| dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * Freescale STMP378X SPI master driver | 
 | 3 |  * | 
 | 4 |  * Author: dmitry pervushin <dimka@embeddedalley.com> | 
 | 5 |  * | 
 | 6 |  * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. | 
 | 7 |  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. | 
 | 8 |  */ | 
 | 9 |  | 
 | 10 | /* | 
 | 11 |  * The code contained herein is licensed under the GNU General Public | 
 | 12 |  * License. You may obtain a copy of the GNU General Public License | 
 | 13 |  * Version 2 or later at the following locations: | 
 | 14 |  * | 
 | 15 |  * http://www.opensource.org/licenses/gpl-license.html | 
 | 16 |  * http://www.gnu.org/copyleft/gpl.html | 
 | 17 |  */ | 
 | 18 | #include <linux/module.h> | 
 | 19 | #include <linux/init.h> | 
 | 20 | #include <linux/interrupt.h> | 
 | 21 | #include <linux/platform_device.h> | 
 | 22 | #include <linux/spi/spi.h> | 
 | 23 | #include <linux/err.h> | 
 | 24 | #include <linux/clk.h> | 
 | 25 | #include <linux/io.h> | 
 | 26 | #include <linux/dma-mapping.h> | 
 | 27 | #include <linux/delay.h> | 
 | 28 |  | 
 | 29 | #include <mach/platform.h> | 
 | 30 | #include <mach/stmp3xxx.h> | 
 | 31 | #include <mach/dma.h> | 
 | 32 | #include <mach/regs-ssp.h> | 
 | 33 | #include <mach/regs-apbh.h> | 
 | 34 |  | 
 | 35 |  | 
 | 36 | /* 0 means DMA mode(recommended, default), !0 - PIO mode */ | 
 | 37 | static int pio; | 
 | 38 | static int clock; | 
 | 39 |  | 
 | 40 | /* default timeout for busy waits is 2 seconds */ | 
 | 41 | #define STMP_SPI_TIMEOUT	(2 * HZ) | 
 | 42 |  | 
 | 43 | struct stmp_spi { | 
 | 44 | 	int		id; | 
 | 45 |  | 
 | 46 | 	void *  __iomem regs;	/* vaddr of the control registers */ | 
 | 47 |  | 
 | 48 | 	int		irq, err_irq; | 
 | 49 | 	u32		dma; | 
 | 50 | 	struct stmp3xxx_dma_descriptor d; | 
 | 51 |  | 
 | 52 | 	u32		speed_khz; | 
 | 53 | 	u32		saved_timings; | 
 | 54 | 	u32		divider; | 
 | 55 |  | 
 | 56 | 	struct clk	*clk; | 
 | 57 | 	struct device	*master_dev; | 
 | 58 |  | 
 | 59 | 	struct work_struct work; | 
 | 60 | 	struct workqueue_struct *workqueue; | 
 | 61 |  | 
 | 62 | 	/* lock protects queue access */ | 
 | 63 | 	spinlock_t lock; | 
 | 64 | 	struct list_head queue; | 
 | 65 |  | 
 | 66 | 	struct completion done; | 
 | 67 | }; | 
 | 68 |  | 
 | 69 | #define busy_wait(cond)							\ | 
 | 70 | 	({								\ | 
 | 71 | 	unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT;		\ | 
 | 72 | 	bool succeeded = false;						\ | 
 | 73 | 	do {								\ | 
 | 74 | 		if (cond) {						\ | 
 | 75 | 			succeeded = true;				\ | 
 | 76 | 			break;						\ | 
 | 77 | 		}							\ | 
 | 78 | 		cpu_relax();						\ | 
| Robert P. J. Day | 68ea2d8 | 2010-01-20 13:49:44 -0700 | [diff] [blame] | 79 | 	} while (time_before(jiffies, end_jiffies));			\ | 
| dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 80 | 	succeeded;							\ | 
 | 81 | 	}) | 
 | 82 |  | 
 | 83 | /** | 
 | 84 |  * stmp_spi_init_hw | 
 | 85 |  * Initialize the SSP port | 
 | 86 |  */ | 
 | 87 | static int stmp_spi_init_hw(struct stmp_spi *ss) | 
