Blame - arch/arm/plat-mxc/Kconfig - android_kernel_htc_msm8960

blob: a5353fc0793f16ab17031464f2d5ac90f283c70e [file] [log] [blame]

Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	1	if ARCH_MXC
				2
Uwe Kleine-König	66384ee	2010-06-15 18:14:19 +0200	[diff] [blame]	3	source "arch/arm/plat-mxc/devices/Kconfig"
				4
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	5	menu "Freescale MXC Implementations"
				6
Uwe Kleine-König	7db4d88	2011-04-08 11:06:43 +0200	[diff] [blame]	7	config ARCH_MX50_SUPPORTED
				8	bool
				9
				10	config ARCH_MX53_SUPPORTED
				11	bool
				12
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	13	choice
Holger Schurig	6bbdbf2	2009-01-29 14:42:25 +0100	[diff] [blame]	14	prompt "Freescale CPU family:"
Robert Schwebel	d2db9aa	2008-04-02 10:29:30 +0100	[diff] [blame]	15	default ARCH_MX3
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	16
Paulius Zaleckas	cfca8b5	2008-11-14 11:01:38 +0100	[diff] [blame]	17	config ARCH_MX1
				18	bool "MX1-based"
				19	help
				20	This enables support for systems based on the Freescale i.MX1 family
				21
Juergen Beisert	1bd55a4	2008-07-05 10:03:02 +0200	[diff] [blame]	22	config ARCH_MX2
				23	bool "MX2-based"
				24	help
				25	This enables support for systems based on the Freescale i.MX2 family
				26
Sascha Hauer	8c25c36	2009-06-04 11:32:12 +0200	[diff] [blame]	27	config ARCH_MX25
				28	bool "MX25-based"
Sascha Hauer	8c25c36	2009-06-04 11:32:12 +0200	[diff] [blame]	29	help
				30	This enables support for systems based on the Freescale i.MX25 family
				31
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	32	config ARCH_MX3
				33	bool "MX3-based"
				34	help
				35	This enables support for systems based on the Freescale i.MX3 family
				36
Uwe Kleine-König	7db4d88	2011-04-08 11:06:43 +0200	[diff] [blame]	37	config ARCH_MX503
				38	bool "i.MX50 + i.MX53"
				39	select ARCH_MX50_SUPPORTED
				40	select ARCH_MX53_SUPPORTED
				41	help
				42	This enables support for machines using Freescale's i.MX50 and i.MX51
				43	processors.
				44
				45	config ARCH_MX51
				46	bool "i.MX51"
				47	select ARCH_MX51_SUPPORTED
Amit Kucheria	b996b58	2010-02-02 11:57:53 -0800	[diff] [blame]	48	help
				49	This enables support for systems based on the Freescale i.MX51 family
				50
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	51	endchoice
				52
Uwe Kleine-König	d109167	2010-06-10 15:11:13 +0200	[diff] [blame]	53	source "arch/arm/mach-imx/Kconfig"
Amit Kucheria	b996b58	2010-02-02 11:57:53 -0800	[diff] [blame]	54	source "arch/arm/mach-mx5/Kconfig"
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	55
				56	endmenu
				57
Darius Augulis	479c901	2008-09-09 11:29:41 +0200	[diff] [blame]	58	config MXC_IRQ_PRIOR
				59	bool "Use IRQ priority"
Darius Augulis	479c901	2008-09-09 11:29:41 +0200	[diff] [blame]	60	help
				61	Select this if you want to use prioritized IRQ handling.
				62	This feature prevents higher priority ISR to be interrupted
				63	by lower priority IRQ even IRQF_DISABLED flag is not set.
				64	This may be useful in embedded applications, where are strong
				65	requirements for timing.
				66	Say N here, unless you have a specialized requirement.
				67
Amit Kucheria	a003708	2009-12-03 22:36:41 +0200	[diff] [blame]	68	config MXC_TZIC
Sascha Hauer	ec4bb25	2010-11-05 09:47:21 +0100	[diff] [blame]	69	bool
Amit Kucheria	a003708	2009-12-03 22:36:41 +0200	[diff] [blame]	70
Sascha Hauer	c7259df	2010-11-05 09:37:22 +0100	[diff] [blame]	71	config MXC_AVIC
				72	bool
				73
Sascha Hauer	166091b	2009-01-16 15:17:16 +0100	[diff] [blame]	74	config MXC_PWM
				75	tristate "Enable PWM driver"
Holger Schurig	c010dba	2009-04-14 12:50:20 +0200	[diff] [blame]	76	select HAVE_PWM
Sascha Hauer	166091b	2009-01-16 15:17:16 +0100	[diff] [blame]	77	help
				78	Enable support for the i.MX PWM controller(s).
				79
Jason Wang	fa94f8d	2010-06-24 21:11:28 +0800	[diff] [blame]	80	config MXC_DEBUG_BOARD
				81	bool "Enable MXC debug board(for 3-stack)"
				82	help
				83	The debug board is an integral part of the MXC 3-stack(PDK)
				84	platforms, it can be attached or removed from the peripheral
				85	board. On debug board, several debug devices(ethernet, UART,
				86	buttons, LEDs and JTAG) are implemented. Between the MCU and
				87	these devices, a CPLD is added as a bridge which performs
				88	data/address de-multiplexing and decode, signal level shift,
				89	interrupt control and various board functions.
				90
Sascha Hauer	f2b8901	2010-08-19 14:08:04 +0200	[diff] [blame]	91	config HAVE_EPIT
				92	bool
				93
				94	config MXC_USE_EPIT
				95	bool "Use EPIT instead of GPT"
				96	depends on HAVE_EPIT
				97	help
				98	Use EPIT as the system timer on systems that have it. Normally you
				99	don't have a reason to do so as the EPIT has the same features and
				100	uses the same clocks as the GPT. Anyway, on some systems the GPT
				101	may be in use for other purposes.
				102
Daniel Mack	f4f8bda	2009-11-05 09:44:09 +0100	[diff] [blame]	103	config MXC_ULPI
				104	bool
				105
Alan Carvalho de Assis	45001e9	2009-04-02 12:38:41 -0300	[diff] [blame]	106	config ARCH_HAS_RNGA
				107	bool
Alan Carvalho de Assis	45001e9	2009-04-02 12:38:41 -0300	[diff] [blame]	108
Uwe Kleine-König	5e2e95f	2010-02-15 09:42:59 +0100	[diff] [blame]	109	config IMX_HAVE_IOMUX_V1
				110	bool
				111
Sascha Hauer	bca6ef1	2009-04-01 11:11:48 +0200	[diff] [blame]	112	config ARCH_MXC_IOMUX_V3
				113	bool
Sascha Hauer	9eedbdf	2009-10-29 17:12:39 +0100	[diff] [blame]	114
				115	config ARCH_MXC_AUDMUX_V1
				116	bool
				117
				118	config ARCH_MXC_AUDMUX_V2
				119	bool
				120
Dinh Nguyen	68a2f73	2010-10-12 11:29:01 -0500	[diff] [blame]	121	config IRAM_ALLOC
				122	bool
				123	select GENERIC_ALLOCATOR
				124
Quinn Jensen	52c543f	2007-07-09 22:06:53 +0100	[diff] [blame]	125	endif