| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 1 | /* | 
|  | 2 | * Freescale QUICC Engine USB Host Controller Driver | 
|  | 3 | * | 
|  | 4 | * Copyright (c) Freescale Semicondutor, Inc. 2006. | 
|  | 5 | *               Shlomi Gridish <gridish@freescale.com> | 
|  | 6 | *               Jerry Huang <Chang-Ming.Huang@freescale.com> | 
|  | 7 | * Copyright (c) Logic Product Development, Inc. 2007 | 
|  | 8 | *               Peter Barada <peterb@logicpd.com> | 
|  | 9 | * Copyright (c) MontaVista Software, Inc. 2008. | 
|  | 10 | *               Anton Vorontsov <avorontsov@ru.mvista.com> | 
|  | 11 | * | 
|  | 12 | * This program is free software; you can redistribute  it and/or modify it | 
|  | 13 | * under  the terms of  the GNU General  Public License as published by the | 
|  | 14 | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | 15 | * option) any later version. | 
|  | 16 | */ | 
|  | 17 |  | 
|  | 18 | #include <linux/kernel.h> | 
|  | 19 | #include <linux/types.h> | 
|  | 20 | #include <linux/spinlock.h> | 
|  | 21 | #include <linux/delay.h> | 
|  | 22 | #include <linux/errno.h> | 
|  | 23 | #include <linux/io.h> | 
|  | 24 | #include <linux/usb.h> | 
| Eric Lescouet | 27729aa | 2010-04-24 23:21:52 +0200 | [diff] [blame] | 25 | #include <linux/usb/hcd.h> | 
| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 26 | #include <linux/gpio.h> | 
|  | 27 | #include <asm/qe.h> | 
| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 28 | #include "fhci.h" | 
|  | 29 |  | 
|  | 30 | /* virtual root hub specific descriptor */ | 
|  | 31 | static u8 root_hub_des[] = { | 
|  | 32 | 0x09, /* blength */ | 
|  | 33 | 0x29, /* bDescriptorType;hub-descriptor */ | 
|  | 34 | 0x01, /* bNbrPorts */ | 
|  | 35 | 0x00, /* wHubCharacteristics */ | 
|  | 36 | 0x00, | 
|  | 37 | 0x01, /* bPwrOn2pwrGood;2ms */ | 
|  | 38 | 0x00, /* bHubContrCurrent;0mA */ | 
|  | 39 | 0x00, /* DeviceRemoveable */ | 
|  | 40 | 0xff, /* PortPwrCtrlMask */ | 
|  | 41 | }; | 
|  | 42 |  | 
|  | 43 | static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) | 
|  | 44 | { | 
|  | 45 | int gpio = fhci->gpios[gpio_nr]; | 
|  | 46 | bool alow = fhci->alow_gpios[gpio_nr]; | 
|  | 47 |  | 
|  | 48 | if (!gpio_is_valid(gpio)) | 
|  | 49 | return; | 
|  | 50 |  | 
|  | 51 | gpio_set_value(gpio, on ^ alow); | 
|  | 52 | mdelay(5); | 
|  | 53 | } | 
|  | 54 |  | 
|  | 55 | void fhci_config_transceiver(struct fhci_hcd *fhci, | 
|  | 56 | enum fhci_port_status status) | 
|  | 57 | { | 
|  | 58 | fhci_dbg(fhci, "-> %s: %d\n", __func__, status); | 
|  | 59 |  | 
|  | 60 | switch (status) { | 
|  | 61 | case FHCI_PORT_POWER_OFF: | 
|  | 62 | fhci_gpio_set_value(fhci, GPIO_POWER, false); | 
|  | 63 | break; | 
|  | 64 | case FHCI_PORT_DISABLED: | 
|  | 65 | case FHCI_PORT_WAITING: | 
|  | 66 | fhci_gpio_set_value(fhci, GPIO_POWER, true); | 
|  | 67 | break; | 
|  | 68 | case FHCI_PORT_LOW: | 
|  | 69 | fhci_gpio_set_value(fhci, GPIO_SPEED, false); | 
|  | 70 | break; | 
|  | 71 | case FHCI_PORT_FULL: | 
|  | 72 | fhci_gpio_set_value(fhci, GPIO_SPEED, true); | 
|  | 73 | break; | 
|  | 74 | default: | 
|  | 75 | WARN_ON(1); | 
|  | 76 | break; | 
|  | 77 | } | 
|  | 78 |  | 
|  | 79 | fhci_dbg(fhci, "<- %s: %d\n", __func__, status); | 
|  | 80 | } | 
|  | 81 |  | 
|  | 82 | /* disable the USB port by clearing the EN bit in the USBMOD register */ | 
