| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * Driver for high-speed SCC boards (those with DMA support) | 
|  | 3 | * Copyright (C) 1997-2000 Klaus Kudielka | 
|  | 4 | * | 
|  | 5 | * S5SCC/DMA support by Janko Koleznik S52HI | 
|  | 6 | * | 
|  | 7 | * This program is free software; you can redistribute it and/or modify | 
|  | 8 | * it under the terms of the GNU General Public License as published by | 
|  | 9 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 10 | * (at your option) any later version. | 
|  | 11 | * | 
|  | 12 | * This program is distributed in the hope that it will be useful, | 
|  | 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 15 | * GNU General Public License for more details. | 
|  | 16 | * | 
|  | 17 | * You should have received a copy of the GNU General Public License | 
|  | 18 | * along with this program; if not, write to the Free Software | 
|  | 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | 20 | */ | 
|  | 21 |  | 
|  | 22 |  | 
|  | 23 | #include <linux/module.h> | 
|  | 24 | #include <linux/delay.h> | 
|  | 25 | #include <linux/errno.h> | 
|  | 26 | #include <linux/if_arp.h> | 
|  | 27 | #include <linux/in.h> | 
|  | 28 | #include <linux/init.h> | 
|  | 29 | #include <linux/interrupt.h> | 
|  | 30 | #include <linux/ioport.h> | 
|  | 31 | #include <linux/kernel.h> | 
|  | 32 | #include <linux/mm.h> | 
|  | 33 | #include <linux/netdevice.h> | 
|  | 34 | #include <linux/rtnetlink.h> | 
|  | 35 | #include <linux/sockios.h> | 
|  | 36 | #include <linux/workqueue.h> | 
|  | 37 | #include <asm/atomic.h> | 
|  | 38 | #include <asm/bitops.h> | 
|  | 39 | #include <asm/dma.h> | 
|  | 40 | #include <asm/io.h> | 
|  | 41 | #include <asm/irq.h> | 
|  | 42 | #include <asm/uaccess.h> | 
|  | 43 | #include <net/ax25.h> | 
|  | 44 | #include "z8530.h" | 
|  | 45 |  | 
|  | 46 |  | 
|  | 47 | /* Number of buffers per channel */ | 
|  | 48 |  | 
|  | 49 | #define NUM_TX_BUF      2	/* NUM_TX_BUF >= 1 (min. 2 recommended) */ | 
|  | 50 | #define NUM_RX_BUF      6	/* NUM_RX_BUF >= 1 (min. 2 recommended) */ | 
|  | 51 | #define BUF_SIZE        1576	/* BUF_SIZE >= mtu + hard_header_len */ | 
|  | 52 |  | 
|  | 53 |  | 
|  | 54 | /* Cards supported */ | 
|  | 55 |  | 
|  | 56 | #define HW_PI           { "Ottawa PI", 0x300, 0x20, 0x10, 8, \ | 
|  | 57 | 0, 8, 1843200, 3686400 } | 
|  | 58 | #define HW_PI2          { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \ | 
|  | 59 | 0, 8, 3686400, 7372800 } | 
|  | 60 | #define HW_TWIN         { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \ | 
|  | 61 | 0, 4, 6144000, 6144000 } | 
|  | 62 | #define HW_S5           { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \ | 
|  | 63 | 0, 8, 4915200, 9830400 } | 
|  | 64 |  | 
|  | 65 | #define HARDWARE        { HW_PI, HW_PI2, HW_TWIN, HW_S5 } | 
|  | 66 |  | 
|  | 67 | #define TMR_0_HZ        25600	/* Frequency of timer 0 */ | 
|  | 68 |  | 
|  | 69 | #define TYPE_PI         0 | 
|  | 70 | #define TYPE_PI2        1 | 
|  | 71 | #define TYPE_TWIN       2 | 
|  | 72 | #define TYPE_S5         3 | 
|  | 73 | #define NUM_TYPES       4 | 
|  | 74 |  | 
|  | 75 | #define MAX_NUM_DEVS    32 | 
|  | 76 |  | 
|  | 77 |  | 
|  | 78 | /* SCC chips supported */ | 
|  | 79 |  | 
|  | 80 | #define Z8530           0 | 
|  | 81 | #define Z85C30          1 | 
|  | 82 | #define Z85230          2 | 
|  | 83 |  | 
|  | 84 | #define CHIPNAMES       { "Z8530", "Z85C30", "Z85230" } | 
|  | 85 |  | 
|  | 86 |  | 
|  | 87 | /* I/O registers */ | 
|  | 88 |  | 
|  | 89 | /* 8530 registers relative to card base */ | 
|  | 90 | #define SCCB_CMD        0x00 | 
|  | 91 | #define SCCB_DATA       0x01 | 
|  | 92 | #define SCCA_CMD        0x02 | 
|  | 93 | #define SCCA_DATA       0x03 | 
|  | 94 |  | 
|  | 95 | /* 8253/8254 registers relative to card base */ | 
|  | 96 | #define TMR_CNT0        0x00 | 
|  | 97 | #define TMR_CNT1        0x01 | 
|  | 98 | #define TMR_CNT2        0x02 | 
|  | 99 | #define TMR_CTRL        0x03 | 
|  | 100 |  | 
|  | 101 | /* Additional PI/PI2 registers relative to card base */ | 
|  | 102 | #define PI_DREQ_MASK    0x04 | 
|  | 103 |  | 
|  | 104 | /* Additional PackeTwin registers relative to card base */ | 
|  | 105 | #define TWIN_INT_REG    0x08 | 
|  | 106 | #define TWIN_CLR_TMR1   0x09 | 
|  | 107 | #define TWIN_CLR_TMR2   0x0a | 
|  | 108 | #define TWIN_SPARE_1    0x0b | 
|  | 109 | #define TWIN_DMA_CFG    0x08 | 
|  | 110 | #define TWIN_SERIAL_CFG 0x09 | 
|  | 111 | #define TWIN_DMA_CLR_FF 0x0a | 
|  | 112 | #define TWIN_SPARE_2    0x0b | 
|  | 113 |  | 
|  | 114 |  | 
|  | 115 | /* PackeTwin I/O register values */ | 
|  | 116 |  | 
|  | 117 | /* INT_REG */ | 
|  | 118 | #define TWIN_SCC_MSK       0x01 | 
|  | 119 | #define TWIN_TMR1_MSK      0x02 | 
|  | 120 | #define TWIN_TMR2_MSK      0x04 | 
|  | 121 | #define TWIN_INT_MSK       0x07 | 
|  | 122 |  | 
|  | 123 | /* SERIAL_CFG */ | 
|  | 124 | #define TWIN_DTRA_ON       0x01 | 
|  | 125 | #define TWIN_DTRB_ON       0x02 | 
|  | 126 | #define TWIN_EXTCLKA       0x04 | 
|  | 127 | #define TWIN_EXTCLKB       0x08 | 
|  | 128 | #define TWIN_LOOPA_ON      0x10 | 
|  | 129 | #define TWIN_LOOPB_ON      0x20 | 
|  | 130 | #define TWIN_EI            0x80 | 
|  | 131 |  | 
|  | 132 | /* DMA_CFG */ | 
|  | 133 | #define TWIN_DMA_HDX_T1    0x08 | 
|  | 134 | #define TWIN_DMA_HDX_R1    0x0a | 
|  | 135 | #define TWIN_DMA_HDX_T3    0x14 | 
|  | 136 | #define TWIN_DMA_HDX_R3    0x16 | 
|  | 137 | #define TWIN_DMA_FDX_T3R1  0x1b | 
|  | 138 | #define TWIN_DMA_FDX_T1R3  0x1d | 
|  | 139 |  | 
|  | 140 |  | 
|  | 141 | /* Status values */ | 
|  | 142 |  | 
|  | 143 | #define IDLE      0 | 
|  | 144 | #define TX_HEAD   1 | 
|  | 145 | #define TX_DATA   2 | 
|  | 146 | #define TX_PAUSE  3 | 
|  | 147 | #define TX_TAIL   4 | 
|  | 148 | #define RTS_OFF   5 | 
|  | 149 | #define WAIT      6 | 
|  | 150 | #define DCD_ON    7 | 
|  | 151 | #define RX_ON     8 | 
|  | 152 | #define DCD_OFF   9 | 
|  | 153 |  | 
|  | 154 |  | 
|  | 155 | /* Ioctls */ | 
|  | 156 |  | 
|  | 157 | #define SIOCGSCCPARAM SIOCDEVPRIVATE | 
|  | 158 | #define SIOCSSCCPARAM (SIOCDEVPRIVATE+1) | 
|  | 159 |  | 
|  | 160 |  | 
|  | 161 | /* Data types */ | 
|  | 162 |  | 
|  | 163 | struct scc_param { | 
|  | 164 | int pclk_hz;		/* frequency of BRG input (don't change) */ | 
|  | 165 | int brg_tc;		/* BRG terminal count; BRG disabled if < 0 */ | 
|  | 166 | int nrzi;		/* 0 (nrz), 1 (nrzi) */ | 
|  | 167 | int clocks;		/* see dmascc_cfg documentation */ | 
|  | 168 | int txdelay;		/* [1/TMR_0_HZ] */ | 
|  | 169 | int txtimeout;		/* [1/HZ] */ | 
|  | 170 | int txtail;		/* [1/TMR_0_HZ] */ | 
|  | 171 | int waittime;		/* [1/TMR_0_HZ] */ | 
|  | 172 | int slottime;		/* [1/TMR_0_HZ] */ | 
|  | 173 | int persist;		/* 1 ... 256 */ | 
|  | 174 | int dma;		/* -1 (disable), 0, 1, 3 */ | 
|  | 175 | int txpause;		/* [1/TMR_0_HZ] */ | 
|  | 176 | int rtsoff;		/* [1/TMR_0_HZ] */ | 
|  | 177 | int dcdon;		/* [1/TMR_0_HZ] */ | 
|  | 178 | int dcdoff;		/* [1/TMR_0_HZ] */ | 
|  | 179 | }; | 
|  | 180 |  | 
|  | 181 | struct scc_hardware { | 
|  | 182 | char *name; | 
|  | 183 | int io_region; | 
|  | 184 | int io_delta; | 
