Gitiles
Code Review Sign In
review.evervolv.com / android_kernel_htc_msm8960 / 1b7fcd3263e5f12dba43d27b64e1578bec070c28 / . / drivers / hwmon / lm93.c
blob: fc36cadf36fb257d17bafe065a2dc68805ea686e [file] [log] [blame]
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]1/*
2 lm93.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
3
4 Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com>
5 Copyright (c) 2004 Utilitek Systems, Inc.
6
7 derived in part from lm78.c:
8 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
9
10 derived in part from lm85.c:
11 Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
12 Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
13
14 derived in part from w83l785ts.c:
15 Copyright (c) 2003-2004 Jean Delvare <khali@linux-fr.org>
16
17 Ported to Linux 2.6 by Eric J. Bowersox <ericb@aspsys.com>
18 Copyright (c) 2005 Aspen Systems, Inc.
19
20 Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
21 Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
22
23 Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
24 Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
25
26 This program is free software; you can redistribute it and/or modify
27 it under the terms of the GNU General Public License as published by
28 the Free Software Foundation; either version 2 of the License, or
29 (at your option) any later version.
30
31 This program is distributed in the hope that it will be useful,
32 but WITHOUT ANY WARRANTY; without even the implied warranty of
33 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
34 GNU General Public License for more details.
35
36 You should have received a copy of the GNU General Public License
37 along with this program; if not, write to the Free Software
38 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
39*/
40
41#include <linux/module.h>
42#include <linux/init.h>
43#include <linux/slab.h>
44#include <linux/i2c.h>
45#include <linux/hwmon.h>
46#include <linux/hwmon-sysfs.h>
47#include <linux/hwmon-vid.h>
48#include <linux/err.h>
49#include <linux/delay.h>
50
51/* LM93 REGISTER ADDRESSES */
52
53/* miscellaneous */
54#define LM93_REG_MFR_ID 0x3e
55#define LM93_REG_VER 0x3f
56#define LM93_REG_STATUS_CONTROL 0xe2
57#define LM93_REG_CONFIG 0xe3
58#define LM93_REG_SLEEP_CONTROL 0xe4
59
60/* alarm values start here */
61#define LM93_REG_HOST_ERROR_1 0x48
62
63/* voltage inputs: in1-in16 (nr => 0-15) */
64#define LM93_REG_IN(nr) (0x56 + (nr))
65#define LM93_REG_IN_MIN(nr) (0x90 + (nr) * 2)
66#define LM93_REG_IN_MAX(nr) (0x91 + (nr) * 2)
67
68/* temperature inputs: temp1-temp4 (nr => 0-3) */
69#define LM93_REG_TEMP(nr) (0x50 + (nr))
70#define LM93_REG_TEMP_MIN(nr) (0x78 + (nr) * 2)
71#define LM93_REG_TEMP_MAX(nr) (0x79 + (nr) * 2)
72
73/* temp[1-4]_auto_boost (nr => 0-3) */
74#define LM93_REG_BOOST(nr) (0x80 + (nr))
75
76/* #PROCHOT inputs: prochot1-prochot2 (nr => 0-1) */
77#define LM93_REG_PROCHOT_CUR(nr) (0x67 + (nr) * 2)
78#define LM93_REG_PROCHOT_AVG(nr) (0x68 + (nr) * 2)
79#define LM93_REG_PROCHOT_MAX(nr) (0xb0 + (nr))
80
81/* fan tach inputs: fan1-fan4 (nr => 0-3) */
82#define LM93_REG_FAN(nr) (0x6e + (nr) * 2)
83#define LM93_REG_FAN_MIN(nr) (0xb4 + (nr) * 2)
84
85/* pwm outputs: pwm1-pwm2 (nr => 0-1, reg => 0-3) */
86#define LM93_REG_PWM_CTL(nr,reg) (0xc8 + (reg) + (nr) * 4)
87#define LM93_PWM_CTL1 0x0
88#define LM93_PWM_CTL2 0x1
89#define LM93_PWM_CTL3 0x2
90#define LM93_PWM_CTL4 0x3
91
92/* GPIO input state */
93#define LM93_REG_GPI 0x6b
94
95/* vid inputs: vid1-vid2 (nr => 0-1) */
96#define LM93_REG_VID(nr) (0x6c + (nr))
97
98/* vccp1 & vccp2: VID relative inputs (nr => 0-1) */
99#define LM93_REG_VCCP_LIMIT_OFF(nr) (0xb2 + (nr))
100
101/* temp[1-4]_auto_boost_hyst */
102#define LM93_REG_BOOST_HYST_12 0xc0
103#define LM93_REG_BOOST_HYST_34 0xc1
104#define LM93_REG_BOOST_HYST(nr) (0xc0 + (nr)/2)
105
106/* temp[1-4]_auto_pwm_[min|hyst] */
107#define LM93_REG_PWM_MIN_HYST_12 0xc3
108#define LM93_REG_PWM_MIN_HYST_34 0xc4
109#define LM93_REG_PWM_MIN_HYST(nr) (0xc3 + (nr)/2)
110
111/* prochot_override & prochot_interval */
112#define LM93_REG_PROCHOT_OVERRIDE 0xc6
113#define LM93_REG_PROCHOT_INTERVAL 0xc7
114
115/* temp[1-4]_auto_base (nr => 0-3) */
116#define LM93_REG_TEMP_BASE(nr) (0xd0 + (nr))
117
118/* temp[1-4]_auto_offsets (step => 0-11) */
119#define LM93_REG_TEMP_OFFSET(step) (0xd4 + (step))
120
121/* #PROCHOT & #VRDHOT PWM ramp control */
122#define LM93_REG_PWM_RAMP_CTL 0xbf
123
124/* miscellaneous */
125#define LM93_REG_SFC1 0xbc
126#define LM93_REG_SFC2 0xbd
127#define LM93_REG_GPI_VID_CTL 0xbe
128#define LM93_REG_SF_TACH_TO_PWM 0xe0
129
130/* error masks */
131#define LM93_REG_GPI_ERR_MASK 0xec
132#define LM93_REG_MISC_ERR_MASK 0xed
133
134/* LM93 REGISTER VALUES */
135#define LM93_MFR_ID 0x73
136#define LM93_MFR_ID_PROTOTYPE 0x72
137
138/* SMBus capabilities */
139#define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \
140 I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA)
141#define LM93_SMBUS_FUNC_MIN (I2C_FUNC_SMBUS_BYTE_DATA | \
142 I2C_FUNC_SMBUS_WORD_DATA)
143
144/* Addresses to scan */
Mark M. Hoffman25e9c862008-02-17 22:28:03 -0500[diff] [blame]145static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]146
147/* Insmod parameters */
148I2C_CLIENT_INSMOD_1(lm93);
149
150static int disable_block;
151module_param(disable_block, bool, 0);
152MODULE_PARM_DESC(disable_block,
153 "Set to non-zero to disable SMBus block data transactions.");
154
155static int init;
156module_param(init, bool, 0);
157MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization.");
158
159static int vccp_limit_type[2] = {0,0};
160module_param_array(vccp_limit_type, int, NULL, 0);
161MODULE_PARM_DESC(vccp_limit_type, "Configures in7 and in8 limit modes.");
162
163static int vid_agtl;
164module_param(vid_agtl, int, 0);
165MODULE_PARM_DESC(vid_agtl, "Configures VID pin input thresholds.");
166
167/* Driver data */
168static struct i2c_driver lm93_driver;
169
170/* LM93 BLOCK READ COMMANDS */
171static const struct { u8 cmd; u8 len; } lm93_block_read_cmds[12] = {
172 { 0xf2, 8 },
173 { 0xf3, 8 },
174 { 0xf4, 6 },
175 { 0xf5, 16 },
176 { 0xf6, 4 },
177 { 0xf7, 8 },
178 { 0xf8, 12 },
179 { 0xf9, 32 },
180 { 0xfa, 8 },
181 { 0xfb, 8 },
182 { 0xfc, 16 },
183 { 0xfd, 9 },
184};
185
186/* ALARMS: SYSCTL format described further below
187 REG: 64 bits in 8 registers, as immediately below */
188struct block1_t {
189 u8 host_status_1;
190 u8 host_status_2;
191 u8 host_status_3;
192 u8 host_status_4;
193 u8 p1_prochot_status;
194 u8 p2_prochot_status;
195 u8 gpi_status;
196 u8 fan_status;
197};
198
199/*
200 * Client-specific data
201 */
202struct lm93_data {
Tony Jones1beeffe2007-08-20 13:46:20 -0700[diff] [blame]203 struct device *hwmon_dev;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]204
205 struct mutex update_lock;
206 unsigned long last_updated; /* In jiffies */
207
208 /* client update function */
209 void (*update)(struct lm93_data *, struct i2c_client *);
210
211 char valid; /* !=0 if following fields are valid */
212
213 /* register values, arranged by block read groups */
214 struct block1_t block1;
215
216 /* temp1 - temp4: unfiltered readings
217 temp1 - temp2: filtered readings */
218 u8 block2[6];
219
220 /* vin1 - vin16: readings */
221 u8 block3[16];
222
223 /* prochot1 - prochot2: readings */
224 struct {
225 u8 cur;
226 u8 avg;
227 } block4[2];
228
229 /* fan counts 1-4 => 14-bits, LE, *left* justified */
230 u16 block5[4];
231
232 /* block6 has a lot of data we don't need */
233 struct {
234 u8 min;
235 u8 max;
Hans-Jürgen Kochf08a3482007-07-23 09:36:57 +0200[diff] [blame]236 } temp_lim[4];
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]237
238 /* vin1 - vin16: low and high limits */
239 struct {
240 u8 min;
241 u8 max;
242 } block7[16];
243
244 /* fan count limits 1-4 => same format as block5 */
245 u16 block8[4];
246
247 /* pwm control registers (2 pwms, 4 regs) */
248 u8 block9[2][4];
249
250 /* auto/pwm base temp and offset temp registers */
251 struct {
252 u8 base[4];
253 u8 offset[12];
254 } block10;
255
256 /* master config register */
257 u8 config;
258
259 /* VID1 & VID2 => register format, 6-bits, right justified */
260 u8 vid[2];
261
262 /* prochot1 - prochot2: limits */
263 u8 prochot_max[2];
264
265 /* vccp1 & vccp2 (in7 & in8): VID relative limits (register format) */
266 u8 vccp_limits[2];
267
268 /* GPIO input state (register format, i.e. inverted) */
269 u8 gpi;
270
271 /* #PROCHOT override (register format) */
272 u8 prochot_override;
273
274 /* #PROCHOT intervals (register format) */
275 u8 prochot_interval;
276
277 /* Fan Boost Temperatures (register format) */
278 u8 boost[4];
279
280 /* Fan Boost Hysteresis (register format) */
281 u8 boost_hyst[2];
282
283 /* Temperature Zone Min. PWM & Hysteresis (register format) */
284 u8 auto_pwm_min_hyst[2];
285
286 /* #PROCHOT & #VRDHOT PWM Ramp Control */
287 u8 pwm_ramp_ctl;
288
289 /* miscellaneous setup regs */
290 u8 sfc1;
291 u8 sfc2;
292 u8 sf_tach_to_pwm;
293
294 /* The two PWM CTL2 registers can read something other than what was
295 last written for the OVR_DC field (duty cycle override). So, we
296 save the user-commanded value here. */
297 u8 pwm_override[2];
298};
299
300/* VID: mV
301 REG: 6-bits, right justified, *always* using Intel VRM/VRD 10 */
302static int LM93_VID_FROM_REG(u8 reg)
303{
304 return vid_from_reg((reg & 0x3f), 100);
305}
306
307/* min, max, and nominal register values, per channel (u8) */
308static const u8 lm93_vin_reg_min[16] = {
309 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
310 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xae,
311};
312static const u8 lm93_vin_reg_max[16] = {
313 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
314 0xff, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd1,
315};
316/* Values from the datasheet. They're here for documentation only.
317static const u8 lm93_vin_reg_nom[16] = {
318 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0,
319 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x40, 0xc0,
320};
321*/
322
323/* min, max, and nominal voltage readings, per channel (mV)*/
324static const unsigned long lm93_vin_val_min[16] = {
325 0, 0, 0, 0, 0, 0, 0, 0,
326 0, 0, 0, 0, 0, 0, 0, 3000,
327};
328
329static const unsigned long lm93_vin_val_max[16] = {
330 1236, 1236, 1236, 1600, 2000, 2000, 1600, 1600,
331 4400, 6500, 3333, 2625, 1312, 1312, 1236, 3600,
332};
333/* Values from the datasheet. They're here for documentation only.
