| Dean Nelson | a2d974d | 2005-03-23 20:50:00 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * This file is subject to the terms and conditions of the GNU General Public | 
|  | 3 | * License.  See the file "COPYING" in the main directory of this archive | 
|  | 4 | * for more details. | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. | 
|  | 7 | */ | 
|  | 8 |  | 
|  | 9 |  | 
|  | 10 | /* | 
|  | 11 | * Cross Partition Network Interface (XPNET) support | 
|  | 12 | * | 
|  | 13 | *	XPNET provides a virtual network layered on top of the Cross | 
|  | 14 | *	Partition communication layer. | 
|  | 15 | * | 
|  | 16 | *	XPNET provides direct point-to-point and broadcast-like support | 
|  | 17 | *	for an ethernet-like device.  The ethernet broadcast medium is | 
|  | 18 | *	replaced with a point-to-point message structure which passes | 
|  | 19 | *	pointers to a DMA-capable block that a remote partition should | 
|  | 20 | *	retrieve and pass to the upper level networking layer. | 
|  | 21 | * | 
|  | 22 | */ | 
|  | 23 |  | 
|  | 24 |  | 
| Dean Nelson | a2d974d | 2005-03-23 20:50:00 -0700 | [diff] [blame] | 25 | #include <linux/module.h> | 
|  | 26 | #include <linux/kernel.h> | 
|  | 27 | #include <linux/pci.h> | 
|  | 28 | #include <linux/init.h> | 
|  | 29 | #include <linux/ioport.h> | 
|  | 30 | #include <linux/netdevice.h> | 
|  | 31 | #include <linux/etherdevice.h> | 
|  | 32 | #include <linux/delay.h> | 
|  | 33 | #include <linux/ethtool.h> | 
|  | 34 | #include <linux/mii.h> | 
|  | 35 | #include <linux/smp.h> | 
|  | 36 | #include <linux/string.h> | 
|  | 37 | #include <asm/sn/bte.h> | 
|  | 38 | #include <asm/sn/io.h> | 
|  | 39 | #include <asm/sn/sn_sal.h> | 
|  | 40 | #include <asm/types.h> | 
|  | 41 | #include <asm/atomic.h> | 
|  | 42 | #include <asm/sn/xp.h> | 
|  | 43 |  | 
|  | 44 |  | 
|  | 45 | /* | 
|  | 46 | * The message payload transferred by XPC. | 
|  | 47 | * | 
|  | 48 | * buf_pa is the physical address where the DMA should pull from. | 
|  | 49 | * | 
|  | 50 | * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a | 
|  | 51 | * cacheline boundary.  To accomplish this, we record the number of | 
|  | 52 | * bytes from the beginning of the first cacheline to the first useful | 
|  | 53 | * byte of the skb (leadin_ignore) and the number of bytes from the | 
|  | 54 | * last useful byte of the skb to the end of the last cacheline | 
|  | 55 | * (tailout_ignore). | 
|  | 56 | * | 
|  | 57 | * size is the number of bytes to transfer which includes the skb->len | 
|  | 58 | * (useful bytes of the senders skb) plus the leadin and tailout | 
|  | 59 | */ | 
|  | 60 | struct xpnet_message { | 
|  | 61 | u16 version;		/* Version for this message */ | 
|  | 62 | u16 embedded_bytes;	/* #of bytes embedded in XPC message */ | 
|  | 63 | u32 magic;		/* Special number indicating this is xpnet */ | 
|  | 64 | u64 buf_pa;		/* phys address of buffer to retrieve */ | 
|  | 65 | u32 size;		/* #of bytes in buffer */ | 
|  | 66 | u8 leadin_ignore;	/* #of bytes to ignore at the beginning */ | 
|  | 67 | u8 tailout_ignore;	/* #of bytes to ignore at the end */ | 
|  | 68 | unsigned char data;	/* body of small packets */ | 
|  | 69 | }; | 
|  | 70 |  | 
|  | 71 | /* | 
|  | 72 | * Determine the size of our message, the cacheline aligned size, | 
|  | 73 | * and then the number of message will request from XPC. | 
|  | 74 | * | 
|  | 75 | * XPC expects each message to exist in an individual cacheline. | 
|  | 76 | */ | 
|  | 77 | #define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) | 
