| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> | 
 | 5 |  * | 
 | 6 |  * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ | 
 | 7 |  * 	by Dany Salman <salmandany@yahoo.fr> | 
 | 8 |  *	Copyright (c) 2004 TDF | 
 | 9 |  * | 
 | 10 |  * This program is free software; you can redistribute it and/or modify | 
 | 11 |  * it under the terms of the GNU General Public License as published by | 
 | 12 |  * the Free Software Foundation; either version 2 of the License, or | 
 | 13 |  * (at your option) any later version. | 
 | 14 |  * | 
 | 15 |  * This program is distributed in the hope that it will be useful, | 
 | 16 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 17 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 18 |  * GNU General Public License for more details. | 
 | 19 |  * | 
 | 20 |  * You should have received a copy of the GNU General Public License | 
 | 21 |  * along with this program; if not, write to the Free Software | 
 | 22 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | 23 |  * | 
 | 24 |  */ | 
 | 25 |  | 
 | 26 | #include <linux/i2c.h> | 
 | 27 | #include <linux/i2c-algo-bit.h> | 
 | 28 | #include <linux/init.h> | 
| Alexey Dobriyan | a6b7a40 | 2011-06-06 10:43:46 +0000 | [diff] [blame] | 29 | #include <linux/interrupt.h> | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 30 | #include <linux/kernel.h> | 
 | 31 | #include <linux/module.h> | 
 | 32 | #include <linux/pci.h> | 
 | 33 | #include <linux/dma-mapping.h> | 
| Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 34 | #include <linux/slab.h> | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 35 |  | 
 | 36 | #include "demux.h" | 
 | 37 | #include "dmxdev.h" | 
 | 38 | #include "dvb_demux.h" | 
 | 39 | #include "dvb_frontend.h" | 
 | 40 | #include "dvb_net.h" | 
 | 41 | #include "dvbdev.h" | 
 | 42 | #include "tda1004x.h" | 
 | 43 |  | 
| Janne Grunau | 78e9200 | 2008-04-09 19:13:13 -0300 | [diff] [blame] | 44 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | 
 | 45 |  | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 46 | #define DRIVER_NAME		"pluto2" | 
 | 47 |  | 
 | 48 | #define REG_PIDn(n)		((n) << 2)	/* PID n pattern registers */ | 
 | 49 | #define REG_PCAR		0x0020		/* PC address register */ | 
 | 50 | #define REG_TSCR		0x0024		/* TS ctrl & status */ | 
 | 51 | #define REG_MISC		0x0028		/* miscellaneous */ | 
 | 52 | #define REG_MMAC		0x002c		/* MSB MAC address */ | 
 | 53 | #define REG_IMAC		0x0030		/* ISB MAC address */ | 
 | 54 | #define REG_LMAC		0x0034		/* LSB MAC address */ | 
 | 55 | #define REG_SPID		0x0038		/* SPI data */ | 
 | 56 | #define REG_SLCS		0x003c		/* serial links ctrl/status */ | 
 | 57 |  | 
 | 58 | #define PID0_NOFIL		(0x0001 << 16) | 
 | 59 | #define PIDn_ENP		(0x0001 << 15) | 
 | 60 | #define PID0_END		(0x0001 << 14) | 
 | 61 | #define PID0_AFIL		(0x0001 << 13) | 
 | 62 | #define PIDn_PID		(0x1fff <<  0) | 
 | 63 |  | 
 | 64 | #define TSCR_NBPACKETS		(0x00ff << 24) | 
 | 65 | #define TSCR_DEM		(0x0001 << 17) | 
 | 66 | #define TSCR_DE			(0x0001 << 16) | 
 | 67 | #define TSCR_RSTN		(0x0001 << 15) | 
 | 68 | #define TSCR_MSKO		(0x0001 << 14) | 
 | 69 | #define TSCR_MSKA		(0x0001 << 13) | 
 | 70 | #define TSCR_MSKL		(0x0001 << 12) | 
 | 71 | #define TSCR_OVR		(0x0001 << 11) | 
 | 72 | #define TSCR_AFUL		(0x0001 << 10) | 
 | 73 | #define TSCR_LOCK		(0x0001 <<  9) | 
 | 74 | #define TSCR_IACK		(0x0001 <<  8) | 
 | 75 | #define TSCR_ADEF		(0x007f <<  0) | 
 | 76 |  | 
 | 77 | #define MISC_DVR		(0x0fff <<  4) | 
 | 78 | #define MISC_ALED		(0x0001 <<  3) | 
 | 79 | #define MISC_FRST		(0x0001 <<  2) | 
 | 80 | #define MISC_LED1		(0x0001 <<  1) | 
 | 81 | #define MISC_LED0		(0x0001 <<  0) | 
 | 82 |  | 
 | 83 | #define SPID_SPIDR		(0x00ff <<  0) | 
 | 84 |  | 
 | 85 | #define SLCS_SCL		(0x0001 <<  7) | 
 | 86 | #define SLCS_SDA		(0x0001 <<  6) | 
 | 87 | #define SLCS_CSN		(0x0001 <<  2) | 
 | 88 | #define SLCS_OVR		(0x0001 <<  1) | 
 | 89 | #define SLCS_SWC		(0x0001 <<  0) | 
 | 90 |  | 
 | 91 | #define TS_DMA_PACKETS		(8) | 
 | 92 | #define TS_DMA_BYTES		(188 * TS_DMA_PACKETS) | 
 | 93 |  | 
 | 94 | #define I2C_ADDR_TDA10046	0x10 | 
