| Herbert Valerio Riedel | 7e56a7d | 2006-07-14 00:24:11 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * Intersil ISL1208 rtc class driver | 
|  | 3 | * | 
|  | 4 | * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org> | 
|  | 5 | * | 
|  | 6 | *  This program is free software; you can redistribute  it and/or modify it | 
|  | 7 | *  under  the terms of  the GNU General  Public License as published by the | 
|  | 8 | *  Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | 9 | *  option) any later version. | 
|  | 10 | * | 
|  | 11 | */ | 
|  | 12 |  | 
|  | 13 | #include <linux/module.h> | 
|  | 14 | #include <linux/i2c.h> | 
|  | 15 | #include <linux/bcd.h> | 
|  | 16 | #include <linux/rtc.h> | 
|  | 17 |  | 
|  | 18 | #define DRV_NAME "isl1208" | 
|  | 19 | #define DRV_VERSION "0.2" | 
|  | 20 |  | 
|  | 21 | /* Register map */ | 
|  | 22 | /* rtc section */ | 
|  | 23 | #define ISL1208_REG_SC  0x00 | 
|  | 24 | #define ISL1208_REG_MN  0x01 | 
|  | 25 | #define ISL1208_REG_HR  0x02 | 
|  | 26 | #define ISL1208_REG_HR_MIL     (1<<7) /* 24h/12h mode */ | 
|  | 27 | #define ISL1208_REG_HR_PM      (1<<5) /* PM/AM bit in 12h mode */ | 
|  | 28 | #define ISL1208_REG_DT  0x03 | 
|  | 29 | #define ISL1208_REG_MO  0x04 | 
|  | 30 | #define ISL1208_REG_YR  0x05 | 
|  | 31 | #define ISL1208_REG_DW  0x06 | 
|  | 32 | #define ISL1208_RTC_SECTION_LEN 7 | 
|  | 33 |  | 
|  | 34 | /* control/status section */ | 
|  | 35 | #define ISL1208_REG_SR  0x07 | 
|  | 36 | #define ISL1208_REG_SR_ARST    (1<<7) /* auto reset */ | 
|  | 37 | #define ISL1208_REG_SR_XTOSCB  (1<<6) /* crystal oscillator */ | 
|  | 38 | #define ISL1208_REG_SR_WRTC    (1<<4) /* write rtc */ | 
|  | 39 | #define ISL1208_REG_SR_ALM     (1<<2) /* alarm */ | 
|  | 40 | #define ISL1208_REG_SR_BAT     (1<<1) /* battery */ | 
|  | 41 | #define ISL1208_REG_SR_RTCF    (1<<0) /* rtc fail */ | 
|  | 42 | #define ISL1208_REG_INT 0x08 | 
|  | 43 | #define ISL1208_REG_09  0x09 /* reserved */ | 
|  | 44 | #define ISL1208_REG_ATR 0x0a | 
|  | 45 | #define ISL1208_REG_DTR 0x0b | 
|  | 46 |  | 
|  | 47 | /* alarm section */ | 
|  | 48 | #define ISL1208_REG_SCA 0x0c | 
|  | 49 | #define ISL1208_REG_MNA 0x0d | 
|  | 50 | #define ISL1208_REG_HRA 0x0e | 
|  | 51 | #define ISL1208_REG_DTA 0x0f | 
|  | 52 | #define ISL1208_REG_MOA 0x10 | 
|  | 53 | #define ISL1208_REG_DWA 0x11 | 
|  | 54 | #define ISL1208_ALARM_SECTION_LEN 6 | 
|  | 55 |  | 
|  | 56 | /* user section */ | 
|  | 57 | #define ISL1208_REG_USR1 0x12 | 
|  | 58 | #define ISL1208_REG_USR2 0x13 | 
|  | 59 | #define ISL1208_USR_SECTION_LEN 2 | 
|  | 60 |  | 
|  | 61 | /* i2c configuration */ | 
|  | 62 | #define ISL1208_I2C_ADDR 0xde | 
|  | 63 |  | 
|  | 64 | static unsigned short normal_i2c[] = { | 
|  | 65 | ISL1208_I2C_ADDR>>1, I2C_CLIENT_END | 
|  | 66 | }; | 
|  | 67 | I2C_CLIENT_INSMOD; /* defines addr_data */ | 
|  | 68 |  | 
|  | 69 | static int isl1208_attach_adapter(struct i2c_adapter *adapter); | 
|  | 70 | static int isl1208_detach_client(struct i2c_client *client); | 
|  | 71 |  | 
|  | 72 | static struct i2c_driver isl1208_driver = { | 
|  | 73 | .driver		= { | 
|  | 74 | .name	= DRV_NAME, | 
|  | 75 | }, | 
