| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * Copyright 2003 PMC-Sierra | 
 | 3 |  * Author: Manish Lachwani (lachwani@pmc-sierra.com) | 
 | 4 |  * | 
 | 5 |  *  This program is free software; you can redistribute  it and/or modify it | 
 | 6 |  *  under  the terms of  the GNU General  Public License as published by the | 
 | 7 |  *  Free Software Foundation;  either version 2 of the  License, or (at your | 
 | 8 |  *  option) any later version. | 
 | 9 |  * | 
 | 10 |  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED | 
 | 11 |  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF | 
 | 12 |  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN | 
 | 13 |  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT, | 
 | 14 |  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
 | 15 |  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF | 
 | 16 |  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | 
 | 17 |  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT | 
 | 18 |  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
 | 19 |  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
 | 20 |  * | 
 | 21 |  *  You should have received a copy of the  GNU General Public License along | 
 | 22 |  *  with this program; if not, write  to the Free Software Foundation, Inc., | 
 | 23 |  *  675 Mass Ave, Cambridge, MA 02139, USA. | 
 | 24 |  */ | 
 | 25 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 26 | #include <linux/types.h> | 
 | 27 | #include <linux/pci.h> | 
 | 28 | #include <linux/kernel.h> | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 29 | #include <asm/pci.h> | 
 | 30 | #include <asm/io.h> | 
 | 31 |  | 
 | 32 | #include <linux/init.h> | 
 | 33 | #include <asm/titan_dep.h> | 
 | 34 |  | 
 | 35 | #ifdef CONFIG_HYPERTRANSPORT | 
 | 36 |  | 
 | 37 |  | 
 | 38 | /* | 
 | 39 |  * This function check if the Hypertransport Link Initialization completed. If | 
 | 40 |  * it did, then proceed further with scanning bus #2 | 
 | 41 |  */ | 
 | 42 | static __inline__ int check_titan_htlink(void) | 
 | 43 | { | 
 | 44 |         u32 val; | 
 | 45 |  | 
 | 46 |         val = *(volatile uint32_t *)(RM9000x2_HTLINK_REG); | 
 | 47 |         if (val & 0x00000020) | 
 | 48 |                 /* HT Link Initialization completed */ | 
 | 49 |                 return 1; | 
 | 50 |         else | 
 | 51 |                 return 0; | 
 | 52 | } | 
 | 53 |  | 
 | 54 | static int titan_ht_config_read_dword(struct pci_dev *device, | 
 | 55 |                                              int offset, u32* val) | 
 | 56 | { | 
 | 57 |         int dev, bus, func; | 
 | 58 |         uint32_t address_reg, data_reg; | 
 | 59 |         uint32_t address; | 
 | 60 |  | 
 | 61 |         bus = device->bus->number; | 
 | 62 |         dev = PCI_SLOT(device->devfn); | 
 | 63 |         func = PCI_FUNC(device->devfn); | 
 | 64 |  | 
 | 65 | 	/* XXX Need to change the Bus # */ | 
 | 66 |         if (bus > 2) | 
 | 67 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 68 |                                                         0x80000000 | 0x1; | 
 | 69 |         else | 
 | 70 |                 address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 71 |  | 
 | 72 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 73 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 74 |  | 
 | 75 |         RM9K_WRITE(address_reg, address); | 
 | 76 |         RM9K_READ(data_reg, val); | 
 | 77 |  | 
