG PFX "media set to %sMbit mode.\n", | 
 | 			       (media & 1) ? "1" : "10"); | 
 | 		a->write_bcr(ioaddr, 49, media); | 
 | 		break; | 
 | 	case 0x2627: | 
 | 		chipname = "PCnet/FAST III 79C975";	/* PCI */ | 
 | 		fdx = 1; | 
 | 		mii = 1; | 
 | 		break; | 
 | 	case 0x2628: | 
 | 		chipname = "PCnet/PRO 79C976"; | 
 | 		fdx = 1; | 
 | 		mii = 1; | 
 | 		break; | 
 | 	default: | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_INFO PFX | 
 | 			       "PCnet version %#x, no PCnet32 chip.\n", | 
 | 			       chip_version); | 
 | 		goto err_release_region; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 *  On selected chips turn on the BCR18:NOUFLO bit. This stops transmit | 
 | 	 *  starting until the packet is loaded. Strike one for reliability, lose | 
 | 	 *  one for latency - although on PCI this isnt a big loss. Older chips | 
 | 	 *  have FIFO's smaller than a packet, so you can't do this. | 
 | 	 *  Turn on BCR18:BurstRdEn and BCR18:BurstWrEn. | 
 | 	 */ | 
 |  | 
 | 	if (fset) { | 
 | 		a->write_bcr(ioaddr, 18, (a->read_bcr(ioaddr, 18) | 0x0860)); | 
 | 		a->write_csr(ioaddr, 80, | 
 | 			     (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00); | 
 | 		dxsuflo = 1; | 
 | 	} | 
 |  | 
 | 	dev = alloc_etherdev(0); | 
 | 	if (!dev) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX "Memory allocation failed.\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_release_region; | 
 | 	} | 
 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 |  | 
 | 	if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 		printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr); | 
 |  | 
 | 	/* In most chips, after a chip reset, the ethernet address is read from the | 
 | 	 * station address PROM at the base address and programmed into the | 
 | 	 * "Physical Address Registers" CSR12-14. | 
 | 	 * As a precautionary measure, we read the PROM values and complain if | 
 | 	 * they disagree with the CSRs.  If they miscompare, and the PROM addr | 
 | 	 * is valid, then the PROM addr is used. | 
 | 	 */ | 
 | 	for (i = 0; i < 3; i++) { | 
 | 		unsigned int val; | 
 | 		val = a->read_csr(ioaddr, i + 12) & 0x0ffff; | 
 | 		/* There may be endianness issues here. */ | 
 | 		dev->dev_addr[2 * i] = val & 0x0ff; | 
 | 		dev->dev_addr[2 * i + 1] = (val >> 8) & 0x0ff; | 
 | 	} | 
 |  | 
 | 	/* read PROM address and compare with CSR address */ | 
 | 	for (i = 0; i < 6; i++) | 
 | 		promaddr[i] = inb(ioaddr + i); | 
 |  | 
 | 	if (memcmp(promaddr, dev->dev_addr, 6) | 
 | 	    || !is_valid_ether_addr(dev->dev_addr)) { | 
 | 		if (is_valid_ether_addr(promaddr)) { | 
 | 			if (pcnet32_debug & NETIF_MSG_PROBE) { | 
 | 				printk(" warning: CSR address invalid,\n"); | 
 | 				printk(KERN_INFO | 
 | 				       "    using instead PROM address of"); | 
 | 			} | 
 | 			memcpy(dev->dev_addr, promaddr, 6); | 
 | 		} | 
 | 	} | 
 | 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); | 
 |  | 
 | 	/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ | 
 | 	if (!is_valid_ether_addr(dev->perm_addr)) | 
 | 		memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); | 
 |  | 
 | 	if (pcnet32_debug & NETIF_MSG_PROBE) { | 
 | 		for (i = 0; i < 6; i++) | 
 | 			printk(" %2.2x", dev->dev_addr[i]); | 
 |  | 
 | 		/* Version 0x2623 and 0x2624 */ | 
 | 		if (((chip_version + 1) & 0xfffe) == 0x2624) { | 
 | 			i = a->read_csr(ioaddr, 80) & 0x0C00;	/* Check tx_start_pt */ | 
 | 			printk("\n" KERN_INFO "    tx_start_pt(0x%04x):", i); | 
 | 			switch (i >> 10) { | 
 | 			case 0: | 
 | 				printk("  20 bytes,"); | 
 | 				break; | 
 | 			case 1: | 
 | 				printk("  64 bytes,"); | 
 | 				break; | 
 | 			case 2: | 
 | 				printk(" 128 bytes,"); | 
 | 				break; | 
 | 			case 3: | 
 | 				printk("~220 bytes,"); | 
 | 				break; | 
 | 			} | 
 | 			i = a->read_bcr(ioaddr, 18);	/* Check Burst/Bus control */ | 
 | 			printk(" BCR18(%x):", i & 0xffff); | 
 | 			if (i & (1 << 5)) | 
 | 				printk("BurstWrEn "); | 
 | 			if (i & (1 << 6)) | 
 | 				printk("BurstRdEn "); | 
 | 			if (i & (1 << 7)) | 
 | 				printk("DWordIO "); | 
 | 			if (i & (1 << 11)) | 
 | 				printk("NoUFlow "); | 
 | 			i = a->read_bcr(ioaddr, 25); | 
 | 			printk("\n" KERN_INFO "    SRAMSIZE=0x%04x,", i << 8); | 
 | 			i = a->read_bcr(ioaddr, 26); | 
 | 			printk(" SRAM_BND=0x%04x,", i << 8); | 
 | 			i = a->read_bcr(ioaddr, 27); | 
 | 			if (i & (1 << 14)) | 
 | 				printk("LowLatRx"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev->base_addr = ioaddr; | 
 | 	/* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */ | 
 | 	if ((lp = | 
 | 	     pci_alloc_consistent(pdev, sizeof(*lp), &lp_dma_addr)) == NULL) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX | 
 | 			       "Consistent memory allocation failed.\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_netdev; | 
 | 	} | 
 |  | 
 | 	memset(lp, 0, sizeof(*lp)); | 
 | 	lp->dma_addr = lp_dma_addr; | 
 | 	lp->pci_dev = pdev; | 
 |  | 
 | 	spin_lock_init(&lp->lock); | 
 |  | 
 | 	SET_MODULE_OWNER(dev); | 
 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 | 	dev->priv = lp; | 
 | 	lp->name = chipname; | 
 | 	lp->shared_irq = shared; | 
 | 	lp->tx_ring_size = TX_RING_SIZE;	/* default tx ring size */ | 
 | 	lp->rx_ring_size = RX_RING_SIZE;	/* default rx ring size */ | 
 | 	lp->tx_mod_mask = lp->tx_ring_size - 1; | 
 | 	lp->rx_mod_mask = lp->rx_ring_size - 1; | 
 | 	lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12); | 
 | 	lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4); | 
 | 	lp->mii_if.full_duplex = fdx; | 
 | 	lp->mii_if.phy_id_mask = 0x1f; | 
 | 	lp->mii_if.reg_num_mask = 0x1f; | 
 | 	lp->dxsuflo = dxsuflo; | 
 | 	lp->mii = mii; | 
 | 	lp->msg_enable = pcnet32_debug; | 
 | 	if ((cards_found >= MAX_UNITS) | 
 | 	    || (options[cards_found] > sizeof(options_mapping))) | 
 | 		lp->options = PCNET32_PORT_ASEL; | 
 | 	else | 
 | 		lp->options = options_mapping[options[cards_found]]; | 
 | 	lp->mii_if.dev = dev; | 
 | 	lp->mii_if.mdio_read = mdio_read; | 
 | 	lp->mii_if.mdio_write = mdio_write; | 
 |  | 
 | 	if (fdx && !(lp->options & PCNET32_PORT_ASEL) && | 
 | 	    ((cards_found >= MAX_UNITS) || full_duplex[cards_found])) | 
 | 		lp->options |= PCNET32_PORT_FD; | 
 |  | 
 | 	if (!a) { | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(KERN_ERR PFX "No access methods\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_free_consistent; | 
 | 	} | 
 | 	lp->a = *a; | 
 |  | 
 | 	/* prior to register_netdev, dev->name is not yet correct */ | 
 | 	if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_ring; | 
 | 	} | 
 | 	/* detect special T1/E1 WAN card by checking for MAC address */ | 
 | 	if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 | 
 | 	    && dev->dev_addr[2] == 0x75) | 
 | 		lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; | 
 |  | 
 | 	lp->init_block.mode = le16_to_cpu(0x0003);	/* Disable Rx and Tx. */ | 
