| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com> | 
|  | 3 | * | 
|  | 4 | * The LM95245 is a sensor chip made by National Semiconductors. | 
|  | 5 | * It reports up to two temperatures (its own plus an external one). | 
|  | 6 | * Complete datasheet can be obtained from National's website at: | 
|  | 7 | *   http://www.national.com/ds.cgi/LM/LM95245.pdf | 
|  | 8 | * | 
|  | 9 | * This driver is based on lm95241.c | 
|  | 10 | * | 
|  | 11 | * This program is free software; you can redistribute it and/or modify | 
|  | 12 | * it under the terms of the GNU General Public License as published by | 
|  | 13 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 14 | * (at your option) any later version. | 
|  | 15 | * | 
|  | 16 | * This program is distributed in the hope that it will be useful, | 
|  | 17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 19 | * GNU General Public License for more details. | 
|  | 20 | * | 
|  | 21 | * You should have received a copy of the GNU General Public License | 
|  | 22 | * along with this program; if not, write to the Free Software | 
|  | 23 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | 24 | */ | 
|  | 25 |  | 
|  | 26 | #include <linux/module.h> | 
|  | 27 | #include <linux/init.h> | 
|  | 28 | #include <linux/slab.h> | 
|  | 29 | #include <linux/jiffies.h> | 
|  | 30 | #include <linux/i2c.h> | 
|  | 31 | #include <linux/hwmon.h> | 
|  | 32 | #include <linux/hwmon-sysfs.h> | 
|  | 33 | #include <linux/err.h> | 
|  | 34 | #include <linux/mutex.h> | 
|  | 35 | #include <linux/sysfs.h> | 
|  | 36 |  | 
|  | 37 | #define DEVNAME "lm95245" | 
|  | 38 |  | 
|  | 39 | static const unsigned short normal_i2c[] = { | 
|  | 40 | 0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END }; | 
|  | 41 |  | 
|  | 42 | /* LM95245 registers */ | 
|  | 43 | /* general registers */ | 
|  | 44 | #define LM95245_REG_RW_CONFIG1		0x03 | 
|  | 45 | #define LM95245_REG_RW_CONVERS_RATE	0x04 | 
|  | 46 | #define LM95245_REG_W_ONE_SHOT		0x0F | 
|  | 47 |  | 
|  | 48 | /* diode configuration */ | 
|  | 49 | #define LM95245_REG_RW_CONFIG2		0xBF | 
|  | 50 | #define LM95245_REG_RW_REMOTE_OFFH	0x11 | 
|  | 51 | #define LM95245_REG_RW_REMOTE_OFFL	0x12 | 
|  | 52 |  | 
|  | 53 | /* status registers */ | 
|  | 54 | #define LM95245_REG_R_STATUS1		0x02 | 
|  | 55 | #define LM95245_REG_R_STATUS2		0x33 | 
|  | 56 |  | 
|  | 57 | /* limit registers */ | 
|  | 58 | #define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07 | 
|  | 59 | #define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20 | 
|  | 60 | #define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19 | 
|  | 61 | #define LM95245_REG_RW_COMMON_HYSTERESIS	0x21 | 
|  | 62 |  | 
|  | 63 | /* temperature signed */ | 
|  | 64 | #define LM95245_REG_R_LOCAL_TEMPH_S	0x00 | 
|  | 65 | #define LM95245_REG_R_LOCAL_TEMPL_S	0x30 | 
|  | 66 | #define LM95245_REG_R_REMOTE_TEMPH_S	0x01 | 
|  | 67 | #define LM95245_REG_R_REMOTE_TEMPL_S	0x10 | 
|  | 68 | /* temperature unsigned */ | 
|  | 69 | #define LM95245_REG_R_REMOTE_TEMPH_U	0x31 | 
|  | 70 | #define LM95245_REG_R_REMOTE_TEMPL_U	0x32 | 
|  | 71 |  | 
|  | 72 | /* id registers */ | 
|  | 73 | #define LM95245_REG_R_MAN_ID		0xFE | 
|  | 74 | #define LM95245_REG_R_CHIP_ID		0xFF | 
|  | 75 |  | 
|  | 76 | /* LM95245 specific bitfields */ | 
|  | 77 | #define CFG_STOP		0x40 | 
|  | 78 | #define CFG_REMOTE_TCRIT_MASK	0x10 | 
|  | 79 | #define CFG_REMOTE_OS_MASK	0x08 | 