|  | 78 | #define XPNET_MSG_DATA_MAX	\ | 
|  | 79 | (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) | 
|  | 80 | #define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE)) | 
|  | 81 | #define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) | 
|  | 82 |  | 
|  | 83 |  | 
|  | 84 | #define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1) | 
|  | 85 | #define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1) | 
|  | 86 |  | 
|  | 87 | /* | 
|  | 88 | * Version number of XPNET implementation. XPNET can always talk to versions | 
|  | 89 | * with same major #, and never talk to versions with a different version. | 
|  | 90 | */ | 
|  | 91 | #define _XPNET_VERSION(_major, _minor)	(((_major) << 4) | (_minor)) | 
|  | 92 | #define XPNET_VERSION_MAJOR(_v)		((_v) >> 4) | 
|  | 93 | #define XPNET_VERSION_MINOR(_v)		((_v) & 0xf) | 
|  | 94 |  | 
|  | 95 | #define	XPNET_VERSION _XPNET_VERSION(1,0)		/* version 1.0 */ | 
|  | 96 | #define	XPNET_VERSION_EMBED _XPNET_VERSION(1,1)		/* version 1.1 */ | 
|  | 97 | #define XPNET_MAGIC	0x88786984 /* "XNET" */ | 
|  | 98 |  | 
|  | 99 | #define XPNET_VALID_MSG(_m)						     \ | 
|  | 100 | ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ | 
|  | 101 | && (msg->magic == XPNET_MAGIC)) | 
|  | 102 |  | 
|  | 103 | #define XPNET_DEVICE_NAME		"xp0" | 
|  | 104 |  | 
|  | 105 |  | 
|  | 106 | /* | 
|  | 107 | * When messages are queued with xpc_send_notify, a kmalloc'd buffer | 
|  | 108 | * of the following type is passed as a notification cookie.  When the | 
|  | 109 | * notification function is called, we use the cookie to decide | 
|  | 110 | * whether all outstanding message sends have completed.  The skb can | 
|  | 111 | * then be released. | 
|  | 112 | */ | 
|  | 113 | struct xpnet_pending_msg { | 
|  | 114 | struct list_head free_list; | 
|  | 115 | struct sk_buff *skb; | 
|  | 116 | atomic_t use_count; | 
|  | 117 | }; | 
|  | 118 |  | 
|  | 119 | /* driver specific structure pointed to by the device structure */ | 
|  | 120 | struct xpnet_dev_private { | 
|  | 121 | struct net_device_stats stats; | 
|  | 122 | }; | 
|  | 123 |  | 
|  | 124 | struct net_device *xpnet_device; | 
|  | 125 |  | 
|  | 126 | /* | 
|  | 127 | * When we are notified of other partitions activating, we add them to | 
|  | 128 | * our bitmask of partitions to which we broadcast. | 
|  | 129 | */ | 
|  | 130 | static u64 xpnet_broadcast_partitions; | 
|  | 131 | /* protect above */ | 
| Ingo Molnar | a9f6a0d | 2005-09-09 13:10:41 -0700 | [diff] [blame] | 132 | static DEFINE_SPINLOCK(xpnet_broadcast_lock); | 
| Dean Nelson | a2d974d | 2005-03-23 20:50:00 -0700 | [diff] [blame] | 133 |  | 
|  | 134 | /* | 
|  | 135 | * Since the Block Transfer Engine (BTE) is being used for the transfer | 
|  | 136 | * and it relies upon cache-line size transfers, we need to reserve at | 
|  | 137 | * least one cache-line for head and tail alignment.  The BTE is | 
|  | 138 | * limited to 8MB transfers. | 
|  | 139 | * | 
|  | 140 | * Testing has shown that changing MTU to greater than 64KB has no effect | 
|  | 141 | * on TCP as the two sides negotiate a Max Segment Size that is limited | 
|  | 142 | * to 64K.  Other protocols May use packets greater than this, but for | 
|  | 143 | * now, the default is 64KB. | 
|  | 144 | */ | 
|  | 145 | #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) | 
|  | 146 | /* 32KB has been determined to be the ideal */ | 
|  | 147 | #define XPNET_DEF_MTU (0x8000UL) | 
|  | 148 |  | 
|  | 149 |  | 
|  | 150 | /* | 
|  | 151 | * The partition id is encapsulated in the MAC address.  The following | 