 | 95 | #define I2C_ADDR_TUA6034	0xc2 | 
 | 96 | #define NHWFILTERS		8 | 
 | 97 |  | 
 | 98 | struct pluto { | 
 | 99 | 	/* pci */ | 
 | 100 | 	struct pci_dev *pdev; | 
 | 101 | 	u8 __iomem *io_mem; | 
 | 102 |  | 
 | 103 | 	/* dvb */ | 
 | 104 | 	struct dmx_frontend hw_frontend; | 
 | 105 | 	struct dmx_frontend mem_frontend; | 
 | 106 | 	struct dmxdev dmxdev; | 
 | 107 | 	struct dvb_adapter dvb_adapter; | 
 | 108 | 	struct dvb_demux demux; | 
 | 109 | 	struct dvb_frontend *fe; | 
 | 110 | 	struct dvb_net dvbnet; | 
 | 111 | 	unsigned int full_ts_users; | 
 | 112 | 	unsigned int users; | 
 | 113 |  | 
 | 114 | 	/* i2c */ | 
 | 115 | 	struct i2c_algo_bit_data i2c_bit; | 
 | 116 | 	struct i2c_adapter i2c_adap; | 
 | 117 | 	unsigned int i2cbug; | 
 | 118 |  | 
 | 119 | 	/* irq */ | 
 | 120 | 	unsigned int overflow; | 
| Alan Cox | 0b61dca | 2009-03-26 17:47:48 -0300 | [diff] [blame] | 121 | 	unsigned int dead; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 122 |  | 
 | 123 | 	/* dma */ | 
 | 124 | 	dma_addr_t dma_addr; | 
 | 125 | 	u8 dma_buf[TS_DMA_BYTES]; | 
 | 126 | 	u8 dummy[4096]; | 
 | 127 | }; | 
 | 128 |  | 
 | 129 | static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) | 
 | 130 | { | 
 | 131 | 	return container_of(feed->demux, struct pluto, demux); | 
 | 132 | } | 
 | 133 |  | 
 | 134 | static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) | 
 | 135 | { | 
 | 136 | 	return container_of(fe->dvb, struct pluto, dvb_adapter); | 
 | 137 | } | 
 | 138 |  | 
 | 139 | static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) | 
 | 140 | { | 
 | 141 | 	return readl(&pluto->io_mem[reg]); | 
 | 142 | } | 
 | 143 |  | 
 | 144 | static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) | 
 | 145 | { | 
 | 146 | 	writel(val, &pluto->io_mem[reg]); | 
 | 147 | } | 
 | 148 |  | 
 | 149 | static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) | 
 | 150 | { | 
 | 151 | 	u32 val = readl(&pluto->io_mem[reg]); | 
 | 152 | 	val &= ~mask; | 
 | 153 | 	val |= bits; | 
 | 154 | 	writel(val, &pluto->io_mem[reg]); | 
 | 155 | } | 
 | 156 |  | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 157 | static void pluto_write_tscr(struct pluto *pluto, u32 val) | 
 | 158 | { | 
 | 159 | 	/* set the number of packets */ | 
 | 160 | 	val &= ~TSCR_ADEF; | 
 | 161 | 	val |= TS_DMA_PACKETS / 2; | 
 | 162 |  | 
 | 163 | 	pluto_writereg(pluto, REG_TSCR, val); | 
 | 164 | } | 
 | 165 |  | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 166 | static void pluto_setsda(void *data, int state) | 
 | 167 | { | 
 | 168 | 	struct pluto *pluto = data; | 
 | 169 |  | 
 | 170 | 	if (state) | 
 | 171 | 		pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); | 
 | 172 | 	else | 
 | 173 | 		pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); | 
 | 174 | } | 
 | 175 |  | 
 | 176 | static void pluto_setscl(void *data, int state) | 
 | 177 | { | 
 | 178 | 	struct pluto *pluto = data; | 
 | 179 |  | 
 | 180 | 	if (state) | 
 | 181 | 		pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); | 
 | 182 | 	else | 
 | 183 | 		pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); | 
 | 184 |  | 
 | 185 | 	/* try to detect i2c_inb() to workaround hardware bug: | 
 | 186 | 	 * reset SDA to high after SCL has been set to low */ | 
 | 187 | 	if ((state) && (pluto->i2cbug == 0)) { | 
 | 188 | 		pluto->i2cbug = 1; | 
 | 189 | 	} else { | 
 | 190 | 		if ((!state) && (pluto->i2cbug == 1)) | 
 | 191 | 			pluto_setsda(pluto, 1); | 
 | 192 | 		pluto->i2cbug = 0; | 
 | 193 | 	} | 
 | 194 | } | 
 | 195 |  | 
 | 196 | static int pluto_getsda(void *data) | 
 | 197 | { | 
 | 198 | 	struct pluto *pluto = data; | 
 | 199 |  | 
 | 200 | 	return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; | 
 | 201 | } | 
 | 202 |  | 
 | 203 | static int pluto_getscl(void *data) | 
 | 204 | { | 
 | 205 | 	struct pluto *pluto = data; | 
 | 206 |  | 
 | 207 | 	return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; | 
 | 208 | } | 
 | 209 |  | 
 | 210 | static void pluto_reset_frontend(struct pluto *pluto, int reenable) | 
 | 211 | { | 
 | 212 | 	u32 val = pluto_readreg(pluto, REG_MISC); | 
 | 213 |  | 
 | 214 | 	if (val & MISC_FRST) { | 