|  | 80 | #define CFG_LOCAL_TCRIT_MASK	0x04 | 
|  | 81 | #define CFG_LOCAL_OS_MASK	0x02 | 
|  | 82 |  | 
|  | 83 | #define CFG2_OS_A0		0x40 | 
|  | 84 | #define CFG2_DIODE_FAULT_OS	0x20 | 
|  | 85 | #define CFG2_DIODE_FAULT_TCRIT	0x10 | 
|  | 86 | #define CFG2_REMOTE_TT		0x08 | 
|  | 87 | #define CFG2_REMOTE_FILTER_DIS	0x00 | 
|  | 88 | #define CFG2_REMOTE_FILTER_EN	0x06 | 
|  | 89 |  | 
|  | 90 | /* conversation rate in ms */ | 
|  | 91 | #define RATE_CR0063	0x00 | 
|  | 92 | #define RATE_CR0364	0x01 | 
|  | 93 | #define RATE_CR1000	0x02 | 
|  | 94 | #define RATE_CR2500	0x03 | 
|  | 95 |  | 
|  | 96 | #define STATUS1_DIODE_FAULT	0x04 | 
|  | 97 | #define STATUS1_RTCRIT		0x02 | 
|  | 98 | #define STATUS1_LOC		0x01 | 
|  | 99 |  | 
|  | 100 | #define MANUFACTURER_ID		0x01 | 
|  | 101 | #define DEFAULT_REVISION	0xB3 | 
|  | 102 |  | 
|  | 103 | static const u8 lm95245_reg_address[] = { | 
|  | 104 | LM95245_REG_R_LOCAL_TEMPH_S, | 
|  | 105 | LM95245_REG_R_LOCAL_TEMPL_S, | 
|  | 106 | LM95245_REG_R_REMOTE_TEMPH_S, | 
|  | 107 | LM95245_REG_R_REMOTE_TEMPL_S, | 
|  | 108 | LM95245_REG_R_REMOTE_TEMPH_U, | 
|  | 109 | LM95245_REG_R_REMOTE_TEMPL_U, | 
|  | 110 | LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, | 
|  | 111 | LM95245_REG_RW_REMOTE_TCRIT_LIMIT, | 
|  | 112 | LM95245_REG_RW_COMMON_HYSTERESIS, | 
|  | 113 | LM95245_REG_R_STATUS1, | 
|  | 114 | }; | 
|  | 115 |  | 
|  | 116 | /* Client data (each client gets its own) */ | 
|  | 117 | struct lm95245_data { | 
|  | 118 | struct device *hwmon_dev; | 
|  | 119 | struct mutex update_lock; | 
|  | 120 | unsigned long last_updated;	/* in jiffies */ | 
|  | 121 | unsigned long interval;	/* in msecs */ | 
|  | 122 | bool valid;		/* zero until following fields are valid */ | 
|  | 123 | /* registers values */ | 
|  | 124 | u8 regs[ARRAY_SIZE(lm95245_reg_address)]; | 
|  | 125 | u8 config1, config2; | 
|  | 126 | }; | 
|  | 127 |  | 
|  | 128 | /* Conversions */ | 
|  | 129 | static int temp_from_reg_unsigned(u8 val_h, u8 val_l) | 
|  | 130 | { | 
|  | 131 | return val_h * 1000 + val_l * 1000 / 256; | 
|  | 132 | } | 
|  | 133 |  | 
|  | 134 | static int temp_from_reg_signed(u8 val_h, u8 val_l) | 
|  | 135 | { | 
|  | 136 | if (val_h & 0x80) | 
|  | 137 | return (val_h - 0x100) * 1000; | 
|  | 138 | return temp_from_reg_unsigned(val_h, val_l); | 
|  | 139 | } | 
|  | 140 |  | 
|  | 141 | static struct lm95245_data *lm95245_update_device(struct device *dev) | 
|  | 142 | { | 
|  | 143 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 144 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 145 |  | 
|  | 146 | mutex_lock(&data->update_lock); | 
|  | 147 |  | 
|  | 148 | if (time_after(jiffies, data->last_updated | 
|  | 149 | + msecs_to_jiffies(data->interval)) || !data->valid) { | 
|  | 150 | int i; | 
|  | 151 |  | 
|  | 152 | dev_dbg(&client->dev, "Updating lm95245 data.\n"); | 
|  | 153 | for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) | 
|  | 154 | data->regs[i] | 
|  | 155 | = i2c_smbus_read_byte_data(client, | 
|  | 156 | lm95245_reg_address[i]); | 
|  | 157 | data->last_updated = jiffies; | 
|  | 158 | data->valid = 1; | 
|  | 159 | } | 
|  | 160 |  | 
|  | 161 | mutex_unlock(&data->update_lock); | 
|  | 162 |  | 
|  | 163 | return data; | 
|  | 164 | } | 
|  | 165 |  | 
|  | 166 | static unsigned long lm95245_read_conversion_rate(struct i2c_client *client) | 
|  | 167 | { | 
|  | 168 | int rate; | 
|  | 169 | unsigned long interval; | 
|  | 170 |  | 
