| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /****************************************************************************** | 
|  | 2 | *  speedtch.c  -  Alcatel SpeedTouch USB xDSL modem driver | 
|  | 3 | * | 
|  | 4 | *  Copyright (C) 2001, Alcatel | 
|  | 5 | *  Copyright (C) 2003, Duncan Sands | 
|  | 6 | *  Copyright (C) 2004, David Woodhouse | 
|  | 7 | * | 
|  | 8 | *  This program is free software; you can redistribute it and/or modify it | 
|  | 9 | *  under the terms of the GNU General Public License as published by the Free | 
|  | 10 | *  Software Foundation; either version 2 of the License, or (at your option) | 
|  | 11 | *  any later version. | 
|  | 12 | * | 
|  | 13 | *  This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | 14 | *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | 15 | *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | 16 | *  more details. | 
|  | 17 | * | 
|  | 18 | *  You should have received a copy of the GNU General Public License along with | 
|  | 19 | *  this program; if not, write to the Free Software Foundation, Inc., 59 | 
|  | 20 | *  Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
|  | 21 | * | 
|  | 22 | ******************************************************************************/ | 
|  | 23 |  | 
|  | 24 | #include <linux/module.h> | 
|  | 25 | #include <linux/moduleparam.h> | 
|  | 26 | #include <linux/gfp.h> | 
|  | 27 | #include <linux/kernel.h> | 
|  | 28 | #include <linux/sched.h> | 
|  | 29 | #include <linux/timer.h> | 
|  | 30 | #include <linux/errno.h> | 
|  | 31 | #include <linux/proc_fs.h> | 
|  | 32 | #include <linux/slab.h> | 
|  | 33 | #include <linux/wait.h> | 
|  | 34 | #include <linux/list.h> | 
|  | 35 | #include <asm/processor.h> | 
|  | 36 | #include <asm/uaccess.h> | 
|  | 37 | #include <linux/smp_lock.h> | 
|  | 38 | #include <linux/interrupt.h> | 
|  | 39 | #include <linux/atm.h> | 
|  | 40 | #include <linux/atmdev.h> | 
|  | 41 | #include <linux/crc32.h> | 
|  | 42 | #include <linux/init.h> | 
|  | 43 | #include <linux/firmware.h> | 
|  | 44 |  | 
|  | 45 | #include "usb_atm.h" | 
|  | 46 |  | 
|  | 47 | #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) | 
|  | 48 | #	define USE_FW_LOADER | 
|  | 49 | #endif | 
|  | 50 |  | 
|  | 51 | #define DRIVER_AUTHOR	"Johan Verrept, Duncan Sands <duncan.sands@free.fr>" | 
|  | 52 | #define DRIVER_VERSION	"1.8" | 
|  | 53 | #define DRIVER_DESC	"Alcatel SpeedTouch USB driver version " DRIVER_VERSION | 
|  | 54 |  | 
|  | 55 | static const char speedtch_driver_name[] = "speedtch"; | 
|  | 56 |  | 
|  | 57 | #define SPEEDTOUCH_VENDORID		0x06b9 | 
|  | 58 | #define SPEEDTOUCH_PRODUCTID		0x4061 | 
|  | 59 |  | 
|  | 60 | /* Timeout in jiffies */ | 
|  | 61 | #define CTRL_TIMEOUT 2000 | 
|  | 62 | #define DATA_TIMEOUT 2000 | 
|  | 63 |  | 
|  | 64 | #define OFFSET_7  0		/* size 1 */ | 
|  | 65 | #define OFFSET_b  1		/* size 8 */ | 
|  | 66 | #define OFFSET_d  9		/* size 4 */ | 
|  | 67 | #define OFFSET_e 13		/* size 1 */ | 
|  | 68 | #define OFFSET_f 14		/* size 1 */ | 
|  | 69 | #define TOTAL    15 | 
|  | 70 |  | 
|  | 71 | #define SIZE_7 1 | 
|  | 72 | #define SIZE_b 8 | 
|  | 73 | #define SIZE_d 4 | 
|  | 74 | #define SIZE_e 1 | 
|  | 75 | #define SIZE_f 1 | 
|  | 76 |  | 
|  | 77 | static int dl_512_first = 0; | 
|  | 78 | static int sw_buffering = 0; | 
|  | 79 |  | 
|  | 80 | module_param(dl_512_first, bool, 0444); | 
|  | 81 | MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware"); | 
|  | 82 |  | 
|  | 83 | module_param(sw_buffering, uint, 0444); | 
|  | 84 | MODULE_PARM_DESC(sw_buffering, "Enable software buffering"); | 
|  | 85 |  | 
|  | 86 | #define UDSL_IOCTL_LINE_UP		1 | 
|  | 87 | #define UDSL_IOCTL_LINE_DOWN		2 | 
|  | 88 |  | 
|  | 89 | #define SPEEDTCH_ENDPOINT_INT		0x81 | 
|  | 90 | #define SPEEDTCH_ENDPOINT_DATA		0x07 | 
|  | 91 | #define SPEEDTCH_ENDPOINT_FIRMWARE	0x05 | 
|  | 92 |  | 
|  | 93 | #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) ) | 
|  | 94 |  | 
|  | 95 | static struct usb_device_id speedtch_usb_ids[] = { | 
|  | 96 | {USB_DEVICE(SPEEDTOUCH_VENDORID, SPEEDTOUCH_PRODUCTID)}, | 
|  | 97 | {} | 
|  | 98 | }; | 
|  | 99 |  | 
|  | 100 | MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); | 