|  | 185 | int io_size; | 
|  | 186 | int num_devs; | 
|  | 187 | int scc_offset; | 
|  | 188 | int tmr_offset; | 
|  | 189 | int tmr_hz; | 
|  | 190 | int pclk_hz; | 
|  | 191 | }; | 
|  | 192 |  | 
|  | 193 | struct scc_priv { | 
|  | 194 | int type; | 
|  | 195 | int chip; | 
|  | 196 | struct net_device *dev; | 
|  | 197 | struct scc_info *info; | 
|  | 198 | struct net_device_stats stats; | 
|  | 199 | int channel; | 
|  | 200 | int card_base, scc_cmd, scc_data; | 
|  | 201 | int tmr_cnt, tmr_ctrl, tmr_mode; | 
|  | 202 | struct scc_param param; | 
|  | 203 | char rx_buf[NUM_RX_BUF][BUF_SIZE]; | 
|  | 204 | int rx_len[NUM_RX_BUF]; | 
|  | 205 | int rx_ptr; | 
|  | 206 | struct work_struct rx_work; | 
|  | 207 | int rx_head, rx_tail, rx_count; | 
|  | 208 | int rx_over; | 
|  | 209 | char tx_buf[NUM_TX_BUF][BUF_SIZE]; | 
|  | 210 | int tx_len[NUM_TX_BUF]; | 
|  | 211 | int tx_ptr; | 
|  | 212 | int tx_head, tx_tail, tx_count; | 
|  | 213 | int state; | 
|  | 214 | unsigned long tx_start; | 
|  | 215 | int rr0; | 
|  | 216 | spinlock_t *register_lock;	/* Per scc_info */ | 
|  | 217 | spinlock_t ring_lock; | 
|  | 218 | }; | 
|  | 219 |  | 
|  | 220 | struct scc_info { | 
|  | 221 | int irq_used; | 
|  | 222 | int twin_serial_cfg; | 
|  | 223 | struct net_device *dev[2]; | 
|  | 224 | struct scc_priv priv[2]; | 
|  | 225 | struct scc_info *next; | 
|  | 226 | spinlock_t register_lock;	/* Per device register lock */ | 
|  | 227 | }; | 
|  | 228 |  | 
|  | 229 |  | 
|  | 230 | /* Function declarations */ | 
|  | 231 | static int setup_adapter(int card_base, int type, int n) __init; | 
|  | 232 |  | 
|  | 233 | static void write_scc(struct scc_priv *priv, int reg, int val); | 
|  | 234 | static void write_scc_data(struct scc_priv *priv, int val, int fast); | 
|  | 235 | static int read_scc(struct scc_priv *priv, int reg); | 
|  | 236 | static int read_scc_data(struct scc_priv *priv); | 
|  | 237 |  | 
|  | 238 | static int scc_open(struct net_device *dev); | 
|  | 239 | static int scc_close(struct net_device *dev); | 
|  | 240 | static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); | 
|  | 241 | static int scc_send_packet(struct sk_buff *skb, struct net_device *dev); | 
|  | 242 | static struct net_device_stats *scc_get_stats(struct net_device *dev); | 
|  | 243 | static int scc_set_mac_address(struct net_device *dev, void *sa); | 
|  | 244 |  | 
|  | 245 | static inline void tx_on(struct scc_priv *priv); | 
|  | 246 | static inline void rx_on(struct scc_priv *priv); | 
|  | 247 | static inline void rx_off(struct scc_priv *priv); | 
|  | 248 | static void start_timer(struct scc_priv *priv, int t, int r15); | 
|  | 249 | static inline unsigned char random(void); | 
|  | 250 |  | 
|  | 251 | static inline void z8530_isr(struct scc_info *info); | 
|  | 252 | static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs); | 
|  | 253 | static void rx_isr(struct scc_priv *priv); | 
|  | 254 | static void special_condition(struct scc_priv *priv, int rc); | 
|  | 255 | static void rx_bh(void *arg); | 
|  | 256 | static void tx_isr(struct scc_priv *priv); | 
|  | 257 | static void es_isr(struct scc_priv *priv); | 
|  | 258 | static void tm_isr(struct scc_priv *priv); | 
|  | 259 |  | 
|  | 260 |  | 
|  | 261 | /* Initialization variables */ | 
|  | 262 |  | 
|  | 263 | static int io[MAX_NUM_DEVS] __initdata = { 0, }; | 
|  | 264 |  | 
|  | 265 | /* Beware! hw[] is also used in cleanup_module(). */ | 
|  | 266 | static struct scc_hardware hw[NUM_TYPES] __initdata_or_module = HARDWARE; | 
|  | 267 | static char ax25_broadcast[7] __initdata = | 
|  | 268 | { 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, | 
|  | 269 | '0' << 1 }; | 
|  | 270 | static char ax25_test[7] __initdata = | 
|  | 271 | { 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, | 
|  | 272 | '1' << 1 }; | 
|  | 273 |  | 
|  | 274 |  | 
|  | 275 | /* Global variables */ | 
|  | 276 |  | 
|  | 277 | static struct scc_info *first; | 
|  | 278 | static unsigned long rand; | 
|  | 279 |  | 
|  | 280 |  | 
|  | 281 | MODULE_AUTHOR("Klaus Kudielka"); | 
|  | 282 | MODULE_DESCRIPTION("Driver for high-speed SCC boards"); | 
|  | 283 | MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NUM_DEVS) "i"); | 
|  | 284 | MODULE_LICENSE("GPL"); | 
|  | 285 |  | 
|  | 286 | static void __exit dmascc_exit(void) | 
|  | 287 | { | 
|  | 288 | int i; | 
|  | 289 | struct scc_info *info; | 
|  | 290 |  | 
|  | 291 | while (first) { | 
|  | 292 | info = first; | 
|  | 293 |  | 
|  | 294 | /* Unregister devices */ | 
|  | 295 | for (i = 0; i < 2; i++) | 
|  | 296 | unregister_netdev(info->dev[i]); | 
|  | 297 |  | 
|  | 298 | /* Reset board */ | 
|  | 299 | if (info->priv[0].type == TYPE_TWIN) | 
|  | 300 | outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); | 
|  | 301 | write_scc(&info->priv[0], R9, FHWRES); | 
|  | 302 | release_region(info->dev[0]->base_addr, | 
|  | 303 | hw[info->priv[0].type].io_size); | 
|  | 304 |  | 
|  | 305 | for (i = 0; i < 2; i++) | 
|  | 306 | free_netdev(info->dev[i]); | 
|  | 307 |  | 
|  | 308 | /* Free memory */ | 
|  | 309 | first = info->next; | 
|  | 310 | kfree(info); | 
|  | 311 | } | 
|  | 312 | } | 
|  | 313 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 314 | static int __init dmascc_init(void) | 
|  | 315 | { | 
|  | 316 | int h, i, j, n; | 
|  | 317 | int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS], | 
|  | 318 | t1[MAX_NUM_DEVS]; | 
|  | 319 | unsigned t_val; | 
|  | 320 | unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS], | 
|  | 321 | counting[MAX_NUM_DEVS]; | 
|  | 322 |  | 
|  | 323 | /* Initialize random number generator */ | 
|  | 324 | rand = jiffies; | 
|  | 325 | /* Cards found = 0 */ | 
|  | 326 | n = 0; | 
|  | 327 | /* Warning message */ | 
|  | 328 | if (!io[0]) | 
|  | 329 | printk(KERN_INFO "dmascc: autoprobing (dangerous)\n"); | 
|  | 330 |  | 
|  | 331 | /* Run autodetection for each card type */ | 
|  | 332 | for (h = 0; h < NUM_TYPES; h++) { | 
|  | 333 |  | 
|  | 334 | if (io[0]) { | 
|  | 335 | /* User-specified I/O address regions */ | 
|  | 336 | for (i = 0; i < hw[h].num_devs; i++) | 
|  | 337 | base[i] = 0; | 
|  | 338 | for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) { | 
|  | 339 | j = (io[i] - | 
|  | 340 | hw[h].io_region) / hw[h].io_delta; | 
|  | 341 | if (j >= 0 && j < hw[h].num_devs | 
|  | 342 | && hw[h].io_region + | 
|  | 343 | j * hw[h].io_delta == io[i]) { | 
|  | 344 | base[j] = io[i]; | 
|  | 345 | } | 
|  | 346 | } | 
|  | 347 | } else { | 
|  | 348 | /* Default I/O address regions */ | 
|  | 349 | for (i = 0; i < hw[h].num_devs; i++) { | 
|  | 350 | base[i] = | 
|  | 351 | hw[h].io_region + i * hw[h].io_delta; | 
|  | 352 | } | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | /* Check valid I/O address regions */ | 
|  | 356 | for (i = 0; i < hw[h].num_devs; i++) | 
|  | 357 | if (base[i]) { | 
|  | 358 | if (!request_region | 
|  | 359 | (base[i], hw[h].io_size, "dmascc")) | 
|  | 360 | base[i] = 0; | 
|  | 361 | else { | 
|  | 362 | tcmd[i] = | 
|  | 363 | base[i] + hw[h].tmr_offset + | 
|  | 364 | TMR_CTRL; | 
|  | 365 | t0[i] = | 
|  | 366 | base[i] + hw[h].tmr_offset + | 