|  | 76 | .id		= I2C_DRIVERID_ISL1208, | 
|  | 77 | .attach_adapter = &isl1208_attach_adapter, | 
|  | 78 | .detach_client	= &isl1208_detach_client, | 
|  | 79 | }; | 
|  | 80 |  | 
|  | 81 | /* block read */ | 
|  | 82 | static int | 
|  | 83 | isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[], | 
|  | 84 | unsigned len) | 
|  | 85 | { | 
|  | 86 | u8 reg_addr[1] = { reg }; | 
|  | 87 | struct i2c_msg msgs[2] = { | 
|  | 88 | { client->addr, client->flags, sizeof(reg_addr), reg_addr }, | 
|  | 89 | { client->addr, client->flags | I2C_M_RD, len, buf } | 
|  | 90 | }; | 
|  | 91 | int ret; | 
|  | 92 |  | 
|  | 93 | BUG_ON(len == 0); | 
|  | 94 | BUG_ON(reg > ISL1208_REG_USR2); | 
|  | 95 | BUG_ON(reg + len > ISL1208_REG_USR2 + 1); | 
|  | 96 |  | 
|  | 97 | ret = i2c_transfer(client->adapter, msgs, 2); | 
|  | 98 | if (ret > 0) | 
|  | 99 | ret = 0; | 
|  | 100 | return ret; | 
|  | 101 | } | 
|  | 102 |  | 
|  | 103 | /* block write */ | 
|  | 104 | static int | 
|  | 105 | isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[], | 
|  | 106 | unsigned len) | 
|  | 107 | { | 
|  | 108 | u8 i2c_buf[ISL1208_REG_USR2 + 2]; | 
|  | 109 | struct i2c_msg msgs[1] = { | 
|  | 110 | { client->addr, client->flags, len + 1, i2c_buf } | 
|  | 111 | }; | 
|  | 112 | int ret; | 
|  | 113 |  | 
|  | 114 | BUG_ON(len == 0); | 
|  | 115 | BUG_ON(reg > ISL1208_REG_USR2); | 
|  | 116 | BUG_ON(reg + len > ISL1208_REG_USR2 + 1); | 
|  | 117 |  | 
|  | 118 | i2c_buf[0] = reg; | 
|  | 119 | memcpy(&i2c_buf[1], &buf[0], len); | 
|  | 120 |  | 
|  | 121 | ret = i2c_transfer(client->adapter, msgs, 1); | 
|  | 122 | if (ret > 0) | 
|  | 123 | ret = 0; | 
|  | 124 | return ret; | 
|  | 125 | } | 
|  | 126 |  | 
|  | 127 | /* simple check to see wether we have a isl1208 */ | 
|  | 128 | static int isl1208_i2c_validate_client(struct i2c_client *client) | 
|  | 129 | { | 
|  | 130 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; | 
|  | 131 | u8 zero_mask[ISL1208_RTC_SECTION_LEN] = { | 
|  | 132 | 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8 | 
|  | 133 | }; | 
|  | 134 | int i; | 
|  | 135 | int ret; | 
|  | 136 |  | 
|  | 137 | ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); | 
|  | 138 | if (ret < 0) | 
|  | 139 | return ret; | 
|  | 140 |  | 
|  | 141 | for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) { | 
|  | 142 | if (regs[i] & zero_mask[i]) /* check if bits are cleared */ | 
|  | 143 | return -ENODEV; | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | return 0; | 
|  | 147 | } | 
|  | 148 |  | 
|  | 149 | static int isl1208_i2c_get_sr(struct i2c_client *client) | 
|  | 150 | { | 
|  | 151 | return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0; | 
|  | 152 | } | 
|  | 153 |  | 
|  | 154 | static int isl1208_i2c_get_atr(struct i2c_client *client) | 
|  | 155 | { | 
|  | 156 | int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR); | 
|  | 157 |  | 
|  | 158 | if (atr < 0) | 
|  | 159 | return -EIO; | 
|  | 160 |  | 
|  | 161 | /* The 6bit value in the ATR register controls the load | 
|  | 162 | * capacitance C_load * in steps of 0.25pF | 
|  | 163 | * | 
|  | 164 | * bit (1<<5) of the ATR register is inverted | 
