arch/arm/mach-s3c2440/mach-rx1950.c

/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
 *
 * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
 * Copyright (c) 2007-2010 Vasily Khoruzhick
 *
 * based on smdk2440 written by Ben Dooks
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/memblock.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/sysdev.h>
#include <linux/pwm_backlight.h>
#include <linux/pwm.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

#include <linux/mmc/host.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>

#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/h1940.h>
#include <mach/fb.h>

#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-iic.h>
#include <plat/mci.h>
#include <plat/udc.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
#include <plat/ts.h>

#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353

static struct map_desc rx1950_iodesc[] __initdata = {
};

static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
	[0] = {
	       .name = "fclk",
	       .divisor = 0x0a,
	       .min_baud = 0,
	       .max_baud = 0,
	},
};

static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
	[0] = {
	       .hwport = 0,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x03,
	       .ufcon = 0x51,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
	[1] = {
	       .hwport = 1,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x03,
	       .ufcon = 0x51,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
	/* IR port */
	[2] = {
	       .hwport = 2,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x43,
	       .ufcon = 0xf1,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
};

static struct s3c2410fb_display rx1950_display = {
	.type = S3C2410_LCDCON1_TFT,
	.width = 240,
	.height = 320,
	.xres = 240,
	.yres = 320,
	.bpp = 16,

	.pixclock = 260000,
	.left_margin = 10,
	.right_margin = 20,
	.hsync_len = 10,
	.upper_margin = 2,
	.lower_margin = 2,
	.vsync_len = 2,

	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
			   S3C2410_LCDCON5_INVVCLK |
			   S3C2410_LCDCON5_INVVLINE |
			   S3C2410_LCDCON5_INVVFRAME |
			   S3C2410_LCDCON5_HWSWP |
			   (0x02 << 13) |
			   (0x02 << 15),

};

static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
	.displays = &rx1950_display,
	.num_displays = 1,
	.default_display = 0,

	.lpcsel = 0x02,
	.gpccon = 0xaa9556a9,
	.gpccon_mask = 0xffc003fc,
	.gpcup = 0x0000ffff,
	.gpcup_mask = 0xffffffff,

	.gpdcon = 0xaa90aaa1,
	.gpdcon_mask = 0xffc0fff0,
	.gpdup = 0x0000fcfd,
	.gpdup_mask = 0xffffffff,

};

static struct pwm_device *lcd_pwm;

void rx1950_lcd_power(int enable)
{
	int i;
	static int enabled;
	if (enabled == enable)
		return;
	if (!enable) {

		/* GPC11-GPC15->OUTPUT */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPC(i), 1);

		/* Wait a bit here... */
		mdelay(100);

		/* GPD2-GPD7->OUTPUT */
		/* GPD11-GPD15->OUTPUT */
		/* GPD2-GPD7->1, GPD11-GPD15->1 */
		for (i = 2; i < 8; i++)
			gpio_direction_output(S3C2410_GPD(i), 1);
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPD(i), 1);

		/* Wait a bit here...*/
		mdelay(100);

		/* GPB0->OUTPUT, GPB0->0 */
		gpio_direction_output(S3C2410_GPB(0), 0);

		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
		for (i = 1; i < 5; i++)
			gpio_direction_output(S3C2410_GPC(i), 0);

		/* GPC15-GPC11->0 */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPC(i), 0);

		/* GPD15-GPD11->0, GPD2->GPD7->0 */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPD(i), 0);

		for (i = 2; i < 8; i++)
			gpio_direction_output(S3C2410_GPD(i), 0);

		/* GPC6->0, GPC7->0, GPC5->0 */
		gpio_direction_output(S3C2410_GPC(6), 0);
		gpio_direction_output(S3C2410_GPC(7), 0);
		gpio_direction_output(S3C2410_GPC(5), 0);

		/* GPB1->OUTPUT, GPB1->0 */
		gpio_direction_output(S3C2410_GPB(1), 0);
		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
		pwm_disable(lcd_pwm);

		/* GPC0->0, GPC10->0 */
		gpio_direction_output(S3C2410_GPC(0), 0);
		gpio_direction_output(S3C2410_GPC(10), 0);
	} else {
		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
		pwm_enable(lcd_pwm);

		gpio_direction_output(S3C2410_GPC(0), 1);
		gpio_direction_output(S3C2410_GPC(5), 1);