|  | 152 | * define locates the octet the partid is in. | 
|  | 153 | */ | 
|  | 154 | #define XPNET_PARTID_OCTET	1 | 
|  | 155 | #define XPNET_LICENSE_OCTET	2 | 
|  | 156 |  | 
|  | 157 |  | 
|  | 158 | /* | 
|  | 159 | * Define the XPNET debug device structure that is to be used with dev_dbg(), | 
|  | 160 | * dev_err(), dev_warn(), and dev_info(). | 
|  | 161 | */ | 
|  | 162 | struct device_driver xpnet_dbg_name = { | 
|  | 163 | .name = "xpnet" | 
|  | 164 | }; | 
|  | 165 |  | 
|  | 166 | struct device xpnet_dbg_subname = { | 
|  | 167 | .bus_id = {0},			/* set to "" */ | 
|  | 168 | .driver = &xpnet_dbg_name | 
|  | 169 | }; | 
|  | 170 |  | 
|  | 171 | struct device *xpnet = &xpnet_dbg_subname; | 
|  | 172 |  | 
|  | 173 | /* | 
|  | 174 | * Packet was recevied by XPC and forwarded to us. | 
|  | 175 | */ | 
|  | 176 | static void | 
|  | 177 | xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) | 
|  | 178 | { | 
|  | 179 | struct sk_buff *skb; | 
|  | 180 | bte_result_t bret; | 
|  | 181 | struct xpnet_dev_private *priv = | 
|  | 182 | (struct xpnet_dev_private *) xpnet_device->priv; | 
|  | 183 |  | 
|  | 184 |  | 
|  | 185 | if (!XPNET_VALID_MSG(msg)) { | 
|  | 186 | /* | 
|  | 187 | * Packet with a different XPC version.  Ignore. | 
|  | 188 | */ | 
|  | 189 | xpc_received(partid, channel, (void *) msg); | 
|  | 190 |  | 
|  | 191 | priv->stats.rx_errors++; | 
|  | 192 |  | 
|  | 193 | return; | 
|  | 194 | } | 
|  | 195 | dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, | 
|  | 196 | msg->leadin_ignore, msg->tailout_ignore); | 
|  | 197 |  | 
|  | 198 |  | 
|  | 199 | /* reserve an extra cache line */ | 
|  | 200 | skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); | 
|  | 201 | if (!skb) { | 
|  | 202 | dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", | 
|  | 203 | msg->size + L1_CACHE_BYTES); | 
|  | 204 |  | 
|  | 205 | xpc_received(partid, channel, (void *) msg); | 
|  | 206 |  | 
|  | 207 | priv->stats.rx_errors++; | 
|  | 208 |  | 
|  | 209 | return; | 
|  | 210 | } | 
|  | 211 |  | 
|  | 212 | /* | 
|  | 213 | * The allocated skb has some reserved space. | 
|  | 214 | * In order to use bte_copy, we need to get the | 
|  | 215 | * skb->data pointer moved forward. | 
|  | 216 | */ | 
|  | 217 | skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & | 
|  | 218 | (L1_CACHE_BYTES - 1)) + | 
|  | 219 | msg->leadin_ignore)); | 
|  | 220 |  | 
|  | 221 | /* | 
|  | 222 | * Update the tail pointer to indicate data actually | 
|  | 223 | * transferred. | 
|  | 224 | */ | 
|  | 225 | skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); | 
|  | 226 |  | 
|  | 227 | /* | 
|  | 228 | * Move the data over from the the other side. | 
|  | 229 | */ | 
|  | 230 | if ((XPNET_VERSION_MINOR(msg->version) == 1) && | 
|  | 231 | (msg->embedded_bytes != 0)) { | 
|  | 232 | dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " | 
|  | 233 | "%lu)\n", skb->data, &msg->data, | 
|  | 234 | (size_t) msg->embedded_bytes); | 
|  | 235 |  | 
|  | 236 | memcpy(skb->data, &msg->data, (size_t) msg->embedded_bytes); | 
|  | 237 | } else { | 
|  | 238 | dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" | 
|  | 239 | "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, | 
|  | 240 | (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | 
|  | 241 | msg->size); | 
|  | 242 |  | 
|  | 243 | bret = bte_copy(msg->buf_pa, | 
|  | 244 | __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | 
|  | 245 | msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); | 
|  | 246 |  | 