 | 215 | 		val &= ~MISC_FRST; | 
 | 216 | 		pluto_writereg(pluto, REG_MISC, val); | 
 | 217 | 	} | 
 | 218 | 	if (reenable) { | 
 | 219 | 		val |= MISC_FRST; | 
 | 220 | 		pluto_writereg(pluto, REG_MISC, val); | 
 | 221 | 	} | 
 | 222 | } | 
 | 223 |  | 
 | 224 | static void pluto_reset_ts(struct pluto *pluto, int reenable) | 
 | 225 | { | 
 | 226 | 	u32 val = pluto_readreg(pluto, REG_TSCR); | 
 | 227 |  | 
 | 228 | 	if (val & TSCR_RSTN) { | 
 | 229 | 		val &= ~TSCR_RSTN; | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 230 | 		pluto_write_tscr(pluto, val); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 231 | 	} | 
 | 232 | 	if (reenable) { | 
 | 233 | 		val |= TSCR_RSTN; | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 234 | 		pluto_write_tscr(pluto, val); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 235 | 	} | 
 | 236 | } | 
 | 237 |  | 
 | 238 | static void pluto_set_dma_addr(struct pluto *pluto) | 
 | 239 | { | 
| Al Viro | 67778b3 | 2008-06-22 14:20:39 -0300 | [diff] [blame] | 240 | 	pluto_writereg(pluto, REG_PCAR, pluto->dma_addr); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 241 | } | 
 | 242 |  | 
 | 243 | static int __devinit pluto_dma_map(struct pluto *pluto) | 
 | 244 | { | 
 | 245 | 	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, | 
 | 246 | 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
 | 247 |  | 
| FUJITA Tomonori | 8d8bb39 | 2008-07-25 19:44:49 -0700 | [diff] [blame] | 248 | 	return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 249 | } | 
 | 250 |  | 
 | 251 | static void pluto_dma_unmap(struct pluto *pluto) | 
 | 252 | { | 
 | 253 | 	pci_unmap_single(pluto->pdev, pluto->dma_addr, | 
 | 254 | 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
 | 255 | } | 
 | 256 |  | 
 | 257 | static int pluto_start_feed(struct dvb_demux_feed *f) | 
 | 258 | { | 
 | 259 | 	struct pluto *pluto = feed_to_pluto(f); | 
 | 260 |  | 
 | 261 | 	/* enable PID filtering */ | 
 | 262 | 	if (pluto->users++ == 0) | 
 | 263 | 		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); | 
 | 264 |  | 
 | 265 | 	if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) | 
 | 266 | 		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); | 
 | 267 | 	else if (pluto->full_ts_users++ == 0) | 
 | 268 | 		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); | 
 | 269 |  | 
 | 270 | 	return 0; | 
 | 271 | } | 
 | 272 |  | 
 | 273 | static int pluto_stop_feed(struct dvb_demux_feed *f) | 
 | 274 | { | 
 | 275 | 	struct pluto *pluto = feed_to_pluto(f); | 
 | 276 |  | 
 | 277 | 	/* disable PID filtering */ | 
 | 278 | 	if (--pluto->users == 0) | 
 | 279 | 		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); | 
 | 280 |  | 
 | 281 | 	if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) | 
 | 282 | 		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); | 
 | 283 | 	else if (--pluto->full_ts_users == 0) | 
 | 284 | 		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); | 
 | 285 |  | 
 | 286 | 	return 0; | 
 | 287 | } | 
 | 288 |  | 
 | 289 | static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) | 
 | 290 | { | 
 | 291 | 	/* synchronize the DMA transfer with the CPU | 
 | 292 | 	 * first so that we see updated contents. */ | 
 | 293 | 	pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, | 
 | 294 | 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
 | 295 |  | 
 | 296 | 	/* Workaround for broken hardware: | 
 | 297 | 	 * [1] On startup NBPACKETS seems to contain an uninitialized value, | 
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 298 | 	 *     but no packets have been transferred. | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 299 | 	 * [2] Sometimes (actually very often) NBPACKETS stays at zero | 
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 300 | 	 *     although one packet has been transferred. | 
| holger@muscate-magnussen.de | 4d84517 | 2007-05-01 09:25:56 -0300 | [diff] [blame] | 301 | 	 * [3] Sometimes (actually rarely), the card gets into an erroneous | 
 | 302 | 	 *     mode where it continuously generates interrupts, claiming it | 