 | 	lp->init_block.tlen_rlen = | 
 | 	    le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); | 
 | 	for (i = 0; i < 6; i++) | 
 | 		lp->init_block.phys_addr[i] = dev->dev_addr[i]; | 
 | 	lp->init_block.filter[0] = 0x00000000; | 
 | 	lp->init_block.filter[1] = 0x00000000; | 
 | 	lp->init_block.rx_ring = (u32) le32_to_cpu(lp->rx_ring_dma_addr); | 
 | 	lp->init_block.tx_ring = (u32) le32_to_cpu(lp->tx_ring_dma_addr); | 
 |  | 
 | 	/* switch pcnet32 to 32bit mode */ | 
 | 	a->write_bcr(ioaddr, 20, 2); | 
 |  | 
 | 	a->write_csr(ioaddr, 1, (lp->dma_addr + offsetof(struct pcnet32_private, | 
 | 							 init_block)) & 0xffff); | 
 | 	a->write_csr(ioaddr, 2, (lp->dma_addr + offsetof(struct pcnet32_private, | 
 | 							 init_block)) >> 16); | 
 |  | 
 | 	if (pdev) {		/* use the IRQ provided by PCI */ | 
 | 		dev->irq = pdev->irq; | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(" assigned IRQ %d.\n", dev->irq); | 
 | 	} else { | 
 | 		unsigned long irq_mask = probe_irq_on(); | 
 |  | 
 | 		/* | 
 | 		 * To auto-IRQ we enable the initialization-done and DMA error | 
 | 		 * interrupts. For ISA boards we get a DMA error, but VLB and PCI | 
 | 		 * boards will work. | 
 | 		 */ | 
 | 		/* Trigger an initialization just for the interrupt. */ | 
 | 		a->write_csr(ioaddr, 0, 0x41); | 
 | 		mdelay(1); | 
 |  | 
 | 		dev->irq = probe_irq_off(irq_mask); | 
 | 		if (!dev->irq) { | 
 | 			if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 				printk(", failed to detect IRQ line.\n"); | 
 | 			ret = -ENODEV; | 
 | 			goto err_free_ring; | 
 | 		} | 
 | 		if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 			printk(", probed IRQ %d.\n", dev->irq); | 
 | 	} | 
 |  | 
 | 	/* Set the mii phy_id so that we can query the link state */ | 
 | 	if (lp->mii) { | 
 | 		/* lp->phycount and lp->phymask are set to 0 by memset above */ | 
 |  | 
 | 		lp->mii_if.phy_id = ((lp->a.read_bcr(ioaddr, 33)) >> 5) & 0x1f; | 
 | 		/* scan for PHYs */ | 
 | 		for (i = 0; i < PCNET32_MAX_PHYS; i++) { | 
 | 			unsigned short id1, id2; | 
 |  | 
 | 			id1 = mdio_read(dev, i, MII_PHYSID1); | 
 | 			if (id1 == 0xffff) | 
 | 				continue; | 
 | 			id2 = mdio_read(dev, i, MII_PHYSID2); | 
 | 			if (id2 == 0xffff) | 
 | 				continue; | 
 | 			if (i == 31 && ((chip_version + 1) & 0xfffe) == 0x2624) | 
 | 				continue;	/* 79C971 & 79C972 have phantom phy at id 31 */ | 
 | 			lp->phycount++; | 
 | 			lp->phymask |= (1 << i); | 
 | 			lp->mii_if.phy_id = i; | 
 | 			if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 				printk(KERN_INFO PFX | 
 | 				       "Found PHY %04x:%04x at address %d.\n", | 
 | 				       id1, id2, i); | 
 | 		} | 
 | 		lp->a.write_bcr(ioaddr, 33, (lp->mii_if.phy_id) << 5); | 
 | 		if (lp->phycount > 1) { | 
 | 			lp->options |= PCNET32_PORT_MII; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	init_timer(&lp->watchdog_timer); | 
 | 	lp->watchdog_timer.data = (unsigned long)dev; | 
 | 	lp->watchdog_timer.function = (void *)&pcnet32_watchdog; | 
 |  | 
 | 	/* The PCNET32-specific entries in the device structure. */ | 
 | 	dev->open = &pcnet32_open; | 
 | 	dev->hard_start_xmit = &pcnet32_start_xmit; | 
 | 	dev->stop = &pcnet32_close; | 
 | 	dev->get_stats = &pcnet32_get_stats; | 
 | 	dev->set_multicast_list = &pcnet32_set_multicast_list; | 
 | 	dev->do_ioctl = &pcnet32_ioctl; | 
 | 	dev->ethtool_ops = &pcnet32_ethtool_ops; | 
 | 	dev->tx_timeout = pcnet32_tx_timeout; | 
 | 	dev->watchdog_timeo = (5 * HZ); | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	dev->poll_controller = pcnet32_poll_controller; | 
 | #endif | 
 |  | 
 | 	/* Fill in the generic fields of the device structure. */ | 
 | 	if (register_netdev(dev)) | 
 | 		goto err_free_ring; | 
 |  | 
 | 	if (pdev) { | 
 | 		pci_set_drvdata(pdev, dev); | 
 | 	} else { | 
 | 		lp->next = pcnet32_dev; | 
 | 		pcnet32_dev = dev; | 
 | 	} | 
 |  | 
 | 	if (pcnet32_debug & NETIF_MSG_PROBE) | 
 | 		printk(KERN_INFO "%s: registered as %s\n", dev->name, lp->name); | 
 | 	cards_found++; | 
 |  | 
 | 	/* enable LED writes */ | 
 | 	a->write_bcr(ioaddr, 2, a->read_bcr(ioaddr, 2) | 0x1000); | 
 |  | 
 | 	return 0; | 
 |  | 
 |       err_free_ring: | 
 | 	pcnet32_free_ring(dev); | 
 |       err_free_consistent: | 
 | 	pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); | 
 |       err_free_netdev: | 
 | 	free_netdev(dev); | 
 |       err_release_region: | 
 | 	release_region(ioaddr, PCNET32_TOTAL_SIZE); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* if any allocation fails, caller must also call pcnet32_free_ring */ | 
 | static int pcnet32_alloc_ring(struct net_device *dev, char *name) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 	lp->tx_ring = pci_alloc_consistent(lp->pci_dev, | 
 | 					   sizeof(struct pcnet32_tx_head) * | 
 | 					   lp->tx_ring_size, | 
 | 					   &lp->tx_ring_dma_addr); | 
 | 	if (lp->tx_ring == NULL) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Consistent memory allocation failed.\n", | 
 | 			       name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	lp->rx_ring = pci_alloc_consistent(lp->pci_dev, | 
 | 					   sizeof(struct pcnet32_rx_head) * | 
 | 					   lp->rx_ring_size, | 
 | 					   &lp->rx_ring_dma_addr); | 
 | 	if (lp->rx_ring == NULL) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Consistent memory allocation failed.\n", | 
 | 			       name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, | 
 | 				  GFP_ATOMIC); | 
 | 	if (!lp->tx_dma_addr) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Memory allocation failed.\n", name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); | 
 |  | 
 | 	lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, | 
 | 				  GFP_ATOMIC); | 
 | 	if (!lp->rx_dma_addr) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Memory allocation failed.\n", name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); | 
 |  | 
 | 	lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, | 
 | 				GFP_ATOMIC); | 
 | 	if (!lp->tx_skbuff) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Memory allocation failed.\n", name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); | 
 |  | 
 | 	lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, | 
 | 				GFP_ATOMIC); | 
 | 	if (!lp->rx_skbuff) { | 
 | 		if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 			printk("\n" KERN_ERR PFX | 
 | 			       "%s: Memory allocation failed.\n", name); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pcnet32_free_ring(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 	kfree(lp->tx_skbuff); | 
 | 	lp->tx_skbuff = NULL; | 
 |  | 
 | 	kfree(lp->rx_skbuff); | 
 | 	lp->rx_skbuff = NULL; | 
 |  | 
 | 	kfree(lp->tx_dma_addr); | 
 | 	lp->tx_dma_addr = NULL; | 
 |  | 
 | 	kfree(lp->rx_dma_addr); | 
 | 	lp->rx_dma_addr = NULL; | 
 |  | 
 | 	if (lp->tx_ring) { | 
 | 		pci_free_consistent(lp->pci_dev, | 