|  | 367 | TMR_CNT0; | 
|  | 368 | t1[i] = | 
|  | 369 | base[i] + hw[h].tmr_offset + | 
|  | 370 | TMR_CNT1; | 
|  | 371 | } | 
|  | 372 | } | 
|  | 373 |  | 
|  | 374 | /* Start timers */ | 
|  | 375 | for (i = 0; i < hw[h].num_devs; i++) | 
|  | 376 | if (base[i]) { | 
|  | 377 | /* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */ | 
|  | 378 | outb(0x36, tcmd[i]); | 
|  | 379 | outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF, | 
|  | 380 | t0[i]); | 
|  | 381 | outb((hw[h].tmr_hz / TMR_0_HZ) >> 8, | 
|  | 382 | t0[i]); | 
|  | 383 | /* Timer 1: LSB+MSB, Mode 0, HZ/10 */ | 
|  | 384 | outb(0x70, tcmd[i]); | 
|  | 385 | outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]); | 
|  | 386 | outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]); | 
|  | 387 | start[i] = jiffies; | 
|  | 388 | delay[i] = 0; | 
|  | 389 | counting[i] = 1; | 
|  | 390 | /* Timer 2: LSB+MSB, Mode 0 */ | 
|  | 391 | outb(0xb0, tcmd[i]); | 
|  | 392 | } | 
|  | 393 | time = jiffies; | 
|  | 394 | /* Wait until counter registers are loaded */ | 
|  | 395 | udelay(2000000 / TMR_0_HZ); | 
|  | 396 |  | 
|  | 397 | /* Timing loop */ | 
|  | 398 | while (jiffies - time < 13) { | 
|  | 399 | for (i = 0; i < hw[h].num_devs; i++) | 
|  | 400 | if (base[i] && counting[i]) { | 
|  | 401 | /* Read back Timer 1: latch; read LSB; read MSB */ | 
|  | 402 | outb(0x40, tcmd[i]); | 
|  | 403 | t_val = | 
|  | 404 | inb(t1[i]) + (inb(t1[i]) << 8); | 
|  | 405 | /* Also check whether counter did wrap */ | 
|  | 406 | if (t_val == 0 | 
|  | 407 | || t_val > TMR_0_HZ / HZ * 10) | 
|  | 408 | counting[i] = 0; | 
|  | 409 | delay[i] = jiffies - start[i]; | 
|  | 410 | } | 
|  | 411 | } | 
|  | 412 |  | 
|  | 413 | /* Evaluate measurements */ | 
|  | 414 | for (i = 0; i < hw[h].num_devs; i++) | 
|  | 415 | if (base[i]) { | 
|  | 416 | if ((delay[i] >= 9 && delay[i] <= 11) && | 
|  | 417 | /* Ok, we have found an adapter */ | 
|  | 418 | (setup_adapter(base[i], h, n) == 0)) | 
|  | 419 | n++; | 
|  | 420 | else | 
|  | 421 | release_region(base[i], | 
|  | 422 | hw[h].io_size); | 
|  | 423 | } | 
|  | 424 |  | 
|  | 425 | }			/* NUM_TYPES */ | 
|  | 426 |  | 
|  | 427 | /* If any adapter was successfully initialized, return ok */ | 
|  | 428 | if (n) | 
|  | 429 | return 0; | 
|  | 430 |  | 
|  | 431 | /* If no adapter found, return error */ | 
|  | 432 | printk(KERN_INFO "dmascc: no adapters found\n"); | 
|  | 433 | return -EIO; | 
|  | 434 | } | 
|  | 435 |  | 
|  | 436 | module_init(dmascc_init); | 
|  | 437 | module_exit(dmascc_exit); | 
|  | 438 |  | 
|  | 439 | static void dev_setup(struct net_device *dev) | 
|  | 440 | { | 
|  | 441 | dev->type = ARPHRD_AX25; | 
| Ralf Baechle | c4bc7ee | 2005-09-12 14:19:26 -0700 | [diff] [blame] | 442 | dev->hard_header_len = AX25_MAX_HEADER_LEN; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 443 | dev->mtu = 1500; | 
| Ralf Baechle | c4bc7ee | 2005-09-12 14:19:26 -0700 | [diff] [blame] | 444 | dev->addr_len = AX25_ADDR_LEN; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 445 | dev->tx_queue_len = 64; | 
| Ralf Baechle | c4bc7ee | 2005-09-12 14:19:26 -0700 | [diff] [blame] | 446 | memcpy(dev->broadcast, ax25_broadcast, AX25_ADDR_LEN); | 
|  | 447 | memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 448 | } | 
|  | 449 |  | 
|  | 450 | static int __init setup_adapter(int card_base, int type, int n) | 
|  | 451 | { | 
|  | 452 | int i, irq, chip; | 
|  | 453 | struct scc_info *info; | 
|  | 454 | struct net_device *dev; | 
|  | 455 | struct scc_priv *priv; | 
|  | 456 | unsigned long time; | 
|  | 457 | unsigned int irqs; | 
|  | 458 | int tmr_base = card_base + hw[type].tmr_offset; | 
|  | 459 | int scc_base = card_base + hw[type].scc_offset; | 
|  | 460 | char *chipnames[] = CHIPNAMES; | 
|  | 461 |  | 
|  | 462 | /* Allocate memory */ | 
|  | 463 | info = kmalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA); | 
|  | 464 | if (!info) { | 
|  | 465 | printk(KERN_ERR "dmascc: " | 
|  | 466 | "could not allocate memory for %s at %#3x\n", | 
|  | 467 | hw[type].name, card_base); | 
|  | 468 | goto out; | 
|  | 469 | } | 
|  | 470 |  | 
|  | 471 | /* Initialize what is necessary for write_scc and write_scc_data */ | 
|  | 472 | memset(info, 0, sizeof(struct scc_info)); | 
|  | 473 |  | 
|  | 474 | info->dev[0] = alloc_netdev(0, "", dev_setup); | 
|  | 475 | if (!info->dev[0]) { | 
|  | 476 | printk(KERN_ERR "dmascc: " | 
|  | 477 | "could not allocate memory for %s at %#3x\n", | 
|  | 478 | hw[type].name, card_base); | 
|  | 479 | goto out1; | 
|  | 480 | } | 
|  | 481 |  | 
|  | 482 | info->dev[1] = alloc_netdev(0, "", dev_setup); | 
|  | 483 | if (!info->dev[1]) { | 
|  | 484 | printk(KERN_ERR "dmascc: " | 
|  | 485 | "could not allocate memory for %s at %#3x\n", | 
|  | 486 | hw[type].name, card_base); | 
|  | 487 | goto out2; | 
|  | 488 | } | 
|  | 489 | spin_lock_init(&info->register_lock); | 
|  | 490 |  | 
|  | 491 | priv = &info->priv[0]; | 
|  | 492 | priv->type = type; | 
|  | 493 | priv->card_base = card_base; | 
|  | 494 | priv->scc_cmd = scc_base + SCCA_CMD; | 
|  | 495 | priv->scc_data = scc_base + SCCA_DATA; | 
|  | 496 | priv->register_lock = &info->register_lock; | 
|  | 497 |  | 
|  | 498 | /* Reset SCC */ | 
|  | 499 | write_scc(priv, R9, FHWRES | MIE | NV); | 
|  | 500 |  | 
|  | 501 | /* Determine type of chip by enabling SDLC/HDLC enhancements */ | 
|  | 502 | write_scc(priv, R15, SHDLCE); | 
|  | 503 | if (!read_scc(priv, R15)) { | 
|  | 504 | /* WR7' not present. This is an ordinary Z8530 SCC. */ | 
|  | 505 | chip = Z8530; | 
|  | 506 | } else { | 
|  | 507 | /* Put one character in TX FIFO */ | 
|  | 508 | write_scc_data(priv, 0, 0); | 
|  | 509 | if (read_scc(priv, R0) & Tx_BUF_EMP) { | 
|  | 510 | /* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */ | 
|  | 511 | chip = Z85230; | 
|  | 512 | } else { | 
|  | 513 | /* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */ | 
|  | 514 | chip = Z85C30; | 
|  | 515 | } | 
|  | 516 | } | 
|  | 517 | write_scc(priv, R15, 0); | 
|  | 518 |  | 
|  | 519 | /* Start IRQ auto-detection */ | 
|  | 520 | irqs = probe_irq_on(); | 
|  | 521 |  | 
|  | 522 | /* Enable interrupts */ | 
|  | 523 | if (type == TYPE_TWIN) { | 
|  | 524 | outb(0, card_base + TWIN_DMA_CFG); | 
|  | 525 | inb(card_base + TWIN_CLR_TMR1); | 
|  | 526 | inb(card_base + TWIN_CLR_TMR2); | 
|  | 527 | info->twin_serial_cfg = TWIN_EI; | 
|  | 528 | outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG); | 
|  | 529 | } else { | 
|  | 530 | write_scc(priv, R15, CTSIE); | 
|  | 531 | write_scc(priv, R0, RES_EXT_INT); | 
|  | 532 | write_scc(priv, R1, EXT_INT_ENAB); | 
|  | 533 | } | 
|  | 534 |  | 
|  | 535 | /* Start timer */ | 
|  | 536 | outb(1, tmr_base + TMR_CNT1); | 
|  | 537 | outb(0, tmr_base + TMR_CNT1); | 
|  | 538 |  | 
|  | 539 | /* Wait and detect IRQ */ | 
|  | 540 | time = jiffies; | 
|  | 541 | while (jiffies - time < 2 + HZ / TMR_0_HZ); | 
|  | 542 | irq = probe_irq_off(irqs); | 
|  | 543 |  | 
|  | 544 | /* Clear pending interrupt, disable interrupts */ | 
|  | 545 | if (type == TYPE_TWIN) { | 
|  | 546 | inb(card_base + TWIN_CLR_TMR1); | 