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 303 | 	 *     has received nbpackets>TS_DMA_PACKETS packets, but no packet | 
 | 304 | 	 *     has been transferred. Only a reset seems to solve this | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 305 | 	 */ | 
 | 306 | 	if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { | 
| Andreas Oberritter | 6573dd7 | 2005-11-08 21:35:14 -0800 | [diff] [blame] | 307 | 		unsigned int i = 0; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 308 | 		while (pluto->dma_buf[i] == 0x47) | 
 | 309 | 			i += 188; | 
| Andreas Oberritter | 6573dd7 | 2005-11-08 21:35:14 -0800 | [diff] [blame] | 310 | 		nbpackets = i / 188; | 
| holger@muscate-magnussen.de | 4d84517 | 2007-05-01 09:25:56 -0300 | [diff] [blame] | 311 | 		if (i == 0) { | 
 | 312 | 			pluto_reset_ts(pluto, 1); | 
 | 313 | 			dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n"); | 
 | 314 | 		} | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 315 | 	} | 
 | 316 |  | 
 | 317 | 	dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); | 
 | 318 |  | 
 | 319 | 	/* clear the dma buffer. this is needed to be able to identify | 
 | 320 | 	 * new valid ts packets above */ | 
 | 321 | 	memset(pluto->dma_buf, 0, nbpackets * 188); | 
 | 322 |  | 
 | 323 | 	/* reset the dma address */ | 
 | 324 | 	pluto_set_dma_addr(pluto); | 
 | 325 |  | 
 | 326 | 	/* sync the buffer and give it back to the card */ | 
 | 327 | 	pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, | 
 | 328 | 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
 | 329 | } | 
 | 330 |  | 
| David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 331 | static irqreturn_t pluto_irq(int irq, void *dev_id) | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 332 | { | 
 | 333 | 	struct pluto *pluto = dev_id; | 
 | 334 | 	u32 tscr; | 
 | 335 |  | 
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 336 | 	/* check whether an interrupt occurred on this device */ | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 337 | 	tscr = pluto_readreg(pluto, REG_TSCR); | 
 | 338 | 	if (!(tscr & (TSCR_DE | TSCR_OVR))) | 
 | 339 | 		return IRQ_NONE; | 
 | 340 |  | 
 | 341 | 	if (tscr == 0xffffffff) { | 
| Alan Cox | 0b61dca | 2009-03-26 17:47:48 -0300 | [diff] [blame] | 342 | 		if (pluto->dead == 0) | 
 | 343 | 			dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n"); | 
 | 344 | 		/* It's dead Jim */ | 
 | 345 | 		pluto->dead = 1; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 346 | 		return IRQ_HANDLED; | 
 | 347 | 	} | 
 | 348 |  | 
 | 349 | 	/* dma end interrupt */ | 
 | 350 | 	if (tscr & TSCR_DE) { | 
 | 351 | 		pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); | 
 | 352 | 		/* overflow interrupt */ | 
 | 353 | 		if (tscr & TSCR_OVR) | 
 | 354 | 			pluto->overflow++; | 
 | 355 | 		if (pluto->overflow) { | 
 | 356 | 			dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", | 
 | 357 | 					pluto->overflow); | 
 | 358 | 			pluto_reset_ts(pluto, 1); | 
 | 359 | 			pluto->overflow = 0; | 
 | 360 | 		} | 
 | 361 | 	} else if (tscr & TSCR_OVR) { | 
 | 362 | 		pluto->overflow++; | 
 | 363 | 	} | 
 | 364 |  | 
 | 365 | 	/* ACK the interrupt */ | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 366 | 	pluto_write_tscr(pluto, tscr | TSCR_IACK); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 367 |  | 
 | 368 | 	return IRQ_HANDLED; | 
 | 369 | } | 
 | 370 |  | 
 | 371 | static void __devinit pluto_enable_irqs(struct pluto *pluto) | 
 | 372 | { | 
 | 373 | 	u32 val = pluto_readreg(pluto, REG_TSCR); | 
 | 374 |  | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 375 | 	/* disable AFUL and LOCK interrupts */ | 
 | 376 | 	val |= (TSCR_MSKA | TSCR_MSKL); | 
 | 377 | 	/* enable DMA and OVERFLOW interrupts */ | 
 | 378 | 	val &= ~(TSCR_DEM | TSCR_MSKO); | 
 | 379 | 	/* clear pending interrupts */ | 
 | 380 | 	val |= TSCR_IACK; | 
 | 381 |  | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 382 | 	pluto_write_tscr(pluto, val); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 383 | } | 
 | 384 |  | 
 | 385 | static void pluto_disable_irqs(struct pluto *pluto) | 
 | 386 | { | 
 | 387 | 	u32 val = pluto_readreg(pluto, REG_TSCR); | 
 | 388 |  | 