|  | 83 | void fhci_port_disable(struct fhci_hcd *fhci) | 
|  | 84 | { | 
|  | 85 | struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; | 
|  | 86 | enum fhci_port_status port_status; | 
|  | 87 |  | 
|  | 88 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 89 |  | 
|  | 90 | fhci_stop_sof_timer(fhci); | 
|  | 91 |  | 
|  | 92 | fhci_flush_all_transmissions(usb); | 
|  | 93 |  | 
|  | 94 | fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
|  | 95 | port_status = usb->port_status; | 
|  | 96 | usb->port_status = FHCI_PORT_DISABLED; | 
|  | 97 |  | 
|  | 98 | /* Enable IDLE since we want to know if something comes along */ | 
|  | 99 | usb->saved_msk |= USB_E_IDLE_MASK; | 
|  | 100 | out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); | 
|  | 101 |  | 
|  | 102 | /* check if during the disconnection process attached new device */ | 
|  | 103 | if (port_status == FHCI_PORT_WAITING) | 
|  | 104 | fhci_device_connected_interrupt(fhci); | 
|  | 105 | usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; | 
|  | 106 | usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
|  | 107 | fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
|  | 108 |  | 
|  | 109 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 110 | } | 
|  | 111 |  | 
|  | 112 | /* enable the USB port by setting the EN bit in the USBMOD register */ | 
|  | 113 | void fhci_port_enable(void *lld) | 
|  | 114 | { | 
|  | 115 | struct fhci_usb *usb = (struct fhci_usb *)lld; | 
|  | 116 | struct fhci_hcd *fhci = usb->fhci; | 
|  | 117 |  | 
|  | 118 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 119 |  | 
|  | 120 | fhci_config_transceiver(fhci, usb->port_status); | 
|  | 121 |  | 
|  | 122 | if ((usb->port_status != FHCI_PORT_FULL) && | 
|  | 123 | (usb->port_status != FHCI_PORT_LOW)) | 
|  | 124 | fhci_start_sof_timer(fhci); | 
|  | 125 |  | 
|  | 126 | usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; | 
|  | 127 | usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
|  | 128 |  | 
|  | 129 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 130 | } | 
|  | 131 |  | 
|  | 132 | void fhci_io_port_generate_reset(struct fhci_hcd *fhci) | 
|  | 133 | { | 
|  | 134 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 135 |  | 
|  | 136 | gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); | 
|  | 137 | gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); | 
|  | 138 | gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); | 
|  | 139 |  | 
|  | 140 | mdelay(5); | 
|  | 141 |  | 
|  | 142 | qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); | 
|  | 143 | qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); | 
|  | 144 | qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); | 
|  | 145 |  | 
|  | 146 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 147 | } | 
|  | 148 |  | 
|  | 149 | /* generate the RESET condition on the bus */ | 
|  | 150 | void fhci_port_reset(void *lld) | 
|  | 151 | { | 
|  | 152 | struct fhci_usb *usb = (struct fhci_usb *)lld; | 
|  | 153 | struct fhci_hcd *fhci = usb->fhci; | 
|  | 154 | u8 mode; | 
|  | 155 | u16 mask; | 
|  | 156 |  | 
|  | 157 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 158 |  | 
|  | 159 | fhci_stop_sof_timer(fhci); | 
|  | 160 | /* disable the USB controller */ | 
|  | 161 | mode = in_8(&fhci->regs->usb_mod); | 
