sound/oss/dmasound/dmasound_paula.c

/*
 *  linux/sound/oss/dmasound/dmasound_paula.c
 *
 *  Amiga `Paula' DMA Sound Driver
 *
 *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits
 *  prior to 28/01/2001
 *
 *  28/01/2001 [0.1] Iain Sandoe
 *		     - added versioning
 *		     - put in and populated the hardware_afmts field.
 *             [0.2] - put in SNDCTL_DSP_GETCAPS value.
 *	       [0.3] - put in constraint on state buffer usage.
 *	       [0.4] - put in default hard/soft settings
*/


#include <linux/module.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/soundcard.h>
#include <linux/interrupt.h>

#include <asm/uaccess.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/machdep.h>

#include "dmasound.h"

#define DMASOUND_PAULA_REVISION 0
#define DMASOUND_PAULA_EDITION 4

#define custom amiga_custom
   /*
    *	The minimum period for audio depends on htotal (for OCS/ECS/AGA)
    *	(Imported from arch/m68k/amiga/amisound.c)
    */

extern volatile u_short amiga_audio_min_period;


   /*
    *	amiga_mksound() should be able to restore the period after beeping
    *	(Imported from arch/m68k/amiga/amisound.c)
    */

extern u_short amiga_audio_period;


   /*
    *	Audio DMA masks
    */

#define AMI_AUDIO_OFF	(DMAF_AUD0 | DMAF_AUD1 | DMAF_AUD2 | DMAF_AUD3)
#define AMI_AUDIO_8	(DMAF_SETCLR | DMAF_MASTER | DMAF_AUD0 | DMAF_AUD1)
#define AMI_AUDIO_14	(AMI_AUDIO_8 | DMAF_AUD2 | DMAF_AUD3)


    /*
     *  Helper pointers for 16(14)-bit sound
     */

static int write_sq_block_size_half, write_sq_block_size_quarter;


/*** Low level stuff *********************************************************/


static void *AmiAlloc(unsigned int size, gfp_t flags);
static void AmiFree(void *obj, unsigned int size);
static int AmiIrqInit(void);
#ifdef MODULE
static void AmiIrqCleanUp(void);
#endif
static void AmiSilence(void);
static void AmiInit(void);
static int AmiSetFormat(int format);
static int AmiSetVolume(int volume);
static int AmiSetTreble(int treble);
static void AmiPlayNextFrame(int index);
static void AmiPlay(void);
static irqreturn_t AmiInterrupt(int irq, void *dummy);

#ifdef CONFIG_HEARTBEAT

    /*
     *  Heartbeat interferes with sound since the 7 kHz low-pass filter and the
     *  power LED are controlled by the same line.
     */

static void (*saved_heartbeat)(int) = NULL;

static inline void disable_heartbeat(void)
{
	if (mach_heartbeat) {
	    saved_heartbeat = mach_heartbeat;
	    mach_heartbeat = NULL;
	}
	AmiSetTreble(dmasound.treble);
}

static inline void enable_heartbeat(void)
{
	if (saved_heartbeat)
	    mach_heartbeat = saved_heartbeat;
}
#else /* !CONFIG_HEARTBEAT */
#define disable_heartbeat()	do { } while (0)
#define enable_heartbeat()	do { } while (0)
#endif /* !CONFIG_HEARTBEAT */


/*** Mid level stuff *********************************************************/

static void AmiMixerInit(void);
static int AmiMixerIoctl(u_int cmd, u_long arg);
static int AmiWriteSqSetup(void);
static int AmiStateInfo(char *buffer, size_t space);


