| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | #ifndef __LINUX_PARPORT_PC_H | 
|  | 2 | #define __LINUX_PARPORT_PC_H | 
|  | 3 |  | 
|  | 4 | #include <asm/io.h> | 
|  | 5 |  | 
|  | 6 | /* --- register definitions ------------------------------- */ | 
|  | 7 |  | 
|  | 8 | #define ECONTROL(p) ((p)->base_hi + 0x2) | 
|  | 9 | #define CONFIGB(p)  ((p)->base_hi + 0x1) | 
|  | 10 | #define CONFIGA(p)  ((p)->base_hi + 0x0) | 
|  | 11 | #define FIFO(p)     ((p)->base_hi + 0x0) | 
|  | 12 | #define EPPDATA(p)  ((p)->base    + 0x4) | 
|  | 13 | #define EPPADDR(p)  ((p)->base    + 0x3) | 
|  | 14 | #define CONTROL(p)  ((p)->base    + 0x2) | 
|  | 15 | #define STATUS(p)   ((p)->base    + 0x1) | 
|  | 16 | #define DATA(p)     ((p)->base    + 0x0) | 
|  | 17 |  | 
|  | 18 | struct parport_pc_private { | 
|  | 19 | /* Contents of CTR. */ | 
|  | 20 | unsigned char ctr; | 
|  | 21 |  | 
|  | 22 | /* Bitmask of writable CTR bits. */ | 
|  | 23 | unsigned char ctr_writable; | 
|  | 24 |  | 
|  | 25 | /* Whether or not there's an ECR. */ | 
|  | 26 | int ecr; | 
|  | 27 |  | 
|  | 28 | /* Number of PWords that FIFO will hold. */ | 
|  | 29 | int fifo_depth; | 
|  | 30 |  | 
|  | 31 | /* Number of bytes per portword. */ | 
|  | 32 | int pword; | 
|  | 33 |  | 
|  | 34 | /* Not used yet. */ | 
|  | 35 | int readIntrThreshold; | 
|  | 36 | int writeIntrThreshold; | 
|  | 37 |  | 
|  | 38 | /* buffer suitable for DMA, if DMA enabled */ | 
|  | 39 | char *dma_buf; | 
|  | 40 | dma_addr_t dma_handle; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 41 | struct list_head list; | 
|  | 42 | struct parport *port; | 
|  | 43 | }; | 
|  | 44 |  | 
|  | 45 | struct parport_pc_via_data | 
|  | 46 | { | 
|  | 47 | /* ISA PnP IRQ routing register 1 */ | 
|  | 48 | u8 via_pci_parport_irq_reg; | 
|  | 49 | /* ISA PnP DMA request routing register */ | 
|  | 50 | u8 via_pci_parport_dma_reg; | 
|  | 51 | /* Register and value to enable SuperIO configuration access */ | 
|  | 52 | u8 via_pci_superio_config_reg; | 
|  | 53 | u8 via_pci_superio_config_data; | 
|  | 54 | /* SuperIO function register number */ | 
|  | 55 | u8 viacfg_function; | 
|  | 56 | /* parallel port control register number */ | 
|  | 57 | u8 viacfg_parport_control; | 
|  | 58 | /* Parallel port base address register */ | 
|  | 59 | u8 viacfg_parport_base; | 
|  | 60 | }; | 
|  | 61 |  | 
|  | 62 | static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d) | 
|  | 63 | { | 
|  | 64 | #ifdef DEBUG_PARPORT | 
|  | 65 | printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d); | 
|  | 66 | #endif | 
|  | 67 | outb(d, DATA(p)); | 
|  | 68 | } | 
|  | 69 |  | 
|  | 70 | static __inline__ unsigned char parport_pc_read_data(struct parport *p) | 
|  | 71 | { | 
|  | 72 | unsigned char val = inb (DATA (p)); | 
|  | 73 | #ifdef DEBUG_PARPORT | 
|  | 74 | printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n", | 
|  | 75 | p, val); | 
|  | 76 | #endif | 
|  | 77 | return val; | 
|  | 78 | } | 
|  | 79 |  | 
|  | 80 | #ifdef DEBUG_PARPORT | 
| Adrian Bunk | 81684ee | 2006-01-06 00:19:53 -0800 | [diff] [blame] | 81 | static inline void dump_parport_state (char *str, struct parport *p) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 82 | { | 
|  | 83 | /* here's hoping that reading these ports won't side-effect anything underneath */ | 