|  | 165 | * | 
|  | 166 | * C_load(ATR=0x20) =  4.50pF | 
|  | 167 | * C_load(ATR=0x00) = 12.50pF | 
|  | 168 | * C_load(ATR=0x1f) = 20.25pF | 
|  | 169 | * | 
|  | 170 | */ | 
|  | 171 |  | 
|  | 172 | atr &= 0x3f; /* mask out lsb */ | 
|  | 173 | atr ^= 1<<5; /* invert 6th bit */ | 
|  | 174 | atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */ | 
|  | 175 |  | 
|  | 176 | return atr; | 
|  | 177 | } | 
|  | 178 |  | 
|  | 179 | static int isl1208_i2c_get_dtr(struct i2c_client *client) | 
|  | 180 | { | 
|  | 181 | int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR); | 
|  | 182 |  | 
|  | 183 | if (dtr < 0) | 
|  | 184 | return -EIO; | 
|  | 185 |  | 
|  | 186 | /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */ | 
|  | 187 | dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1); | 
|  | 188 |  | 
|  | 189 | return dtr; | 
|  | 190 | } | 
|  | 191 |  | 
|  | 192 | static int isl1208_i2c_get_usr(struct i2c_client *client) | 
|  | 193 | { | 
|  | 194 | u8 buf[ISL1208_USR_SECTION_LEN] = { 0, }; | 
|  | 195 | int ret; | 
|  | 196 |  | 
|  | 197 | ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf, | 
|  | 198 | ISL1208_USR_SECTION_LEN); | 
|  | 199 | if (ret < 0) | 
|  | 200 | return ret; | 
|  | 201 |  | 
|  | 202 | return (buf[1] << 8) | buf[0]; | 
|  | 203 | } | 
|  | 204 |  | 
|  | 205 | static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr) | 
|  | 206 | { | 
|  | 207 | u8 buf[ISL1208_USR_SECTION_LEN]; | 
|  | 208 |  | 
|  | 209 | buf[0] = usr & 0xff; | 
|  | 210 | buf[1] = (usr >> 8) & 0xff; | 
|  | 211 |  | 
|  | 212 | return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf, | 
|  | 213 | ISL1208_USR_SECTION_LEN); | 
|  | 214 | } | 
|  | 215 |  | 
|  | 216 | static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq) | 
|  | 217 | { | 
|  | 218 | struct i2c_client *const client = to_i2c_client(dev); | 
|  | 219 | int sr, dtr, atr, usr; | 
|  | 220 |  | 
|  | 221 | sr = isl1208_i2c_get_sr(client); | 
|  | 222 | if (sr < 0) { | 
|  | 223 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); | 
|  | 224 | return sr; | 
|  | 225 | } | 
|  | 226 |  | 
|  | 227 | seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n", | 
|  | 228 | (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "", | 
|  | 229 | (sr & ISL1208_REG_SR_BAT) ? " BAT" : "", | 
|  | 230 | (sr & ISL1208_REG_SR_ALM) ? " ALM" : "", | 
|  | 231 | (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "", | 
|  | 232 | (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "", | 
|  | 233 | (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", | 
|  | 234 | sr); | 
|  | 235 |  | 
|  | 236 | seq_printf(seq, "batt_status\t: %s\n", | 
|  | 237 | (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay"); | 
|  | 238 |  | 
|  | 239 | dtr = isl1208_i2c_get_dtr(client); | 
|  | 240 | if (dtr >= 0 -1) | 
|  | 241 | seq_printf(seq, "digital_trim\t: %d ppm\n", dtr); | 
|  | 242 |  | 
|  | 243 | atr = isl1208_i2c_get_atr(client); | 
|  | 244 | if (atr >= 0) | 
|  | 245 | seq_printf(seq, "analog_trim\t: %d.%.2d pF\n", | 
|  | 246 | atr>>2, (atr&0x3)*25); | 
|  | 247 |  | 
|  | 248 | usr = isl1208_i2c_get_usr(client); | 
|  | 249 | if (usr >= 0) | 