|  | 247 | if (bret != BTE_SUCCESS) { | 
|  | 248 | // >>> Need better way of cleaning skb.  Currently skb | 
|  | 249 | // >>> appears in_use and we can't just call | 
|  | 250 | // >>> dev_kfree_skb. | 
|  | 251 | dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " | 
|  | 252 | "error=0x%x\n", (void *)msg->buf_pa, | 
|  | 253 | (void *)__pa((u64)skb->data & | 
|  | 254 | ~(L1_CACHE_BYTES - 1)), | 
|  | 255 | msg->size, bret); | 
|  | 256 |  | 
|  | 257 | xpc_received(partid, channel, (void *) msg); | 
|  | 258 |  | 
|  | 259 | priv->stats.rx_errors++; | 
|  | 260 |  | 
|  | 261 | return; | 
|  | 262 | } | 
|  | 263 | } | 
|  | 264 |  | 
|  | 265 | dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | 
|  | 266 | "skb->end=0x%p skb->len=%d\n", (void *) skb->head, | 
|  | 267 | (void *) skb->data, (void *) skb->tail, (void *) skb->end, | 
|  | 268 | skb->len); | 
|  | 269 |  | 
|  | 270 | skb->dev = xpnet_device; | 
|  | 271 | skb->protocol = eth_type_trans(skb, xpnet_device); | 
|  | 272 | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | 273 |  | 
|  | 274 | dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p " | 
|  | 275 | "skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n", | 
|  | 276 | (void *) skb->head, (void *) skb->data, (void *) skb->tail, | 
|  | 277 | (void *) skb->end, skb->len); | 
|  | 278 |  | 
|  | 279 |  | 
|  | 280 | xpnet_device->last_rx = jiffies; | 
|  | 281 | priv->stats.rx_packets++; | 
|  | 282 | priv->stats.rx_bytes += skb->len + ETH_HLEN; | 
|  | 283 |  | 
|  | 284 | netif_rx_ni(skb); | 
|  | 285 | xpc_received(partid, channel, (void *) msg); | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 |  | 
|  | 289 | /* | 
|  | 290 | * This is the handler which XPC calls during any sort of change in | 
|  | 291 | * state or message reception on a connection. | 
|  | 292 | */ | 
|  | 293 | static void | 
|  | 294 | xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel, | 
|  | 295 | void *data, void *key) | 
|  | 296 | { | 
|  | 297 | long bp; | 
|  | 298 |  | 
|  | 299 |  | 
|  | 300 | DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | 
|  | 301 | DBUG_ON(channel != XPC_NET_CHANNEL); | 
|  | 302 |  | 
|  | 303 | switch(reason) { | 
|  | 304 | case xpcMsgReceived:	/* message received */ | 
|  | 305 | DBUG_ON(data == NULL); | 
|  | 306 |  | 
|  | 307 | xpnet_receive(partid, channel, (struct xpnet_message *) data); | 
|  | 308 | break; | 
|  | 309 |  | 
|  | 310 | case xpcConnected:	/* connection completed to a partition */ | 
|  | 311 | spin_lock_bh(&xpnet_broadcast_lock); | 
|  | 312 | xpnet_broadcast_partitions |= 1UL << (partid -1 ); | 
|  | 313 | bp = xpnet_broadcast_partitions; | 
|  | 314 | spin_unlock_bh(&xpnet_broadcast_lock); | 
|  | 315 |  | 
|  | 316 | netif_carrier_on(xpnet_device); | 
|  | 317 |  | 
|  | 318 | dev_dbg(xpnet, "%s connection created to partition %d; " | 
|  | 319 | "xpnet_broadcast_partitions=0x%lx\n", | 
|  | 320 | xpnet_device->name, partid, bp); | 
|  | 321 | break; | 
|  | 322 |  | 
|  | 323 | default: | 
|  | 324 | spin_lock_bh(&xpnet_broadcast_lock); | 
|  | 325 | xpnet_broadcast_partitions &= ~(1UL << (partid -1 )); | 
|  | 326 | bp = xpnet_broadcast_partitions; | 
|  | 327 | spin_unlock_bh(&xpnet_broadcast_lock); | 
|  | 328 |  | 
|  | 329 | if (bp == 0) { | 
|  | 330 | netif_carrier_off(xpnet_device); | 
|  | 331 | } | 
|  | 332 |  | 
|  | 333 | dev_dbg(xpnet, "%s disconnected from partition %d; " | 
|  | 334 | "xpnet_broadcast_partitions=0x%lx\n", | 
|  | 335 | xpnet_device->name, partid, bp); | 
|  | 336 | break; | 
|  | 337 |  | 
|  | 338 | } | 