/*** Translations ************************************************************/

/* ++TeSche: radically changed for new expanding purposes...
 *
 * These two routines now deal with copying/expanding/translating the samples
 * from user space into our buffer at the right frequency. They take care about
 * how much data there's actually to read, how much buffer space there is and
 * to convert samples into the right frequency/encoding. They will only work on
 * complete samples so it may happen they leave some bytes in the input stream
 * if the user didn't write a multiple of the current sample size. They both
 * return the number of bytes they've used from both streams so you may detect
 * such a situation. Luckily all programs should be able to cope with that.
 *
 * I think I've optimized anything as far as one can do in plain C, all
 * variables should fit in registers and the loops are really short. There's
 * one loop for every possible situation. Writing a more generalized and thus
 * parameterized loop would only produce slower code. Feel free to optimize
 * this in assembler if you like. :)
 *
 * I think these routines belong here because they're not yet really hardware
 * independent, especially the fact that the Falcon can play 16bit samples
 * only in stereo is hardcoded in both of them!
 *
 * ++geert: split in even more functions (one per format)
 */


    /*
     *  Native format
     */

static ssize_t ami_ct_s8(const u_char __user *userPtr, size_t userCount,
			 u_char frame[], ssize_t *frameUsed, ssize_t frameLeft)
{
	ssize_t count, used;

	if (!dmasound.soft.stereo) {
		void *p = &frame[*frameUsed];
		count = min_t(unsigned long, userCount, frameLeft) & ~1;
		used = count;
		if (copy_from_user(p, userPtr, count))
			return -EFAULT;
	} else {
		u_char *left = &frame[*frameUsed>>1];
		u_char *right = left+write_sq_block_size_half;
		count = min_t(unsigned long, userCount, frameLeft)>>1 & ~1;
		used = count*2;
		while (count > 0) {
			if (get_user(*left++, userPtr++)
			    || get_user(*right++, userPtr++))
				return -EFAULT;
			count--;
		}
	}
	*frameUsed += used;
	return used;
}


    /*
     *  Copy and convert 8 bit data
     */

#define GENERATE_AMI_CT8(funcname, convsample)				\
static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\
			u_char frame[], ssize_t *frameUsed,		\
			ssize_t frameLeft)				\
{									\
	ssize_t count, used;						\
									\
	if (!dmasound.soft.stereo) {					\
		u_char *p = &frame[*frameUsed];				\
		count = min_t(size_t, userCount, frameLeft) & ~1;	\
		used = count;						\
		while (count > 0) {					\
			u_char data;					\
			if (get_user(data, userPtr++))			\
				return -EFAULT;				\
			*p++ = convsample(data);			\
			count--;					\
		}							\
	} else {							\
		u_char *left = &frame[*frameUsed>>1];			\
		u_char *right = left+write_sq_block_size_half;		\
		count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\
		used = count*2;						\
		while (count > 0) {					\
			u_char data;					\
			if (get_user(data, userPtr++))			\
				return -EFAULT;				\
			*left++ = convsample(data);			\
			if (get_user(data, userPtr++))			\
				return -EFAULT;				\
			*right++ = convsample(data);			\
			count--;					\
		}							\
	}								\
	*frameUsed += used;						\
	return used;							\
}

#define AMI_CT_ULAW(x)	(dmasound_ulaw2dma8[(x)])
#define AMI_CT_ALAW(x)	(dmasound_alaw2dma8[(x)])
#define AMI_CT_U8(x)	((x) ^ 0x80)

GENERATE_AMI_CT8(ami_ct_ulaw, AMI_CT_ULAW)
GENERATE_AMI_CT8(ami_ct_alaw, AMI_CT_ALAW)
GENERATE_AMI_CT8(ami_ct_u8, AMI_CT_U8)