334static const unsigned long lm93_vin_val_nom[16] = {
335 927, 927, 927, 1200, 1500, 1500, 1200, 1200,
336 3300, 5000, 2500, 1969, 984, 984, 309, 3300,
337};
338*/
339
340static unsigned LM93_IN_FROM_REG(int nr, u8 reg)
341{
342 const long uV_max = lm93_vin_val_max[nr] * 1000;
343 const long uV_min = lm93_vin_val_min[nr] * 1000;
344
345 const long slope = (uV_max - uV_min) /
346 (lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
347 const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
348
349 return (slope * reg + intercept + 500) / 1000;
350}
351
352/* IN: mV, limits determined by channel nr
353 REG: scaling determined by channel nr */
354static u8 LM93_IN_TO_REG(int nr, unsigned val)
355{
356 /* range limit */
357 const long mV = SENSORS_LIMIT(val,
358 lm93_vin_val_min[nr], lm93_vin_val_max[nr]);
359
360 /* try not to lose too much precision here */
361 const long uV = mV * 1000;
362 const long uV_max = lm93_vin_val_max[nr] * 1000;
363 const long uV_min = lm93_vin_val_min[nr] * 1000;
364
365 /* convert */
366 const long slope = (uV_max - uV_min) /
367 (lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
368 const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
369
370 u8 result = ((uV - intercept + (slope/2)) / slope);
371 result = SENSORS_LIMIT(result,
372 lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
373 return result;
374}
375
376/* vid in mV, upper == 0 indicates low limit, otherwise upper limit */
377static unsigned LM93_IN_REL_FROM_REG(u8 reg, int upper, int vid)
378{
379 const long uV_offset = upper ? (((reg >> 4 & 0x0f) + 1) * 12500) :
380 (((reg >> 0 & 0x0f) + 1) * -25000);
381 const long uV_vid = vid * 1000;
382 return (uV_vid + uV_offset + 5000) / 10000;
383}
384
385#define LM93_IN_MIN_FROM_REG(reg,vid) LM93_IN_REL_FROM_REG(reg,0,vid)
386#define LM93_IN_MAX_FROM_REG(reg,vid) LM93_IN_REL_FROM_REG(reg,1,vid)
387
388/* vid in mV , upper == 0 indicates low limit, otherwise upper limit
389 upper also determines which nibble of the register is returned
390 (the other nibble will be 0x0) */
391static u8 LM93_IN_REL_TO_REG(unsigned val, int upper, int vid)
392{
393 long uV_offset = vid * 1000 - val * 10000;
394 if (upper) {
395 uV_offset = SENSORS_LIMIT(uV_offset, 12500, 200000);
396 return (u8)((uV_offset / 12500 - 1) << 4);
397 } else {
398 uV_offset = SENSORS_LIMIT(uV_offset, -400000, -25000);
399 return (u8)((uV_offset / -25000 - 1) << 0);
400 }
401}
402
403/* TEMP: 1/1000 degrees C (-128C to +127C)
404 REG: 1C/bit, two's complement */
405static int LM93_TEMP_FROM_REG(u8 reg)
406{
407 return (s8)reg * 1000;
408}
409
410#define LM93_TEMP_MIN (-128000)
411#define LM93_TEMP_MAX ( 127000)
412
413/* TEMP: 1/1000 degrees C (-128C to +127C)
414 REG: 1C/bit, two's complement */
Christian Hohnstaedt5bfedac2007-08-16 11:40:10 +0200[diff] [blame]415static u8 LM93_TEMP_TO_REG(long temp)
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]416{
417 int ntemp = SENSORS_LIMIT(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
418 ntemp += (ntemp<0 ? -500 : 500);
419 return (u8)(ntemp / 1000);
420}
421
422/* Determine 4-bit temperature offset resolution */
423static int LM93_TEMP_OFFSET_MODE_FROM_REG(u8 sfc2, int nr)
424{
425 /* mode: 0 => 1C/bit, nonzero => 0.5C/bit */
426 return sfc2 & (nr < 2 ? 0x10 : 0x20);
427}
428
429/* This function is common to all 4-bit temperature offsets
430 reg is 4 bits right justified
431 mode 0 => 1C/bit, mode !0 => 0.5C/bit */
432static int LM93_TEMP_OFFSET_FROM_REG(u8 reg, int mode)
433{
434 return (reg & 0x0f) * (mode ? 5 : 10);
435}
436
437#define LM93_TEMP_OFFSET_MIN ( 0)
438#define LM93_TEMP_OFFSET_MAX0 (150)
439#define LM93_TEMP_OFFSET_MAX1 ( 75)
440
441/* This function is common to all 4-bit temperature offsets
442 returns 4 bits right justified
443 mode 0 => 1C/bit, mode !0 => 0.5C/bit */
444static u8 LM93_TEMP_OFFSET_TO_REG(int off, int mode)
445{
446 int factor = mode ? 5 : 10;
447
448 off = SENSORS_LIMIT(off, LM93_TEMP_OFFSET_MIN,
449 mode ? LM93_TEMP_OFFSET_MAX1 : LM93_TEMP_OFFSET_MAX0);
450 return (u8)((off + factor/2) / factor);
451}
452
453/* 0 <= nr <= 3 */
454static int LM93_TEMP_AUTO_OFFSET_FROM_REG(u8 reg, int nr, int mode)
455{
456 /* temp1-temp2 (nr=0,1) use lower nibble */
457 if (nr < 2)
458 return LM93_TEMP_OFFSET_FROM_REG(reg & 0x0f, mode);
459
460 /* temp3-temp4 (nr=2,3) use upper nibble */
461 else
462 return LM93_TEMP_OFFSET_FROM_REG(reg >> 4 & 0x0f, mode);
463}
464
465/* TEMP: 1/10 degrees C (0C to +15C (mode 0) or +7.5C (mode non-zero))
466 REG: 1.0C/bit (mode 0) or 0.5C/bit (mode non-zero)
467 0 <= nr <= 3 */
468static u8 LM93_TEMP_AUTO_OFFSET_TO_REG(u8 old, int off, int nr, int mode)
469{
470 u8 new = LM93_TEMP_OFFSET_TO_REG(off, mode);
471
472 /* temp1-temp2 (nr=0,1) use lower nibble */
473 if (nr < 2)
474 return (old & 0xf0) | (new & 0x0f);
475
476 /* temp3-temp4 (nr=2,3) use upper nibble */
477 else
478 return (new << 4 & 0xf0) | (old & 0x0f);
479}
480
481static int LM93_AUTO_BOOST_HYST_FROM_REGS(struct lm93_data *data, int nr,
482 int mode)
483{
484 u8 reg;
485
486 switch (nr) {
487 case 0:
488 reg = data->boost_hyst[0] & 0x0f;
489 break;
490 case 1:
491 reg = data->boost_hyst[0] >> 4 & 0x0f;
492 break;
493 case 2:
494 reg = data->boost_hyst[1] & 0x0f;
495 break;
496 case 3:
497 default:
498 reg = data->boost_hyst[1] >> 4 & 0x0f;
499 break;
500 }
501
502 return LM93_TEMP_FROM_REG(data->boost[nr]) -
503 LM93_TEMP_OFFSET_FROM_REG(reg, mode);
504}
505
506static u8 LM93_AUTO_BOOST_HYST_TO_REG(struct lm93_data *data, long hyst,
507 int nr, int mode)
508{
509 u8 reg = LM93_TEMP_OFFSET_TO_REG(
510 (LM93_TEMP_FROM_REG(data->boost[nr]) - hyst), mode);
511
512 switch (nr) {
513 case 0:
514 reg = (data->boost_hyst[0] & 0xf0) | (reg & 0x0f);
515 break;
516 case 1:
517 reg = (reg << 4 & 0xf0) | (data->boost_hyst[0] & 0x0f);
518 break;
519 case 2:
520 reg = (data->boost_hyst[1] & 0xf0) | (reg & 0x0f);
521 break;
522 case 3:
523 default:
524 reg = (reg << 4 & 0xf0) | (data->boost_hyst[1] & 0x0f);
525 break;
526 }
527
528 return reg;
529}
530
531/* PWM: 0-255 per sensors documentation
532 REG: 0-13 as mapped below... right justified */
533typedef enum { LM93_PWM_MAP_HI_FREQ, LM93_PWM_MAP_LO_FREQ } pwm_freq_t;
534static int lm93_pwm_map[2][16] = {
535 {
536 0x00, /* 0.00% */ 0x40, /* 25.00% */
537 0x50, /* 31.25% */ 0x60, /* 37.50% */
538 0x70, /* 43.75% */ 0x80, /* 50.00% */
539 0x90, /* 56.25% */ 0xa0, /* 62.50% */
540 0xb0, /* 68.75% */ 0xc0, /* 75.00% */
541 0xd0, /* 81.25% */ 0xe0, /* 87.50% */
542 0xf0, /* 93.75% */ 0xff, /* 100.00% */
543 0xff, 0xff, /* 14, 15 are reserved and should never occur */
544 },
545 {
546 0x00, /* 0.00% */ 0x40, /* 25.00% */
547 0x49, /* 28.57% */ 0x52, /* 32.14% */
548 0x5b, /* 35.71% */ 0x64, /* 39.29% */
549 0x6d, /* 42.86% */ 0x76, /* 46.43% */
550 0x80, /* 50.00% */ 0x89, /* 53.57% */
551 0x92, /* 57.14% */ 0xb6, /* 71.43% */
552 0xdb, /* 85.71% */ 0xff, /* 100.00% */
553 0xff, 0xff, /* 14, 15 are reserved and should never occur */
554 },
555};
556
557static int LM93_PWM_FROM_REG(u8 reg, pwm_freq_t freq)
558{
559 return lm93_pwm_map[freq][reg & 0x0f];
560}
561
562/* round up to nearest match */
563static u8 LM93_PWM_TO_REG(int pwm, pwm_freq_t freq)
564{
565 int i;
566 for (i = 0; i < 13; i++)
567 if (pwm <= lm93_pwm_map[freq][i])
568 break;
569
570 /* can fall through with i==13 */
571 return (u8)i;
572}
573
574static int LM93_FAN_FROM_REG(u16 regs)
575{
576 const u16 count = le16_to_cpu(regs) >> 2;
577 return count==0 ? -1 : count==0x3fff ? 0: 1350000 / count;
578}
579
580/*
581 * RPM: (82.5 to 1350000)
582 * REG: 14-bits, LE, *left* justified
583 */
584static u16 LM93_FAN_TO_REG(long rpm)
585{
586 u16 count, regs;
587
588 if (rpm == 0) {
589 count = 0x3fff;
590 } else {
591 rpm = SENSORS_LIMIT(rpm, 1, 1000000);
592 count = SENSORS_LIMIT((1350000 + rpm) / rpm, 1, 0x3ffe);
593 }
594
595 regs = count << 2;
596 return cpu_to_le16(regs);
597}
598
599/* PWM FREQ: HZ
600 REG: 0-7 as mapped below */
601static int lm93_pwm_freq_map[8] = {
602 22500, 96, 84, 72, 60, 48, 36, 12
603};
604
605static int LM93_PWM_FREQ_FROM_REG(u8 reg)
606{
607 return lm93_pwm_freq_map[reg & 0x07];
608}
609
610/* round up to nearest match */
611static u8 LM93_PWM_FREQ_TO_REG(int freq)
612{
613 int i;
614 for (i = 7; i > 0; i--)
615 if (freq <= lm93_pwm_freq_map[i])
616 break;
617
618 /* can fall through with i==0 */
619 return (u8)i;
620}
621
622/* TIME: 1/100 seconds
623 * REG: 0-7 as mapped below */
624static int lm93_spinup_time_map[8] = {
625 0, 10, 25, 40, 70, 100, 200, 400,
626};
627
628static int LM93_SPINUP_TIME_FROM_REG(u8 reg)
629{
630 return lm93_spinup_time_map[reg >> 5 & 0x07];
631}
632
633/* round up to nearest match */
634static u8 LM93_SPINUP_TIME_TO_REG(int time)
635{
636 int i;
637 for (i = 0; i < 7; i++)
638 if (time <= lm93_spinup_time_map[i])
639 break;
640
641 /* can fall through with i==8 */
642 return (u8)i;
643}
644
645#define LM93_RAMP_MIN 0
646#define LM93_RAMP_MAX 75
647
648static int LM93_RAMP_FROM_REG(u8 reg)
649{
650 return (reg & 0x0f) * 5;
651}
652
653/* RAMP: 1/100 seconds
654 REG: 50mS/bit 4-bits right justified */
655static u8 LM93_RAMP_TO_REG(int ramp)
656{
657 ramp = SENSORS_LIMIT(ramp, LM93_RAMP_MIN, LM93_RAMP_MAX);
658 return (u8)((ramp + 2) / 5);
659}
660
661/* PROCHOT: 0-255, 0 => 0%, 255 => > 96.6%
662 * REG: (same) */
663static u8 LM93_PROCHOT_TO_REG(long prochot)
664{
665 prochot = SENSORS_LIMIT(prochot, 0, 255);
666 return (u8)prochot;
667}
668
669/* PROCHOT-INTERVAL: 73 - 37200 (1/100 seconds)
670 * REG: 0-9 as mapped below */
671static int lm93_interval_map[10] = {
672 73, 146, 290, 580, 1170, 2330, 4660, 9320, 18600, 37200,
673};
674
675static int LM93_INTERVAL_FROM_REG(u8 reg)
676{
677 return lm93_interval_map[reg & 0x0f];
678}
679
680/* round up to nearest match */
681static u8 LM93_INTERVAL_TO_REG(long interval)
682{
683 int i;
684 for (i = 0; i < 9; i++)
685 if (interval <= lm93_interval_map[i])
686 break;
687
688 /* can fall through with i==9 */
689 return (u8)i;
690}
691
692/* GPIO: 0-255, GPIO0 is LSB
693 * REG: inverted */
694static unsigned LM93_GPI_FROM_REG(u8 reg)
695{
696 return ~reg & 0xff;
697}
698
699/* alarm bitmask definitions
700 The LM93 has nearly 64 bits of error status... I've pared that down to
701 what I think is a useful subset in order to fit it into 32 bits.
702
703 Especially note that the #VRD_HOT alarms are missing because we provide
704 that information as values in another sysfs file.