|  | 547 | } else { | 
|  | 548 | write_scc(priv, R1, 0); | 
|  | 549 | write_scc(priv, R15, 0); | 
|  | 550 | write_scc(priv, R0, RES_EXT_INT); | 
|  | 551 | } | 
|  | 552 |  | 
|  | 553 | if (irq <= 0) { | 
|  | 554 | printk(KERN_ERR | 
|  | 555 | "dmascc: could not find irq of %s at %#3x (irq=%d)\n", | 
|  | 556 | hw[type].name, card_base, irq); | 
|  | 557 | goto out3; | 
|  | 558 | } | 
|  | 559 |  | 
|  | 560 | /* Set up data structures */ | 
|  | 561 | for (i = 0; i < 2; i++) { | 
|  | 562 | dev = info->dev[i]; | 
|  | 563 | priv = &info->priv[i]; | 
|  | 564 | priv->type = type; | 
|  | 565 | priv->chip = chip; | 
|  | 566 | priv->dev = dev; | 
|  | 567 | priv->info = info; | 
|  | 568 | priv->channel = i; | 
|  | 569 | spin_lock_init(&priv->ring_lock); | 
|  | 570 | priv->register_lock = &info->register_lock; | 
|  | 571 | priv->card_base = card_base; | 
|  | 572 | priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD); | 
|  | 573 | priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA); | 
|  | 574 | priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1); | 
|  | 575 | priv->tmr_ctrl = tmr_base + TMR_CTRL; | 
|  | 576 | priv->tmr_mode = i ? 0xb0 : 0x70; | 
|  | 577 | priv->param.pclk_hz = hw[type].pclk_hz; | 
|  | 578 | priv->param.brg_tc = -1; | 
|  | 579 | priv->param.clocks = TCTRxCP | RCRTxCP; | 
|  | 580 | priv->param.persist = 256; | 
|  | 581 | priv->param.dma = -1; | 
|  | 582 | INIT_WORK(&priv->rx_work, rx_bh, priv); | 
|  | 583 | dev->priv = priv; | 
|  | 584 | sprintf(dev->name, "dmascc%i", 2 * n + i); | 
|  | 585 | SET_MODULE_OWNER(dev); | 
|  | 586 | dev->base_addr = card_base; | 
|  | 587 | dev->irq = irq; | 
|  | 588 | dev->open = scc_open; | 
|  | 589 | dev->stop = scc_close; | 
|  | 590 | dev->do_ioctl = scc_ioctl; | 
|  | 591 | dev->hard_start_xmit = scc_send_packet; | 
|  | 592 | dev->get_stats = scc_get_stats; | 
| Ralf Baechle | 6f74998 | 2005-09-12 14:21:01 -0700 | [diff] [blame] | 593 | dev->hard_header = ax25_hard_header; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 594 | dev->rebuild_header = ax25_rebuild_header; | 
|  | 595 | dev->set_mac_address = scc_set_mac_address; | 
|  | 596 | } | 
|  | 597 | if (register_netdev(info->dev[0])) { | 
|  | 598 | printk(KERN_ERR "dmascc: could not register %s\n", | 
|  | 599 | info->dev[0]->name); | 
|  | 600 | goto out3; | 
|  | 601 | } | 
|  | 602 | if (register_netdev(info->dev[1])) { | 
|  | 603 | printk(KERN_ERR "dmascc: could not register %s\n", | 
|  | 604 | info->dev[1]->name); | 
|  | 605 | goto out4; | 
|  | 606 | } | 
|  | 607 |  | 
|  | 608 |  | 
|  | 609 | info->next = first; | 
|  | 610 | first = info; | 
|  | 611 | printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n", | 
|  | 612 | hw[type].name, chipnames[chip], card_base, irq); | 
|  | 613 | return 0; | 
|  | 614 |  | 
|  | 615 | out4: | 
|  | 616 | unregister_netdev(info->dev[0]); | 
|  | 617 | out3: | 
|  | 618 | if (info->priv[0].type == TYPE_TWIN) | 
|  | 619 | outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); | 
|  | 620 | write_scc(&info->priv[0], R9, FHWRES); | 
|  | 621 | free_netdev(info->dev[1]); | 
|  | 622 | out2: | 
|  | 623 | free_netdev(info->dev[0]); | 
|  | 624 | out1: | 
|  | 625 | kfree(info); | 
|  | 626 | out: | 
|  | 627 | return -1; | 
|  | 628 | } | 
|  | 629 |  | 
|  | 630 |  | 
|  | 631 | /* Driver functions */ | 
|  | 632 |  | 
|  | 633 | static void write_scc(struct scc_priv *priv, int reg, int val) | 
|  | 634 | { | 
|  | 635 | unsigned long flags; | 
|  | 636 | switch (priv->type) { | 
|  | 637 | case TYPE_S5: | 
|  | 638 | if (reg) | 
|  | 639 | outb(reg, priv->scc_cmd); | 
|  | 640 | outb(val, priv->scc_cmd); | 
|  | 641 | return; | 
|  | 642 | case TYPE_TWIN: | 
|  | 643 | if (reg) | 
|  | 644 | outb_p(reg, priv->scc_cmd); | 
|  | 645 | outb_p(val, priv->scc_cmd); | 
|  | 646 | return; | 
|  | 647 | default: | 
|  | 648 | spin_lock_irqsave(priv->register_lock, flags); | 
|  | 649 | outb_p(0, priv->card_base + PI_DREQ_MASK); | 
|  | 650 | if (reg) | 
|  | 651 | outb_p(reg, priv->scc_cmd); | 
|  | 652 | outb_p(val, priv->scc_cmd); | 
|  | 653 | outb(1, priv->card_base + PI_DREQ_MASK); | 
|  | 654 | spin_unlock_irqrestore(priv->register_lock, flags); | 
|  | 655 | return; | 
|  | 656 | } | 
|  | 657 | } | 
|  | 658 |  | 
|  | 659 |  | 
|  | 660 | static void write_scc_data(struct scc_priv *priv, int val, int fast) | 
|  | 661 | { | 
|  | 662 | unsigned long flags; | 
|  | 663 | switch (priv->type) { | 
|  | 664 | case TYPE_S5: | 
|  | 665 | outb(val, priv->scc_data); | 
|  | 666 | return; | 
|  | 667 | case TYPE_TWIN: | 
|  | 668 | outb_p(val, priv->scc_data); | 
|  | 669 | return; | 
|  | 670 | default: | 
|  | 671 | if (fast) | 
|  | 672 | outb_p(val, priv->scc_data); | 
|  | 673 | else { | 
|  | 674 | spin_lock_irqsave(priv->register_lock, flags); | 
|  | 675 | outb_p(0, priv->card_base + PI_DREQ_MASK); | 
|  | 676 | outb_p(val, priv->scc_data); | 
|  | 677 | outb(1, priv->card_base + PI_DREQ_MASK); | 
|  | 678 | spin_unlock_irqrestore(priv->register_lock, flags); | 
|  | 679 | } | 
|  | 680 | return; | 
|  | 681 | } | 
|  | 682 | } | 
|  | 683 |  | 
|  | 684 |  | 
|  | 685 | static int read_scc(struct scc_priv *priv, int reg) | 
|  | 686 | { | 
|  | 687 | int rc; | 
|  | 688 | unsigned long flags; | 
|  | 689 | switch (priv->type) { | 
|  | 690 | case TYPE_S5: | 
|  | 691 | if (reg) | 
|  | 692 | outb(reg, priv->scc_cmd); | 
|  | 693 | return inb(priv->scc_cmd); | 
|  | 694 | case TYPE_TWIN: | 
|  | 695 | if (reg) | 
|  | 696 | outb_p(reg, priv->scc_cmd); | 
|  | 697 | return inb_p(priv->scc_cmd); | 
|  | 698 | default: | 
|  | 699 | spin_lock_irqsave(priv->register_lock, flags); | 
|  | 700 | outb_p(0, priv->card_base + PI_DREQ_MASK); | 
|  | 701 | if (reg) | 
|  | 702 | outb_p(reg, priv->scc_cmd); | 
|  | 703 | rc = inb_p(priv->scc_cmd); | 
|  | 704 | outb(1, priv->card_base + PI_DREQ_MASK); | 
|  | 705 | spin_unlock_irqrestore(priv->register_lock, flags); | 
|  | 706 | return rc; | 
|  | 707 | } | 
|  | 708 | } | 
|  | 709 |  | 
|  | 710 |  | 
|  | 711 | static int read_scc_data(struct scc_priv *priv) | 
|  | 712 | { | 
|  | 713 | int rc; | 
|  | 714 | unsigned long flags; | 
|  | 715 | switch (priv->type) { | 
|  | 716 | case TYPE_S5: | 
|  | 717 | return inb(priv->scc_data); | 
|  | 718 | case TYPE_TWIN: | 
|  | 719 | return inb_p(priv->scc_data); | 
|  | 720 | default: | 
|  | 721 | spin_lock_irqsave(priv->register_lock, flags); | 
|  | 722 | outb_p(0, priv->card_base + PI_DREQ_MASK); | 
|  | 723 | rc = inb_p(priv->scc_data); | 
|  | 724 | outb(1, priv->card_base + PI_DREQ_MASK); | 
|  | 725 | spin_unlock_irqrestore(priv->register_lock, flags); | 
|  | 726 | return rc; | 
|  | 727 | } | 
|  | 728 | } | 
|  | 729 |  | 
|  | 730 |  | 
|  | 731 | static int scc_open(struct net_device *dev) | 
|  | 732 | { | 
|  | 733 | struct scc_priv *priv = dev->priv; | 
|  | 734 | struct scc_info *info = priv->info; | 
|  | 735 | int card_base = priv->card_base; | 
|  | 736 |  | 
|  | 737 | /* Request IRQ if not already used by other channel */ | 
|  | 738 | if (!info->irq_used) { | 
|  | 739 | if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) { | 
