| Jochen Friedrich | b72dbae | 2009-02-02 14:50:09 -0300 | [diff] [blame] | 1 | /* | 
 | 2 |  *  Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner | 
 | 3 |  * | 
 | 4 |  *  Copyright (c) 2009 Jochen Friedrich <jochen@scram.de> | 
 | 5 |  * | 
 | 6 |  *  This program is free software; you can redistribute it and/or modify | 
 | 7 |  *  it under the terms of the GNU General Public License as published by | 
 | 8 |  *  the Free Software Foundation; either version 2 of the License, or | 
 | 9 |  *  (at your option) any later version. | 
 | 10 |  * | 
 | 11 |  *  This program is distributed in the hope that it will be useful, | 
 | 12 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 13 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 14 |  * | 
 | 15 |  *  GNU General Public License for more details. | 
 | 16 |  * | 
 | 17 |  *  You should have received a copy of the GNU General Public License | 
 | 18 |  *  along with this program; if not, write to the Free Software | 
 | 19 |  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= | 
 | 20 |  */ | 
 | 21 |  | 
 | 22 | #include <linux/module.h> | 
 | 23 | #include <linux/delay.h> | 
 | 24 | #include <linux/dvb/frontend.h> | 
 | 25 | #include <linux/i2c.h> | 
| Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 26 | #include <linux/slab.h> | 
| Jochen Friedrich | b72dbae | 2009-02-02 14:50:09 -0300 | [diff] [blame] | 27 |  | 
 | 28 | #include "dvb_frontend.h" | 
 | 29 |  | 
 | 30 | #include "mc44s803.h" | 
 | 31 | #include "mc44s803_priv.h" | 
 | 32 |  | 
 | 33 | #define mc_printk(level, format, arg...)	\ | 
 | 34 | 	printk(level "mc44s803: " format , ## arg) | 
 | 35 |  | 
 | 36 | /* Writes a single register */ | 
 | 37 | static int mc44s803_writereg(struct mc44s803_priv *priv, u32 val) | 
 | 38 | { | 
 | 39 | 	u8 buf[3]; | 
 | 40 | 	struct i2c_msg msg = { | 
 | 41 | 		.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 3 | 
 | 42 | 	}; | 
 | 43 |  | 
 | 44 | 	buf[0] = (val & 0xff0000) >> 16; | 
 | 45 | 	buf[1] = (val & 0xff00) >> 8; | 
 | 46 | 	buf[2] = (val & 0xff); | 
 | 47 |  | 
 | 48 | 	if (i2c_transfer(priv->i2c, &msg, 1) != 1) { | 
 | 49 | 		mc_printk(KERN_WARNING, "I2C write failed\n"); | 
 | 50 | 		return -EREMOTEIO; | 
 | 51 | 	} | 
 | 52 | 	return 0; | 
 | 53 | } | 
 | 54 |  | 
 | 55 | /* Reads a single register */ | 
 | 56 | static int mc44s803_readreg(struct mc44s803_priv *priv, u8 reg, u32 *val) | 
 | 57 | { | 
 | 58 | 	u32 wval; | 
 | 59 | 	u8 buf[3]; | 
 | 60 | 	int ret; | 
 | 61 | 	struct i2c_msg msg[] = { | 
 | 62 | 		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, | 
 | 63 | 		  .buf = buf, .len = 3 }, | 
 | 64 | 	}; | 
 | 65 |  | 
 | 66 | 	wval = MC44S803_REG_SM(MC44S803_REG_DATAREG, MC44S803_ADDR) | | 
 | 67 | 	       MC44S803_REG_SM(reg, MC44S803_D); | 
 | 68 |  | 
 | 69 | 	ret = mc44s803_writereg(priv, wval); | 
 | 70 | 	if (ret) | 
 | 71 | 		return ret; | 
 | 72 |  | 
 | 73 | 	if (i2c_transfer(priv->i2c, msg, 1) != 1) { | 
 | 74 | 		mc_printk(KERN_WARNING, "I2C read failed\n"); | 
 | 75 | 		return -EREMOTEIO; | 
 | 76 | 	} | 
 | 77 |  | 
 | 78 | 	*val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; | 
 | 79 |  | 
 | 80 | 	return 0; | 
 | 81 | } | 
 | 82 |  | 
 | 83 | static int mc44s803_release(struct dvb_frontend *fe) | 
 | 84 | { | 
 | 85 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 86 |  | 
 | 87 | 	fe->tuner_priv = NULL; | 
 | 88 | 	kfree(priv); | 
 | 89 |  | 
 | 90 | 	return 0; | 