 | 88 | { | 
 | 89 | 	int err = 0; | 
 | 90 | 	void *pins = ss->master_dev->platform_data; | 
 | 91 |  | 
 | 92 | 	err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); | 
 | 93 | 	if (err) | 
 | 94 | 		goto out; | 
 | 95 |  | 
 | 96 | 	ss->clk = clk_get(NULL, "ssp"); | 
 | 97 | 	if (IS_ERR(ss->clk)) { | 
 | 98 | 		err = PTR_ERR(ss->clk); | 
 | 99 | 		goto out_free_pins; | 
 | 100 | 	} | 
 | 101 | 	clk_enable(ss->clk); | 
 | 102 |  | 
 | 103 | 	stmp3xxx_reset_block(ss->regs, false); | 
 | 104 | 	stmp3xxx_dma_reset_channel(ss->dma); | 
 | 105 |  | 
 | 106 | 	return 0; | 
 | 107 |  | 
 | 108 | out_free_pins: | 
 | 109 | 	stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); | 
 | 110 | out: | 
 | 111 | 	return err; | 
 | 112 | } | 
 | 113 |  | 
 | 114 | static void stmp_spi_release_hw(struct stmp_spi *ss) | 
 | 115 | { | 
 | 116 | 	void *pins = ss->master_dev->platform_data; | 
 | 117 |  | 
 | 118 | 	if (ss->clk && !IS_ERR(ss->clk)) { | 
 | 119 | 		clk_disable(ss->clk); | 
 | 120 | 		clk_put(ss->clk); | 
 | 121 | 	} | 
 | 122 | 	stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); | 
 | 123 | } | 
 | 124 |  | 
 | 125 | static int stmp_spi_setup_transfer(struct spi_device *spi, | 
 | 126 | 		struct spi_transfer *t) | 
 | 127 | { | 
 | 128 | 	u8 bits_per_word; | 
 | 129 | 	u32 hz; | 
 | 130 | 	struct stmp_spi *ss = spi_master_get_devdata(spi->master); | 
 | 131 | 	u16 rate; | 
 | 132 |  | 
 | 133 | 	bits_per_word = spi->bits_per_word; | 
 | 134 | 	if (t && t->bits_per_word) | 
 | 135 | 		bits_per_word = t->bits_per_word; | 
 | 136 |  | 
 | 137 | 	/* | 
 | 138 | 	 * Calculate speed: | 
 | 139 | 	 *	- by default, use maximum speed from ssp clk | 
 | 140 | 	 *	- if device overrides it, use it | 
 | 141 | 	 *	- if transfer specifies other speed, use transfer's one | 
 | 142 | 	 */ | 
 | 143 | 	hz = 1000 * ss->speed_khz / ss->divider; | 
 | 144 | 	if (spi->max_speed_hz) | 
 | 145 | 		hz = min(hz, spi->max_speed_hz); | 
 | 146 | 	if (t && t->speed_hz) | 
 | 147 | 		hz = min(hz, t->speed_hz); | 
 | 148 |  | 
 | 149 | 	if (hz == 0) { | 
 | 150 | 		dev_err(&spi->dev, "Cannot continue with zero clock\n"); | 
 | 151 | 		return -EINVAL; | 
 | 152 | 	} | 
 | 153 |  | 
 | 154 | 	if (bits_per_word != 8) { | 
 | 155 | 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", | 
 | 156 | 			__func__, bits_per_word); | 
 | 157 | 		return -EINVAL; | 
 | 158 | 	} | 
 | 159 |  | 
 | 160 | 	dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", | 
 | 161 | 		hz, ss->speed_khz, ss->divider, | 
 | 162 | 		ss->speed_khz * 1000 / ss->divider); | 
 | 163 |  | 
 | 164 | 	if (ss->speed_khz * 1000 / ss->divider < hz) { | 
 | 165 | 		dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", | 
 | 166 | 			__func__, hz); | 
 | 167 | 		return -EINVAL; | 
 | 168 | 	} | 
 | 169 |  | 
 | 170 | 	rate = 1000 * ss->speed_khz/ss->divider/hz; | 
 | 171 |  | 
 | 172 | 	writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE)		| | 
 | 173 | 	       BF(rate - 1, SSP_TIMING_CLOCK_RATE), | 
 | 174 | 	       HW_SSP_TIMING + ss->regs); | 
 | 175 |  | 