 | 78 |         return PCIBIOS_SUCCESSFUL; | 
 | 79 | } | 
 | 80 |  | 
 | 81 |  | 
 | 82 | static int titan_ht_config_read_word(struct pci_dev *device, | 
 | 83 |                                              int offset, u16* val) | 
 | 84 | { | 
 | 85 |         int dev, bus, func; | 
 | 86 |         uint32_t address_reg, data_reg; | 
 | 87 |         uint32_t address; | 
 | 88 |  | 
 | 89 |         bus = device->bus->number; | 
 | 90 |         dev = PCI_SLOT(device->devfn); | 
 | 91 |         func = PCI_FUNC(device->devfn); | 
 | 92 |  | 
 | 93 | 	/* XXX Need to change the Bus # */ | 
 | 94 |         if (bus > 2) | 
 | 95 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 96 |                                                 0x80000000 | 0x1; | 
 | 97 |         else | 
 | 98 |                 address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 99 |  | 
 | 100 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 101 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 102 |  | 
 | 103 |         if ((offset & 0x3) == 0) | 
 | 104 |                 offset = 0x2; | 
 | 105 |         else | 
 | 106 |                 offset = 0x0; | 
 | 107 |  | 
 | 108 |         RM9K_WRITE(address_reg, address); | 
 | 109 |         RM9K_READ_16(data_reg + offset, val); | 
 | 110 |  | 
 | 111 |         return PCIBIOS_SUCCESSFUL; | 
 | 112 | } | 
 | 113 |  | 
 | 114 |  | 
 | 115 | u32 longswap(unsigned long l) | 
 | 116 | { | 
| Ralf Baechle | 21a151d | 2007-10-11 23:46:15 +0100 | [diff] [blame] | 117 |         unsigned char b1, b2, b3, b4; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 118 |  | 
 | 119 |         b1 = l&255; | 
 | 120 |         b2 = (l>>8)&255; | 
 | 121 |         b3 = (l>>16)&255; | 
 | 122 |         b4 = (l>>24)&255; | 
 | 123 |  | 
 | 124 |         return ((b1<<24) + (b2<<16) + (b3<<8) + b4); | 
 | 125 | } | 
 | 126 |  | 
 | 127 |  | 
 | 128 | static int titan_ht_config_read_byte(struct pci_dev *device, | 
 | 129 |                                              int offset, u8* val) | 
 | 130 | { | 
 | 131 |         int dev, bus, func; | 
 | 132 |         uint32_t address_reg, data_reg; | 
 | 133 |         uint32_t address; | 
 | 134 |         int offset1; | 
 | 135 |  | 
 | 136 |         bus = device->bus->number; | 
 | 137 |         dev = PCI_SLOT(device->devfn); | 
 | 138 |         func = PCI_FUNC(device->devfn); | 
 | 139 |  | 
 | 140 | 	/* XXX Need to change the Bus # */ | 
 | 141 |         if (bus > 2) | 
 | 142 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 143 |                                                         0x80000000 | 0x1; | 
 | 144 |         else | 
 | 145 |                 address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 146 |  | 
 | 147 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 148 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 149 |  | 
 | 150 |         RM9K_WRITE(address_reg, address); | 
 | 151 |  | 
 | 152 |         if ((offset & 0x3) == 0) { | 
 | 153 |                 offset1 = 0x3; | 
 | 154 |         } | 
 | 155 |         if ((offset & 0x3) == 1) { | 
 | 156 |                 offset1 = 0x2; | 
 | 157 |         } | 
 | 158 |         if ((offset & 0x3) == 2) { | 
 | 159 |                 offset1 = 0x1; | 
 | 160 |         } | 
 | 161 |         if ((offset & 0x3) == 3) { | 
 | 162 |                 offset1 = 0x0; | 
 | 163 |         } | 
 | 164 |         RM9K_READ_8(data_reg + offset1, val); | 
 | 165 |  | 
 | 166 |         return PCIBIOS_SUCCESSFUL; | 