|  | 740 | return -EAGAIN; | 
|  | 741 | } | 
|  | 742 | } | 
|  | 743 | info->irq_used++; | 
|  | 744 |  | 
|  | 745 | /* Request DMA if required */ | 
|  | 746 | if (priv->param.dma >= 0) { | 
|  | 747 | if (request_dma(priv->param.dma, "dmascc")) { | 
|  | 748 | if (--info->irq_used == 0) | 
|  | 749 | free_irq(dev->irq, info); | 
|  | 750 | return -EAGAIN; | 
|  | 751 | } else { | 
|  | 752 | unsigned long flags = claim_dma_lock(); | 
|  | 753 | clear_dma_ff(priv->param.dma); | 
|  | 754 | release_dma_lock(flags); | 
|  | 755 | } | 
|  | 756 | } | 
|  | 757 |  | 
|  | 758 | /* Initialize local variables */ | 
|  | 759 | priv->rx_ptr = 0; | 
|  | 760 | priv->rx_over = 0; | 
|  | 761 | priv->rx_head = priv->rx_tail = priv->rx_count = 0; | 
|  | 762 | priv->state = IDLE; | 
|  | 763 | priv->tx_head = priv->tx_tail = priv->tx_count = 0; | 
|  | 764 | priv->tx_ptr = 0; | 
|  | 765 |  | 
|  | 766 | /* Reset channel */ | 
|  | 767 | write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); | 
|  | 768 | /* X1 clock, SDLC mode */ | 
|  | 769 | write_scc(priv, R4, SDLC | X1CLK); | 
|  | 770 | /* DMA */ | 
|  | 771 | write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); | 
|  | 772 | /* 8 bit RX char, RX disable */ | 
|  | 773 | write_scc(priv, R3, Rx8); | 
|  | 774 | /* 8 bit TX char, TX disable */ | 
|  | 775 | write_scc(priv, R5, Tx8); | 
|  | 776 | /* SDLC address field */ | 
|  | 777 | write_scc(priv, R6, 0); | 
|  | 778 | /* SDLC flag */ | 
|  | 779 | write_scc(priv, R7, FLAG); | 
|  | 780 | switch (priv->chip) { | 
|  | 781 | case Z85C30: | 
|  | 782 | /* Select WR7' */ | 
|  | 783 | write_scc(priv, R15, SHDLCE); | 
|  | 784 | /* Auto EOM reset */ | 
|  | 785 | write_scc(priv, R7, AUTOEOM); | 
|  | 786 | write_scc(priv, R15, 0); | 
|  | 787 | break; | 
|  | 788 | case Z85230: | 
|  | 789 | /* Select WR7' */ | 
|  | 790 | write_scc(priv, R15, SHDLCE); | 
|  | 791 | /* The following bits are set (see 2.5.2.1): | 
|  | 792 | - Automatic EOM reset | 
|  | 793 | - Interrupt request if RX FIFO is half full | 
|  | 794 | This bit should be ignored in DMA mode (according to the | 
|  | 795 | documentation), but actually isn't. The receiver doesn't work if | 
|  | 796 | it is set. Thus, we have to clear it in DMA mode. | 
|  | 797 | - Interrupt/DMA request if TX FIFO is completely empty | 
|  | 798 | a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30 | 
|  | 799 | compatibility). | 
|  | 800 | b) If cleared, DMA requests may follow each other very quickly, | 
|  | 801 | filling up the TX FIFO. | 
|  | 802 | Advantage: TX works even in case of high bus latency. | 
|  | 803 | Disadvantage: Edge-triggered DMA request circuitry may miss | 
|  | 804 | a request. No more data is delivered, resulting | 
|  | 805 | in a TX FIFO underrun. | 
|  | 806 | Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared. | 
|  | 807 | The PackeTwin doesn't. I don't know about the PI, but let's | 
|  | 808 | assume it behaves like the PI2. | 
|  | 809 | */ | 
|  | 810 | if (priv->param.dma >= 0) { | 
|  | 811 | if (priv->type == TYPE_TWIN) | 
|  | 812 | write_scc(priv, R7, AUTOEOM | TXFIFOE); | 
|  | 813 | else | 
|  | 814 | write_scc(priv, R7, AUTOEOM); | 
|  | 815 | } else { | 
|  | 816 | write_scc(priv, R7, AUTOEOM | RXFIFOH); | 
|  | 817 | } | 
|  | 818 | write_scc(priv, R15, 0); | 
|  | 819 | break; | 
|  | 820 | } | 
|  | 821 | /* Preset CRC, NRZ(I) encoding */ | 
|  | 822 | write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ)); | 
|  | 823 |  | 
|  | 824 | /* Configure baud rate generator */ | 
|  | 825 | if (priv->param.brg_tc >= 0) { | 
|  | 826 | /* Program BR generator */ | 
|  | 827 | write_scc(priv, R12, priv->param.brg_tc & 0xFF); | 
|  | 828 | write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF); | 
|  | 829 | /* BRG source = SYS CLK; enable BRG; DTR REQ function (required by | 
|  | 830 | PackeTwin, not connected on the PI2); set DPLL source to BRG */ | 
|  | 831 | write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL); | 
|  | 832 | /* Enable DPLL */ | 
|  | 833 | write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL); | 
|  | 834 | } else { | 
|  | 835 | /* Disable BR generator */ | 
|  | 836 | write_scc(priv, R14, DTRREQ | BRSRC); | 
|  | 837 | } | 
|  | 838 |  | 
|  | 839 | /* Configure clocks */ | 
|  | 840 | if (priv->type == TYPE_TWIN) { | 
|  | 841 | /* Disable external TX clock receiver */ | 
|  | 842 | outb((info->twin_serial_cfg &= | 
|  | 843 | ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), | 
|  | 844 | card_base + TWIN_SERIAL_CFG); | 
|  | 845 | } | 
|  | 846 | write_scc(priv, R11, priv->param.clocks); | 
|  | 847 | if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) { | 
|  | 848 | /* Enable external TX clock receiver */ | 
|  | 849 | outb((info->twin_serial_cfg |= | 
|  | 850 | (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), | 
|  | 851 | card_base + TWIN_SERIAL_CFG); | 
|  | 852 | } | 
|  | 853 |  | 
|  | 854 | /* Configure PackeTwin */ | 
|  | 855 | if (priv->type == TYPE_TWIN) { | 
|  | 856 | /* Assert DTR, enable interrupts */ | 
|  | 857 | outb((info->twin_serial_cfg |= TWIN_EI | | 
|  | 858 | (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)), | 
|  | 859 | card_base + TWIN_SERIAL_CFG); | 
|  | 860 | } | 
|  | 861 |  | 
|  | 862 | /* Read current status */ | 
|  | 863 | priv->rr0 = read_scc(priv, R0); | 
|  | 864 | /* Enable DCD interrupt */ | 
|  | 865 | write_scc(priv, R15, DCDIE); | 
|  | 866 |  | 
|  | 867 | netif_start_queue(dev); | 
|  | 868 |  | 
|  | 869 | return 0; | 
|  | 870 | } | 
|  | 871 |  | 
|  | 872 |  | 
|  | 873 | static int scc_close(struct net_device *dev) | 
|  | 874 | { | 
|  | 875 | struct scc_priv *priv = dev->priv; | 
|  | 876 | struct scc_info *info = priv->info; | 
|  | 877 | int card_base = priv->card_base; | 
|  | 878 |  | 
|  | 879 | netif_stop_queue(dev); | 
|  | 880 |  | 
|  | 881 | if (priv->type == TYPE_TWIN) { | 
|  | 882 | /* Drop DTR */ | 
|  | 883 | outb((info->twin_serial_cfg &= | 
|  | 884 | (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)), | 
|  | 885 | card_base + TWIN_SERIAL_CFG); | 
|  | 886 | } | 
|  | 887 |  | 
|  | 888 | /* Reset channel, free DMA and IRQ */ | 
|  | 889 | write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); | 
|  | 890 | if (priv->param.dma >= 0) { | 
|  | 891 | if (priv->type == TYPE_TWIN) | 
|  | 892 | outb(0, card_base + TWIN_DMA_CFG); | 
|  | 893 | free_dma(priv->param.dma); | 
|  | 894 | } | 
|  | 895 | if (--info->irq_used == 0) | 
|  | 896 | free_irq(dev->irq, info); | 
|  | 897 |  | 
|  | 898 | return 0; | 
|  | 899 | } | 
|  | 900 |  | 
|  | 901 |  | 
|  | 902 | static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | 
|  | 903 | { | 
|  | 904 | struct scc_priv *priv = dev->priv; | 
|  | 905 |  | 
|  | 906 | switch (cmd) { | 
|  | 907 | case SIOCGSCCPARAM: | 
|  | 908 | if (copy_to_user | 
|  | 909 | (ifr->ifr_data, &priv->param, | 
|  | 910 | sizeof(struct scc_param))) | 
|  | 911 | return -EFAULT; | 
|  | 912 | return 0; | 
|  | 913 | case SIOCSSCCPARAM: | 
|  | 914 | if (!capable(CAP_NET_ADMIN)) | 
|  | 915 | return -EPERM; | 
|  | 916 | if (netif_running(dev)) | 