 | 176 | 	writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE)		| | 
 | 177 | 	       BF(4 /* 8 bits   */, SSP_CTRL1_WORD_LENGTH)	| | 
 | 178 | 	       ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | | 
 | 179 | 	       ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | | 
 | 180 | 	       (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), | 
 | 181 | 	       ss->regs + HW_SSP_CTRL1); | 
 | 182 |  | 
 | 183 | 	return 0; | 
 | 184 | } | 
 | 185 |  | 
 | 186 | static int stmp_spi_setup(struct spi_device *spi) | 
 | 187 | { | 
 | 188 | 	/* spi_setup() does basic checks, | 
 | 189 | 	 * stmp_spi_setup_transfer() does more later | 
 | 190 | 	 */ | 
 | 191 | 	if (spi->bits_per_word != 8) { | 
 | 192 | 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", | 
 | 193 | 			__func__, spi->bits_per_word); | 
 | 194 | 		return -EINVAL; | 
 | 195 | 	} | 
 | 196 | 	return 0; | 
 | 197 | } | 
 | 198 |  | 
 | 199 | static inline u32 stmp_spi_cs(unsigned cs) | 
 | 200 | { | 
 | 201 | 	return  ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | | 
 | 202 | 		((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); | 
 | 203 | } | 
 | 204 |  | 
 | 205 | static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, | 
 | 206 | 		unsigned char *buf, dma_addr_t dma_buf, int len, | 
 | 207 | 		int first, int last, bool write) | 
 | 208 | { | 
 | 209 | 	u32 c0 = 0; | 
 | 210 | 	dma_addr_t spi_buf_dma = dma_buf; | 
 | 211 | 	int status = 0; | 
 | 212 | 	enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; | 
 | 213 |  | 
 | 214 | 	c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); | 
 | 215 | 	c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); | 
 | 216 | 	c0 |= (write ? 0 : BM_SSP_CTRL0_READ); | 
 | 217 | 	c0 |= BM_SSP_CTRL0_DATA_XFER; | 
 | 218 |  | 
 | 219 | 	c0 |= stmp_spi_cs(cs); | 
 | 220 |  | 
 | 221 | 	c0 |= BF(len, SSP_CTRL0_XFER_COUNT); | 
 | 222 |  | 
 | 223 | 	if (!dma_buf) | 
 | 224 | 		spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); | 
 | 225 |  | 
 | 226 | 	ss->d.command->cmd = | 
 | 227 | 		BF(len, APBH_CHn_CMD_XFER_COUNT)	| | 
 | 228 | 		BF(1, APBH_CHn_CMD_CMDWORDS)		| | 
 | 229 | 		BM_APBH_CHn_CMD_WAIT4ENDCMD		| | 
 | 230 | 		BM_APBH_CHn_CMD_IRQONCMPLT		| | 
 | 231 | 		BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : | 
 | 232 | 			   BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, | 
 | 233 | 		   APBH_CHn_CMD_COMMAND); | 
 | 234 | 	ss->d.command->pio_words[0] = c0; | 
 | 235 | 	ss->d.command->buf_ptr = spi_buf_dma; | 
 | 236 |  | 
 | 237 | 	stmp3xxx_dma_reset_channel(ss->dma); | 
 | 238 | 	stmp3xxx_dma_clear_interrupt(ss->dma); | 
 | 239 | 	stmp3xxx_dma_enable_interrupt(ss->dma); | 
 | 240 | 	init_completion(&ss->done); | 
 | 241 | 	stmp3xxx_dma_go(ss->dma, &ss->d, 1); | 
 | 242 | 	wait_for_completion(&ss->done); | 
 | 243 |  | 
 | 244 | 	if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) | 
| Roel Kluin | b6b24c7 | 2009-11-17 14:06:14 -0800 | [diff] [blame] | 245 | 		status = -ETIMEDOUT; | 
| dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 246 |  | 
