blob: d1143a68d82a9b44987c4455dfb86a39f2dcdc9c [file] [log] [blame]
Becky Bruceec3cf2e2009-05-14 12:42:28 +00001/*
2 * Contains routines needed to support swiotlb for ppc.
3 *
4 * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 */
12
13#include <linux/dma-mapping.h>
14#include <linux/pfn.h>
15#include <linux/of_platform.h>
16#include <linux/platform_device.h>
17#include <linux/pci.h>
18
19#include <asm/machdep.h>
20#include <asm/swiotlb.h>
21#include <asm/dma.h>
22#include <asm/abs_addr.h>
23
24int swiotlb __read_mostly;
25unsigned int ppc_swiotlb_enable;
26
Becky Bruceec3cf2e2009-05-14 12:42:28 +000027/*
Becky Bruceec3cf2e2009-05-14 12:42:28 +000028 * At the moment, all platforms that use this code only require
29 * swiotlb to be used if we're operating on HIGHMEM. Since
30 * we don't ever call anything other than map_sg, unmap_sg,
31 * map_page, and unmap_page on highmem, use normal dma_ops
32 * for everything else.
33 */
FUJITA Tomonori45223c52009-08-04 19:08:25 +000034struct dma_map_ops swiotlb_dma_ops = {
Becky Bruceec3cf2e2009-05-14 12:42:28 +000035 .alloc_coherent = dma_direct_alloc_coherent,
36 .free_coherent = dma_direct_free_coherent,
37 .map_sg = swiotlb_map_sg_attrs,
38 .unmap_sg = swiotlb_unmap_sg_attrs,
39 .dma_supported = swiotlb_dma_supported,
40 .map_page = swiotlb_map_page,
41 .unmap_page = swiotlb_unmap_page,
Becky Bruceec3cf2e2009-05-14 12:42:28 +000042 .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
43 .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
44 .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
45 .sync_sg_for_device = swiotlb_sync_sg_for_device
46};
47
FUJITA Tomonori762afb72009-08-04 19:08:22 +000048void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
49{
50 struct pci_controller *hose;
51 struct dev_archdata *sd;
52
53 hose = pci_bus_to_host(pdev->bus);
54 sd = &pdev->dev.archdata;
55 sd->max_direct_dma_addr =
56 hose->dma_window_base_cur + hose->dma_window_size;
57}
58
Becky Bruceec3cf2e2009-05-14 12:42:28 +000059static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
60 unsigned long action, void *data)
61{
62 struct device *dev = data;
FUJITA Tomonori762afb72009-08-04 19:08:22 +000063 struct dev_archdata *sd;
Becky Bruceec3cf2e2009-05-14 12:42:28 +000064
65 /* We are only intereted in device addition */
66 if (action != BUS_NOTIFY_ADD_DEVICE)
67 return 0;
68
FUJITA Tomonori762afb72009-08-04 19:08:22 +000069 sd = &dev->archdata;
70 sd->max_direct_dma_addr = 0;
71
Becky Bruceec3cf2e2009-05-14 12:42:28 +000072 /* May need to bounce if the device can't address all of DRAM */
73 if (dma_get_mask(dev) < lmb_end_of_DRAM())
74 set_dma_ops(dev, &swiotlb_dma_ops);
75
76 return NOTIFY_DONE;
77}
78
79static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
80 .notifier_call = ppc_swiotlb_bus_notify,
81 .priority = 0,
82};
83
84static struct notifier_block ppc_swiotlb_of_bus_notifier = {
85 .notifier_call = ppc_swiotlb_bus_notify,
86 .priority = 0,
87};
88
89int __init swiotlb_setup_bus_notifier(void)
90{
91 bus_register_notifier(&platform_bus_type,
92 &ppc_swiotlb_plat_bus_notifier);
93 bus_register_notifier(&of_platform_bus_type,
94 &ppc_swiotlb_of_bus_notifier);
95
96 return 0;
97}