    /*
     *  Copy and convert 16 bit data
     */

#define GENERATE_AMI_CT_16(funcname, convsample)			\
static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\
			u_char frame[], ssize_t *frameUsed,		\
			ssize_t frameLeft)				\
{									\
	const u_short __user *ptr = (const u_short __user *)userPtr;	\
	ssize_t count, used;						\
	u_short data;							\
									\
	if (!dmasound.soft.stereo) {					\
		u_char *high = &frame[*frameUsed>>1];			\
		u_char *low = high+write_sq_block_size_half;		\
		count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\
		used = count*2;						\
		while (count > 0) {					\
			if (get_user(data, ptr++))			\
				return -EFAULT;				\
			data = convsample(data);			\
			*high++ = data>>8;				\
			*low++ = (data>>2) & 0x3f;			\
			count--;					\
		}							\
	} else {							\
		u_char *lefth = &frame[*frameUsed>>2];			\
		u_char *leftl = lefth+write_sq_block_size_quarter;	\
		u_char *righth = lefth+write_sq_block_size_half;	\
		u_char *rightl = righth+write_sq_block_size_quarter;	\
		count = min_t(size_t, userCount, frameLeft)>>2 & ~1;	\
		used = count*4;						\
		while (count > 0) {					\
			if (get_user(data, ptr++))			\
				return -EFAULT;				\
			data = convsample(data);			\
			*lefth++ = data>>8;				\
			*leftl++ = (data>>2) & 0x3f;			\
			if (get_user(data, ptr++))			\
				return -EFAULT;				\
			data = convsample(data);			\
			*righth++ = data>>8;				\
			*rightl++ = (data>>2) & 0x3f;			\
			count--;					\
		}							\
	}								\
	*frameUsed += used;						\
	return used;							\
}

#define AMI_CT_S16BE(x)	(x)
#define AMI_CT_U16BE(x)	((x) ^ 0x8000)
#define AMI_CT_S16LE(x)	(le2be16((x)))
#define AMI_CT_U16LE(x)	(le2be16((x)) ^ 0x8000)

GENERATE_AMI_CT_16(ami_ct_s16be, AMI_CT_S16BE)
GENERATE_AMI_CT_16(ami_ct_u16be, AMI_CT_U16BE)
GENERATE_AMI_CT_16(ami_ct_s16le, AMI_CT_S16LE)
GENERATE_AMI_CT_16(ami_ct_u16le, AMI_CT_U16LE)


static TRANS transAmiga = {
	.ct_ulaw	= ami_ct_ulaw,
	.ct_alaw	= ami_ct_alaw,
	.ct_s8		= ami_ct_s8,
	.ct_u8		= ami_ct_u8,
	.ct_s16be	= ami_ct_s16be,
	.ct_u16be	= ami_ct_u16be,
	.ct_s16le	= ami_ct_s16le,
	.ct_u16le	= ami_ct_u16le,
};

/*** Low level stuff *********************************************************/

static inline void StopDMA(void)
{
	custom.aud[0].audvol = custom.aud[1].audvol = 0;
	custom.aud[2].audvol = custom.aud[3].audvol = 0;
	custom.dmacon = AMI_AUDIO_OFF;
	enable_heartbeat();
}

static void *AmiAlloc(unsigned int size, gfp_t flags)
{
	return amiga_chip_alloc((long)size, "dmasound [Paula]");
}

static void AmiFree(void *obj, unsigned int size)
{
	amiga_chip_free (obj);
}

static int __init AmiIrqInit(void)
{
	/* turn off DMA for audio channels */
	StopDMA();

	/* Register interrupt handler. */
	if (request_irq(IRQ_AMIGA_AUD0, AmiInterrupt, 0, "DMA sound",
			AmiInterrupt))
		return 0;
	return 1;
}

#ifdef MODULE
static void AmiIrqCleanUp(void)
{
	/* turn off DMA for audio channels */
	StopDMA();
	/* release the interrupt */
	free_irq(IRQ_AMIGA_AUD0, AmiInterrupt);
}
#endif /* MODULE */

static void AmiSilence(void)
{
	/* turn off DMA for audio channels */
	StopDMA();
}


static void AmiInit(void)
{
	int period, i;