|  | 162 | out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); | 
|  | 163 |  | 
|  | 164 | /* disable idle interrupts */ | 
|  | 165 | mask = in_be16(&fhci->regs->usb_mask); | 
|  | 166 | out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); | 
|  | 167 |  | 
|  | 168 | fhci_io_port_generate_reset(fhci); | 
|  | 169 |  | 
|  | 170 | /* enable interrupt on this endpoint */ | 
|  | 171 | out_be16(&fhci->regs->usb_mask, mask); | 
|  | 172 |  | 
|  | 173 | /* enable the USB controller */ | 
|  | 174 | mode = in_8(&fhci->regs->usb_mod); | 
|  | 175 | out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); | 
|  | 176 | fhci_start_sof_timer(fhci); | 
|  | 177 |  | 
|  | 178 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 179 | } | 
|  | 180 |  | 
|  | 181 | int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) | 
|  | 182 | { | 
|  | 183 | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | 184 | int ret = 0; | 
|  | 185 | unsigned long flags; | 
|  | 186 |  | 
|  | 187 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 188 |  | 
|  | 189 | spin_lock_irqsave(&fhci->lock, flags); | 
|  | 190 |  | 
|  | 191 | if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | | 
|  | 192 | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | | 
|  | 193 | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { | 
|  | 194 | *buf = 1 << 1; | 
|  | 195 | ret = 1; | 
|  | 196 | fhci_dbg(fhci, "-- %s\n", __func__); | 
|  | 197 | } | 
|  | 198 |  | 
|  | 199 | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  | 200 |  | 
|  | 201 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 202 |  | 
|  | 203 | return ret; | 
|  | 204 | } | 
|  | 205 |  | 
|  | 206 | int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
|  | 207 | u16 wIndex, char *buf, u16 wLength) | 
|  | 208 | { | 
|  | 209 | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | 210 | int retval = 0; | 
|  | 211 | int len = 0; | 
|  | 212 | struct usb_hub_status *hub_status; | 
|  | 213 | struct usb_port_status *port_status; | 
|  | 214 | unsigned long flags; | 
|  | 215 |  | 
|  | 216 | spin_lock_irqsave(&fhci->lock, flags); | 
|  | 217 |  | 
|  | 218 | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  | 219 |  | 
|  | 220 | switch (typeReq) { | 
|  | 221 | case ClearHubFeature: | 
|  | 222 | switch (wValue) { | 
|  | 223 | case C_HUB_LOCAL_POWER: | 
|  | 224 | case C_HUB_OVER_CURRENT: | 
|  | 225 | break; | 
|  | 226 | default: | 
|  | 227 | goto error; | 
|  | 228 | } | 
|  | 229 | break; | 
|  | 230 | case ClearPortFeature: | 
|  | 231 | fhci->vroot_hub->feature &= (1 << wValue); | 
|  | 232 |  | 
|  | 233 | switch (wValue) { | 
|  | 234 | case USB_PORT_FEAT_ENABLE: | 
|  | 235 | fhci->vroot_hub->port.wPortStatus &= | 
|  | 236 | ~USB_PORT_STAT_ENABLE; | 
|  | 237 | fhci_port_disable(fhci); | 
|  | 238 | break; | 
|  | 239 | case USB_PORT_FEAT_C_ENABLE: | 
|  | 240 | fhci->vroot_hub->port.wPortChange &= | 
|  | 241 | ~USB_PORT_STAT_C_ENABLE; | 
|  | 242 | break; | 
|  | 243 | case USB_PORT_FEAT_SUSPEND: | 
|  | 244 | fhci->vroot_hub->port.wPortStatus &= | 
|  | 245 | ~USB_PORT_STAT_SUSPEND; | 
|  | 246 | fhci_stop_sof_timer(fhci); | 
|  | 247 | break; | 
|  | 248 | case USB_PORT_FEAT_C_SUSPEND: | 
|  | 249 | fhci->vroot_hub->port.wPortChange &= | 
|  | 250 | ~USB_PORT_STAT_C_SUSPEND; | 
|  | 251 | break; | 
|  | 252 | case USB_PORT_FEAT_POWER: | 
|  | 253 | fhci->vroot_hub->port.wPortStatus &= | 