|  | 84 | unsigned char ecr = inb (ECONTROL (p)); | 
|  | 85 | unsigned char dcr = inb (CONTROL (p)); | 
|  | 86 | unsigned char dsr = inb (STATUS (p)); | 
| Marko Kohtala | 110bee7 | 2006-01-06 00:19:49 -0800 | [diff] [blame] | 87 | static const char *const ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"}; | 
| Dave Jones | 6879939 | 2005-12-12 00:37:35 -0800 | [diff] [blame] | 88 | const struct parport_pc_private *priv = p->physport->private_data; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 89 | int i; | 
|  | 90 |  | 
|  | 91 | printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]); | 
|  | 92 | if (ecr & 0x10) printk (",nErrIntrEn"); | 
|  | 93 | if (ecr & 0x08) printk (",dmaEn"); | 
|  | 94 | if (ecr & 0x04) printk (",serviceIntr"); | 
|  | 95 | if (ecr & 0x02) printk (",f_full"); | 
|  | 96 | if (ecr & 0x01) printk (",f_empty"); | 
|  | 97 | for (i=0; i<2; i++) { | 
|  | 98 | printk ("]  dcr(%s)=[", i ? "soft" : "hard"); | 
|  | 99 | dcr = i ? priv->ctr : inb (CONTROL (p)); | 
|  | 100 |  | 
|  | 101 | if (dcr & 0x20) { | 
|  | 102 | printk ("rev"); | 
|  | 103 | } else { | 
|  | 104 | printk ("fwd"); | 
|  | 105 | } | 
|  | 106 | if (dcr & 0x10) printk (",ackIntEn"); | 
|  | 107 | if (!(dcr & 0x08)) printk (",N-SELECT-IN"); | 
|  | 108 | if (dcr & 0x04) printk (",N-INIT"); | 
|  | 109 | if (!(dcr & 0x02)) printk (",N-AUTOFD"); | 
|  | 110 | if (!(dcr & 0x01)) printk (",N-STROBE"); | 
|  | 111 | } | 
|  | 112 | printk ("]  dsr=["); | 
|  | 113 | if (!(dsr & 0x80)) printk ("BUSY"); | 
|  | 114 | if (dsr & 0x40) printk (",N-ACK"); | 
|  | 115 | if (dsr & 0x20) printk (",PERROR"); | 
|  | 116 | if (dsr & 0x10) printk (",SELECT"); | 
|  | 117 | if (dsr & 0x08) printk (",N-FAULT"); | 
|  | 118 | printk ("]\n"); | 
|  | 119 | return; | 
|  | 120 | } | 
|  | 121 | #else	/* !DEBUG_PARPORT */ | 
|  | 122 | #define dump_parport_state(args...) | 
|  | 123 | #endif	/* !DEBUG_PARPORT */ | 
|  | 124 |  | 
|  | 125 | /* __parport_pc_frob_control differs from parport_pc_frob_control in that | 
|  | 126 | * it doesn't do any extra masking. */ | 
|  | 127 | static __inline__ unsigned char __parport_pc_frob_control (struct parport *p, | 
|  | 128 | unsigned char mask, | 
|  | 129 | unsigned char val) | 
|  | 130 | { | 
|  | 131 | struct parport_pc_private *priv = p->physport->private_data; | 
|  | 132 | unsigned char ctr = priv->ctr; | 
|  | 133 | #ifdef DEBUG_PARPORT | 
|  | 134 | printk (KERN_DEBUG | 
|  | 135 | "__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n", | 
|  | 136 | mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); | 
|  | 137 | #endif | 
|  | 138 | ctr = (ctr & ~mask) ^ val; | 
|  | 139 | ctr &= priv->ctr_writable; /* only write writable bits. */ | 
|  | 140 | outb (ctr, CONTROL (p)); | 
|  | 141 | priv->ctr = ctr;	/* Update soft copy */ | 
|  | 142 | return ctr; | 
|  | 143 | } | 
|  | 144 |  | 
|  | 145 | static __inline__ void parport_pc_data_reverse (struct parport *p) | 
|  | 146 | { | 
|  | 147 | __parport_pc_frob_control (p, 0x20, 0x20); | 
|  | 148 | } | 
|  | 149 |  | 
|  | 150 | static __inline__ void parport_pc_data_forward (struct parport *p) | 
|  | 151 | { | 
|  | 152 | __parport_pc_frob_control (p, 0x20, 0x00); | 
|  | 153 | } | 
|  | 154 |  | 
|  | 155 | static __inline__ void parport_pc_write_control (struct parport *p, | 