 | 389 | 	/* disable all interrupts */ | 
 | 390 | 	val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); | 
 | 391 | 	/* clear pending interrupts */ | 
 | 392 | 	val |= TSCR_IACK; | 
 | 393 |  | 
| Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 394 | 	pluto_write_tscr(pluto, val); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 395 | } | 
 | 396 |  | 
 | 397 | static int __devinit pluto_hw_init(struct pluto *pluto) | 
 | 398 | { | 
 | 399 | 	pluto_reset_frontend(pluto, 1); | 
 | 400 |  | 
 | 401 | 	/* set automatic LED control by FPGA */ | 
 | 402 | 	pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); | 
 | 403 |  | 
 | 404 | 	/* set data endianess */ | 
 | 405 | #ifdef __LITTLE_ENDIAN | 
 | 406 | 	pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); | 
 | 407 | #else | 
 | 408 | 	pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); | 
 | 409 | #endif | 
 | 410 | 	/* map DMA and set address */ | 
 | 411 | 	pluto_dma_map(pluto); | 
 | 412 | 	pluto_set_dma_addr(pluto); | 
 | 413 |  | 
 | 414 | 	/* enable interrupts */ | 
 | 415 | 	pluto_enable_irqs(pluto); | 
 | 416 |  | 
 | 417 | 	/* reset TS logic */ | 
 | 418 | 	pluto_reset_ts(pluto, 1); | 
 | 419 |  | 
 | 420 | 	return 0; | 
 | 421 | } | 
 | 422 |  | 
 | 423 | static void pluto_hw_exit(struct pluto *pluto) | 
 | 424 | { | 
 | 425 | 	/* disable interrupts */ | 
 | 426 | 	pluto_disable_irqs(pluto); | 
 | 427 |  | 
 | 428 | 	pluto_reset_ts(pluto, 0); | 
 | 429 |  | 
 | 430 | 	/* LED: disable automatic control, enable yellow, disable green */ | 
 | 431 | 	pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); | 
 | 432 |  | 
 | 433 | 	/* unmap DMA */ | 
 | 434 | 	pluto_dma_unmap(pluto); | 
 | 435 |  | 
 | 436 | 	pluto_reset_frontend(pluto, 0); | 
 | 437 | } | 
 | 438 |  | 
 | 439 | static inline u32 divide(u32 numerator, u32 denominator) | 
 | 440 | { | 
 | 441 | 	if (denominator == 0) | 
 | 442 | 		return ~0; | 
 | 443 |  | 
| Julia Lawall | 75b697f | 2009-08-01 16:48:41 -0300 | [diff] [blame] | 444 | 	return DIV_ROUND_CLOSEST(numerator, denominator); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 445 | } | 
 | 446 |  | 
 | 447 | /* LG Innotek TDTE-E001P (Infineon TUA6034) */ | 
| Andrew de Quincey | 4b4c915 | 2006-04-18 17:47:11 -0300 | [diff] [blame] | 448 | static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe, | 
 | 449 | 					 struct dvb_frontend_parameters *p) | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 450 | { | 
 | 451 | 	struct pluto *pluto = frontend_to_pluto(fe); | 
 | 452 | 	struct i2c_msg msg; | 
 | 453 | 	int ret; | 
 | 454 | 	u8 buf[4]; | 
 | 455 | 	u32 div; | 
 | 456 |  | 
 | 457 | 	// Fref = 166.667 Hz | 
 | 458 | 	// Fref * 3 = 500.000 Hz | 
 | 459 | 	// IF = 36166667 | 
 | 460 | 	// IF / Fref = 217 | 
 | 461 | 	//div = divide(p->frequency + 36166667, 166667); | 
 | 462 | 	div = divide(p->frequency * 3, 500000) + 217; | 
 | 463 | 	buf[0] = (div >> 8) & 0x7f; | 
 | 464 | 	buf[1] = (div >> 0) & 0xff; | 
 | 465 |  | 
 | 466 | 	if (p->frequency < 611000000) | 
 | 467 | 		buf[2] = 0xb4; | 
 | 468 | 	else if (p->frequency < 811000000) | 
 | 469 | 		buf[2] = 0xbc; | 
 | 470 | 	else | 
 | 471 | 		buf[2] = 0xf4; | 
 | 472 |  | 
 | 473 | 	// VHF: 174-230 MHz | 
 | 474 | 	// center: 350 MHz | 
 | 475 | 	// UHF: 470-862 MHz | 
 | 476 | 	if (p->frequency < 350000000) | 
 | 477 | 		buf[3] = 0x02; | 
 | 478 | 	else | 
 | 479 | 		buf[3] = 0x04; | 
 | 480 |  | 
 | 481 | 	if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) | 
 | 482 | 		buf[3] |= 0x08; | 
 | 483 |  | 
 | 484 | 	if (sizeof(buf) == 6) { | 
 | 485 | 		buf[4] = buf[2]; | 
 | 486 | 		buf[4] &= ~0x1c; | 
 | 487 | 		buf[4] |=  0x18; | 
 | 488 |  | 
 | 489 | 		buf[5] = (0 << 7) | (2 << 4); | 
 | 490 | 	} | 
 | 491 |  | 
 | 492 | 	msg.addr = I2C_ADDR_TUA6034 >> 1; | 
 | 493 | 	msg.flags = 0; | 
 | 494 | 	msg.buf = buf; | 
 | 495 | 	msg.len = sizeof(buf); | 
 | 496 |  | 
| Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 497 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 498 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 499 | 	ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); | 
 | 500 | 	if (ret < 0) | 
 | 501 | 		return ret; | 