|  | 101 |  | 
|  | 102 | struct speedtch_instance_data { | 
|  | 103 | struct udsl_instance_data u; | 
|  | 104 |  | 
|  | 105 | /* Status */ | 
|  | 106 | struct urb *int_urb; | 
|  | 107 | unsigned char int_data[16]; | 
|  | 108 | struct work_struct poll_work; | 
|  | 109 | struct timer_list poll_timer; | 
|  | 110 | }; | 
|  | 111 | /* USB */ | 
|  | 112 |  | 
|  | 113 | static int speedtch_usb_probe(struct usb_interface *intf, | 
|  | 114 | const struct usb_device_id *id); | 
|  | 115 | static void speedtch_usb_disconnect(struct usb_interface *intf); | 
|  | 116 | static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code, | 
|  | 117 | void *user_data); | 
|  | 118 | static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs); | 
|  | 119 | static void speedtch_poll_status(struct speedtch_instance_data *instance); | 
|  | 120 |  | 
|  | 121 | static struct usb_driver speedtch_usb_driver = { | 
|  | 122 | .owner		= THIS_MODULE, | 
|  | 123 | .name		= speedtch_driver_name, | 
|  | 124 | .probe		= speedtch_usb_probe, | 
|  | 125 | .disconnect	= speedtch_usb_disconnect, | 
|  | 126 | .ioctl		= speedtch_usb_ioctl, | 
|  | 127 | .id_table	= speedtch_usb_ids, | 
|  | 128 | }; | 
|  | 129 |  | 
|  | 130 | /*************** | 
|  | 131 | **  firmware  ** | 
|  | 132 | ***************/ | 
|  | 133 |  | 
|  | 134 | static void speedtch_got_firmware(struct speedtch_instance_data *instance, | 
|  | 135 | int got_it) | 
|  | 136 | { | 
|  | 137 | int err; | 
|  | 138 | struct usb_interface *intf; | 
|  | 139 |  | 
|  | 140 | down(&instance->u.serialize);	/* vs self, speedtch_firmware_start */ | 
|  | 141 | if (instance->u.status == UDSL_LOADED_FIRMWARE) | 
|  | 142 | goto out; | 
|  | 143 | if (!got_it) { | 
|  | 144 | instance->u.status = UDSL_NO_FIRMWARE; | 
|  | 145 | goto out; | 
|  | 146 | } | 
|  | 147 | if ((err = usb_set_interface(instance->u.usb_dev, 1, 1)) < 0) { | 
|  | 148 | dbg("speedtch_got_firmware: usb_set_interface returned %d!", err); | 
|  | 149 | instance->u.status = UDSL_NO_FIRMWARE; | 
|  | 150 | goto out; | 
|  | 151 | } | 
|  | 152 |  | 
|  | 153 | /* Set up interrupt endpoint */ | 
|  | 154 | intf = usb_ifnum_to_if(instance->u.usb_dev, 0); | 
|  | 155 | if (intf && !usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) { | 
|  | 156 |  | 
|  | 157 | instance->int_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | 158 | if (instance->int_urb) { | 
|  | 159 |  | 
|  | 160 | usb_fill_int_urb(instance->int_urb, instance->u.usb_dev, | 
|  | 161 | usb_rcvintpipe(instance->u.usb_dev, SPEEDTCH_ENDPOINT_INT), | 
|  | 162 | instance->int_data, | 
|  | 163 | sizeof(instance->int_data), | 
|  | 164 | speedtch_handle_int, instance, 50); | 
|  | 165 | err = usb_submit_urb(instance->int_urb, GFP_KERNEL); | 
|  | 166 | if (err) { | 
|  | 167 | /* Doesn't matter; we'll poll anyway */ | 
|  | 168 | dbg("speedtch_got_firmware: Submission of interrupt URB failed %d", err); | 
|  | 169 | usb_free_urb(instance->int_urb); | 
|  | 170 | instance->int_urb = NULL; | 
|  | 171 | usb_driver_release_interface(&speedtch_usb_driver, intf); | 
|  | 172 | } | 
|  | 173 | } | 
|  | 174 | } | 
|  | 175 | /* Start status polling */ | 
|  | 176 | mod_timer(&instance->poll_timer, jiffies + (1 * HZ)); | 
|  | 177 |  | 
|  | 178 | instance->u.status = UDSL_LOADED_FIRMWARE; | 
|  | 179 | tasklet_schedule(&instance->u.receive_tasklet); | 
|  | 180 | out: | 
|  | 181 | up(&instance->u.serialize); | 
|  | 182 | wake_up_interruptible(&instance->u.firmware_waiters); | 
|  | 183 | } | 
|  | 184 |  | 
|  | 185 | static int speedtch_set_swbuff(struct speedtch_instance_data *instance, | 
|  | 186 | int state) | 
|  | 187 | { | 
|  | 188 | struct usb_device *dev = instance->u.usb_dev; | 
|  | 189 | int ret; | 
|  | 190 |  | 
|  | 191 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 192 | 0x32, 0x40, state ? 0x01 : 0x00, | 
|  | 193 | 0x00, NULL, 0, 100); | 
|  | 194 | if (ret < 0) { | 
|  | 195 | printk("Warning: %sabling SW buffering: usb_control_msg returned %d\n", | 
|  | 196 | state ? "En" : "Dis", ret); | 
|  | 197 | return ret; | 
|  | 198 | } | 
|  | 199 |  | 
|  | 200 | dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis"); | 
|  | 201 | return 0; | 