|  | 339 | } | 
|  | 340 |  | 
|  | 341 |  | 
|  | 342 | static int | 
|  | 343 | xpnet_dev_open(struct net_device *dev) | 
|  | 344 | { | 
|  | 345 | enum xpc_retval ret; | 
|  | 346 |  | 
|  | 347 |  | 
|  | 348 | dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %d, " | 
|  | 349 | "%d)\n", XPC_NET_CHANNEL, xpnet_connection_activity, | 
|  | 350 | XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, | 
|  | 351 | XPNET_MAX_IDLE_KTHREADS); | 
|  | 352 |  | 
|  | 353 | ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, | 
|  | 354 | XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, | 
|  | 355 | XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); | 
|  | 356 | if (ret != xpcSuccess) { | 
|  | 357 | dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " | 
|  | 358 | "ret=%d\n", dev->name, ret); | 
|  | 359 |  | 
|  | 360 | return -ENOMEM; | 
|  | 361 | } | 
|  | 362 |  | 
|  | 363 | dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); | 
|  | 364 |  | 
|  | 365 | return 0; | 
|  | 366 | } | 
|  | 367 |  | 
|  | 368 |  | 
|  | 369 | static int | 
|  | 370 | xpnet_dev_stop(struct net_device *dev) | 
|  | 371 | { | 
|  | 372 | xpc_disconnect(XPC_NET_CHANNEL); | 
|  | 373 |  | 
|  | 374 | dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); | 
|  | 375 |  | 
|  | 376 | return 0; | 
|  | 377 | } | 
|  | 378 |  | 
|  | 379 |  | 
|  | 380 | static int | 
|  | 381 | xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) | 
|  | 382 | { | 
|  | 383 | /* 68 comes from min TCP+IP+MAC header */ | 
|  | 384 | if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { | 
|  | 385 | dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " | 
|  | 386 | "between 68 and %ld\n", dev->name, new_mtu, | 
|  | 387 | XPNET_MAX_MTU); | 
|  | 388 | return -EINVAL; | 
|  | 389 | } | 
|  | 390 |  | 
|  | 391 | dev->mtu = new_mtu; | 
|  | 392 | dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); | 
|  | 393 | return 0; | 
|  | 394 | } | 
|  | 395 |  | 
|  | 396 |  | 
|  | 397 | /* | 
|  | 398 | * Required for the net_device structure. | 
|  | 399 | */ | 
|  | 400 | static int | 
|  | 401 | xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) | 
|  | 402 | { | 
|  | 403 | return 0; | 
|  | 404 | } | 
|  | 405 |  | 
|  | 406 |  | 
|  | 407 | /* | 
|  | 408 | * Return statistics to the caller. | 
|  | 409 | */ | 
|  | 410 | static struct net_device_stats * | 
|  | 411 | xpnet_dev_get_stats(struct net_device *dev) | 
|  | 412 | { | 
|  | 413 | struct xpnet_dev_private *priv; | 
|  | 414 |  | 
|  | 415 |  | 
|  | 416 | priv = (struct xpnet_dev_private *) dev->priv; | 
|  | 417 |  | 
|  | 418 | return &priv->stats; | 
|  | 419 | } | 
|  | 420 |  | 
|  | 421 |  | 
|  | 422 | /* | 
|  | 423 | * Notification that the other end has received the message and | 
|  | 424 | * DMA'd the skb information.  At this point, they are done with | 
|  | 425 | * our side.  When all recipients are done processing, we | 
|  | 426 | * release the skb and then release our pending message structure. | 
|  | 427 | */ | 
|  | 428 | static void | 
|  | 429 | xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel, | 
|  | 430 | void *__qm) | 
|  | 431 | { | 
|  | 432 | struct xpnet_pending_msg *queued_msg = | 
|  | 433 | (struct xpnet_pending_msg *) __qm; | 
|  | 434 |  | 
|  | 435 |  | 
|  | 436 | DBUG_ON(queued_msg == NULL); | 
|  | 437 |  | 
|  | 438 | dev_dbg(xpnet, "message to %d notified with reason %d\n", | 
|  | 439 | partid, reason); | 
|  | 440 |  | 
|  | 441 | if (atomic_dec_return(&queued_msg->use_count) == 0) { | 