|  | 171 | rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE); | 
|  | 172 |  | 
|  | 173 | switch (rate) { | 
|  | 174 | case RATE_CR0063: | 
|  | 175 | interval = 63; | 
|  | 176 | break; | 
|  | 177 | case RATE_CR0364: | 
|  | 178 | interval = 364; | 
|  | 179 | break; | 
|  | 180 | case RATE_CR1000: | 
|  | 181 | interval = 1000; | 
|  | 182 | break; | 
|  | 183 | case RATE_CR2500: | 
|  | 184 | default: | 
|  | 185 | interval = 2500; | 
|  | 186 | break; | 
|  | 187 | } | 
|  | 188 |  | 
|  | 189 | return interval; | 
|  | 190 | } | 
|  | 191 |  | 
|  | 192 | static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, | 
|  | 193 | unsigned long interval) | 
|  | 194 | { | 
|  | 195 | int rate; | 
|  | 196 |  | 
|  | 197 | if (interval <= 63) { | 
|  | 198 | interval = 63; | 
|  | 199 | rate = RATE_CR0063; | 
|  | 200 | } else if (interval <= 364) { | 
|  | 201 | interval = 364; | 
|  | 202 | rate = RATE_CR0364; | 
|  | 203 | } else if (interval <= 1000) { | 
|  | 204 | interval = 1000; | 
|  | 205 | rate = RATE_CR1000; | 
|  | 206 | } else { | 
|  | 207 | interval = 2500; | 
|  | 208 | rate = RATE_CR2500; | 
|  | 209 | } | 
|  | 210 |  | 
|  | 211 | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate); | 
|  | 212 |  | 
|  | 213 | return interval; | 
|  | 214 | } | 
|  | 215 |  | 
|  | 216 | /* Sysfs stuff */ | 
|  | 217 | static ssize_t show_input(struct device *dev, struct device_attribute *attr, | 
|  | 218 | char *buf) | 
|  | 219 | { | 
|  | 220 | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | 221 | int temp; | 
|  | 222 | int index = to_sensor_dev_attr(attr)->index; | 
|  | 223 |  | 
|  | 224 | /* | 
|  | 225 | * Index 0 (Local temp) is always signed | 
|  | 226 | * Index 2 (Remote temp) has both signed and unsigned data | 
|  | 227 | * use signed calculation for remote if signed bit is set | 
|  | 228 | */ | 
|  | 229 | if (index == 0 || data->regs[index] & 0x80) | 
|  | 230 | temp = temp_from_reg_signed(data->regs[index], | 
|  | 231 | data->regs[index + 1]); | 
|  | 232 | else | 
|  | 233 | temp = temp_from_reg_unsigned(data->regs[index + 2], | 
|  | 234 | data->regs[index + 3]); | 
|  | 235 |  | 
|  | 236 | return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp); | 
|  | 237 | } | 
|  | 238 |  | 
|  | 239 | static ssize_t show_limit(struct device *dev, struct device_attribute *attr, | 
|  | 240 | char *buf) | 
|  | 241 | { | 
|  | 242 | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | 243 | int index = to_sensor_dev_attr(attr)->index; | 
|  | 244 |  | 
|  | 245 | return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
|  | 246 | data->regs[index] * 1000); | 
|  | 247 | } | 
|  | 248 |  | 
|  | 249 | static ssize_t set_limit(struct device *dev, struct device_attribute *attr, | 
|  | 250 | const char *buf, size_t count) | 
|  | 251 | { | 
|  | 252 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 253 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 254 | int index = to_sensor_dev_attr(attr)->index; | 
|  | 255 | unsigned long val; | 
|  | 256 |  | 
| Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 257 | if (kstrtoul(buf, 10, &val) < 0) | 
| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 258 | return -EINVAL; | 
|  | 259 |  | 
|  | 260 | val /= 1000; | 
|  | 261 |  | 
|  | 262 | val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255)); | 
|  | 263 |  | 
|  | 264 | mutex_lock(&data->update_lock); | 
|  | 265 |  | 
|  | 266 | data->valid = 0; | 