705
706 If libsensors is extended to support 64 bit values, this could be revisited.
707*/
708#define LM93_ALARM_IN1 0x00000001
709#define LM93_ALARM_IN2 0x00000002
710#define LM93_ALARM_IN3 0x00000004
711#define LM93_ALARM_IN4 0x00000008
712#define LM93_ALARM_IN5 0x00000010
713#define LM93_ALARM_IN6 0x00000020
714#define LM93_ALARM_IN7 0x00000040
715#define LM93_ALARM_IN8 0x00000080
716#define LM93_ALARM_IN9 0x00000100
717#define LM93_ALARM_IN10 0x00000200
718#define LM93_ALARM_IN11 0x00000400
719#define LM93_ALARM_IN12 0x00000800
720#define LM93_ALARM_IN13 0x00001000
721#define LM93_ALARM_IN14 0x00002000
722#define LM93_ALARM_IN15 0x00004000
723#define LM93_ALARM_IN16 0x00008000
724#define LM93_ALARM_FAN1 0x00010000
725#define LM93_ALARM_FAN2 0x00020000
726#define LM93_ALARM_FAN3 0x00040000
727#define LM93_ALARM_FAN4 0x00080000
728#define LM93_ALARM_PH1_ERR 0x00100000
729#define LM93_ALARM_PH2_ERR 0x00200000
730#define LM93_ALARM_SCSI1_ERR 0x00400000
731#define LM93_ALARM_SCSI2_ERR 0x00800000
732#define LM93_ALARM_DVDDP1_ERR 0x01000000
733#define LM93_ALARM_DVDDP2_ERR 0x02000000
734#define LM93_ALARM_D1_ERR 0x04000000
735#define LM93_ALARM_D2_ERR 0x08000000
736#define LM93_ALARM_TEMP1 0x10000000
737#define LM93_ALARM_TEMP2 0x20000000
738#define LM93_ALARM_TEMP3 0x40000000
739
740static unsigned LM93_ALARMS_FROM_REG(struct block1_t b1)
741{
742 unsigned result;
743 result = b1.host_status_2 & 0x3f;
744
745 if (vccp_limit_type[0])
746 result |= (b1.host_status_4 & 0x10) << 2;
747 else
748 result |= b1.host_status_2 & 0x40;
749
750 if (vccp_limit_type[1])
751 result |= (b1.host_status_4 & 0x20) << 2;
752 else
753 result |= b1.host_status_2 & 0x80;
754
755 result |= b1.host_status_3 << 8;
756 result |= (b1.fan_status & 0x0f) << 16;
757 result |= (b1.p1_prochot_status & 0x80) << 13;
758 result |= (b1.p2_prochot_status & 0x80) << 14;
759 result |= (b1.host_status_4 & 0xfc) << 20;
760 result |= (b1.host_status_1 & 0x07) << 28;
761 return result;
762}
763
764#define MAX_RETRIES 5
765
766static u8 lm93_read_byte(struct i2c_client *client, u8 reg)
767{
768 int value, i;
769
770 /* retry in case of read errors */
771 for (i=1; i<=MAX_RETRIES; i++) {
772 if ((value = i2c_smbus_read_byte_data(client, reg)) >= 0) {
773 return value;
774 } else {
775 dev_warn(&client->dev,"lm93: read byte data failed, "
776 "address 0x%02x.\n", reg);
777 mdelay(i + 3);
778 }
779
780 }
781
782 /* <TODO> what to return in case of error? */
783 dev_err(&client->dev,"lm93: All read byte retries failed!!\n");
784 return 0;
785}
786
787static int lm93_write_byte(struct i2c_client *client, u8 reg, u8 value)
788{
789 int result;
790
791 /* <TODO> how to handle write errors? */
792 result = i2c_smbus_write_byte_data(client, reg, value);
793
794 if (result < 0)
795 dev_warn(&client->dev,"lm93: write byte data failed, "
796 "0x%02x at address 0x%02x.\n", value, reg);
797
798 return result;
799}
800
801static u16 lm93_read_word(struct i2c_client *client, u8 reg)
802{
803 int value, i;
804
805 /* retry in case of read errors */
806 for (i=1; i<=MAX_RETRIES; i++) {
807 if ((value = i2c_smbus_read_word_data(client, reg)) >= 0) {
808 return value;
809 } else {
810 dev_warn(&client->dev,"lm93: read word data failed, "
811 "address 0x%02x.\n", reg);
812 mdelay(i + 3);
813 }
814
815 }
816
817 /* <TODO> what to return in case of error? */
818 dev_err(&client->dev,"lm93: All read word retries failed!!\n");
819 return 0;
820}
821
822static int lm93_write_word(struct i2c_client *client, u8 reg, u16 value)
823{
824 int result;
825
826 /* <TODO> how to handle write errors? */
827 result = i2c_smbus_write_word_data(client, reg, value);
828
829 if (result < 0)
830 dev_warn(&client->dev,"lm93: write word data failed, "
831 "0x%04x at address 0x%02x.\n", value, reg);
832
833 return result;
834}
835
836static u8 lm93_block_buffer[I2C_SMBUS_BLOCK_MAX];
837
838/*
839 read block data into values, retry if not expected length
840 fbn => index to lm93_block_read_cmds table
841 (Fixed Block Number - section 14.5.2 of LM93 datasheet)
842*/
843static void lm93_read_block(struct i2c_client *client, u8 fbn, u8 *values)
844{
845 int i, result=0;
846
847 for (i = 1; i <= MAX_RETRIES; i++) {
848 result = i2c_smbus_read_block_data(client,
849 lm93_block_read_cmds[fbn].cmd, lm93_block_buffer);
850
851 if (result == lm93_block_read_cmds[fbn].len) {
852 break;
853 } else {
854 dev_warn(&client->dev,"lm93: block read data failed, "
855 "command 0x%02x.\n",
856 lm93_block_read_cmds[fbn].cmd);
857 mdelay(i + 3);
858 }
859 }
860
861 if (result == lm93_block_read_cmds[fbn].len) {
862 memcpy(values,lm93_block_buffer,lm93_block_read_cmds[fbn].len);
863 } else {
864 /* <TODO> what to do in case of error? */
865 }
866}
867
868static struct lm93_data *lm93_update_device(struct device *dev)
869{
870 struct i2c_client *client = to_i2c_client(dev);
871 struct lm93_data *data = i2c_get_clientdata(client);
872 const unsigned long interval = HZ + (HZ / 2);
873
874 mutex_lock(&data->update_lock);
875
876 if (time_after(jiffies, data->last_updated + interval) ||
877 !data->valid) {
878
879 data->update(data, client);
880 data->last_updated = jiffies;
881 data->valid = 1;
882 }
883
884 mutex_unlock(&data->update_lock);
885 return data;
886}
887
888/* update routine for data that has no corresponding SMBus block command */
889static void lm93_update_client_common(struct lm93_data *data,
890 struct i2c_client *client)
891{
892 int i;
893 u8 *ptr;
894
895 /* temp1 - temp4: limits */
896 for (i = 0; i < 4; i++) {
897 data->temp_lim[i].min =
898 lm93_read_byte(client, LM93_REG_TEMP_MIN(i));
899 data->temp_lim[i].max =
900 lm93_read_byte(client, LM93_REG_TEMP_MAX(i));
901 }
902
903 /* config register */
904 data->config = lm93_read_byte(client, LM93_REG_CONFIG);
905
906 /* vid1 - vid2: values */
907 for (i = 0; i < 2; i++)
908 data->vid[i] = lm93_read_byte(client, LM93_REG_VID(i));
909
910 /* prochot1 - prochot2: limits */
911 for (i = 0; i < 2; i++)
912 data->prochot_max[i] = lm93_read_byte(client,
913 LM93_REG_PROCHOT_MAX(i));
914
915 /* vccp1 - vccp2: VID relative limits */
916 for (i = 0; i < 2; i++)
917 data->vccp_limits[i] = lm93_read_byte(client,
918 LM93_REG_VCCP_LIMIT_OFF(i));
919
920 /* GPIO input state */
921 data->gpi = lm93_read_byte(client, LM93_REG_GPI);
922
923 /* #PROCHOT override state */
924 data->prochot_override = lm93_read_byte(client,
925 LM93_REG_PROCHOT_OVERRIDE);
926
927 /* #PROCHOT intervals */
928 data->prochot_interval = lm93_read_byte(client,
929 LM93_REG_PROCHOT_INTERVAL);
930
931 /* Fan Boost Termperature registers */
932 for (i = 0; i < 4; i++)
933 data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i));
934
935 /* Fan Boost Temperature Hyst. registers */
936 data->boost_hyst[0] = lm93_read_byte(client, LM93_REG_BOOST_HYST_12);
937 data->boost_hyst[1] = lm93_read_byte(client, LM93_REG_BOOST_HYST_34);
938
939 /* Temperature Zone Min. PWM & Hysteresis registers */
940 data->auto_pwm_min_hyst[0] =
941 lm93_read_byte(client, LM93_REG_PWM_MIN_HYST_12);
942 data->auto_pwm_min_hyst[1] =
943 lm93_read_byte(client, LM93_REG_PWM_MIN_HYST_34);
944
945 /* #PROCHOT & #VRDHOT PWM Ramp Control register */
946 data->pwm_ramp_ctl = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
947
948 /* misc setup registers */
949 data->sfc1 = lm93_read_byte(client, LM93_REG_SFC1);
950 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
951 data->sf_tach_to_pwm = lm93_read_byte(client,
952 LM93_REG_SF_TACH_TO_PWM);
953
954 /* write back alarm values to clear */
955 for (i = 0, ptr = (u8 *)(&data->block1); i < 8; i++)
956 lm93_write_byte(client, LM93_REG_HOST_ERROR_1 + i, *(ptr + i));
957}
958
959/* update routine which uses SMBus block data commands */
960static void lm93_update_client_full(struct lm93_data *data,
961 struct i2c_client *client)
962{
963 dev_dbg(&client->dev,"starting device update (block data enabled)\n");
964
965 /* in1 - in16: values & limits */
966 lm93_read_block(client, 3, (u8 *)(data->block3));
967 lm93_read_block(client, 7, (u8 *)(data->block7));
968
969 /* temp1 - temp4: values */
970 lm93_read_block(client, 2, (u8 *)(data->block2));
971
972 /* prochot1 - prochot2: values */
973 lm93_read_block(client, 4, (u8 *)(data->block4));
974
975 /* fan1 - fan4: values & limits */
976 lm93_read_block(client, 5, (u8 *)(data->block5));
977 lm93_read_block(client, 8, (u8 *)(data->block8));
978
979 /* pmw control registers */
980 lm93_read_block(client, 9, (u8 *)(data->block9));
981
982 /* alarm values */
983 lm93_read_block(client, 1, (u8 *)(&data->block1));
984
985 /* auto/pwm registers */
986 lm93_read_block(client, 10, (u8 *)(&data->block10));
987
988 lm93_update_client_common(data, client);
989}
990
991/* update routine which uses SMBus byte/word data commands only */
992static void lm93_update_client_min(struct lm93_data *data,
993 struct i2c_client *client)
994{
995 int i,j;
996 u8 *ptr;
997
998 dev_dbg(&client->dev,"starting device update (block data disabled)\n");
999
1000 /* in1 - in16: values & limits */
1001 for (i = 0; i < 16; i++) {
1002 data->block3[i] =
1003 lm93_read_byte(client, LM93_REG_IN(i));
1004 data->block7[i].min =
1005 lm93_read_byte(client, LM93_REG_IN_MIN(i));
1006 data->block7[i].max =
1007 lm93_read_byte(client, LM93_REG_IN_MAX(i));
1008 }
1009
1010 /* temp1 - temp4: values */
1011 for (i = 0; i < 4; i++) {
1012 data->block2[i] =
1013 lm93_read_byte(client, LM93_REG_TEMP(i));
1014 }
1015
1016 /* prochot1 - prochot2: values */
1017 for (i = 0; i < 2; i++) {
1018 data->block4[i].cur =
1019 lm93_read_byte(client, LM93_REG_PROCHOT_CUR(i));
1020 data->block4[i].avg =
1021 lm93_read_byte(client, LM93_REG_PROCHOT_AVG(i));
1022 }
1023
1024 /* fan1 - fan4: values & limits */
1025 for (i = 0; i < 4; i++) {
1026 data->block5[i] =
1027 lm93_read_word(client, LM93_REG_FAN(i));
1028 data->block8[i] =
1029 lm93_read_word(client, LM93_REG_FAN_MIN(i));
1030 }
1031
1032 /* pwm control registers */
1033 for (i = 0; i < 2; i++) {
1034 for (j = 0; j < 4; j++) {
1035 data->block9[i][j] =
1036 lm93_read_byte(client, LM93_REG_PWM_CTL(i,j));
1037 }
1038 }
1039
1040 /* alarm values */
1041 for (i = 0, ptr = (u8 *)(&data->block1); i < 8; i++) {
1042 *(ptr + i) =
1043 lm93_read_byte(client, LM93_REG_HOST_ERROR_1 + i);
1044 }
1045
1046 /* auto/pwm (base temp) registers */
1047 for (i = 0; i < 4; i++) {
1048 data->block10.base[i] =
1049 lm93_read_byte(client, LM93_REG_TEMP_BASE(i));
1050 }
1051
1052 /* auto/pwm (offset temp) registers */
1053 for (i = 0; i < 12; i++) {
1054 data->block10.offset[i] =
1055 lm93_read_byte(client, LM93_REG_TEMP_OFFSET(i));
1056 }
1057
1058 lm93_update_client_common(data, client);
1059}
1060
1061/* following are the sysfs callback functions */
1062static ssize_t show_in(struct device *dev, struct device_attribute *attr,
1063 char *buf)
1064{
1065 int nr = (to_sensor_dev_attr(attr))->index;
1066
1067 struct lm93_data *data = lm93_update_device(dev);
1068 return sprintf(buf, "%d\n", LM93_IN_FROM_REG(nr, data->block3[nr]));
1069}
1070
1071static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 0);
1072static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 1);
1073static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 2);
1074static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 3);
1075static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 4);
1076static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 5);
1077static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 6);
1078static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 7);
1079static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in, NULL, 8);
1080static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in, NULL, 9);
1081static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_in, NULL, 10);
1082static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_in, NULL, 11);
1083static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_in, NULL, 12);
1084static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_in, NULL, 13);
1085static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_in, NULL, 14);
1086static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_in, NULL, 15);
1087
1088static ssize_t show_in_min(struct device *dev,
1089 struct device_attribute *attr, char *buf)
1090{
1091 int nr = (to_sensor_dev_attr(attr))->index;
1092 struct lm93_data *data = lm93_update_device(dev);
1093 int vccp = nr - 6;
1094 long rc, vid;
1095
1096 if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
1097 vid = LM93_VID_FROM_REG(data->vid[vccp]);
1098 rc = LM93_IN_MIN_FROM_REG(data->vccp_limits[vccp], vid);
1099 }
1100 else {
1101 rc = LM93_IN_FROM_REG(nr, data->block7[nr].min); \
1102 }
1103 return sprintf(buf, "%ld\n", rc); \
1104}
1105
1106static ssize_t store_in_min(struct device *dev, struct device_attribute *attr,
1107 const char *buf, size_t count)
1108{
1109 int nr = (to_sensor_dev_attr(attr))->index;
1110 struct i2c_client *client = to_i2c_client(dev);
1111 struct lm93_data *data = i2c_get_clientdata(client);
1112 u32 val = simple_strtoul(buf, NULL, 10);
1113 int vccp = nr - 6;
1114 long vid;
1115
1116 mutex_lock(&data->update_lock);
1117 if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
1118 vid = LM93_VID_FROM_REG(data->vid[vccp]);
1119 data->vccp_limits[vccp] = (data->vccp_limits[vccp] & 0xf0) |
1120 LM93_IN_REL_TO_REG(val, 0, vid);
1121 lm93_write_byte(client, LM93_REG_VCCP_LIMIT_OFF(vccp),
1122 data->vccp_limits[vccp]);
1123 }
1124 else {
1125 data->block7[nr].min = LM93_IN_TO_REG(nr,val);
1126 lm93_write_byte(client, LM93_REG_IN_MIN(nr),
1127 data->block7[nr].min);
1128 }