|  | 442 | dev_dbg(xpnet, "all acks for skb->head=-x%p\n", | 
|  | 443 | (void *) queued_msg->skb->head); | 
|  | 444 |  | 
|  | 445 | dev_kfree_skb_any(queued_msg->skb); | 
|  | 446 | kfree(queued_msg); | 
|  | 447 | } | 
|  | 448 | } | 
|  | 449 |  | 
|  | 450 |  | 
|  | 451 | /* | 
|  | 452 | * Network layer has formatted a packet (skb) and is ready to place it | 
|  | 453 | * "on the wire".  Prepare and send an xpnet_message to all partitions | 
|  | 454 | * which have connected with us and are targets of this packet. | 
|  | 455 | * | 
|  | 456 | * MAC-NOTE:  For the XPNET driver, the MAC address contains the | 
|  | 457 | * destination partition_id.  If the destination partition id word | 
|  | 458 | * is 0xff, this packet is to broadcast to all partitions. | 
|  | 459 | */ | 
|  | 460 | static int | 
|  | 461 | xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | 462 | { | 
|  | 463 | struct xpnet_pending_msg *queued_msg; | 
|  | 464 | enum xpc_retval ret; | 
|  | 465 | struct xpnet_message *msg; | 
|  | 466 | u64 start_addr, end_addr; | 
|  | 467 | long dp; | 
|  | 468 | u8 second_mac_octet; | 
|  | 469 | partid_t dest_partid; | 
|  | 470 | struct xpnet_dev_private *priv; | 
|  | 471 | u16 embedded_bytes; | 
|  | 472 |  | 
|  | 473 |  | 
|  | 474 | priv = (struct xpnet_dev_private *) dev->priv; | 
|  | 475 |  | 
|  | 476 |  | 
|  | 477 | dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | 
|  | 478 | "skb->end=0x%p skb->len=%d\n", (void *) skb->head, | 
|  | 479 | (void *) skb->data, (void *) skb->tail, (void *) skb->end, | 
|  | 480 | skb->len); | 
|  | 481 |  | 
|  | 482 |  | 
|  | 483 | /* | 
|  | 484 | * The xpnet_pending_msg tracks how many outstanding | 
|  | 485 | * xpc_send_notifies are relying on this skb.  When none | 
|  | 486 | * remain, release the skb. | 
|  | 487 | */ | 
|  | 488 | queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); | 
|  | 489 | if (queued_msg == NULL) { | 
|  | 490 | dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " | 
|  | 491 | "packet\n", sizeof(struct xpnet_pending_msg)); | 
|  | 492 |  | 
|  | 493 | priv->stats.tx_errors++; | 
|  | 494 |  | 
|  | 495 | return -ENOMEM; | 
|  | 496 | } | 
|  | 497 |  | 
|  | 498 |  | 
|  | 499 | /* get the beginning of the first cacheline and end of last */ | 
|  | 500 | start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1)); | 
|  | 501 | end_addr = L1_CACHE_ALIGN((u64) skb->tail); | 
|  | 502 |  | 
|  | 503 | /* calculate how many bytes to embed in the XPC message */ | 
|  | 504 | embedded_bytes = 0; | 
|  | 505 | if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { | 
|  | 506 | /* skb->data does fit so embed */ | 
|  | 507 | embedded_bytes = skb->len; | 
|  | 508 | } | 
|  | 509 |  | 
|  | 510 |  | 
|  | 511 | /* | 
|  | 512 | * Since the send occurs asynchronously, we set the count to one | 
|  | 513 | * and begin sending.  Any sends that happen to complete before | 
|  | 514 | * we are done sending will not free the skb.  We will be left | 
|  | 515 | * with that task during exit.  This also handles the case of | 
|  | 516 | * a packet destined for a partition which is no longer up. | 
|  | 517 | */ | 
|  | 518 | atomic_set(&queued_msg->use_count, 1); | 
|  | 519 | queued_msg->skb = skb; | 
|  | 520 |  | 
|  | 521 |  | 
|  | 522 | second_mac_octet = skb->data[XPNET_PARTID_OCTET]; | 
|  | 523 | if (second_mac_octet == 0xff) { | 
|  | 524 | /* we are being asked to broadcast to all partitions */ | 
|  | 525 | dp = xpnet_broadcast_partitions; | 
|  | 526 | } else if (second_mac_octet != 0) { | 
|  | 527 | dp = xpnet_broadcast_partitions & | 