|  | 156 | unsigned char d) | 
|  | 157 | { | 
|  | 158 | const unsigned char wm = (PARPORT_CONTROL_STROBE | | 
|  | 159 | PARPORT_CONTROL_AUTOFD | | 
|  | 160 | PARPORT_CONTROL_INIT | | 
|  | 161 | PARPORT_CONTROL_SELECT); | 
|  | 162 |  | 
|  | 163 | /* Take this out when drivers have adapted to newer interface. */ | 
|  | 164 | if (d & 0x20) { | 
|  | 165 | printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", | 
|  | 166 | p->name, p->cad->name); | 
|  | 167 | parport_pc_data_reverse (p); | 
|  | 168 | } | 
|  | 169 |  | 
|  | 170 | __parport_pc_frob_control (p, wm, d & wm); | 
|  | 171 | } | 
|  | 172 |  | 
|  | 173 | static __inline__ unsigned char parport_pc_read_control(struct parport *p) | 
|  | 174 | { | 
|  | 175 | const unsigned char rm = (PARPORT_CONTROL_STROBE | | 
|  | 176 | PARPORT_CONTROL_AUTOFD | | 
|  | 177 | PARPORT_CONTROL_INIT | | 
|  | 178 | PARPORT_CONTROL_SELECT); | 
|  | 179 | const struct parport_pc_private *priv = p->physport->private_data; | 
|  | 180 | return priv->ctr & rm; /* Use soft copy */ | 
|  | 181 | } | 
|  | 182 |  | 
|  | 183 | static __inline__ unsigned char parport_pc_frob_control (struct parport *p, | 
|  | 184 | unsigned char mask, | 
|  | 185 | unsigned char val) | 
|  | 186 | { | 
|  | 187 | const unsigned char wm = (PARPORT_CONTROL_STROBE | | 
|  | 188 | PARPORT_CONTROL_AUTOFD | | 
|  | 189 | PARPORT_CONTROL_INIT | | 
|  | 190 | PARPORT_CONTROL_SELECT); | 
|  | 191 |  | 
|  | 192 | /* Take this out when drivers have adapted to newer interface. */ | 
|  | 193 | if (mask & 0x20) { | 
|  | 194 | printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", | 
|  | 195 | p->name, p->cad->name, | 
|  | 196 | (val & 0x20) ? "reverse" : "forward"); | 
|  | 197 | if (val & 0x20) | 
|  | 198 | parport_pc_data_reverse (p); | 
|  | 199 | else | 
|  | 200 | parport_pc_data_forward (p); | 
|  | 201 | } | 
|  | 202 |  | 
|  | 203 | /* Restrict mask and val to control lines. */ | 
|  | 204 | mask &= wm; | 
|  | 205 | val &= wm; | 
|  | 206 |  | 
|  | 207 | return __parport_pc_frob_control (p, mask, val); | 
|  | 208 | } | 
|  | 209 |  | 
|  | 210 | static __inline__ unsigned char parport_pc_read_status(struct parport *p) | 
|  | 211 | { | 
|  | 212 | return inb(STATUS(p)); | 
|  | 213 | } | 
|  | 214 |  | 
|  | 215 |  | 
|  | 216 | static __inline__ void parport_pc_disable_irq(struct parport *p) | 
|  | 217 | { | 
|  | 218 | __parport_pc_frob_control (p, 0x10, 0x00); | 
|  | 219 | } | 
|  | 220 |  | 
|  | 221 | static __inline__ void parport_pc_enable_irq(struct parport *p) | 
|  | 222 | { | 
|  | 223 | __parport_pc_frob_control (p, 0x10, 0x10); | 
|  | 224 | } | 
|  | 225 |  | 
|  | 226 | extern void parport_pc_release_resources(struct parport *p); | 
|  | 227 |  | 
|  | 228 | extern int parport_pc_claim_resources(struct parport *p); | 
|  | 229 |  | 
|  | 230 | /* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */ | 
|  | 231 | extern struct parport *parport_pc_probe_port (unsigned long base, | 
|  | 232 | unsigned long base_hi, | 
|  | 233 | int irq, int dma, | 
| David Brownell | c15a383 | 2007-05-08 00:27:35 -0700 | [diff] [blame] | 234 | struct device *dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 235 | extern void parport_pc_unregister_port (struct parport *p); | 
|  | 236 |  | 
|  | 237 | #endif |