 | 167 | } | 
 | 168 |  | 
 | 169 |  | 
 | 170 | static int titan_ht_config_write_dword(struct pci_dev *device, | 
 | 171 |                                              int offset, u8 val) | 
 | 172 | { | 
 | 173 |         int dev, bus, func; | 
 | 174 |         uint32_t address_reg, data_reg; | 
 | 175 |         uint32_t address; | 
 | 176 |  | 
 | 177 |         bus = device->bus->number; | 
 | 178 |         dev = PCI_SLOT(device->devfn); | 
 | 179 |         func = PCI_FUNC(device->devfn); | 
 | 180 |  | 
 | 181 | 	/* XXX Need to change the Bus # */ | 
 | 182 |         if (bus > 2) | 
 | 183 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 184 |                                                         0x80000000 | 0x1; | 
 | 185 |         else | 
 | 186 |               address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 187 |  | 
 | 188 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 189 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 190 |  | 
 | 191 |         RM9K_WRITE(address_reg, address); | 
 | 192 |         RM9K_WRITE(data_reg, val); | 
 | 193 |  | 
 | 194 |         return PCIBIOS_SUCCESSFUL; | 
 | 195 | } | 
 | 196 |  | 
 | 197 | static int titan_ht_config_write_word(struct pci_dev *device, | 
 | 198 |                                              int offset, u8 val) | 
 | 199 | { | 
 | 200 |         int dev, bus, func; | 
 | 201 |         uint32_t address_reg, data_reg; | 
 | 202 |         uint32_t address; | 
 | 203 |  | 
 | 204 |         bus = device->bus->number; | 
 | 205 |         dev = PCI_SLOT(device->devfn); | 
 | 206 |         func = PCI_FUNC(device->devfn); | 
 | 207 |  | 
 | 208 | 	/* XXX Need to change the Bus # */ | 
 | 209 |         if (bus > 2) | 
 | 210 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 211 |                                 0x80000000 | 0x1; | 
 | 212 |         else | 
 | 213 |                 address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 214 |  | 
 | 215 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 216 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 217 |  | 
 | 218 |         if ((offset & 0x3) == 0) | 
 | 219 |                 offset = 0x2; | 
 | 220 |         else | 
 | 221 |                 offset = 0x0; | 
 | 222 |  | 
 | 223 |         RM9K_WRITE(address_reg, address); | 
 | 224 |         RM9K_WRITE_16(data_reg + offset, val); | 
 | 225 |  | 
 | 226 |         return PCIBIOS_SUCCESSFUL; | 
 | 227 | } | 
 | 228 |  | 
 | 229 | static int titan_ht_config_write_byte(struct pci_dev *device, | 
 | 230 |                                              int offset, u8 val) | 
 | 231 | { | 
 | 232 |         int dev, bus, func; | 
 | 233 |         uint32_t address_reg, data_reg; | 
 | 234 |         uint32_t address; | 
 | 235 |         int offset1; | 
 | 236 |  | 
 | 237 |         bus = device->bus->number; | 
 | 238 |         dev = PCI_SLOT(device->devfn); | 
 | 239 |         func = PCI_FUNC(device->devfn); | 
 | 240 |  | 
 | 241 | 	/* XXX Need to change the Bus # */ | 
 | 242 |         if (bus > 2) | 
 | 243 |                 address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) | | 
 | 244 |                                 0x80000000 | 0x1; | 
 | 245 |         else | 
 | 246 |                 address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000; | 
 | 247 |  | 
 | 248 |         address_reg = RM9000x2_OCD_HTCFGA; | 
 | 249 |         data_reg =  RM9000x2_OCD_HTCFGD; | 
 | 250 |  | 