 | 				    sizeof(struct pcnet32_tx_head) * | 
 | 				    lp->tx_ring_size, lp->tx_ring, | 
 | 				    lp->tx_ring_dma_addr); | 
 | 		lp->tx_ring = NULL; | 
 | 	} | 
 |  | 
 | 	if (lp->rx_ring) { | 
 | 		pci_free_consistent(lp->pci_dev, | 
 | 				    sizeof(struct pcnet32_rx_head) * | 
 | 				    lp->rx_ring_size, lp->rx_ring, | 
 | 				    lp->rx_ring_dma_addr); | 
 | 		lp->rx_ring = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int pcnet32_open(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	u16 val; | 
 | 	int i; | 
 | 	int rc; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (request_irq(dev->irq, &pcnet32_interrupt, | 
 | 			lp->shared_irq ? SA_SHIRQ : 0, dev->name, | 
 | 			(void *)dev)) { | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	/* Check for a valid station address */ | 
 | 	if (!is_valid_ether_addr(dev->dev_addr)) { | 
 | 		rc = -EINVAL; | 
 | 		goto err_free_irq; | 
 | 	} | 
 |  | 
 | 	/* Reset the PCNET32 */ | 
 | 	lp->a.reset(ioaddr); | 
 |  | 
 | 	/* switch pcnet32 to 32bit mode */ | 
 | 	lp->a.write_bcr(ioaddr, 20, 2); | 
 |  | 
 | 	if (netif_msg_ifup(lp)) | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n", | 
 | 		       dev->name, dev->irq, (u32) (lp->tx_ring_dma_addr), | 
 | 		       (u32) (lp->rx_ring_dma_addr), | 
 | 		       (u32) (lp->dma_addr + | 
 | 			      offsetof(struct pcnet32_private, init_block))); | 
 |  | 
 | 	/* set/reset autoselect bit */ | 
 | 	val = lp->a.read_bcr(ioaddr, 2) & ~2; | 
 | 	if (lp->options & PCNET32_PORT_ASEL) | 
 | 		val |= 2; | 
 | 	lp->a.write_bcr(ioaddr, 2, val); | 
 |  | 
 | 	/* handle full duplex setting */ | 
 | 	if (lp->mii_if.full_duplex) { | 
 | 		val = lp->a.read_bcr(ioaddr, 9) & ~3; | 
 | 		if (lp->options & PCNET32_PORT_FD) { | 
 | 			val |= 1; | 
 | 			if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI)) | 
 | 				val |= 2; | 
 | 		} else if (lp->options & PCNET32_PORT_ASEL) { | 
 | 			/* workaround of xSeries250, turn on for 79C975 only */ | 
 | 			i = ((lp->a.read_csr(ioaddr, 88) | | 
 | 			      (lp->a. | 
 | 			       read_csr(ioaddr, 89) << 16)) >> 12) & 0xffff; | 
 | 			if (i == 0x2627) | 
 | 				val |= 3; | 
 | 		} | 
 | 		lp->a.write_bcr(ioaddr, 9, val); | 
 | 	} | 
 |  | 
 | 	/* set/reset GPSI bit in test register */ | 
 | 	val = lp->a.read_csr(ioaddr, 124) & ~0x10; | 
 | 	if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI) | 
 | 		val |= 0x10; | 
 | 	lp->a.write_csr(ioaddr, 124, val); | 
 |  | 
 | 	/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */ | 
 | 	if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT && | 
 | 	    (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX || | 
 | 	     lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) { | 
 | 		if (lp->options & PCNET32_PORT_ASEL) { | 
 | 			lp->options = PCNET32_PORT_FD | PCNET32_PORT_100; | 
 | 			if (netif_msg_link(lp)) | 
 | 				printk(KERN_DEBUG | 
 | 				       "%s: Setting 100Mb-Full Duplex.\n", | 
 | 				       dev->name); | 
 | 		} | 
 | 	} | 
 | 	if (lp->phycount < 2) { | 
 | 		/* | 
 | 		 * 24 Jun 2004 according AMD, in order to change the PHY, | 
 | 		 * DANAS (or DISPM for 79C976) must be set; then select the speed, | 
 | 		 * duplex, and/or enable auto negotiation, and clear DANAS | 
 | 		 */ | 
 | 		if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) { | 
 | 			lp->a.write_bcr(ioaddr, 32, | 
 | 					lp->a.read_bcr(ioaddr, 32) | 0x0080); | 
 | 			/* disable Auto Negotiation, set 10Mpbs, HD */ | 
 | 			val = lp->a.read_bcr(ioaddr, 32) & ~0xb8; | 
 | 			if (lp->options & PCNET32_PORT_FD) | 
 | 				val |= 0x10; | 
 | 			if (lp->options & PCNET32_PORT_100) | 
 | 				val |= 0x08; | 
 | 			lp->a.write_bcr(ioaddr, 32, val); | 
 | 		} else { | 
 | 			if (lp->options & PCNET32_PORT_ASEL) { | 
 | 				lp->a.write_bcr(ioaddr, 32, | 
 | 						lp->a.read_bcr(ioaddr, | 
 | 							       32) | 0x0080); | 
 | 				/* enable auto negotiate, setup, disable fd */ | 
 | 				val = lp->a.read_bcr(ioaddr, 32) & ~0x98; | 
 | 				val |= 0x20; | 
 | 				lp->a.write_bcr(ioaddr, 32, val); | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		int first_phy = -1; | 
 | 		u16 bmcr; | 
 | 		u32 bcr9; | 
 | 		struct ethtool_cmd ecmd; | 
 |  | 
 | 		/* | 
 | 		 * There is really no good other way to handle multiple PHYs | 
 | 		 * other than turning off all automatics | 
 | 		 */ | 
 | 		val = lp->a.read_bcr(ioaddr, 2); | 
 | 		lp->a.write_bcr(ioaddr, 2, val & ~2); | 
 | 		val = lp->a.read_bcr(ioaddr, 32); | 
 | 		lp->a.write_bcr(ioaddr, 32, val & ~(1 << 7));	/* stop MII manager */ | 
 |  | 
 | 		if (!(lp->options & PCNET32_PORT_ASEL)) { | 
 | 			/* setup ecmd */ | 
 | 			ecmd.port = PORT_MII; | 
 | 			ecmd.transceiver = XCVR_INTERNAL; | 
 | 			ecmd.autoneg = AUTONEG_DISABLE; | 
 | 			ecmd.speed = | 
 | 			    lp-> | 
 | 			    options & PCNET32_PORT_100 ? SPEED_100 : SPEED_10; | 
 | 			bcr9 = lp->a.read_bcr(ioaddr, 9); | 
 |  | 
 | 			if (lp->options & PCNET32_PORT_FD) { | 
 | 				ecmd.duplex = DUPLEX_FULL; | 
 | 				bcr9 |= (1 << 0); | 
 | 			} else { | 
 | 				ecmd.duplex = DUPLEX_HALF; | 
 | 				bcr9 |= ~(1 << 0); | 
 | 			} | 
 | 			lp->a.write_bcr(ioaddr, 9, bcr9); | 
 | 		} | 
 |  | 
 | 		for (i = 0; i < PCNET32_MAX_PHYS; i++) { | 
 | 			if (lp->phymask & (1 << i)) { | 
 | 				/* isolate all but the first PHY */ | 
 | 				bmcr = mdio_read(dev, i, MII_BMCR); | 
 | 				if (first_phy == -1) { | 
 | 					first_phy = i; | 
 | 					mdio_write(dev, i, MII_BMCR, | 
 | 						   bmcr & ~BMCR_ISOLATE); | 
 | 				} else { | 
 | 					mdio_write(dev, i, MII_BMCR, | 
 | 						   bmcr | BMCR_ISOLATE); | 
 | 				} | 
 | 				/* use mii_ethtool_sset to setup PHY */ | 
 | 				lp->mii_if.phy_id = i; | 
 | 				ecmd.phy_address = i; | 
 | 				if (lp->options & PCNET32_PORT_ASEL) { | 
 | 					mii_ethtool_gset(&lp->mii_if, &ecmd); | 
 | 					ecmd.autoneg = AUTONEG_ENABLE; | 
 | 				} | 
 | 				mii_ethtool_sset(&lp->mii_if, &ecmd); | 
 | 			} | 
 | 		} | 
 | 		lp->mii_if.phy_id = first_phy; | 
 | 		if (netif_msg_link(lp)) | 
 | 			printk(KERN_INFO "%s: Using PHY number %d.\n", | 
 | 			       dev->name, first_phy); | 
 | 	} | 
 |  | 
 | #ifdef DO_DXSUFLO | 
 | 	if (lp->dxsuflo) {	/* Disable transmit stop on underflow */ | 
 | 		val = lp->a.read_csr(ioaddr, 3); | 
 | 		val |= 0x40; | 
 | 		lp->a.write_csr(ioaddr, 3, val); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	lp->init_block.mode = | 
 | 	    le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); | 
 | 	pcnet32_load_multicast(dev); | 
 |  | 
 | 	if (pcnet32_init_ring(dev)) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_free_ring; | 
 | 	} | 
 |  | 
 | 	/* Re-initialize the PCNET32, and start it when done. */ | 
 | 	lp->a.write_csr(ioaddr, 1, (lp->dma_addr + | 
 | 				    offsetof(struct pcnet32_private, | 
 | 					     init_block)) & 0xffff); | 
 | 	lp->a.write_csr(ioaddr, 2, | 
 | 			(lp->dma_addr + | 