|  | 528 | (1UL << (second_mac_octet - 1)); | 
|  | 529 | } else { | 
|  | 530 | /* 0 is an invalid partid.  Ignore */ | 
|  | 531 | dp = 0; | 
|  | 532 | } | 
|  | 533 | dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); | 
|  | 534 |  | 
|  | 535 | /* | 
|  | 536 | * If we wanted to allow promiscous mode to work like an | 
|  | 537 | * unswitched network, this would be a good point to OR in a | 
|  | 538 | * mask of partitions which should be receiving all packets. | 
|  | 539 | */ | 
|  | 540 |  | 
|  | 541 | /* | 
|  | 542 | * Main send loop. | 
|  | 543 | */ | 
|  | 544 | for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; | 
|  | 545 | dest_partid++) { | 
|  | 546 |  | 
|  | 547 |  | 
|  | 548 | if (!(dp & (1UL << (dest_partid - 1)))) { | 
|  | 549 | /* not destined for this partition */ | 
|  | 550 | continue; | 
|  | 551 | } | 
|  | 552 |  | 
|  | 553 | /* remove this partition from the destinations mask */ | 
|  | 554 | dp &= ~(1UL << (dest_partid - 1)); | 
|  | 555 |  | 
|  | 556 |  | 
|  | 557 | /* found a partition to send to */ | 
|  | 558 |  | 
|  | 559 | ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, | 
|  | 560 | XPC_NOWAIT, (void **)&msg); | 
|  | 561 | if (unlikely(ret != xpcSuccess)) { | 
|  | 562 | continue; | 
|  | 563 | } | 
|  | 564 |  | 
|  | 565 | msg->embedded_bytes = embedded_bytes; | 
|  | 566 | if (unlikely(embedded_bytes != 0)) { | 
|  | 567 | msg->version = XPNET_VERSION_EMBED; | 
|  | 568 | dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", | 
|  | 569 | &msg->data, skb->data, (size_t) embedded_bytes); | 
|  | 570 | memcpy(&msg->data, skb->data, (size_t) embedded_bytes); | 
|  | 571 | } else { | 
|  | 572 | msg->version = XPNET_VERSION; | 
|  | 573 | } | 
|  | 574 | msg->magic = XPNET_MAGIC; | 
|  | 575 | msg->size = end_addr - start_addr; | 
|  | 576 | msg->leadin_ignore = (u64) skb->data - start_addr; | 
|  | 577 | msg->tailout_ignore = end_addr - (u64) skb->tail; | 
|  | 578 | msg->buf_pa = __pa(start_addr); | 
|  | 579 |  | 
|  | 580 | dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa=" | 
|  | 581 | "0x%lx, msg->size=%u, msg->leadin_ignore=%u, " | 
|  | 582 | "msg->tailout_ignore=%u\n", dest_partid, | 
|  | 583 | XPC_NET_CHANNEL, msg->buf_pa, msg->size, | 
|  | 584 | msg->leadin_ignore, msg->tailout_ignore); | 
|  | 585 |  | 
|  | 586 |  | 
|  | 587 | atomic_inc(&queued_msg->use_count); | 
|  | 588 |  | 
|  | 589 | ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, | 
|  | 590 | xpnet_send_completed, queued_msg); | 
|  | 591 | if (unlikely(ret != xpcSuccess)) { | 
|  | 592 | atomic_dec(&queued_msg->use_count); | 
|  | 593 | continue; | 
|  | 594 | } | 
|  | 595 |  | 
|  | 596 | } | 
|  | 597 |  | 
|  | 598 | if (atomic_dec_return(&queued_msg->use_count) == 0) { | 
|  | 599 | dev_dbg(xpnet, "no partitions to receive packet destined for " | 
|  | 600 | "%d\n", dest_partid); | 
|  | 601 |  | 
|  | 602 |  | 
|  | 603 | dev_kfree_skb(skb); | 
|  | 604 | kfree(queued_msg); | 
|  | 605 | } | 
|  | 606 |  | 
|  | 607 | priv->stats.tx_packets++; | 
|  | 608 | priv->stats.tx_bytes += skb->len; | 
|  | 609 |  | 
|  | 610 | return 0; | 
|  | 611 | } | 
|  | 612 |  | 
|  | 613 |  | 
|  | 614 | /* | 
|  | 615 | * Deal with transmit timeouts coming from the network layer. | 
|  | 616 | */ | 
|  | 617 | static void | 
|  | 618 | xpnet_dev_tx_timeout (struct net_device *dev) | 
|  | 619 | { | 
|  | 620 | struct xpnet_dev_private *priv; | 
|  | 621 |  | 
|  | 622 |  | 
|  | 623 | priv = (struct xpnet_dev_private *) dev->priv; | 
|  | 624 |  | 