	AmiSilence();

	if (dmasound.soft.speed)
		period = amiga_colorclock/dmasound.soft.speed-1;
	else
		period = amiga_audio_min_period;
	dmasound.hard = dmasound.soft;
	dmasound.trans_write = &transAmiga;

	if (period < amiga_audio_min_period) {
		/* we would need to squeeze the sound, but we won't do that */
		period = amiga_audio_min_period;
	} else if (period > 65535) {
		period = 65535;
	}
	dmasound.hard.speed = amiga_colorclock/(period+1);

	for (i = 0; i < 4; i++)
		custom.aud[i].audper = period;
	amiga_audio_period = period;
}


static int AmiSetFormat(int format)
{
	int size;

	/* Amiga sound DMA supports 8bit and 16bit (pseudo 14 bit) modes */

	switch (format) {
	case AFMT_QUERY:
		return dmasound.soft.format;
	case AFMT_MU_LAW:
	case AFMT_A_LAW:
	case AFMT_U8:
	case AFMT_S8:
		size = 8;
		break;
	case AFMT_S16_BE:
	case AFMT_U16_BE:
	case AFMT_S16_LE:
	case AFMT_U16_LE:
		size = 16;
		break;
	default: /* :-) */
		size = 8;
		format = AFMT_S8;
	}

	dmasound.soft.format = format;
	dmasound.soft.size = size;
	if (dmasound.minDev == SND_DEV_DSP) {
		dmasound.dsp.format = format;
		dmasound.dsp.size = dmasound.soft.size;
	}
	AmiInit();

	return format;
}


#define VOLUME_VOXWARE_TO_AMI(v) \
	(((v) < 0) ? 0 : ((v) > 100) ? 64 : ((v) * 64)/100)
#define VOLUME_AMI_TO_VOXWARE(v) ((v)*100/64)

static int AmiSetVolume(int volume)
{
	dmasound.volume_left = VOLUME_VOXWARE_TO_AMI(volume & 0xff);
	custom.aud[0].audvol = dmasound.volume_left;
	dmasound.volume_right = VOLUME_VOXWARE_TO_AMI((volume & 0xff00) >> 8);
	custom.aud[1].audvol = dmasound.volume_right;
	if (dmasound.hard.size == 16) {
		if (dmasound.volume_left == 64 && dmasound.volume_right == 64) {
			custom.aud[2].audvol = 1;
			custom.aud[3].audvol = 1;
		} else {
			custom.aud[2].audvol = 0;
			custom.aud[3].audvol = 0;
		}
	}
	return VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) |
	       (VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8);
}

static int AmiSetTreble(int treble)
{
	dmasound.treble = treble;
	if (treble < 50)
		ciaa.pra &= ~0x02;
	else
		ciaa.pra |= 0x02;
	return treble;
}


#define AMI_PLAY_LOADED		1
#define AMI_PLAY_PLAYING	2
#define AMI_PLAY_MASK		3


static void AmiPlayNextFrame(int index)
{
	u_char *start, *ch0, *ch1, *ch2, *ch3;
	u_long size;

	/* used by AmiPlay() if all doubts whether there really is something
	 * to be played are already wiped out.
	 */
	start = write_sq.buffers[write_sq.front];
	size = (write_sq.count == index ? write_sq.rear_size
					: write_sq.block_size)>>1;

	if (dmasound.hard.stereo) {
		ch0 = start;
		ch1 = start+write_sq_block_size_half;
		size >>= 1;
	} else {
		ch0 = start;
		ch1 = start;
	}