|  | 202 | } | 
|  | 203 |  | 
|  | 204 | static void speedtch_test_sequence(struct speedtch_instance_data *instance) | 
|  | 205 | { | 
|  | 206 | struct usb_device *dev = instance->u.usb_dev; | 
|  | 207 | unsigned char buf[10]; | 
|  | 208 | int ret; | 
|  | 209 |  | 
|  | 210 | /* URB 147 */ | 
|  | 211 | buf[0] = 0x1c; | 
|  | 212 | buf[1] = 0x50; | 
|  | 213 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 214 | 0x01, 0x40, 0x0b, 0x00, buf, 2, 100); | 
|  | 215 | if (ret < 0) | 
|  | 216 | printk(KERN_WARNING "%s failed on URB147: %d\n", __func__, ret); | 
|  | 217 |  | 
|  | 218 | /* URB 148 */ | 
|  | 219 | buf[0] = 0x32; | 
|  | 220 | buf[1] = 0x00; | 
|  | 221 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 222 | 0x01, 0x40, 0x02, 0x00, buf, 2, 100); | 
|  | 223 | if (ret < 0) | 
|  | 224 | printk(KERN_WARNING "%s failed on URB148: %d\n", __func__, ret); | 
|  | 225 |  | 
|  | 226 | /* URB 149 */ | 
|  | 227 | buf[0] = 0x01; | 
|  | 228 | buf[1] = 0x00; | 
|  | 229 | buf[2] = 0x01; | 
|  | 230 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 231 | 0x01, 0x40, 0x03, 0x00, buf, 3, 100); | 
|  | 232 | if (ret < 0) | 
|  | 233 | printk(KERN_WARNING "%s failed on URB149: %d\n", __func__, ret); | 
|  | 234 |  | 
|  | 235 | /* URB 150 */ | 
|  | 236 | buf[0] = 0x01; | 
|  | 237 | buf[1] = 0x00; | 
|  | 238 | buf[2] = 0x01; | 
|  | 239 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 240 | 0x01, 0x40, 0x04, 0x00, buf, 3, 100); | 
|  | 241 | if (ret < 0) | 
|  | 242 | printk(KERN_WARNING "%s failed on URB150: %d\n", __func__, ret); | 
|  | 243 | } | 
|  | 244 |  | 
|  | 245 | static int speedtch_start_synchro(struct speedtch_instance_data *instance) | 
|  | 246 | { | 
|  | 247 | struct usb_device *dev = instance->u.usb_dev; | 
|  | 248 | unsigned char buf[2]; | 
|  | 249 | int ret; | 
|  | 250 |  | 
|  | 251 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 252 | 0x12, 0xc0, 0x04, 0x00, | 
|  | 253 | buf, sizeof(buf), CTRL_TIMEOUT); | 
|  | 254 | if (ret < 0) { | 
|  | 255 | printk(KERN_WARNING "SpeedTouch: Failed to start ADSL synchronisation: %d\n", ret); | 
|  | 256 | return ret; | 
|  | 257 | } | 
|  | 258 |  | 
|  | 259 | dbg("speedtch_start_synchro: modem prodded. %d Bytes returned: %02x %02x", ret, buf[0], buf[1]); | 
|  | 260 | return 0; | 
|  | 261 | } | 
|  | 262 |  | 
|  | 263 | static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs) | 
|  | 264 | { | 
|  | 265 | struct speedtch_instance_data *instance = urb->context; | 
|  | 266 | unsigned int count = urb->actual_length; | 
|  | 267 | int ret; | 
|  | 268 |  | 
|  | 269 | /* The magic interrupt for "up state" */ | 
|  | 270 | const static unsigned char up_int[6]   = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 }; | 
|  | 271 | /* The magic interrupt for "down state" */ | 
|  | 272 | const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 }; | 
|  | 273 |  | 
|  | 274 | switch (urb->status) { | 
|  | 275 | case 0: | 
|  | 276 | /* success */ | 
|  | 277 | break; | 
|  | 278 | case -ECONNRESET: | 
|  | 279 | case -ENOENT: | 
|  | 280 | case -ESHUTDOWN: | 
|  | 281 | /* this urb is terminated; clean up */ | 
|  | 282 | dbg("%s - urb shutting down with status: %d", __func__, urb->status); | 
|  | 283 | return; | 
|  | 284 | default: | 
|  | 285 | dbg("%s - nonzero urb status received: %d", __func__, urb->status); | 
|  | 286 | goto exit; | 
|  | 287 | } | 
|  | 288 |  | 
|  | 289 | if (count < 6) { | 
|  | 290 | dbg("%s - int packet too short", __func__); | 
|  | 291 | goto exit; | 
|  | 292 | } | 
|  | 293 |  | 
|  | 294 | if (!memcmp(up_int, instance->int_data, 6)) { | 
|  | 295 | del_timer(&instance->poll_timer); | 
|  | 296 | printk(KERN_NOTICE "DSL line goes up\n"); | 
|  | 297 | } else if (!memcmp(down_int, instance->int_data, 6)) { | 
|  | 298 | printk(KERN_NOTICE "DSL line goes down\n"); | 
|  | 299 | } else { | 
|  | 300 | int i; | 
|  | 301 |  | 
|  | 302 | printk(KERN_DEBUG "Unknown interrupt packet of %d bytes:", count); | 
|  | 303 | for (i = 0; i < count; i++) | 
|  | 304 | printk(" %02x", instance->int_data[i]); | 
|  | 305 | printk("\n"); | 
|  | 306 | } | 
|  | 307 | schedule_work(&instance->poll_work); | 
|  | 308 |  | 
|  | 309 | exit: | 
|  | 310 | rmb(); | 