 | 91 | } | 
 | 92 |  | 
 | 93 | static int mc44s803_init(struct dvb_frontend *fe) | 
 | 94 | { | 
 | 95 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 96 | 	u32 val; | 
 | 97 | 	int err; | 
 | 98 |  | 
 | 99 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 100 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
 | 101 |  | 
 | 102 | /* Reset chip */ | 
 | 103 | 	val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR) | | 
 | 104 | 	      MC44S803_REG_SM(1, MC44S803_RS); | 
 | 105 |  | 
 | 106 | 	err = mc44s803_writereg(priv, val); | 
 | 107 | 	if (err) | 
 | 108 | 		goto exit; | 
 | 109 |  | 
 | 110 | 	val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR); | 
 | 111 |  | 
 | 112 | 	err = mc44s803_writereg(priv, val); | 
 | 113 | 	if (err) | 
 | 114 | 		goto exit; | 
 | 115 |  | 
 | 116 | /* Power Up and Start Osc */ | 
 | 117 |  | 
 | 118 | 	val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) | | 
 | 119 | 	      MC44S803_REG_SM(0xC0, MC44S803_REFOSC) | | 
 | 120 | 	      MC44S803_REG_SM(1, MC44S803_OSCSEL); | 
 | 121 |  | 
 | 122 | 	err = mc44s803_writereg(priv, val); | 
 | 123 | 	if (err) | 
 | 124 | 		goto exit; | 
 | 125 |  | 
 | 126 | 	val = MC44S803_REG_SM(MC44S803_REG_POWER, MC44S803_ADDR) | | 
 | 127 | 	      MC44S803_REG_SM(0x200, MC44S803_POWER); | 
 | 128 |  | 
 | 129 | 	err = mc44s803_writereg(priv, val); | 
 | 130 | 	if (err) | 
 | 131 | 		goto exit; | 
 | 132 |  | 
 | 133 | 	msleep(10); | 
 | 134 |  | 
 | 135 | 	val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) | | 
 | 136 | 	      MC44S803_REG_SM(0x40, MC44S803_REFOSC) | | 
 | 137 | 	      MC44S803_REG_SM(1, MC44S803_OSCSEL); | 
 | 138 |  | 
 | 139 | 	err = mc44s803_writereg(priv, val); | 
 | 140 | 	if (err) | 
 | 141 | 		goto exit; | 
 | 142 |  | 
 | 143 | 	msleep(20); | 
 | 144 |  | 
 | 145 | /* Setup Mixer */ | 
 | 146 |  | 
 | 147 | 	val = MC44S803_REG_SM(MC44S803_REG_MIXER, MC44S803_ADDR) | | 
 | 148 | 	      MC44S803_REG_SM(1, MC44S803_TRI_STATE) | | 
 | 149 | 	      MC44S803_REG_SM(0x7F, MC44S803_MIXER_RES); | 
 | 150 |  | 
 | 151 | 	err = mc44s803_writereg(priv, val); | 
 | 152 | 	if (err) | 
 | 153 | 		goto exit; | 
 | 154 |  | 
 | 155 | /* Setup Cirquit Adjust */ | 
 | 156 |  | 
 | 157 | 	val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) | | 
 | 158 | 	      MC44S803_REG_SM(1, MC44S803_G1) | | 
 | 159 | 	      MC44S803_REG_SM(1, MC44S803_G3) | | 
 | 160 | 	      MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) | | 
 | 161 | 	      MC44S803_REG_SM(1, MC44S803_G6) | | 
 | 162 | 	      MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) | | 
 | 163 | 	      MC44S803_REG_SM(0x3, MC44S803_LP) | | 
 | 164 | 	      MC44S803_REG_SM(1, MC44S803_CLRF) | | 
 | 165 | 	      MC44S803_REG_SM(1, MC44S803_CLIF); | 
 | 166 |  | 
 | 167 | 	err = mc44s803_writereg(priv, val); | 
 | 168 | 	if (err) | 
 | 169 | 		goto exit; | 
 | 170 |  | 
 | 171 | 	val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) | | 
 | 172 | 	      MC44S803_REG_SM(1, MC44S803_G1) | | 
 | 173 | 	      MC44S803_REG_SM(1, MC44S803_G3) | | 
 | 174 | 	      MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) | | 
 | 175 | 	      MC44S803_REG_SM(1, MC44S803_G6) | | 
 | 176 | 	      MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) | | 
 | 177 | 	      MC44S803_REG_SM(0x3, MC44S803_LP); | 
 | 178 |  | 
 | 179 | 	err = mc44s803_writereg(priv, val); | 
 | 180 | 	if (err) | 
 | 181 | 		goto exit; | 
 | 182 |  | 