 | 251 |         RM9K_WRITE(address_reg, address); | 
 | 252 |  | 
 | 253 |         if ((offset & 0x3) == 0) { | 
 | 254 |              offset1 = 0x3; | 
 | 255 |         } | 
 | 256 |         if ((offset & 0x3) == 1) { | 
 | 257 |              offset1 = 0x2; | 
 | 258 |         } | 
 | 259 |         if ((offset & 0x3) == 2) { | 
 | 260 |              offset1 = 0x1; | 
 | 261 |         } | 
 | 262 |         if ((offset & 0x3) == 3) { | 
 | 263 |             offset1 = 0x0; | 
 | 264 |         } | 
 | 265 |  | 
 | 266 |         RM9K_WRITE_8(data_reg + offset1, val); | 
 | 267 |         return PCIBIOS_SUCCESSFUL; | 
 | 268 | } | 
 | 269 |  | 
 | 270 |  | 
 | 271 | static void titan_pcibios_set_master(struct pci_dev *dev) | 
 | 272 | { | 
 | 273 |         u16 cmd; | 
 | 274 |         int bus = dev->bus->number; | 
 | 275 |  | 
 | 276 | 	if (check_titan_htlink()) | 
 | 277 |             titan_ht_config_read_word(dev, PCI_COMMAND, &cmd); | 
 | 278 |  | 
 | 279 | 	cmd |= PCI_COMMAND_MASTER; | 
 | 280 |  | 
 | 281 | 	if (check_titan_htlink()) | 
 | 282 |             titan_ht_config_write_word(dev, PCI_COMMAND, cmd); | 
 | 283 | } | 
 | 284 |  | 
 | 285 |  | 
 | 286 | int pcibios_enable_resources(struct pci_dev *dev) | 
 | 287 | { | 
 | 288 |         u16 cmd, old_cmd; | 
 | 289 |         u8 tmp1; | 
 | 290 |         int idx; | 
 | 291 |         struct resource *r; | 
 | 292 |         int bus = dev->bus->number; | 
 | 293 |  | 
 | 294 | 	if (check_titan_htlink()) | 
 | 295 |             titan_ht_config_read_word(dev, PCI_COMMAND, &cmd); | 
 | 296 |  | 
 | 297 | 	old_cmd = cmd; | 
 | 298 |         for (idx = 0; idx < 6; idx++) { | 
 | 299 |                 r = &dev->resource[idx]; | 
 | 300 |                 if (!r->start && r->end) { | 
 | 301 |                         printk(KERN_ERR | 
 | 302 |                                "PCI: Device %s not available because of " | 
 | 303 |                                "resource collisions\n", pci_name(dev)); | 
 | 304 |                         return -EINVAL; | 
 | 305 |                 } | 
 | 306 |                 if (r->flags & IORESOURCE_IO) | 
 | 307 |                         cmd |= PCI_COMMAND_IO; | 
 | 308 |                 if (r->flags & IORESOURCE_MEM) | 
 | 309 |                         cmd |= PCI_COMMAND_MEMORY; | 
 | 310 |         } | 
 | 311 |         if (cmd != old_cmd) { | 
 | 312 | 		if (check_titan_htlink()) | 
 | 313 |                    titan_ht_config_write_word(dev, PCI_COMMAND, cmd); | 
 | 314 | 	} | 
 | 315 |  | 
 | 316 | 	if (check_titan_htlink()) | 
 | 317 | 		titan_ht_config_read_byte(dev, PCI_CACHE_LINE_SIZE, &tmp1); | 
 | 318 |  | 
 | 319 | 	if (tmp1 != 8) { | 
 | 320 |                 printk(KERN_WARNING "PCI setting cache line size to 8 from " | 
 | 321 |                        "%d\n", tmp1); | 
 | 322 | 	} | 
 | 323 |  | 
 | 324 | 	if (check_titan_htlink()) | 
 | 325 | 		titan_ht_config_write_byte(dev, PCI_CACHE_LINE_SIZE, 8); | 
 | 326 |  | 
 | 327 | 	if (check_titan_htlink()) | 
 | 328 | 		titan_ht_config_read_byte(dev, PCI_LATENCY_TIMER, &tmp1); | 
 | 329 |  | 
 | 330 | 	if (tmp1 < 32 || tmp1 == 0xff) { | 
 | 331 |                 printk(KERN_WARNING "PCI setting latency timer to 32 from %d\n", | 
 | 332 |                        tmp1); | 
 | 333 | 	} | 
 | 334 |  | 
 | 335 | 	if (check_titan_htlink()) | 
 | 336 | 		titan_ht_config_write_byte(dev, PCI_LATENCY_TIMER, 32); | 
 | 337 |  | 
 | 338 | 	return 0; | 
 | 339 | } | 
 | 340 |  | 
 | 341 |  | 