|  | 311 | if (!instance->int_urb) | 
|  | 312 | return; | 
|  | 313 |  | 
|  | 314 | ret = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | 315 | if (ret) | 
|  | 316 | err("%s - usb_submit_urb failed with result %d", __func__, ret); | 
|  | 317 | } | 
|  | 318 |  | 
|  | 319 | static int speedtch_get_status(struct speedtch_instance_data *instance, | 
|  | 320 | unsigned char *buf) | 
|  | 321 | { | 
|  | 322 | struct usb_device *dev = instance->u.usb_dev; | 
|  | 323 | int ret; | 
|  | 324 |  | 
|  | 325 | memset(buf, 0, TOTAL); | 
|  | 326 |  | 
|  | 327 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 328 | 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7, | 
|  | 329 | CTRL_TIMEOUT); | 
|  | 330 | if (ret < 0) { | 
|  | 331 | dbg("MSG 7 failed"); | 
|  | 332 | return ret; | 
|  | 333 | } | 
|  | 334 |  | 
|  | 335 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 336 | 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b, | 
|  | 337 | CTRL_TIMEOUT); | 
|  | 338 | if (ret < 0) { | 
|  | 339 | dbg("MSG B failed"); | 
|  | 340 | return ret; | 
|  | 341 | } | 
|  | 342 |  | 
|  | 343 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 344 | 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d, | 
|  | 345 | CTRL_TIMEOUT); | 
|  | 346 | if (ret < 0) { | 
|  | 347 | dbg("MSG D failed"); | 
|  | 348 | return ret; | 
|  | 349 | } | 
|  | 350 |  | 
|  | 351 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 352 | 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e, | 
|  | 353 | CTRL_TIMEOUT); | 
|  | 354 | if (ret < 0) { | 
|  | 355 | dbg("MSG E failed"); | 
|  | 356 | return ret; | 
|  | 357 | } | 
|  | 358 |  | 
|  | 359 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 360 | 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f, | 
|  | 361 | CTRL_TIMEOUT); | 
|  | 362 | if (ret < 0) { | 
|  | 363 | dbg("MSG F failed"); | 
|  | 364 | return ret; | 
|  | 365 | } | 
|  | 366 |  | 
|  | 367 | return 0; | 
|  | 368 | } | 
|  | 369 |  | 
|  | 370 | static void speedtch_poll_status(struct speedtch_instance_data *instance) | 
|  | 371 | { | 
|  | 372 | unsigned char buf[TOTAL]; | 
|  | 373 | int ret; | 
|  | 374 |  | 
|  | 375 | ret = speedtch_get_status(instance, buf); | 
|  | 376 | if (ret) { | 
|  | 377 | printk(KERN_WARNING | 
|  | 378 | "SpeedTouch: Error %d fetching device status\n", ret); | 
|  | 379 | return; | 
|  | 380 | } | 
|  | 381 |  | 
|  | 382 | dbg("Line state %02x", buf[OFFSET_7]); | 
|  | 383 |  | 
|  | 384 | switch (buf[OFFSET_7]) { | 
|  | 385 | case 0: | 
|  | 386 | if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { | 
|  | 387 | instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; | 
|  | 388 | printk(KERN_NOTICE "ADSL line is down\n"); | 
|  | 389 | } | 
|  | 390 | break; | 
|  | 391 |  | 
|  | 392 | case 0x08: | 
|  | 393 | if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { | 
|  | 394 | instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN; | 
|  | 395 | printk(KERN_NOTICE "ADSL line is blocked?\n"); | 
|  | 396 | } | 
|  | 397 | break; | 
|  | 398 |  | 
|  | 399 | case 0x10: | 
|  | 400 | if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { | 
|  | 401 | instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; | 
|  | 402 | printk(KERN_NOTICE "ADSL line is synchronising\n"); | 
|  | 403 | } | 
|  | 404 | break; | 
|  | 405 |  | 
|  | 406 | case 0x20: | 
|  | 407 | if (instance->u.atm_dev->signal != ATM_PHY_SIG_FOUND) { | 
|  | 408 | int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) | 
|  | 409 | | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24); | 
|  | 410 | int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) | 
|  | 411 | | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24); | 
|  | 412 |  | 
|  | 413 | if (!(down_speed & 0x0000ffff) && | 
|  | 414 | !(up_speed & 0x0000ffff)) { | 
|  | 415 | down_speed >>= 16; | 
|  | 416 | up_speed >>= 16; | 
|  | 417 | } | 
|  | 418 | instance->u.atm_dev->link_rate = down_speed * 1000 / 424; | 
|  | 419 | instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND; | 
|  | 420 |  | 
|  | 421 | printk(KERN_NOTICE | 
|  | 422 | "ADSL line is up (%d Kib/s down | %d Kib/s up)\n", | 
|  | 423 | down_speed, up_speed); | 