 | 183 | /* Setup Digtune */ | 
 | 184 |  | 
 | 185 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 186 | 	      MC44S803_REG_SM(3, MC44S803_XOD); | 
 | 187 |  | 
 | 188 | 	err = mc44s803_writereg(priv, val); | 
 | 189 | 	if (err) | 
 | 190 | 		goto exit; | 
 | 191 |  | 
 | 192 | /* Setup AGC */ | 
 | 193 |  | 
 | 194 | 	val = MC44S803_REG_SM(MC44S803_REG_LNAAGC, MC44S803_ADDR) | | 
 | 195 | 	      MC44S803_REG_SM(1, MC44S803_AT1) | | 
 | 196 | 	      MC44S803_REG_SM(1, MC44S803_AT2) | | 
 | 197 | 	      MC44S803_REG_SM(1, MC44S803_AGC_AN_DIG) | | 
 | 198 | 	      MC44S803_REG_SM(1, MC44S803_AGC_READ_EN) | | 
 | 199 | 	      MC44S803_REG_SM(1, MC44S803_LNA0); | 
 | 200 |  | 
 | 201 | 	err = mc44s803_writereg(priv, val); | 
 | 202 | 	if (err) | 
 | 203 | 		goto exit; | 
 | 204 |  | 
 | 205 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 206 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 | 207 | 	return 0; | 
 | 208 |  | 
 | 209 | exit: | 
 | 210 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 211 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 | 212 |  | 
 | 213 | 	mc_printk(KERN_WARNING, "I/O Error\n"); | 
 | 214 | 	return err; | 
 | 215 | } | 
 | 216 |  | 
 | 217 | static int mc44s803_set_params(struct dvb_frontend *fe, | 
 | 218 | 			       struct dvb_frontend_parameters *params) | 
 | 219 | { | 
 | 220 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 221 | 	u32 r1, r2, n1, n2, lo1, lo2, freq, val; | 
 | 222 | 	int err; | 
 | 223 |  | 
 | 224 | 	priv->frequency = params->frequency; | 
 | 225 |  | 
 | 226 | 	r1 = MC44S803_OSC / 1000000; | 
 | 227 | 	r2 = MC44S803_OSC /  100000; | 
 | 228 |  | 
 | 229 | 	n1 = (params->frequency + MC44S803_IF1 + 500000) / 1000000; | 
 | 230 | 	freq = MC44S803_OSC / r1 * n1; | 
 | 231 | 	lo1 = ((60 * n1) + (r1 / 2)) / r1; | 
 | 232 | 	freq = freq - params->frequency; | 
 | 233 |  | 
 | 234 | 	n2 = (freq - MC44S803_IF2 + 50000) / 100000; | 
 | 235 | 	lo2 = ((60 * n2) + (r2 / 2)) / r2; | 
 | 236 |  | 
 | 237 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 238 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
 | 239 |  | 
 | 240 | 	val = MC44S803_REG_SM(MC44S803_REG_REFDIV, MC44S803_ADDR) | | 
 | 241 | 	      MC44S803_REG_SM(r1-1, MC44S803_R1) | | 
 | 242 | 	      MC44S803_REG_SM(r2-1, MC44S803_R2) | | 
 | 243 | 	      MC44S803_REG_SM(1, MC44S803_REFBUF_EN); | 
 | 244 |  | 
 | 245 | 	err = mc44s803_writereg(priv, val); | 
 | 246 | 	if (err) | 
 | 247 | 		goto exit; | 
 | 248 |  | 
 | 249 | 	val = MC44S803_REG_SM(MC44S803_REG_LO1, MC44S803_ADDR) | | 
 | 250 | 	      MC44S803_REG_SM(n1-2, MC44S803_LO1); | 
 | 251 |  | 
 | 252 | 	err = mc44s803_writereg(priv, val); | 
 | 253 | 	if (err) | 
 | 254 | 		goto exit; | 
 | 255 |  | 
 | 256 | 	val = MC44S803_REG_SM(MC44S803_REG_LO2, MC44S803_ADDR) | | 
 | 257 | 	      MC44S803_REG_SM(n2-2, MC44S803_LO2); | 
 | 258 |  | 
 | 259 | 	err = mc44s803_writereg(priv, val); | 
 | 260 | 	if (err) | 
 | 261 | 		goto exit; | 
 | 262 |  | 
 | 263 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 264 | 	      MC44S803_REG_SM(1, MC44S803_DA) | | 
 | 265 | 	      MC44S803_REG_SM(lo1, MC44S803_LO_REF) | | 
 | 266 | 	      MC44S803_REG_SM(1, MC44S803_AT); | 
 | 267 |  | 
 | 268 | 	err = mc44s803_writereg(priv, val); | 
 | 269 | 	if (err) | 
 | 270 | 		goto exit; | 
 | 271 |  | 
 | 272 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 273 | 	      MC44S803_REG_SM(2, MC44S803_DA) | | 