|  | 250 | seq_printf(seq, "user_data\t: 0x%.4x\n", usr); | 
|  | 251 |  | 
|  | 252 | return 0; | 
|  | 253 | } | 
|  | 254 |  | 
|  | 255 |  | 
|  | 256 | static int isl1208_i2c_read_time(struct i2c_client *client, | 
|  | 257 | struct rtc_time *tm) | 
|  | 258 | { | 
|  | 259 | int sr; | 
|  | 260 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; | 
|  | 261 |  | 
|  | 262 | sr = isl1208_i2c_get_sr(client); | 
|  | 263 | if (sr < 0) { | 
|  | 264 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); | 
|  | 265 | return -EIO; | 
|  | 266 | } | 
|  | 267 |  | 
|  | 268 | sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); | 
|  | 269 | if (sr < 0) { | 
|  | 270 | dev_err(&client->dev, "%s: reading RTC section failed\n", | 
|  | 271 | __func__); | 
|  | 272 | return sr; | 
|  | 273 | } | 
|  | 274 |  | 
|  | 275 | tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]); | 
|  | 276 | tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]); | 
|  | 277 | { /* HR field has a more complex interpretation */ | 
|  | 278 | const u8 _hr = regs[ISL1208_REG_HR]; | 
|  | 279 | if (_hr & ISL1208_REG_HR_MIL) /* 24h format */ | 
|  | 280 | tm->tm_hour = BCD2BIN(_hr & 0x3f); | 
|  | 281 | else { // 12h format | 
|  | 282 | tm->tm_hour = BCD2BIN(_hr & 0x1f); | 
|  | 283 | if (_hr & ISL1208_REG_HR_PM) /* PM flag set */ | 
|  | 284 | tm->tm_hour += 12; | 
|  | 285 | } | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 | tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]); | 
|  | 289 | tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */ | 
|  | 290 | tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100; | 
|  | 291 | tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]); | 
|  | 292 |  | 
|  | 293 | return 0; | 
|  | 294 | } | 
|  | 295 |  | 
|  | 296 | static int isl1208_i2c_read_alarm(struct i2c_client *client, | 
|  | 297 | struct rtc_wkalrm *alarm) | 
|  | 298 | { | 
|  | 299 | struct rtc_time *const tm = &alarm->time; | 
|  | 300 | u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, }; | 
|  | 301 | int sr; | 
|  | 302 |  | 
|  | 303 | sr = isl1208_i2c_get_sr(client); | 
|  | 304 | if (sr < 0) { | 
|  | 305 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); | 
|  | 306 | return sr; | 
|  | 307 | } | 
|  | 308 |  | 
|  | 309 | sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs, | 
|  | 310 | ISL1208_ALARM_SECTION_LEN); | 
|  | 311 | if (sr < 0) { | 
|  | 312 | dev_err(&client->dev, "%s: reading alarm section failed\n", | 
|  | 313 | __func__); | 
|  | 314 | return sr; | 
|  | 315 | } | 
|  | 316 |  | 
|  | 317 | /* MSB of each alarm register is an enable bit */ | 
|  | 318 | tm->tm_sec  = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f); | 
|  | 319 | tm->tm_min  = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f); | 
|  | 320 | tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f); | 
|  | 321 | tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f); | 
|  | 322 | tm->tm_mon  = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1; | 
|  | 323 | tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03); | 
|  | 324 |  | 
|  | 325 | return 0; | 
|  | 326 | } | 
|  | 327 |  | 