|  | 424 | } | 
|  | 425 | break; | 
|  | 426 |  | 
|  | 427 | default: | 
|  | 428 | if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { | 
|  | 429 | instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN; | 
|  | 430 | printk(KERN_NOTICE "Unknown line state %02x\n", buf[OFFSET_7]); | 
|  | 431 | } | 
|  | 432 | break; | 
|  | 433 | } | 
|  | 434 | } | 
|  | 435 |  | 
|  | 436 | static void speedtch_timer_poll(unsigned long data) | 
|  | 437 | { | 
|  | 438 | struct speedtch_instance_data *instance = (void *)data; | 
|  | 439 |  | 
|  | 440 | schedule_work(&instance->poll_work); | 
|  | 441 | mod_timer(&instance->poll_timer, jiffies + (5 * HZ)); | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | #ifdef USE_FW_LOADER | 
|  | 445 | static void speedtch_upload_firmware(struct speedtch_instance_data *instance, | 
|  | 446 | const struct firmware *fw1, | 
|  | 447 | const struct firmware *fw2) | 
|  | 448 | { | 
|  | 449 | unsigned char *buffer; | 
|  | 450 | struct usb_device *usb_dev = instance->u.usb_dev; | 
|  | 451 | struct usb_interface *intf; | 
|  | 452 | int actual_length, ret; | 
|  | 453 | int offset; | 
|  | 454 |  | 
|  | 455 | dbg("speedtch_upload_firmware"); | 
|  | 456 |  | 
|  | 457 | if (!(intf = usb_ifnum_to_if(usb_dev, 2))) { | 
|  | 458 | dbg("speedtch_upload_firmware: interface not found!"); | 
|  | 459 | goto fail; | 
|  | 460 | } | 
|  | 461 |  | 
|  | 462 | if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) { | 
|  | 463 | dbg("speedtch_upload_firmware: no memory for buffer!"); | 
|  | 464 | goto fail; | 
|  | 465 | } | 
|  | 466 |  | 
|  | 467 | /* A user-space firmware loader may already have claimed interface #2 */ | 
|  | 468 | if ((ret = | 
|  | 469 | usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) < 0) { | 
|  | 470 | dbg("speedtch_upload_firmware: interface in use (%d)!", ret); | 
|  | 471 | goto fail_free; | 
|  | 472 | } | 
|  | 473 |  | 
|  | 474 | /* URB 7 */ | 
|  | 475 | if (dl_512_first) {	/* some modems need a read before writing the firmware */ | 
|  | 476 | ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), | 
|  | 477 | buffer, 0x200, &actual_length, 2000); | 
|  | 478 |  | 
|  | 479 | if (ret < 0 && ret != -ETIMEDOUT) | 
|  | 480 | dbg("speedtch_upload_firmware: read BLOCK0 from modem failed (%d)!", ret); | 
|  | 481 | else | 
|  | 482 | dbg("speedtch_upload_firmware: BLOCK0 downloaded (%d bytes)", ret); | 
|  | 483 | } | 
|  | 484 |  | 
|  | 485 | /* URB 8 : both leds are static green */ | 
|  | 486 | for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) { | 
|  | 487 | int thislen = min_t(int, PAGE_SIZE, fw1->size - offset); | 
|  | 488 | memcpy(buffer, fw1->data + offset, thislen); | 
|  | 489 |  | 
|  | 490 | ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), | 
|  | 491 | buffer, thislen, &actual_length, DATA_TIMEOUT); | 
|  | 492 |  | 
|  | 493 | if (ret < 0) { | 
|  | 494 | dbg("speedtch_upload_firmware: write BLOCK1 to modem failed (%d)!", ret); | 
|  | 495 | goto fail_release; | 
|  | 496 | } | 
|  | 497 | dbg("speedtch_upload_firmware: BLOCK1 uploaded (%zu bytes)", fw1->size); | 
|  | 498 | } | 
|  | 499 |  | 
|  | 500 | /* USB led blinking green, ADSL led off */ | 
|  | 501 |  | 
|  | 502 | /* URB 11 */ | 
|  | 503 | ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), | 
|  | 504 | buffer, 0x200, &actual_length, DATA_TIMEOUT); | 
|  | 505 |  | 
|  | 506 | if (ret < 0) { | 
|  | 507 | dbg("speedtch_upload_firmware: read BLOCK2 from modem failed (%d)!", ret); | 
|  | 508 | goto fail_release; | 
|  | 509 | } | 
|  | 510 | dbg("speedtch_upload_firmware: BLOCK2 downloaded (%d bytes)", actual_length); | 
|  | 511 |  | 
|  | 512 | /* URBs 12 to 139 - USB led blinking green, ADSL led off */ | 
|  | 513 | for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) { | 
|  | 514 | int thislen = min_t(int, PAGE_SIZE, fw2->size - offset); | 
|  | 515 | memcpy(buffer, fw2->data + offset, thislen); | 
|  | 516 |  | 
|  | 517 | ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), | 
|  | 518 | buffer, thislen, &actual_length, DATA_TIMEOUT); | 
|  | 519 |  | 
|  | 520 | if (ret < 0) { | 
|  | 521 | dbg("speedtch_upload_firmware: write BLOCK3 to modem failed (%d)!", ret); | 