|  | 917 | return -EAGAIN; | 
|  | 918 | if (copy_from_user | 
|  | 919 | (&priv->param, ifr->ifr_data, | 
|  | 920 | sizeof(struct scc_param))) | 
|  | 921 | return -EFAULT; | 
|  | 922 | return 0; | 
|  | 923 | default: | 
|  | 924 | return -EINVAL; | 
|  | 925 | } | 
|  | 926 | } | 
|  | 927 |  | 
|  | 928 |  | 
|  | 929 | static int scc_send_packet(struct sk_buff *skb, struct net_device *dev) | 
|  | 930 | { | 
|  | 931 | struct scc_priv *priv = dev->priv; | 
|  | 932 | unsigned long flags; | 
|  | 933 | int i; | 
|  | 934 |  | 
|  | 935 | /* Temporarily stop the scheduler feeding us packets */ | 
|  | 936 | netif_stop_queue(dev); | 
|  | 937 |  | 
|  | 938 | /* Transfer data to DMA buffer */ | 
|  | 939 | i = priv->tx_head; | 
|  | 940 | memcpy(priv->tx_buf[i], skb->data + 1, skb->len - 1); | 
|  | 941 | priv->tx_len[i] = skb->len - 1; | 
|  | 942 |  | 
|  | 943 | /* Clear interrupts while we touch our circular buffers */ | 
|  | 944 |  | 
|  | 945 | spin_lock_irqsave(&priv->ring_lock, flags); | 
|  | 946 | /* Move the ring buffer's head */ | 
|  | 947 | priv->tx_head = (i + 1) % NUM_TX_BUF; | 
|  | 948 | priv->tx_count++; | 
|  | 949 |  | 
|  | 950 | /* If we just filled up the last buffer, leave queue stopped. | 
|  | 951 | The higher layers must wait until we have a DMA buffer | 
|  | 952 | to accept the data. */ | 
|  | 953 | if (priv->tx_count < NUM_TX_BUF) | 
|  | 954 | netif_wake_queue(dev); | 
|  | 955 |  | 
|  | 956 | /* Set new TX state */ | 
|  | 957 | if (priv->state == IDLE) { | 
|  | 958 | /* Assert RTS, start timer */ | 
|  | 959 | priv->state = TX_HEAD; | 
|  | 960 | priv->tx_start = jiffies; | 
|  | 961 | write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8); | 
|  | 962 | write_scc(priv, R15, 0); | 
|  | 963 | start_timer(priv, priv->param.txdelay, 0); | 
|  | 964 | } | 
|  | 965 |  | 
|  | 966 | /* Turn interrupts back on and free buffer */ | 
|  | 967 | spin_unlock_irqrestore(&priv->ring_lock, flags); | 
|  | 968 | dev_kfree_skb(skb); | 
|  | 969 |  | 
|  | 970 | return 0; | 
|  | 971 | } | 
|  | 972 |  | 
|  | 973 |  | 
|  | 974 | static struct net_device_stats *scc_get_stats(struct net_device *dev) | 
|  | 975 | { | 
|  | 976 | struct scc_priv *priv = dev->priv; | 
|  | 977 |  | 
|  | 978 | return &priv->stats; | 
|  | 979 | } | 
|  | 980 |  | 
|  | 981 |  | 
|  | 982 | static int scc_set_mac_address(struct net_device *dev, void *sa) | 
|  | 983 | { | 
|  | 984 | memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data, | 
|  | 985 | dev->addr_len); | 
|  | 986 | return 0; | 
|  | 987 | } | 
|  | 988 |  | 
|  | 989 |  | 
|  | 990 | static inline void tx_on(struct scc_priv *priv) | 
|  | 991 | { | 
|  | 992 | int i, n; | 
|  | 993 | unsigned long flags; | 
|  | 994 |  | 
|  | 995 | if (priv->param.dma >= 0) { | 
|  | 996 | n = (priv->chip == Z85230) ? 3 : 1; | 
|  | 997 | /* Program DMA controller */ | 
|  | 998 | flags = claim_dma_lock(); | 
|  | 999 | set_dma_mode(priv->param.dma, DMA_MODE_WRITE); | 
|  | 1000 | set_dma_addr(priv->param.dma, | 
|  | 1001 | (int) priv->tx_buf[priv->tx_tail] + n); | 
|  | 1002 | set_dma_count(priv->param.dma, | 
|  | 1003 | priv->tx_len[priv->tx_tail] - n); | 
|  | 1004 | release_dma_lock(flags); | 
|  | 1005 | /* Enable TX underrun interrupt */ | 
|  | 1006 | write_scc(priv, R15, TxUIE); | 
|  | 1007 | /* Configure DREQ */ | 
|  | 1008 | if (priv->type == TYPE_TWIN) | 
|  | 1009 | outb((priv->param.dma == | 
|  | 1010 | 1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3, | 
|  | 1011 | priv->card_base + TWIN_DMA_CFG); | 
|  | 1012 | else | 
|  | 1013 | write_scc(priv, R1, | 
|  | 1014 | EXT_INT_ENAB | WT_FN_RDYFN | | 
|  | 1015 | WT_RDY_ENAB); | 
|  | 1016 | /* Write first byte(s) */ | 
|  | 1017 | spin_lock_irqsave(priv->register_lock, flags); | 
|  | 1018 | for (i = 0; i < n; i++) | 
|  | 1019 | write_scc_data(priv, | 
|  | 1020 | priv->tx_buf[priv->tx_tail][i], 1); | 
|  | 1021 | enable_dma(priv->param.dma); | 
|  | 1022 | spin_unlock_irqrestore(priv->register_lock, flags); | 
|  | 1023 | } else { | 
|  | 1024 | write_scc(priv, R15, TxUIE); | 
|  | 1025 | write_scc(priv, R1, | 
|  | 1026 | EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB); | 
|  | 1027 | tx_isr(priv); | 
|  | 1028 | } | 
|  | 1029 | /* Reset EOM latch if we do not have the AUTOEOM feature */ | 
|  | 1030 | if (priv->chip == Z8530) | 
|  | 1031 | write_scc(priv, R0, RES_EOM_L); | 
|  | 1032 | } | 
|  | 1033 |  | 
|  | 1034 |  | 
|  | 1035 | static inline void rx_on(struct scc_priv *priv) | 
|  | 1036 | { | 
|  | 1037 | unsigned long flags; | 
|  | 1038 |  | 
|  | 1039 | /* Clear RX FIFO */ | 
|  | 1040 | while (read_scc(priv, R0) & Rx_CH_AV) | 
|  | 1041 | read_scc_data(priv); | 
|  | 1042 | priv->rx_over = 0; | 
|  | 1043 | if (priv->param.dma >= 0) { | 
|  | 1044 | /* Program DMA controller */ | 
|  | 1045 | flags = claim_dma_lock(); | 
|  | 1046 | set_dma_mode(priv->param.dma, DMA_MODE_READ); | 
|  | 1047 | set_dma_addr(priv->param.dma, | 
|  | 1048 | (int) priv->rx_buf[priv->rx_head]); | 
|  | 1049 | set_dma_count(priv->param.dma, BUF_SIZE); | 
|  | 1050 | release_dma_lock(flags); | 
|  | 1051 | enable_dma(priv->param.dma); | 
|  | 1052 | /* Configure PackeTwin DMA */ | 
|  | 1053 | if (priv->type == TYPE_TWIN) { | 
|  | 1054 | outb((priv->param.dma == | 
|  | 1055 | 1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3, | 
|  | 1056 | priv->card_base + TWIN_DMA_CFG); | 
|  | 1057 | } | 
|  | 1058 | /* Sp. cond. intr. only, ext int enable, RX DMA enable */ | 
|  | 1059 | write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx | | 
|  | 1060 | WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB); | 
|  | 1061 | } else { | 
|  | 1062 | /* Reset current frame */ | 
|  | 1063 | priv->rx_ptr = 0; | 
|  | 1064 | /* Intr. on all Rx characters and Sp. cond., ext int enable */ | 
|  | 1065 | write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT | | 
|  | 1066 | WT_FN_RDYFN); | 
|  | 1067 | } | 
|  | 1068 | write_scc(priv, R0, ERR_RES); | 
|  | 1069 | write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB); | 
|  | 1070 | } | 
|  | 1071 |  | 
|  | 1072 |  | 
|  | 1073 | static inline void rx_off(struct scc_priv *priv) | 
|  | 1074 | { | 
|  | 1075 | /* Disable receiver */ | 
|  | 1076 | write_scc(priv, R3, Rx8); | 
|  | 1077 | /* Disable DREQ / RX interrupt */ | 
|  | 1078 | if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) | 
|  | 1079 | outb(0, priv->card_base + TWIN_DMA_CFG); | 
|  | 1080 | else | 
|  | 1081 | write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); | 
|  | 1082 | /* Disable DMA */ | 
|  | 1083 | if (priv->param.dma >= 0) | 
|  | 1084 | disable_dma(priv->param.dma); | 
|  | 1085 | } | 
|  | 1086 |  | 
|  | 1087 |  | 
|  | 1088 | static void start_timer(struct scc_priv *priv, int t, int r15) | 
|  | 1089 | { | 
|  | 1090 | unsigned long flags; | 
|  | 1091 |  | 
|  | 1092 | outb(priv->tmr_mode, priv->tmr_ctrl); | 
|  | 1093 | if (t == 0) { | 
|  | 1094 | tm_isr(priv); | 
|  | 1095 | } else if (t > 0) { | 
|  | 1096 | save_flags(flags); | 
|  | 1097 | cli(); | 
|  | 1098 | outb(t & 0xFF, priv->tmr_cnt); | 
|  | 1099 | outb((t >> 8) & 0xFF, priv->tmr_cnt); | 