 | 247 | 	if (!dma_buf) | 
 | 248 | 		dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); | 
 | 249 |  | 
 | 250 | 	return status; | 
 | 251 | } | 
 | 252 |  | 
 | 253 | static inline void stmp_spi_enable(struct stmp_spi *ss) | 
 | 254 | { | 
 | 255 | 	stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); | 
 | 256 | 	stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); | 
 | 257 | } | 
 | 258 |  | 
 | 259 | static inline void stmp_spi_disable(struct stmp_spi *ss) | 
 | 260 | { | 
 | 261 | 	stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); | 
 | 262 | 	stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); | 
 | 263 | } | 
 | 264 |  | 
 | 265 | static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, | 
 | 266 | 		unsigned char *buf, int len, | 
 | 267 | 		bool first, bool last, bool write) | 
 | 268 | { | 
 | 269 | 	if (first) | 
 | 270 | 		stmp_spi_enable(ss); | 
 | 271 |  | 
 | 272 | 	stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); | 
 | 273 |  | 
 | 274 | 	while (len--) { | 
 | 275 | 		if (last && len <= 0) | 
 | 276 | 			stmp_spi_disable(ss); | 
 | 277 |  | 
 | 278 | 		stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, | 
 | 279 | 				ss->regs + HW_SSP_CTRL0); | 
 | 280 | 		stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); | 
 | 281 |  | 
 | 282 | 		if (write) | 
 | 283 | 			stmp3xxx_clearl(BM_SSP_CTRL0_READ, | 
 | 284 | 					ss->regs + HW_SSP_CTRL0); | 
 | 285 | 		else | 
 | 286 | 			stmp3xxx_setl(BM_SSP_CTRL0_READ, | 
 | 287 | 					ss->regs + HW_SSP_CTRL0); | 
 | 288 |  | 
 | 289 | 		/* Run! */ | 
 | 290 | 		stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); | 
 | 291 |  | 
 | 292 | 		if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & | 
 | 293 | 				BM_SSP_CTRL0_RUN)) | 
 | 294 | 			break; | 
 | 295 |  | 
 | 296 | 		if (write) | 
 | 297 | 			writel(*buf, ss->regs + HW_SSP_DATA); | 
 | 298 |  | 
 | 299 | 		/* Set TRANSFER */ | 
 | 300 | 		stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); | 
 | 301 |  | 
 | 302 | 		if (!write) { | 
 | 303 | 			if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & | 
 | 304 | 					BM_SSP_STATUS_FIFO_EMPTY))) | 
 | 305 | 				break; | 
 | 306 | 			*buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; | 
 | 307 | 		} | 
 | 308 |  | 
 | 309 | 		if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & | 
 | 310 | 					BM_SSP_CTRL0_RUN)) | 
 | 311 | 			break; | 
 | 312 |  | 
 | 313 | 		/* advance to the next byte */ | 
 | 314 | 		buf++; | 
 | 315 | 	} | 
 | 316 |  | 
 | 317 | 	return len < 0 ? 0 : -ETIMEDOUT; | 
 | 318 | } | 
 | 319 |  | 
 | 320 | static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) | 
 | 321 | { | 
 | 322 | 	bool first, last; | 
 | 323 | 	struct spi_transfer *t, *tmp_t; | 
 | 324 | 	int status = 0; | 
 | 325 | 	int cs; | 
 | 326 |  | 
 | 327 | 	cs = m->spi->chip_select; | 
 | 328 |  | 
 | 329 | 	list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { | 
 | 330 |  | 
 | 331 | 		first = (&t->transfer_list == m->transfers.next); | 