	disable_heartbeat();
	custom.aud[0].audvol = dmasound.volume_left;
	custom.aud[1].audvol = dmasound.volume_right;
	if (dmasound.hard.size == 8) {
		custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0);
		custom.aud[0].audlen = size;
		custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1);
		custom.aud[1].audlen = size;
		custom.dmacon = AMI_AUDIO_8;
	} else {
		size >>= 1;
		custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0);
		custom.aud[0].audlen = size;
		custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1);
		custom.aud[1].audlen = size;
		if (dmasound.volume_left == 64 && dmasound.volume_right == 64) {
			/* We can play pseudo 14-bit only with the maximum volume */
			ch3 = ch0+write_sq_block_size_quarter;
			ch2 = ch1+write_sq_block_size_quarter;
			custom.aud[2].audvol = 1;  /* we are being affected by the beeps */
			custom.aud[3].audvol = 1;  /* restoring volume here helps a bit */
			custom.aud[2].audlc = (u_short *)ZTWO_PADDR(ch2);
			custom.aud[2].audlen = size;
			custom.aud[3].audlc = (u_short *)ZTWO_PADDR(ch3);
			custom.aud[3].audlen = size;
			custom.dmacon = AMI_AUDIO_14;
		} else {
			custom.aud[2].audvol = 0;
			custom.aud[3].audvol = 0;
			custom.dmacon = AMI_AUDIO_8;
		}
	}
	write_sq.front = (write_sq.front+1) % write_sq.max_count;
	write_sq.active |= AMI_PLAY_LOADED;
}


static void AmiPlay(void)
{
	int minframes = 1;

	custom.intena = IF_AUD0;

	if (write_sq.active & AMI_PLAY_LOADED) {
		/* There's already a frame loaded */
		custom.intena = IF_SETCLR | IF_AUD0;
		return;
	}

	if (write_sq.active & AMI_PLAY_PLAYING)
		/* Increase threshold: frame 1 is already being played */
		minframes = 2;

	if (write_sq.count < minframes) {
		/* Nothing to do */
		custom.intena = IF_SETCLR | IF_AUD0;
		return;
	}

	if (write_sq.count <= minframes &&
	    write_sq.rear_size < write_sq.block_size && !write_sq.syncing) {
		/* hmmm, the only existing frame is not
		 * yet filled and we're not syncing?
		 */
		custom.intena = IF_SETCLR | IF_AUD0;
		return;
	}

	AmiPlayNextFrame(minframes);

	custom.intena = IF_SETCLR | IF_AUD0;
}


static irqreturn_t AmiInterrupt(int irq, void *dummy)
{
	int minframes = 1;

	custom.intena = IF_AUD0;

	if (!write_sq.active) {
		/* Playing was interrupted and sq_reset() has already cleared
		 * the sq variables, so better don't do anything here.
		 */
		WAKE_UP(write_sq.sync_queue);
		return IRQ_HANDLED;
	}

	if (write_sq.active & AMI_PLAY_PLAYING) {
		/* We've just finished a frame */
		write_sq.count--;
		WAKE_UP(write_sq.action_queue);
	}

	if (write_sq.active & AMI_PLAY_LOADED)
		/* Increase threshold: frame 1 is already being played */
		minframes = 2;

	/* Shift the flags */
	write_sq.active = (write_sq.active<<1) & AMI_PLAY_MASK;

	if (!write_sq.active)
		/* No frame is playing, disable audio DMA */
		StopDMA();

	custom.intena = IF_SETCLR | IF_AUD0;

	if (write_sq.count >= minframes)
		/* Try to play the next frame */
		AmiPlay();

	if (!write_sq.active)
		/* Nothing to play anymore.
		   Wake up a process waiting for audio output to drain. */
		WAKE_UP(write_sq.sync_queue);
	return IRQ_HANDLED;
}

/*** Mid level stuff *********************************************************/


/*
 * /dev/mixer abstraction
 */

static void __init AmiMixerInit(void)
{
	dmasound.volume_left = 64;
	dmasound.volume_right = 64;
	custom.aud[0].audvol = dmasound.volume_left;
	custom.aud[3].audvol = 1;	/* For pseudo 14bit */
	custom.aud[1].audvol = dmasound.volume_right;
	custom.aud[2].audvol = 1;	/* For pseudo 14bit */
	dmasound.treble = 50;
}