1129 mutex_unlock(&data->update_lock);
1130 return count;
1131}
1132
1133static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO,
1134 show_in_min, store_in_min, 0);
1135static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO,
1136 show_in_min, store_in_min, 1);
1137static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO,
1138 show_in_min, store_in_min, 2);
1139static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO,
1140 show_in_min, store_in_min, 3);
1141static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO,
1142 show_in_min, store_in_min, 4);
1143static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO,
1144 show_in_min, store_in_min, 5);
1145static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO,
1146 show_in_min, store_in_min, 6);
1147static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO,
1148 show_in_min, store_in_min, 7);
1149static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO,
1150 show_in_min, store_in_min, 8);
1151static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO,
1152 show_in_min, store_in_min, 9);
1153static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO,
1154 show_in_min, store_in_min, 10);
1155static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO,
1156 show_in_min, store_in_min, 11);
1157static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO,
1158 show_in_min, store_in_min, 12);
1159static SENSOR_DEVICE_ATTR(in14_min, S_IWUSR | S_IRUGO,
1160 show_in_min, store_in_min, 13);
1161static SENSOR_DEVICE_ATTR(in15_min, S_IWUSR | S_IRUGO,
1162 show_in_min, store_in_min, 14);
1163static SENSOR_DEVICE_ATTR(in16_min, S_IWUSR | S_IRUGO,
1164 show_in_min, store_in_min, 15);
1165
1166static ssize_t show_in_max(struct device *dev,
1167 struct device_attribute *attr, char *buf)
1168{
1169 int nr = (to_sensor_dev_attr(attr))->index;
1170 struct lm93_data *data = lm93_update_device(dev);
1171 int vccp = nr - 6;
1172 long rc, vid;
1173
1174 if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
1175 vid = LM93_VID_FROM_REG(data->vid[vccp]);
1176 rc = LM93_IN_MAX_FROM_REG(data->vccp_limits[vccp],vid);
1177 }
1178 else {
1179 rc = LM93_IN_FROM_REG(nr,data->block7[nr].max); \
1180 }
1181 return sprintf(buf,"%ld\n",rc); \
1182}
1183
1184static ssize_t store_in_max(struct device *dev, struct device_attribute *attr,
1185 const char *buf, size_t count)
1186{
1187 int nr = (to_sensor_dev_attr(attr))->index;
1188 struct i2c_client *client = to_i2c_client(dev);
1189 struct lm93_data *data = i2c_get_clientdata(client);
1190 u32 val = simple_strtoul(buf, NULL, 10);
1191 int vccp = nr - 6;
1192 long vid;
1193
1194 mutex_lock(&data->update_lock);
1195 if ((nr==6 || nr==7) && (vccp_limit_type[vccp])) {
1196 vid = LM93_VID_FROM_REG(data->vid[vccp]);
1197 data->vccp_limits[vccp] = (data->vccp_limits[vccp] & 0x0f) |
1198 LM93_IN_REL_TO_REG(val, 1, vid);
1199 lm93_write_byte(client, LM93_REG_VCCP_LIMIT_OFF(vccp),
1200 data->vccp_limits[vccp]);
1201 }
1202 else {
1203 data->block7[nr].max = LM93_IN_TO_REG(nr,val);
1204 lm93_write_byte(client, LM93_REG_IN_MAX(nr),
1205 data->block7[nr].max);
1206 }
1207 mutex_unlock(&data->update_lock);
1208 return count;
1209}
1210
1211static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO,
1212 show_in_max, store_in_max, 0);
1213static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO,
1214 show_in_max, store_in_max, 1);
1215static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO,
1216 show_in_max, store_in_max, 2);
1217static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO,
1218 show_in_max, store_in_max, 3);
1219static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO,
1220 show_in_max, store_in_max, 4);
1221static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO,
1222 show_in_max, store_in_max, 5);
1223static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO,
1224 show_in_max, store_in_max, 6);
1225static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO,
1226 show_in_max, store_in_max, 7);
1227static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO,
1228 show_in_max, store_in_max, 8);
1229static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO,
1230 show_in_max, store_in_max, 9);
1231static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO,
1232 show_in_max, store_in_max, 10);
1233static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO,
1234 show_in_max, store_in_max, 11);
1235static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO,
1236 show_in_max, store_in_max, 12);
1237static SENSOR_DEVICE_ATTR(in14_max, S_IWUSR | S_IRUGO,
1238 show_in_max, store_in_max, 13);
1239static SENSOR_DEVICE_ATTR(in15_max, S_IWUSR | S_IRUGO,
1240 show_in_max, store_in_max, 14);
1241static SENSOR_DEVICE_ATTR(in16_max, S_IWUSR | S_IRUGO,
1242 show_in_max, store_in_max, 15);
1243
1244static ssize_t show_temp(struct device *dev,
1245 struct device_attribute *attr, char *buf)
1246{
1247 int nr = (to_sensor_dev_attr(attr))->index;
1248 struct lm93_data *data = lm93_update_device(dev);
1249 return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->block2[nr]));
1250}
1251
1252static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
1253static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
1254static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
1255
1256static ssize_t show_temp_min(struct device *dev,
1257 struct device_attribute *attr, char *buf)
1258{
1259 int nr = (to_sensor_dev_attr(attr))->index;
1260 struct lm93_data *data = lm93_update_device(dev);
1261 return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->temp_lim[nr].min));
1262}
1263
1264static ssize_t store_temp_min(struct device *dev, struct device_attribute *attr,
1265 const char *buf, size_t count)
1266{
1267 int nr = (to_sensor_dev_attr(attr))->index;
1268 struct i2c_client *client = to_i2c_client(dev);
1269 struct lm93_data *data = i2c_get_clientdata(client);
Christian Hohnstaedt5bfedac2007-08-16 11:40:10 +0200[diff] [blame]1270 long val = simple_strtol(buf, NULL, 10);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]1271
1272 mutex_lock(&data->update_lock);
1273 data->temp_lim[nr].min = LM93_TEMP_TO_REG(val);
1274 lm93_write_byte(client, LM93_REG_TEMP_MIN(nr), data->temp_lim[nr].min);
1275 mutex_unlock(&data->update_lock);
1276 return count;
1277}
1278
1279static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
1280 show_temp_min, store_temp_min, 0);
1281static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO,
1282 show_temp_min, store_temp_min, 1);
1283static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO,
1284 show_temp_min, store_temp_min, 2);
1285
1286static ssize_t show_temp_max(struct device *dev,
1287 struct device_attribute *attr, char *buf)
1288{
1289 int nr = (to_sensor_dev_attr(attr))->index;
1290 struct lm93_data *data = lm93_update_device(dev);
1291 return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->temp_lim[nr].max));
1292}
1293
1294static ssize_t store_temp_max(struct device *dev, struct device_attribute *attr,
1295 const char *buf, size_t count)
1296{
1297 int nr = (to_sensor_dev_attr(attr))->index;
1298 struct i2c_client *client = to_i2c_client(dev);
1299 struct lm93_data *data = i2c_get_clientdata(client);
Christian Hohnstaedt5bfedac2007-08-16 11:40:10 +0200[diff] [blame]1300 long val = simple_strtol(buf, NULL, 10);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]1301
1302 mutex_lock(&data->update_lock);
1303 data->temp_lim[nr].max = LM93_TEMP_TO_REG(val);
1304 lm93_write_byte(client, LM93_REG_TEMP_MAX(nr), data->temp_lim[nr].max);
1305 mutex_unlock(&data->update_lock);
1306 return count;
1307}
1308
1309static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
1310 show_temp_max, store_temp_max, 0);
1311static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO,
1312 show_temp_max, store_temp_max, 1);
1313static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO,
1314 show_temp_max, store_temp_max, 2);
1315
1316static ssize_t show_temp_auto_base(struct device *dev,
1317 struct device_attribute *attr, char *buf)
1318{
1319 int nr = (to_sensor_dev_attr(attr))->index;
1320 struct lm93_data *data = lm93_update_device(dev);
1321 return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->block10.base[nr]));
1322}
1323
1324static ssize_t store_temp_auto_base(struct device *dev,
1325 struct device_attribute *attr,
1326 const char *buf, size_t count)
1327{
1328 int nr = (to_sensor_dev_attr(attr))->index;
1329 struct i2c_client *client = to_i2c_client(dev);
1330 struct lm93_data *data = i2c_get_clientdata(client);
Christian Hohnstaedt5bfedac2007-08-16 11:40:10 +0200[diff] [blame]1331 long val = simple_strtol(buf, NULL, 10);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]1332
1333 mutex_lock(&data->update_lock);
1334 data->block10.base[nr] = LM93_TEMP_TO_REG(val);
1335 lm93_write_byte(client, LM93_REG_TEMP_BASE(nr), data->block10.base[nr]);
1336 mutex_unlock(&data->update_lock);
1337 return count;
1338}
1339
1340static SENSOR_DEVICE_ATTR(temp1_auto_base, S_IWUSR | S_IRUGO,
1341 show_temp_auto_base, store_temp_auto_base, 0);
1342static SENSOR_DEVICE_ATTR(temp2_auto_base, S_IWUSR | S_IRUGO,
1343 show_temp_auto_base, store_temp_auto_base, 1);
1344static SENSOR_DEVICE_ATTR(temp3_auto_base, S_IWUSR | S_IRUGO,
1345 show_temp_auto_base, store_temp_auto_base, 2);
1346
1347static ssize_t show_temp_auto_boost(struct device *dev,
1348 struct device_attribute *attr,char *buf)
1349{
1350 int nr = (to_sensor_dev_attr(attr))->index;
1351 struct lm93_data *data = lm93_update_device(dev);
1352 return sprintf(buf,"%d\n",LM93_TEMP_FROM_REG(data->boost[nr]));
1353}
1354
1355static ssize_t store_temp_auto_boost(struct device *dev,
1356 struct device_attribute *attr,
1357 const char *buf, size_t count)
1358{
1359 int nr = (to_sensor_dev_attr(attr))->index;
1360 struct i2c_client *client = to_i2c_client(dev);
1361 struct lm93_data *data = i2c_get_clientdata(client);
Christian Hohnstaedt5bfedac2007-08-16 11:40:10 +0200[diff] [blame]1362 long val = simple_strtol(buf, NULL, 10);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]1363
1364 mutex_lock(&data->update_lock);
1365 data->boost[nr] = LM93_TEMP_TO_REG(val);
1366 lm93_write_byte(client, LM93_REG_BOOST(nr), data->boost[nr]);
1367 mutex_unlock(&data->update_lock);
1368 return count;
1369}
1370
1371static SENSOR_DEVICE_ATTR(temp1_auto_boost, S_IWUSR | S_IRUGO,
1372 show_temp_auto_boost, store_temp_auto_boost, 0);
1373static SENSOR_DEVICE_ATTR(temp2_auto_boost, S_IWUSR | S_IRUGO,
1374 show_temp_auto_boost, store_temp_auto_boost, 1);
1375static SENSOR_DEVICE_ATTR(temp3_auto_boost, S_IWUSR | S_IRUGO,
1376 show_temp_auto_boost, store_temp_auto_boost, 2);
1377
1378static ssize_t show_temp_auto_boost_hyst(struct device *dev,
1379 struct device_attribute *attr,
1380 char *buf)
1381{
1382 int nr = (to_sensor_dev_attr(attr))->index;
1383 struct lm93_data *data = lm93_update_device(dev);
1384 int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
1385 return sprintf(buf,"%d\n",
1386 LM93_AUTO_BOOST_HYST_FROM_REGS(data, nr, mode));
1387}
1388
1389static ssize_t store_temp_auto_boost_hyst(struct device *dev,
1390 struct device_attribute *attr,
1391 const char *buf, size_t count)
1392{
1393 int nr = (to_sensor_dev_attr(attr))->index;
1394 struct i2c_client *client = to_i2c_client(dev);
1395 struct lm93_data *data = i2c_get_clientdata(client);
1396 u32 val = simple_strtoul(buf, NULL, 10);
1397
1398 mutex_lock(&data->update_lock);
1399 /* force 0.5C/bit mode */
1400 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
1401 data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
1402 lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
1403 data->boost_hyst[nr/2] = LM93_AUTO_BOOST_HYST_TO_REG(data, val, nr, 1);
1404 lm93_write_byte(client, LM93_REG_BOOST_HYST(nr),
1405 data->boost_hyst[nr/2]);
1406 mutex_unlock(&data->update_lock);
1407 return count;
1408}
1409
1410static SENSOR_DEVICE_ATTR(temp1_auto_boost_hyst, S_IWUSR | S_IRUGO,
1411 show_temp_auto_boost_hyst,
1412 store_temp_auto_boost_hyst, 0);
1413static SENSOR_DEVICE_ATTR(temp2_auto_boost_hyst, S_IWUSR | S_IRUGO,
1414 show_temp_auto_boost_hyst,
1415 store_temp_auto_boost_hyst, 1);
1416static SENSOR_DEVICE_ATTR(temp3_auto_boost_hyst, S_IWUSR | S_IRUGO,
1417 show_temp_auto_boost_hyst,
1418 store_temp_auto_boost_hyst, 2);
1419
1420static ssize_t show_temp_auto_offset(struct device *dev,
1421 struct device_attribute *attr, char *buf)
1422{
1423 struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
1424 int nr = s_attr->index;
1425 int ofs = s_attr->nr;
1426 struct lm93_data *data = lm93_update_device(dev);
1427 int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
1428 return sprintf(buf,"%d\n",
1429 LM93_TEMP_AUTO_OFFSET_FROM_REG(data->block10.offset[ofs],
1430 nr,mode));
1431}
1432
1433static ssize_t store_temp_auto_offset(struct device *dev,
1434 struct device_attribute *attr,
1435 const char *buf, size_t count)
1436{
1437 struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
1438 int nr = s_attr->index;
1439 int ofs = s_attr->nr;
1440 struct i2c_client *client = to_i2c_client(dev);
1441 struct lm93_data *data = i2c_get_clientdata(client);
1442 u32 val = simple_strtoul(buf, NULL, 10);
1443
1444 mutex_lock(&data->update_lock);
1445 /* force 0.5C/bit mode */
1446 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
1447 data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
1448 lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
1449 data->block10.offset[ofs] = LM93_TEMP_AUTO_OFFSET_TO_REG(
1450 data->block10.offset[ofs], val, nr, 1);
1451 lm93_write_byte(client, LM93_REG_TEMP_OFFSET(ofs),