 | 502 | 	else if (ret == 0) | 
 | 503 | 		return -EREMOTEIO; | 
 | 504 |  | 
 | 505 | 	return 0; | 
 | 506 | } | 
 | 507 |  | 
 | 508 | static int pluto2_request_firmware(struct dvb_frontend *fe, | 
 | 509 | 				   const struct firmware **fw, char *name) | 
 | 510 | { | 
 | 511 | 	struct pluto *pluto = frontend_to_pluto(fe); | 
 | 512 |  | 
 | 513 | 	return request_firmware(fw, name, &pluto->pdev->dev); | 
 | 514 | } | 
 | 515 |  | 
 | 516 | static struct tda1004x_config pluto2_fe_config __devinitdata = { | 
 | 517 | 	.demod_address = I2C_ADDR_TDA10046 >> 1, | 
 | 518 | 	.invert = 1, | 
 | 519 | 	.invert_oclk = 0, | 
 | 520 | 	.xtal_freq = TDA10046_XTAL_16M, | 
 | 521 | 	.agc_config = TDA10046_AGC_DEFAULT, | 
 | 522 | 	.if_freq = TDA10046_FREQ_3617, | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 523 | 	.request_firmware = pluto2_request_firmware, | 
 | 524 | }; | 
 | 525 |  | 
 | 526 | static int __devinit frontend_init(struct pluto *pluto) | 
 | 527 | { | 
 | 528 | 	int ret; | 
 | 529 |  | 
 | 530 | 	pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); | 
 | 531 | 	if (!pluto->fe) { | 
 | 532 | 		dev_err(&pluto->pdev->dev, "could not attach frontend\n"); | 
 | 533 | 		return -ENODEV; | 
 | 534 | 	} | 
| Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 535 | 	pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 536 |  | 
 | 537 | 	ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); | 
 | 538 | 	if (ret < 0) { | 
| Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 539 | 		if (pluto->fe->ops.release) | 
 | 540 | 			pluto->fe->ops.release(pluto->fe); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 541 | 		return ret; | 
 | 542 | 	} | 
 | 543 |  | 
 | 544 | 	return 0; | 
 | 545 | } | 
 | 546 |  | 
 | 547 | static void __devinit pluto_read_rev(struct pluto *pluto) | 
 | 548 | { | 
 | 549 | 	u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; | 
 | 550 | 	dev_info(&pluto->pdev->dev, "board revision %d.%d\n", | 
 | 551 | 			(val >> 12) & 0x0f, (val >> 4) & 0xff); | 
 | 552 | } | 
 | 553 |  | 
 | 554 | static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) | 
 | 555 | { | 
 | 556 | 	u32 val = pluto_readreg(pluto, REG_MMAC); | 
 | 557 | 	mac[0] = (val >> 8) & 0xff; | 
 | 558 | 	mac[1] = (val >> 0) & 0xff; | 
 | 559 |  | 
 | 560 | 	val = pluto_readreg(pluto, REG_IMAC); | 
 | 561 | 	mac[2] = (val >> 8) & 0xff; | 
 | 562 | 	mac[3] = (val >> 0) & 0xff; | 
 | 563 |  | 
 | 564 | 	val = pluto_readreg(pluto, REG_LMAC); | 
 | 565 | 	mac[4] = (val >> 8) & 0xff; | 
 | 566 | 	mac[5] = (val >> 0) & 0xff; | 
 | 567 |  | 
| Johannes Berg | 7c510e4 | 2008-10-27 17:47:26 -0700 | [diff] [blame] | 568 | 	dev_info(&pluto->pdev->dev, "MAC %pM\n", mac); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 569 | } | 
 | 570 |  | 
 | 571 | static int __devinit pluto_read_serial(struct pluto *pluto) | 
 | 572 | { | 
 | 573 | 	struct pci_dev *pdev = pluto->pdev; | 
 | 574 | 	unsigned int i, j; | 
 | 575 | 	u8 __iomem *cis; | 
 | 576 |  | 
 | 577 | 	cis = pci_iomap(pdev, 1, 0); | 
 | 578 | 	if (!cis) | 
 | 579 | 		return -EIO; | 
 | 580 |  | 
 | 581 | 	dev_info(&pdev->dev, "S/N "); | 
 | 582 |  | 
 | 583 | 	for (i = 0xe0; i < 0x100; i += 4) { | 
 | 584 | 		u32 val = readl(&cis[i]); | 
 | 585 | 		for (j = 0; j < 32; j += 8) { | 
 | 586 | 			if ((val & 0xff) == 0xff) | 
 | 587 | 				goto out; | 
 | 588 | 			printk("%c", val & 0xff); | 
 | 589 | 			val >>= 8; | 
 | 590 | 		} | 
 | 591 | 	} | 
 | 592 | out: | 
 | 593 | 	printk("\n"); | 
 | 594 | 	pci_iounmap(pdev, cis); | 
 | 595 |  | 
 | 596 | 	return 0; | 
 | 597 | } | 
 | 598 |  | 
 | 599 | static int __devinit pluto2_probe(struct pci_dev *pdev, | 
 | 600 | 				  const struct pci_device_id *ent) | 
 | 601 | { | 
 | 602 | 	struct pluto *pluto; | 
 | 603 | 	struct dvb_adapter *dvb_adapter; | 
 | 604 | 	struct dvb_demux *dvbdemux; | 
 | 605 | 	struct dmx_demux *dmx; | 
 | 606 | 	int ret = -ENOMEM; | 
 | 607 |  | 
| Panagiotis Issaris | 7408187 | 2006-01-11 19:40:56 -0200 | [diff] [blame] | 608 | 	pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 609 | 	if (!pluto) | 
 | 610 | 		goto out; | 