		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
		gpio_direction_output(S3C2410_GPC(7), 1);

		for (i = 1; i < 5; i++)
			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

		for (i = 11; i < 16; i++)
			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

		for (i = 2; i < 8; i++)
			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

		for (i = 11; i < 16; i++)
			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

		gpio_direction_output(S3C2410_GPC(10), 1);
		gpio_direction_output(S3C2410_GPC(6), 1);
	}
	enabled = enable;
}

static void rx1950_bl_power(int enable)
{
	static int enabled;
	if (enabled == enable)
		return;
	if (!enable) {
			gpio_direction_output(S3C2410_GPB(0), 0);
	} else {
			/* LED driver need a "push" to power on */
			gpio_direction_output(S3C2410_GPB(0), 1);
			/* Warm up backlight for one period of PWM.
			 * Without this trick its almost impossible to
			 * enable backlight with low brightness value
			 */
			ndelay(48000);
			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
	}
	enabled = enable;
}

static int rx1950_backlight_init(struct device *dev)
{
	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
	lcd_pwm = pwm_request(1, "RX1950 LCD");
	if (IS_ERR(lcd_pwm)) {
		dev_err(dev, "Unable to request PWM for LCD power!\n");
		return PTR_ERR(lcd_pwm);
	}

	rx1950_lcd_power(1);
	rx1950_bl_power(1);

	return 0;
}

static void rx1950_backlight_exit(struct device *dev)
{
	rx1950_bl_power(0);
	rx1950_lcd_power(0);

	pwm_free(lcd_pwm);
	gpio_free(S3C2410_GPB(0));
}


static int rx1950_backlight_notify(struct device *dev, int brightness)
{
	if (!brightness) {
		rx1950_bl_power(0);
		rx1950_lcd_power(0);
	} else {
		rx1950_lcd_power(1);
		rx1950_bl_power(1);
	}
	return brightness;
}

static struct platform_pwm_backlight_data rx1950_backlight_data = {
	.pwm_id = 0,
	.max_brightness = 24,
	.dft_brightness = 4,
	.pwm_period_ns = 48000,
	.init = rx1950_backlight_init,
	.notify = rx1950_backlight_notify,
	.exit = rx1950_backlight_exit,
};

static struct platform_device rx1950_backlight = {
	.name = "pwm-backlight",
	.dev = {
		.parent = &s3c_device_timer[0].dev,
		.platform_data = &rx1950_backlight_data,
	},
};

static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
	switch (power_mode) {
	case MMC_POWER_OFF:
		gpio_direction_output(S3C2410_GPJ(1), 0);
		break;
	case MMC_POWER_UP:
	case MMC_POWER_ON:
		gpio_direction_output(S3C2410_GPJ(1), 1);
		break;
	default:
		break;
	}
}

static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
	.gpio_detect = S3C2410_GPF(5),
	.gpio_wprotect = S3C2410_GPH(8),
	.set_power = rx1950_set_mmc_power,
	.ocr_avail = MMC_VDD_32_33,
};

static struct mtd_partition rx1950_nand_part[] = {
	[0] = {
			.name = "Boot0",
			.offset = 0,
			.size = 0x4000,
			.mask_flags = MTD_WRITEABLE,
	},
	[1] = {
			.name = "Boot1",
			.offset = MTDPART_OFS_APPEND,
			.size = 0x40000,
			.mask_flags = MTD_WRITEABLE,
	},
	[2] = {
			.name = "Kernel",
			.offset = MTDPART_OFS_APPEND,
			.size = 0x300000,
			.mask_flags = 0,
	},
	[3] = {
			.name = "Filesystem",
			.offset = MTDPART_OFS_APPEND,
			.size = MTDPART_SIZ_FULL,
			.mask_flags = 0,
	},
};

static struct s3c2410_nand_set rx1950_nand_sets[] = {
	[0] = {
			.name = "Internal",
			.nr_chips = 1,
			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
			.partitions = rx1950_nand_part,
	},
};

static struct s3c2410_platform_nand rx1950_nand_info = {
	.tacls = 25,
	.twrph0 = 50,
	.twrph1 = 15,
	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
	.sets = rx1950_nand_sets,
};

static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
	switch (cmd) {
	case S3C2410_UDC_P_ENABLE:
		gpio_direction_output(S3C2410_GPJ(5), 1);
		break;
	case S3C2410_UDC_P_DISABLE:
		gpio_direction_output(S3C2410_GPJ(5), 0);
		break;
	case S3C2410_UDC_P_RESET:
		break;
	default:
		break;
	}
}

static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
	.udc_command = rx1950_udc_pullup,
	.vbus_pin = S3C2410_GPG(5),
	.vbus_pin_inverted = 1,
};

static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
	.delay = 10000,
	.presc = 49,
	.oversampling_shift = 3,
};