|  | 328 | static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | 329 | { | 
|  | 330 | return isl1208_i2c_read_time(to_i2c_client(dev), tm); | 
|  | 331 | } | 
|  | 332 |  | 
|  | 333 | static int isl1208_i2c_set_time(struct i2c_client *client, | 
|  | 334 | struct rtc_time const *tm) | 
|  | 335 | { | 
|  | 336 | int sr; | 
|  | 337 | u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; | 
|  | 338 |  | 
|  | 339 | regs[ISL1208_REG_SC] = BIN2BCD(tm->tm_sec); | 
|  | 340 | regs[ISL1208_REG_MN] = BIN2BCD(tm->tm_min); | 
|  | 341 | regs[ISL1208_REG_HR] = BIN2BCD(tm->tm_hour) | ISL1208_REG_HR_MIL; | 
|  | 342 |  | 
|  | 343 | regs[ISL1208_REG_DT] = BIN2BCD(tm->tm_mday); | 
|  | 344 | regs[ISL1208_REG_MO] = BIN2BCD(tm->tm_mon + 1); | 
|  | 345 | regs[ISL1208_REG_YR] = BIN2BCD(tm->tm_year - 100); | 
|  | 346 |  | 
|  | 347 | regs[ISL1208_REG_DW] = BIN2BCD(tm->tm_wday & 7); | 
|  | 348 |  | 
|  | 349 | sr = isl1208_i2c_get_sr(client); | 
|  | 350 | if (sr < 0) { | 
|  | 351 | dev_err(&client->dev, "%s: reading SR failed\n", __func__); | 
|  | 352 | return sr; | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | /* set WRTC */ | 
|  | 356 | sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR, | 
|  | 357 | sr | ISL1208_REG_SR_WRTC); | 
|  | 358 | if (sr < 0) { | 
|  | 359 | dev_err(&client->dev, "%s: writing SR failed\n", __func__); | 
|  | 360 | return sr; | 
|  | 361 | } | 
|  | 362 |  | 
|  | 363 | /* write RTC registers */ | 
|  | 364 | sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN); | 
|  | 365 | if (sr < 0) { | 
|  | 366 | dev_err(&client->dev, "%s: writing RTC section failed\n", | 
|  | 367 | __func__); | 
|  | 368 | return sr; | 
|  | 369 | } | 
|  | 370 |  | 
|  | 371 | /* clear WRTC again */ | 
|  | 372 | sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR, | 
|  | 373 | sr & ~ISL1208_REG_SR_WRTC); | 
|  | 374 | if (sr < 0) { | 
|  | 375 | dev_err(&client->dev, "%s: writing SR failed\n", __func__); | 
|  | 376 | return sr; | 
|  | 377 | } | 
|  | 378 |  | 
|  | 379 | return 0; | 
|  | 380 | } | 
|  | 381 |  | 
|  | 382 |  | 
|  | 383 | static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | 384 | { | 
|  | 385 | return isl1208_i2c_set_time(to_i2c_client(dev), tm); | 
|  | 386 | } | 
|  | 387 |  | 
|  | 388 | static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) | 
|  | 389 | { | 
|  | 390 | return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm); | 
|  | 391 | } | 
|  | 392 |  | 
| David Brownell | ff8371a | 2006-09-30 23:28:17 -0700 | [diff] [blame] | 393 | static const struct rtc_class_ops isl1208_rtc_ops = { | 
| Herbert Valerio Riedel | 7e56a7d | 2006-07-14 00:24:11 -0700 | [diff] [blame] | 394 | .proc		= isl1208_rtc_proc, | 
|  | 395 | .read_time	= isl1208_rtc_read_time, | 
|  | 396 | .set_time	= isl1208_rtc_set_time, | 
|  | 397 | .read_alarm	= isl1208_rtc_read_alarm, | 
|  | 398 | //.set_alarm	= isl1208_rtc_set_alarm, | 
|  | 399 | }; | 
|  | 400 |  | 
|  | 401 | /* sysfs interface */ | 
|  | 402 |  | 
|  | 403 | static ssize_t isl1208_sysfs_show_atrim(struct device *dev, | 
|  | 404 | struct device_attribute *attr, | 
|  | 405 | char *buf) | 
|  | 406 | { | 
|  | 407 | int atr; | 