 | 			 offsetof(struct pcnet32_private, init_block)) >> 16); | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 4, 0x0915); | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0001); | 
 |  | 
 | 	netif_start_queue(dev); | 
 |  | 
 | 	/* Print the link status and start the watchdog */ | 
 | 	pcnet32_check_media(dev, 1); | 
 | 	mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); | 
 |  | 
 | 	i = 0; | 
 | 	while (i++ < 100) | 
 | 		if (lp->a.read_csr(ioaddr, 0) & 0x0100) | 
 | 			break; | 
 | 	/* | 
 | 	 * We used to clear the InitDone bit, 0x0100, here but Mark Stockton | 
 | 	 * reports that doing so triggers a bug in the '974. | 
 | 	 */ | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0042); | 
 |  | 
 | 	if (netif_msg_ifup(lp)) | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: pcnet32 open after %d ticks, init block %#x csr0 %4.4x.\n", | 
 | 		       dev->name, i, | 
 | 		       (u32) (lp->dma_addr + | 
 | 			      offsetof(struct pcnet32_private, init_block)), | 
 | 		       lp->a.read_csr(ioaddr, 0)); | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	return 0;		/* Always succeed */ | 
 |  | 
 |       err_free_ring: | 
 | 	/* free any allocated skbuffs */ | 
 | 	for (i = 0; i < lp->rx_ring_size; i++) { | 
 | 		lp->rx_ring[i].status = 0; | 
 | 		if (lp->rx_skbuff[i]) { | 
 | 			pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], | 
 | 					 PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); | 
 | 			dev_kfree_skb(lp->rx_skbuff[i]); | 
 | 		} | 
 | 		lp->rx_skbuff[i] = NULL; | 
 | 		lp->rx_dma_addr[i] = 0; | 
 | 	} | 
 |  | 
 | 	pcnet32_free_ring(dev); | 
 |  | 
 | 	/* | 
 | 	 * Switch back to 16bit mode to avoid problems with dumb | 
 | 	 * DOS packet driver after a warm reboot | 
 | 	 */ | 
 | 	lp->a.write_bcr(ioaddr, 20, 4); | 
 |  | 
 |       err_free_irq: | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 | 	free_irq(dev->irq, dev); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * The LANCE has been halted for one reason or another (busmaster memory | 
 |  * arbitration error, Tx FIFO underflow, driver stopped it to reconfigure, | 
 |  * etc.).  Modern LANCE variants always reload their ring-buffer | 
 |  * configuration when restarted, so we must reinitialize our ring | 
 |  * context before restarting.  As part of this reinitialization, | 
 |  * find all packets still on the Tx ring and pretend that they had been | 
 |  * sent (in effect, drop the packets on the floor) - the higher-level | 
 |  * protocols will time out and retransmit.  It'd be better to shuffle | 
 |  * these skbs to a temp list and then actually re-Tx them after | 
 |  * restarting the chip, but I'm too lazy to do so right now.  dplatt@3do.com | 
 |  */ | 
 |  | 
 | static void pcnet32_purge_tx_ring(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < lp->tx_ring_size; i++) { | 
 | 		lp->tx_ring[i].status = 0;	/* CPU owns buffer */ | 
 | 		wmb();		/* Make sure adapter sees owner change */ | 
 | 		if (lp->tx_skbuff[i]) { | 
 | 			pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], | 
 | 					 lp->tx_skbuff[i]->len, | 
 | 					 PCI_DMA_TODEVICE); | 
 | 			dev_kfree_skb_any(lp->tx_skbuff[i]); | 
 | 		} | 
 | 		lp->tx_skbuff[i] = NULL; | 
 | 		lp->tx_dma_addr[i] = 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* Initialize the PCNET32 Rx and Tx rings. */ | 
 | static int pcnet32_init_ring(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int i; | 
 |  | 
 | 	lp->tx_full = 0; | 
 | 	lp->cur_rx = lp->cur_tx = 0; | 
 | 	lp->dirty_rx = lp->dirty_tx = 0; | 
 |  | 
 | 	for (i = 0; i < lp->rx_ring_size; i++) { | 
 | 		struct sk_buff *rx_skbuff = lp->rx_skbuff[i]; | 
 | 		if (rx_skbuff == NULL) { | 
 | 			if (! | 
 | 			    (rx_skbuff = lp->rx_skbuff[i] = | 
 | 			     dev_alloc_skb(PKT_BUF_SZ))) { | 
 | 				/* there is not much, we can do at this point */ | 
 | 				if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 					printk(KERN_ERR | 
 | 					       "%s: pcnet32_init_ring dev_alloc_skb failed.\n", | 
 | 					       dev->name); | 
 | 				return -1; | 
 | 			} | 
 | 			skb_reserve(rx_skbuff, 2); | 
 | 		} | 
 |  | 
 | 		rmb(); | 
 | 		if (lp->rx_dma_addr[i] == 0) | 
 | 			lp->rx_dma_addr[i] = | 
 | 			    pci_map_single(lp->pci_dev, rx_skbuff->data, | 
 | 					   PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); | 
 | 		lp->rx_ring[i].base = (u32) le32_to_cpu(lp->rx_dma_addr[i]); | 
 | 		lp->rx_ring[i].buf_length = le16_to_cpu(2 - PKT_BUF_SZ); | 
 | 		wmb();		/* Make sure owner changes after all others are visible */ | 
 | 		lp->rx_ring[i].status = le16_to_cpu(0x8000); | 
 | 	} | 
 | 	/* The Tx buffer address is filled in as needed, but we do need to clear | 
 | 	 * the upper ownership bit. */ | 
 | 	for (i = 0; i < lp->tx_ring_size; i++) { | 
 | 		lp->tx_ring[i].status = 0;	/* CPU owns buffer */ | 
 | 		wmb();		/* Make sure adapter sees owner change */ | 
 | 		lp->tx_ring[i].base = 0; | 
 | 		lp->tx_dma_addr[i] = 0; | 
 | 	} | 
 |  | 
 | 	lp->init_block.tlen_rlen = | 
 | 	    le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); | 
 | 	for (i = 0; i < 6; i++) | 
 | 		lp->init_block.phys_addr[i] = dev->dev_addr[i]; | 
 | 	lp->init_block.rx_ring = (u32) le32_to_cpu(lp->rx_ring_dma_addr); | 
 | 	lp->init_block.tx_ring = (u32) le32_to_cpu(lp->tx_ring_dma_addr); | 
 | 	wmb();			/* Make sure all changes are visible */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* the pcnet32 has been issued a stop or reset.  Wait for the stop bit | 
 |  * then flush the pending transmit operations, re-initialize the ring, | 
 |  * and tell the chip to initialize. | 
 |  */ | 
 | static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	int i; | 
 |  | 
 | 	/* wait for stop */ | 
 | 	for (i = 0; i < 100; i++) | 
 | 		if (lp->a.read_csr(ioaddr, 0) & 0x0004) | 
 | 			break; | 
 |  | 
 | 	if (i >= 100 && netif_msg_drv(lp)) | 
 | 		printk(KERN_ERR | 
 | 		       "%s: pcnet32_restart timed out waiting for stop.\n", | 
 | 		       dev->name); | 
 |  | 
 | 	pcnet32_purge_tx_ring(dev); | 
 | 	if (pcnet32_init_ring(dev)) | 
 | 		return; | 
 |  | 
 | 	/* ReInit Ring */ | 
 | 	lp->a.write_csr(ioaddr, 0, 1); | 
 | 	i = 0; | 
 | 	while (i++ < 1000) | 
 | 		if (lp->a.read_csr(ioaddr, 0) & 0x0100) | 
 | 			break; | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 0, csr0_bits); | 
 | } | 
 |  | 
 | static void pcnet32_tx_timeout(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr, flags; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	/* Transmitter timeout, serious problems. */ | 
 | 	if (pcnet32_debug & NETIF_MSG_DRV) | 
 | 		printk(KERN_ERR | 
 | 		       "%s: transmit timed out, status %4.4x, resetting.\n", | 
 | 		       dev->name, lp->a.read_csr(ioaddr, 0)); | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0004); | 
 | 	lp->stats.tx_errors++; | 
 | 	if (netif_msg_tx_err(lp)) { | 
 | 		int i; | 
 | 		printk(KERN_DEBUG | 
