| Daniel Drake | fd8bacc | 2007-06-09 19:07:14 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | 3 | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | 4 | * | 
|  | 5 | * This program is free software; you can redistribute it and/or modify | 
|  | 6 | * it under the terms of the GNU General Public License version 2 as | 
|  | 7 | * published by the Free Software Foundation. | 
|  | 8 | */ | 
|  | 9 |  | 
|  | 10 | /* | 
|  | 11 | * This regulatory domain control implementation is known to be incomplete | 
|  | 12 | * and confusing. mac80211 regulatory domain control will be significantly | 
|  | 13 | * reworked in the not-too-distant future. | 
|  | 14 | * | 
|  | 15 | * For now, drivers wishing to control which channels are and aren't available | 
|  | 16 | * are advised as follows: | 
|  | 17 | *  - set the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag | 
|  | 18 | *  - continue to include *ALL* possible channels in the modes registered | 
|  | 19 | *    through ieee80211_register_hwmode() | 
|  | 20 | *  - for each allowable ieee80211_channel structure registered in the above | 
|  | 21 | *    call, set the flag member to some meaningful value such as | 
|  | 22 | *    IEEE80211_CHAN_W_SCAN | IEEE80211_CHAN_W_ACTIVE_SCAN | | 
|  | 23 | *    IEEE80211_CHAN_W_IBSS. | 
|  | 24 | *  - leave flag as 0 for non-allowable channels | 
|  | 25 | * | 
|  | 26 | * The usual implementation is for a driver to read a device EEPROM to | 
|  | 27 | * determine which regulatory domain it should be operating under, then | 
|  | 28 | * looking up the allowable channels in a driver-local table, then performing | 
|  | 29 | * the above. | 
|  | 30 | */ | 
|  | 31 |  | 
|  | 32 | #include <linux/module.h> | 
|  | 33 | #include <linux/netdevice.h> | 
|  | 34 | #include <net/mac80211.h> | 
| Johannes Berg | 8b8857a | 2007-06-22 00:16:14 +0200 | [diff] [blame] | 35 | #include "ieee80211_i.h" | 
| Daniel Drake | fd8bacc | 2007-06-09 19:07:14 +0100 | [diff] [blame] | 36 |  | 
|  | 37 | static int ieee80211_regdom = 0x10; /* FCC */ | 
|  | 38 | module_param(ieee80211_regdom, int, 0444); | 
|  | 39 | MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK"); | 
|  | 40 |  | 
|  | 41 | /* | 
|  | 42 | * If firmware is upgraded by the vendor, additional channels can be used based | 
|  | 43 | * on the new Japanese regulatory rules. This is indicated by setting | 
|  | 44 | * ieee80211_japan_5ghz module parameter to one when loading the 80211 kernel | 
|  | 45 | * module. | 
|  | 46 | */ | 
|  | 47 | static int ieee80211_japan_5ghz /* = 0 */; | 
|  | 48 | module_param(ieee80211_japan_5ghz, int, 0444); | 
|  | 49 | MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz"); | 
|  | 50 |  | 
|  | 51 |  | 
|  | 52 | struct ieee80211_channel_range { | 
|  | 53 | short start_freq; | 
|  | 54 | short end_freq; | 
|  | 55 | unsigned char power_level; | 
|  | 56 | unsigned char antenna_max; | 
|  | 57 | }; | 
|  | 58 |  | 
|  | 59 | static const struct ieee80211_channel_range ieee80211_fcc_channels[] = { | 
|  | 60 | { 2412, 2462, 27, 6 } /* IEEE 802.11b/g, channels 1..11 */, | 
|  | 61 | { 5180, 5240, 17, 6 } /* IEEE 802.11a, channels 36..48 */, | 
|  | 62 | { 5260, 5320, 23, 6 } /* IEEE 802.11a, channels 52..64 */, | 
|  | 63 | { 5745, 5825, 30, 6 } /* IEEE 802.11a, channels 149..165, outdoor */, | 
|  | 64 | { 0 } | 