1452 data->block10.offset[ofs]);
1453 mutex_unlock(&data->update_lock);
1454 return count;
1455}
1456
1457static SENSOR_DEVICE_ATTR_2(temp1_auto_offset1, S_IWUSR | S_IRUGO,
1458 show_temp_auto_offset, store_temp_auto_offset, 0, 0);
1459static SENSOR_DEVICE_ATTR_2(temp1_auto_offset2, S_IWUSR | S_IRUGO,
1460 show_temp_auto_offset, store_temp_auto_offset, 1, 0);
1461static SENSOR_DEVICE_ATTR_2(temp1_auto_offset3, S_IWUSR | S_IRUGO,
1462 show_temp_auto_offset, store_temp_auto_offset, 2, 0);
1463static SENSOR_DEVICE_ATTR_2(temp1_auto_offset4, S_IWUSR | S_IRUGO,
1464 show_temp_auto_offset, store_temp_auto_offset, 3, 0);
1465static SENSOR_DEVICE_ATTR_2(temp1_auto_offset5, S_IWUSR | S_IRUGO,
1466 show_temp_auto_offset, store_temp_auto_offset, 4, 0);
1467static SENSOR_DEVICE_ATTR_2(temp1_auto_offset6, S_IWUSR | S_IRUGO,
1468 show_temp_auto_offset, store_temp_auto_offset, 5, 0);
1469static SENSOR_DEVICE_ATTR_2(temp1_auto_offset7, S_IWUSR | S_IRUGO,
1470 show_temp_auto_offset, store_temp_auto_offset, 6, 0);
1471static SENSOR_DEVICE_ATTR_2(temp1_auto_offset8, S_IWUSR | S_IRUGO,
1472 show_temp_auto_offset, store_temp_auto_offset, 7, 0);
1473static SENSOR_DEVICE_ATTR_2(temp1_auto_offset9, S_IWUSR | S_IRUGO,
1474 show_temp_auto_offset, store_temp_auto_offset, 8, 0);
1475static SENSOR_DEVICE_ATTR_2(temp1_auto_offset10, S_IWUSR | S_IRUGO,
1476 show_temp_auto_offset, store_temp_auto_offset, 9, 0);
1477static SENSOR_DEVICE_ATTR_2(temp1_auto_offset11, S_IWUSR | S_IRUGO,
1478 show_temp_auto_offset, store_temp_auto_offset, 10, 0);
1479static SENSOR_DEVICE_ATTR_2(temp1_auto_offset12, S_IWUSR | S_IRUGO,
1480 show_temp_auto_offset, store_temp_auto_offset, 11, 0);
1481static SENSOR_DEVICE_ATTR_2(temp2_auto_offset1, S_IWUSR | S_IRUGO,
1482 show_temp_auto_offset, store_temp_auto_offset, 0, 1);
1483static SENSOR_DEVICE_ATTR_2(temp2_auto_offset2, S_IWUSR | S_IRUGO,
1484 show_temp_auto_offset, store_temp_auto_offset, 1, 1);
1485static SENSOR_DEVICE_ATTR_2(temp2_auto_offset3, S_IWUSR | S_IRUGO,
1486 show_temp_auto_offset, store_temp_auto_offset, 2, 1);
1487static SENSOR_DEVICE_ATTR_2(temp2_auto_offset4, S_IWUSR | S_IRUGO,
1488 show_temp_auto_offset, store_temp_auto_offset, 3, 1);
1489static SENSOR_DEVICE_ATTR_2(temp2_auto_offset5, S_IWUSR | S_IRUGO,
1490 show_temp_auto_offset, store_temp_auto_offset, 4, 1);
1491static SENSOR_DEVICE_ATTR_2(temp2_auto_offset6, S_IWUSR | S_IRUGO,
1492 show_temp_auto_offset, store_temp_auto_offset, 5, 1);
1493static SENSOR_DEVICE_ATTR_2(temp2_auto_offset7, S_IWUSR | S_IRUGO,
1494 show_temp_auto_offset, store_temp_auto_offset, 6, 1);
1495static SENSOR_DEVICE_ATTR_2(temp2_auto_offset8, S_IWUSR | S_IRUGO,
1496 show_temp_auto_offset, store_temp_auto_offset, 7, 1);
1497static SENSOR_DEVICE_ATTR_2(temp2_auto_offset9, S_IWUSR | S_IRUGO,
1498 show_temp_auto_offset, store_temp_auto_offset, 8, 1);
1499static SENSOR_DEVICE_ATTR_2(temp2_auto_offset10, S_IWUSR | S_IRUGO,
1500 show_temp_auto_offset, store_temp_auto_offset, 9, 1);
1501static SENSOR_DEVICE_ATTR_2(temp2_auto_offset11, S_IWUSR | S_IRUGO,
1502 show_temp_auto_offset, store_temp_auto_offset, 10, 1);
1503static SENSOR_DEVICE_ATTR_2(temp2_auto_offset12, S_IWUSR | S_IRUGO,
1504 show_temp_auto_offset, store_temp_auto_offset, 11, 1);
1505static SENSOR_DEVICE_ATTR_2(temp3_auto_offset1, S_IWUSR | S_IRUGO,
1506 show_temp_auto_offset, store_temp_auto_offset, 0, 2);
1507static SENSOR_DEVICE_ATTR_2(temp3_auto_offset2, S_IWUSR | S_IRUGO,
1508 show_temp_auto_offset, store_temp_auto_offset, 1, 2);
1509static SENSOR_DEVICE_ATTR_2(temp3_auto_offset3, S_IWUSR | S_IRUGO,
1510 show_temp_auto_offset, store_temp_auto_offset, 2, 2);
1511static SENSOR_DEVICE_ATTR_2(temp3_auto_offset4, S_IWUSR | S_IRUGO,
1512 show_temp_auto_offset, store_temp_auto_offset, 3, 2);
1513static SENSOR_DEVICE_ATTR_2(temp3_auto_offset5, S_IWUSR | S_IRUGO,
1514 show_temp_auto_offset, store_temp_auto_offset, 4, 2);
1515static SENSOR_DEVICE_ATTR_2(temp3_auto_offset6, S_IWUSR | S_IRUGO,
1516 show_temp_auto_offset, store_temp_auto_offset, 5, 2);
1517static SENSOR_DEVICE_ATTR_2(temp3_auto_offset7, S_IWUSR | S_IRUGO,
1518 show_temp_auto_offset, store_temp_auto_offset, 6, 2);
1519static SENSOR_DEVICE_ATTR_2(temp3_auto_offset8, S_IWUSR | S_IRUGO,
1520 show_temp_auto_offset, store_temp_auto_offset, 7, 2);
1521static SENSOR_DEVICE_ATTR_2(temp3_auto_offset9, S_IWUSR | S_IRUGO,
1522 show_temp_auto_offset, store_temp_auto_offset, 8, 2);
1523static SENSOR_DEVICE_ATTR_2(temp3_auto_offset10, S_IWUSR | S_IRUGO,
1524 show_temp_auto_offset, store_temp_auto_offset, 9, 2);
1525static SENSOR_DEVICE_ATTR_2(temp3_auto_offset11, S_IWUSR | S_IRUGO,
1526 show_temp_auto_offset, store_temp_auto_offset, 10, 2);
1527static SENSOR_DEVICE_ATTR_2(temp3_auto_offset12, S_IWUSR | S_IRUGO,
1528 show_temp_auto_offset, store_temp_auto_offset, 11, 2);
1529
1530static ssize_t show_temp_auto_pwm_min(struct device *dev,
1531 struct device_attribute *attr, char *buf)
1532{
1533 int nr = (to_sensor_dev_attr(attr))->index;
1534 u8 reg, ctl4;
1535 struct lm93_data *data = lm93_update_device(dev);
1536 reg = data->auto_pwm_min_hyst[nr/2] >> 4 & 0x0f;
1537 ctl4 = data->block9[nr][LM93_PWM_CTL4];
1538 return sprintf(buf,"%d\n",LM93_PWM_FROM_REG(reg, (ctl4 & 0x07) ?
1539 LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ));
1540}
1541
1542static ssize_t store_temp_auto_pwm_min(struct device *dev,
1543 struct device_attribute *attr,
1544 const char *buf, size_t count)
1545{
1546 int nr = (to_sensor_dev_attr(attr))->index;
1547 struct i2c_client *client = to_i2c_client(dev);
1548 struct lm93_data *data = i2c_get_clientdata(client);
1549 u32 val = simple_strtoul(buf, NULL, 10);
1550 u8 reg, ctl4;
1551
1552 mutex_lock(&data->update_lock);
1553 reg = lm93_read_byte(client, LM93_REG_PWM_MIN_HYST(nr));
1554 ctl4 = lm93_read_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
1555 reg = (reg & 0x0f) |
1556 LM93_PWM_TO_REG(val, (ctl4 & 0x07) ?
1557 LM93_PWM_MAP_LO_FREQ :
1558 LM93_PWM_MAP_HI_FREQ) << 4;
1559 data->auto_pwm_min_hyst[nr/2] = reg;
1560 lm93_write_byte(client, LM93_REG_PWM_MIN_HYST(nr), reg);
1561 mutex_unlock(&data->update_lock);
1562 return count;
1563}
1564
1565static SENSOR_DEVICE_ATTR(temp1_auto_pwm_min, S_IWUSR | S_IRUGO,
1566 show_temp_auto_pwm_min,
1567 store_temp_auto_pwm_min, 0);
1568static SENSOR_DEVICE_ATTR(temp2_auto_pwm_min, S_IWUSR | S_IRUGO,
1569 show_temp_auto_pwm_min,
1570 store_temp_auto_pwm_min, 1);
1571static SENSOR_DEVICE_ATTR(temp3_auto_pwm_min, S_IWUSR | S_IRUGO,
1572 show_temp_auto_pwm_min,
1573 store_temp_auto_pwm_min, 2);
1574
1575static ssize_t show_temp_auto_offset_hyst(struct device *dev,
1576 struct device_attribute *attr, char *buf)
1577{
1578 int nr = (to_sensor_dev_attr(attr))->index;
1579 struct lm93_data *data = lm93_update_device(dev);
1580 int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
1581 return sprintf(buf,"%d\n",LM93_TEMP_OFFSET_FROM_REG(
1582 data->auto_pwm_min_hyst[nr/2], mode));
1583}
1584
1585static ssize_t store_temp_auto_offset_hyst(struct device *dev,
1586 struct device_attribute *attr,
1587 const char *buf, size_t count)
1588{
1589 int nr = (to_sensor_dev_attr(attr))->index;
1590 struct i2c_client *client = to_i2c_client(dev);
1591 struct lm93_data *data = i2c_get_clientdata(client);
1592 u32 val = simple_strtoul(buf, NULL, 10);
1593 u8 reg;
1594
1595 mutex_lock(&data->update_lock);
1596 /* force 0.5C/bit mode */
1597 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
1598 data->sfc2 |= ((nr < 2) ? 0x10 : 0x20);
1599 lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
1600 reg = data->auto_pwm_min_hyst[nr/2];
1601 reg = (reg & 0xf0) | (LM93_TEMP_OFFSET_TO_REG(val, 1) & 0x0f);
1602 data->auto_pwm_min_hyst[nr/2] = reg;
1603 lm93_write_byte(client, LM93_REG_PWM_MIN_HYST(nr), reg);
1604 mutex_unlock(&data->update_lock);
1605 return count;
1606}
1607
1608static SENSOR_DEVICE_ATTR(temp1_auto_offset_hyst, S_IWUSR | S_IRUGO,
1609 show_temp_auto_offset_hyst,
1610 store_temp_auto_offset_hyst, 0);
1611static SENSOR_DEVICE_ATTR(temp2_auto_offset_hyst, S_IWUSR | S_IRUGO,
1612 show_temp_auto_offset_hyst,
1613 store_temp_auto_offset_hyst, 1);
1614static SENSOR_DEVICE_ATTR(temp3_auto_offset_hyst, S_IWUSR | S_IRUGO,
1615 show_temp_auto_offset_hyst,
1616 store_temp_auto_offset_hyst, 2);
1617
1618static ssize_t show_fan_input(struct device *dev,
1619 struct device_attribute *attr, char *buf)
1620{
1621 struct sensor_device_attribute *s_attr = to_sensor_dev_attr(attr);
1622 int nr = s_attr->index;
1623 struct lm93_data *data = lm93_update_device(dev);
1624
1625 return sprintf(buf,"%d\n",LM93_FAN_FROM_REG(data->block5[nr]));
1626}
1627
1628static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
1629static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
1630static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
1631static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
1632
1633static ssize_t show_fan_min(struct device *dev,
1634 struct device_attribute *attr, char *buf)
1635{
1636 int nr = (to_sensor_dev_attr(attr))->index;
1637 struct lm93_data *data = lm93_update_device(dev);
1638
1639 return sprintf(buf,"%d\n",LM93_FAN_FROM_REG(data->block8[nr]));
1640}
1641
1642static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr,
1643 const char *buf, size_t count)
1644{
1645 int nr = (to_sensor_dev_attr(attr))->index;
1646 struct i2c_client *client = to_i2c_client(dev);
1647 struct lm93_data *data = i2c_get_clientdata(client);
1648 u32 val = simple_strtoul(buf, NULL, 10);
1649
1650 mutex_lock(&data->update_lock);
1651 data->block8[nr] = LM93_FAN_TO_REG(val);
1652 lm93_write_word(client,LM93_REG_FAN_MIN(nr),data->block8[nr]);
1653 mutex_unlock(&data->update_lock);
1654 return count;
1655}
1656
1657static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
1658 show_fan_min, store_fan_min, 0);
1659static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
1660 show_fan_min, store_fan_min, 1);
1661static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
1662 show_fan_min, store_fan_min, 2);
1663static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
1664 show_fan_min, store_fan_min, 3);
1665
1666/* some tedious bit-twiddling here to deal with the register format:
1667
1668 data->sf_tach_to_pwm: (tach to pwm mapping bits)
1669
1670 bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
1671 T4:P2 T4:P1 T3:P2 T3:P1 T2:P2 T2:P1 T1:P2 T1:P1
1672
1673 data->sfc2: (enable bits)
1674
1675 bit | 3 | 2 | 1 | 0
1676 T4 T3 T2 T1
1677*/
1678
1679static ssize_t show_fan_smart_tach(struct device *dev,
1680 struct device_attribute *attr, char *buf)
1681{
1682 int nr = (to_sensor_dev_attr(attr))->index;
1683 struct lm93_data *data = lm93_update_device(dev);
1684 long rc = 0;
1685 int mapping;
1686
1687 /* extract the relevant mapping */
1688 mapping = (data->sf_tach_to_pwm >> (nr * 2)) & 0x03;
1689
1690 /* if there's a mapping and it's enabled */
1691 if (mapping && ((data->sfc2 >> nr) & 0x01))
1692 rc = mapping;
1693 return sprintf(buf,"%ld\n",rc);
1694}
1695
1696/* helper function - must grab data->update_lock before calling
1697 fan is 0-3, indicating fan1-fan4 */
1698static void lm93_write_fan_smart_tach(struct i2c_client *client,
1699 struct lm93_data *data, int fan, long value)
1700{
1701 /* insert the new mapping and write it out */
1702 data->sf_tach_to_pwm = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
1703 data->sf_tach_to_pwm &= ~(0x3 << fan * 2);
1704 data->sf_tach_to_pwm |= value << fan * 2;
1705 lm93_write_byte(client, LM93_REG_SF_TACH_TO_PWM, data->sf_tach_to_pwm);
1706
1707 /* insert the enable bit and write it out */
1708 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
1709 if (value)
1710 data->sfc2 |= 1 << fan;
1711 else
1712 data->sfc2 &= ~(1 << fan);
1713 lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
1714}
1715
1716static ssize_t store_fan_smart_tach(struct device *dev,
1717 struct device_attribute *attr,
1718 const char *buf, size_t count)
1719{
1720 int nr = (to_sensor_dev_attr(attr))->index;
1721 struct i2c_client *client = to_i2c_client(dev);
1722 struct lm93_data *data = i2c_get_clientdata(client);
1723 u32 val = simple_strtoul(buf, NULL, 10);
1724
1725 mutex_lock(&data->update_lock);
1726 /* sanity test, ignore the write otherwise */
1727 if (0 <= val && val <= 2) {
1728 /* can't enable if pwm freq is 22.5KHz */
1729 if (val) {
1730 u8 ctl4 = lm93_read_byte(client,
1731 LM93_REG_PWM_CTL(val-1,LM93_PWM_CTL4));
1732 if ((ctl4 & 0x07) == 0)
1733 val = 0;
1734 }
1735 lm93_write_fan_smart_tach(client, data, nr, val);
1736 }
1737 mutex_unlock(&data->update_lock);
1738 return count;
1739}
1740
1741static SENSOR_DEVICE_ATTR(fan1_smart_tach, S_IWUSR | S_IRUGO,
1742 show_fan_smart_tach, store_fan_smart_tach, 0);
1743static SENSOR_DEVICE_ATTR(fan2_smart_tach, S_IWUSR | S_IRUGO,
1744 show_fan_smart_tach, store_fan_smart_tach, 1);
1745static SENSOR_DEVICE_ATTR(fan3_smart_tach, S_IWUSR | S_IRUGO,
1746 show_fan_smart_tach, store_fan_smart_tach, 2);
1747static SENSOR_DEVICE_ATTR(fan4_smart_tach, S_IWUSR | S_IRUGO,
1748 show_fan_smart_tach, store_fan_smart_tach, 3);
1749
1750static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
1751 char *buf)
1752{
1753 int nr = (to_sensor_dev_attr(attr))->index;
1754 struct lm93_data *data = lm93_update_device(dev);
1755 u8 ctl2, ctl4;
1756 long rc;
1757
1758 ctl2 = data->block9[nr][LM93_PWM_CTL2];
1759 ctl4 = data->block9[nr][LM93_PWM_CTL4];
1760 if (ctl2 & 0x01) /* show user commanded value if enabled */
1761 rc = data->pwm_override[nr];
1762 else /* show present h/w value if manual pwm disabled */
1763 rc = LM93_PWM_FROM_REG(ctl2 >> 4, (ctl4 & 0x07) ?