 | 		       " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", | 
 | 		       lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "", | 
 | 		       lp->cur_rx); | 
 | 		for (i = 0; i < lp->rx_ring_size; i++) | 
 | 			printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", | 
 | 			       le32_to_cpu(lp->rx_ring[i].base), | 
 | 			       (-le16_to_cpu(lp->rx_ring[i].buf_length)) & | 
 | 			       0xffff, le32_to_cpu(lp->rx_ring[i].msg_length), | 
 | 			       le16_to_cpu(lp->rx_ring[i].status)); | 
 | 		for (i = 0; i < lp->tx_ring_size; i++) | 
 | 			printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", | 
 | 			       le32_to_cpu(lp->tx_ring[i].base), | 
 | 			       (-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff, | 
 | 			       le32_to_cpu(lp->tx_ring[i].misc), | 
 | 			       le16_to_cpu(lp->tx_ring[i].status)); | 
 | 		printk("\n"); | 
 | 	} | 
 | 	pcnet32_restart(dev, 0x0042); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 | 	netif_wake_queue(dev); | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 | } | 
 |  | 
 | static int pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	u16 status; | 
 | 	int entry; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 |  | 
 | 	if (netif_msg_tx_queued(lp)) { | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: pcnet32_start_xmit() called, csr0 %4.4x.\n", | 
 | 		       dev->name, lp->a.read_csr(ioaddr, 0)); | 
 | 	} | 
 |  | 
 | 	/* Default status -- will not enable Successful-TxDone | 
 | 	 * interrupt when that option is available to us. | 
 | 	 */ | 
 | 	status = 0x8300; | 
 |  | 
 | 	/* Fill in a Tx ring entry */ | 
 |  | 
 | 	/* Mask to ring buffer boundary. */ | 
 | 	entry = lp->cur_tx & lp->tx_mod_mask; | 
 |  | 
 | 	/* Caution: the write order is important here, set the status | 
 | 	 * with the "ownership" bits last. */ | 
 |  | 
 | 	lp->tx_ring[entry].length = le16_to_cpu(-skb->len); | 
 |  | 
 | 	lp->tx_ring[entry].misc = 0x00000000; | 
 |  | 
 | 	lp->tx_skbuff[entry] = skb; | 
 | 	lp->tx_dma_addr[entry] = | 
 | 	    pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); | 
 | 	lp->tx_ring[entry].base = (u32) le32_to_cpu(lp->tx_dma_addr[entry]); | 
 | 	wmb();			/* Make sure owner changes after all others are visible */ | 
 | 	lp->tx_ring[entry].status = le16_to_cpu(status); | 
 |  | 
 | 	lp->cur_tx++; | 
 | 	lp->stats.tx_bytes += skb->len; | 
 |  | 
 | 	/* Trigger an immediate send poll. */ | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0048); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 |  | 
 | 	if (lp->tx_ring[(entry + 1) & lp->tx_mod_mask].base != 0) { | 
 | 		lp->tx_full = 1; | 
 | 		netif_stop_queue(dev); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* The PCNET32 interrupt handler. */ | 
 | static irqreturn_t | 
 | pcnet32_interrupt(int irq, void *dev_id, struct pt_regs *regs) | 
 | { | 
 | 	struct net_device *dev = dev_id; | 
 | 	struct pcnet32_private *lp; | 
 | 	unsigned long ioaddr; | 
 | 	u16 csr0, rap; | 
 | 	int boguscnt = max_interrupt_work; | 
 | 	int must_restart; | 
 |  | 
 | 	if (!dev) { | 
 | 		if (pcnet32_debug & NETIF_MSG_INTR) | 
 | 			printk(KERN_DEBUG "%s(): irq %d for unknown device\n", | 
 | 			       __FUNCTION__, irq); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	ioaddr = dev->base_addr; | 
 | 	lp = dev->priv; | 
 |  | 
 | 	spin_lock(&lp->lock); | 
 |  | 
 | 	rap = lp->a.read_rap(ioaddr); | 
 | 	while ((csr0 = lp->a.read_csr(ioaddr, 0)) & 0x8f00 && --boguscnt >= 0) { | 
 | 		if (csr0 == 0xffff) { | 
 | 			break;	/* PCMCIA remove happened */ | 
 | 		} | 
 | 		/* Acknowledge all of the current interrupt sources ASAP. */ | 
 | 		lp->a.write_csr(ioaddr, 0, csr0 & ~0x004f); | 
 |  | 
 | 		must_restart = 0; | 
 |  | 
 | 		if (netif_msg_intr(lp)) | 
 | 			printk(KERN_DEBUG | 
 | 			       "%s: interrupt  csr0=%#2.2x new csr=%#2.2x.\n", | 
 | 			       dev->name, csr0, lp->a.read_csr(ioaddr, 0)); | 
 |  | 
 | 		if (csr0 & 0x0400)	/* Rx interrupt */ | 
 | 			pcnet32_rx(dev); | 
 |  | 
 | 		if (csr0 & 0x0200) {	/* Tx-done interrupt */ | 
 | 			unsigned int dirty_tx = lp->dirty_tx; | 
 | 			int delta; | 
 |  | 
 | 			while (dirty_tx != lp->cur_tx) { | 
 | 				int entry = dirty_tx & lp->tx_mod_mask; | 
 | 				int status = | 
 | 				    (short)le16_to_cpu(lp->tx_ring[entry]. | 
 | 						       status); | 
 |  | 
 | 				if (status < 0) | 
 | 					break;	/* It still hasn't been Txed */ | 
 |  | 
 | 				lp->tx_ring[entry].base = 0; | 
 |  | 
 | 				if (status & 0x4000) { | 
 | 					/* There was an major error, log it. */ | 
 | 					int err_status = | 
 | 					    le32_to_cpu(lp->tx_ring[entry]. | 
 | 							misc); | 
 | 					lp->stats.tx_errors++; | 
 | 					if (netif_msg_tx_err(lp)) | 
 | 						printk(KERN_ERR | 
 | 						       "%s: Tx error status=%04x err_status=%08x\n", | 
 | 						       dev->name, status, | 
 | 						       err_status); | 
 | 					if (err_status & 0x04000000) | 
 | 						lp->stats.tx_aborted_errors++; | 
 | 					if (err_status & 0x08000000) | 
 | 						lp->stats.tx_carrier_errors++; | 
 | 					if (err_status & 0x10000000) | 
 | 						lp->stats.tx_window_errors++; | 
 | #ifndef DO_DXSUFLO | 
 | 					if (err_status & 0x40000000) { | 
 | 						lp->stats.tx_fifo_errors++; | 
 | 						/* Ackk!  On FIFO errors the Tx unit is turned off! */ | 
 | 						/* Remove this verbosity later! */ | 
 | 						if (netif_msg_tx_err(lp)) | 
 | 							printk(KERN_ERR | 
 | 							       "%s: Tx FIFO error! CSR0=%4.4x\n", | 
 | 							       dev->name, csr0); | 
 | 						must_restart = 1; | 
 | 					} | 
 | #else | 
 | 					if (err_status & 0x40000000) { | 
 | 						lp->stats.tx_fifo_errors++; | 
 | 						if (!lp->dxsuflo) {	/* If controller doesn't recover ... */ | 
 | 							/* Ackk!  On FIFO errors the Tx unit is turned off! */ | 
 | 							/* Remove this verbosity later! */ | 
 | 							if (netif_msg_tx_err | 
 | 							    (lp)) | 
 | 								printk(KERN_ERR | 
 | 								       "%s: Tx FIFO error! CSR0=%4.4x\n", | 
 | 								       dev-> | 
 | 								       name, | 
 | 								       csr0); | 
 | 							must_restart = 1; | 
 | 						} | 
 | 					} | 
 | #endif | 
 | 				} else { | 
 | 					if (status & 0x1800) | 
 | 						lp->stats.collisions++; | 
 | 					lp->stats.tx_packets++; | 
 | 				} | 
 |  | 
 | 				/* We must free the original skb */ | 
 | 				if (lp->tx_skbuff[entry]) { | 
 | 					pci_unmap_single(lp->pci_dev, | 
 | 							 lp->tx_dma_addr[entry], | 
 | 							 lp->tx_skbuff[entry]-> | 
 | 							 len, PCI_DMA_TODEVICE); | 
 | 					dev_kfree_skb_irq(lp->tx_skbuff[entry]); | 
 | 					lp->tx_skbuff[entry] = NULL; | 
 | 					lp->tx_dma_addr[entry] = 0; | 
 | 				} | 
 | 				dirty_tx++; | 
 | 			} | 
 |  | 
 | 			delta = | 
 | 			    (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + | 
 | 						       lp->tx_ring_size); | 
 | 			if (delta > lp->tx_ring_size) { | 
 | 				if (netif_msg_drv(lp)) | 
 | 					printk(KERN_ERR | 