|  | 522 | goto fail_release; | 
|  | 523 | } | 
|  | 524 | } | 
|  | 525 | dbg("speedtch_upload_firmware: BLOCK3 uploaded (%zu bytes)", fw2->size); | 
|  | 526 |  | 
|  | 527 | /* USB led static green, ADSL led static red */ | 
|  | 528 |  | 
|  | 529 | /* URB 142 */ | 
|  | 530 | ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), | 
|  | 531 | buffer, 0x200, &actual_length, DATA_TIMEOUT); | 
|  | 532 |  | 
|  | 533 | if (ret < 0) { | 
|  | 534 | dbg("speedtch_upload_firmware: read BLOCK4 from modem failed (%d)!", ret); | 
|  | 535 | goto fail_release; | 
|  | 536 | } | 
|  | 537 |  | 
|  | 538 | /* success */ | 
|  | 539 | dbg("speedtch_upload_firmware: BLOCK4 downloaded (%d bytes)", actual_length); | 
|  | 540 |  | 
|  | 541 | /* Delay to allow firmware to start up. We can do this here | 
|  | 542 | because we're in our own kernel thread anyway. */ | 
|  | 543 | msleep(1000); | 
|  | 544 |  | 
|  | 545 | /* Enable software buffering, if requested */ | 
|  | 546 | if (sw_buffering) | 
|  | 547 | speedtch_set_swbuff(instance, 1); | 
|  | 548 |  | 
|  | 549 | /* Magic spell; don't ask us what this does */ | 
|  | 550 | speedtch_test_sequence(instance); | 
|  | 551 |  | 
|  | 552 | /* Start modem synchronisation */ | 
|  | 553 | if (speedtch_start_synchro(instance)) | 
|  | 554 | dbg("speedtch_start_synchro: failed"); | 
|  | 555 |  | 
|  | 556 | speedtch_got_firmware(instance, 1); | 
|  | 557 |  | 
|  | 558 | free_page((unsigned long)buffer); | 
|  | 559 | return; | 
|  | 560 |  | 
|  | 561 | fail_release: | 
|  | 562 | /* Only release interface #2 if uploading failed; we don't release it | 
|  | 563 | we succeeded.  This prevents the userspace tools from trying to load | 
|  | 564 | the firmware themselves */ | 
|  | 565 | usb_driver_release_interface(&speedtch_usb_driver, intf); | 
|  | 566 | fail_free: | 
|  | 567 | free_page((unsigned long)buffer); | 
|  | 568 | fail: | 
|  | 569 | speedtch_got_firmware(instance, 0); | 
|  | 570 | } | 
|  | 571 |  | 
|  | 572 | static int speedtch_find_firmware(struct speedtch_instance_data | 
|  | 573 | *instance, int phase, | 
|  | 574 | const struct firmware **fw_p) | 
|  | 575 | { | 
|  | 576 | char buf[24]; | 
|  | 577 | const u16 bcdDevice = le16_to_cpu(instance->u.usb_dev->descriptor.bcdDevice); | 
|  | 578 | const u8 major_revision = bcdDevice >> 8; | 
|  | 579 | const u8 minor_revision = bcdDevice & 0xff; | 
|  | 580 |  | 
|  | 581 | sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision); | 
|  | 582 | dbg("speedtch_find_firmware: looking for %s", buf); | 
|  | 583 |  | 
|  | 584 | if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) { | 
|  | 585 | sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision); | 
|  | 586 | dbg("speedtch_find_firmware: looking for %s", buf); | 
|  | 587 |  | 
|  | 588 | if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) { | 
|  | 589 | sprintf(buf, "speedtch-%d.bin", phase); | 
|  | 590 | dbg("speedtch_find_firmware: looking for %s", buf); | 
|  | 591 |  | 
|  | 592 | if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) { | 
|  | 593 | dev_warn(&instance->u.usb_dev->dev, "no stage %d firmware found!", phase); | 
|  | 594 | return -ENOENT; | 
|  | 595 | } | 
|  | 596 | } | 
|  | 597 | } | 
|  | 598 |  | 
|  | 599 | dev_info(&instance->u.usb_dev->dev, "found stage %d firmware %s\n", phase, buf); | 
|  | 600 |  | 
|  | 601 | return 0; | 
|  | 602 | } | 
|  | 603 |  | 
|  | 604 | static int speedtch_load_firmware(void *arg) | 
|  | 605 | { | 
|  | 606 | const struct firmware *fw1, *fw2; | 
|  | 607 | struct speedtch_instance_data *instance = arg; | 
|  | 608 |  | 
|  | 609 | BUG_ON(!instance); | 
|  | 610 |  | 
|  | 611 | daemonize("firmware/speedtch"); | 
|  | 612 |  | 
|  | 613 | if (!speedtch_find_firmware(instance, 1, &fw1)) { | 
|  | 614 | if (!speedtch_find_firmware(instance, 2, &fw2)) { | 
|  | 615 | speedtch_upload_firmware(instance, fw1, fw2); | 
|  | 616 | release_firmware(fw2); | 
|  | 617 | } | 
|  | 618 | release_firmware(fw1); | 
|  | 619 | } | 
|  | 620 |  | 
|  | 621 | /* In case we failed, set state back to NO_FIRMWARE so that | 
|  | 622 | another later attempt may work. Otherwise, we never actually | 
|  | 623 | manage to recover if, for example, the firmware is on /usr and | 