|  | 1100 | if (priv->type != TYPE_TWIN) { | 
|  | 1101 | write_scc(priv, R15, r15 | CTSIE); | 
|  | 1102 | priv->rr0 |= CTS; | 
|  | 1103 | } | 
|  | 1104 | restore_flags(flags); | 
|  | 1105 | } | 
|  | 1106 | } | 
|  | 1107 |  | 
|  | 1108 |  | 
|  | 1109 | static inline unsigned char random(void) | 
|  | 1110 | { | 
|  | 1111 | /* See "Numerical Recipes in C", second edition, p. 284 */ | 
|  | 1112 | rand = rand * 1664525L + 1013904223L; | 
|  | 1113 | return (unsigned char) (rand >> 24); | 
|  | 1114 | } | 
|  | 1115 |  | 
|  | 1116 | static inline void z8530_isr(struct scc_info *info) | 
|  | 1117 | { | 
|  | 1118 | int is, i = 100; | 
|  | 1119 |  | 
|  | 1120 | while ((is = read_scc(&info->priv[0], R3)) && i--) { | 
|  | 1121 | if (is & CHARxIP) { | 
|  | 1122 | rx_isr(&info->priv[0]); | 
|  | 1123 | } else if (is & CHATxIP) { | 
|  | 1124 | tx_isr(&info->priv[0]); | 
|  | 1125 | } else if (is & CHAEXT) { | 
|  | 1126 | es_isr(&info->priv[0]); | 
|  | 1127 | } else if (is & CHBRxIP) { | 
|  | 1128 | rx_isr(&info->priv[1]); | 
|  | 1129 | } else if (is & CHBTxIP) { | 
|  | 1130 | tx_isr(&info->priv[1]); | 
|  | 1131 | } else { | 
|  | 1132 | es_isr(&info->priv[1]); | 
|  | 1133 | } | 
|  | 1134 | write_scc(&info->priv[0], R0, RES_H_IUS); | 
|  | 1135 | i++; | 
|  | 1136 | } | 
|  | 1137 | if (i < 0) { | 
|  | 1138 | printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n", | 
|  | 1139 | is); | 
|  | 1140 | } | 
|  | 1141 | /* Ok, no interrupts pending from this 8530. The INT line should | 
|  | 1142 | be inactive now. */ | 
|  | 1143 | } | 
|  | 1144 |  | 
|  | 1145 |  | 
|  | 1146 | static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs) | 
|  | 1147 | { | 
|  | 1148 | struct scc_info *info = dev_id; | 
|  | 1149 |  | 
|  | 1150 | spin_lock(info->priv[0].register_lock); | 
|  | 1151 | /* At this point interrupts are enabled, and the interrupt under service | 
|  | 1152 | is already acknowledged, but masked off. | 
|  | 1153 |  | 
|  | 1154 | Interrupt processing: We loop until we know that the IRQ line is | 
|  | 1155 | low. If another positive edge occurs afterwards during the ISR, | 
|  | 1156 | another interrupt will be triggered by the interrupt controller | 
|  | 1157 | as soon as the IRQ level is enabled again (see asm/irq.h). | 
|  | 1158 |  | 
|  | 1159 | Bottom-half handlers will be processed after scc_isr(). This is | 
|  | 1160 | important, since we only have small ringbuffers and want new data | 
|  | 1161 | to be fetched/delivered immediately. */ | 
|  | 1162 |  | 
|  | 1163 | if (info->priv[0].type == TYPE_TWIN) { | 
|  | 1164 | int is, card_base = info->priv[0].card_base; | 
|  | 1165 | while ((is = ~inb(card_base + TWIN_INT_REG)) & | 
|  | 1166 | TWIN_INT_MSK) { | 
|  | 1167 | if (is & TWIN_SCC_MSK) { | 
|  | 1168 | z8530_isr(info); | 
|  | 1169 | } else if (is & TWIN_TMR1_MSK) { | 
|  | 1170 | inb(card_base + TWIN_CLR_TMR1); | 
|  | 1171 | tm_isr(&info->priv[0]); | 
|  | 1172 | } else { | 
|  | 1173 | inb(card_base + TWIN_CLR_TMR2); | 
|  | 1174 | tm_isr(&info->priv[1]); | 
|  | 1175 | } | 
|  | 1176 | } | 
|  | 1177 | } else | 
|  | 1178 | z8530_isr(info); | 
|  | 1179 | spin_unlock(info->priv[0].register_lock); | 
|  | 1180 | return IRQ_HANDLED; | 
|  | 1181 | } | 
|  | 1182 |  | 
|  | 1183 |  | 
|  | 1184 | static void rx_isr(struct scc_priv *priv) | 
|  | 1185 | { | 
|  | 1186 | if (priv->param.dma >= 0) { | 
|  | 1187 | /* Check special condition and perform error reset. See 2.4.7.5. */ | 
|  | 1188 | special_condition(priv, read_scc(priv, R1)); | 
|  | 1189 | write_scc(priv, R0, ERR_RES); | 
|  | 1190 | } else { | 
|  | 1191 | /* Check special condition for each character. Error reset not necessary. | 
|  | 1192 | Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */ | 
|  | 1193 | int rc; | 
|  | 1194 | while (read_scc(priv, R0) & Rx_CH_AV) { | 
|  | 1195 | rc = read_scc(priv, R1); | 
|  | 1196 | if (priv->rx_ptr < BUF_SIZE) | 
|  | 1197 | priv->rx_buf[priv->rx_head][priv-> | 
|  | 1198 | rx_ptr++] = | 
|  | 1199 | read_scc_data(priv); | 
|  | 1200 | else { | 
|  | 1201 | priv->rx_over = 2; | 
|  | 1202 | read_scc_data(priv); | 
|  | 1203 | } | 
|  | 1204 | special_condition(priv, rc); | 
|  | 1205 | } | 
|  | 1206 | } | 
|  | 1207 | } | 
|  | 1208 |  | 
|  | 1209 |  | 
|  | 1210 | static void special_condition(struct scc_priv *priv, int rc) | 
|  | 1211 | { | 
|  | 1212 | int cb; | 
|  | 1213 | unsigned long flags; | 
|  | 1214 |  | 
|  | 1215 | /* See Figure 2-15. Only overrun and EOF need to be checked. */ | 
|  | 1216 |  | 
|  | 1217 | if (rc & Rx_OVR) { | 
|  | 1218 | /* Receiver overrun */ | 
|  | 1219 | priv->rx_over = 1; | 
|  | 1220 | if (priv->param.dma < 0) | 
|  | 1221 | write_scc(priv, R0, ERR_RES); | 
|  | 1222 | } else if (rc & END_FR) { | 
|  | 1223 | /* End of frame. Get byte count */ | 
|  | 1224 | if (priv->param.dma >= 0) { | 
|  | 1225 | flags = claim_dma_lock(); | 
|  | 1226 | cb = BUF_SIZE - get_dma_residue(priv->param.dma) - | 
|  | 1227 | 2; | 
|  | 1228 | release_dma_lock(flags); | 
|  | 1229 | } else { | 
|  | 1230 | cb = priv->rx_ptr - 2; | 
|  | 1231 | } | 
|  | 1232 | if (priv->rx_over) { | 
|  | 1233 | /* We had an overrun */ | 
|  | 1234 | priv->stats.rx_errors++; | 
|  | 1235 | if (priv->rx_over == 2) | 
|  | 1236 | priv->stats.rx_length_errors++; | 
|  | 1237 | else | 
|  | 1238 | priv->stats.rx_fifo_errors++; | 
|  | 1239 | priv->rx_over = 0; | 
|  | 1240 | } else if (rc & CRC_ERR) { | 
|  | 1241 | /* Count invalid CRC only if packet length >= minimum */ | 
|  | 1242 | if (cb >= 15) { | 
|  | 1243 | priv->stats.rx_errors++; | 
|  | 1244 | priv->stats.rx_crc_errors++; | 
|  | 1245 | } | 
|  | 1246 | } else { | 
|  | 1247 | if (cb >= 15) { | 
|  | 1248 | if (priv->rx_count < NUM_RX_BUF - 1) { | 
|  | 1249 | /* Put good frame in FIFO */ | 
|  | 1250 | priv->rx_len[priv->rx_head] = cb; | 
|  | 1251 | priv->rx_head = | 
|  | 1252 | (priv->rx_head + | 
|  | 1253 | 1) % NUM_RX_BUF; | 
|  | 1254 | priv->rx_count++; | 
|  | 1255 | schedule_work(&priv->rx_work); | 
|  | 1256 | } else { | 
|  | 1257 | priv->stats.rx_errors++; | 
|  | 1258 | priv->stats.rx_over_errors++; | 
|  | 1259 | } | 
|  | 1260 | } | 
|  | 1261 | } | 
|  | 1262 | /* Get ready for new frame */ | 
|  | 1263 | if (priv->param.dma >= 0) { | 
|  | 1264 | flags = claim_dma_lock(); | 
|  | 1265 | set_dma_addr(priv->param.dma, | 
|  | 1266 | (int) priv->rx_buf[priv->rx_head]); | 
|  | 1267 | set_dma_count(priv->param.dma, BUF_SIZE); | 
|  | 1268 | release_dma_lock(flags); | 
|  | 1269 | } else { | 
|  | 1270 | priv->rx_ptr = 0; | 
|  | 1271 | } | 
|  | 1272 | } | 
|  | 1273 | } | 
|  | 1274 |  | 
|  | 1275 |  | 
|  | 1276 | static void rx_bh(void *arg) | 
|  | 1277 | { | 
|  | 1278 | struct scc_priv *priv = arg; | 
|  | 1279 | int i = priv->rx_tail; | 
|  | 1280 | int cb; | 
|  | 1281 | unsigned long flags; | 
|  | 1282 | struct sk_buff *skb; | 
|  | 1283 | unsigned char *data; | 
|  | 1284 |  | 
|  | 1285 | spin_lock_irqsave(&priv->ring_lock, flags); | 
|  | 1286 | while (priv->rx_count) { | 
|  | 1287 | spin_unlock_irqrestore(&priv->ring_lock, flags); | 
|  | 1288 | cb = priv->rx_len[i]; | 
|  | 1289 | /* Allocate buffer */ | 