|  | 625 | priv->stats.tx_errors++; | 
|  | 626 | return; | 
|  | 627 | } | 
|  | 628 |  | 
|  | 629 |  | 
|  | 630 | static int __init | 
|  | 631 | xpnet_init(void) | 
|  | 632 | { | 
|  | 633 | int i; | 
|  | 634 | u32 license_num; | 
|  | 635 | int result = -ENOMEM; | 
|  | 636 |  | 
|  | 637 |  | 
| Dean Nelson | 408865c | 2005-09-08 10:46:58 -0500 | [diff] [blame] | 638 | if (!ia64_platform_is("sn2")) { | 
|  | 639 | return -ENODEV; | 
|  | 640 | } | 
|  | 641 |  | 
| Dean Nelson | a2d974d | 2005-03-23 20:50:00 -0700 | [diff] [blame] | 642 | dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); | 
|  | 643 |  | 
|  | 644 | /* | 
|  | 645 | * use ether_setup() to init the majority of our device | 
|  | 646 | * structure and then override the necessary pieces. | 
|  | 647 | */ | 
|  | 648 | xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), | 
|  | 649 | XPNET_DEVICE_NAME, ether_setup); | 
|  | 650 | if (xpnet_device == NULL) { | 
|  | 651 | return -ENOMEM; | 
|  | 652 | } | 
|  | 653 |  | 
|  | 654 | netif_carrier_off(xpnet_device); | 
|  | 655 |  | 
|  | 656 | xpnet_device->mtu = XPNET_DEF_MTU; | 
|  | 657 | xpnet_device->change_mtu = xpnet_dev_change_mtu; | 
|  | 658 | xpnet_device->open = xpnet_dev_open; | 
|  | 659 | xpnet_device->get_stats = xpnet_dev_get_stats; | 
|  | 660 | xpnet_device->stop = xpnet_dev_stop; | 
|  | 661 | xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; | 
|  | 662 | xpnet_device->tx_timeout = xpnet_dev_tx_timeout; | 
|  | 663 | xpnet_device->set_config = xpnet_dev_set_config; | 
|  | 664 |  | 
|  | 665 | /* | 
|  | 666 | * Multicast assumes the LSB of the first octet is set for multicast | 
|  | 667 | * MAC addresses.  We chose the first octet of the MAC to be unlikely | 
|  | 668 | * to collide with any vendor's officially issued MAC. | 
|  | 669 | */ | 
|  | 670 | xpnet_device->dev_addr[0] = 0xfe; | 
|  | 671 | xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; | 
|  | 672 | license_num = sn_partition_serial_number_val(); | 
|  | 673 | for (i = 3; i >= 0; i--) { | 
|  | 674 | xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = | 
|  | 675 | license_num & 0xff; | 
|  | 676 | license_num = license_num >> 8; | 
|  | 677 | } | 
|  | 678 |  | 
|  | 679 | /* | 
|  | 680 | * ether_setup() sets this to a multicast device.  We are | 
|  | 681 | * really not supporting multicast at this time. | 
|  | 682 | */ | 
|  | 683 | xpnet_device->flags &= ~IFF_MULTICAST; | 
|  | 684 |  | 
|  | 685 | /* | 
|  | 686 | * No need to checksum as it is a DMA transfer.  The BTE will | 
|  | 687 | * report an error if the data is not retrievable and the | 
|  | 688 | * packet will be dropped. | 
|  | 689 | */ | 
|  | 690 | xpnet_device->features = NETIF_F_NO_CSUM; | 
|  | 691 |  | 
|  | 692 | result = register_netdev(xpnet_device); | 
|  | 693 | if (result != 0) { | 
|  | 694 | free_netdev(xpnet_device); | 
|  | 695 | } | 
|  | 696 |  | 
|  | 697 | return result; | 
|  | 698 | } | 
|  | 699 | module_init(xpnet_init); | 
|  | 700 |  | 
|  | 701 |  | 
|  | 702 | static void __exit | 
|  | 703 | xpnet_exit(void) | 
|  | 704 | { | 
|  | 705 | dev_info(xpnet, "unregistering network device %s\n", | 
|  | 706 | xpnet_device[0].name); | 
|  | 707 |  | 
|  | 708 | unregister_netdev(xpnet_device); | 
|  | 709 |  | 
|  | 710 | free_netdev(xpnet_device); | 
|  | 711 | } | 
|  | 712 | module_exit(xpnet_exit); | 
|  | 713 |  | 
|  | 714 |  | 
|  | 715 | MODULE_AUTHOR("Silicon Graphics, Inc."); | 
|  | 716 | MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); | 
|  | 717 | MODULE_LICENSE("GPL"); | 
|  | 718 |  |