|  | 624 | we look for it too early. */ | 
|  | 625 | speedtch_got_firmware(instance, 0); | 
|  | 626 |  | 
|  | 627 | module_put(THIS_MODULE); | 
|  | 628 | udsl_put_instance(&instance->u); | 
|  | 629 | return 0; | 
|  | 630 | } | 
|  | 631 | #endif /* USE_FW_LOADER */ | 
|  | 632 |  | 
|  | 633 | static void speedtch_firmware_start(struct speedtch_instance_data *instance) | 
|  | 634 | { | 
|  | 635 | #ifdef USE_FW_LOADER | 
|  | 636 | int ret; | 
|  | 637 | #endif | 
|  | 638 |  | 
|  | 639 | dbg("speedtch_firmware_start"); | 
|  | 640 |  | 
|  | 641 | down(&instance->u.serialize);	/* vs self, speedtch_got_firmware */ | 
|  | 642 |  | 
|  | 643 | if (instance->u.status >= UDSL_LOADING_FIRMWARE) { | 
|  | 644 | up(&instance->u.serialize); | 
|  | 645 | return; | 
|  | 646 | } | 
|  | 647 |  | 
|  | 648 | instance->u.status = UDSL_LOADING_FIRMWARE; | 
|  | 649 | up(&instance->u.serialize); | 
|  | 650 |  | 
|  | 651 | #ifdef USE_FW_LOADER | 
|  | 652 | udsl_get_instance(&instance->u); | 
|  | 653 | try_module_get(THIS_MODULE); | 
|  | 654 |  | 
|  | 655 | ret = kernel_thread(speedtch_load_firmware, instance, | 
|  | 656 | CLONE_FS | CLONE_FILES); | 
|  | 657 |  | 
|  | 658 | if (ret >= 0) | 
|  | 659 | return;		/* OK */ | 
|  | 660 |  | 
|  | 661 | dbg("speedtch_firmware_start: kernel_thread failed (%d)!", ret); | 
|  | 662 |  | 
|  | 663 | module_put(THIS_MODULE); | 
|  | 664 | udsl_put_instance(&instance->u); | 
|  | 665 | /* Just pretend it never happened... hope modem_run happens */ | 
|  | 666 | #endif				/* USE_FW_LOADER */ | 
|  | 667 |  | 
|  | 668 | speedtch_got_firmware(instance, 0); | 
|  | 669 | } | 
|  | 670 |  | 
|  | 671 | static int speedtch_firmware_wait(struct udsl_instance_data *instance) | 
|  | 672 | { | 
|  | 673 | speedtch_firmware_start((void *)instance); | 
|  | 674 |  | 
|  | 675 | if (wait_event_interruptible(instance->firmware_waiters, instance->status != UDSL_LOADING_FIRMWARE) < 0) | 
|  | 676 | return -ERESTARTSYS; | 
|  | 677 |  | 
|  | 678 | return (instance->status == UDSL_LOADED_FIRMWARE) ? 0 : -EAGAIN; | 
|  | 679 | } | 
|  | 680 |  | 
|  | 681 | /********** | 
|  | 682 | **  USB  ** | 
|  | 683 | **********/ | 
|  | 684 |  | 
|  | 685 | static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code, | 
|  | 686 | void *user_data) | 
|  | 687 | { | 
|  | 688 | struct speedtch_instance_data *instance = usb_get_intfdata(intf); | 
|  | 689 |  | 
|  | 690 | dbg("speedtch_usb_ioctl entered"); | 
|  | 691 |  | 
|  | 692 | if (!instance) { | 
|  | 693 | dbg("speedtch_usb_ioctl: NULL instance!"); | 
|  | 694 | return -ENODEV; | 
|  | 695 | } | 
|  | 696 |  | 
|  | 697 | switch (code) { | 
|  | 698 | case UDSL_IOCTL_LINE_UP: | 
|  | 699 | instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND; | 
|  | 700 | speedtch_got_firmware(instance, 1); | 
|  | 701 | return (instance->u.status == UDSL_LOADED_FIRMWARE) ? 0 : -EIO; | 
|  | 702 | case UDSL_IOCTL_LINE_DOWN: | 
|  | 703 | instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; | 
|  | 704 | return 0; | 
|  | 705 | default: | 
|  | 706 | return -ENOTTY; | 
|  | 707 | } | 
|  | 708 | } | 
|  | 709 |  | 
|  | 710 | static int speedtch_usb_probe(struct usb_interface *intf, | 
|  | 711 | const struct usb_device_id *id) | 
|  | 712 | { | 
|  | 713 | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | 714 | int ifnum = intf->altsetting->desc.bInterfaceNumber; | 
|  | 715 | struct speedtch_instance_data *instance; | 
|  | 716 | unsigned char mac_str[13]; | 
|  | 717 | int ret, i; | 
|  | 718 | char buf7[SIZE_7]; | 
|  | 719 |  | 
|  | 720 | dbg("speedtch_usb_probe: trying device with vendor=0x%x, product=0x%x, ifnum %d", | 
|  | 721 | le16_to_cpu(dev->descriptor.idVendor), | 
|  | 722 | le16_to_cpu(dev->descriptor.idProduct), ifnum); | 
|  | 723 |  | 
|  | 724 | if ((dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) || | 
|  | 725 | (ifnum != 1)) | 
|  | 726 | return -ENODEV; | 
|  | 727 |  | 
|  | 728 | dbg("speedtch_usb_probe: device accepted"); | 
|  | 729 |  | 
|  | 730 | /* instance init */ | 
|  | 731 | instance = kmalloc(sizeof(*instance), GFP_KERNEL); | 
|  | 732 | if (!instance) { | 
|  | 733 | dbg("speedtch_usb_probe: no memory for instance data!"); | 