|  | 408 |  | 
|  | 409 | atr = isl1208_i2c_get_atr(to_i2c_client(dev)); | 
|  | 410 | if (atr < 0) | 
|  | 411 | return atr; | 
|  | 412 |  | 
|  | 413 | return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25); | 
|  | 414 | } | 
|  | 415 | static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL); | 
|  | 416 |  | 
|  | 417 | static ssize_t isl1208_sysfs_show_dtrim(struct device *dev, | 
|  | 418 | struct device_attribute *attr, | 
|  | 419 | char *buf) | 
|  | 420 | { | 
|  | 421 | int dtr; | 
|  | 422 |  | 
|  | 423 | dtr = isl1208_i2c_get_dtr(to_i2c_client(dev)); | 
|  | 424 | if (dtr < 0) | 
|  | 425 | return dtr; | 
|  | 426 |  | 
|  | 427 | return sprintf(buf, "%d ppm\n", dtr); | 
|  | 428 | } | 
|  | 429 | static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL); | 
|  | 430 |  | 
|  | 431 | static ssize_t isl1208_sysfs_show_usr(struct device *dev, | 
|  | 432 | struct device_attribute *attr, | 
|  | 433 | char *buf) | 
|  | 434 | { | 
|  | 435 | int usr; | 
|  | 436 |  | 
|  | 437 | usr = isl1208_i2c_get_usr(to_i2c_client(dev)); | 
|  | 438 | if (usr < 0) | 
|  | 439 | return usr; | 
|  | 440 |  | 
|  | 441 | return sprintf(buf, "0x%.4x\n", usr); | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | static ssize_t isl1208_sysfs_store_usr(struct device *dev, | 
|  | 445 | struct device_attribute *attr, | 
|  | 446 | const char *buf, size_t count) | 
|  | 447 | { | 
|  | 448 | int usr = -1; | 
|  | 449 |  | 
|  | 450 | if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) { | 
|  | 451 | if (sscanf(buf, "%x", &usr) != 1) | 
|  | 452 | return -EINVAL; | 
|  | 453 | } else { | 
|  | 454 | if (sscanf(buf, "%d", &usr) != 1) | 
|  | 455 | return -EINVAL; | 
|  | 456 | } | 
|  | 457 |  | 
|  | 458 | if (usr < 0 || usr > 0xffff) | 
|  | 459 | return -EINVAL; | 
|  | 460 |  | 
|  | 461 | return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count; | 
|  | 462 | } | 
|  | 463 | static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr, | 
|  | 464 | isl1208_sysfs_store_usr); | 
|  | 465 |  | 
|  | 466 | static int | 
|  | 467 | isl1208_probe(struct i2c_adapter *adapter, int addr, int kind) | 
|  | 468 | { | 
|  | 469 | int rc = 0; | 
|  | 470 | struct i2c_client *new_client = NULL; | 
|  | 471 | struct rtc_device *rtc = NULL; | 
|  | 472 |  | 
|  | 473 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { | 
|  | 474 | rc = -ENODEV; | 
|  | 475 | goto failout; | 
|  | 476 | } | 
|  | 477 |  | 
|  | 478 | new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); | 
|  | 479 | if (new_client == NULL) { | 
|  | 480 | rc = -ENOMEM; | 
|  | 481 | goto failout; | 
|  | 482 | } | 
|  | 483 |  | 
|  | 484 | new_client->addr = addr; | 
|  | 485 | new_client->adapter = adapter; | 
|  | 486 | new_client->driver = &isl1208_driver; | 
|  | 487 | new_client->flags = 0; | 
|  | 488 | strcpy(new_client->name, DRV_NAME); | 
|  | 489 |  | 
|  | 490 | if (kind < 0) { | 
|  | 491 | rc = isl1208_i2c_validate_client(new_client); | 
|  | 492 | if (rc < 0) | 
|  | 493 | goto failout; | 
|  | 494 | } | 
|  | 495 |  | 
|  | 496 | rc = i2c_attach_client(new_client); | 
|  | 497 | if (rc < 0) | 
|  | 498 | goto failout; | 