1764 LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ);
1765 return sprintf(buf,"%ld\n",rc);
1766}
1767
1768static ssize_t store_pwm(struct device *dev, struct device_attribute *attr,
1769 const char *buf, size_t count)
1770{
1771 int nr = (to_sensor_dev_attr(attr))->index;
1772 struct i2c_client *client = to_i2c_client(dev);
1773 struct lm93_data *data = i2c_get_clientdata(client);
1774 u32 val = simple_strtoul(buf, NULL, 10);
1775 u8 ctl2, ctl4;
1776
1777 mutex_lock(&data->update_lock);
1778 ctl2 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2));
1779 ctl4 = lm93_read_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
1780 ctl2 = (ctl2 & 0x0f) | LM93_PWM_TO_REG(val,(ctl4 & 0x07) ?
1781 LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ) << 4;
1782 /* save user commanded value */
1783 data->pwm_override[nr] = LM93_PWM_FROM_REG(ctl2 >> 4,
1784 (ctl4 & 0x07) ? LM93_PWM_MAP_LO_FREQ :
1785 LM93_PWM_MAP_HI_FREQ);
1786 lm93_write_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2),ctl2);
1787 mutex_unlock(&data->update_lock);
1788 return count;
1789}
1790
1791static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
1792static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
1793
1794static ssize_t show_pwm_enable(struct device *dev,
1795 struct device_attribute *attr, char *buf)
1796{
1797 int nr = (to_sensor_dev_attr(attr))->index;
1798 struct lm93_data *data = lm93_update_device(dev);
1799 u8 ctl2;
1800 long rc;
1801
1802 ctl2 = data->block9[nr][LM93_PWM_CTL2];
1803 if (ctl2 & 0x01) /* manual override enabled ? */
1804 rc = ((ctl2 & 0xF0) == 0xF0) ? 0 : 1;
1805 else
1806 rc = 2;
1807 return sprintf(buf,"%ld\n",rc);
1808}
1809
1810static ssize_t store_pwm_enable(struct device *dev,
1811 struct device_attribute *attr,
1812 const char *buf, size_t count)
1813{
1814 int nr = (to_sensor_dev_attr(attr))->index;
1815 struct i2c_client *client = to_i2c_client(dev);
1816 struct lm93_data *data = i2c_get_clientdata(client);
1817 u32 val = simple_strtoul(buf, NULL, 10);
1818 u8 ctl2;
1819
1820 mutex_lock(&data->update_lock);
1821 ctl2 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2));
1822
1823 switch (val) {
1824 case 0:
1825 ctl2 |= 0xF1; /* enable manual override, set PWM to max */
1826 break;
1827 case 1: ctl2 |= 0x01; /* enable manual override */
1828 break;
1829 case 2: ctl2 &= ~0x01; /* disable manual override */
1830 break;
1831 default:
1832 mutex_unlock(&data->update_lock);
1833 return -EINVAL;
1834 }
1835
1836 lm93_write_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2),ctl2);
1837 mutex_unlock(&data->update_lock);
1838 return count;
1839}
1840
1841static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
1842 show_pwm_enable, store_pwm_enable, 0);
1843static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
1844 show_pwm_enable, store_pwm_enable, 1);
1845
1846static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
1847 char *buf)
1848{
1849 int nr = (to_sensor_dev_attr(attr))->index;
1850 struct lm93_data *data = lm93_update_device(dev);
1851 u8 ctl4;
1852
1853 ctl4 = data->block9[nr][LM93_PWM_CTL4];
1854 return sprintf(buf,"%d\n",LM93_PWM_FREQ_FROM_REG(ctl4));
1855}
1856
1857/* helper function - must grab data->update_lock before calling
1858 pwm is 0-1, indicating pwm1-pwm2
1859 this disables smart tach for all tach channels bound to the given pwm */
1860static void lm93_disable_fan_smart_tach(struct i2c_client *client,
1861 struct lm93_data *data, int pwm)
1862{
1863 int mapping = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
1864 int mask;
1865
1866 /* collapse the mapping into a mask of enable bits */
1867 mapping = (mapping >> pwm) & 0x55;
1868 mask = mapping & 0x01;
1869 mask |= (mapping & 0x04) >> 1;
1870 mask |= (mapping & 0x10) >> 2;
1871 mask |= (mapping & 0x40) >> 3;
1872
1873 /* disable smart tach according to the mask */
1874 data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
1875 data->sfc2 &= ~mask;
1876 lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
1877}
1878
1879static ssize_t store_pwm_freq(struct device *dev,
1880 struct device_attribute *attr,
1881 const char *buf, size_t count)
1882{
1883 int nr = (to_sensor_dev_attr(attr))->index;
1884 struct i2c_client *client = to_i2c_client(dev);
1885 struct lm93_data *data = i2c_get_clientdata(client);
1886 u32 val = simple_strtoul(buf, NULL, 10);
1887 u8 ctl4;
1888
1889 mutex_lock(&data->update_lock);
1890 ctl4 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
1891 ctl4 = (ctl4 & 0xf8) | LM93_PWM_FREQ_TO_REG(val);
1892 data->block9[nr][LM93_PWM_CTL4] = ctl4;
1893 /* ctl4 == 0 -> 22.5KHz -> disable smart tach */
1894 if (!ctl4)
1895 lm93_disable_fan_smart_tach(client, data, nr);
1896 lm93_write_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4), ctl4);
1897 mutex_unlock(&data->update_lock);
1898 return count;
1899}
1900
1901static SENSOR_DEVICE_ATTR(pwm1_freq, S_IWUSR | S_IRUGO,
1902 show_pwm_freq, store_pwm_freq, 0);
1903static SENSOR_DEVICE_ATTR(pwm2_freq, S_IWUSR | S_IRUGO,
1904 show_pwm_freq, store_pwm_freq, 1);
1905
1906static ssize_t show_pwm_auto_channels(struct device *dev,
1907 struct device_attribute *attr, char *buf)
1908{
1909 int nr = (to_sensor_dev_attr(attr))->index;
1910 struct lm93_data *data = lm93_update_device(dev);
1911 return sprintf(buf,"%d\n",data->block9[nr][LM93_PWM_CTL1]);
1912}
1913
1914static ssize_t store_pwm_auto_channels(struct device *dev,
1915 struct device_attribute *attr,
1916 const char *buf, size_t count)
1917{
1918 int nr = (to_sensor_dev_attr(attr))->index;
1919 struct i2c_client *client = to_i2c_client(dev);
1920 struct lm93_data *data = i2c_get_clientdata(client);
1921 u32 val = simple_strtoul(buf, NULL, 10);
1922
1923 mutex_lock(&data->update_lock);
1924 data->block9[nr][LM93_PWM_CTL1] = SENSORS_LIMIT(val, 0, 255);
1925 lm93_write_byte(client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL1),
1926 data->block9[nr][LM93_PWM_CTL1]);
1927 mutex_unlock(&data->update_lock);
1928 return count;
1929}
1930
1931static SENSOR_DEVICE_ATTR(pwm1_auto_channels, S_IWUSR | S_IRUGO,
1932 show_pwm_auto_channels, store_pwm_auto_channels, 0);
1933static SENSOR_DEVICE_ATTR(pwm2_auto_channels, S_IWUSR | S_IRUGO,
1934 show_pwm_auto_channels, store_pwm_auto_channels, 1);
1935
1936static ssize_t show_pwm_auto_spinup_min(struct device *dev,
1937 struct device_attribute *attr,char *buf)
1938{
1939 int nr = (to_sensor_dev_attr(attr))->index;
1940 struct lm93_data *data = lm93_update_device(dev);
1941 u8 ctl3, ctl4;
1942
1943 ctl3 = data->block9[nr][LM93_PWM_CTL3];
1944 ctl4 = data->block9[nr][LM93_PWM_CTL4];
1945 return sprintf(buf,"%d\n",
1946 LM93_PWM_FROM_REG(ctl3 & 0x0f, (ctl4 & 0x07) ?
1947 LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ));
1948}
1949
1950static ssize_t store_pwm_auto_spinup_min(struct device *dev,
1951 struct device_attribute *attr,
1952 const char *buf, size_t count)
1953{
1954 int nr = (to_sensor_dev_attr(attr))->index;
1955 struct i2c_client *client = to_i2c_client(dev);
1956 struct lm93_data *data = i2c_get_clientdata(client);
1957 u32 val = simple_strtoul(buf, NULL, 10);
1958 u8 ctl3, ctl4;
1959
1960 mutex_lock(&data->update_lock);
1961 ctl3 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3));
1962 ctl4 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL4));
1963 ctl3 = (ctl3 & 0xf0) | LM93_PWM_TO_REG(val, (ctl4 & 0x07) ?
1964 LM93_PWM_MAP_LO_FREQ :
1965 LM93_PWM_MAP_HI_FREQ);
1966 data->block9[nr][LM93_PWM_CTL3] = ctl3;
1967 lm93_write_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3), ctl3);
1968 mutex_unlock(&data->update_lock);
1969 return count;
1970}
1971
1972static SENSOR_DEVICE_ATTR(pwm1_auto_spinup_min, S_IWUSR | S_IRUGO,
1973 show_pwm_auto_spinup_min,
1974 store_pwm_auto_spinup_min, 0);
1975static SENSOR_DEVICE_ATTR(pwm2_auto_spinup_min, S_IWUSR | S_IRUGO,
1976 show_pwm_auto_spinup_min,
1977 store_pwm_auto_spinup_min, 1);
1978
1979static ssize_t show_pwm_auto_spinup_time(struct device *dev,
1980 struct device_attribute *attr, char *buf)
1981{
1982 int nr = (to_sensor_dev_attr(attr))->index;
1983 struct lm93_data *data = lm93_update_device(dev);
1984 return sprintf(buf,"%d\n",LM93_SPINUP_TIME_FROM_REG(
1985 data->block9[nr][LM93_PWM_CTL3]));
1986}
1987
1988static ssize_t store_pwm_auto_spinup_time(struct device *dev,
1989 struct device_attribute *attr,
1990 const char *buf, size_t count)
1991{
1992 int nr = (to_sensor_dev_attr(attr))->index;
1993 struct i2c_client *client = to_i2c_client(dev);
1994 struct lm93_data *data = i2c_get_clientdata(client);
1995 u32 val = simple_strtoul(buf, NULL, 10);
1996 u8 ctl3;
1997
1998 mutex_lock(&data->update_lock);
1999 ctl3 = lm93_read_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3));
2000 ctl3 = (ctl3 & 0x1f) | (LM93_SPINUP_TIME_TO_REG(val) << 5 & 0xe0);
2001 data->block9[nr][LM93_PWM_CTL3] = ctl3;
2002 lm93_write_byte(client,LM93_REG_PWM_CTL(nr, LM93_PWM_CTL3), ctl3);
2003 mutex_unlock(&data->update_lock);
2004 return count;
2005}
2006
2007static SENSOR_DEVICE_ATTR(pwm1_auto_spinup_time, S_IWUSR | S_IRUGO,
2008 show_pwm_auto_spinup_time,
2009 store_pwm_auto_spinup_time, 0);
2010static SENSOR_DEVICE_ATTR(pwm2_auto_spinup_time, S_IWUSR | S_IRUGO,
2011 show_pwm_auto_spinup_time,
2012 store_pwm_auto_spinup_time, 1);
2013
2014static ssize_t show_pwm_auto_prochot_ramp(struct device *dev,
2015 struct device_attribute *attr, char *buf)
2016{
2017 struct lm93_data *data = lm93_update_device(dev);
2018 return sprintf(buf,"%d\n",
2019 LM93_RAMP_FROM_REG(data->pwm_ramp_ctl >> 4 & 0x0f));
2020}
2021
2022static ssize_t store_pwm_auto_prochot_ramp(struct device *dev,
2023 struct device_attribute *attr,
2024 const char *buf, size_t count)
2025{
2026 struct i2c_client *client = to_i2c_client(dev);
2027 struct lm93_data *data = i2c_get_clientdata(client);
2028 u32 val = simple_strtoul(buf, NULL, 10);
2029 u8 ramp;
2030
2031 mutex_lock(&data->update_lock);
2032 ramp = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
2033 ramp = (ramp & 0x0f) | (LM93_RAMP_TO_REG(val) << 4 & 0xf0);
2034 lm93_write_byte(client, LM93_REG_PWM_RAMP_CTL, ramp);
2035 mutex_unlock(&data->update_lock);
2036 return count;
2037}
2038
2039static DEVICE_ATTR(pwm_auto_prochot_ramp, S_IRUGO | S_IWUSR,
2040 show_pwm_auto_prochot_ramp,
2041 store_pwm_auto_prochot_ramp);
2042
2043static ssize_t show_pwm_auto_vrdhot_ramp(struct device *dev,
2044 struct device_attribute *attr, char *buf)
2045{
2046 struct lm93_data *data = lm93_update_device(dev);
2047 return sprintf(buf,"%d\n",
2048 LM93_RAMP_FROM_REG(data->pwm_ramp_ctl & 0x0f));
2049}
2050
2051static ssize_t store_pwm_auto_vrdhot_ramp(struct device *dev,
2052 struct device_attribute *attr,
2053 const char *buf, size_t count)
2054{
2055 struct i2c_client *client = to_i2c_client(dev);
2056 struct lm93_data *data = i2c_get_clientdata(client);
2057 u32 val = simple_strtoul(buf, NULL, 10);
2058 u8 ramp;
2059
2060 mutex_lock(&data->update_lock);
2061 ramp = lm93_read_byte(client, LM93_REG_PWM_RAMP_CTL);
2062 ramp = (ramp & 0xf0) | (LM93_RAMP_TO_REG(val) & 0x0f);
2063 lm93_write_byte(client, LM93_REG_PWM_RAMP_CTL, ramp);
2064 mutex_unlock(&data->update_lock);
2065 return 0;
2066}
2067
2068static DEVICE_ATTR(pwm_auto_vrdhot_ramp, S_IRUGO | S_IWUSR,
2069 show_pwm_auto_vrdhot_ramp,
2070 store_pwm_auto_vrdhot_ramp);
2071
2072static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
2073 char *buf)
2074{
2075 int nr = (to_sensor_dev_attr(attr))->index;
2076 struct lm93_data *data = lm93_update_device(dev);
2077 return sprintf(buf,"%d\n",LM93_VID_FROM_REG(data->vid[nr]));
2078}
2079