 | 332 | 		last = (&t->transfer_list == m->transfers.prev); | 
 | 333 |  | 
 | 334 | 		if (first || t->speed_hz || t->bits_per_word) | 
 | 335 | 			stmp_spi_setup_transfer(m->spi, t); | 
 | 336 |  | 
 | 337 | 		/* reject "not last" transfers which request to change cs */ | 
 | 338 | 		if (t->cs_change && !last) { | 
 | 339 | 			dev_err(&m->spi->dev, | 
 | 340 | 				"Message with t->cs_change has been skipped\n"); | 
 | 341 | 			continue; | 
 | 342 | 		} | 
 | 343 |  | 
 | 344 | 		if (t->tx_buf) { | 
 | 345 | 			status = pio ? | 
 | 346 | 			   stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, | 
 | 347 | 				   t->len, first, last, true) : | 
 | 348 | 			   stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, | 
 | 349 | 				   t->tx_dma, t->len, first, last, true); | 
 | 350 | #ifdef DEBUG | 
 | 351 | 			if (t->len < 0x10) | 
 | 352 | 				print_hex_dump_bytes("Tx ", | 
 | 353 | 					DUMP_PREFIX_OFFSET, | 
 | 354 | 					t->tx_buf, t->len); | 
 | 355 | 			else | 
 | 356 | 				pr_debug("Tx: %d bytes\n", t->len); | 
 | 357 | #endif | 
 | 358 | 		} | 
 | 359 | 		if (t->rx_buf) { | 
 | 360 | 			status = pio ? | 
 | 361 | 			   stmp_spi_txrx_pio(ss, cs, t->rx_buf, | 
 | 362 | 				   t->len, first, last, false) : | 
 | 363 | 			   stmp_spi_txrx_dma(ss, cs, t->rx_buf, | 
 | 364 | 				   t->rx_dma, t->len, first, last, false); | 
 | 365 | #ifdef DEBUG | 
 | 366 | 			if (t->len < 0x10) | 
 | 367 | 				print_hex_dump_bytes("Rx ", | 
 | 368 | 					DUMP_PREFIX_OFFSET, | 
 | 369 | 					t->rx_buf, t->len); | 
 | 370 | 			else | 
 | 371 | 				pr_debug("Rx: %d bytes\n", t->len); | 
 | 372 | #endif | 
 | 373 | 		} | 
 | 374 |  | 
 | 375 | 		if (t->delay_usecs) | 
 | 376 | 			udelay(t->delay_usecs); | 
 | 377 |  | 
 | 378 | 		if (status) | 
 | 379 | 			break; | 
 | 380 |  | 
 | 381 | 	} | 
 | 382 | 	return status; | 
 | 383 | } | 
 | 384 |  | 
 | 385 | /** | 
 | 386 |  * stmp_spi_handle - handle messages from the queue | 
 | 387 |  */ | 
 | 388 | static void stmp_spi_handle(struct work_struct *w) | 
 | 389 | { | 
 | 390 | 	struct stmp_spi *ss = container_of(w, struct stmp_spi, work); | 
 | 391 | 	unsigned long flags; | 
 | 392 | 	struct spi_message *m; | 
 | 393 |  | 
 | 394 | 	spin_lock_irqsave(&ss->lock, flags); | 
 | 395 | 	while (!list_empty(&ss->queue)) { | 
 | 396 | 		m = list_entry(ss->queue.next, struct spi_message, queue); | 
 | 397 | 		list_del_init(&m->queue); | 
 | 398 | 		spin_unlock_irqrestore(&ss->lock, flags); | 
 | 399 |  | 
 | 400 | 		m->status = stmp_spi_handle_message(ss, m); | 
 | 401 | 		m->complete(m->context); | 
 | 402 |  | 
 | 403 | 		spin_lock_irqsave(&ss->lock, flags); | 
 | 404 | 	} | 
 | 405 | 	spin_unlock_irqrestore(&ss->lock, flags); | 
 | 406 |  | 
 | 407 | 	return; | 
 | 408 | } | 
 | 409 |  | 
 | 410 | /** | 
 | 411 |  * stmp_spi_transfer - perform message transfer. | 
 | 412 |  * Called indirectly from spi_async, queues all the messages to | 
 | 413 |  * spi_handle_message. | 
 | 414 |  * @spi: spi device | 
 | 415 |  * @m: message to be queued | 
 | 416 |  */ | 
 | 417 | static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) | 