 | 					       "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n", | 
 | 					       dev->name, dirty_tx, lp->cur_tx, | 
 | 					       lp->tx_full); | 
 | 				dirty_tx += lp->tx_ring_size; | 
 | 				delta -= lp->tx_ring_size; | 
 | 			} | 
 |  | 
 | 			if (lp->tx_full && | 
 | 			    netif_queue_stopped(dev) && | 
 | 			    delta < lp->tx_ring_size - 2) { | 
 | 				/* The ring is no longer full, clear tbusy. */ | 
 | 				lp->tx_full = 0; | 
 | 				netif_wake_queue(dev); | 
 | 			} | 
 | 			lp->dirty_tx = dirty_tx; | 
 | 		} | 
 |  | 
 | 		/* Log misc errors. */ | 
 | 		if (csr0 & 0x4000) | 
 | 			lp->stats.tx_errors++;	/* Tx babble. */ | 
 | 		if (csr0 & 0x1000) { | 
 | 			/* | 
 | 			 * this happens when our receive ring is full. This shouldn't | 
 | 			 * be a problem as we will see normal rx interrupts for the frames | 
 | 			 * in the receive ring. But there are some PCI chipsets (I can | 
 | 			 * reproduce this on SP3G with Intel saturn chipset) which have | 
 | 			 * sometimes problems and will fill up the receive ring with | 
 | 			 * error descriptors. In this situation we don't get a rx | 
 | 			 * interrupt, but a missed frame interrupt sooner or later. | 
 | 			 * So we try to clean up our receive ring here. | 
 | 			 */ | 
 | 			pcnet32_rx(dev); | 
 | 			lp->stats.rx_errors++;	/* Missed a Rx frame. */ | 
 | 		} | 
 | 		if (csr0 & 0x0800) { | 
 | 			if (netif_msg_drv(lp)) | 
 | 				printk(KERN_ERR | 
 | 				       "%s: Bus master arbitration failure, status %4.4x.\n", | 
 | 				       dev->name, csr0); | 
 | 			/* unlike for the lance, there is no restart needed */ | 
 | 		} | 
 |  | 
 | 		if (must_restart) { | 
 | 			/* reset the chip to clear the error condition, then restart */ | 
 | 			lp->a.reset(ioaddr); | 
 | 			lp->a.write_csr(ioaddr, 4, 0x0915); | 
 | 			pcnet32_restart(dev, 0x0002); | 
 | 			netif_wake_queue(dev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set interrupt enable. */ | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0040); | 
 | 	lp->a.write_rap(ioaddr, rap); | 
 |  | 
 | 	if (netif_msg_intr(lp)) | 
 | 		printk(KERN_DEBUG "%s: exiting interrupt, csr0=%#4.4x.\n", | 
 | 		       dev->name, lp->a.read_csr(ioaddr, 0)); | 
 |  | 
 | 	spin_unlock(&lp->lock); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int pcnet32_rx(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int entry = lp->cur_rx & lp->rx_mod_mask; | 
 | 	int boguscnt = lp->rx_ring_size / 2; | 
 |  | 
 | 	/* If we own the next entry, it's a new packet. Send it up. */ | 
 | 	while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) { | 
 | 		int status = (short)le16_to_cpu(lp->rx_ring[entry].status) >> 8; | 
 |  | 
 | 		if (status != 0x03) {	/* There was an error. */ | 
 | 			/* | 
 | 			 * There is a tricky error noted by John Murphy, | 
 | 			 * <murf@perftech.com> to Russ Nelson: Even with full-sized | 
 | 			 * buffers it's possible for a jabber packet to use two | 
 | 			 * buffers, with only the last correctly noting the error. | 
 | 			 */ | 
 | 			if (status & 0x01)	/* Only count a general error at the */ | 
 | 				lp->stats.rx_errors++;	/* end of a packet. */ | 
 | 			if (status & 0x20) | 
 | 				lp->stats.rx_frame_errors++; | 
 | 			if (status & 0x10) | 
 | 				lp->stats.rx_over_errors++; | 
 | 			if (status & 0x08) | 
 | 				lp->stats.rx_crc_errors++; | 
 | 			if (status & 0x04) | 
 | 				lp->stats.rx_fifo_errors++; | 
 | 			lp->rx_ring[entry].status &= le16_to_cpu(0x03ff); | 
 | 		} else { | 
 | 			/* Malloc up new buffer, compatible with net-2e. */ | 
 | 			short pkt_len = | 
 | 			    (le32_to_cpu(lp->rx_ring[entry].msg_length) & 0xfff) | 
 | 			    - 4; | 
 | 			struct sk_buff *skb; | 
 |  | 
 | 			/* Discard oversize frames. */ | 
 | 			if (unlikely(pkt_len > PKT_BUF_SZ - 2)) { | 
 | 				if (netif_msg_drv(lp)) | 
 | 					printk(KERN_ERR | 
 | 					       "%s: Impossible packet size %d!\n", | 
 | 					       dev->name, pkt_len); | 
 | 				lp->stats.rx_errors++; | 
 | 			} else if (pkt_len < 60) { | 
 | 				if (netif_msg_rx_err(lp)) | 
 | 					printk(KERN_ERR "%s: Runt packet!\n", | 
 | 					       dev->name); | 
 | 				lp->stats.rx_errors++; | 
 | 			} else { | 
 | 				int rx_in_place = 0; | 
 |  | 
 | 				if (pkt_len > rx_copybreak) { | 
 | 					struct sk_buff *newskb; | 
 |  | 
 | 					if ((newskb = | 
 | 					     dev_alloc_skb(PKT_BUF_SZ))) { | 
 | 						skb_reserve(newskb, 2); | 
 | 						skb = lp->rx_skbuff[entry]; | 
 | 						pci_unmap_single(lp->pci_dev, | 
 | 								 lp-> | 
 | 								 rx_dma_addr | 
 | 								 [entry], | 
 | 								 PKT_BUF_SZ - 2, | 
 | 								 PCI_DMA_FROMDEVICE); | 
 | 						skb_put(skb, pkt_len); | 
 | 						lp->rx_skbuff[entry] = newskb; | 
 | 						newskb->dev = dev; | 
 | 						lp->rx_dma_addr[entry] = | 
 | 						    pci_map_single(lp->pci_dev, | 
 | 								   newskb->data, | 
 | 								   PKT_BUF_SZ - | 
 | 								   2, | 
 | 								   PCI_DMA_FROMDEVICE); | 
 | 						lp->rx_ring[entry].base = | 
 | 						    le32_to_cpu(lp-> | 
 | 								rx_dma_addr | 
 | 								[entry]); | 
 | 						rx_in_place = 1; | 
 | 					} else | 
 | 						skb = NULL; | 
 | 				} else { | 
 | 					skb = dev_alloc_skb(pkt_len + 2); | 
 | 				} | 
 |  | 
 | 				if (skb == NULL) { | 
 | 					int i; | 
 | 					if (netif_msg_drv(lp)) | 
 | 						printk(KERN_ERR | 
 | 						       "%s: Memory squeeze, deferring packet.\n", | 
 | 						       dev->name); | 
 | 					for (i = 0; i < lp->rx_ring_size; i++) | 
 | 						if ((short) | 
 | 						    le16_to_cpu(lp-> | 
 | 								rx_ring[(entry + | 
 | 									 i) | 
 | 									& lp-> | 
 | 									rx_mod_mask]. | 
 | 								status) < 0) | 
 | 							break; | 
 |  | 
 | 					if (i > lp->rx_ring_size - 2) { | 
 | 						lp->stats.rx_dropped++; | 
 | 						lp->rx_ring[entry].status |= | 
 | 						    le16_to_cpu(0x8000); | 
 | 						wmb();	/* Make sure adapter sees owner change */ | 
 | 						lp->cur_rx++; | 
 | 					} | 
 | 					break; | 
 | 				} | 
 | 				skb->dev = dev; | 
 | 				if (!rx_in_place) { | 
 | 					skb_reserve(skb, 2);	/* 16 byte align */ | 
 | 					skb_put(skb, pkt_len);	/* Make room */ | 
 | 					pci_dma_sync_single_for_cpu(lp->pci_dev, | 
 | 								    lp-> | 
 | 								    rx_dma_addr | 
 | 								    [entry], | 
 | 								    PKT_BUF_SZ - | 
 | 								    2, | 
 | 								    PCI_DMA_FROMDEVICE); | 
 | 					eth_copy_and_sum(skb, | 
 | 							 (unsigned char *)(lp-> | 
 | 									   rx_skbuff | 
 | 									   [entry]-> | 
 | 									   data), | 
 | 							 pkt_len, 0); | 
 | 					pci_dma_sync_single_for_device(lp-> | 
 | 								       pci_dev, | 
 | 								       lp-> | 
 | 								       rx_dma_addr | 
 | 								       [entry], | 
 | 								       PKT_BUF_SZ | 
 | 								       - 2, | 
 | 								       PCI_DMA_FROMDEVICE); | 
 | 				} | 
 | 				lp->stats.rx_bytes += skb->len; | 
 | 				skb->protocol = eth_type_trans(skb, dev); | 