Jean Delvaree7f62302007-09-04 14:03:43 +0200[diff] [blame]2080static SENSOR_DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL, 0);
2081static SENSOR_DEVICE_ATTR(cpu1_vid, S_IRUGO, show_vid, NULL, 1);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2082
2083static ssize_t show_prochot(struct device *dev, struct device_attribute *attr,
2084 char *buf)
2085{
2086 int nr = (to_sensor_dev_attr(attr))->index;
2087 struct lm93_data *data = lm93_update_device(dev);
2088 return sprintf(buf,"%d\n",data->block4[nr].cur);
2089}
2090
2091static SENSOR_DEVICE_ATTR(prochot1, S_IRUGO, show_prochot, NULL, 0);
2092static SENSOR_DEVICE_ATTR(prochot2, S_IRUGO, show_prochot, NULL, 1);
2093
2094static ssize_t show_prochot_avg(struct device *dev,
2095 struct device_attribute *attr, char *buf)
2096{
2097 int nr = (to_sensor_dev_attr(attr))->index;
2098 struct lm93_data *data = lm93_update_device(dev);
2099 return sprintf(buf,"%d\n",data->block4[nr].avg);
2100}
2101
2102static SENSOR_DEVICE_ATTR(prochot1_avg, S_IRUGO, show_prochot_avg, NULL, 0);
2103static SENSOR_DEVICE_ATTR(prochot2_avg, S_IRUGO, show_prochot_avg, NULL, 1);
2104
2105static ssize_t show_prochot_max(struct device *dev,
2106 struct device_attribute *attr, char *buf)
2107{
2108 int nr = (to_sensor_dev_attr(attr))->index;
2109 struct lm93_data *data = lm93_update_device(dev);
2110 return sprintf(buf,"%d\n",data->prochot_max[nr]);
2111}
2112
2113static ssize_t store_prochot_max(struct device *dev,
2114 struct device_attribute *attr,
2115 const char *buf, size_t count)
2116{
2117 int nr = (to_sensor_dev_attr(attr))->index;
2118 struct i2c_client *client = to_i2c_client(dev);
2119 struct lm93_data *data = i2c_get_clientdata(client);
2120 u32 val = simple_strtoul(buf, NULL, 10);
2121
2122 mutex_lock(&data->update_lock);
2123 data->prochot_max[nr] = LM93_PROCHOT_TO_REG(val);
2124 lm93_write_byte(client, LM93_REG_PROCHOT_MAX(nr),
2125 data->prochot_max[nr]);
2126 mutex_unlock(&data->update_lock);
2127 return count;
2128}
2129
2130static SENSOR_DEVICE_ATTR(prochot1_max, S_IWUSR | S_IRUGO,
2131 show_prochot_max, store_prochot_max, 0);
2132static SENSOR_DEVICE_ATTR(prochot2_max, S_IWUSR | S_IRUGO,
2133 show_prochot_max, store_prochot_max, 1);
2134
2135static const u8 prochot_override_mask[] = { 0x80, 0x40 };
2136
2137static ssize_t show_prochot_override(struct device *dev,
2138 struct device_attribute *attr, char *buf)
2139{
2140 int nr = (to_sensor_dev_attr(attr))->index;
2141 struct lm93_data *data = lm93_update_device(dev);
2142 return sprintf(buf,"%d\n",
2143 (data->prochot_override & prochot_override_mask[nr]) ? 1 : 0);
2144}
2145
2146static ssize_t store_prochot_override(struct device *dev,
2147 struct device_attribute *attr,
2148 const char *buf, size_t count)
2149{
2150 int nr = (to_sensor_dev_attr(attr))->index;
2151 struct i2c_client *client = to_i2c_client(dev);
2152 struct lm93_data *data = i2c_get_clientdata(client);
2153 u32 val = simple_strtoul(buf, NULL, 10);
2154
2155 mutex_lock(&data->update_lock);
2156 if (val)
2157 data->prochot_override |= prochot_override_mask[nr];
2158 else
2159 data->prochot_override &= (~prochot_override_mask[nr]);
2160 lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
2161 data->prochot_override);
2162 mutex_unlock(&data->update_lock);
2163 return count;
2164}
2165
2166static SENSOR_DEVICE_ATTR(prochot1_override, S_IWUSR | S_IRUGO,
2167 show_prochot_override, store_prochot_override, 0);
2168static SENSOR_DEVICE_ATTR(prochot2_override, S_IWUSR | S_IRUGO,
2169 show_prochot_override, store_prochot_override, 1);
2170
2171static ssize_t show_prochot_interval(struct device *dev,
2172 struct device_attribute *attr, char *buf)
2173{
2174 int nr = (to_sensor_dev_attr(attr))->index;
2175 struct lm93_data *data = lm93_update_device(dev);
2176 u8 tmp;
2177 if (nr==1)
2178 tmp = (data->prochot_interval & 0xf0) >> 4;
2179 else
2180 tmp = data->prochot_interval & 0x0f;
2181 return sprintf(buf,"%d\n",LM93_INTERVAL_FROM_REG(tmp));
2182}
2183
2184static ssize_t store_prochot_interval(struct device *dev,
2185 struct device_attribute *attr,
2186 const char *buf, size_t count)
2187{
2188 int nr = (to_sensor_dev_attr(attr))->index;
2189 struct i2c_client *client = to_i2c_client(dev);
2190 struct lm93_data *data = i2c_get_clientdata(client);
2191 u32 val = simple_strtoul(buf, NULL, 10);
2192 u8 tmp;
2193
2194 mutex_lock(&data->update_lock);
2195 tmp = lm93_read_byte(client, LM93_REG_PROCHOT_INTERVAL);
2196 if (nr==1)
2197 tmp = (tmp & 0x0f) | (LM93_INTERVAL_TO_REG(val) << 4);
2198 else
2199 tmp = (tmp & 0xf0) | LM93_INTERVAL_TO_REG(val);
2200 data->prochot_interval = tmp;
2201 lm93_write_byte(client, LM93_REG_PROCHOT_INTERVAL, tmp);
2202 mutex_unlock(&data->update_lock);
2203 return count;
2204}
2205
2206static SENSOR_DEVICE_ATTR(prochot1_interval, S_IWUSR | S_IRUGO,
2207 show_prochot_interval, store_prochot_interval, 0);
2208static SENSOR_DEVICE_ATTR(prochot2_interval, S_IWUSR | S_IRUGO,
2209 show_prochot_interval, store_prochot_interval, 1);
2210
2211static ssize_t show_prochot_override_duty_cycle(struct device *dev,
2212 struct device_attribute *attr,
2213 char *buf)
2214{
2215 struct lm93_data *data = lm93_update_device(dev);
2216 return sprintf(buf,"%d\n",data->prochot_override & 0x0f);
2217}
2218
2219static ssize_t store_prochot_override_duty_cycle(struct device *dev,
2220 struct device_attribute *attr,
2221 const char *buf, size_t count)
2222{
2223 struct i2c_client *client = to_i2c_client(dev);
2224 struct lm93_data *data = i2c_get_clientdata(client);
2225 u32 val = simple_strtoul(buf, NULL, 10);
2226
2227 mutex_lock(&data->update_lock);
2228 data->prochot_override = (data->prochot_override & 0xf0) |
2229 SENSORS_LIMIT(val, 0, 15);
2230 lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
2231 data->prochot_override);
2232 mutex_unlock(&data->update_lock);
2233 return count;
2234}
2235
2236static DEVICE_ATTR(prochot_override_duty_cycle, S_IRUGO | S_IWUSR,
2237 show_prochot_override_duty_cycle,
2238 store_prochot_override_duty_cycle);
2239
2240static ssize_t show_prochot_short(struct device *dev,
2241 struct device_attribute *attr, char *buf)
2242{
2243 struct lm93_data *data = lm93_update_device(dev);
2244 return sprintf(buf,"%d\n",(data->config & 0x10) ? 1 : 0);
2245}
2246
2247static ssize_t store_prochot_short(struct device *dev,
2248 struct device_attribute *attr,
2249 const char *buf, size_t count)
2250{
2251 struct i2c_client *client = to_i2c_client(dev);
2252 struct lm93_data *data = i2c_get_clientdata(client);
2253 u32 val = simple_strtoul(buf, NULL, 10);
2254
2255 mutex_lock(&data->update_lock);
2256 if (val)
2257 data->config |= 0x10;
2258 else
2259 data->config &= ~0x10;
2260 lm93_write_byte(client, LM93_REG_CONFIG, data->config);
2261 mutex_unlock(&data->update_lock);
2262 return count;
2263}
2264
2265static DEVICE_ATTR(prochot_short, S_IRUGO | S_IWUSR,
2266 show_prochot_short, store_prochot_short);
2267
2268static ssize_t show_vrdhot(struct device *dev, struct device_attribute *attr,
2269 char *buf)
2270{
2271 int nr = (to_sensor_dev_attr(attr))->index;
2272 struct lm93_data *data = lm93_update_device(dev);
2273 return sprintf(buf,"%d\n",
2274 data->block1.host_status_1 & (1 << (nr+4)) ? 1 : 0);
2275}
2276
2277static SENSOR_DEVICE_ATTR(vrdhot1, S_IRUGO, show_vrdhot, NULL, 0);
2278static SENSOR_DEVICE_ATTR(vrdhot2, S_IRUGO, show_vrdhot, NULL, 1);
2279
2280static ssize_t show_gpio(struct device *dev, struct device_attribute *attr,
2281 char *buf)
2282{
2283 struct lm93_data *data = lm93_update_device(dev);
2284 return sprintf(buf,"%d\n",LM93_GPI_FROM_REG(data->gpi));
2285}
2286
2287static DEVICE_ATTR(gpio, S_IRUGO, show_gpio, NULL);
2288
2289static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
2290 char *buf)
2291{
2292 struct lm93_data *data = lm93_update_device(dev);
2293 return sprintf(buf,"%d\n",LM93_ALARMS_FROM_REG(data->block1));
2294}
2295
2296static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
2297
2298static struct attribute *lm93_attrs[] = {
2299 &sensor_dev_attr_in1_input.dev_attr.attr,
2300 &sensor_dev_attr_in2_input.dev_attr.attr,
2301 &sensor_dev_attr_in3_input.dev_attr.attr,
2302 &sensor_dev_attr_in4_input.dev_attr.attr,
2303 &sensor_dev_attr_in5_input.dev_attr.attr,
2304 &sensor_dev_attr_in6_input.dev_attr.attr,
2305 &sensor_dev_attr_in7_input.dev_attr.attr,
2306 &sensor_dev_attr_in8_input.dev_attr.attr,
2307 &sensor_dev_attr_in9_input.dev_attr.attr,
2308 &sensor_dev_attr_in10_input.dev_attr.attr,
2309 &sensor_dev_attr_in11_input.dev_attr.attr,
2310 &sensor_dev_attr_in12_input.dev_attr.attr,
2311 &sensor_dev_attr_in13_input.dev_attr.attr,
2312 &sensor_dev_attr_in14_input.dev_attr.attr,
2313 &sensor_dev_attr_in15_input.dev_attr.attr,
2314 &sensor_dev_attr_in16_input.dev_attr.attr,
2315 &sensor_dev_attr_in1_min.dev_attr.attr,
2316 &sensor_dev_attr_in2_min.dev_attr.attr,
2317 &sensor_dev_attr_in3_min.dev_attr.attr,
2318 &sensor_dev_attr_in4_min.dev_attr.attr,
2319 &sensor_dev_attr_in5_min.dev_attr.attr,
2320 &sensor_dev_attr_in6_min.dev_attr.attr,
2321 &sensor_dev_attr_in7_min.dev_attr.attr,
2322 &sensor_dev_attr_in8_min.dev_attr.attr,
2323 &sensor_dev_attr_in9_min.dev_attr.attr,
2324 &sensor_dev_attr_in10_min.dev_attr.attr,
2325 &sensor_dev_attr_in11_min.dev_attr.attr,
2326 &sensor_dev_attr_in12_min.dev_attr.attr,
2327 &sensor_dev_attr_in13_min.dev_attr.attr,
2328 &sensor_dev_attr_in14_min.dev_attr.attr,
2329 &sensor_dev_attr_in15_min.dev_attr.attr,
2330 &sensor_dev_attr_in16_min.dev_attr.attr,
2331 &sensor_dev_attr_in1_max.dev_attr.attr,
2332 &sensor_dev_attr_in2_max.dev_attr.attr,
2333 &sensor_dev_attr_in3_max.dev_attr.attr,
2334 &sensor_dev_attr_in4_max.dev_attr.attr,
2335 &sensor_dev_attr_in5_max.dev_attr.attr,
2336 &sensor_dev_attr_in6_max.dev_attr.attr,
2337 &sensor_dev_attr_in7_max.dev_attr.attr,
2338 &sensor_dev_attr_in8_max.dev_attr.attr,
2339 &sensor_dev_attr_in9_max.dev_attr.attr,
2340 &sensor_dev_attr_in10_max.dev_attr.attr,
2341 &sensor_dev_attr_in11_max.dev_attr.attr,
2342 &sensor_dev_attr_in12_max.dev_attr.attr,
2343 &sensor_dev_attr_in13_max.dev_attr.attr,
2344 &sensor_dev_attr_in14_max.dev_attr.attr,
2345 &sensor_dev_attr_in15_max.dev_attr.attr,
2346 &sensor_dev_attr_in16_max.dev_attr.attr,
2347 &sensor_dev_attr_temp1_input.dev_attr.attr,
2348 &sensor_dev_attr_temp2_input.dev_attr.attr,
2349 &sensor_dev_attr_temp3_input.dev_attr.attr,
2350 &sensor_dev_attr_temp1_min.dev_attr.attr,
2351 &sensor_dev_attr_temp2_min.dev_attr.attr,
2352 &sensor_dev_attr_temp3_min.dev_attr.attr,
2353 &sensor_dev_attr_temp1_max.dev_attr.attr,
2354 &sensor_dev_attr_temp2_max.dev_attr.attr,
2355 &sensor_dev_attr_temp3_max.dev_attr.attr,
2356 &sensor_dev_attr_temp1_auto_base.dev_attr.attr,
2357 &sensor_dev_attr_temp2_auto_base.dev_attr.attr,
2358 &sensor_dev_attr_temp3_auto_base.dev_attr.attr,
2359 &sensor_dev_attr_temp1_auto_boost.dev_attr.attr,
2360 &sensor_dev_attr_temp2_auto_boost.dev_attr.attr,
2361 &sensor_dev_attr_temp3_auto_boost.dev_attr.attr,
2362 &sensor_dev_attr_temp1_auto_boost_hyst.dev_attr.attr,
2363 &sensor_dev_attr_temp2_auto_boost_hyst.dev_attr.attr,
2364 &sensor_dev_attr_temp3_auto_boost_hyst.dev_attr.attr,
2365 &sensor_dev_attr_temp1_auto_offset1.dev_attr.attr,
2366 &sensor_dev_attr_temp1_auto_offset2.dev_attr.attr,
2367 &sensor_dev_attr_temp1_auto_offset3.dev_attr.attr,
2368 &sensor_dev_attr_temp1_auto_offset4.dev_attr.attr,
2369 &sensor_dev_attr_temp1_auto_offset5.dev_attr.attr,
2370 &sensor_dev_attr_temp1_auto_offset6.dev_attr.attr,
2371 &sensor_dev_attr_temp1_auto_offset7.dev_attr.attr,
2372 &sensor_dev_attr_temp1_auto_offset8.dev_attr.attr,
2373 &sensor_dev_attr_temp1_auto_offset9.dev_attr.attr,