 | 611 |  | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 612 | 	pluto->pdev = pdev; | 
 | 613 |  | 
 | 614 | 	ret = pci_enable_device(pdev); | 
 | 615 | 	if (ret < 0) | 
 | 616 | 		goto err_kfree; | 
 | 617 |  | 
 | 618 | 	/* enable interrupts */ | 
 | 619 | 	pci_write_config_dword(pdev, 0x6c, 0x8000); | 
 | 620 |  | 
| Yang Hongyang | 284901a | 2009-04-06 19:01:15 -0700 | [diff] [blame] | 621 | 	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 622 | 	if (ret < 0) | 
 | 623 | 		goto err_pci_disable_device; | 
 | 624 |  | 
 | 625 | 	pci_set_master(pdev); | 
 | 626 |  | 
 | 627 | 	ret = pci_request_regions(pdev, DRIVER_NAME); | 
 | 628 | 	if (ret < 0) | 
 | 629 | 		goto err_pci_disable_device; | 
 | 630 |  | 
 | 631 | 	pluto->io_mem = pci_iomap(pdev, 0, 0x40); | 
 | 632 | 	if (!pluto->io_mem) { | 
 | 633 | 		ret = -EIO; | 
 | 634 | 		goto err_pci_release_regions; | 
 | 635 | 	} | 
 | 636 |  | 
 | 637 | 	pci_set_drvdata(pdev, pluto); | 
 | 638 |  | 
| Thomas Gleixner | 8076fe3 | 2006-07-01 19:29:37 -0700 | [diff] [blame] | 639 | 	ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 640 | 	if (ret < 0) | 
 | 641 | 		goto err_pci_iounmap; | 
 | 642 |  | 
 | 643 | 	ret = pluto_hw_init(pluto); | 
 | 644 | 	if (ret < 0) | 
 | 645 | 		goto err_free_irq; | 
 | 646 |  | 
 | 647 | 	/* i2c */ | 
 | 648 | 	i2c_set_adapdata(&pluto->i2c_adap, pluto); | 
 | 649 | 	strcpy(pluto->i2c_adap.name, DRIVER_NAME); | 
 | 650 | 	pluto->i2c_adap.owner = THIS_MODULE; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 651 | 	pluto->i2c_adap.dev.parent = &pdev->dev; | 
 | 652 | 	pluto->i2c_adap.algo_data = &pluto->i2c_bit; | 
 | 653 | 	pluto->i2c_bit.data = pluto; | 
 | 654 | 	pluto->i2c_bit.setsda = pluto_setsda; | 
 | 655 | 	pluto->i2c_bit.setscl = pluto_setscl; | 
 | 656 | 	pluto->i2c_bit.getsda = pluto_getsda; | 
 | 657 | 	pluto->i2c_bit.getscl = pluto_getscl; | 
 | 658 | 	pluto->i2c_bit.udelay = 10; | 
 | 659 | 	pluto->i2c_bit.timeout = 10; | 
 | 660 |  | 
 | 661 | 	/* Raise SCL and SDA */ | 
 | 662 | 	pluto_setsda(pluto, 1); | 
 | 663 | 	pluto_setscl(pluto, 1); | 
 | 664 |  | 
 | 665 | 	ret = i2c_bit_add_bus(&pluto->i2c_adap); | 
 | 666 | 	if (ret < 0) | 
 | 667 | 		goto err_pluto_hw_exit; | 
 | 668 |  | 
 | 669 | 	/* dvb */ | 
| Janne Grunau | 78e9200 | 2008-04-09 19:13:13 -0300 | [diff] [blame] | 670 | 	ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, | 
 | 671 | 				   THIS_MODULE, &pdev->dev, adapter_nr); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 672 | 	if (ret < 0) | 
| Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 673 | 		goto err_i2c_del_adapter; | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 674 |  | 
 | 675 | 	dvb_adapter = &pluto->dvb_adapter; | 
 | 676 |  | 
 | 677 | 	pluto_read_rev(pluto); | 
 | 678 | 	pluto_read_serial(pluto); | 
 | 679 | 	pluto_read_mac(pluto, dvb_adapter->proposed_mac); | 
 | 680 |  | 
 | 681 | 	dvbdemux = &pluto->demux; | 
 | 682 | 	dvbdemux->filternum = 256; | 
 | 683 | 	dvbdemux->feednum = 256; | 
 | 684 | 	dvbdemux->start_feed = pluto_start_feed; | 
 | 685 | 	dvbdemux->stop_feed = pluto_stop_feed; | 
 | 686 | 	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | | 
 | 687 | 			DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); | 
 | 688 | 	ret = dvb_dmx_init(dvbdemux); | 
 | 689 | 	if (ret < 0) | 
 | 690 | 		goto err_dvb_unregister_adapter; | 
 | 691 |  | 
 | 692 | 	dmx = &dvbdemux->dmx; | 
 | 693 |  | 
 | 694 | 	pluto->hw_frontend.source = DMX_FRONTEND_0; | 
 | 695 | 	pluto->mem_frontend.source = DMX_MEMORY_FE; | 
 | 696 | 	pluto->dmxdev.filternum = NHWFILTERS; | 
 | 697 | 	pluto->dmxdev.demux = dmx; | 
 | 698 |  | 
 | 699 | 	ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); | 
 | 700 | 	if (ret < 0) | 
 | 701 | 		goto err_dvb_dmx_release; | 
 | 702 |  | 
 | 703 | 	ret = dmx->add_frontend(dmx, &pluto->hw_frontend); | 
 | 704 | 	if (ret < 0) | 
 | 705 | 		goto err_dvb_dmxdev_release; | 
 | 706 |  | 
 | 707 | 	ret = dmx->add_frontend(dmx, &pluto->mem_frontend); | 
 | 708 | 	if (ret < 0) | 
 | 709 | 		goto err_remove_hw_frontend; | 
 | 710 |  | 
 | 711 | 	ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); | 
 | 712 | 	if (ret < 0) | 