|  | 267 |  | 
|  | 268 | i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val); | 
|  | 269 |  | 
|  | 270 | mutex_unlock(&data->update_lock); | 
|  | 271 |  | 
|  | 272 | return count; | 
|  | 273 | } | 
|  | 274 |  | 
|  | 275 | static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, | 
|  | 276 | const char *buf, size_t count) | 
|  | 277 | { | 
|  | 278 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 279 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 280 | unsigned long val; | 
|  | 281 |  | 
| Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 282 | if (kstrtoul(buf, 10, &val) < 0) | 
| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 283 | return -EINVAL; | 
|  | 284 |  | 
|  | 285 | val /= 1000; | 
|  | 286 |  | 
|  | 287 | val = SENSORS_LIMIT(val, 0, 31); | 
|  | 288 |  | 
|  | 289 | mutex_lock(&data->update_lock); | 
|  | 290 |  | 
|  | 291 | data->valid = 0; | 
|  | 292 |  | 
|  | 293 | /* shared crit hysteresis */ | 
|  | 294 | i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, | 
|  | 295 | val); | 
|  | 296 |  | 
|  | 297 | mutex_unlock(&data->update_lock); | 
|  | 298 |  | 
|  | 299 | return count; | 
|  | 300 | } | 
|  | 301 |  | 
|  | 302 | static ssize_t show_type(struct device *dev, struct device_attribute *attr, | 
|  | 303 | char *buf) | 
|  | 304 | { | 
|  | 305 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 306 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 307 |  | 
|  | 308 | return snprintf(buf, PAGE_SIZE - 1, | 
|  | 309 | data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); | 
|  | 310 | } | 
|  | 311 |  | 
|  | 312 | static ssize_t set_type(struct device *dev, struct device_attribute *attr, | 
|  | 313 | const char *buf, size_t count) | 
|  | 314 | { | 
|  | 315 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 316 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 317 | unsigned long val; | 
|  | 318 |  | 
| Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 319 | if (kstrtoul(buf, 10, &val) < 0) | 
| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 320 | return -EINVAL; | 
|  | 321 | if (val != 1 && val != 2) | 
|  | 322 | return -EINVAL; | 
|  | 323 |  | 
|  | 324 | mutex_lock(&data->update_lock); | 
|  | 325 |  | 
|  | 326 | if (val == 1) | 
|  | 327 | data->config2 |= CFG2_REMOTE_TT; | 
|  | 328 | else | 
|  | 329 | data->config2 &= ~CFG2_REMOTE_TT; | 
|  | 330 |  | 
|  | 331 | data->valid = 0; | 
|  | 332 |  | 
|  | 333 | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2, | 
|  | 334 | data->config2); | 
|  | 335 |  | 
|  | 336 | mutex_unlock(&data->update_lock); | 
|  | 337 |  | 
|  | 338 | return count; | 
|  | 339 | } | 
|  | 340 |  | 
|  | 341 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, | 
|  | 342 | char *buf) | 
|  | 343 | { | 
|  | 344 | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | 345 | int index = to_sensor_dev_attr(attr)->index; | 
|  | 346 |  | 
|  | 347 | return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
|  | 348 | !!(data->regs[9] & index)); | 
|  | 349 | } | 
|  | 350 |  | 
|  | 351 | static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | 
|  | 352 | char *buf) | 
|  | 353 | { | 
|  | 354 | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | 355 |  | 
|  | 356 | return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval); | 
|  | 357 | } | 
|  | 358 |  | 
|  | 359 | static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | 