 | 274 | 	      MC44S803_REG_SM(lo2, MC44S803_LO_REF) | | 
 | 275 | 	      MC44S803_REG_SM(1, MC44S803_AT); | 
 | 276 |  | 
 | 277 | 	err = mc44s803_writereg(priv, val); | 
 | 278 | 	if (err) | 
 | 279 | 		goto exit; | 
 | 280 |  | 
 | 281 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 282 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 | 283 |  | 
 | 284 | 	return 0; | 
 | 285 |  | 
 | 286 | exit: | 
 | 287 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 288 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 | 289 |  | 
 | 290 | 	mc_printk(KERN_WARNING, "I/O Error\n"); | 
 | 291 | 	return err; | 
 | 292 | } | 
 | 293 |  | 
 | 294 | static int mc44s803_get_frequency(struct dvb_frontend *fe, u32 *frequency) | 
 | 295 | { | 
 | 296 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 297 | 	*frequency = priv->frequency; | 
 | 298 | 	return 0; | 
 | 299 | } | 
 | 300 |  | 
 | 301 | static const struct dvb_tuner_ops mc44s803_tuner_ops = { | 
 | 302 | 	.info = { | 
 | 303 | 		.name           = "Freescale MC44S803", | 
 | 304 | 		.frequency_min  =   48000000, | 
 | 305 | 		.frequency_max  = 1000000000, | 
 | 306 | 		.frequency_step =     100000, | 
 | 307 | 	}, | 
 | 308 |  | 
 | 309 | 	.release       = mc44s803_release, | 
 | 310 | 	.init          = mc44s803_init, | 
 | 311 | 	.set_params    = mc44s803_set_params, | 
 | 312 | 	.get_frequency = mc44s803_get_frequency | 
 | 313 | }; | 
 | 314 |  | 
 | 315 | /* This functions tries to identify a MC44S803 tuner by reading the ID | 
 | 316 |    register. This is hasty. */ | 
 | 317 | struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe, | 
 | 318 | 	 struct i2c_adapter *i2c, struct mc44s803_config *cfg) | 
 | 319 | { | 
 | 320 | 	struct mc44s803_priv *priv; | 
 | 321 | 	u32 reg; | 
 | 322 | 	u8 id; | 
 | 323 | 	int ret; | 
 | 324 |  | 
 | 325 | 	reg = 0; | 
 | 326 |  | 
 | 327 | 	priv = kzalloc(sizeof(struct mc44s803_priv), GFP_KERNEL); | 
 | 328 | 	if (priv == NULL) | 
 | 329 | 		return NULL; | 
 | 330 |  | 
 | 331 | 	priv->cfg = cfg; | 
 | 332 | 	priv->i2c = i2c; | 
 | 333 | 	priv->fe  = fe; | 
 | 334 |  | 
 | 335 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 336 | 		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ | 
 | 337 |  | 
 | 338 | 	ret = mc44s803_readreg(priv, MC44S803_REG_ID, ®); | 
 | 339 | 	if (ret) | 
 | 340 | 		goto error; | 
 | 341 |  | 
 | 342 | 	id = MC44S803_REG_MS(reg, MC44S803_ID); | 
 | 343 |  | 
 | 344 | 	if (id != 0x14) { | 
 | 345 | 		mc_printk(KERN_ERR, "unsupported ID " | 
 | 346 | 		       "(%x should be 0x14)\n", id); | 
 | 347 | 		goto error; | 
 | 348 | 	} | 
 | 349 |  | 
 | 350 | 	mc_printk(KERN_INFO, "successfully identified (ID = %x)\n", id); | 
 | 351 | 	memcpy(&fe->ops.tuner_ops, &mc44s803_tuner_ops, | 
 | 352 | 	       sizeof(struct dvb_tuner_ops)); | 
 | 353 |  | 
 | 354 | 	fe->tuner_priv = priv; | 
 | 355 |  | 
 | 356 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 357 | 		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ | 
 | 358 |  | 
 | 359 | 	return fe; | 
 | 360 |  | 
 | 361 | error: | 
 | 362 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 363 | 		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ | 
 | 364 |  | 
 | 365 | 	kfree(priv); | 
 | 366 | 	return NULL; | 
 | 367 | } | 
 | 368 | EXPORT_SYMBOL(mc44s803_attach); | 
 | 369 |  | 
 | 370 | MODULE_AUTHOR("Jochen Friedrich"); | 
 | 371 | MODULE_DESCRIPTION("Freescale MC44S803 silicon tuner driver"); | 
 | 372 | MODULE_LICENSE("GPL"); |