static int AmiMixerIoctl(u_int cmd, u_long arg)
{
	int data;
	switch (cmd) {
	    case SOUND_MIXER_READ_DEVMASK:
		    return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_TREBLE);
	    case SOUND_MIXER_READ_RECMASK:
		    return IOCTL_OUT(arg, 0);
	    case SOUND_MIXER_READ_STEREODEVS:
		    return IOCTL_OUT(arg, SOUND_MASK_VOLUME);
	    case SOUND_MIXER_READ_VOLUME:
		    return IOCTL_OUT(arg,
			    VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) |
			    VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8);
	    case SOUND_MIXER_WRITE_VOLUME:
		    IOCTL_IN(arg, data);
		    return IOCTL_OUT(arg, dmasound_set_volume(data));
	    case SOUND_MIXER_READ_TREBLE:
		    return IOCTL_OUT(arg, dmasound.treble);
	    case SOUND_MIXER_WRITE_TREBLE:
		    IOCTL_IN(arg, data);
		    return IOCTL_OUT(arg, dmasound_set_treble(data));
	}
	return -EINVAL;
}


static int AmiWriteSqSetup(void)
{
	write_sq_block_size_half = write_sq.block_size>>1;
	write_sq_block_size_quarter = write_sq_block_size_half>>1;
	return 0;
}


static int AmiStateInfo(char *buffer, size_t space)
{
	int len = 0;
	len += sprintf(buffer+len, "\tsound.volume_left = %d [0...64]\n",
		       dmasound.volume_left);
	len += sprintf(buffer+len, "\tsound.volume_right = %d [0...64]\n",
		       dmasound.volume_right);
	if (len >= space) {
		printk(KERN_ERR "dmasound_paula: overlowed state buffer alloc.\n") ;
		len = space ;
	}
	return len;
}


/*** Machine definitions *****************************************************/

static SETTINGS def_hard = {
	.format	= AFMT_S8,
	.stereo	= 0,
	.size	= 8,
	.speed	= 8000
} ;

static SETTINGS def_soft = {
	.format	= AFMT_U8,
	.stereo	= 0,
	.size	= 8,
	.speed	= 8000
} ;

static MACHINE machAmiga = {
	.name		= "Amiga",
	.name2		= "AMIGA",
	.owner		= THIS_MODULE,
	.dma_alloc	= AmiAlloc,
	.dma_free	= AmiFree,
	.irqinit	= AmiIrqInit,
#ifdef MODULE
	.irqcleanup	= AmiIrqCleanUp,
#endif /* MODULE */
	.init		= AmiInit,
	.silence	= AmiSilence,
	.setFormat	= AmiSetFormat,
	.setVolume	= AmiSetVolume,
	.setTreble	= AmiSetTreble,
	.play		= AmiPlay,
	.mixer_init	= AmiMixerInit,
	.mixer_ioctl	= AmiMixerIoctl,
	.write_sq_setup	= AmiWriteSqSetup,
	.state_info	= AmiStateInfo,
	.min_dsp_speed	= 8000,
	.version	= ((DMASOUND_PAULA_REVISION<<8) | DMASOUND_PAULA_EDITION),
	.hardware_afmts	= (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */
	.capabilities	= DSP_CAP_BATCH          /* As per SNDCTL_DSP_GETCAPS */
};


/*** Config & Setup **********************************************************/


static int __init dmasound_paula_init(void)
{
	int err;

	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(AMI_AUDIO)) {
	    if (!request_mem_region(CUSTOM_PHYSADDR+0xa0, 0x40,
				    "dmasound [Paula]"))
		return -EBUSY;
	    dmasound.mach = machAmiga;
	    dmasound.mach.default_hard = def_hard ;
	    dmasound.mach.default_soft = def_soft ;
	    err = dmasound_init();
	    if (err)
		release_mem_region(CUSTOM_PHYSADDR+0xa0, 0x40);
	    return err;
	} else
	    return -ENODEV;
}

static void __exit dmasound_paula_cleanup(void)
{
	dmasound_deinit();
	release_mem_region(CUSTOM_PHYSADDR+0xa0, 0x40);
}

module_init(dmasound_paula_init);
module_exit(dmasound_paula_cleanup);
MODULE_LICENSE("GPL");