|  | 65 | }; | 
|  | 66 |  | 
|  | 67 | static const struct ieee80211_channel_range ieee80211_mkk_channels[] = { | 
|  | 68 | { 2412, 2472, 20, 6 } /* IEEE 802.11b/g, channels 1..13 */, | 
|  | 69 | { 5170, 5240, 20, 6 } /* IEEE 802.11a, channels 34..48 */, | 
|  | 70 | { 5260, 5320, 20, 6 } /* IEEE 802.11a, channels 52..64 */, | 
|  | 71 | { 0 } | 
|  | 72 | }; | 
|  | 73 |  | 
|  | 74 |  | 
|  | 75 | static const struct ieee80211_channel_range *channel_range = | 
|  | 76 | ieee80211_fcc_channels; | 
|  | 77 |  | 
|  | 78 |  | 
|  | 79 | static void ieee80211_unmask_channel(int mode, struct ieee80211_channel *chan) | 
|  | 80 | { | 
|  | 81 | int i; | 
|  | 82 |  | 
|  | 83 | chan->flag = 0; | 
|  | 84 |  | 
| Daniel Drake | fd8bacc | 2007-06-09 19:07:14 +0100 | [diff] [blame] | 85 | for (i = 0; channel_range[i].start_freq; i++) { | 
|  | 86 | const struct ieee80211_channel_range *r = &channel_range[i]; | 
|  | 87 | if (r->start_freq <= chan->freq && r->end_freq >= chan->freq) { | 
|  | 88 | if (ieee80211_regdom == 64 && !ieee80211_japan_5ghz && | 
|  | 89 | chan->freq >= 5260 && chan->freq <= 5320) { | 
|  | 90 | /* | 
|  | 91 | * Skip new channels in Japan since the | 
|  | 92 | * firmware was not marked having been upgraded | 
|  | 93 | * by the vendor. | 
|  | 94 | */ | 
|  | 95 | continue; | 
|  | 96 | } | 
|  | 97 |  | 
|  | 98 | if (ieee80211_regdom == 0x10 && | 
|  | 99 | (chan->freq == 5190 || chan->freq == 5210 || | 
|  | 100 | chan->freq == 5230)) { | 
|  | 101 | /* Skip MKK channels when in FCC domain. */ | 
|  | 102 | continue; | 
|  | 103 | } | 
|  | 104 |  | 
|  | 105 | chan->flag |= IEEE80211_CHAN_W_SCAN | | 
|  | 106 | IEEE80211_CHAN_W_ACTIVE_SCAN | | 
|  | 107 | IEEE80211_CHAN_W_IBSS; | 
|  | 108 | chan->power_level = r->power_level; | 
|  | 109 | chan->antenna_max = r->antenna_max; | 
|  | 110 |  | 
|  | 111 | if (ieee80211_regdom == 64 && | 
|  | 112 | (chan->freq == 5170 || chan->freq == 5190 || | 
|  | 113 | chan->freq == 5210 || chan->freq == 5230)) { | 
|  | 114 | /* | 
|  | 115 | * New regulatory rules in Japan have backwards | 
|  | 116 | * compatibility with old channels in 5.15-5.25 | 
|  | 117 | * GHz band, but the station is not allowed to | 
|  | 118 | * use active scan on these old channels. | 
|  | 119 | */ | 
|  | 120 | chan->flag &= ~IEEE80211_CHAN_W_ACTIVE_SCAN; | 
|  | 121 | } | 
|  | 122 |  | 
|  | 123 | if (ieee80211_regdom == 64 && | 
|  | 124 | (chan->freq == 5260 || chan->freq == 5280 || | 
|  | 125 | chan->freq == 5300 || chan->freq == 5320)) { | 
|  | 126 | /* | 
|  | 127 | * IBSS is not allowed on 5.25-5.35 GHz band | 
|  | 128 | * due to radar detection requirements. | 
|  | 129 | */ | 
|  | 130 | chan->flag &= ~IEEE80211_CHAN_W_IBSS; | 
|  | 131 | } | 
|  | 132 |  | 
|  | 133 | break; | 
|  | 134 | } | 
|  | 135 | } | 
|  | 136 | } | 
|  | 137 |  | 
|  | 138 |  | 
|  | 139 | void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode) | 
|  | 140 | { | 
|  | 141 | int c; | 
|  | 142 | for (c = 0; c < mode->num_channels; c++) | 
|  | 143 | ieee80211_unmask_channel(mode->mode, &mode->channels[c]); | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 |  | 
|  | 147 | void ieee80211_regdomain_init(void) | 
|  | 148 | { | 
|  | 149 | if (ieee80211_regdom == 0x40) | 
|  | 150 | channel_range = ieee80211_mkk_channels; | 
|  | 151 | } | 
|  | 152 |  |