|  | 254 | ~USB_PORT_STAT_POWER; | 
|  | 255 | fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | 
|  | 256 | break; | 
|  | 257 | case USB_PORT_FEAT_C_CONNECTION: | 
|  | 258 | fhci->vroot_hub->port.wPortChange &= | 
|  | 259 | ~USB_PORT_STAT_C_CONNECTION; | 
|  | 260 | break; | 
|  | 261 | case USB_PORT_FEAT_C_OVER_CURRENT: | 
|  | 262 | fhci->vroot_hub->port.wPortChange &= | 
|  | 263 | ~USB_PORT_STAT_C_OVERCURRENT; | 
|  | 264 | break; | 
|  | 265 | case USB_PORT_FEAT_C_RESET: | 
|  | 266 | fhci->vroot_hub->port.wPortChange &= | 
|  | 267 | ~USB_PORT_STAT_C_RESET; | 
|  | 268 | break; | 
|  | 269 | default: | 
|  | 270 | goto error; | 
|  | 271 | } | 
|  | 272 | break; | 
|  | 273 | case GetHubDescriptor: | 
|  | 274 | memcpy(buf, root_hub_des, sizeof(root_hub_des)); | 
|  | 275 | buf[3] = 0x11; /* per-port power, no ovrcrnt */ | 
|  | 276 | len = (buf[0] < wLength) ? buf[0] : wLength; | 
|  | 277 | break; | 
|  | 278 | case GetHubStatus: | 
|  | 279 | hub_status = (struct usb_hub_status *)buf; | 
|  | 280 | hub_status->wHubStatus = | 
|  | 281 | cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); | 
|  | 282 | hub_status->wHubChange = | 
|  | 283 | cpu_to_le16(fhci->vroot_hub->hub.wHubChange); | 
|  | 284 | len = 4; | 
|  | 285 | break; | 
|  | 286 | case GetPortStatus: | 
|  | 287 | port_status = (struct usb_port_status *)buf; | 
|  | 288 | port_status->wPortStatus = | 
|  | 289 | cpu_to_le16(fhci->vroot_hub->port.wPortStatus); | 
|  | 290 | port_status->wPortChange = | 
|  | 291 | cpu_to_le16(fhci->vroot_hub->port.wPortChange); | 
|  | 292 | len = 4; | 
|  | 293 | break; | 
|  | 294 | case SetHubFeature: | 
|  | 295 | switch (wValue) { | 
|  | 296 | case C_HUB_OVER_CURRENT: | 
|  | 297 | case C_HUB_LOCAL_POWER: | 
|  | 298 | break; | 
|  | 299 | default: | 
|  | 300 | goto error; | 
|  | 301 | } | 
|  | 302 | break; | 
|  | 303 | case SetPortFeature: | 
|  | 304 | fhci->vroot_hub->feature |= (1 << wValue); | 
|  | 305 |  | 
|  | 306 | switch (wValue) { | 
|  | 307 | case USB_PORT_FEAT_ENABLE: | 
|  | 308 | fhci->vroot_hub->port.wPortStatus |= | 
|  | 309 | USB_PORT_STAT_ENABLE; | 
|  | 310 | fhci_port_enable(fhci->usb_lld); | 
|  | 311 | break; | 
|  | 312 | case USB_PORT_FEAT_SUSPEND: | 
|  | 313 | fhci->vroot_hub->port.wPortStatus |= | 
|  | 314 | USB_PORT_STAT_SUSPEND; | 
|  | 315 | fhci_stop_sof_timer(fhci); | 
|  | 316 | break; | 
|  | 317 | case USB_PORT_FEAT_RESET: | 
|  | 318 | fhci->vroot_hub->port.wPortStatus |= | 
|  | 319 | USB_PORT_STAT_RESET; | 
|  | 320 | fhci_port_reset(fhci->usb_lld); | 
|  | 321 | fhci->vroot_hub->port.wPortStatus |= | 
|  | 322 | USB_PORT_STAT_ENABLE; | 
|  | 323 | fhci->vroot_hub->port.wPortStatus &= | 
|  | 324 | ~USB_PORT_STAT_RESET; | 
|  | 325 | break; | 
|  | 326 | case USB_PORT_FEAT_POWER: | 
|  | 327 | fhci->vroot_hub->port.wPortStatus |= | 
|  | 328 | USB_PORT_STAT_POWER; | 
|  | 329 | fhci_config_transceiver(fhci, FHCI_PORT_WAITING); | 
|  | 330 | break; | 
|  | 331 | default: | 
|  | 332 | goto error; | 
|  | 333 | } | 
|  | 334 | break; | 
|  | 335 | default: | 
|  | 336 | error: | 
|  | 337 | retval = -EPIPE; | 
|  | 338 | } | 
|  | 339 |  | 
|  | 340 | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | 341 |  | 
|  | 342 | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  | 343 |  | 
|  | 344 | return retval; | 
|  | 345 | } |