|  | 360 | const char *buf, size_t count) | 
|  | 361 | { | 
|  | 362 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 363 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 364 | unsigned long val; | 
|  | 365 |  | 
| Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 366 | if (kstrtoul(buf, 10, &val) < 0) | 
| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 367 | return -EINVAL; | 
|  | 368 |  | 
|  | 369 | mutex_lock(&data->update_lock); | 
|  | 370 |  | 
|  | 371 | data->interval = lm95245_set_conversion_rate(client, val); | 
|  | 372 |  | 
|  | 373 | mutex_unlock(&data->update_lock); | 
|  | 374 |  | 
|  | 375 | return count; | 
|  | 376 | } | 
|  | 377 |  | 
|  | 378 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | 
|  | 379 | static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, | 
|  | 380 | set_limit, 6); | 
|  | 381 | static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
|  | 382 | set_crit_hyst, 8); | 
|  | 383 | static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, | 
|  | 384 | STATUS1_LOC); | 
|  | 385 |  | 
|  | 386 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); | 
|  | 387 | static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, | 
|  | 388 | set_limit, 7); | 
|  | 389 | static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
|  | 390 | set_crit_hyst, 8); | 
|  | 391 | static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, | 
|  | 392 | STATUS1_RTCRIT); | 
|  | 393 | static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, | 
|  | 394 | set_type, 0); | 
|  | 395 | static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, | 
|  | 396 | STATUS1_DIODE_FAULT); | 
|  | 397 |  | 
|  | 398 | static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | 
|  | 399 | set_interval); | 
|  | 400 |  | 
|  | 401 | static struct attribute *lm95245_attributes[] = { | 
|  | 402 | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | 403 | &sensor_dev_attr_temp1_crit.dev_attr.attr, | 
|  | 404 | &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, | 
|  | 405 | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, | 
|  | 406 | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | 407 | &sensor_dev_attr_temp2_crit.dev_attr.attr, | 
|  | 408 | &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | 
|  | 409 | &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | 
|  | 410 | &sensor_dev_attr_temp2_type.dev_attr.attr, | 
|  | 411 | &sensor_dev_attr_temp2_fault.dev_attr.attr, | 
|  | 412 | &dev_attr_update_interval.attr, | 
|  | 413 | NULL | 
|  | 414 | }; | 
|  | 415 |  | 
|  | 416 | static const struct attribute_group lm95245_group = { | 
|  | 417 | .attrs = lm95245_attributes, | 
|  | 418 | }; | 
|  | 419 |  | 
|  | 420 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
|  | 421 | static int lm95245_detect(struct i2c_client *new_client, | 
|  | 422 | struct i2c_board_info *info) | 
|  | 423 | { | 
|  | 424 | struct i2c_adapter *adapter = new_client->adapter; | 
|  | 425 |  | 
|  | 426 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
|  | 427 | return -ENODEV; | 
|  | 428 |  | 
|  | 429 | if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID) | 
|  | 430 | != MANUFACTURER_ID | 
|  | 431 | || i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID) | 
|  | 432 | != DEFAULT_REVISION) | 
|  | 433 | return -ENODEV; | 
|  | 434 |  | 
|  | 435 | strlcpy(info->type, DEVNAME, I2C_NAME_SIZE); | 
|  | 436 | return 0; | 
|  | 437 | } | 