 | 				netif_rx(skb); | 
 | 				dev->last_rx = jiffies; | 
 | 				lp->stats.rx_packets++; | 
 | 			} | 
 | 		} | 
 | 		/* | 
 | 		 * The docs say that the buffer length isn't touched, but Andrew Boyd | 
 | 		 * of QNX reports that some revs of the 79C965 clear it. | 
 | 		 */ | 
 | 		lp->rx_ring[entry].buf_length = le16_to_cpu(2 - PKT_BUF_SZ); | 
 | 		wmb();		/* Make sure owner changes after all others are visible */ | 
 | 		lp->rx_ring[entry].status |= le16_to_cpu(0x8000); | 
 | 		entry = (++lp->cur_rx) & lp->rx_mod_mask; | 
 | 		if (--boguscnt <= 0) | 
 | 			break;	/* don't stay in loop forever */ | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pcnet32_close(struct net_device *dev) | 
 | { | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int i; | 
 | 	unsigned long flags; | 
 |  | 
 | 	del_timer_sync(&lp->watchdog_timer); | 
 |  | 
 | 	netif_stop_queue(dev); | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 |  | 
 | 	lp->stats.rx_missed_errors = lp->a.read_csr(ioaddr, 112); | 
 |  | 
 | 	if (netif_msg_ifdown(lp)) | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: Shutting down ethercard, status was %2.2x.\n", | 
 | 		       dev->name, lp->a.read_csr(ioaddr, 0)); | 
 |  | 
 | 	/* We stop the PCNET32 here -- it occasionally polls memory if we don't. */ | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0004); | 
 |  | 
 | 	/* | 
 | 	 * Switch back to 16bit mode to avoid problems with dumb | 
 | 	 * DOS packet driver after a warm reboot | 
 | 	 */ | 
 | 	lp->a.write_bcr(ioaddr, 20, 4); | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	free_irq(dev->irq, dev); | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 |  | 
 | 	/* free all allocated skbuffs */ | 
 | 	for (i = 0; i < lp->rx_ring_size; i++) { | 
 | 		lp->rx_ring[i].status = 0; | 
 | 		wmb();		/* Make sure adapter sees owner change */ | 
 | 		if (lp->rx_skbuff[i]) { | 
 | 			pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], | 
 | 					 PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); | 
 | 			dev_kfree_skb(lp->rx_skbuff[i]); | 
 | 		} | 
 | 		lp->rx_skbuff[i] = NULL; | 
 | 		lp->rx_dma_addr[i] = 0; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < lp->tx_ring_size; i++) { | 
 | 		lp->tx_ring[i].status = 0;	/* CPU owns buffer */ | 
 | 		wmb();		/* Make sure adapter sees owner change */ | 
 | 		if (lp->tx_skbuff[i]) { | 
 | 			pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], | 
 | 					 lp->tx_skbuff[i]->len, | 
 | 					 PCI_DMA_TODEVICE); | 
 | 			dev_kfree_skb(lp->tx_skbuff[i]); | 
 | 		} | 
 | 		lp->tx_skbuff[i] = NULL; | 
 | 		lp->tx_dma_addr[i] = 0; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct net_device_stats *pcnet32_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	u16 saved_addr; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	saved_addr = lp->a.read_rap(ioaddr); | 
 | 	lp->stats.rx_missed_errors = lp->a.read_csr(ioaddr, 112); | 
 | 	lp->a.write_rap(ioaddr, saved_addr); | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	return &lp->stats; | 
 | } | 
 |  | 
 | /* taken from the sunlance driver, which it took from the depca driver */ | 
 | static void pcnet32_load_multicast(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	volatile struct pcnet32_init_block *ib = &lp->init_block; | 
 | 	volatile u16 *mcast_table = (u16 *) & ib->filter; | 
 | 	struct dev_mc_list *dmi = dev->mc_list; | 
 | 	char *addrs; | 
 | 	int i; | 
 | 	u32 crc; | 
 |  | 
 | 	/* set all multicast bits */ | 
 | 	if (dev->flags & IFF_ALLMULTI) { | 
 | 		ib->filter[0] = 0xffffffff; | 
 | 		ib->filter[1] = 0xffffffff; | 
 | 		return; | 
 | 	} | 
 | 	/* clear the multicast filter */ | 
 | 	ib->filter[0] = 0; | 
 | 	ib->filter[1] = 0; | 
 |  | 
 | 	/* Add addresses */ | 
 | 	for (i = 0; i < dev->mc_count; i++) { | 
 | 		addrs = dmi->dmi_addr; | 
 | 		dmi = dmi->next; | 
 |  | 
 | 		/* multicast address? */ | 
 | 		if (!(*addrs & 1)) | 
 | 			continue; | 
 |  | 
 | 		crc = ether_crc_le(6, addrs); | 
 | 		crc = crc >> 26; | 
 | 		mcast_table[crc >> 4] = | 
 | 		    le16_to_cpu(le16_to_cpu(mcast_table[crc >> 4]) | | 
 | 				(1 << (crc & 0xf))); | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * Set or clear the multicast filter for this adaptor. | 
 |  */ | 
 | static void pcnet32_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	unsigned long ioaddr = dev->base_addr, flags; | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	if (dev->flags & IFF_PROMISC) { | 
 | 		/* Log any net taps. */ | 
 | 		if (netif_msg_hw(lp)) | 
 | 			printk(KERN_INFO "%s: Promiscuous mode enabled.\n", | 
 | 			       dev->name); | 
 | 		lp->init_block.mode = | 
 | 		    le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << | 
 | 				7); | 
 | 	} else { | 
 | 		lp->init_block.mode = | 
 | 		    le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); | 
 | 		pcnet32_load_multicast(dev); | 
 | 	} | 
 |  | 
 | 	lp->a.write_csr(ioaddr, 0, 0x0004);	/* Temporarily stop the lance. */ | 
 | 	pcnet32_restart(dev, 0x0042);	/*  Resume normal operation */ | 
 | 	netif_wake_queue(dev); | 
 |  | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 | } | 
 |  | 
 | /* This routine assumes that the lp->lock is held */ | 
 | static int mdio_read(struct net_device *dev, int phy_id, int reg_num) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 | 	u16 val_out; | 
 |  | 
 | 	if (!lp->mii) | 
 | 		return 0; | 
 |  | 
 | 	lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); | 
 | 	val_out = lp->a.read_bcr(ioaddr, 34); | 
 |  | 
 | 	return val_out; | 
 | } | 
 |  | 
 | /* This routine assumes that the lp->lock is held */ | 
 | static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long ioaddr = dev->base_addr; | 
 |  | 
 | 	if (!lp->mii) | 
 | 		return; | 
 |  | 
 | 	lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); | 
 | 	lp->a.write_bcr(ioaddr, 34, val); | 
 | } | 
 |  | 
 | static int pcnet32_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int rc; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* SIOC[GS]MIIxxx ioctls */ | 
 | 	if (lp->mii) { | 
 | 		spin_lock_irqsave(&lp->lock, flags); | 
 | 		rc = generic_mii_ioctl(&lp->mii_if, if_mii(rq), cmd, NULL); | 
 | 		spin_unlock_irqrestore(&lp->lock, flags); | 
 | 	} else { | 
 | 		rc = -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int pcnet32_check_otherphy(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	struct mii_if_info mii = lp->mii_if; | 
 | 	u16 bmcr; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < PCNET32_MAX_PHYS; i++) { | 
 | 		if (i == lp->mii_if.phy_id) | 
 | 			continue;	/* skip active phy */ | 
 | 		if (lp->phymask & (1 << i)) { | 
 | 			mii.phy_id = i; | 
 | 			if (mii_link_ok(&mii)) { | 
 | 				/* found PHY with active link */ | 
 | 				if (netif_msg_link(lp)) | 
 | 					printk(KERN_INFO | 
 | 					       "%s: Using PHY number %d.\n", | 
 | 					       dev->name, i); | 
 |  | 