 | 418 | { | 
 | 419 | 	struct stmp_spi *ss = spi_master_get_devdata(spi->master); | 
 | 420 | 	unsigned long flags; | 
 | 421 |  | 
 | 422 | 	m->status = -EINPROGRESS; | 
 | 423 | 	spin_lock_irqsave(&ss->lock, flags); | 
 | 424 | 	list_add_tail(&m->queue, &ss->queue); | 
 | 425 | 	queue_work(ss->workqueue, &ss->work); | 
 | 426 | 	spin_unlock_irqrestore(&ss->lock, flags); | 
 | 427 | 	return 0; | 
 | 428 | } | 
 | 429 |  | 
 | 430 | static irqreturn_t stmp_spi_irq(int irq, void *dev_id) | 
 | 431 | { | 
 | 432 | 	struct stmp_spi *ss = dev_id; | 
 | 433 |  | 
 | 434 | 	stmp3xxx_dma_clear_interrupt(ss->dma); | 
 | 435 | 	complete(&ss->done); | 
 | 436 | 	return IRQ_HANDLED; | 
 | 437 | } | 
 | 438 |  | 
 | 439 | static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) | 
 | 440 | { | 
 | 441 | 	struct stmp_spi *ss = dev_id; | 
 | 442 | 	u32 c1, st; | 
 | 443 |  | 
 | 444 | 	c1 = readl(ss->regs + HW_SSP_CTRL1); | 
 | 445 | 	st = readl(ss->regs + HW_SSP_STATUS); | 
 | 446 | 	dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", | 
 | 447 | 		__func__, st, c1); | 
 | 448 | 	stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); | 
 | 449 |  | 
 | 450 | 	return IRQ_HANDLED; | 
 | 451 | } | 
 | 452 |  | 
 | 453 | static int __devinit stmp_spi_probe(struct platform_device *dev) | 
 | 454 | { | 
 | 455 | 	int err = 0; | 
 | 456 | 	struct spi_master *master; | 
 | 457 | 	struct stmp_spi *ss; | 
 | 458 | 	struct resource *r; | 
 | 459 |  | 
 | 460 | 	master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); | 
 | 461 | 	if (master == NULL) { | 
 | 462 | 		err = -ENOMEM; | 
 | 463 | 		goto out0; | 
 | 464 | 	} | 
 | 465 | 	master->flags = SPI_MASTER_HALF_DUPLEX; | 
 | 466 |  | 
 | 467 | 	ss = spi_master_get_devdata(master); | 
 | 468 | 	platform_set_drvdata(dev, master); | 
 | 469 |  | 
 | 470 | 	/* Get resources(memory, IRQ) associated with the device */ | 
 | 471 | 	r = platform_get_resource(dev, IORESOURCE_MEM, 0); | 
 | 472 | 	if (r == NULL) { | 
 | 473 | 		err = -ENODEV; | 
 | 474 | 		goto out_put_master; | 
 | 475 | 	} | 
 | 476 | 	ss->regs = ioremap(r->start, resource_size(r)); | 
 | 477 | 	if (!ss->regs) { | 
 | 478 | 		err = -EINVAL; | 
 | 479 | 		goto out_put_master; | 
 | 480 | 	} | 
 | 481 |  | 
 | 482 | 	ss->master_dev = &dev->dev; | 
 | 483 | 	ss->id = dev->id; | 
 | 484 |  | 
 | 485 | 	INIT_WORK(&ss->work, stmp_spi_handle); | 
 | 486 | 	INIT_LIST_HEAD(&ss->queue); | 
 | 487 | 	spin_lock_init(&ss->lock); | 
 | 488 |  | 
 | 489 | 	ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); | 
 | 490 | 	if (!ss->workqueue) { | 
 | 491 | 		err = -ENXIO; | 
 | 492 | 		goto out_put_master; | 
 | 493 | 	} | 
 | 494 | 	master->transfer = stmp_spi_transfer; | 
 | 495 | 	master->setup = stmp_spi_setup; | 
 | 496 |  | 
 | 497 | 	/* the spi->mode bits understood by this driver: */ | 
 | 498 | 	master->mode_bits = SPI_CPOL | SPI_CPHA; | 
 | 499 |  | 
 | 500 | 	ss->irq = platform_get_irq(dev, 0); | 
 | 501 | 	if (ss->irq < 0) { | 
 | 502 | 		err = ss->irq; | 
 | 503 | 		goto out_put_master; | 