|  | 438 |  | 
|  | 439 | static void lm95245_init_client(struct i2c_client *client) | 
|  | 440 | { | 
|  | 441 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 442 |  | 
|  | 443 | data->valid = 0; | 
|  | 444 | data->interval = lm95245_read_conversion_rate(client); | 
|  | 445 |  | 
|  | 446 | data->config1 = i2c_smbus_read_byte_data(client, | 
|  | 447 | LM95245_REG_RW_CONFIG1); | 
|  | 448 | data->config2 = i2c_smbus_read_byte_data(client, | 
|  | 449 | LM95245_REG_RW_CONFIG2); | 
|  | 450 |  | 
|  | 451 | if (data->config1 & CFG_STOP) { | 
|  | 452 | /* Clear the standby bit */ | 
|  | 453 | data->config1 &= ~CFG_STOP; | 
|  | 454 | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1, | 
|  | 455 | data->config1); | 
|  | 456 | } | 
|  | 457 | } | 
|  | 458 |  | 
|  | 459 | static int lm95245_probe(struct i2c_client *new_client, | 
|  | 460 | const struct i2c_device_id *id) | 
|  | 461 | { | 
|  | 462 | struct lm95245_data *data; | 
|  | 463 | int err; | 
|  | 464 |  | 
|  | 465 | data = kzalloc(sizeof(struct lm95245_data), GFP_KERNEL); | 
|  | 466 | if (!data) { | 
|  | 467 | err = -ENOMEM; | 
|  | 468 | goto exit; | 
|  | 469 | } | 
|  | 470 |  | 
|  | 471 | i2c_set_clientdata(new_client, data); | 
|  | 472 | mutex_init(&data->update_lock); | 
|  | 473 |  | 
|  | 474 | /* Initialize the LM95245 chip */ | 
|  | 475 | lm95245_init_client(new_client); | 
|  | 476 |  | 
|  | 477 | /* Register sysfs hooks */ | 
|  | 478 | err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group); | 
|  | 479 | if (err) | 
|  | 480 | goto exit_free; | 
|  | 481 |  | 
|  | 482 | data->hwmon_dev = hwmon_device_register(&new_client->dev); | 
|  | 483 | if (IS_ERR(data->hwmon_dev)) { | 
|  | 484 | err = PTR_ERR(data->hwmon_dev); | 
|  | 485 | goto exit_remove_files; | 
|  | 486 | } | 
|  | 487 |  | 
|  | 488 | return 0; | 
|  | 489 |  | 
|  | 490 | exit_remove_files: | 
|  | 491 | sysfs_remove_group(&new_client->dev.kobj, &lm95245_group); | 
|  | 492 | exit_free: | 
|  | 493 | kfree(data); | 
|  | 494 | exit: | 
|  | 495 | return err; | 
|  | 496 | } | 
|  | 497 |  | 
|  | 498 | static int lm95245_remove(struct i2c_client *client) | 
|  | 499 | { | 
|  | 500 | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | 501 |  | 
|  | 502 | hwmon_device_unregister(data->hwmon_dev); | 
|  | 503 | sysfs_remove_group(&client->dev.kobj, &lm95245_group); | 
|  | 504 |  | 
|  | 505 | kfree(data); | 
|  | 506 | return 0; | 
|  | 507 | } | 
|  | 508 |  | 
|  | 509 | /* Driver data (common to all clients) */ | 
|  | 510 | static const struct i2c_device_id lm95245_id[] = { | 
|  | 511 | { DEVNAME, 0 }, | 
|  | 512 | { } | 
|  | 513 | }; | 
|  | 514 | MODULE_DEVICE_TABLE(i2c, lm95245_id); | 
|  | 515 |  | 
|  | 516 | static struct i2c_driver lm95245_driver = { | 
|  | 517 | .class		= I2C_CLASS_HWMON, | 
|  | 518 | .driver = { | 
|  | 519 | .name	= DEVNAME, | 
|  | 520 | }, | 
|  | 521 | .probe		= lm95245_probe, | 
|  | 522 | .remove		= lm95245_remove, | 
|  | 523 | .id_table	= lm95245_id, | 
|  | 524 | .detect		= lm95245_detect, | 
|  | 525 | .address_list	= normal_i2c, | 
|  | 526 | }; | 
|  | 527 |  | 
| Axel Lin | f0967ee | 2012-01-20 15:38:18 +0800 | [diff] [blame] | 528 | module_i2c_driver(lm95245_driver); | 
| Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 529 |  | 
|  | 530 | MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); | 
|  | 531 | MODULE_DESCRIPTION("LM95245 sensor driver"); | 
|  | 532 | MODULE_LICENSE("GPL"); |