Bryan Huntsman | 3f2bc4d | 2011-08-16 17:27:22 -0700 | [diff] [blame^] | 1 | /* drivers/i2c/chips/smb329.c |
| 2 | * |
| 3 | * SMB329B Switch Charger (SUMMIT Microelectronics) |
| 4 | * |
| 5 | * Copyright (C) 2009 HTC Corporation |
| 6 | * Author: Justin Lin <Justin_Lin@htc.com> |
| 7 | * |
| 8 | * This software is licensed under the terms of the GNU General Public |
| 9 | * License version 2, as published by the Free Software Foundation, and |
| 10 | * may be copied, distributed, and modified under those terms. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | */ |
| 18 | |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/i2c.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/workqueue.h> |
| 25 | #include <linux/mutex.h> |
| 26 | #include <asm/atomic.h> |
| 27 | |
| 28 | #include "board-mahimahi-smb329.h" |
| 29 | |
| 30 | static struct smb329_data { |
| 31 | struct i2c_client *client; |
| 32 | uint8_t version; |
| 33 | struct work_struct work; |
| 34 | struct mutex state_lock; |
| 35 | int chg_state; |
| 36 | } smb329; |
| 37 | |
| 38 | static int smb329_i2c_write(uint8_t *value, uint8_t reg, uint8_t num_bytes) |
| 39 | { |
| 40 | int ret; |
| 41 | struct i2c_msg msg; |
| 42 | |
| 43 | /* write the first byte of buffer as the register address */ |
| 44 | value[0] = reg; |
| 45 | msg.addr = smb329.client->addr; |
| 46 | msg.len = num_bytes + 1; |
| 47 | msg.flags = 0; |
| 48 | msg.buf = value; |
| 49 | |
| 50 | ret = i2c_transfer(smb329.client->adapter, &msg, 1); |
| 51 | |
| 52 | return (ret >= 0) ? 0 : ret; |
| 53 | } |
| 54 | |
| 55 | static int smb329_i2c_read(uint8_t *value, uint8_t reg, uint8_t num_bytes) |
| 56 | { |
| 57 | int ret; |
| 58 | struct i2c_msg msg[2]; |
| 59 | |
| 60 | /* setup the address to read */ |
| 61 | msg[0].addr = smb329.client->addr; |
| 62 | msg[0].len = 1; |
| 63 | msg[0].flags = 0; |
| 64 | msg[0].buf = ® |
| 65 | |
| 66 | /* setup the read buffer */ |
| 67 | msg[1].addr = smb329.client->addr; |
| 68 | msg[1].flags = I2C_M_RD; |
| 69 | msg[1].len = num_bytes; |
| 70 | msg[1].buf = value; |
| 71 | |
| 72 | ret = i2c_transfer(smb329.client->adapter, msg, 2); |
| 73 | |
| 74 | return (ret >= 0) ? 0 : ret; |
| 75 | } |
| 76 | |
| 77 | static int smb329_i2c_write_byte(uint8_t value, uint8_t reg) |
| 78 | { |
| 79 | int ret; |
| 80 | uint8_t buf[2] = { 0 }; |
| 81 | |
| 82 | buf[1] = value; |
| 83 | ret = smb329_i2c_write(buf, reg, 1); |
| 84 | if (ret) |
| 85 | pr_err("smb329: write byte error (%d)\n", ret); |
| 86 | |
| 87 | return ret; |
| 88 | } |
| 89 | |
| 90 | static int smb329_i2c_read_byte(uint8_t *value, uint8_t reg) |
| 91 | { |
| 92 | int ret = smb329_i2c_read(value, reg, 1); |
| 93 | if (ret) |
| 94 | pr_err("smb329: read byte error (%d)\n", ret); |
| 95 | |
| 96 | return ret; |
| 97 | } |
| 98 | |
| 99 | int smb329_set_charger_ctrl(uint32_t ctl) |
| 100 | { |
| 101 | mutex_lock(&smb329.state_lock); |
| 102 | smb329.chg_state = ctl; |
| 103 | schedule_work(&smb329.work); |
| 104 | mutex_unlock(&smb329.state_lock); |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static void smb329_work_func(struct work_struct *work) |
| 109 | { |
| 110 | mutex_lock(&smb329.state_lock); |
| 111 | |
| 112 | switch (smb329.chg_state) { |
| 113 | case SMB329_ENABLE_FAST_CHG: |
| 114 | pr_info("smb329: charger on (fast)\n"); |
| 115 | smb329_i2c_write_byte(0x84, 0x31); |
| 116 | smb329_i2c_write_byte(0x08, 0x05); |
| 117 | if ((smb329.version & 0x18) == 0x0) |
| 118 | smb329_i2c_write_byte(0xA9, 0x00); |
| 119 | break; |
| 120 | |
| 121 | case SMB329_DISABLE_CHG: |
| 122 | case SMB329_ENABLE_SLOW_CHG: |
| 123 | pr_info("smb329: charger off/slow\n"); |
| 124 | smb329_i2c_write_byte(0x88, 0x31); |
| 125 | smb329_i2c_write_byte(0x08, 0x05); |
| 126 | break; |
| 127 | default: |
| 128 | pr_err("smb329: unknown charger state %d\n", |
| 129 | smb329.chg_state); |
| 130 | } |
| 131 | |
| 132 | mutex_unlock(&smb329.state_lock); |
| 133 | } |
| 134 | |
| 135 | static int smb329_probe(struct i2c_client *client, |
| 136 | const struct i2c_device_id *id) |
| 137 | { |
| 138 | if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { |
| 139 | dev_dbg(&client->dev, "[SMB329]:I2C fail\n"); |
| 140 | return -EIO; |
| 141 | } |
| 142 | |
| 143 | smb329.client = client; |
| 144 | mutex_init(&smb329.state_lock); |
| 145 | INIT_WORK(&smb329.work, smb329_work_func); |
| 146 | |
| 147 | smb329_i2c_read_byte(&smb329.version, 0x3B); |
| 148 | pr_info("smb329 version: 0x%02x\n", smb329.version); |
| 149 | |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | static const struct i2c_device_id smb329_id[] = { |
| 154 | { "smb329", 0 }, |
| 155 | { }, |
| 156 | }; |
| 157 | |
| 158 | static struct i2c_driver smb329_driver = { |
| 159 | .driver.name = "smb329", |
| 160 | .id_table = smb329_id, |
| 161 | .probe = smb329_probe, |
| 162 | }; |
| 163 | |
| 164 | static int __init smb329_init(void) |
| 165 | { |
| 166 | int ret = i2c_add_driver(&smb329_driver); |
| 167 | if (ret) |
| 168 | pr_err("smb329_init: failed\n"); |
| 169 | |
| 170 | return ret; |
| 171 | } |
| 172 | |
| 173 | module_init(smb329_init); |
| 174 | |
| 175 | MODULE_AUTHOR("Justin Lin <Justin_Lin@htc.com>"); |
| 176 | MODULE_DESCRIPTION("SUMMIT Microelectronics SMB329B switch charger"); |
| 177 | MODULE_LICENSE("GPL"); |