 | 342 | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
 | 343 | { | 
 | 344 |         return pcibios_enable_resources(dev); | 
 | 345 | } | 
 | 346 |  | 
| Dominik Brodowski | 3b7a17f | 2010-01-01 17:40:50 +0100 | [diff] [blame] | 347 | resource_size_t pcibios_align_resource(void *data, const struct resource *res, | 
| Dominik Brodowski | b26b2d4 | 2010-01-01 17:40:49 +0100 | [diff] [blame] | 348 | 				resource_size_t size, resource_size_t align) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 349 | { | 
 | 350 |         struct pci_dev *dev = data; | 
| Dominik Brodowski | b26b2d4 | 2010-01-01 17:40:49 +0100 | [diff] [blame] | 351 | 	resource_size_t start = res->start; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 352 |  | 
 | 353 |         if (res->flags & IORESOURCE_IO) { | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 354 |                 /* We need to avoid collisions with `mirrored' VGA ports | 
 | 355 |                    and other strange ISA hardware, so we always want the | 
 | 356 |                    addresses kilobyte aligned.  */ | 
 | 357 |                 if (size > 0x100) { | 
 | 358 |                         printk(KERN_ERR "PCI: I/O Region %s/%d too large" | 
 | 359 |                                " (%ld bytes)\n", pci_name(dev), | 
 | 360 |                                 dev->resource - res, size); | 
 | 361 |                 } | 
 | 362 |  | 
 | 363 |                 start = (start + 1024 - 1) & ~(1024 - 1); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 364 |         } | 
| Dominik Brodowski | b26b2d4 | 2010-01-01 17:40:49 +0100 | [diff] [blame] | 365 |  | 
 | 366 | 	return start; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 367 | } | 
 | 368 |  | 
 | 369 | struct pci_ops titan_pci_ops = { | 
 | 370 |         titan_ht_config_read_byte, | 
 | 371 |         titan_ht_config_read_word, | 
 | 372 |         titan_ht_config_read_dword, | 
 | 373 |         titan_ht_config_write_byte, | 
 | 374 |         titan_ht_config_write_word, | 
 | 375 |         titan_ht_config_write_dword | 
 | 376 | }; | 
 | 377 |  | 
 | 378 | void __init pcibios_fixup_bus(struct pci_bus *c) | 
 | 379 | { | 
 | 380 |         titan_ht_pcibios_fixup_bus(c); | 
 | 381 | } | 
 | 382 |  | 
 | 383 | void __init pcibios_init(void) | 
 | 384 | { | 
 | 385 |  | 
 | 386 |         /* Reset PCI I/O and PCI MEM values */ | 
 | 387 | 	/* XXX Need to add the proper values here */ | 
 | 388 |         ioport_resource.start = 0xe0000000; | 
 | 389 |         ioport_resource.end   = 0xe0000000 + 0x20000000 - 1; | 
 | 390 |         iomem_resource.start  = 0xc0000000; | 
 | 391 |         iomem_resource.end    = 0xc0000000 + 0x20000000 - 1; | 
 | 392 |  | 
 | 393 | 	/* XXX Need to add bus values */ | 
 | 394 |         pci_scan_bus(2, &titan_pci_ops, NULL); | 
 | 395 |         pci_scan_bus(3, &titan_pci_ops, NULL); | 
 | 396 | } | 
 | 397 |  | 
 | 398 | /* | 
 | 399 |  * for parsing "pci=" kernel boot arguments. | 
 | 400 |  */ | 
 | 401 | char *pcibios_setup(char *str) | 
 | 402 | { | 
 | 403 |         printk(KERN_INFO "rr: pcibios_setup\n"); | 
 | 404 |         /* Nothing to do for now.  */ | 
 | 405 |  | 
 | 406 |         return str; | 
 | 407 | } | 
 | 408 |  | 
 | 409 | unsigned __init int pcibios_assign_all_busses(void) | 
 | 410 | { | 
 | 411 |         /* We want to use the PCI bus detection done by PMON */ | 
 | 412 |         return 0; | 
 | 413 | } | 
 | 414 |  | 
 | 415 | #endif /* CONFIG_HYPERTRANSPORT */ |