 | 713 | 		goto err_remove_mem_frontend; | 
 | 714 |  | 
 | 715 | 	ret = frontend_init(pluto); | 
 | 716 | 	if (ret < 0) | 
 | 717 | 		goto err_disconnect_frontend; | 
 | 718 |  | 
 | 719 | 	dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); | 
 | 720 | out: | 
 | 721 | 	return ret; | 
 | 722 |  | 
 | 723 | err_disconnect_frontend: | 
 | 724 | 	dmx->disconnect_frontend(dmx); | 
 | 725 | err_remove_mem_frontend: | 
 | 726 | 	dmx->remove_frontend(dmx, &pluto->mem_frontend); | 
 | 727 | err_remove_hw_frontend: | 
 | 728 | 	dmx->remove_frontend(dmx, &pluto->hw_frontend); | 
 | 729 | err_dvb_dmxdev_release: | 
 | 730 | 	dvb_dmxdev_release(&pluto->dmxdev); | 
 | 731 | err_dvb_dmx_release: | 
 | 732 | 	dvb_dmx_release(dvbdemux); | 
 | 733 | err_dvb_unregister_adapter: | 
 | 734 | 	dvb_unregister_adapter(dvb_adapter); | 
| Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 735 | err_i2c_del_adapter: | 
 | 736 | 	i2c_del_adapter(&pluto->i2c_adap); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 737 | err_pluto_hw_exit: | 
 | 738 | 	pluto_hw_exit(pluto); | 
 | 739 | err_free_irq: | 
 | 740 | 	free_irq(pdev->irq, pluto); | 
 | 741 | err_pci_iounmap: | 
 | 742 | 	pci_iounmap(pdev, pluto->io_mem); | 
 | 743 | err_pci_release_regions: | 
 | 744 | 	pci_release_regions(pdev); | 
 | 745 | err_pci_disable_device: | 
 | 746 | 	pci_disable_device(pdev); | 
 | 747 | err_kfree: | 
 | 748 | 	pci_set_drvdata(pdev, NULL); | 
 | 749 | 	kfree(pluto); | 
 | 750 | 	goto out; | 
 | 751 | } | 
 | 752 |  | 
 | 753 | static void __devexit pluto2_remove(struct pci_dev *pdev) | 
 | 754 | { | 
 | 755 | 	struct pluto *pluto = pci_get_drvdata(pdev); | 
 | 756 | 	struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; | 
 | 757 | 	struct dvb_demux *dvbdemux = &pluto->demux; | 
 | 758 | 	struct dmx_demux *dmx = &dvbdemux->dmx; | 
 | 759 |  | 
 | 760 | 	dmx->close(dmx); | 
 | 761 | 	dvb_net_release(&pluto->dvbnet); | 
 | 762 | 	if (pluto->fe) | 
 | 763 | 		dvb_unregister_frontend(pluto->fe); | 
 | 764 |  | 
 | 765 | 	dmx->disconnect_frontend(dmx); | 
 | 766 | 	dmx->remove_frontend(dmx, &pluto->mem_frontend); | 
 | 767 | 	dmx->remove_frontend(dmx, &pluto->hw_frontend); | 
 | 768 | 	dvb_dmxdev_release(&pluto->dmxdev); | 
 | 769 | 	dvb_dmx_release(dvbdemux); | 
 | 770 | 	dvb_unregister_adapter(dvb_adapter); | 
| Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 771 | 	i2c_del_adapter(&pluto->i2c_adap); | 
| Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 772 | 	pluto_hw_exit(pluto); | 
 | 773 | 	free_irq(pdev->irq, pluto); | 
 | 774 | 	pci_iounmap(pdev, pluto->io_mem); | 
 | 775 | 	pci_release_regions(pdev); | 
 | 776 | 	pci_disable_device(pdev); | 
 | 777 | 	pci_set_drvdata(pdev, NULL); | 
 | 778 | 	kfree(pluto); | 
 | 779 | } | 
 | 780 |  | 
 | 781 | #ifndef PCI_VENDOR_ID_SCM | 
 | 782 | #define PCI_VENDOR_ID_SCM	0x0432 | 
 | 783 | #endif | 
 | 784 | #ifndef PCI_DEVICE_ID_PLUTO2 | 
 | 785 | #define PCI_DEVICE_ID_PLUTO2	0x0001 | 
 | 786 | #endif | 
 | 787 |  | 
 | 788 | static struct pci_device_id pluto2_id_table[] __devinitdata = { | 
 | 789 | 	{ | 
 | 790 | 		.vendor = PCI_VENDOR_ID_SCM, | 
 | 791 | 		.device = PCI_DEVICE_ID_PLUTO2, | 
 | 792 | 		.subvendor = PCI_ANY_ID, | 
 | 793 | 		.subdevice = PCI_ANY_ID, | 
 | 794 | 	}, { | 
 | 795 | 		/* empty */ | 
 | 796 | 	}, | 
 | 797 | }; | 
 | 798 |  | 
 | 799 | MODULE_DEVICE_TABLE(pci, pluto2_id_table); | 
 | 800 |  | 
 | 801 | static struct pci_driver pluto2_driver = { | 
 | 802 | 	.name = DRIVER_NAME, | 
 | 803 | 	.id_table = pluto2_id_table, | 
 | 804 | 	.probe = pluto2_probe, | 
 | 805 | 	.remove = __devexit_p(pluto2_remove), | 
 | 806 | }; | 
 | 807 |  | 
 | 808 | static int __init pluto2_init(void) | 
 | 809 | { | 
 | 810 | 	return pci_register_driver(&pluto2_driver); | 
 | 811 | } | 
 | 812 |  | 
 | 813 | static void __exit pluto2_exit(void) | 
 | 814 | { | 
 | 815 | 	pci_unregister_driver(&pluto2_driver); | 
 | 816 | } | 
 | 817 |  | 
 | 818 | module_init(pluto2_init); | 
 | 819 | module_exit(pluto2_exit); | 
 | 820 |  | 
 | 821 | MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); | 
 | 822 | MODULE_DESCRIPTION("Pluto2 driver"); | 
 | 823 | MODULE_LICENSE("GPL"); |