 | 504 | 	} | 
 | 505 | 	ss->err_irq = platform_get_irq(dev, 1); | 
 | 506 | 	if (ss->err_irq < 0) { | 
 | 507 | 		err = ss->err_irq; | 
 | 508 | 		goto out_put_master; | 
 | 509 | 	} | 
 | 510 |  | 
 | 511 | 	r = platform_get_resource(dev, IORESOURCE_DMA, 0); | 
 | 512 | 	if (r == NULL) { | 
 | 513 | 		err = -ENODEV; | 
 | 514 | 		goto out_put_master; | 
 | 515 | 	} | 
 | 516 |  | 
 | 517 | 	ss->dma = r->start; | 
 | 518 | 	err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); | 
 | 519 | 	if (err) | 
 | 520 | 		goto out_put_master; | 
 | 521 |  | 
 | 522 | 	err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); | 
 | 523 | 	if (err) | 
 | 524 | 		goto out_free_dma; | 
 | 525 |  | 
 | 526 | 	master->bus_num = dev->id; | 
 | 527 | 	master->num_chipselect = 1; | 
 | 528 |  | 
 | 529 | 	/* SPI controller initializations */ | 
 | 530 | 	err = stmp_spi_init_hw(ss); | 
 | 531 | 	if (err) { | 
 | 532 | 		dev_dbg(&dev->dev, "cannot initialize hardware\n"); | 
 | 533 | 		goto out_free_dma_desc; | 
 | 534 | 	} | 
 | 535 |  | 
 | 536 | 	if (clock) { | 
 | 537 | 		dev_info(&dev->dev, "clock rate forced to %d\n", clock); | 
 | 538 | 		clk_set_rate(ss->clk, clock); | 
 | 539 | 	} | 
 | 540 | 	ss->speed_khz = clk_get_rate(ss->clk); | 
 | 541 | 	ss->divider = 2; | 
 | 542 | 	dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", | 
 | 543 | 		ss->speed_khz, clk_get_rate(ss->clk), ss->divider); | 
 | 544 |  | 
 | 545 | 	/* Register for SPI interrupt */ | 
 | 546 | 	err = request_irq(ss->irq, stmp_spi_irq, 0, | 
 | 547 | 			  dev_name(&dev->dev), ss); | 
 | 548 | 	if (err) { | 
 | 549 | 		dev_dbg(&dev->dev, "request_irq failed, %d\n", err); | 
 | 550 | 		goto out_release_hw; | 
 | 551 | 	} | 
 | 552 |  | 
 | 553 | 	/* ..and shared interrupt for all SSP controllers */ | 
 | 554 | 	err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, | 
 | 555 | 			  dev_name(&dev->dev), ss); | 
 | 556 | 	if (err) { | 
 | 557 | 		dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); | 
 | 558 | 		goto out_free_irq; | 
 | 559 | 	} | 
 | 560 |  | 
 | 561 | 	err = spi_register_master(master); | 
 | 562 | 	if (err) { | 
 | 563 | 		dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); | 
 | 564 | 		goto out_free_irq_2; | 
 | 565 | 	} | 
 | 566 | 	dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", | 
 | 567 | 			(u32)ss->regs, ss->irq, master->bus_num, | 
 | 568 | 			pio ? "PIO" : "DMA"); | 
 | 569 | 	return 0; | 
 | 570 |  | 
 | 571 | out_free_irq_2: | 
 | 572 | 	free_irq(ss->err_irq, ss); | 
 | 573 | out_free_irq: | 
 | 574 | 	free_irq(ss->irq, ss); | 
 | 575 | out_free_dma_desc: | 
 | 576 | 	stmp3xxx_dma_free_command(ss->dma, &ss->d); | 
 | 577 | out_free_dma: | 
 | 578 | 	stmp3xxx_dma_release(ss->dma); | 
 | 579 | out_release_hw: | 
 | 580 | 	stmp_spi_release_hw(ss); | 
 | 581 | out_put_master: | 
 | 582 | 	if (ss->workqueue) | 
 | 583 | 		destroy_workqueue(ss->workqueue); | 
 | 584 | 	if (ss->regs) | 
 | 585 | 		iounmap(ss->regs); | 
 | 586 | 	platform_set_drvdata(dev, NULL); | 
 | 587 | 	spi_master_put(master); | 