|  | 734 | return -ENOMEM; | 
|  | 735 | } | 
|  | 736 |  | 
|  | 737 | memset(instance, 0, sizeof(struct speedtch_instance_data)); | 
|  | 738 |  | 
|  | 739 | if ((ret = usb_set_interface(dev, 0, 0)) < 0) | 
|  | 740 | goto fail; | 
|  | 741 |  | 
|  | 742 | if ((ret = usb_set_interface(dev, 2, 0)) < 0) | 
|  | 743 | goto fail; | 
|  | 744 |  | 
|  | 745 | instance->u.data_endpoint = SPEEDTCH_ENDPOINT_DATA; | 
|  | 746 | instance->u.firmware_wait = speedtch_firmware_wait; | 
|  | 747 | instance->u.driver_name = speedtch_driver_name; | 
|  | 748 |  | 
|  | 749 | ret = udsl_instance_setup(dev, &instance->u); | 
|  | 750 | if (ret) | 
|  | 751 | goto fail; | 
|  | 752 |  | 
|  | 753 | init_timer(&instance->poll_timer); | 
|  | 754 | instance->poll_timer.function = speedtch_timer_poll; | 
|  | 755 | instance->poll_timer.data = (unsigned long)instance; | 
|  | 756 |  | 
|  | 757 | INIT_WORK(&instance->poll_work, (void *)speedtch_poll_status, instance); | 
|  | 758 |  | 
|  | 759 | /* set MAC address, it is stored in the serial number */ | 
|  | 760 | memset(instance->u.atm_dev->esi, 0, sizeof(instance->u.atm_dev->esi)); | 
|  | 761 | if (usb_string(dev, dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) { | 
|  | 762 | for (i = 0; i < 6; i++) | 
|  | 763 | instance->u.atm_dev->esi[i] = | 
|  | 764 | (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1])); | 
|  | 765 | } | 
|  | 766 |  | 
|  | 767 | /* First check whether the modem already seems to be alive */ | 
|  | 768 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 769 | 0x12, 0xc0, 0x07, 0x00, buf7, SIZE_7, 500); | 
|  | 770 |  | 
|  | 771 | if (ret == SIZE_7) { | 
|  | 772 | dbg("firmware appears to be already loaded"); | 
|  | 773 | speedtch_got_firmware(instance, 1); | 
|  | 774 | speedtch_poll_status(instance); | 
|  | 775 | } else { | 
|  | 776 | speedtch_firmware_start(instance); | 
|  | 777 | } | 
|  | 778 |  | 
|  | 779 | usb_set_intfdata(intf, instance); | 
|  | 780 |  | 
|  | 781 | return 0; | 
|  | 782 |  | 
|  | 783 | fail: | 
|  | 784 | kfree(instance); | 
|  | 785 |  | 
|  | 786 | return -ENOMEM; | 
|  | 787 | } | 
|  | 788 |  | 
|  | 789 | static void speedtch_usb_disconnect(struct usb_interface *intf) | 
|  | 790 | { | 
|  | 791 | struct speedtch_instance_data *instance = usb_get_intfdata(intf); | 
|  | 792 |  | 
|  | 793 | dbg("speedtch_usb_disconnect entered"); | 
|  | 794 |  | 
|  | 795 | if (!instance) { | 
|  | 796 | dbg("speedtch_usb_disconnect: NULL instance!"); | 
|  | 797 | return; | 
|  | 798 | } | 
|  | 799 |  | 
|  | 800 | /*QQ need to handle disconnects on interface #2 while uploading firmware */ | 
|  | 801 | /*QQ and what about interface #1? */ | 
|  | 802 |  | 
|  | 803 | if (instance->int_urb) { | 
|  | 804 | struct urb *int_urb = instance->int_urb; | 
|  | 805 | instance->int_urb = NULL; | 
|  | 806 | wmb(); | 
|  | 807 | usb_unlink_urb(int_urb); | 
|  | 808 | usb_free_urb(int_urb); | 
|  | 809 | } | 
|  | 810 |  | 
|  | 811 | instance->int_data[0] = 1; | 
|  | 812 | del_timer_sync(&instance->poll_timer); | 
|  | 813 | wmb(); | 
|  | 814 | flush_scheduled_work(); | 
|  | 815 |  | 
|  | 816 | udsl_instance_disconnect(&instance->u); | 
|  | 817 |  | 
|  | 818 | /* clean up */ | 
|  | 819 | usb_set_intfdata(intf, NULL); | 
|  | 820 | udsl_put_instance(&instance->u); | 
|  | 821 | } | 
|  | 822 |  | 
|  | 823 | /*********** | 
|  | 824 | **  init  ** | 
|  | 825 | ***********/ | 
|  | 826 |  | 
|  | 827 | static int __init speedtch_usb_init(void) | 
|  | 828 | { | 
|  | 829 | dbg("speedtch_usb_init: driver version " DRIVER_VERSION); | 
|  | 830 |  | 
|  | 831 | return usb_register(&speedtch_usb_driver); | 
|  | 832 | } | 
|  | 833 |  | 
|  | 834 | static void __exit speedtch_usb_cleanup(void) | 
|  | 835 | { | 
|  | 836 | dbg("speedtch_usb_cleanup entered"); | 
|  | 837 |  | 
|  | 838 | usb_deregister(&speedtch_usb_driver); | 
|  | 839 | } | 
|  | 840 |  | 
|  | 841 | module_init(speedtch_usb_init); | 
|  | 842 | module_exit(speedtch_usb_cleanup); | 
|  | 843 |  | 
|  | 844 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
|  | 845 | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | 846 | MODULE_LICENSE("GPL"); | 
|  | 847 | MODULE_VERSION(DRIVER_VERSION); |