|  | 1290 | skb = dev_alloc_skb(cb + 1); | 
|  | 1291 | if (skb == NULL) { | 
|  | 1292 | /* Drop packet */ | 
|  | 1293 | priv->stats.rx_dropped++; | 
|  | 1294 | } else { | 
|  | 1295 | /* Fill buffer */ | 
|  | 1296 | data = skb_put(skb, cb + 1); | 
|  | 1297 | data[0] = 0; | 
|  | 1298 | memcpy(&data[1], priv->rx_buf[i], cb); | 
| Arnaldo Carvalho de Melo | 56cb515 | 2005-04-24 18:53:06 -0700 | [diff] [blame] | 1299 | skb->protocol = ax25_type_trans(skb, priv->dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1300 | netif_rx(skb); | 
|  | 1301 | priv->dev->last_rx = jiffies; | 
|  | 1302 | priv->stats.rx_packets++; | 
|  | 1303 | priv->stats.rx_bytes += cb; | 
|  | 1304 | } | 
|  | 1305 | spin_lock_irqsave(&priv->ring_lock, flags); | 
|  | 1306 | /* Move tail */ | 
|  | 1307 | priv->rx_tail = i = (i + 1) % NUM_RX_BUF; | 
|  | 1308 | priv->rx_count--; | 
|  | 1309 | } | 
|  | 1310 | spin_unlock_irqrestore(&priv->ring_lock, flags); | 
|  | 1311 | } | 
|  | 1312 |  | 
|  | 1313 |  | 
|  | 1314 | static void tx_isr(struct scc_priv *priv) | 
|  | 1315 | { | 
|  | 1316 | int i = priv->tx_tail, p = priv->tx_ptr; | 
|  | 1317 |  | 
|  | 1318 | /* Suspend TX interrupts if we don't want to send anything. | 
|  | 1319 | See Figure 2-22. */ | 
|  | 1320 | if (p == priv->tx_len[i]) { | 
|  | 1321 | write_scc(priv, R0, RES_Tx_P); | 
|  | 1322 | return; | 
|  | 1323 | } | 
|  | 1324 |  | 
|  | 1325 | /* Write characters */ | 
|  | 1326 | while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) { | 
|  | 1327 | write_scc_data(priv, priv->tx_buf[i][p++], 0); | 
|  | 1328 | } | 
|  | 1329 |  | 
|  | 1330 | /* Reset EOM latch of Z8530 */ | 
|  | 1331 | if (!priv->tx_ptr && p && priv->chip == Z8530) | 
|  | 1332 | write_scc(priv, R0, RES_EOM_L); | 
|  | 1333 |  | 
|  | 1334 | priv->tx_ptr = p; | 
|  | 1335 | } | 
|  | 1336 |  | 
|  | 1337 |  | 
|  | 1338 | static void es_isr(struct scc_priv *priv) | 
|  | 1339 | { | 
|  | 1340 | int i, rr0, drr0, res; | 
|  | 1341 | unsigned long flags; | 
|  | 1342 |  | 
|  | 1343 | /* Read status, reset interrupt bit (open latches) */ | 
|  | 1344 | rr0 = read_scc(priv, R0); | 
|  | 1345 | write_scc(priv, R0, RES_EXT_INT); | 
|  | 1346 | drr0 = priv->rr0 ^ rr0; | 
|  | 1347 | priv->rr0 = rr0; | 
|  | 1348 |  | 
|  | 1349 | /* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since | 
|  | 1350 | it might have already been cleared again by AUTOEOM. */ | 
|  | 1351 | if (priv->state == TX_DATA) { | 
|  | 1352 | /* Get remaining bytes */ | 
|  | 1353 | i = priv->tx_tail; | 
|  | 1354 | if (priv->param.dma >= 0) { | 
|  | 1355 | disable_dma(priv->param.dma); | 
|  | 1356 | flags = claim_dma_lock(); | 
|  | 1357 | res = get_dma_residue(priv->param.dma); | 
|  | 1358 | release_dma_lock(flags); | 
|  | 1359 | } else { | 
|  | 1360 | res = priv->tx_len[i] - priv->tx_ptr; | 
|  | 1361 | priv->tx_ptr = 0; | 
|  | 1362 | } | 
|  | 1363 | /* Disable DREQ / TX interrupt */ | 
|  | 1364 | if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) | 
|  | 1365 | outb(0, priv->card_base + TWIN_DMA_CFG); | 
|  | 1366 | else | 
|  | 1367 | write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); | 
|  | 1368 | if (res) { | 
|  | 1369 | /* Update packet statistics */ | 
|  | 1370 | priv->stats.tx_errors++; | 
|  | 1371 | priv->stats.tx_fifo_errors++; | 
|  | 1372 | /* Other underrun interrupts may already be waiting */ | 
|  | 1373 | write_scc(priv, R0, RES_EXT_INT); | 
|  | 1374 | write_scc(priv, R0, RES_EXT_INT); | 
|  | 1375 | } else { | 
|  | 1376 | /* Update packet statistics */ | 
|  | 1377 | priv->stats.tx_packets++; | 
|  | 1378 | priv->stats.tx_bytes += priv->tx_len[i]; | 
|  | 1379 | /* Remove frame from FIFO */ | 
|  | 1380 | priv->tx_tail = (i + 1) % NUM_TX_BUF; | 
|  | 1381 | priv->tx_count--; | 
|  | 1382 | /* Inform upper layers */ | 
|  | 1383 | netif_wake_queue(priv->dev); | 
|  | 1384 | } | 
|  | 1385 | /* Switch state */ | 
|  | 1386 | write_scc(priv, R15, 0); | 
|  | 1387 | if (priv->tx_count && | 
|  | 1388 | (jiffies - priv->tx_start) < priv->param.txtimeout) { | 
|  | 1389 | priv->state = TX_PAUSE; | 
|  | 1390 | start_timer(priv, priv->param.txpause, 0); | 
|  | 1391 | } else { | 
|  | 1392 | priv->state = TX_TAIL; | 
|  | 1393 | start_timer(priv, priv->param.txtail, 0); | 
|  | 1394 | } | 
|  | 1395 | } | 
|  | 1396 |  | 
|  | 1397 | /* DCD transition */ | 
|  | 1398 | if (drr0 & DCD) { | 
|  | 1399 | if (rr0 & DCD) { | 
|  | 1400 | switch (priv->state) { | 
|  | 1401 | case IDLE: | 
|  | 1402 | case WAIT: | 
|  | 1403 | priv->state = DCD_ON; | 
|  | 1404 | write_scc(priv, R15, 0); | 
|  | 1405 | start_timer(priv, priv->param.dcdon, 0); | 
|  | 1406 | } | 
|  | 1407 | } else { | 
|  | 1408 | switch (priv->state) { | 
|  | 1409 | case RX_ON: | 
|  | 1410 | rx_off(priv); | 
|  | 1411 | priv->state = DCD_OFF; | 
|  | 1412 | write_scc(priv, R15, 0); | 
|  | 1413 | start_timer(priv, priv->param.dcdoff, 0); | 
|  | 1414 | } | 
|  | 1415 | } | 
|  | 1416 | } | 
|  | 1417 |  | 
|  | 1418 | /* CTS transition */ | 
|  | 1419 | if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN) | 
|  | 1420 | tm_isr(priv); | 
|  | 1421 |  | 
|  | 1422 | } | 
|  | 1423 |  | 
|  | 1424 |  | 
|  | 1425 | static void tm_isr(struct scc_priv *priv) | 
|  | 1426 | { | 
|  | 1427 | switch (priv->state) { | 
|  | 1428 | case TX_HEAD: | 
|  | 1429 | case TX_PAUSE: | 
|  | 1430 | tx_on(priv); | 
|  | 1431 | priv->state = TX_DATA; | 
|  | 1432 | break; | 
|  | 1433 | case TX_TAIL: | 
|  | 1434 | write_scc(priv, R5, TxCRC_ENAB | Tx8); | 
|  | 1435 | priv->state = RTS_OFF; | 
|  | 1436 | if (priv->type != TYPE_TWIN) | 
|  | 1437 | write_scc(priv, R15, 0); | 
|  | 1438 | start_timer(priv, priv->param.rtsoff, 0); | 
|  | 1439 | break; | 
|  | 1440 | case RTS_OFF: | 
|  | 1441 | write_scc(priv, R15, DCDIE); | 
|  | 1442 | priv->rr0 = read_scc(priv, R0); | 
|  | 1443 | if (priv->rr0 & DCD) { | 
|  | 1444 | priv->stats.collisions++; | 
|  | 1445 | rx_on(priv); | 
|  | 1446 | priv->state = RX_ON; | 
|  | 1447 | } else { | 
|  | 1448 | priv->state = WAIT; | 
|  | 1449 | start_timer(priv, priv->param.waittime, DCDIE); | 
|  | 1450 | } | 
|  | 1451 | break; | 
|  | 1452 | case WAIT: | 
|  | 1453 | if (priv->tx_count) { | 
|  | 1454 | priv->state = TX_HEAD; | 
|  | 1455 | priv->tx_start = jiffies; | 
|  | 1456 | write_scc(priv, R5, | 
|  | 1457 | TxCRC_ENAB | RTS | TxENAB | Tx8); | 
|  | 1458 | write_scc(priv, R15, 0); | 
|  | 1459 | start_timer(priv, priv->param.txdelay, 0); | 
|  | 1460 | } else { | 
|  | 1461 | priv->state = IDLE; | 
|  | 1462 | if (priv->type != TYPE_TWIN) | 
|  | 1463 | write_scc(priv, R15, DCDIE); | 
|  | 1464 | } | 
|  | 1465 | break; | 
|  | 1466 | case DCD_ON: | 
|  | 1467 | case DCD_OFF: | 
|  | 1468 | write_scc(priv, R15, DCDIE); | 
|  | 1469 | priv->rr0 = read_scc(priv, R0); | 
|  | 1470 | if (priv->rr0 & DCD) { | 
|  | 1471 | rx_on(priv); | 
|  | 1472 | priv->state = RX_ON; | 
|  | 1473 | } else { | 
|  | 1474 | priv->state = WAIT; | 
|  | 1475 | start_timer(priv, | 
|  | 1476 | random() / priv->param.persist * | 
|  | 1477 | priv->param.slottime, DCDIE); | 
|  | 1478 | } | 
|  | 1479 | break; | 
|  | 1480 | } | 
|  | 1481 | } |