 | 588 | out0: | 
 | 589 | 	return err; | 
 | 590 | } | 
 | 591 |  | 
 | 592 | static int __devexit stmp_spi_remove(struct platform_device *dev) | 
 | 593 | { | 
 | 594 | 	struct stmp_spi *ss; | 
 | 595 | 	struct spi_master *master; | 
 | 596 |  | 
 | 597 | 	master = platform_get_drvdata(dev); | 
 | 598 | 	if (master == NULL) | 
 | 599 | 		goto out0; | 
 | 600 | 	ss = spi_master_get_devdata(master); | 
 | 601 |  | 
 | 602 | 	spi_unregister_master(master); | 
 | 603 |  | 
 | 604 | 	free_irq(ss->err_irq, ss); | 
 | 605 | 	free_irq(ss->irq, ss); | 
 | 606 | 	stmp3xxx_dma_free_command(ss->dma, &ss->d); | 
 | 607 | 	stmp3xxx_dma_release(ss->dma); | 
 | 608 | 	stmp_spi_release_hw(ss); | 
 | 609 | 	destroy_workqueue(ss->workqueue); | 
 | 610 | 	iounmap(ss->regs); | 
 | 611 | 	spi_master_put(master); | 
 | 612 | 	platform_set_drvdata(dev, NULL); | 
 | 613 | out0: | 
 | 614 | 	return 0; | 
 | 615 | } | 
 | 616 |  | 
 | 617 | #ifdef CONFIG_PM | 
 | 618 | static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) | 
 | 619 | { | 
 | 620 | 	struct stmp_spi *ss; | 
 | 621 | 	struct spi_master *master; | 
 | 622 |  | 
 | 623 | 	master = platform_get_drvdata(pdev); | 
 | 624 | 	ss = spi_master_get_devdata(master); | 
 | 625 |  | 
 | 626 | 	ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); | 
 | 627 | 	clk_disable(ss->clk); | 
 | 628 |  | 
 | 629 | 	return 0; | 
 | 630 | } | 
 | 631 |  | 
 | 632 | static int stmp_spi_resume(struct platform_device *pdev) | 
 | 633 | { | 
 | 634 | 	struct stmp_spi *ss; | 
 | 635 | 	struct spi_master *master; | 
 | 636 |  | 
 | 637 | 	master = platform_get_drvdata(pdev); | 
 | 638 | 	ss = spi_master_get_devdata(master); | 
 | 639 |  | 
 | 640 | 	clk_enable(ss->clk); | 
 | 641 | 	stmp3xxx_reset_block(ss->regs, false); | 
 | 642 | 	writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); | 
 | 643 |  | 
 | 644 | 	return 0; | 
 | 645 | } | 
 | 646 |  | 
 | 647 | #else | 
 | 648 | #define stmp_spi_suspend NULL | 
 | 649 | #define stmp_spi_resume  NULL | 
 | 650 | #endif | 
 | 651 |  | 
 | 652 | static struct platform_driver stmp_spi_driver = { | 
 | 653 | 	.probe	= stmp_spi_probe, | 
 | 654 | 	.remove	= __devexit_p(stmp_spi_remove), | 
 | 655 | 	.driver = { | 
 | 656 | 		.name = "stmp3xxx_ssp", | 
 | 657 | 		.owner = THIS_MODULE, | 
 | 658 | 	}, | 
 | 659 | 	.suspend = stmp_spi_suspend, | 
 | 660 | 	.resume  = stmp_spi_resume, | 
 | 661 | }; | 
 | 662 |  | 
 | 663 | static int __init stmp_spi_init(void) | 
 | 664 | { | 
 | 665 | 	return platform_driver_register(&stmp_spi_driver); | 
 | 666 | } | 
 | 667 |  | 
 | 668 | static void __exit stmp_spi_exit(void) | 
 | 669 | { | 
 | 670 | 	platform_driver_unregister(&stmp_spi_driver); | 
 | 671 | } | 
 | 672 |  | 
 | 673 | module_init(stmp_spi_init); | 
 | 674 | module_exit(stmp_spi_exit); | 
 | 675 | module_param(pio, int, S_IRUGO); | 
 | 676 | module_param(clock, int, S_IRUGO); | 
 | 677 | MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>"); | 
 | 678 | MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); | 
 | 679 | MODULE_LICENSE("GPL"); |