static struct gpio_keys_button rx1950_gpio_keys_table[] = {
	{
		.code		= KEY_POWER,
		.gpio		= S3C2410_GPF(0),
		.active_low	= 1,
		.desc		= "Power button",
		.wakeup		= 1,
	},
	{
		.code		= KEY_F5,
		.gpio		= S3C2410_GPF(7),
		.active_low	= 1,
		.desc		= "Record button",
	},
	{
		.code		= KEY_F1,
		.gpio		= S3C2410_GPG(0),
		.active_low	= 1,
		.desc		= "Calendar button",
	},
	{
		.code		= KEY_F2,
		.gpio		= S3C2410_GPG(2),
		.active_low	= 1,
		.desc		= "Contacts button",
	},
	{
		.code		= KEY_F3,
		.gpio		= S3C2410_GPG(3),
		.active_low	= 1,
		.desc		= "Mail button",
	},
	{
		.code		= KEY_F4,
		.gpio		= S3C2410_GPG(7),
		.active_low	= 1,
		.desc		= "WLAN button",
	},
	{
		.code		= KEY_LEFT,
		.gpio		= S3C2410_GPG(10),
		.active_low	= 1,
		.desc		= "Left button",
	},
	{
		.code		= KEY_RIGHT,
		.gpio		= S3C2410_GPG(11),
		.active_low	= 1,
		.desc		= "Right button",
	},
	{
		.code		= KEY_UP,
		.gpio		= S3C2410_GPG(4),
		.active_low	= 1,
		.desc		= "Up button",
	},
	{
		.code		= KEY_DOWN,
		.gpio		= S3C2410_GPG(6),
		.active_low	= 1,
		.desc		= "Down button",
	},
	{
		.code		= KEY_ENTER,
		.gpio		= S3C2410_GPG(9),
		.active_low	= 1,
		.desc		= "Ok button"
	},
};

static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
	.buttons = rx1950_gpio_keys_table,
	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
};

static struct platform_device rx1950_device_gpiokeys = {
	.name = "gpio-keys",
	.dev.platform_data = &rx1950_gpio_keys_data,
};

static struct s3c2410_platform_i2c rx1950_i2c_data = {
	.flags = 0,
	.slave_addr = 0x42,
	.frequency = 400 * 1000,
	.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
};

static struct platform_device *rx1950_devices[] __initdata = {
	&s3c_device_lcd,
	&s3c_device_wdt,
	&s3c_device_i2c0,
	&s3c_device_iis,
	&s3c_device_usbgadget,
	&s3c_device_rtc,
	&s3c_device_nand,
	&s3c_device_sdi,
	&s3c_device_adc,
	&s3c_device_ts,
	&s3c_device_timer[0],
	&s3c_device_timer[1],
	&rx1950_backlight,
	&rx1950_device_gpiokeys,
};

static struct clk *rx1950_clocks[] __initdata = {
	&s3c24xx_clkout0,
	&s3c24xx_clkout1,
};

static void __init rx1950_map_io(void)
{
	s3c24xx_clkout0.parent  = &clk_h;
	s3c24xx_clkout1.parent  = &clk_f;

	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));

	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
	s3c24xx_init_clocks(16934000);
	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));

	/* setup PM */

#ifdef CONFIG_PM_H1940
	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
#endif

	s3c_pm_init();
}

static void __init rx1950_init_machine(void)
{
	int i;

	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
	s3c_i2c0_set_platdata(&rx1950_i2c_data);
	s3c_nand_set_platdata(&rx1950_nand_info);

	/* Turn off suspend on both USB ports, and switch the
	 * selectable USB port to USB device mode. */
	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
						S3C2410_MISCCR_USBSUSPND0 |
						S3C2410_MISCCR_USBSUSPND1, 0x0);

	WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
	gpio_direction_output(S3C2410_GPJ(5), 0);

	/* mmc power is disabled by default */
	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
	gpio_direction_output(S3C2410_GPJ(1), 0);

	for (i = 0; i < 8; i++)
		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 10; i < 16; i++)
		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 2; i < 8; i++)
		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	for (i = 11; i < 16; i++)
		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));

	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
}

/* H1940 and RX3715 need to reserve this for suspend */
static void __init rx1950_reserve(void)
{
	memblock_reserve(0x30003000, 0x1000);
	memblock_reserve(0x30081000, 0x1000);
}

MACHINE_START(RX1950, "HP iPAQ RX1950")
    /* Maintainers: Vasily Khoruzhick */
    .phys_io = S3C2410_PA_UART,
	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
	.boot_params = S3C2410_SDRAM_PA + 0x100,
	.map_io = rx1950_map_io,
	.reserve	= rx1950_reserve,
	.init_irq = s3c24xx_init_irq,
	.init_machine = rx1950_init_machine,
	.timer = &s3c24xx_timer,
MACHINE_END