 | 				/* isolate inactive phy */ | 
 | 				bmcr = | 
 | 				    mdio_read(dev, lp->mii_if.phy_id, MII_BMCR); | 
 | 				mdio_write(dev, lp->mii_if.phy_id, MII_BMCR, | 
 | 					   bmcr | BMCR_ISOLATE); | 
 |  | 
 | 				/* de-isolate new phy */ | 
 | 				bmcr = mdio_read(dev, i, MII_BMCR); | 
 | 				mdio_write(dev, i, MII_BMCR, | 
 | 					   bmcr & ~BMCR_ISOLATE); | 
 |  | 
 | 				/* set new phy address */ | 
 | 				lp->mii_if.phy_id = i; | 
 | 				return 1; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Show the status of the media.  Similar to mii_check_media however it | 
 |  * correctly shows the link speed for all (tested) pcnet32 variants. | 
 |  * Devices with no mii just report link state without speed. | 
 |  * | 
 |  * Caller is assumed to hold and release the lp->lock. | 
 |  */ | 
 |  | 
 | static void pcnet32_check_media(struct net_device *dev, int verbose) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	int curr_link; | 
 | 	int prev_link = netif_carrier_ok(dev) ? 1 : 0; | 
 | 	u32 bcr9; | 
 |  | 
 | 	if (lp->mii) { | 
 | 		curr_link = mii_link_ok(&lp->mii_if); | 
 | 	} else { | 
 | 		ulong ioaddr = dev->base_addr;	/* card base I/O address */ | 
 | 		curr_link = (lp->a.read_bcr(ioaddr, 4) != 0xc0); | 
 | 	} | 
 | 	if (!curr_link) { | 
 | 		if (prev_link || verbose) { | 
 | 			netif_carrier_off(dev); | 
 | 			if (netif_msg_link(lp)) | 
 | 				printk(KERN_INFO "%s: link down\n", dev->name); | 
 | 		} | 
 | 		if (lp->phycount > 1) { | 
 | 			curr_link = pcnet32_check_otherphy(dev); | 
 | 			prev_link = 0; | 
 | 		} | 
 | 	} else if (verbose || !prev_link) { | 
 | 		netif_carrier_on(dev); | 
 | 		if (lp->mii) { | 
 | 			if (netif_msg_link(lp)) { | 
 | 				struct ethtool_cmd ecmd; | 
 | 				mii_ethtool_gset(&lp->mii_if, &ecmd); | 
 | 				printk(KERN_INFO | 
 | 				       "%s: link up, %sMbps, %s-duplex\n", | 
 | 				       dev->name, | 
 | 				       (ecmd.speed == SPEED_100) ? "100" : "10", | 
 | 				       (ecmd.duplex == | 
 | 					DUPLEX_FULL) ? "full" : "half"); | 
 | 			} | 
 | 			bcr9 = lp->a.read_bcr(dev->base_addr, 9); | 
 | 			if ((bcr9 & (1 << 0)) != lp->mii_if.full_duplex) { | 
 | 				if (lp->mii_if.full_duplex) | 
 | 					bcr9 |= (1 << 0); | 
 | 				else | 
 | 					bcr9 &= ~(1 << 0); | 
 | 				lp->a.write_bcr(dev->base_addr, 9, bcr9); | 
 | 			} | 
 | 		} else { | 
 | 			if (netif_msg_link(lp)) | 
 | 				printk(KERN_INFO "%s: link up\n", dev->name); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Check for loss of link and link establishment. | 
 |  * Can not use mii_check_media because it does nothing if mode is forced. | 
 |  */ | 
 |  | 
 | static void pcnet32_watchdog(struct net_device *dev) | 
 | { | 
 | 	struct pcnet32_private *lp = dev->priv; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Print the link status if it has changed */ | 
 | 	spin_lock_irqsave(&lp->lock, flags); | 
 | 	pcnet32_check_media(dev, 0); | 
 | 	spin_unlock_irqrestore(&lp->lock, flags); | 
 |  | 
 | 	mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); | 
 | } | 
 |  | 
 | static void __devexit pcnet32_remove_one(struct pci_dev *pdev) | 
 | { | 
 | 	struct net_device *dev = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (dev) { | 
 | 		struct pcnet32_private *lp = dev->priv; | 
 |  | 
 | 		unregister_netdev(dev); | 
 | 		pcnet32_free_ring(dev); | 
 | 		release_region(dev->base_addr, PCNET32_TOTAL_SIZE); | 
 | 		pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); | 
 | 		free_netdev(dev); | 
 | 		pci_disable_device(pdev); | 
 | 		pci_set_drvdata(pdev, NULL); | 
 | 	} | 
 | } | 
 |  | 
 | static struct pci_driver pcnet32_driver = { | 
 | 	.name = DRV_NAME, | 
 | 	.probe = pcnet32_probe_pci, | 
 | 	.remove = __devexit_p(pcnet32_remove_one), | 
 | 	.id_table = pcnet32_pci_tbl, | 
 | }; | 
 |  | 
 | /* An additional parameter that may be passed in... */ | 
 | static int debug = -1; | 
 | static int tx_start_pt = -1; | 
 | static int pcnet32_have_pci; | 
 |  | 
 | module_param(debug, int, 0); | 
 | MODULE_PARM_DESC(debug, DRV_NAME " debug level"); | 
 | module_param(max_interrupt_work, int, 0); | 
 | MODULE_PARM_DESC(max_interrupt_work, | 
 | 		 DRV_NAME " maximum events handled per interrupt"); | 
 | module_param(rx_copybreak, int, 0); | 
 | MODULE_PARM_DESC(rx_copybreak, | 
 | 		 DRV_NAME " copy breakpoint for copy-only-tiny-frames"); | 
 | module_param(tx_start_pt, int, 0); | 
 | MODULE_PARM_DESC(tx_start_pt, DRV_NAME " transmit start point (0-3)"); | 
 | module_param(pcnet32vlb, int, 0); | 
 | MODULE_PARM_DESC(pcnet32vlb, DRV_NAME " Vesa local bus (VLB) support (0/1)"); | 
 | module_param_array(options, int, NULL, 0); | 
 | MODULE_PARM_DESC(options, DRV_NAME " initial option setting(s) (0-15)"); | 
 | module_param_array(full_duplex, int, NULL, 0); | 
 | MODULE_PARM_DESC(full_duplex, DRV_NAME " full duplex setting(s) (1)"); | 
 | /* Module Parameter for HomePNA cards added by Patrick Simmons, 2004 */ | 
 | module_param_array(homepna, int, NULL, 0); | 
 | MODULE_PARM_DESC(homepna, | 
 | 		 DRV_NAME | 
 | 		 " mode for 79C978 cards (1 for HomePNA, 0 for Ethernet, default Ethernet"); | 
 |  | 
 | MODULE_AUTHOR("Thomas Bogendoerfer"); | 
 | MODULE_DESCRIPTION("Driver for PCnet32 and PCnetPCI based ethercards"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | #define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) | 
 |  | 
 | static int __init pcnet32_init_module(void) | 
 | { | 
 | 	printk(KERN_INFO "%s", version); | 
 |  | 
 | 	pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT); | 
 |  | 
 | 	if ((tx_start_pt >= 0) && (tx_start_pt <= 3)) | 
 | 		tx_start = tx_start_pt; | 
 |  | 
 | 	/* find the PCI devices */ | 
 | 	if (!pci_module_init(&pcnet32_driver)) | 
 | 		pcnet32_have_pci = 1; | 
 |  | 
 | 	/* should we find any remaining VLbus devices ? */ | 
 | 	if (pcnet32vlb) | 
 | 		pcnet32_probe_vlbus(); | 
 |  | 
 | 	if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE)) | 
 | 		printk(KERN_INFO PFX "%d cards_found.\n", cards_found); | 
 |  | 
 | 	return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV; | 
 | } | 
 |  | 
 | static void __exit pcnet32_cleanup_module(void) | 
 | { | 
 | 	struct net_device *next_dev; | 
 |  | 
 | 	while (pcnet32_dev) { | 
 | 		struct pcnet32_private *lp = pcnet32_dev->priv; | 
 | 		next_dev = lp->next; | 
 | 		unregister_netdev(pcnet32_dev); | 
 | 		pcnet32_free_ring(pcnet32_dev); | 
 | 		release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); | 
 | 		pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); | 
 | 		free_netdev(pcnet32_dev); | 
 | 		pcnet32_dev = next_dev; | 
 | 	} | 
 |  | 
 | 	if (pcnet32_have_pci) | 
 | 		pci_unregister_driver(&pcnet32_driver); | 
 | } | 
 |  | 
 | module_init(pcnet32_init_module); | 
 | module_exit(pcnet32_cleanup_module); | 
 |  | 
 | /* | 
 |  * Local variables: | 
 |  *  c-indent-level: 4 | 
 |  *  tab-width: 8 | 
 |  * End: | 
 |  */ |