2374 &sensor_dev_attr_temp1_auto_offset10.dev_attr.attr,
2375 &sensor_dev_attr_temp1_auto_offset11.dev_attr.attr,
2376 &sensor_dev_attr_temp1_auto_offset12.dev_attr.attr,
2377 &sensor_dev_attr_temp2_auto_offset1.dev_attr.attr,
2378 &sensor_dev_attr_temp2_auto_offset2.dev_attr.attr,
2379 &sensor_dev_attr_temp2_auto_offset3.dev_attr.attr,
2380 &sensor_dev_attr_temp2_auto_offset4.dev_attr.attr,
2381 &sensor_dev_attr_temp2_auto_offset5.dev_attr.attr,
2382 &sensor_dev_attr_temp2_auto_offset6.dev_attr.attr,
2383 &sensor_dev_attr_temp2_auto_offset7.dev_attr.attr,
2384 &sensor_dev_attr_temp2_auto_offset8.dev_attr.attr,
2385 &sensor_dev_attr_temp2_auto_offset9.dev_attr.attr,
2386 &sensor_dev_attr_temp2_auto_offset10.dev_attr.attr,
2387 &sensor_dev_attr_temp2_auto_offset11.dev_attr.attr,
2388 &sensor_dev_attr_temp2_auto_offset12.dev_attr.attr,
2389 &sensor_dev_attr_temp3_auto_offset1.dev_attr.attr,
2390 &sensor_dev_attr_temp3_auto_offset2.dev_attr.attr,
2391 &sensor_dev_attr_temp3_auto_offset3.dev_attr.attr,
2392 &sensor_dev_attr_temp3_auto_offset4.dev_attr.attr,
2393 &sensor_dev_attr_temp3_auto_offset5.dev_attr.attr,
2394 &sensor_dev_attr_temp3_auto_offset6.dev_attr.attr,
2395 &sensor_dev_attr_temp3_auto_offset7.dev_attr.attr,
2396 &sensor_dev_attr_temp3_auto_offset8.dev_attr.attr,
2397 &sensor_dev_attr_temp3_auto_offset9.dev_attr.attr,
2398 &sensor_dev_attr_temp3_auto_offset10.dev_attr.attr,
2399 &sensor_dev_attr_temp3_auto_offset11.dev_attr.attr,
2400 &sensor_dev_attr_temp3_auto_offset12.dev_attr.attr,
2401 &sensor_dev_attr_temp1_auto_pwm_min.dev_attr.attr,
2402 &sensor_dev_attr_temp2_auto_pwm_min.dev_attr.attr,
2403 &sensor_dev_attr_temp3_auto_pwm_min.dev_attr.attr,
2404 &sensor_dev_attr_temp1_auto_offset_hyst.dev_attr.attr,
2405 &sensor_dev_attr_temp2_auto_offset_hyst.dev_attr.attr,
2406 &sensor_dev_attr_temp3_auto_offset_hyst.dev_attr.attr,
2407 &sensor_dev_attr_fan1_input.dev_attr.attr,
2408 &sensor_dev_attr_fan2_input.dev_attr.attr,
2409 &sensor_dev_attr_fan3_input.dev_attr.attr,
2410 &sensor_dev_attr_fan4_input.dev_attr.attr,
2411 &sensor_dev_attr_fan1_min.dev_attr.attr,
2412 &sensor_dev_attr_fan2_min.dev_attr.attr,
2413 &sensor_dev_attr_fan3_min.dev_attr.attr,
2414 &sensor_dev_attr_fan4_min.dev_attr.attr,
2415 &sensor_dev_attr_fan1_smart_tach.dev_attr.attr,
2416 &sensor_dev_attr_fan2_smart_tach.dev_attr.attr,
2417 &sensor_dev_attr_fan3_smart_tach.dev_attr.attr,
2418 &sensor_dev_attr_fan4_smart_tach.dev_attr.attr,
2419 &sensor_dev_attr_pwm1.dev_attr.attr,
2420 &sensor_dev_attr_pwm2.dev_attr.attr,
2421 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
2422 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
2423 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
2424 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
2425 &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
2426 &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
2427 &sensor_dev_attr_pwm1_auto_spinup_min.dev_attr.attr,
2428 &sensor_dev_attr_pwm2_auto_spinup_min.dev_attr.attr,
2429 &sensor_dev_attr_pwm1_auto_spinup_time.dev_attr.attr,
2430 &sensor_dev_attr_pwm2_auto_spinup_time.dev_attr.attr,
2431 &dev_attr_pwm_auto_prochot_ramp.attr,
2432 &dev_attr_pwm_auto_vrdhot_ramp.attr,
Jean Delvaree7f62302007-09-04 14:03:43 +0200[diff] [blame]2433 &sensor_dev_attr_cpu0_vid.dev_attr.attr,
2434 &sensor_dev_attr_cpu1_vid.dev_attr.attr,
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2435 &sensor_dev_attr_prochot1.dev_attr.attr,
2436 &sensor_dev_attr_prochot2.dev_attr.attr,
2437 &sensor_dev_attr_prochot1_avg.dev_attr.attr,
2438 &sensor_dev_attr_prochot2_avg.dev_attr.attr,
2439 &sensor_dev_attr_prochot1_max.dev_attr.attr,
2440 &sensor_dev_attr_prochot2_max.dev_attr.attr,
2441 &sensor_dev_attr_prochot1_override.dev_attr.attr,
2442 &sensor_dev_attr_prochot2_override.dev_attr.attr,
2443 &sensor_dev_attr_prochot1_interval.dev_attr.attr,
2444 &sensor_dev_attr_prochot2_interval.dev_attr.attr,
2445 &dev_attr_prochot_override_duty_cycle.attr,
2446 &dev_attr_prochot_short.attr,
2447 &sensor_dev_attr_vrdhot1.dev_attr.attr,
2448 &sensor_dev_attr_vrdhot2.dev_attr.attr,
2449 &dev_attr_gpio.attr,
2450 &dev_attr_alarms.attr,
2451 NULL
2452};
2453
2454static struct attribute_group lm93_attr_grp = {
2455 .attrs = lm93_attrs,
2456};
2457
2458static void lm93_init_client(struct i2c_client *client)
2459{
2460 int i;
2461 u8 reg;
2462
2463 /* configure VID pin input thresholds */
2464 reg = lm93_read_byte(client, LM93_REG_GPI_VID_CTL);
2465 lm93_write_byte(client, LM93_REG_GPI_VID_CTL,
2466 reg | (vid_agtl ? 0x03 : 0x00));
2467
2468 if (init) {
2469 /* enable #ALERT pin */
2470 reg = lm93_read_byte(client, LM93_REG_CONFIG);
2471 lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x08);
2472
2473 /* enable ASF mode for BMC status registers */
2474 reg = lm93_read_byte(client, LM93_REG_STATUS_CONTROL);
2475 lm93_write_byte(client, LM93_REG_STATUS_CONTROL, reg | 0x02);
2476
2477 /* set sleep state to S0 */
2478 lm93_write_byte(client, LM93_REG_SLEEP_CONTROL, 0);
2479
2480 /* unmask #VRDHOT and dynamic VCCP (if nec) error events */
2481 reg = lm93_read_byte(client, LM93_REG_MISC_ERR_MASK);
2482 reg &= ~0x03;
2483 reg &= ~(vccp_limit_type[0] ? 0x10 : 0);
2484 reg &= ~(vccp_limit_type[1] ? 0x20 : 0);
2485 lm93_write_byte(client, LM93_REG_MISC_ERR_MASK, reg);
2486 }
2487
2488 /* start monitoring */
2489 reg = lm93_read_byte(client, LM93_REG_CONFIG);
2490 lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x01);
2491
2492 /* spin until ready */
2493 for (i=0; i<20; i++) {
2494 msleep(10);
2495 if ((lm93_read_byte(client, LM93_REG_CONFIG) & 0x80) == 0x80)
2496 return;
2497 }
2498
2499 dev_warn(&client->dev,"timed out waiting for sensor "
2500 "chip to signal ready!\n");
2501}
2502
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2503/* Return 0 if detection is successful, -ENODEV otherwise */
2504static int lm93_detect(struct i2c_client *client, int kind,
2505 struct i2c_board_info *info)
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2506{
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2507 struct i2c_adapter *adapter = client->adapter;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2508
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2509 if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
2510 return -ENODEV;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2511
2512 /* detection */
2513 if (kind < 0) {
2514 int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
2515
2516 if (mfr != 0x01) {
2517 dev_dbg(&adapter->dev,"detect failed, "
2518 "bad manufacturer id 0x%02x!\n", mfr);
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2519 return -ENODEV;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2520 }
2521 }
2522
2523 if (kind <= 0) {
2524 int ver = lm93_read_byte(client, LM93_REG_VER);
2525
2526 if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
2527 kind = lm93;
2528 } else {
2529 dev_dbg(&adapter->dev,"detect failed, "
2530 "bad version id 0x%02x!\n", ver);
2531 if (kind == 0)
2532 dev_dbg(&adapter->dev,
2533 "(ignored 'force' parameter)\n");
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2534 return -ENODEV;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2535 }
2536 }
2537
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2538 strlcpy(info->type, "lm93", I2C_NAME_SIZE);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2539 dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
2540 client->name, i2c_adapter_id(client->adapter),
2541 client->addr);
2542
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2543 return 0;
2544}
2545
2546static int lm93_probe(struct i2c_client *client,
2547 const struct i2c_device_id *id)
2548{
2549 struct lm93_data *data;
2550 int err, func;
2551 void (*update)(struct lm93_data *, struct i2c_client *);
2552
2553 /* choose update routine based on bus capabilities */
2554 func = i2c_get_functionality(client->adapter);
2555 if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
2556 (!disable_block)) {
2557 dev_dbg(&client->dev, "using SMBus block data transactions\n");
2558 update = lm93_update_client_full;
2559 } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
2560 dev_dbg(&client->dev, "disabled SMBus block data "
2561 "transactions\n");
2562 update = lm93_update_client_min;
2563 } else {
2564 dev_dbg(&client->dev, "detect failed, "
2565 "smbus byte and/or word data not supported!\n");
2566 err = -ENODEV;
2567 goto err_out;
2568 }
2569
2570 data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL);
2571 if (!data) {
2572 dev_dbg(&client->dev, "out of memory!\n");
2573 err = -ENOMEM;
2574 goto err_out;
2575 }
2576 i2c_set_clientdata(client, data);
2577
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2578 /* housekeeping */
2579 data->valid = 0;
2580 data->update = update;
2581 mutex_init(&data->update_lock);
2582
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2583 /* initialize the chip */
2584 lm93_init_client(client);
2585
2586 err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
2587 if (err)
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2588 goto err_free;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2589
2590 /* Register hwmon driver class */
Tony Jones1beeffe2007-08-20 13:46:20 -0700[diff] [blame]2591 data->hwmon_dev = hwmon_device_register(&client->dev);
2592 if ( !IS_ERR(data->hwmon_dev))
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2593 return 0;
2594
Tony Jones1beeffe2007-08-20 13:46:20 -0700[diff] [blame]2595 err = PTR_ERR(data->hwmon_dev);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2596 dev_err(&client->dev, "error registering hwmon device.\n");
2597 sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2598err_free:
2599 kfree(data);
2600err_out:
2601 return err;
2602}
2603
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2604static int lm93_remove(struct i2c_client *client)
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2605{
2606 struct lm93_data *data = i2c_get_clientdata(client);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2607
Tony Jones1beeffe2007-08-20 13:46:20 -0700[diff] [blame]2608 hwmon_device_unregister(data->hwmon_dev);
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2609 sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
2610
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2611 kfree(data);
2612 return 0;
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2613}
2614
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2615static const struct i2c_device_id lm93_id[] = {
2616 { "lm93", lm93 },
2617 { }
2618};
2619MODULE_DEVICE_TABLE(i2c, lm93_id);
2620
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2621static struct i2c_driver lm93_driver = {
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2622 .class = I2C_CLASS_HWMON,
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2623 .driver = {
2624 .name = "lm93",
2625 },
Jean Delvare70b72402008-07-16 19:30:15 +0200[diff] [blame]2626 .probe = lm93_probe,
2627 .remove = lm93_remove,
2628 .id_table = lm93_id,
2629 .detect = lm93_detect,
2630 .address_data = &addr_data,
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200[diff] [blame]2631};
2632
2633static int __init lm93_init(void)
2634{
2635 return i2c_add_driver(&lm93_driver);
2636}
2637
2638static void __exit lm93_exit(void)
2639{
2640 i2c_del_driver(&lm93_driver);
2641}
2642
2643MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
2644 "Hans J. Koch <hjk@linutronix.de");
2645MODULE_DESCRIPTION("LM93 driver");
2646MODULE_LICENSE("GPL");
2647
2648module_init(lm93_init);
2649module_exit(lm93_exit);