iwlwifi: use #define instead of hard coded value
Instead of hard coded value, use the define in iwl-commands.h for
better code maintenance
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 112bfa5..597d955 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -960,10 +960,10 @@
if (iwl_is_monitor_mode(priv) &&
!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
- rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
}
priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd8766b..065214b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -580,9 +580,10 @@
int ret = 0;
u32 rate_flags = 0;
u16 cmd_len;
+ u16 rx_chain = 0;
enum ieee80211_band band;
u8 n_probes = 0;
- u8 rx_chain = priv->hw_params.valid_rx_ant;
+ u8 rx_ant = priv->hw_params.valid_rx_ant;
u8 rate;
bool is_active = false;
@@ -723,7 +724,7 @@
* Avoid A (0x1) because of its off-channel reception on A-band.
*/
if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
- rx_chain = 0x6;
+ rx_ant = ANT_BC;
} else {
IWL_WARN(priv, "Invalid scan band count\n");
goto done;
@@ -735,10 +736,11 @@
scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
/* MIMO is not used here, but value is required */
- scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
- cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
- (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
- (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
+ rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
cmd_len = iwl_fill_probe_req(priv,
(struct ieee80211_mgmt *)scan->data,
priv->scan_request->ie,