|  | 499 |  | 
|  | 500 | dev_info(&new_client->dev, | 
|  | 501 | "chip found, driver version " DRV_VERSION "\n"); | 
|  | 502 |  | 
|  | 503 | rtc = rtc_device_register(isl1208_driver.driver.name, | 
|  | 504 | &new_client->dev, | 
|  | 505 | &isl1208_rtc_ops, THIS_MODULE); | 
|  | 506 |  | 
|  | 507 | if (IS_ERR(rtc)) { | 
|  | 508 | rc = PTR_ERR(rtc); | 
|  | 509 | goto failout_detach; | 
|  | 510 | } | 
|  | 511 |  | 
|  | 512 | i2c_set_clientdata(new_client, rtc); | 
|  | 513 |  | 
|  | 514 | rc = isl1208_i2c_get_sr(new_client); | 
|  | 515 | if (rc < 0) { | 
|  | 516 | dev_err(&new_client->dev, "reading status failed\n"); | 
|  | 517 | goto failout_unregister; | 
|  | 518 | } | 
|  | 519 |  | 
|  | 520 | if (rc & ISL1208_REG_SR_RTCF) | 
|  | 521 | dev_warn(&new_client->dev, "rtc power failure detected, " | 
|  | 522 | "please set clock.\n"); | 
|  | 523 |  | 
|  | 524 | rc = device_create_file(&new_client->dev, &dev_attr_atrim); | 
|  | 525 | if (rc < 0) | 
|  | 526 | goto failout_unregister; | 
|  | 527 | rc = device_create_file(&new_client->dev, &dev_attr_dtrim); | 
|  | 528 | if (rc < 0) | 
|  | 529 | goto failout_atrim; | 
|  | 530 | rc = device_create_file(&new_client->dev, &dev_attr_usr); | 
|  | 531 | if (rc < 0) | 
|  | 532 | goto failout_dtrim; | 
|  | 533 |  | 
|  | 534 | return 0; | 
|  | 535 |  | 
|  | 536 | failout_dtrim: | 
|  | 537 | device_remove_file(&new_client->dev, &dev_attr_dtrim); | 
|  | 538 | failout_atrim: | 
|  | 539 | device_remove_file(&new_client->dev, &dev_attr_atrim); | 
|  | 540 | failout_unregister: | 
|  | 541 | rtc_device_unregister(rtc); | 
|  | 542 | failout_detach: | 
|  | 543 | i2c_detach_client(new_client); | 
|  | 544 | failout: | 
|  | 545 | kfree(new_client); | 
|  | 546 | return rc; | 
|  | 547 | } | 
|  | 548 |  | 
|  | 549 | static int | 
|  | 550 | isl1208_attach_adapter (struct i2c_adapter *adapter) | 
|  | 551 | { | 
|  | 552 | return i2c_probe(adapter, &addr_data, isl1208_probe); | 
|  | 553 | } | 
|  | 554 |  | 
|  | 555 | static int | 
|  | 556 | isl1208_detach_client(struct i2c_client *client) | 
|  | 557 | { | 
|  | 558 | int rc; | 
|  | 559 | struct rtc_device *const rtc = i2c_get_clientdata(client); | 
|  | 560 |  | 
|  | 561 | if (rtc) | 
|  | 562 | rtc_device_unregister(rtc); /* do we need to kfree? */ | 
|  | 563 |  | 
|  | 564 | rc = i2c_detach_client(client); | 
|  | 565 | if (rc) | 
|  | 566 | return rc; | 
|  | 567 |  | 
|  | 568 | kfree(client); | 
|  | 569 |  | 
|  | 570 | return 0; | 
|  | 571 | } | 
|  | 572 |  | 
|  | 573 | /* module management */ | 
|  | 574 |  | 
|  | 575 | static int __init isl1208_init(void) | 
|  | 576 | { | 
|  | 577 | return i2c_add_driver(&isl1208_driver); | 
|  | 578 | } | 
|  | 579 |  | 
|  | 580 | static void __exit isl1208_exit(void) | 
|  | 581 | { | 
|  | 582 | i2c_del_driver(&isl1208_driver); | 
|  | 583 | } | 
|  | 584 |  | 
|  | 585 | MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>"); | 
|  | 586 | MODULE_DESCRIPTION("Intersil ISL1208 RTC driver"); | 
|  | 587 | MODULE_LICENSE("GPL"); | 
|  | 588 | MODULE_VERSION(DRV_VERSION); | 
|  | 589 |  | 
|  | 590 | module_init(isl1208_init); | 
|  | 591 | module_exit(isl1208_exit); |